diff options
author | David Ahern <dsahern@gmail.com> | 2021-01-13 20:09:47 -0700 |
---|---|---|
committer | Jakub Kicinski <kuba@kernel.org> | 2021-01-14 16:26:49 -0800 |
commit | 8a909735fa29fb700fef064b339988ff404d2d72 (patch) | |
tree | 66ca2dd962c111c0e7e858081232dd7ebe5c003e /tools/testing | |
parent | d3857b8f0d192e0313990481d223e554db7d878e (diff) | |
download | linux-8a909735fa29fb700fef064b339988ff404d2d72.tar.bz2 |
selftests: Add separate options for server device bindings
Add new options to nettest to specify device binding and expected
device binding for server mode, and update fcnal-test script. This
is needed to allow a single instance of nettest running both server
and client modes to use different device bindings.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'tools/testing')
-rwxr-xr-x | tools/testing/selftests/net/fcnal-test.sh | 282 | ||||
-rw-r--r-- | tools/testing/selftests/net/nettest.c | 14 |
2 files changed, 154 insertions, 142 deletions
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 5d15ded2433b..2514a9cb9530 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -869,7 +869,7 @@ ipv4_tcp_md5() # basic use case log_start - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config" @@ -877,7 +877,7 @@ ipv4_tcp_md5() # client sends MD5, server not configured log_start show_hint "Should timeout since server does not have MD5 auth" - run_cmd nettest -s -d ${VRF} & + run_cmd nettest -s -I ${VRF} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Server no config, client uses password" @@ -885,7 +885,7 @@ ipv4_tcp_md5() # wrong password log_start show_hint "Should timeout since client uses wrong password" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Client uses wrong password" @@ -893,7 +893,7 @@ ipv4_tcp_md5() # client from different address log_start show_hint "Should timeout since server config differs from client" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Client address does not match address configured with password" @@ -904,7 +904,7 @@ ipv4_tcp_md5() # client in prefix log_start - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config" @@ -912,7 +912,7 @@ ipv4_tcp_md5() # client in prefix, wrong password log_start show_hint "Should timeout since client uses wrong password" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password" @@ -920,7 +920,7 @@ ipv4_tcp_md5() # client outside of prefix log_start show_hint "Should timeout since client address is outside of prefix" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & sleep 1 run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix" @@ -930,14 +930,14 @@ ipv4_tcp_md5() # log_start - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF" log_start - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} @@ -945,7 +945,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since client in default VRF uses VRF password" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} @@ -953,21 +953,21 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since client in VRF uses default VRF password" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw" log_start - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF" log_start - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & sleep 1 run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} @@ -975,7 +975,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since client in default VRF uses VRF password" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & sleep 1 run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} @@ -983,7 +983,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since client in VRF uses default VRF password" - run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} & + run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & sleep 1 run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} @@ -993,11 +993,11 @@ ipv4_tcp_md5() # negative tests # log_start - run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP} + run_cmd nettest -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP} log_test $? 1 "MD5: VRF: Device must be a VRF - single address" log_start - run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET} + run_cmd nettest -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET} log_test $? 1 "MD5: VRF: Device must be a VRF - prefix" } @@ -1020,7 +1020,7 @@ ipv4_tcp_novrf() a=${NSA_IP} log_start - run_cmd nettest -s -d ${NSA_DEV} & + run_cmd nettest -s -I ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Device server" @@ -1076,7 +1076,7 @@ ipv4_tcp_novrf() a=${NSA_IP} log_start - run_cmd nettest -s -d ${NSA_DEV} & + run_cmd nettest -s -I ${NSA_DEV} & sleep 1 run_cmd nettest -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection" @@ -1085,7 +1085,7 @@ ipv4_tcp_novrf() do log_start show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope" - run_cmd nettest -s -d ${NSA_DEV} & + run_cmd nettest -s -I ${NSA_DEV} & sleep 1 run_cmd nettest -r ${a} log_test_addr ${a} $? 1 "Device server, unbound client, local connection" @@ -1110,7 +1110,7 @@ ipv4_tcp_novrf() a=${NSA_IP} log_start - run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -d ${NSA_DEV} -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local connection" @@ -1145,13 +1145,13 @@ ipv4_tcp_vrf() log_test_addr ${a} $? 