diff options
65 files changed, 1040 insertions, 1190 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e34bf0272da4..f785b49bf1f5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -235,6 +235,7 @@ config ARCH_INTEGRATOR select ICST select GENERIC_CLOCKEVENTS select PLAT_VERSATILE + select PLAT_VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. @@ -242,11 +243,11 @@ config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA select CLKDEV_LOOKUP - select HAVE_SCHED_CLOCK select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB help @@ -257,11 +258,12 @@ config ARCH_VERSATILE select ARM_AMBA select ARM_VIC select CLKDEV_LOOKUP - select HAVE_SCHED_CLOCK select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD + select PLAT_VERSATILE_FPGA_IRQ select ARM_TIMER_SP804 help This enables support for ARM Ltd Versatile board. @@ -274,9 +276,10 @@ config ARCH_VEXPRESS select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select HAVE_CLK - select HAVE_SCHED_CLOCK + select HAVE_PATA_PLATFORM select ICST select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD help This enables support for the ARM Ltd Versatile Express boards. @@ -1008,6 +1011,7 @@ source "arch/arm/mach-ux500/Kconfig" source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" +source "arch/arm/plat-versatile/Kconfig" source "arch/arm/mach-vt8500/Kconfig" diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h index 6bc63ab498ce..080d74f8128d 100644 --- a/arch/arm/include/asm/localtimer.h +++ b/arch/arm/include/asm/localtimer.h @@ -44,8 +44,14 @@ int local_timer_ack(void); /* * Setup a local timer interrupt for a CPU. */ -void local_timer_setup(struct clock_event_device *); +int local_timer_setup(struct clock_event_device *); +#else + +static inline int local_timer_setup(struct clock_event_device *evt) +{ + return -ENXIO; +} #endif #endif diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index 348d513afa92..d8387437ec5a 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -21,6 +21,8 @@ #ifndef __ASM_OUTERCACHE_H #define __ASM_OUTERCACHE_H +#include <linux/types.h> + struct outer_cache_fns { void (*inv_range)(unsigned long, unsigned long); void (*clean_range)(unsigned long, unsigned long); @@ -38,17 +40,17 @@ struct outer_cache_fns { extern struct outer_cache_fns outer_cache; -static inline void outer_inv_range(unsigned long start, unsigned long end) +static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.inv_range) outer_cache.inv_range(start, end); } -static inline void outer_clean_range(unsigned long start, unsigned long end) +static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.clean_range) outer_cache.clean_range(start, end); } -static inline void outer_flush_range(unsigned long start, unsigned long end) +static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.flush_range) outer_cache.flush_range(start, end); @@ -74,11 +76,11 @@ static inline void outer_disable(void) #else -static inline void outer_inv_range(unsigned long start, unsigned long end) +static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) { } -static inline void outer_clean_range(unsigned long start, unsigned long end) +static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) { } -static inline void outer_flush_range(unsigned long start, unsigned long end) +static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { } static inline void outer_flush_all(void) { } static inline void outer_inv_all(void) { } diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index ebcb6432f45f..5750704e0271 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -301,6 +301,7 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; #define pgd_present(pgd) (1) #define pgd_clear(pgdp) do { } while (0) #define set_pgd(pgd,pgdp) do { } while (0) +#define set_pud(pud,pudp) do { } while (0) /* Find an entry in the second-level page table.. */ @@ -351,7 +352,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_unmap(pte) __pte_unmap(pte) #define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) -#define pfn_pte(pfn,prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot)) #define pte_page(pte) pfn_to_page(pte_pfn(pte)) #define mk_pte(page,prot) pfn_pte(page_to_pfn(page), prot) diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index da8b52ec49cf..95176af3df8c 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -195,7 +195,7 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } #define NR_BANKS 8 struct membank { - unsigned long start; + phys_addr_t start; unsigned long size; unsigned int highmem; }; diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 44b84fe6e1b0..8dbc126f7152 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -238,8 +238,8 @@ static int enable_monitor_mode(void) ARM_DBG_READ(c1, 0, dscr); /* Ensure that halting mode is disabled. */ - if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, "halting debug mode enabled." - "Unable to access hardware resources.")) { + if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, + "halting debug mode enabled. Unable to access hardware resources.\n")) { ret = -EPERM; goto out; } @@ -377,7 +377,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp) } } - if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) { + if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) { ret = -EBUSY; goto out; } @@ -423,7 +423,7 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) } } - if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) + if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) return; /* Reset the control register. */ @@ -635,7 +635,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) if (WARN_ONCE(!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps() || !bp->hw.bp_target), - "overflow handler required but none found")) { + "overflow handler required but none found\n")) { ret = -EINVAL; } out: @@ -936,8 +936,8 @@ static int __init arch_hw_breakpoint_init(void) ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { max_watchpoint_len = 4; - pr_warning("halting debug mode enabled. Assuming maximum " - "watchpoint size of %u bytes.", max_watchpoint_len); + pr_warning("halting debug mode enabled. Assuming maximum watchpoint size of %u bytes.\n", + max_watchpoint_len); } else { /* Work out the maximum supported watchpoint length. */ max_watchpoint_len = get_max_wp_len(); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index d1da92174277..d149539ccd68 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -466,13 +466,13 @@ static struct machine_desc * __init setup_machine(unsigned int nr) /* can't use cpu_relax() here as it may require MMU setup */; } -static int __init arm_add_memory(unsigned long start, unsigned long size) +static int __init arm_add_memory(phys_addr_t start, unsigned long size) { struct membank *bank = &meminfo.bank[meminfo.nr_banks]; if (meminfo.nr_banks >= NR_BANKS) { printk(KERN_CRIT "NR_BANKS too low, " - "ignoring memory at %#lx\n", start); + "ignoring memory at 0x%08llx\n", (long long)start); return -EINVAL; } @@ -502,7 +502,8 @@ static int __init arm_add_memory(unsigned long start, unsigned long size) static int __init early_mem(char *p) { static int usermem __initdata = 0; - unsigned long size, start; + unsigned long size; + phys_addr_t start; char *endp; /* diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 4539ebcb089f..8fe05ad932e4 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -474,13 +474,12 @@ static void smp_timer_broadcast(const struct cpumask *mask) #define smp_timer_broadcast NULL #endif -#ifndef CONFIG_LOCAL_TIMERS static void broadcast_timer_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { } -static void local_timer_setup(struct clock_event_device *evt) +static void broadcast_timer_setup(struct clock_event_device *evt) { evt->name = "dummy_timer"; evt->features = CLOCK_EVT_FEAT_ONESHOT | @@ -492,7 +491,6 @@ static void local_timer_setup(struct clock_event_device *evt) clockevents_register_device(evt); } -#endif void __cpuinit percpu_timer_setup(void) { @@ -502,7 +500,8 @@ void __cpuinit percpu_timer_setup(void) evt->cpumask = cpumask_of(cpu); evt->broadcast = smp_timer_broadcast; - local_timer_setup(evt); + if (local_timer_setup(evt)) + broadcast_timer_setup(evt); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 21ac43f1c2d0..f0000e188c8c 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -712,17 +712,17 @@ EXPORT_SYMBOL(__readwrite_bug); void __pte_error(const char *file, int line, pte_t pte) { - printk("%s:%d: bad pte %08lx.\n", file, line, pte_val(pte)); + printk("%s:%d: bad pte %08llx.\n", file, line, (long long)pte_val(pte)); } void __pmd_error(const char *file, int line, pmd_t pmd) { - printk("%s:%d: bad pmd %08lx.\n", file, line, pmd_val(pmd)); + printk("%s:%d: bad pmd %08llx.\n", file, line, (long long)pmd_val(pmd)); } void __pgd_error(const char *file, int line, pgd_t pgd) { - printk("%s:%d: bad pgd %08lx.\n", file, line, pgd_val(pgd)); + printk("%s:%d: bad pgd %08llx.\n", file, line, (long long)pgd_val(pgd)); } asmlinkage void __div0(void) diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index e2d2f2cd0c4f..8b9b13649f81 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -27,13 +27,18 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) pgd_t *pgd; pmd_t *pmd; pte_t *pte; + pud_t *pud; spinlock_t *ptl; pgd = pgd_offset(current->mm, addr); if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd))) return 0; - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + if (unlikely(pud_none(*pud) || pud_bad(*pud))) + return 0; + + pmd = pmd_offset(pud, addr); if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd))) return 0; diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 769b0f10c834..d701d32a07f1 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -13,6 +13,7 @@ config ARCH_INTEGRATOR_CP bool "Support Integrator/CP platform" select ARCH_CINTEGRATOR select ARM_TIMER_SP804 + select PLAT_VERSATILE_CLCD help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index 5f96e1518aa9..a08f9b0299df 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1 +1,2 @@ +void integrator_init_early(void); void integrator_reserve(void); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index b8e884b450da..77315b995681 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -144,12 +144,15 @@ static struct clk_lookup lookups[] = { } }; +void __init integrator_init_early(void) +{ + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); +} + static int __init integrator_init(void) { int i; - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; amba_device_register(d, &iomem_resource); diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 5db574f8ae3f..8cbb75a96bd4 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -121,6 +121,7 @@ static struct clcd_panel vga = { .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, .connector = IMPD1_CTRL_DISP_VGA, .bpp = 16, .grayscale = 0, @@ -149,6 +150,7 @@ static struct clcd_panel svga = { .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), .connector = IMPD1_CTRL_DISP_VGA, + .caps = CLCD_CAP_5551, .bpp = 16, .grayscale = 0, }; @@ -175,6 +177,7 @@ static struct clcd_panel prospector = { .height = -1, .