summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/tty/serial/8250/8250_exar.c24
-rw-r--r--drivers/tty/serial/8250/8250_port.c9
-rw-r--r--drivers/tty/serial/Kconfig1
-rw-r--r--drivers/tty/serial/Makefile1
-rw-r--r--drivers/tty/serial/amba-pl011.c16
-rw-r--r--drivers/tty/serial/qcom_geni_serial.c11
-rw-r--r--drivers/tty/serial/samsung_tty.c8
-rw-r--r--drivers/tty/serial/stm32-usart.c2
-rw-r--r--drivers/tty/vt/vt.c5
-rw-r--r--drivers/tty/vt/vt_ioctl.c12
-rw-r--r--drivers/video/fbdev/core/fbcon.c25
11 files changed, 89 insertions, 25 deletions
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 04b9af7ed941..2d0e7c7e408d 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -744,6 +744,24 @@ static const struct exar8250_board pbn_exar_XR17V35x = {
.exit = pci_xr17v35x_exit,
};
+static const struct exar8250_board pbn_fastcom35x_2 = {
+ .num_ports = 2,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
+static const struct exar8250_board pbn_fastcom35x_4 = {
+ .num_ports = 4,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
+static const struct exar8250_board pbn_fastcom35x_8 = {
+ .num_ports = 8,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
static const struct exar8250_board pbn_exar_XR17V4358 = {
.num_ports = 12,
.setup = pci_xr17v35x_setup,
@@ -811,9 +829,9 @@ static const struct pci_device_id exar_pci_tbl[] = {
EXAR_DEVICE(EXAR, XR17V358, pbn_exar_XR17V35x),
EXAR_DEVICE(EXAR, XR17V4358, pbn_exar_XR17V4358),
EXAR_DEVICE(EXAR, XR17V8358, pbn_exar_XR17V8358),
- EXAR_DEVICE(COMMTECH, 4222PCIE, pbn_exar_XR17V35x),
- EXAR_DEVICE(COMMTECH, 4224PCIE, pbn_exar_XR17V35x),
- EXAR_DEVICE(COMMTECH, 4228PCIE, pbn_exar_XR17V35x),
+ EXAR_DEVICE(COMMTECH, 4222PCIE, pbn_fastcom35x_2),
+ EXAR_DEVICE(COMMTECH, 4224PCIE, pbn_fastcom35x_4),
+ EXAR_DEVICE(COMMTECH, 4228PCIE, pbn_fastcom35x_8),
EXAR_DEVICE(COMMTECH, 4222PCI335, pbn_fastcom335_2),
EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 06028da9bc6a..c71d647eb87a 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2275,6 +2275,10 @@ int serial8250_do_startup(struct uart_port *port)
if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) {
unsigned char iir1;
+
+ if (port->irqflags & IRQF_SHARED)
+ disable_irq_nosync(port->irq);
+
/*
* Test for UARTs that do not reassert THRE when the
* transmitter is idle and the interrupt has already
@@ -2284,8 +2288,6 @@ int serial8250_do_startup(struct uart_port *port)
* allow register changes to become visible.