1 "Global server" log_start - run_cmd nettest -s -d ${VRF} -2 ${VRF} & + run_cmd nettest -s -I ${VRF} -3 ${VRF} & sleep 1 run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "VRF server" log_start - run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Device server" @@ -1186,14 +1186,14 @@ ipv4_tcp_vrf() do log_start show_hint "client socket should be bound to VRF" - run_cmd nettest -s -2 ${VRF} & + run_cmd nettest -s -3 ${VRF} & sleep 1 run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Global server" log_start show_hint "client socket should be bound to VRF" - run_cmd nettest -s -d ${VRF} -2 ${VRF} & + run_cmd nettest -s -I ${VRF} -3 ${VRF} & sleep 1 run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "VRF server" @@ -1208,7 +1208,7 @@ ipv4_tcp_vrf() a=${NSA_IP} log_start show_hint "client socket should be bound to device" - run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Device server" @@ -1218,7 +1218,7 @@ ipv4_tcp_vrf() do log_start show_hint "Should fail 'Connection refused' since client is not bound to VRF" - run_cmd nettest -s -d ${VRF} & + run_cmd nettest -s -I ${VRF} & sleep 1 run_cmd nettest -r ${a} log_test_addr ${a} $? 1 "Global server, local connection" @@ -1255,7 +1255,7 @@ ipv4_tcp_vrf() for a in ${NSA_IP} ${VRF_IP} 127.0.0.1 do log_start - run_cmd nettest -s -d ${VRF} -2 ${VRF} & + run_cmd nettest -s -I ${VRF} -3 ${VRF} & sleep 1 run_cmd nettest -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local connection" @@ -1263,26 +1263,26 @@ ipv4_tcp_vrf() a=${NSA_IP} log_start - run_cmd nettest -s -d ${VRF} -2 ${VRF} & + run_cmd nettest -s -I ${VRF} -3 ${VRF} & sleep 1 run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "VRF server, device client, local connection" log_start show_hint "Should fail 'No route to host' since client is out of VRF scope" - run_cmd nettest -s -d ${VRF} & + run_cmd nettest -s -I ${VRF} & sleep 1 run_cmd nettest -r ${a} log_test_addr ${a} $? 1 "VRF server, unbound client, local connection" log_start - run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "Device server, VRF client, local connection" log_start - run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local connection" @@ -1321,7 +1321,7 @@ ipv4_udp_novrf() for a in ${NSA_IP} ${NSA_LO_IP} do log_start - run_cmd nettest -D -s -2 ${NSA_DEV} & + run_cmd nettest -D -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Global server" @@ -1334,7 +1334,7 @@ ipv4_udp_novrf() a=${NSA_IP} log_start - run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Device server" @@ -1393,7 +1393,7 @@ ipv4_udp_novrf() a=${NSA_IP} log_start - run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -D -r ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection" @@ -1402,7 +1402,7 @@ ipv4_udp_novrf() do log_start show_hint "Should fail 'Connection refused' since address is out of device scope" - run_cmd nettest -s -D -d ${NSA_DEV} & + run_cmd nettest -s -D -I ${NSA_DEV} & sleep 1 run_cmd nettest -D -r ${a} log_test_addr ${a} $? 1 "Device server, unbound client, local connection" @@ -1456,7 +1456,7 @@ ipv4_udp_novrf() a=${NSA_IP} log_start - run_cmd nettest -D -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -D -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -D -d ${NSA_DEV} -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn" @@ -1487,13 +1487,13 @@ ipv4_udp_vrf() log_test_addr ${a} $? 1 "Global server" log_start - run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} & + run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "VRF server" log_start - run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server" @@ -1513,26 +1513,26 @@ ipv4_udp_vrf() a=${NSA_IP} log_start - run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} & + run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" log_start - run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} & + run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, enslaved device client, local connection" a=${NSA_IP} log_start - run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn" log_start - run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn" @@ -1547,19 +1547,19 @@ ipv4_udp_vrf() for a in ${NSA_IP} ${VRF_IP} do log_start - run_cmd nettest -D -s -2 ${NSA_DEV} & + run_cmd nettest -D -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Global server" log_start - run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} & + run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "VRF server" log_start - run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server" @@ -1601,31 +1601,31 @@ ipv4_udp_vrf() # a=${NSA_IP} log_start - run_cmd nettest -D -s -2 ${NSA_DEV} & + run_cmd nettest -D -s -3 ${NSA_DEV} & sleep 1 run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn" log_start - run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} & + run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" log_start - run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} & + run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, device client, local conn" log_start - run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn" log_start - run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn" @@ -1633,7 +1633,7 @@ ipv4_udp_vrf() for a in ${VRF_IP} 127.0.0.1 do log_start - run_cmd nettest -D -s -2 ${VRF} & + run_cmd nettest -D -s -3 ${VRF} & sleep 1 run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn" @@ -1642,7 +1642,7 @@ ipv4_udp_vrf() for a in ${VRF_IP} 127.0.0.1 do log_start - run_cmd nettest -s -D -d ${VRF} -2 ${VRF} & + run_cmd nettest -s -D -I ${VRF} -3 ${VRF} & sleep 1 run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" @@ -1697,7 +1697,7 @@ ipv4_addr_bind_novrf() log_test_addr ${a} $? 