diff options
-rw-r--r-- | drivers/gpu/drm/gma500/mdfld_device.c | 20 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/mdfld_dsi_dpi.c | 2 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/mdfld_dsi_output.c | 51 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/mdfld_dsi_output.h | 2 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/mdfld_output.h | 2 | ||||
-rw-r--r-- | drivers/gpu/drm/gma500/psb_intel_drv.h | 1 |
6 files changed, 49 insertions, 29 deletions
diff --git a/drivers/gpu/drm/gma500/mdfld_device.c b/drivers/gpu/drm/gma500/mdfld_device.c index b718efccdcf2..be9cf6b1e3b3 100644 --- a/drivers/gpu/drm/gma500/mdfld_device.c +++ b/drivers/gpu/drm/gma500/mdfld_device.c @@ -6,6 +6,7 @@ **************************************************************************/ #include <linux/delay.h> +#include <linux/gpio/machine.h> #include <asm/intel_scu_ipc.h> @@ -505,12 +506,31 @@ static const struct psb_offset mdfld_regmap[3] = { }, }; +/* + * The GPIO lines for resetting DSI pipe 0 and 2 are available in the + * PCI device 0000:00:0c.0 on the Medfield. + */ +static struct gpiod_lookup_table mdfld_dsi_pipe_gpio_table = { + .table = { + GPIO_LOOKUP("0000:00:0c.0", 128, "dsi-pipe0-reset", + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("0000:00:0c.0", 34, "dsi-pipe2-reset", + GPIO_ACTIVE_HIGH), + { }, + }, +}; + static int mdfld_chip_setup(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; if (pci_enable_msi(dev->pdev)) dev_warn(dev->dev, "Enabling MSI failed!\n"); dev_priv->regmap = mdfld_regmap; + + /* Associate the GPIO lines with the DRM device */ + mdfld_dsi_pipe_gpio_table.dev_id = dev_name(dev->dev); + gpiod_add_lookup_table(&mdfld_dsi_pipe_gpio_table); + return mid_chip_setup(dev); } diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_dpi.c b/drivers/gpu/drm/gma500/mdfld_dsi_dpi.c index c976a9dd9240..ae1223f631a7 100644 --- a/drivers/gpu/drm/gma500/mdfld_dsi_dpi.c +++ b/drivers/gpu/drm/gma500/mdfld_dsi_dpi.c @@ -955,7 +955,7 @@ struct mdfld_dsi_encoder *mdfld_dsi_dpi_init(struct drm_device *dev, /* panel hard-reset */ if (p_funcs->reset) { - ret = p_funcs->reset(pipe); + ret = p_funcs->reset(dev, pipe); if (ret) { DRM_ERROR("Panel %d hard-reset failed\n", pipe); return NULL; diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.c b/drivers/gpu/drm/gma500/mdfld_dsi_output.c index 2f3486f32fed..4aab76613bd9 100644 --- a/drivers/gpu/drm/gma500/mdfld_dsi_output.c +++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.c @@ -28,6 +28,7 @@ #include <linux/delay.h> #include <linux/moduleparam.h> #include <linux/pm_runtime.h> +#include <linux/gpio/consumer.h> #include <asm/intel_scu_ipc.h> @@ -432,42 +433,42 @@ static int mdfld_dsi_get_default_config(struct drm_device *dev, return 0; } -int mdfld_dsi_panel_reset(int pipe) +int mdfld_dsi_panel_reset(struct drm_device *ddev, int pipe) { - unsigned gpio; - int ret = 0; - + struct device *dev = ddev->dev; + struct gpio_desc *gpiod; + + /* + * Raise the GPIO reset line for the corresponding pipe to HIGH, + * this is probably because it is active low so this takes the + * respective pipe out of reset. (We have no code to put it back + * into reset in this driver.) + */ switch (pipe) { case 0: - gpio = 128; + gpiod = gpiod_get(dev, "dsi-pipe0-reset", GPIOD_OUT_HIGH); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); break; case 2: - gpio = 34; + gpiod = gpiod_get(dev, "dsi-pipe2-reset", GPIOD_OUT_HIGH); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); break; default: - DRM_ERROR("Invalid output\n"); + DRM_DEV_ERROR(dev, "Invalid output pipe\n"); return -EINVAL; } + gpiod_put(gpiod); - ret = gpio_request(gpio, "gfx"); - if (ret) { - DRM_ERROR("gpio_rqueset failed\n"); - return ret; - } - - ret = gpio_direction_output(gpio, 1); - if (ret) { - DRM_ERROR("gpio_direction_output failed\n"); - goto gpio_error; - } + /* Flush posted writes on the device */ + gpiod = gpiod_get(dev, "dsi-pipe0-reset", GPIOD_ASIS); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + gpiod_get_value(gpiod); + gpiod_put(gpiod); - gpio_get_value(128); - -gpio_error: - if (gpio_is_valid(gpio)) - gpio_free(gpio); - - return ret; + return 0; } /* diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.h b/drivers/gpu/drm/gma500/mdfld_dsi_output.h index 0cccfe400a98..5c0db3c2903f 100644 --- a/drivers/gpu/drm/gma500/mdfld_dsi_output.h +++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.h @@ -372,6 +372,6 @@ extern void mdfld_dsi_controller_init(struct mdfld_dsi_config *dsi_config, extern int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config, u32 *mode, bool hs); -extern int mdfld_dsi_panel_reset(int pipe); +extern int mdfld_dsi_panel_reset(struct drm_device *dev, int pipe); #endif /*__MDFLD_DSI_OUTPUT_H__*/ diff --git a/drivers/gpu/drm/gma500/mdfld_output.h b/drivers/gpu/drm/gma500/mdfld_output.h index 17a944d70add..37a516cc56be 100644 --- a/drivers/gpu/drm/gma500/mdfld_output.h +++ b/drivers/gpu/drm/gma500/mdfld_output.h @@ -54,7 +54,7 @@ struct panel_funcs { const struct drm_encoder_helper_funcs *encoder_helper_funcs; struct drm_display_mode * (*get_config_mode)(struct drm_device *); int (*get_panel_info)(struct drm_device *, int, struct panel_info *); - int (*reset)(int pipe); + int (*reset)(struct drm_device *, int); void (*drv_ic_init)(struct mdfld_dsi_config *dsi_config, int pipe); }; diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h index 3dd5718c3e31..5340225d6997 100644 --- a/drivers/gpu/drm/gma500/psb_intel_drv.h +++ b/drivers/gpu/drm/gma500/psb_intel_drv.h @@ -13,7 +13,6 @@ #include <drm/drm_encoder.h> #include <drm/drm_probe_helper.h> #include <drm/drm_vblank.h> -#include <linux/gpio.h> #include "gma_display.h" /* |