*/
spin_lock_irqsave(&port->lock, flags);
- if (up->port.irqflags & IRQF_SHARED)
- disable_irq_nosync(port->irq);
wait_for_xmitr(up, UART_LSR_THRE);
serial_port_out_sync(port, UART_IER, UART_IER_THRI);
@@ -2297,9 +2299,10 @@ int serial8250_do_startup(struct uart_port *port)
iir = serial_port_in(port, UART_IIR);
serial_port_out(port, UART_IER, 0);
+ spin_unlock_irqrestore(&port->lock, flags);
+
if (port->irqflags & IRQF_SHARED)
enable_irq(port->irq);
- spin_unlock_irqrestore(&port->lock, flags);
/*
* If the interrupt is not reasserted, or we otherwise
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 8a0352eb337c..9409be982aa6 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -517,6 +517,7 @@ config SERIAL_IMX_CONSOLE
config SERIAL_IMX_EARLYCON
bool "Earlycon on IMX serial port"
+ depends on ARCH_MXC || COMPILE_TEST
depends on OF
select SERIAL_EARLYCON
help
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index d056ee6cca33..caf167f0c10a 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_SERIAL_ZS) += zs.o
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
obj-$(CONFIG_SERIAL_IMX) += imx.o
+obj-$(CONFIG_SERIAL_IMX_EARLYCON) += imx_earlycon.o
obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o
obj-$(CONFIG_SERIAL_ICOM) += icom.o
obj-$(CONFIG_SERIAL_MESON) += meson_uart.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c010f639298d..67498594d7d7 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2241,9 +2241,8 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
clk_disable(uap->clk);
}
-static void __init
-pl011_console_get_options(struct uart_amba_port *uap, int *baud,
- int *parity, int *bits)
+static void pl011_console_get_options(struct uart_amba_port *uap, int *baud,
+ int *parity, int *bits)
{
if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
@@ -2276,7 +2275,7 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
}
}
-static int __init pl011_console_setup(struct console *co, char *options)
+static int pl011_console_setup(struct console *co, char *options)
{
struct uart_amba_port *uap;
int baud = 38400;
@@ -2344,8 +2343,8 @@ static int __init pl011_console_setup(struct console *co, char *options)
*
* Returns 0 if console matches; otherwise non-zero to use default matching
*/
-static int __init pl011_console_match(struct console *co, char *name, int idx,
- char *options)
+static int pl011_console_match(struct console *co, char *name, int idx,
+ char *options)
{
unsigned char iotype;
resource_size_t addr;
@@ -2615,7 +2614,7 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
static int pl011_register_port(struct uart_amba_port *uap)
{
- int ret;
+ int ret, i;
/* Ensure interrupts from this UART are masked and cleared */
pl011_write(0, uap, REG_IMSC);
@@ -2626,6 +2625,9 @@ static int pl011_register_port(struct uart_amba_port *uap)
if (ret < 0) {
dev_err(uap->port.dev,
"Failed to register AMBA-PL011 driver\n");
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
+ if (amba_ports[i] == uap)
+ amba_ports[i] = NULL;
return ret;
}
}
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 3aa29d201f54..184b458820a3 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -361,11 +361,16 @@ static int qcom_geni_serial_get_char(struct uart_port *uport)
return NO_POLL_CHAR;
if (word_cnt == 1 && (status & RX_LAST))
+ /*
+ * NOTE: If RX_LAST_BYTE_VALID is 0 it needs to be
+ * treated as if it was BYTES_PER_FIFO_WORD.
+ */
private_data->poll_cached_bytes_cnt =
(status & RX_LAST_BYTE_VALID_MSK) >>
RX_LAST_BYTE_VALID_SHFT;
- else
- private_data->poll_cached_bytes_cnt = 4;
+
+ if (private_data->poll_cached_bytes_cnt == 0)
+ private_data->poll_cached_bytes_cnt = BYTES_PER_FIFO_WORD;
private_data->poll_cached_bytes =
readl(uport->membase + SE_GENI_RX_FIFOn);
@@ -1098,7 +1103,7 @@ static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport)
}
#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
-static int __init qcom_geni_console_setup(struct console *co, char *options)
+static int qcom_geni_console_setup(struct console *co, char *options)
{
struct uart_port *uport;
struct qcom_geni_serial_port *port;
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 8ed3482d2e1e..8ae3e03fbd8c 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -1905,9 +1905,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
ourport->tx_irq = ret + 1;
}
- ret = platform_get_irq(platdev, 1);
- if (ret > 0)
- ourport->tx_irq = ret;
+ if (!s3c24xx_serial_has_interrupt_mask(port)) {
+ ret = platform_get_irq(platdev, 1);
+ if (ret > 0)
+ ourport->tx_irq = ret;
+ }
/*
* DMA is currently supported only on DT platforms, if DMA properties
* are specified.