0 "Raw socket bind to local address" log_start - run_cmd nettest -s -R -P icmp -l ${a} -d ${NSA_DEV} -b + run_cmd nettest -s -R -P icmp -l ${a} -I ${NSA_DEV} -b log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind" done @@ -1720,7 +1720,7 @@ ipv4_addr_bind_novrf() #a=${NSA_LO_IP} #log_start #show_hint "Should fail with 'Cannot assign requested address'" - #run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b + #run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b #log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address" } @@ -1736,17 +1736,17 @@ ipv4_addr_bind_vrf() log_test_addr ${a} $? 0 "Raw socket bind to local address" log_start - run_cmd nettest -s -R -P icmp -l ${a} -d ${NSA_DEV} -b + run_cmd nettest -s -R -P icmp -l ${a} -I ${NSA_DEV} -b log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind" log_start - run_cmd nettest -s -R -P icmp -l ${a} -d ${VRF} -b + run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 0 "Raw socket bind to local address after VRF bind" done a=${NSA_LO_IP} log_start show_hint "Address on loopback is out of VRF scope" - run_cmd nettest -s -R -P icmp -l ${a} -d ${VRF} -b + run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind" # @@ -1755,23 +1755,23 @@ ipv4_addr_bind_vrf() for a in ${NSA_IP} ${VRF_IP} do log_start - run_cmd nettest -s -l ${a} -d ${VRF} -t1 -b + run_cmd nettest -s -l ${a} -I ${VRF} -t1 -b log_test_addr ${a} $? 0 "TCP socket bind to local address" log_start - run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b + run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind" done a=${NSA_LO_IP} log_start show_hint "Address on loopback out of scope for VRF" - run_cmd nettest -s -l ${a} -d ${VRF} -t1 -b + run_cmd nettest -s -l ${a} -I ${VRF} -t1 -b log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF" log_start show_hint "Address on loopback out of scope for device in VRF" - run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b + run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind" } @@ -1818,7 +1818,7 @@ ipv4_rt() for a in ${NSA_IP} ${VRF_IP} do log_start - run_cmd nettest ${varg} -s -d ${VRF} & + run_cmd nettest ${varg} -s -I ${VRF} & sleep 1 run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 @@ -1831,7 +1831,7 @@ ipv4_rt() a=${NSA_IP} log_start - run_cmd nettest ${varg} -s -d ${NSA_DEV} & + run_cmd nettest ${varg} -s -I ${NSA_DEV} & sleep 1 run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 @@ -1886,7 +1886,7 @@ ipv4_rt() for a in ${NSA_IP} ${VRF_IP} do log_start - run_cmd nettest ${varg} -d ${VRF} -s & + run_cmd nettest ${varg} -I ${VRF} -s & sleep 1 run_cmd nettest ${varg} -d ${VRF} -r ${a} & sleep 3 @@ -1910,7 +1910,7 @@ ipv4_rt() setup ${with_vrf} log_start - run_cmd nettest ${varg} -d ${VRF} -s & + run_cmd nettest ${varg} -I ${VRF} -s & sleep 1 run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 @@ -1921,7 +1921,7 @@ ipv4_rt() setup ${with_vrf} log_start - run_cmd nettest ${varg} -d ${NSA_DEV} -s & + run_cmd nettest ${varg} -I ${NSA_DEV} -s & sleep 1 run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 @@ -2333,7 +2333,7 @@ ipv6_tcp_md5() # basic use case log_start - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config" @@ -2341,7 +2341,7 @@ ipv6_tcp_md5() # client sends MD5, server not configured log_start show_hint "Should timeout since server does not have MD5 auth" - run_cmd nettest -6 -s -d ${VRF} & + run_cmd nettest -6 -s -I ${VRF} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Server no config, client uses password" @@ -2349,7 +2349,7 @@ ipv6_tcp_md5() # wrong password log_start show_hint "Should timeout since client uses wrong password" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Client uses wrong password" @@ -2357,7 +2357,7 @@ ipv6_tcp_md5() # client from different address log_start show_hint "Should timeout since server config differs from client" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Client address does not match address configured with password" @@ -2368,7 +2368,7 @@ ipv6_tcp_md5() # client in prefix log_start - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config" @@ -2376,7 +2376,7 @@ ipv6_tcp_md5() # client in prefix, wrong password log_start show_hint "Should timeout since client uses wrong password" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password" @@ -2384,7 +2384,7 @@ ipv6_tcp_md5() # client outside of prefix