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, .fixedtimings = 1, .connector = IMPD1_CTRL_DISP_LCD, .bpp = 16, @@ -206,6 +209,7 @@ static struct clcd_panel ltm10c209 = { .height = -1, .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, .fixedtimings = 1, .connector = IMPD1_CTRL_DISP_LCD, .bpp = 16, @@ -279,6 +283,7 @@ static void impd1fb_clcd_remove(struct clcd_fb *fb) static struct clcd_board impd1_clcd_data = { .name = "IM-PD/1", + .caps = CLCD_CAP_5551 | CLCD_CAP_888, .check = clcdfb_check, .decode = clcdfb_decode, .disable = impd1fb_clcd_disable, diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h index 1ab353e23595..445d57adb043 100644 --- a/arch/arm/mach-integrator/include/mach/cm.h +++ b/arch/arm/mach-integrator/include/mach/cm.h @@ -24,9 +24,9 @@ void cm_control(u32, u32); #define CM_CTRL_LCDBIASDN (1 << 10) #define CM_CTRL_LCDMUXSEL_MASK (7 << 11) #define CM_CTRL_LCDMUXSEL_GENLCD (1 << 11) -#define CM_CTRL_LCDMUXSEL_VGA_16BPP (2 << 11) +#define CM_CTRL_LCDMUXSEL_VGA565_TFT555 (2 << 11) #define CM_CTRL_LCDMUXSEL_SHARPLCD (3 << 11) -#define CM_CTRL_LCDMUXSEL_VGA_8421BPP (4 << 11) +#define CM_CTRL_LCDMUXSEL_VGA555_TFT555 (4 << 11) #define CM_CTRL_LCDEN0 (1 << 14) #define CM_CTRL_LCDEN1 (1 << 15) #define CM_CTRL_STATIC1 (1 << 16) diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index b666443b5cbb..980803ff348c 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -48,6 +48,8 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <plat/fpga-irq.h> + #include "common.h" /* @@ -57,10 +59,10 @@ * Setup a VA for the Integrator interrupt controller (for header #0, * just for now). */ -#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) -#define VA_SC_BASE IO_ADDRESS(INTEGRATOR_SC_BASE) -#define VA_EBI_BASE IO_ADDRESS(INTEGRATOR_EBI_BASE) -#define VA_CMIC_BASE IO_ADDRESS(INTEGRATOR_HDR_IC) +#define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE) +#define VA_SC_BASE __io_address(INTEGRATOR_SC_BASE) +#define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE) +#define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC) /* * Logical Physical @@ -156,27 +158,14 @@ static void __init ap_map_io(void) #define INTEGRATOR_SC_VALID_INT 0x003fffff -static void sc_mask_irq(struct irq_data *d) -{ - writel(1 << d->irq, VA_IC_BASE + IRQ_ENABLE_CLEAR); -} - -static void sc_unmask_irq(struct irq_data *d) -{ - writel(1 << d->irq, VA_IC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip sc_chip = { - .name = "SC", - .irq_ack = sc_mask_irq, - .irq_mask = sc_mask_irq, - .irq_unmask = sc_unmask_irq, +static struct fpga_irq_data sc_irq_data = { + .base = VA_IC_BASE, + .irq_start = 0, + .chip.name = "SC", }; static void __init ap_init_irq(void) { - unsigned int i; - /* Disable all interrupts initially. */ /* Do the core module ones */ writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); @@ -185,13 +174,7 @@ static void __init ap_init_irq(void) writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR); writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); - for (i = 0; i < NR_IRQS; i++) { - if (((1 << i) & INTEGRATOR_SC_VALID_INT) != 0) { - set_irq_chip(i, &sc_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - } + fpga_irq_init(-1, INTEGRATOR_SC_VALID_INT, &sc_irq_data); } #ifdef CONFIG_PM @@ -282,7 +265,7 @@ static void ap_flash_exit(void) static void ap_flash_set_vpp(int on) { - unsigned long reg = on ? SC_CTRLS : SC_CTRLC; + void __iomem *reg = on ? SC_CTRLS : SC_CTRLC; writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg); } @@ -499,8 +482,9 @@ static struct sys_timer ap_timer = { MACHINE_START(INTEGRATOR, "ARM-Integrator") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, - .map_io = ap_map_io, .reserve = integrator_reserve, + .map_io = ap_map_io, + .init_early = integrator_init_early, .init_irq = ap_init_irq, .timer = &ap_timer, .init_machine = ap_init, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index e9327da1382e..9e3ce26023e8 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -42,6 +42,10 @@ #include <asm/hardware/timer-sp.h> +#include <plat/clcd.h> +#include <plat/fpga-irq.h> +#include <plat/sched_clock.h> + #include "common.h" #define INTCP_PA_FLASH_BASE 0x24000000 @@ -49,9 +53,9 @@ #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE + 0x40) -#define INTCP_VA_PIC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) -#define INTCP_VA_SIC_BASE IO_ADDRESS(INTEGRATOR_CP_SIC_BASE) +#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40) +#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE) +#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE) #define INTCP_ETH_SIZE 0x10 @@ -139,129 +143,48 @@ static void __init intcp_map_io(void) iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc)); } -#define cic_writel __raw_writel -#define cic_readl __raw_readl -#define pic_writel __raw_writel -#define pic_readl __raw_readl -#define sic_writel __raw_writel -#define sic_readl __raw_readl - -static void cic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_CIC_START; - cic_writel(1 << irq, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); -} - -static void cic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_CIC_START; - cic_writel(1 << irq, INTCP_VA_CIC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip cic_chip = { - .name = "CIC", - .irq_ack = cic_mask_irq, - .irq_mask = cic_mask_irq, - .irq_unmask = cic_unmask_irq, +static struct fpga_irq_data cic_irq_data = { + .base = INTCP_VA_CIC_BASE, + .irq_start = IRQ_CIC_START, + .chip.name = "CIC", }; -static void pic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_PIC_START; - pic_writel(1 << irq, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); -} - -static void pic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_PIC_START; - pic_writel(1 << irq, INTCP_VA_PIC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip pic_chip = { - .name = "PIC", - .irq_ack = pic_mask_irq, - .irq_mask = pic_mask_irq, - .irq_unmask = pic_unmask_irq, +static struct fpga_irq_data pic_irq_data = { + .base = INTCP_VA_PIC_BASE, + .irq_start = IRQ_PIC_START, + .chip.name = "PIC", }; -static void sic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - sic_writel(1 << irq, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); -} - -static void sic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - sic_writel(1 << irq, INTCP_VA_SIC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip sic_chip = { - .name = "SIC", - .irq_ack = sic_mask_irq, - .irq_mask = sic_mask_irq, - .irq_unmask = sic_unmask_irq, +static struct fpga_irq_data sic_irq_data = { + .base = INTCP_VA_SIC_BASE, + .irq_start = IRQ_SIC_START, + .chip.name = "SIC", }; -static void -sic_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - unsigned long status = sic_readl(INTCP_VA_SIC_BASE + IRQ_STATUS); - - if (status == 0) { - do_bad_IRQ(irq, desc); - return; - } - - do { - irq = ffs(status) - 1; - status &= ~(1 << irq); - - irq += IRQ_SIC_START; - - generic_handle_irq(irq); - } while (status); -} - static void __init intcp_init_irq(void) { - unsigned int i; + u32 pic_mask, sic_mask; + + pic_mask = ~((~0u) << (11 - IRQ_PIC_START)); + pic_mask |= (~((~0u) << (29 - 22))) << 22; + sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); /* * Disable all interrupt sources */ - pic_writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); - pic_writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); - - for (i = IRQ_PIC_START; i <= IRQ_PIC_END; i++) { - if (i == 11) - i = 22; - if (i == 29) - break; - set_irq_chip(i, &pic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } + writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); + writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); + writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); - cic_writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); - cic_writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); + fpga_irq_init(-1, pic_mask, &pic_irq_data); - for (i = IRQ_CIC_START; i <= IRQ_CIC_END; i++) { - set_irq_chip(i, &cic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } - - sic_writel(0x00000fff, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); - sic_writel(0x00000fff, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); - - for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) { - set_irq_chip(i, &sic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } + fpga_irq_init(-1, ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)), + &cic_irq_data); - set_irq_chained_handler(IRQ_CP_CPPLDINT, sic_handle_irq); + fpga_irq_init(IRQ_CP_CPPLDINT, sic_mask, &sic_irq_data); } /* @@ -449,43 +372,21 @@ static struct amba_device aaci_device = { /* * CLCD support */ -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, - .grayscale = 0, -}; - /* * Ensure VGA is selected. */ static void cp_clcd_enable(struct clcd_fb *fb) { - u32 val; + struct fb_var_screeninfo *var = &fb->fb.var; + u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2; - if (fb->fb.var.bits_per_pixel <= 8) - val = CM_CTRL_LCDMUXSEL_VGA_8421BPP; + if (var->bits_per_pixel <= 8 || + (var->bits_per_pixel == 16 && var->green.length == 5)) + /* Pseudocolor, RGB555, BGR555 */ + val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555; else if (fb->fb.var.bits_per_pixel <= 16) - val = CM_CTRL_LCDMUXSEL_VGA_16BPP - | CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1 - | CM_CTRL_STATIC1 | CM_CTRL_STATIC2; + /* truecolor RGB565 */ + val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555; else val = 0; /* no idea for this, don't trust the docs */ @@ -498,49 +399,24 @@ static void cp_clcd_enable(struct clcd_fb *fb) CM_CTRL_n24BITEN, val); } -static unsigned long framesize = SZ_1M; - static int cp_clcd_setup(struct clcd_fb *fb) { - dma_addr_t dma; - - fb->panel = &vga; - - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; - - return 0; -} - -static int cp_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} + fb->panel = versatile_clcd_get_panel("VGA"); + if (!fb->panel) + return -EINVAL; -static void cp_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, SZ_1M); } static struct clcd_board clcd_data = { .name = "Integrator/CP", + .caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888, .check = clcdfb_check, .decode = clcdfb_decode, .enable = cp_clcd_enable, .setup = cp_clcd_setup, - .mmap = cp_clcd_mmap, - .remove = cp_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; static struct amba_device clcd_device = { @@ -565,11 +441,23 @@ static struct amba_device *amba_devs[] __initdata = { &clcd_device, }; +#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28) + +static void __init intcp_init_early(void) +{ + clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups)); + + integrator_init_early(); + +#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK + versatile_sched_clock_init(REFCOUNTER, 24000000); +#endif +} + static void __init intcp_init(void) { int i; - clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups)); platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs)); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { @@ -599,8 +487,9 @@ static struct sys_timer cp_timer = { MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, - .map_io = intcp_map_io, .reserve = integrator_reserve, + .map_io = intcp_map_io, + .init_early = intcp_init_early, .init_irq = intcp_init_irq, .timer = &cp_timer, .init_machine = intcp_init, diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index c105d28b53e3..ae85aa951806 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -255,7 +255,7 @@ static void __init msm_timer_init(void) } #ifdef CONFIG_SMP -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER]; @@ -287,6 +287,7 @@ void __cpuinit local_timer_setup(struct clock_event_device *evt) gic_enable_ppi(clock->irq.irq); clockevents_register_device(evt); + return 0; } inline int local_timer_ack(void) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b69fa0a0299e..6819c64594ef 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -44,6 +44,7 @@ config ARCH_OMAP4 depends on ARCH_OMAP2PLUS select CPU_V7 select ARM_GIC + select LOCAL_TIMERS if SMP select PL310_ERRATA_588369 select PL310_ERRATA_727915 select ARM_ERRATA_720789 diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c index 954682e64399..31c0ac4cd66a 100644 --- a/arch/arm/mach-omap2/timer-mpu.c +++ b/arch/arm/mach-omap2/timer-mpu.c @@ -26,9 +26,14 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { + /* Local timers are not supprted on OMAP4430 ES1.0 */ + if (omap_rev() == OMAP4430_REV_ES1_0) + return -ENXIO; + evt->irq = OMAP44XX_IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index a01b76b7c956..541fa4c109ef 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -8,6 +8,5 @@ obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 1c6602cf50e4..75dbc8791d05 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -51,6 +51,7 @@ #include <mach/irqs.h> #include <asm/hardware/timer-sp.h> +#include <plat/clcd.h> #include <plat/sched_clock.h> #include "core.h" @@ -359,18 +360,19 @@ static struct clk_lookup lookups[] = { } }; -static int __init clk_init(void) +void __init realview_init_early(void) { + void __iomem *sys = __io_address(REALVIEW_SYS_BASE); + if (machine_is_realview_pb1176()) - oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; + oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET; else - oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; + oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET; clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - return 0; + versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000); } -core_initcall(clk_init); /* * CLCD support. @@ -385,157 +387,6 @@ core_initcall(clk_init); #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) #define SYS_CLCD_ID_VGA (0x1f << 8) -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel xvga = { - .mode = { - .name = "XVGA", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15748, - .left_margin = 152, - .right_margin = 48, - .upper_margin = 23, - .lower_margin = 3, - .hsync_len = 104, - .vsync_len = 4, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_3_8_in = { - .mode = { - .name = "Sanyo QVGA", - .refresh = 116, - .xres = 320, - .yres = 240, - .pixclock = 100000, - .left_margin = 6, - .right_margin = 6, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 6, - .vsync_len = 6, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_2_5_in = { - .mode = { - .name = "Sanyo QVGA Portrait", - .refresh = 116, - .xres = 240, - .yres = 320, - .pixclock = 100000, - .left_margin = 20, - .right_margin = 10, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 10, - .vsync_len = 2, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel epson_2_2_in = { - .mode = { - .name = "Epson QCIF", - .refresh = 390, - .xres = 176, - .yres = 220, - .pixclock = 62500, - .left_margin = 3, - .right_margin = 2, - .upper_margin = 1, - .lower_margin = 0, - .hsync_len = 3, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static struct clcd_panel *realview_clcd_panel(void) -{ - void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; - struct clcd_panel *vga_panel; - struct clcd_panel *panel; - u32 val; - - if (machine_is_realview_eb()) - vga_panel = &vga; - else - vga_panel = &xvga; - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel = &sanyo_3_8_in; - else if (val == SYS_CLCD_ID_SANYO_2_5) - panel = &sanyo_2_5_in; - else if (val == SYS_CLCD_ID_EPSON_2_2) - panel = &epson_2_2_in; - else if (val == SYS_CLCD_ID_VGA) - panel = vga_panel; - else { - printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", - val); - panel = vga_panel; - } - - return panel; -} - /* * Disable all display connectors on the interface module. */ @@ -565,56 +416,60 @@ static void realview_clcd_enable(struct clcd_fb *fb) writel(val, sys_clcd); } +/* + * Detect which LCD panel is connected, and return the appropriate + * clcd_panel structure. Note: we do not have any information on + * the required timings for the 8.4in panel, so we presently assume + * VGA timings. + */ static int realview_clcd_setup(struct clcd_fb *fb) { + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + const char *panel_name, *vga_panel_name; unsigned long framesize; - dma_addr_t dma; + u32 val; - if (machine_is_realview_eb()) + if (machine_is_realview_eb()) { /* VGA, 16bpp */ framesize = 640 * 480 * 2; - else + vga_panel_name = "VGA"; + } else { /* XVGA, 16bpp */ framesize = 1024 * 768 * 2; - - fb->panel = realview_clcd_panel(); - - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL | GFP_DMA); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; + vga_panel_name = "XVGA"; } - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; - - return 0; -} + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; + if (val == SYS_CLCD_ID_SANYO_3_8) + panel_name = "Sanyo TM38QV67A02A"; + else if (val == SYS_CLCD_ID_SANYO_2_5) + panel_name = "Sanyo QVGA Portrait"; + else if (val == SYS_CLCD_ID_EPSON_2_2) + panel_name = "Epson L2F50113T00"; + else if (val == SYS_CLCD_ID_VGA) + panel_name = vga_panel_name; + else { + pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val); + panel_name = vga_panel_name; + } -static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} + fb->panel = versatile_clcd_get_panel(panel_name); + if (!fb->panel) + return -EINVAL; -static void realview_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, framesize); } struct clcd_board clcd_plat_data = { .name = "RealView", + .caps = CLCD_CAP_ALL, .check = clcdfb_check, .decode = clcdfb_decode, .disable = realview_clcd_disable, .enable = realview_clcd_enable, .setup = realview_clcd_setup, - .mmap = realview_clcd_mmap, - .remove = realview_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; #ifdef CONFIG_LEDS @@ -656,12 +511,6 @@ void realview_leds_event(led_event_t ledevt) #endif /* CONFIG_LEDS */ /* - * The sched_clock counter - */ -#define REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + \ - REALVIEW_SYS_24MHz_OFFSET) - -/* * Where is the timer (VA)? */ void __iomem *timer0_va_base; @@ -676,8 +525,6 @@ void __init realview_timer_init(unsigned int timer_irq) { u32 val; - versatile_sched_clock_init(REFCOUNTER, 24000000); - /* * set clock frequency: * REALVIEW_REFCLK is 32KHz diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 693239ddc39e..5c83d1e87a03 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -42,7 +42,6 @@ static struct amba_device name##_device = { \ }, \ .dma_mask = ~0, \ .irq = base##_IRQ, \ - /* .dma = base##_DMA,*/ \ } struct machine_desc; @@ -63,6 +62,7 @@ extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); +extern void realview_init_early(void); extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from, struct meminfo *meminfo); extern void (*realview_reset)(char); diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S deleted file mode 100644 index b34be4554d40..000000000000 --- a/arch/arm/mach-realview/headsmp.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/arch/arm/mach-realview/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> - - __INIT - -/* - * Realview specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(realview_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup - - .align -1: .long . - .long pen_release diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c deleted file mode 100644 index 60b4e111f459..000000000000 --- a/arch/arm/mach-realview/localtimer.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/arch/arm/mach-realview/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/clockchips.h> - -#include <asm/irq.h> -#include <asm/smp_twd.h> -#include <asm/localtimer.h> - -/* - * Setup the local clock events for a CPU. - */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); -} diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 6959d13d908a..23919229e12d 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -10,44 +10,21 @@ */ #include <linux/init.h> #include <linux/errno.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <asm/cacheflush.h> #include <mach/hardware.h> #include <asm/mach-types.h> +#include <asm/smp_scu.h> #include <asm/unified.h> #include <mach/board-eb.h> #include <mach/board-pb11mp.h> #include <mach/board-pbx.h> -#include <asm/smp_scu.h> #include "core.h" -extern void realview_secondary_startup(void); - -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int __cpuinitdata pen_release = -1; - -/* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency - * or not. This is necessary for the hotplug code to work reliably. - */ -static void __cpuinit write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); - outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); -} +extern void versatile_secondary_startup(void); static void __iomem *scu_base_addr(void) { @@ -62,75 +39,6 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0; } -static DEFINE_SPINLOCK(boot_lock); - -void __cpuinit platform_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - write_pen_release(cpu); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - smp_cross_call(cpumask_of(cpu), 1); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. @@ -174,6 +82,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), + __raw_writel(BSYM(virt_to_phys(versatile_secondary_startup)), __io_address(REALVIEW_SYS_FLAGSSET)); } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 8ede983b861c..2ecc1d94284e 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -144,60 +144,39 @@ static struct pl022_ssp_controller ssp0_plat_data = { * These devices are connected via the core APB bridge */ #define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_EB_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } /* * These devices are connected directly to the multi-layer AHB switch */ #define EB_SMC_IRQ { NO_IRQ, NO_IRQ } -#define EB_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } -#define EB_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } -#define DMAC_DMA { 0, 0 } /* * These devices are connected via the core APB bridge */ #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } -#define EB_WATCHDOG_DMA { 0, 0 } #define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } -#define EB_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ } -#define EB_RTC_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge */ #define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ } -#define EB_UART0_DMA { 15, 14 } #define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ } -#define EB_UART1_DMA { 13, 12 } #define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ } -#define EB_UART2_DMA { 11, 10 } #define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ } -#define EB_UART3_DMA { 0x86, 0x87 } #define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ } -#define EB_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); @@ -487,6 +466,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_eb_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_eb_timer, .init_machine = realview_eb_init, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 9f26369555c7..eab6070f66d0 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -134,47 +134,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PB1176 AMBA devices */ #define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } -#define PB1176_CLCD_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } -#define PB1176_WATCHDOG_DMA { 0, 0 } #define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ } -#define PB1176_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ } -#define PB1176_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ } -#define PB1176_UART0_DMA { 15, 14 } #define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ } -#define PB1176_UART1_DMA { 13, 12 } #define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ } -#define PB1176_UART2_DMA { 11, 10 } #define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } -#define PB1176_UART3_DMA { 0x86, 0x87 } #define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ } -#define PB1176_UART4_DMA { 0, 0 } #define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ } -#define PB1176_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); @@ -382,6 +361,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, .init_machine = realview_pb1176_init, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index dea06b2da3a2..b2985fc7cd4e 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -136,47 +136,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } -#define PB11MP_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } -#define PB11MP_WATCHDOG_DMA { 0, 0 } #define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } -#define PB11MP_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } -#define PB11MP_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } -#define PB11MP_UART0_DMA { 15, 14 } #define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } -#define PB11MP_UART1_DMA { 13, 12 } #define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } -#define PB11MP_UART2_DMA { 11, 10 } #define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } -#define PB11MP_UART3_DMA { 0x86, 0x87 } #define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } -#define PB11MP_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); @@ -384,6 +363,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, .init_machine = realview_pb11mp_init, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 7d0f1734a217..fb6866558760 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -126,47 +126,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ } -#define PBA8_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ } -#define PBA8_WATCHDOG_DMA { 0, 0 } #define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ } -#define PBA8_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ } -#define PBA8_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ } -#define PBA8_UART0_DMA { 15, 14 } #define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ } -#define PBA8_UART1_DMA { 13, 12 } #define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ } -#define PBA8_UART2_DMA { 11, 10 } #define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ } -#define PBA8_UART3_DMA { 0x86, 0x87 } #define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ } -#define PBA8_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); @@ -334,6 +313,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pba8_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pba8_timer, .init_machine = realview_pba8_init, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index b89e28f8853e..92ace2cf2b2c 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -148,47 +148,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PBX_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PBX_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ } -#define PBX_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ } -#define PBX_WATCHDOG_DMA { 0, 0 } #define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ } -#define PBX_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ } -#define PBX_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ } -#define PBX_UART0_DMA { 15, 14 } #define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ } -#define PBX_UART1_DMA { 13, 12 } #define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ } -#define PBX_UART2_DMA { 11, 10 } #define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ } -#define PBX_UART3_DMA { 0x86, 0x87 } #define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ } -#define PBX_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); @@ -417,6 +396,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, .init_machine = realview_pbx_init, diff --git a/arch/arm/mach-s5pv310/localtimer.c b/arch/arm/mach-s5pv310/localtimer.c index 2784036cd8b1..8239c6a684a1 100644 --- a/arch/arm/mach-s5pv310/localtimer.c +++ b/arch/arm/mach-s5pv310/localtimer.c @@ -18,8 +18,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-shmobile/localtimer.c b/arch/arm/mach-shmobile/localtimer.c index 2111c28b724e..ad9ccc9900c8 100644 --- a/arch/arm/mach-shmobile/localtimer.c +++ b/arch/arm/mach-shmobile/localtimer.c @@ -18,8 +18,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = 29; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-tegra/localtimer.c b/arch/arm/mach-tegra/localtimer.c index f81ca7cbbc1f..e91d681d45a2 100644 --- a/arch/arm/mach-tegra/localtimer.c +++ b/arch/arm/mach-tegra/localtimer.c @@ -18,8 +18,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c index 2288f6a7c518..5ba113309a0b 100644 --- a/arch/arm/mach-ux500/localtimer.c +++ b/arch/arm/mach-ux500/localtimer.c @@ -21,8 +21,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 136c32e7ed8e..eb7ffa0ee8b5 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -50,6 +50,8 @@ #include <mach/platform.h> #include <asm/hardware/timer-sp.h> +#include <plat/clcd.h> +#include <plat/fpga-irq.h> #include <plat/sched_clock.h> #include "core.h" @@ -63,47 +65,12 @@ #define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE) #define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE) -static void sic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - - writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR); -} - -static void sic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - - writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET); -} - -static struct irq_chip sic_chip = { - .name = "SIC", - .irq_ack = sic_mask_irq, - .irq_mask = sic_mask_irq, - .irq_unmask = sic_unmask_irq, +static struct fpga_irq_data sic_irq = { + .base = VA_SIC_BASE, + .irq_start = IRQ_SIC_START, + .chip.name = "SIC", }; -static void -sic_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS); - - if (status == 0) { - do_bad_IRQ(irq, desc); - return; - } - - do { - irq = ffs(status) - 1; - status &= ~(1 << irq); - - irq += IRQ_SIC_START; - - generic_handle_irq(irq); - } while (status); -} - #if 1 #define IRQ_MMCI0A IRQ_VICSOURCE22 #define IRQ_AACI IRQ_VICSOURCE24 @@ -118,22 +85,11 @@ sic_handle_irq(unsigned int irq, struct irq_desc *desc) void __init versatile_init_irq(void) { - unsigned int i; - vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0); - set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq); - - /* Do second interrupt controller */ writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR); - for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) { - if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) { - set_irq_chip(i, &sic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - } + fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq); /* * Interrupts on secondary controller from 0 to 8 are routed to @@ -476,127 +432,7 @@ static struct clk_lookup lookups[] = { #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) #define SYS_CLCD_ID_VGA (0x1f << 8) -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_3_8_in = { - .mode = { - .name = "Sanyo QVGA", - .refresh = 116, - .xres = 320, - .yres = 240, - .pixclock = 100000, - .left_margin = 6, - .right_margin = 6, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 6, - .vsync_len = 6, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_2_5_in = { - .mode = { - .name = "Sanyo QVGA Portrait", - .refresh = 116, - .xres = 240, - .yres = 320, - .pixclock = 100000, - .left_margin = 20, - .right_margin = 10, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 10, - .vsync_len = 2, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel epson_2_2_in = { - .mode = { - .name = "Epson QCIF", - .refresh = 390, - .xres = 176, - .yres = 220, - .pixclock = 62500, - .left_margin = 3, - .right_margin = 2, - .upper_margin = 1, - .lower_margin = 0, - .hsync_len = 3, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static struct clcd_panel *versatile_clcd_panel(void) -{ - void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; - struct clcd_panel *panel = &vga; - u32 val; - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel = &sanyo_3_8_in; - else if (val == SYS_CLCD_ID_SANYO_2_5) - panel = &sanyo_2_5_in; - else if (val == SYS_CLCD_ID_EPSON_2_2) - panel = &epson_2_2_in; - else if (val == SYS_CLCD_ID_VGA) - panel = &vga; - else { - printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", - val); - panel = &vga; - } - - return panel; -} +static bool is_sanyo_2_5_lcd; /* * Disable all display connectors on the interface module. @@ -614,7 +450,7 @@ static void versatile_clcd_disable(struct clcd_fb *fb) /* * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off */ - if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) { + if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) { void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); unsigned long ctrl; @@ -630,18 +466,22 @@ static void versatile_clcd_disable(struct clcd_fb *fb) */ static void versatile_clcd_enable(struct clcd_fb *fb) { + struct fb_var_screeninfo *var = &fb->fb.var; void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; u32 val; val = readl(sys_clcd); val &= ~SYS_CLCD_MODE_MASK; - switch (fb->fb.var.green.length) { + switch (var->green.length) { case 5: val |= SYS_CLCD_MODE_5551; break; case 6: - val |= SYS_CLCD_MODE_565_RLSB; + if (var->red.offset == 0) + val |= SYS_CLCD_MODE_565_RLSB; + else + val |= SYS_CLCD_MODE_565_BLSB; break; case 8: val |= SYS_CLCD_MODE_888; @@ -663,7 +503,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb) /* * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on */ - if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) { + if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) { void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); unsigned long ctrl; @@ -674,50 +514,62 @@ static void versatile_clcd_enable(struct clcd_fb *fb) #endif } -static unsigned long framesize = SZ_1M; - +/* + * Detect which LCD panel is connected, and return the appropriate + * clcd_panel structure. Note: we do not have any information on + * the required timings for the 8.4in panel, so we presently assume + * VGA timings. + */ static int versatile_clcd_setup(struct clcd_fb *fb) { - dma_addr_t dma; + void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; + const char *panel_name; + u32 val; - fb->panel = versatile_clcd_panel(); + is_sanyo_2_5_lcd = false; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; + if (val == SYS_CLCD_ID_SANYO_3_8) + panel_name = "Sanyo TM38QV67A02A"; + else if (val == SYS_CLCD_ID_SANYO_2_5) { + panel_name = "Sanyo QVGA Portrait"; + is_sanyo_2_5_lcd = true; + } else if (val == SYS_CLCD_ID_EPSON_2_2) + panel_name = "Epson L2F50113T00"; + else if (val == SYS_CLCD_ID_VGA) + panel_name = "VGA"; + else { + printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", + val); + panel_name = "VGA"; } - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; + fb->panel = versatile_clcd_get_panel(panel_name); + if (!fb->panel) + return -EINVAL; - return 0; + return versatile_clcd_setup_dma(fb, SZ_1M); } -static int versatile_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) { - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} + clcdfb_decode(fb, regs); -static void versatile_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + /* Always clear BGR for RGB565: we do the routing externally */ + if (fb->fb.var.green.length == 6) + regs->cntl &= ~CNTL_BGR; } static struct clcd_board clcd_plat_data = { .name = "Versatile", + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, .check = clcdfb_check, - .decode = clcdfb_decode, + .decode = versatile_clcd_decode, .disable = versatile_clcd_disable, .enable = versatile_clcd_enable, .setup = versatile_clcd_setup, - .mmap = versatile_clcd_mmap, - .remove = versatile_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; static struct pl061_platform_data gpio0_plat_data = { @@ -737,53 +589,35 @@ static struct pl022_ssp_controller ssp0_plat_data = { }; #define AACI_IRQ { IRQ_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } /* * These devices are connected directly to the multi-layer AHB switch */ #define SMC_IRQ { NO_IRQ, NO_IRQ } -#define SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } -#define CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } -#define DMAC_DMA { 0, 0 } /* * These devices are connected via the core APB bridge */ #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } -#define WATCHDOG_DMA { 0, 0 } #define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } -#define GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define RTC_IRQ { IRQ_RTCINT, NO_IRQ } -#define RTC_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge */ #define SCI_IRQ { IRQ_SCIINT, NO_IRQ } -#define SCI_DMA { 7, 6 } #define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } -#define UART0_DMA { 15, 14 } #define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } -#define UART1_DMA { 13, 12 } #define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } -#define UART2_DMA { 11, 10 } #define SSP_IRQ { IRQ_SSPINT, NO_IRQ } -#define SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); @@ -865,14 +699,21 @@ static void versatile_leds_event(led_event_t ledevt) } #endif /* CONFIG_LEDS */ -void __init versatile_init(void) +/* Early initializations */ +void __init versatile_init_early(void) { - int i; - - osc4_clk.vcoreg = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET; + void __iomem *sys = __io_address(VERSATILE_SYS_BASE); + osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET; clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000); +} + +void __init versatile_init(void) +{ + int i; + platform_device_register(&versatile_flash_device); platform_device_register(&versatile_i2c_device); platform_device_register(&smc91x_device); @@ -889,12 +730,6 @@ void __init versatile_init(void) } /* - * The sched_clock counter - */ -#define REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + \ - VERSATILE_SYS_24MHz_OFFSET) - -/* * Where is the timer (VA)? */ #define TIMER0_VA_BASE __io_address(VERSATILE_TIMER0_1_BASE) @@ -909,8 +744,6 @@ static void __init versatile_timer_init(void) { u32 val; - versatile_sched_clock_init(REFCOUNTER, 24000000); - /* * set clock frequency: * VERSATILE_REFCLK is 32KHz diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index 9d39886a8351..fd6404e5d788 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -25,6 +25,7 @@ #include <linux/amba/bus.h> extern void __init versatile_init(void); +extern void __init versatile_init_early(void); extern void __init versatile_init_irq(void); extern void __init versatile_map_io(void); extern struct sys_timer versatile_timer; @@ -44,7 +45,6 @@ static struct amba_device name##_device = { \ }, \ .dma_mask = ~0, \ .irq = base##_IRQ, \ - /* .dma = base##_DMA,*/ \ } #endif diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index b5e75bb44965..6911e1f5f156 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -39,6 +39,6 @@ /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) -#define __io_address(n) __io(IO_ADDRESS(n)) +#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) #endif diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index aa9730fb13bf..f8ae64b3eed0 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -37,6 +37,7 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, .map_io = versatile_map_io, + .init_early = versatile_init_early, .init_irq = versatile_init_irq, .timer = &versatile_timer, .init_machine = versatile_init, diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index bf469642a3f8..37c23dfeefb7 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -59,19 +59,14 @@ static struct pl061_platform_data gpio3_plat_data = { }; #define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ } -#define UART3_DMA { 0x86, 0x87 } #define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ } -#define SCI1_DMA { 0x88, 0x89 } #define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B } -#define MMCI1_DMA { 0x85, 0 } /* * These devices are connected via the core APB bridge */ #define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge @@ -110,6 +105,7 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, .map_io = versatile_map_io, + .init_early = versatile_init_early, .init_irq = versatile_init_irq, .timer = &versatile_timer, .init_machine = versatile_pb_init, diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 3f19b660a165..931148487f0b 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -5,5 +5,8 @@ config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" select CPU_V7 select ARM_GIC + select ARM_ERRATA_720789 + select ARM_ERRATA_751472 + select ARM_ERRATA_753970 endmenu diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 2c0ac7de2814..90551b9780ab 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -4,6 +4,5 @@ obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index 362780d868de..e0312a1dce3a 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -21,4 +21,5 @@ struct amba_device name##_device = { \ struct map_desc; void v2m_map_io(struct map_desc *tile, size_t num); +void v2m_init_early(void); extern struct sys_timer v2m_timer; diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index e9bccc5230c9..30d5a5b0ac21 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -30,6 +30,8 @@ #include <mach/motherboard.h> +#include <plat/clcd.h> + #define V2M_PA_CS7 0x10000000 static struct map_desc ct_ca9x4_io_desc[] __initdata = { @@ -80,29 +82,6 @@ static struct sys_timer ct_ca9x4_timer = { }; #endif -static struct clcd_panel xvga_panel = { - .mode = { - .name = "XVGA", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15384, - .left_margin = 168, - .right_margin = 8, - .upper_margin = 29, - .lower_margin = 3, - .hsync_len = 144, - .vsync_len = 6, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) { v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0); @@ -112,42 +91,23 @@ static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) { unsigned long framesize = 1024 * 768 * 2; - dma_addr_t dma; - - fb->panel = &xvga_panel; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map frame buffer\n"); - return -ENOMEM; - } - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; - - return 0; -} - -static int ct_ca9x4_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base, - fb->fb.fix.smem_start, fb->fb.fix.smem_len); -} + fb->panel = versatile_clcd_get_panel("XVGA"); + if (!fb->panel) + return -EINVAL; -static void ct_ca9x4_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, framesize); } static struct clcd_board ct_ca9x4_clcd_data = { .name = "CT-CA9X4", + .caps = CLCD_CAP_5551 | CLCD_CAP_565, .check = clcdfb_check, .decode = clcdfb_decode, .enable = ct_ca9x4_clcd_enable, .setup = ct_ca9x4_clcd_setup, - .mmap = ct_ca9x4_clcd_mmap, - .remove = ct_ca9x4_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); @@ -220,6 +180,13 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static void __init ct_ca9x4_init_early(void) +{ + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + v2m_init_early(); +} + static void __init ct_ca9x4_init(void) { int i; @@ -234,8 +201,6 @@ static void __init ct_ca9x4_init(void) l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); #endif - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); @@ -246,6 +211,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4") .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .map_io = ct_ca9x4_map_io, .init_irq = ct_ca9x4_init_irq, + .init_early = ct_ca9x4_init_early, #if 0 .timer = &ct_ca9x4_timer, #else diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 634bf1d3a311..18927023c2cc 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -10,13 +10,9 @@ */ #include <linux/init.h> #include <linux/errno.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <asm/cacheflush.h> #include <asm/smp_scu.h> #include <asm/unified.h> @@ -26,99 +22,13 @@ #include "core.h" -extern void vexpress_secondary_startup(void); - -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int __cpuinitdata pen_release = -1; - -/* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency - * or not. This is necessary for the hotplug code to work reliably. - */ -static void __cpuinit write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); - outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); -} +extern void versatile_secondary_startup(void); static void __iomem *scu_base_addr(void) { return MMIO_P2V(A9_MPCORE_SCU); } -static DEFINE_SPINLOCK(boot_lock); - -void __cpuinit platform_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * Set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * This is really belt and braces; we hold unintended secondary - * CPUs in the holding pen until we're ready for them. However, - * since we haven't sent them a soft interrupt, they shouldn't - * be there. - */ - write_pen_release(cpu); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - smp_cross_call(cpumask_of(cpu), 1); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. @@ -163,6 +73,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * secondary CPU branches to this address. */ writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); - writel(BSYM(virt_to_phys(vexpress_secondary_startup)), + writel(BSYM(virt_to_phys(versatile_secondary_startup)), MMIO_P2V(V2M_SYS_FLAGSSET)); } diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 1edae65a0e72..63ef663fb0be 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -7,6 +7,7 @@ #include <linux/io.