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 143300a80090..ba503dd04ce2 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -970,7 +970,7 @@ static int stm32_init_port(struct stm32_port *stm32port,
return ret;
if (stm32port->info->cfg.has_wakeup) {
- stm32port->wakeirq = platform_get_irq(pdev, 1);
+ stm32port->wakeirq = platform_get_irq_optional(pdev, 1);
if (stm32port->wakeirq <= 0 && stm32port->wakeirq != -ENXIO)
return stm32port->wakeirq ? : -ENODEV;
}
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index d8b9363b81c1..19cd4a4b1939 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1201,7 +1201,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
unsigned int old_rows, old_row_size, first_copied_row;
unsigned int new_cols, new_rows, new_row_size, new_screen_size;
unsigned int user;
- unsigned short *newscreen;
+ unsigned short *oldscreen, *newscreen;
struct uni_screen *new_uniscr = NULL;
WARN_CONSOLE_UNLOCKED();
@@ -1299,10 +1299,11 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
if (new_scr_end > new_origin)
scr_memsetw((void *)new_origin, vc->vc_video_erase_char,
new_scr_end - new_origin);
- kfree(vc->vc_screenbuf);
+ oldscreen = vc->vc_screenbuf;
vc->vc_screenbuf = newscreen;
vc->vc_screenbuf_size = new_screen_size;
set_origin(vc);
+ kfree(oldscreen);
/* do part of a reset_terminal() */
vc->vc_top = 0;
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 91c301775047..a4e520bdd521 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -806,12 +806,22 @@ static int vt_resizex(struct vc_data *vc, struct vt_consize __user *cs)
console_lock();
vcp = vc_cons[i].d;
if (vcp) {
+ int ret;
+ int save_scan_lines = vcp->vc_scan_lines;
+ int save_font_height = vcp->vc_font.height;
+
if (v.v_vlin)
vcp->vc_scan_lines = v.v_vlin;
if (v.v_clin)
vcp->vc_font.height = v.v_clin;
vcp->vc_resize_user = 1;
- vc_resize(vcp, v.v_cols, v.v_rows);
+ ret = vc_resize(vcp, v.v_cols, v.v_rows);
+ if (ret) {
+ vcp->vc_scan_lines = save_scan_lines;
+ vcp->vc_font.height = save_font_height;
+ console_unlock();
+ return ret;
+ }
}
console_unlock();
}
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 8a31fc2b2258..66167830fefd 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -2191,6 +2191,9 @@ static void updatescrollmode(struct fbcon_display *p,
}
}
+#define PITCH(w) (((w) + 7) >> 3)
+#define CALC_FONTSZ(h, p, c) ((h) * (p) * (c)) /* size = height * pitch * charcount */
+
static int fbcon_resize(struct vc_data *vc, unsigned int width,
unsigned int height, unsigned int user)
{
@@ -2200,6 +2203,24 @@ static int fbcon_resize(struct vc_data *vc, unsigned int width,
struct fb_var_screeninfo var = info->var;
int x_diff, y_diff, virt_w, virt_h, virt_fw, virt_fh;
+ if (ops->p && ops->p->userfont && FNTSIZE(vc->vc_font.data)) {
+ int size;
+ int pitch = PITCH(vc->vc_font.width);
+
+ /*
+ * If user font, ensure that a possible change to user font
+ * height or width will not allow a font data out-of-bounds access.
+ * NOTE: must use original charcount in calculation as font
+ * charcount can change and cannot be used to determine the
+ * font data allocated size.
+ */
+ if (pitch <= 0)
+ return -EINVAL;
+ size = CALC_FONTSZ(vc->vc_font.height, pitch, FNTCHARCNT(vc->vc_font.data));
+ if (size > FNTSIZE(vc->vc_font.data))
+ return -EINVAL;
+ }
+
virt_w = FBCON_SWAP(ops->rotate, width, height);
virt_h = FBCON_SWAP(ops->rotate, height, width);
virt_fw = FBCON_SWAP(ops->rotate, vc->vc_font.width,
@@ -2652,7 +2673,7 @@ static int fbcon_set_font(struct vc_data *vc, struct console_font *font,
int size;
int i, csum;
u8 *new_data, *data = font->data;
- int pitch = (font->width+7) >> 3;
+ int pitch = PITCH(font->width);
/* Is there a reason why fbconsole couldn't handle any charcount >256?
* If not this check should be changed to charcount < 256 */
@@ -2668,7 +2689,7 @@ static int fbcon_set_font(struct vc_data *vc, struct console_font *font,
if (fbcon_invalid_charcount(info, charcount))
return -EINVAL;
- size = h * pitch * charcount;
+ size = CALC_FONTSZ(h, pitch, charcount);
new_data = kmalloc(FONT_EXTRA_WORDS * sizeof(int) + size, GFP_USER);