log_start show_hint "Should timeout since client address is outside of prefix" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & sleep 1 run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix" @@ -2394,14 +2394,14 @@ ipv6_tcp_md5() # log_start - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF" log_start - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} @@ -2409,7 +2409,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since client in default VRF uses VRF password" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW} @@ -2417,21 +2417,21 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since client in VRF uses default VRF password" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw" log_start - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF" log_start - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & sleep 1 run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} @@ -2439,7 +2439,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since client in default VRF uses VRF password" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & sleep 1 run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW} @@ -2447,7 +2447,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since client in VRF uses default VRF password" - run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} & + run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & sleep 1 run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} @@ -2457,11 +2457,11 @@ ipv6_tcp_md5() # negative tests # log_start - run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP6} + run_cmd nettest -6 -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP6} log_test $? 1 "MD5: VRF: Device must be a VRF - single address" log_start - run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET6} + run_cmd nettest -6 -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET6} log_test $? 1 "MD5: VRF: Device must be a VRF - prefix" } @@ -2534,7 +2534,7 @@ ipv6_tcp_novrf() a=${NSA_IP6} log_start - run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection" @@ -2543,7 +2543,7 @@ ipv6_tcp_novrf() do log_start show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope" - run_cmd nettest -6 -s -d ${NSA_DEV} & + run_cmd nettest -6 -s -I ${NSA_DEV} & sleep 1 run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 1 "Device server, unbound client, local connection" @@ -2569,7 +2569,7 @@ ipv6_tcp_novrf() for a in ${NSA_IP6} ${NSA_LINKIP6} do log_start - run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn" @@ -2611,7 +2611,7 @@ ipv6_tcp_vrf() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} & + run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & sleep 1 run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server" @@ -2620,7 +2620,7 @@ ipv6_tcp_vrf() # link local is always bound to ingress device a=${NSA_LINKIP6}%${NSB_DEV} log_start - run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} & + run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server" @@ -2628,7 +2628,7 @@ ipv6_tcp_vrf() for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV} do log_start - run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Device server" @@ -2664,7 +2664,7 @@ ipv6_tcp_vrf() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest -6 -s -2 ${VRF} & + run_cmd nettest -6 -s -3 ${VRF} & sleep 1 run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Global server" @@ -2673,7 +2673,7 @@ ipv6_tcp_vrf() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} & + run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & sleep 1 run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server" @@ -2682,13 +2682,13 @@ ipv6_tcp_vrf() # For LLA, child socket is bound to device a=${NSA_LINKIP6}%${NSB_DEV} log_start - run_cmd nettest -6 -s -2 ${NSA_DEV} & + run_cmd nettest -6 -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Global server" log_start - run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} & + run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server" @@ -2696,7 +2696,7 @@ ipv6_tcp_vrf() for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV} do log_start - run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Device server" @@ -2716,7 +2716,7 @@ ipv6_tcp_vrf() do log_start show_hint "Fails 'Connection refused' since client is not in VRF" - run_cmd nettest -6 -s -d ${VRF} & + run_cmd nettest -6 -s -I ${VRF} & sleep 1 run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 1 "Global server, local connection" @@ -2771,7 +2771,7 @@ ipv6_tcp_vrf() for a in ${NSA_IP6} ${VRF_IP6} ::1 do log_start - run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} & + run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & sleep 1 run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local connection" @@ -2779,7 +2779,7 @@ ipv6_tcp_vrf() a=${NSA_IP6} log_start - run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} & + run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & sleep 1 run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "VRF server, device client, local connection" @@ -2787,13 +2787,13 @@ ipv6_tcp_vrf() a=${NSA_IP6} log_start