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/ata_platform.h> #include <linux/smsc911x.h> #include <linux/spinlock.h> #include <linux/sysdev.h> @@ -48,13 +49,15 @@ void __init v2m_map_io(struct map_desc *tile, size_t num) iotable_init(tile, num); } +void __init v2m_init_early(void) +{ + versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); +} static void __init v2m_timer_init(void) { u32 scctrl; - versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); - /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL)); scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; @@ -249,6 +252,29 @@ static struct platform_device v2m_flash_device = { .dev.platform_data = &v2m_flash_data, }; +static struct pata_platform_info v2m_pata_data = { + .ioport_shift = 2, +}; + +static struct resource v2m_pata_resources[] = { + { + .start = V2M_CF, + .end = V2M_CF + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = V2M_CF + 0x100, + .end = V2M_CF + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device v2m_cf_device = { + .name = "pata_platform", + .id = -1, + .resource = v2m_pata_resources, + .num_resources = ARRAY_SIZE(v2m_pata_resources), + .dev.platform_data = &v2m_pata_data, +}; static unsigned int v2m_mmci_status(struct device *dev) { @@ -363,6 +389,7 @@ static int __init v2m_init(void) platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); + platform_device_register(&v2m_cf_device); platform_device_register(&v2m_eth_device); platform_device_register(&v2m_usb_device); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4771dba61448..82a093cee09a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -149,6 +149,7 @@ static int __init consistent_init(void) { int ret = 0; pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; int i = 0; @@ -156,7 +157,15 @@ static int __init consistent_init(void) do { pgd = pgd_offset(&init_mm, base); - pmd = pmd_alloc(&init_mm, pgd, base); + + pud = pud_alloc(&init_mm, pgd, base); + if (!pud) { + printk(KERN_ERR "%s: no pud tables\n", __func__); + ret = -ENOMEM; + break; + } + + pmd = pmd_alloc(&init_mm, pud, base); if (!pmd) { printk(KERN_ERR "%s: no pmd tables\n", __func__); ret = -ENOMEM; diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 01210dba0221..7cab79179421 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -95,6 +95,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address, { spinlock_t *ptl; pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; int ret; @@ -103,7 +104,11 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address, if (pgd_none_or_clear_bad(pgd)) return 0; - pmd = pmd_offset(pgd, address); + pud = pud_offset(pgd, address); + if (pud_none_or_clear_bad(pud)) + return 0; + + pmd = pmd_offset(pud, address); if (pmd_none_or_clear_bad(pmd)) return 0; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index f10f9bac2206..bc0e1d88fd3b 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -76,9 +76,11 @@ void show_pte(struct mm_struct *mm, unsigned long addr) printk(KERN_ALERT "pgd = %p\n", mm->pgd); pgd = pgd_offset(mm, addr); - printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd)); + printk(KERN_ALERT "[%08lx] *pgd=%08llx", + addr, (long long)pgd_val(*pgd)); do { + pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -90,9 +92,21 @@ void show_pte(struct mm_struct *mm, unsigned long addr) break; } - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + if (PTRS_PER_PUD != 1) + printk(", *pud=%08lx", pud_val(*pud)); + + if (pud_none(*pud)) + break; + + if (pud_bad(*pud)) { + printk("(bad)"); + break; + } + + pmd = pmd_offset(pud, addr); if (PTRS_PER_PMD != 1) - printk(", *pmd=%08lx", pmd_val(*pmd)); + printk(", *pmd=%08llx", (long long)pmd_val(*pmd)); if (pmd_none(*pmd)) break; @@ -107,8 +121,9 @@ void show_pte(struct mm_struct *mm, unsigned long addr) break; pte = pte_offset_map(pmd, addr); - printk(", *pte=%08lx", pte_val(*pte)); - printk(", *ppte=%08lx", pte_val(pte[PTE_HWTABLE_PTRS])); + printk(", *pte=%08llx", (long long)pte_val(*pte)); + printk(", *ppte=%08llx", + (long long)pte_val(pte[PTE_HWTABLE_PTRS])); pte_unmap(pte); } while(0); @@ -388,6 +403,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr, { unsigned int index; pgd_t *pgd, *pgd_k; + pud_t *pud, *pud_k; pmd_t *pmd, *pmd_k; if (addr < TASK_SIZE) @@ -406,12 +422,19 @@ do_translation_fault(unsigned long addr, unsigned int fsr, if (pgd_none(*pgd_k)) goto bad_area; - if (!pgd_present(*pgd)) set_pgd(pgd, *pgd_k); - pmd_k = pmd_offset(pgd_k, addr); - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + pud_k = pud_offset(pgd_k, addr); + + if (pud_none(*pud_k)) + goto bad_area; + if (!pud_present(*pud)) + set_pud(pud, *pud_k); + + pmd = pmd_offset(pud, addr); + pmd_k = pmd_offset(pud_k, addr); /* * On ARM one Linux PGD entry contains two hardware entries (see page diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 57299446f787..2be9139a4ef3 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -4,10 +4,10 @@ #include <asm/pgalloc.h> #include <asm/pgtable.h> -static void idmap_add_pmd(pgd_t *pgd, unsigned long addr, unsigned long end, +static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end, unsigned long prot) { - pmd_t *pmd = pmd_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); addr = (addr & PMD_MASK) | prot; pmd[0] = __pmd(addr); @@ -16,6 +16,18 @@ static void idmap_add_pmd(pgd_t *pgd, unsigned long addr, unsigned long end, flush_pmd_entry(pmd); } +static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end, + unsigned long prot) +{ + pud_t *pud = pud_offset(pgd, addr); + unsigned long next; + + do { + next = pud_addr_end(addr, end); + idmap_add_pmd(pud, addr, next, prot); + } while (pud++, addr = next, addr != end); +} + void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end) { unsigned long prot, next; @@ -27,17 +39,28 @@ void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end) pgd += pgd_index(addr); do { next = pgd_addr_end(addr, end); - idmap_add_pmd(pgd, addr, next, prot); + idmap_add_pud(pgd, addr, next, prot); } while (pgd++, addr = next, addr != end); } #ifdef CONFIG_SMP -static void idmap_del_pmd(pgd_t *pgd, unsigned long addr, unsigned long end) +static void idmap_del_pmd(pud_t *pud, unsigned long addr, unsigned long end) { - pmd_t *pmd = pmd_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); pmd_clear(pmd); } +static void idmap_del_pud(pgd_t *pgd, unsigned long addr, unsigned long end) +{ + pud_t *pud = pud_offset(pgd, addr); + unsigned long next; + + do { + next = pud_addr_end(addr, end); + idmap_del_pmd(pud, addr, next); + } while (pud++, addr = next, addr != end); +} + void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end) { unsigned long next; @@ -45,7 +68,7 @@ void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end) pgd += pgd_index(addr); do { next = pgd_addr_end(addr, end); - idmap_del_pmd(pgd, addr, next); + idmap_del_pud(pgd, addr, next); } while (pgd++, addr = next, addr != end); } #endif diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index cddd684364da..b3b0f0f5053d 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -350,7 +350,7 @@ void __init bootmem_init(void) */ arm_bootmem_free(min, max_low, max_high); - high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1; + high_memory = __va(((phys_addr_t)max_low << PAGE_SHIFT) - 1) + 1; /* * This doesn't seem to be used by the Linux memory manager any @@ -398,8 +398,8 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn) * Convert to physical addresses, and * round start upwards and end downwards. */ - pg = PAGE_ALIGN(__pa(start_pg)); - pgend = __pa(end_pg) & PAGE_MASK; + pg = (unsigned long)PAGE_ALIGN(__pa(start_pg)); + pgend = (unsigned long)__pa(end_pg) & PAGE_MASK; /* * If there are free pages between these, diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 36960df5fb76..d2384106af9c 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -7,7 +7,7 @@ extern pmd_t *top_pmd; static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) { - return pmd_offset(pgd, virt); + return pmd_offset(pud_offset(pgd, virt), virt); } static inline pmd_t *pmd_off_k(unsigned long virt) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index ff7b43b5885a..6cf76b3b68d1 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -533,7 +533,7 @@ static void __init *early_alloc(unsigned long sz) static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot) { if (pmd_none(*pmd)) { - pte_t *pte = early_alloc(2 * PTRS_PER_PTE * sizeof(pte_t)); + pte_t *pte = early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE); __pmd_populate(pmd, __pa(pte), prot); } BUG_ON(pmd_bad(*pmd)); @@ -551,11 +551,11 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, } while (pte++, addr += PAGE_SIZE, addr != end); } -static void __init alloc_init_section(pgd_t *pgd, unsigned long addr, +static void __init alloc_init_section(pud_t *pud, unsigned long addr, unsigned long end, phys_addr_t phys, const struct mem_type *type) { - pmd_t *pmd = pmd_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); /* * Try a section mapping - end, addr and phys must all be aligned @@ -584,6 +584,19 @@ static void __init alloc_init_section(pgd_t *pgd, unsigned long addr, } } +static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end, + unsigned long phys, const struct mem_type *type) +{ + pud_t *pud = pud_offset(pgd, addr); + unsigned long next; + + do { + next = pud_addr_end(addr, end); + alloc_init_section(pud, addr, next, phys, type); + phys += next - addr; + } while (pud++, addr = next, addr != end); +} + static void __init create_36bit_mapping(struct map_desc *md, const struct mem_type *type) { @@ -592,13 +605,13 @@ static void __init create_36bit_mapping(struct map_desc *md, pgd_t *pgd; addr = md->virtual; - phys = (unsigned long)__pfn_to_phys(md->pfn); + phys = __pfn_to_phys(md->pfn); length = PAGE_ALIGN(md->length); if (!(cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())) { printk(KERN_ERR "MM: CPU does not support supersection " "mapping for 0x%08llx at 0x%08lx\n", - __pfn_to_phys((u64)md->pfn), addr); + (long long)__pfn_to_phys((u64)md->pfn), addr); return; } @@ -611,14 +624,14 @@ static void __init create_36bit_mapping(struct map_desc *md, if (type->domain) { printk(KERN_ERR "MM: invalid domain in supersection " "mapping for 0x%08llx at 0x%08lx\n", - __pfn_to_phys((u64)md->pfn), addr); + (long long)__pfn_to_phys((u64)md->pfn), addr); return; } if ((addr | length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) { - printk(KERN_ERR "MM: cannot create mapping for " - "0x%08llx at 0x%08lx invalid alignment\n", - __pfn_to_phys((u64)md->pfn), addr); + printk(KERN_ERR "MM: cannot create mapping for 0x%08llx" + " at 0x%08lx invalid alignment\n", + (long long)__pfn_to_phys((u64)md->pfn), addr); return; } @@ -631,7 +644,8 @@ static void __init create_36bit_mapping(struct map_desc *md, pgd = pgd_offset_k(addr); end = addr + length; do { - pmd_t *pmd = pmd_offset(pgd, addr); + pud_t *pud = pud_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); int i; for (i = 0; i < 16; i++) @@ -652,22 +666,23 @@ static void __init create_36bit_mapping(struct map_desc *md, */ static void __init create_mapping(struct map_desc *md) { - unsigned long phys, addr, length, end; + unsigned long addr, length, end; + phys_addr_t phys; const struct mem_type *type; pgd_t *pgd; if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { - printk(KERN_WARNING "BUG: not creating mapping for " - "0x%08llx at 0x%08lx in user region\n", - __pfn_to_phys((u64)md->pfn), md->virtual); + printk(KERN_WARNING "BUG: not creating mapping for 0x%08llx" + " at 0x%08lx in user region\n", + (long long)__pfn_to_phys((u64)md->pfn), md->virtual); return; } if ((md->type == MT_DEVICE || md->type == MT_ROM) && md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { - printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " - "overlaps vmalloc space\n", - __pfn_to_phys((u64)md->pfn), md->virtual); + printk(KERN_WARNING "BUG: mapping for 0x%08llx" + " at 0x%08lx overlaps vmalloc space\n", + (long long)__pfn_to_phys((u64)md->pfn), md->virtual); } type = &mem_types[md->type]; @@ -681,13 +696,13 @@ static void __init create_mapping(struct map_desc *md) } addr = md->virtual & PAGE_MASK; - phys = (unsigned long)__pfn_to_phys(md->pfn); + phys = __pfn_to_phys(md->pfn); length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK)); if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) { - printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not " + printk(KERN_WARNING "BUG: map for 0x%08llx at 0x%08lx can not " "be mapped using pages, ignoring.\n", - __pfn_to_phys(md->pfn), addr); + (long long)__pfn_to_phys(md->pfn), addr); return; } @@ -696,7 +711,7 @@ static void __init create_mapping(struct map_desc *md) do { unsigned long next = pgd_addr_end(addr, end); - alloc_init_section(pgd, addr, next, phys, type); + alloc_init_pud(pgd, addr, next, phys, type); phys += next - addr; addr = next; @@ -794,9 +809,10 @@ static void __init sanity_check_meminfo(void) */ if (__va(bank->start) >= vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) { - printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx " + printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx " "(vmalloc region overlap).\n", - bank->start, bank->start + bank->size - 1); + (unsigned long long)bank->start, + (unsigned long long)bank->start + bank->size - 1); continue; } @@ -807,10 +823,11 @@ static void __init sanity_check_meminfo(void) if (__va(bank->start + bank->size) > vmalloc_min || __va(bank->start + bank->size) < __va(bank->start)) { unsigned long newsize = vmalloc_min - __va(bank->start); - printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx " - "to -%.8lx (vmalloc region overlap).\n", - bank->start, bank->start + bank->size - 1, - bank->start + newsize - 1); + printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " + "to -%.8llx (vmalloc region overlap).\n", + (unsigned long long)bank->start, + (unsigned long long)bank->start + bank->size - 1, + (unsigned long long)bank->start + newsize - 1); bank->size = newsize; } #endif diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 709244c66fa3..b2027c154b2a 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -23,6 +23,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm) { pgd_t *new_pgd, *init_pgd; + pud_t *new_pud, *init_pud; pmd_t *new_pmd, *init_pmd; pte_t *new_pte, *init_pte; @@ -46,7 +47,11 @@ pgd_t *pgd_alloc(struct mm_struct *mm) * On ARM, first page must always be allocated since it * contains the machine vectors. */ - new_pmd = pmd_alloc(mm, new_pgd, 0); + new_pud = pud_alloc(mm, new_pgd, 0); + if (!new_pud) + goto no_pud; + + new_pmd = pmd_alloc(mm, new_pud, 0); if (!new_pmd) goto no_pmd; @@ -54,7 +59,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm) if (!new_pte) goto no_pte; - init_pmd = pmd_offset(init_pgd, 0); + init_pud = pud_offset(init_pgd, 0); + init_pmd = pmd_offset(init_pud, 0); init_pte = pte_offset_map(init_pmd, 0); set_pte_ext(new_pte, *init_pte, 0); pte_unmap(init_pte); @@ -66,6 +72,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm) no_pte: pmd_free(mm, new_pmd); no_pmd: + pud_free(mm, new_pud); +no_pud: free_pages((unsigned long)new_pgd, 2); no_pgd: return NULL; @@ -74,6 +82,7 @@ no_pgd: void pgd_free(struct mm_struct *mm, pgd_t *pgd_base) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pgtable_t pte; @@ -84,7 +93,11 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd_base) if (pgd_none_or_clear_bad(pgd)) goto no_pgd; - pmd = pmd_offset(pgd, 0); + pud = pud_offset(pgd, 0); + if (pud_none_or_clear_bad(pud)) + goto no_pud; + + pmd = pmd_offset(pud, 0); if (pmd_none_or_clear_bad(pmd)) goto no_pmd; @@ -92,8 +105,11 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd_base) pmd_clear(pmd); pte_free(mm, pte); no_pmd: - pgd_clear(pgd); + pud_clear(pud); pmd_free(mm, pmd); +no_pud: + pgd_clear(pgd); + pud_free(mm, pud); no_pgd: free_pages((unsigned long) pgd_base, 2); } diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig new file mode 100644 index 000000000000..52353beb369d --- /dev/null +++ b/arch/arm/plat-versatile/Kconfig @@ -0,0 +1,17 @@ +if PLAT_VERSATILE + +config PLAT_VERSATILE_CLCD + bool + +config PLAT_VERSATILE_FPGA_IRQ + bool + +config PLAT_VERSATILE_LEDS + def_bool y if LEDS_CLASS + depends on ARCH_REALVIEW || ARCH_VERSATILE + +config PLAT_VERSATILE_SCHED_CLOCK + def_bool y if !ARCH_INTEGRATOR_AP + select HAVE_SCHED_CLOCK + +endif diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 16dde0819934..69714db47c33 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,8 +1,7 @@ obj-y := clock.o -ifneq ($(CONFIG_ARCH_INTEGRATOR),y) -obj-y += sched-clock.o -endif -ifeq ($(CONFIG_LEDS_CLASS),y) -obj-$(CONFIG_ARCH_REALVIEW) += leds.o -obj-$(CONFIG_ARCH_VERSATILE) += leds.o -endif +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o +obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o +obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o +obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o +obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/clcd.c b/arch/arm/plat-versatile/clcd.c new file mode 100644 index 000000000000..6628cc27efc5 --- /dev/null +++ b/arch/arm/plat-versatile/clcd.c @@ -0,0 +1,182 @@ +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> +#include <plat/clcd.h> + +static struct clcd_panel vga = { + .mode = { + .name = "VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 40, + .right_margin = 24, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, + .bpp = 16, +}; + +static struct clcd_panel xvga = { + .mode = { + .name = "XVGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15748, + .left_margin = 152, + .right_margin = 48, + .upper_margin = 23, + .lower_margin = 3, + .hsync_len = 104, + .vsync_len = 4, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, + .bpp = 16, +}; + +/* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */ +static struct clcd_panel sanyo_tm38qv67a02a = { + .mode = { + .name = "Sanyo TM38QV67A02A", + .refresh = 116, + .xres = 320, + .yres = 240, + .pixclock = 100000, + .left_margin = 6, + .right_margin = 6, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 6, + .vsync_len = 6, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +static struct clcd_panel sanyo_2_5_in = { + .mode = { + .name = "Sanyo QVGA Portrait", + .refresh = 116, + .xres = 240, + .yres = 320, + .pixclock = 100000, + .left_margin = 20, + .right_margin = 10, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 10, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +/* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */ +static struct clcd_panel epson_l2f50113t00 = { + .mode = { + .name = "Epson L2F50113T00", + .refresh = 390, + .xres = 176, + .yres = 220, + .pixclock = 62500, + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 0, + .hsync_len = 3, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +static struct clcd_panel *panels[] = { + &vga, + &xvga, + &sanyo_tm38qv67a02a, + &sanyo_2_5_in, + &epson_l2f50113t00, +}; + +struct clcd_panel *versatile_clcd_get_panel(const char *name) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(panels); i++) + if (strcmp(panels[i]->mode.name, name) == 0) + break; + + if (i < ARRAY_SIZE(panels)) + return panels[i]; + + pr_err("CLCD: couldn't get parameters for panel %s\n", name); + + return NULL; +} + +int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) +{ + dma_addr_t dma; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + pr_err("CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +void versatile_clcd_remove_dma(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c new file mode 100644 index 000000000000..31d945d37e4f --- /dev/null +++ b/arch/arm/plat-versatile/fpga-irq.c @@ -0,0 +1,72 @@ +/* + * Support for Versatile FPGA-based IRQ controllers + */ +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/mach/irq.h> +#include <plat/fpga-irq.h> + +#define IRQ_STATUS 0x00 +#define IRQ_RAW_STATUS 0x04 +#define IRQ_ENABLE_SET 0x08 +#define IRQ_ENABLE_CLEAR 0x0c + +static void fpga_irq_mask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << (d->irq - f->irq_start); + + writel(mask, f->base + IRQ_ENABLE_CLEAR); +} + +static void fpga_irq_unmask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << (d->irq - f->irq_start); + + writel(mask, f->base + IRQ_ENABLE_SET); +} + +static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc) +{ + struct fpga_irq_data *f = get_irq_desc_data(desc); + u32 status = readl(f->base + IRQ_STATUS); + + if (status == 0) { + do_bad_IRQ(irq, desc); + return; + } + + do { + irq = ffs(status) - 1; + status &= ~(1 << irq); + + generic_handle_irq(irq + f->irq_start); + } while (status); +} + +void __init fpga_irq_init(int parent_irq, u32 valid, struct fpga_irq_data *f) +{ + unsigned int i; + + f->chip.irq_ack = fpga_irq_mask; + f->chip.irq_mask = fpga_irq_mask; + f->chip.irq_unmask = fpga_irq_unmask; + + if (parent_irq != -1) { + set_irq_data(parent_irq, f); + set_irq_chained_handler(parent_irq, fpga_irq_handle); + } + + for (i = 0; i < 32; i++) { + if (valid & (1 << i)) { + unsigned int irq = f->irq_start + i; + + set_irq_chip_data(irq, f); + set_irq_chip(irq, &f->chip); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + } +} diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/plat-versatile/headsmp.S index 7a3f0632947c..d397a1fb2f54 100644 --- a/arch/arm/mach-vexpress/headsmp.S +++ b/arch/arm/plat-versatile/headsmp.S @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-vexpress/headsmp.S + * linux/arch/arm/plat-versatile/headsmp.S * * Copyright (c) 2003 ARM Limited * All Rights Reserved @@ -14,11 +14,11 @@ __INIT /* - * Versatile Express specific entry point for secondary CPUs. This - * provides a "holding pen" into which all secondary cores are held + * Realview/Versatile Express specific entry point for secondary CPUs. + * This provides a "holding pen" into which all secondary cores are held * until we're ready for them to initialise. */ -ENTRY(vexpress_secondary_startup) +ENTRY(versatile_secondary_startup) mrc p15, 0, r0, c0, c0, 5 and r0, r0, #15 adr r4, 1f diff --git a/arch/arm/plat-versatile/include/plat/clcd.h b/arch/arm/plat-versatile/include/plat/clcd.h new file mode 100644 index 000000000000..6bb6a1d2019b --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/clcd.h @@ -0,0 +1,9 @@ +#ifndef PLAT_CLCD_H +#define PLAT_CLCD_H + +struct clcd_panel *versatile_clcd_get_panel(const char *); +int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); +int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); +void versatile_clcd_remove_dma(struct clcd_fb *); + +#endif diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h new file mode 100644 index 000000000000..627fafd1e595 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/fpga-irq.h @@ -0,0 +1,12 @@ +#ifndef PLAT_FPGA_IRQ_H +#define PLAT_FPGA_IRQ_H + +struct fpga_irq_data { + void __iomem *base; + unsigned int irq_start; + struct irq_chip chip; +}; + +void fpga_irq_init(int, u32, struct fpga_irq_data *); + +#endif diff --git a/arch/arm/mach-vexpress/localtimer.c b/arch/arm/plat-versatile/localtimer.c index c0e3a59a0bfc..0fb3961999b5 100644 --- a/arch/arm/mach-vexpress/localtimer.c +++ b/arch/arm/plat-versatile/localtimer.