diff options
author | Naresh Kamboju <naresh.kamboju@linaro.org> | 2015-08-18 12:31:59 +0530 |
---|---|---|
committer | Shuah Khan <shuahkh@osg.samsung.com> | 2015-08-27 16:02:01 -0600 |
commit | f21fb798fe38cf87b177d45820991f0e315c0ba8 (patch) | |
tree | 026d34b194459b2faefbd65e37ccaead447260e7 /tools/testing/selftests/zram/zram_lib.sh | |
parent | d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754 (diff) | |
download | linux-f21fb798fe38cf87b177d45820991f0e315c0ba8.tar.bz2 |
selftests/zram: Adding zram tests
zram: Compressed RAM based block devices
----------------------------------------
The zram module creates RAM based block devices named /dev/zram<id>
(<id> = 0, 1, ...). Pages written to these disks are compressed and stored
in memory itself. These disks allow very fast I/O and compression provides
good amounts of memory savings. Some of the usecases include /tmp storage,
use as swap disks, various caches under /var and maybe many more :)
Statistics for individual zram devices are exported through sysfs nodes at
/sys/block/zram<id>/
This patch is to validate the zram functionality. Test interacts with block
device /dev/zram<id> and sysfs nodes /sys/block/zram<id>/
zram.sh: sanity check of CONFIG_ZRAM and to run zram01 and zram02 tests
zram01.sh: creates general purpose ram disks with different filesystems
zram02.sh: creates block device for swap
zram_lib.sh: create library with initialization/cleanup functions
README: ZRAM introduction and Kconfig required.
Makefile: To run zram tests
zram test output
-----------------
./zram.sh
--------------------
running zram tests
--------------------
/dev/zram0 device file found: OK
set max_comp_streams to zram device(s)
/sys/block/zram0/max_comp_streams = '2' (1/1)
zram max streams: OK
test that we can set compression algorithm
supported algs: [lzo] lz4
/sys/block/zram0/comp_algorithm = 'lzo' (1/1)
zram set compression algorithm: OK
set disk size to zram device(s)
/sys/block/zram0/disksize = '2097152' (1/1)
zram set disksizes: OK
set memory limit to zram device(s)
/sys/block/zram0/mem_limit = '2M' (1/1)
zram set memory limit: OK
make ext4 filesystem on /dev/zram0
zram mkfs.ext4: OK
mount /dev/zram0
zram mount of zram device(s): OK
fill zram0...
zram0 can be filled with '1932' KB
zram used 3M, zram disk sizes 2097152M
zram compression ratio: 699050.66:1: OK
zram cleanup
zram01 : [PASS]
/dev/zram0 device file found: OK
set max_comp_streams to zram device(s)
/sys/block/zram0/max_comp_streams = '2' (1/1)
zram max streams: OK
set disk size to zram device(s)
/sys/block/zram0/disksize = '1048576' (1/1)
zram set disksizes: OK
set memory limit to zram device(s)
/sys/block/zram0/mem_limit = '1M' (1/1)
zram set memory limit: OK
make swap with zram device(s)
done with /dev/zram0
zram making zram mkswap and swapon: OK
zram swapoff: OK
zram cleanup
zram02 : [PASS]
CC: Shuah Khan <shuahkh@osg.samsung.com>
CC: Tyler Baker <tyler.baker@linaro.org>
CC: Milosz Wasilewski <milosz.wasilewski@linaro.org>
CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-By: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Diffstat (limited to 'tools/testing/selftests/zram/zram_lib.sh')
-rwxr-xr-x | tools/testing/selftests/zram/zram_lib.sh | 222 |
1 files changed, 222 insertions, 0 deletions
diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh new file mode 100755 index 000000000000..3b6abf1942d7 --- /dev/null +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -0,0 +1,222 @@ +#!