show_hint "Should fail since unbound client is out of VRF scope" - run_cmd nettest -6 -s -d ${VRF} & + run_cmd nettest -6 -s -I ${VRF} & sleep 1 run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 1 "VRF server, unbound client, local connection" log_start - run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "Device server, VRF client, local connection" @@ -2801,7 +2801,7 @@ ipv6_tcp_vrf() for a in ${NSA_IP6} ${NSA_LINKIP6} do log_start - run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local connection" @@ -2841,13 +2841,13 @@ ipv6_udp_novrf() for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV} do log_start - run_cmd nettest -6 -D -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Global server" log_start - run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Device server" @@ -2855,7 +2855,7 @@ ipv6_udp_novrf() a=${NSA_LO_IP6} log_start - run_cmd nettest -6 -D -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Global server" @@ -2865,7 +2865,7 @@ ipv6_udp_novrf() # behavior. #log_start #show_hint "Should fail since loopback address is out of scope" - #run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + #run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & #sleep 1 #run_cmd_nsb nettest -6 -D -r ${a} #log_test_addr ${a} $? 1 "Device server" @@ -2933,7 +2933,7 @@ ipv6_udp_novrf() a=${NSA_IP6} log_start - run_cmd nettest -6 -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -6 -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection" @@ -2942,7 +2942,7 @@ ipv6_udp_novrf() do log_start show_hint "Should fail 'Connection refused' since address is out of device scope" - run_cmd nettest -6 -s -D -d ${NSA_DEV} & + run_cmd nettest -6 -s -D -I ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -r ${a} log_test_addr ${a} $? 1 "Device server, local connection" @@ -2993,7 +2993,7 @@ ipv6_udp_novrf() a=${NSA_IP6} log_start - run_cmd nettest -6 -D -s -d ${NSA_DEV} -2 ${NSA_DEV} & + run_cmd nettest -6 -D -s -I ${NSA_DEV} -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn" @@ -3040,7 +3040,7 @@ ipv6_udp_vrf() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "VRF server" @@ -3049,7 +3049,7 @@ ipv6_udp_vrf() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server" @@ -3080,7 +3080,7 @@ ipv6_udp_vrf() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest -6 -D -d ${VRF} -s & + run_cmd nettest -6 -D -I ${VRF} -s & sleep 1 run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" @@ -3095,19 +3095,19 @@ ipv6_udp_vrf() log_test_addr ${a} $? 1 "Global server, device client, local conn" log_start - run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, device client, local conn" log_start - run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn" log_start - run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn" @@ -3122,7 +3122,7 @@ ipv6_udp_vrf() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest -6 -D -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Global server" @@ -3131,7 +3131,7 @@ ipv6_udp_vrf() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "VRF server" @@ -3140,7 +3140,7 @@ ipv6_udp_vrf() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & sleep 1 run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server" @@ -3184,13 +3184,13 @@ ipv6_udp_vrf() # a=${NSA_IP6} log_start - run_cmd nettest -6 -D -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -s -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn" #log_start - run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" @@ -3198,13 +3198,13 @@ ipv6_udp_vrf() a=${VRF_IP6} log_start - run_cmd nettest -6 -D -s -2 ${VRF} & + run_cmd nettest -6 -D -s -3 ${VRF} & sleep 1 run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn" log_start - run_cmd nettest -6 -D -d ${VRF} -s -2 ${VRF} & + run_cmd nettest -6 -D -I ${VRF} -s -3 ${VRF} & sleep 1 run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" @@ -3220,25 +3220,25 @@ ipv6_udp_vrf() # device to global IP a=${NSA_IP6} log_start - run_cmd nettest -6 -D -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -s -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Global server, device client, local conn" log_start - run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, device client, local conn" log_start - run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Device server, VRF client, local conn" log_start - run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & sleep 1 run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn" @@ -3332,7 +3332,7 @@ ipv6_addr_bind_novrf() log_test_addr ${a} $? 0 "Raw socket bind to local address" log_start - run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b + run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${NSA_DEV} -b log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind" done @@ -3345,13 +3345,13 @@ ipv6_addr_bind_novrf() log_test_addr ${a} $? 