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-vexpress/localtimer.c + * linux/arch/arm/plat-versatile/localtimer.c * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved @@ -19,8 +19,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c new file mode 100644 index 000000000000..ba3d471d4bcf --- /dev/null +++ b/arch/arm/plat-versatile/platsmp.c @@ -0,0 +1,104 @@ +/* + * linux/arch/arm/plat-versatile/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +/* + * Write pen_release in a way that is guaranteed to be visible to all + * observers, irrespective of whether they're taking part in coherency + * or not. This is necessary for the hotplug code to work reliably. + */ +static void __cpuinit write_pen_release(int val) +{ + pen_release = val; + smp_wmb(); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_secondary_init(0); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + write_pen_release(-1); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * This is really belt and braces; we hold unintended secondary + * CPUs in the holding pen until we're ready for them. However, + * since we haven't sent them a soft interrupt, they shouldn't + * be there. + */ + write_pen_release(cpu); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + smp_cross_call(cpumask_of(cpu), 1); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 013c8ce57205..5fc983c5b92c 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -120,8 +120,23 @@ static void clcdfb_enable(struct clcd_fb *fb, u32 cntl) static int clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var) { + u32 caps; int ret = 0; + if (fb->panel->caps && fb->board->caps) + caps = fb->panel->caps & fb->board->caps; + else { + /* Old way of specifying what can be used */ + caps = fb->panel->cntl & CNTL_BGR ? + CLCD_CAP_BGR : CLCD_CAP_RGB; + /* But mask out 444 modes as they weren't supported */ + caps &= ~CLCD_CAP_444; + } + + /* Only TFT panels can do RGB888/BGR888 */ + if (!(fb->panel->cntl & CNTL_LCDTFT)) + caps &= ~CLCD_CAP_888; + memset(&var->transp, 0, sizeof(var->transp)); var->red.msb_right = 0; @@ -133,6 +148,13 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var) case 2: case 4: case 8: + /* If we can't do 5551, reject */ + caps &= CLCD_CAP_5551; + if (!caps) { + ret = -EINVAL; + break; + } + var->red.length = var->bits_per_pixel; var->red.offset = 0; var->green.length = var->bits_per_pixel; @@ -140,23 +162,61 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var) var->blue.length = var->bits_per_pixel; var->blue.offset = 0; break; + case 16: - var->red.length = 5; - var->blue.length = 5; + /* If we can't do 444, 5551 or 565, reject */ + if (!(caps & (CLCD_CAP_444 | CLCD_CAP_5551 | CLCD_CAP_565))) { + ret = -EINVAL; + break; + } + /* - * Green length can be 5 or 6 depending whether - * we're operating in RGB555 or RGB565 mode. + * Green length can be 4, 5 or 6 depending whether + * we're operating in 444, 5551 or 565 mode. */ - if (var->green.length != 5 && var->green.length != 6) - var->green.length = 6; + if (var->green.length == 4 && caps & CLCD_CAP_444) + caps &= CLCD_CAP_444; + if (var->green.length == 5 && caps & CLCD_CAP_5551) + caps &= CLCD_CAP_5551; + else if (var->green.length == 6 && caps & CLCD_CAP_565) + caps &= CLCD_CAP_565; + else { + /* + * PL110 officially only supports RGB555, + * but may be wired up to allow RGB565. + */ + if (caps & CLCD_CAP_565) { + var->green.length = 6; + caps &= CLCD_CAP_565; + } else if (caps & CLCD_CAP_5551) { + var->green.length = 5; + caps &= CLCD_CAP_5551; + } else { + var->green.length = 4; + caps &= CLCD_CAP_444; + } + } + + if (var->green.length >= 5) { + var->red.length = 5; + var->blue.length = 5; + } else { + var->red.length = 4; + var->blue.length = 4; + } break; case 32: - if (fb->panel->cntl & CNTL_LCDTFT) { - var->red.length = 8; - var->green.length = 8; - var->blue.length = 8; + /* If we can't do 888, reject */ + caps &= CLCD_CAP_888; + if (!caps) { + ret = -EINVAL; break; } + + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + break; default: ret = -EINVAL; break; @@ -168,7 +228,20 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var) * the bitfield length defined above. */ if (ret == 0 && var->bits_per_pixel >= 16) { - if (fb->panel->cntl & CNTL_BGR) { + bool bgr, rgb; + + bgr = caps & CLCD_CAP_BGR && var->blue.offset == 0; + rgb = caps & CLCD_CAP_RGB && var->red.offset == 0; + + if (!bgr && !rgb) + /* + * The requested format was not possible, try just + * our capabilities. One of BGR or RGB must be + * supported. + */ + bgr = caps & CLCD_CAP_BGR; + + if (bgr) { var->blue.offset = 0; var->green.offset = var->blue.offset + var->blue.length; var->red.offset = var->green.offset + var->green.length; @@ -443,8 +516,8 @@ static int clcdfb_register(struct clcd_fb *fb) fb_set_var(&fb->fb, &fb->fb.var); - printk(KERN_INFO "CLCD: %s hardware, %s display\n", - fb->board->name, fb->panel->mode.name); + dev_info(&fb->dev->dev, "%s hardware, %s display\n", + fb->board->name, fb->panel->mode.name); ret = register_framebuffer(&fb->fb); if (ret == 0) @@ -486,6 +559,10 @@ static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id) fb->dev = dev; fb->board = board; + dev_info(&fb->dev->dev, "PL%03x rev%u at 0x%08llx\n", + amba_part(dev), amba_rev(dev), + (unsigned long long)dev->res.start); + ret = fb->board->setup(fb); if (ret) goto free_fb; diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h index be33b3affc8a..24d26efd1432 100644 --- a/include/linux/amba/clcd.h +++ b/include/linux/amba/clcd.h @@ -53,6 +53,7 @@ #define CNTL_LCDBPP8 (3 << 1) #define CNTL_LCDBPP16 (4 << 1) #define CNTL_LCDBPP16_565 (6 << 1) +#define CNTL_LCDBPP16_444 (7 << 1) #define CNTL_LCDBPP24 (5 << 1) #define CNTL_LCDBW (1 << 4) #define CNTL_LCDTFT (1 << 5) @@ -66,6 +67,32 @@ #define CNTL_LDMAFIFOTIME (1 << 15) #define CNTL_WATERMARK (1 << 16) +enum { + /* individual formats */ + CLCD_CAP_RGB444 = (1 << 0), + CLCD_CAP_RGB5551 = (1 << 1), + CLCD_CAP_RGB565 = (1 << 2), + CLCD_CAP_RGB888 = (1 << 3), + CLCD_CAP_BGR444 = (1 << 4), + CLCD_CAP_BGR5551 = (1 << 5), + CLCD_CAP_BGR565 = (1 << 6), + CLCD_CAP_BGR888 = (1 << 7), + + /* connection layouts */ + CLCD_CAP_444 = CLCD_CAP_RGB444 | CLCD_CAP_BGR444, + CLCD_CAP_5551 = CLCD_CAP_RGB5551 | CLCD_CAP_BGR5551, + CLCD_CAP_565 = CLCD_CAP_RGB565 | CLCD_CAP_BGR565, + CLCD_CAP_888 = CLCD_CAP_RGB888 | CLCD_CAP_BGR888, + + /* red/blue ordering */ + CLCD_CAP_RGB = CLCD_CAP_RGB444 | CLCD_CAP_RGB5551 | + CLCD_CAP_RGB565 | CLCD_CAP_RGB888, + CLCD_CAP_BGR = CLCD_CAP_BGR444 | CLCD_CAP_BGR5551 | + CLCD_CAP_BGR565 | CLCD_CAP_BGR888, + + CLCD_CAP_ALL = CLCD_CAP_BGR | CLCD_CAP_RGB, +}; + struct clcd_panel { struct fb_videomode mode; signed short width; /* width in mm */ @@ -73,6 +100,7 @@ struct clcd_panel { u32 tim2; u32 tim3; u32 cntl; + u32 caps; unsigned int bpp:8, fixedtimings:1, grayscale:1; @@ -97,6 +125,11 @@ struct clcd_board { const char *name; /* + * Optional. Hardware capability flags. + */ + u32 caps; + + /* * Optional. Check whether the var structure is acceptable * for this display. */ @@ -155,34 +188,35 @@ struct clcd_fb { static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) { + struct fb_var_screeninfo *var = &fb->fb.var; u32 val, cpl; /* * Program the CLCD controller registers and start the CLCD */ - val = ((fb->fb.var.xres / 16) - 1) << 2; - val |= (fb->fb.var.hsync_len - 1) << 8; - val |= (fb->fb.var.right_margin - 1) << 16; - val |= (fb->fb.var.left_margin - 1) << 24; + val = ((var->xres / 16) - 1) << 2; + val |= (var->hsync_len - 1) << 8; + val |= (var->right_margin - 1) << 16; + val |= (var->left_margin - 1) << 24; regs->tim0 = val; - val = fb->fb.var.yres; + val = var->yres; if (fb->panel->cntl & CNTL_LCDDUAL) val /= 2; val -= 1; - val |= (fb->fb.var.vsync_len - 1) << 10; - val |= fb->fb.var.lower_margin << 16; - val |= fb->fb.var.upper_margin << 24; + val |= (var->vsync_len - 1) << 10; + val |= var->lower_margin << 16; + val |= var->upper_margin << 24; regs->tim1 = val; val = fb->panel->tim2; - val |= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS; - val |= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS; + val |= var->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS; + val |= var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS; - cpl = fb->fb.var.xres_virtual; + cpl = var->xres_virtual; if (fb->panel->cntl & CNTL_LCDTFT) /* TFT */ /* / 1 */; - else if (!fb->fb.var.grayscale) /* STN color */ + else if (!var->grayscale) /* STN color */ cpl = cpl * 8 / 3; else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */ cpl /= 8; @@ -194,10 +228,22 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) regs->tim3 = fb->panel->tim3; val = fb->panel->cntl; - if (fb->fb.var.grayscale) + if (var->grayscale) val |= CNTL_LCDBW; - switch (fb->fb.var.bits_per_pixel) { + if (fb->panel->caps && fb->board->caps && + var->bits_per_pixel >= 16) { + /* + * if board and panel supply capabilities, we can support + * changing BGR/RGB depending on supplied parameters + */ + if (var->red.offset == 0) + val &= ~CNTL_BGR; + else + val |= CNTL_BGR; + } + + switch (var->bits_per_pixel) { case 1: val |= CNTL_LCDBPP1; break; @@ -212,15 +258,17 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) break; case 16: /* - * PL110 cannot choose between 5551 and 565 modes in - * its control register + * PL110 cannot choose between 5551 and 565 modes in its + * control register. It is possible to use 565 with + * custom external wiring. */ - if ((fb->dev->periphid & 0x000fffff) == 0x00041110) + if (amba_part(fb->dev) == 0x110 || + var->green.length == 5) val |= CNTL_LCDBPP16; - else if (fb->fb.var.green.length == 5) - val |= CNTL_LCDBPP16; - else + else if (var->green.length == 6) val |= CNTL_LCDBPP16_565; + else + val |= CNTL_LCDBPP16_444; break; case 32: val |= CNTL_LCDBPP24; @@ -228,7 +276,7 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) } regs->cntl = val; - regs->pixclock = fb->fb.var.pixclock; + regs->pixclock = var->pixclock; } static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var) |