/bin/sh +# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# Author: Alexey Kodanev <alexey.kodanev@oracle.com> +# Modified: Naresh Kamboju <naresh.kamboju@linaro.org> + +MODULE=0 +dev_makeswap=-1 +dev_mounted=-1 + +trap INT + +zram_cleanup() +{ + echo "zram cleanup" + local i= + for i in $(seq 0 $dev_makeswap); do + swapoff /dev/zram$i + done + + for i in $(seq 0 $dev_mounted); do + umount /dev/zram$i + done + + for i in $(seq 0 $(($dev_num - 1))); do + echo 1 > /sys/block/zram${i}/reset + rm -rf zram$i + done + +} + +zram_unload() +{ + if [ $MODULE -ne 0 ] ; then + echo "zram rmmod zram" + rmmod zram > /dev/null 2>&1 + fi +} + +zram_load() +{ + # check zram module exists + MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko + if [ -f $MODULE_PATH ]; then + MODULE=1 + echo "create '$dev_num' zram device(s)" + modprobe zram num_devices=$dev_num + if [ $? -ne 0 ]; then + echo "failed to insert zram module" + exit 1 + fi + + dev_num_created=$(ls /dev/zram* | wc -w) + + if [ "$dev_num_created" -ne "$dev_num" ]; then + echo "unexpected num of devices: $dev_num_created" + ERR_CODE=-1 + else + echo "zram load module successful" + fi + elif [ -b /dev/zram0 ]; then + echo "/dev/zram0 device file found: OK" + else + echo "ERROR: No zram.ko module or no /dev/zram0 device found" + echo "$TCID : CONFIG_ZRAM is not set" + exit 1 + fi +} + +zram_max_streams() +{ + echo "set max_comp_streams to zram device(s)" + + local i=0 + for max_s in $zram_max_streams; do + local sys_path="/sys/block/zram${i}/max_comp_streams" + echo $max_s > $sys_path || \ + echo "FAIL failed to set '$max_s' to $sys_path" + sleep 1 + local max_streams=$(cat $sys_path) + + [ "$max_s" -ne "$max_streams" ] && \ + echo "FAIL can't set max_streams '$max_s', get $max_stream" + + i=$(($i + 1)) + echo "$sys_path = '$max_streams' ($i/$dev_num)" + done + + echo "zram max streams: OK" +} + +zram_compress_alg() +{ + echo "test that we can set compression algorithm" + + local algs=$(cat /sys/block/zram0/comp_algorithm) + echo "supported algs: $algs" + local i=0 + for alg in $zram_algs; do + local sys_path="/sys/block/zram${i}/comp_algorithm" + echo "$alg" > $sys_path || \ + echo "FAIL can't set '$alg' to $sys_path" + i=$(($i + 1)) + echo "$sys_path = '$alg' ($i/$dev_num)" + done + + echo "zram set compression algorithm: OK" +} + +zram_set_disksizes() +{ + echo "set disk size to zram device(s)" + local i=0 + for ds in $zram_sizes; do + local sys_path="/sys/block/zram${i}/disksize" + echo "$ds" > $sys_path || \ + echo "FAIL can't set '$ds' to $sys_path" + + i=$(($i + 1)) + echo "$sys_path = '$ds' ($i/$dev_num)" + done + + echo "zram set disksizes: OK" +} + +zram_set_memlimit() +{ + echo "set memory limit to zram device(s)" + + local i=0 + for ds in $zram_mem_limits; do + local sys_path="/sys/block/zram${i}/mem_limit" + echo "$ds" > $sys_path || \ + echo "FAIL can't set '$ds' to $sys_path" + + i=$(($i + 1)) + echo "$sys_path = '$ds' ($i/$dev_num)" + done + + echo "zram set memory limit: OK" +} + +zram_makeswap() +{ + echo "make swap with zram device(s)" + local i=0 + for i in $(seq 0 $(($dev_num - 1))); do + mkswap /dev/zram$i > err.log 2>&1 + if [ $? -ne 0 ]; then + cat err.log + echo "FAIL mkswap /dev/zram$1 failed" + fi + + swapon /dev/zram$i > err.log 2>&1 + if [ $? -ne 0 ]; then + cat err.log + echo "FAIL swapon /dev/zram$1 failed" + fi + + echo "done with /dev/zram$i" + dev_makeswap=$i + done + + echo "zram making zram mkswap and swapon: OK" +} + +zram_swapoff() +{ + local i= + for i in $(seq 0 $dev_makeswap); do + swapoff /dev/zram$i > err.log 2>&1 + if [ $? -ne 0 ]; then + cat err.log + echo "FAIL swapoff /dev/zram$i failed" + fi + done + dev_makeswap=-1 + + echo "zram swapoff: OK" +} + +zram_makefs() +{ + local i=0 + for fs in $zram_filesystems; do + # if requested fs not supported default it to ext2 + which mkfs.$fs > /dev/null 2>&1 || fs=ext2 + + echo "make $fs filesystem on /dev/zram$i" + mkfs.$fs /dev/zram$i > err.log 2>&1 + if [ $? -ne 0 ]; then + cat err.log + echo "FAIL failed to make $fs on /dev/zram$i" + fi + i=$(($i + 1)) + echo "zram mkfs.$fs: OK" + done +} + +zram_mount() +{ + local i=0 + for i in $(seq 0 $(($dev_num - 1))); do + echo "mount /dev/zram$i" + mkdir zram$i + mount /dev/zram$i zram$i > /dev/null || \ + echo "FAIL mount /dev/zram$i failed" + dev_mounted=$i + done + + echo "zram mount of zram device(s): OK" +} |