0 "TCP socket bind to local address" log_start - run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b + run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind" a=${NSA_LO_IP6} log_start show_hint "Should fail with 'Cannot assign requested address'" - run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b + run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address" } @@ -3363,18 +3363,18 @@ ipv6_addr_bind_vrf() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b + run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 0 "Raw socket bind to local address after vrf bind" log_start - run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b + run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${NSA_DEV} -b log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind" done a=${NSA_LO_IP6} log_start show_hint "Address on loopback is out of VRF scope" - run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b + run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "Raw socket bind to invalid local address after vrf bind" # @@ -3384,29 +3384,29 @@ ipv6_addr_bind_vrf() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b + run_cmd nettest -6 -s -l ${a} -I ${VRF} -t1 -b log_test_addr ${a} $? 0 "TCP socket bind to local address with VRF bind" done a=${NSA_IP6} log_start - run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b + run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b log_test_addr ${a} $? 0 "TCP socket bind to local address with device bind" a=${VRF_IP6} log_start - run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b + run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b log_test_addr ${a} $? 1 "TCP socket bind to VRF address with device bind" a=${NSA_LO_IP6} log_start show_hint "Address on loopback out of scope for VRF" - run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b + run_cmd nettest -6 -s -l ${a} -I ${VRF} -t1 -b log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF" log_start show_hint "Address on loopback out of scope for device in VRF" - run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b + run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind" } @@ -3454,7 +3454,7 @@ ipv6_rt() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest ${varg} -d ${VRF} -s & + run_cmd nettest ${varg} -I ${VRF} -s & sleep 1 run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 @@ -3468,7 +3468,7 @@ ipv6_rt() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest ${varg} -d ${NSA_DEV} -s & + run_cmd nettest ${varg} -I ${NSA_DEV} -s & sleep 1 run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 @@ -3525,7 +3525,7 @@ ipv6_rt() for a in ${NSA_IP6} ${VRF_IP6} do log_start - run_cmd nettest ${varg} -d ${VRF} -s & + run_cmd nettest ${varg} -I ${VRF} -s & sleep 1 run_cmd nettest ${varg} -d ${VRF} -r ${a} & sleep 3 @@ -3549,7 +3549,7 @@ ipv6_rt() setup ${with_vrf} log_start - run_cmd nettest ${varg} -d ${VRF} -s & + run_cmd nettest ${varg} -I ${VRF} -s & sleep 1 run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 @@ -3560,7 +3560,7 @@ ipv6_rt() setup ${with_vrf} log_start - run_cmd nettest ${varg} -d ${NSA_DEV} -s & + run_cmd nettest ${varg} -I ${NSA_DEV} -s & sleep 1 run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c index e20e74e001a2..1707af21eb15 100644 --- a/tools/testing/selftests/net/nettest.c +++ b/tools/testing/selftests/net/nettest.c @@ -79,6 +79,7 @@ struct sock_args { int use_setsockopt; int use_cmsg; const char *dev; + const char *server_dev; int ifindex; const char *clientns; @@ -96,6 +97,7 @@ struct sock_args { /* expected addresses and device index for connection */ const char *expected_dev; + const char *expected_server_dev; int expected_ifindex; /* local address */ @@ -1424,6 +1426,8 @@ static int do_server(struct sock_args *args, int ipc_fd) log_msg("Switched server netns\n"); } + args->dev = args->server_dev; + args->expected_dev = args->expected_server_dev; if (resolve_devices(args) || validate_addresses(args)) goto err_exit; @@ -1767,7 +1771,7 @@ static int ipc_parent(int cpid, int fd, struct sock_args *args) return client_status; } -#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:X:m:d:BN:O:SCi6L:0:1:2:Fbq" +#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:X:m:d:I:BN:O:SCi6L:0:1:2:3:Fbq" static void print_usage(char *prog) { @@ -1791,6 +1795,7 @@ static void print_usage(char *prog) " -l addr local address to bind to\n" "\n" " -d dev bind socket to given device name\n" + " -I dev bind socket to given device name - server mode\n" " -S use setsockopt (IP_UNICAST_IF or IP_MULTICAST_IF)\n" " to set device binding\n" " -C use cmsg and IP_PKTINFO to specify device binding\n" @@ -1807,6 +1812,7 @@ static void print_usage(char *prog) " -0 addr Expected local address\n" " -1 addr Expected remote address\n" " -2 dev Expected device name (or index) to receive packet\n" + " -3 dev Expected device name (or index) to receive packets - server mode\n" "\n" " -b Bind test only.\n" " -q Be quiet. Run test without printing anything.\n" @@ -1919,6 +1925,9 @@ int main(int argc, char *argv[]) case 'd': args.dev = optarg; break; + case 'I': + args.server_dev = optarg; + break; case 'i': interactive = 1; break; @@ -1945,6 +1954,9 @@ int main(int argc, char *argv[]) case '2': args.expected_dev = optarg; break; + case '3': + args.expected_server_dev = optarg; + break; case 'q': quiet = 1; break; |