Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
 "With over 300 commits it's been a busy cycle - with most of the work
  concentrated on the tooling side (as it should).

  The main kernel side enhancements were:

   - Add per event callchain limit: Recently we introduced a sysctl to
     tune the max-stack for all events for which callchains were
     requested:

       $ sysctl kernel.perf_event_max_stack
       kernel.perf_event_max_stack = 127

     Now this patch introduces a way to configure this per event, i.e.
     this becomes possible:

       $ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a

     allowing finer tuning of how much buffer space callchains use.

     This uses an u16 from the reserved space at the end, leaving
     another u16 for future use.

     There has been interest in even finer tuning, namely to control the
     max stack for kernel and userspace callchains separately.  Further
     discussion is needed, we may for instance use the remaining u16 for
     that and when it is present, assume that the sample_max_stack
     introduced in this patch applies for the kernel, and the u16 left
     is used for limiting the userspace callchain (Arnaldo Carvalho de
     Melo)

   - Optimize AUX event (hardware assisted side-band event) delivery
     (Kan Liang)

   - Rework Intel family name macro usage (this is partially x86 arch
     work) (Dave Hansen)

   - Refine and fix Intel LBR support (David Carrillo-Cisneros)

   - Add support for Intel 'TopDown' events (Andi Kleen)

   - Intel uncore PMU driver fixes and enhancements (Kan Liang)

   - ... other misc changes.

  Here's an incomplete list of the tooling enhancements (but there's
  much more, see the shortlog and the git log for details):

   - Support cross unwinding, i.e.  collecting '--call-graph dwarf'
     perf.data files in one machine and then doing analysis in another
     machine of a different hardware architecture.  This enables, for
     instance, to do:

       $ perf record -a --call-graph dwarf

     on a x86-32 or aarch64 system and then do 'perf report' on it on a
     x86_64 workstation (He Kuang)

   - Allow reading from a backward ring buffer (one setup via
     sys_perf_event_open() with perf_event_attr.write_backward = 1)
     (Wang Nan)

   - Finish merging initial SDT (Statically Defined Traces) support, see
     cset comments for details about how it all works (Masami Hiramatsu)

   - Support attaching eBPF programs to tracepoints (Wang Nan)

   - Add demangling of symbols in programs written in the Rust language
     (David Tolnay)

   - Add support for tracepoints in the python binding, including an
     example, that sets up and parses sched:sched_switch events,
     tools/perf/python/tracepoint.py (Jiri Olsa)

   - Introduce --stdio-color to set up the color output mode selection
     in 'annotate' and 'report', allowing emit color escape sequences
     when redirecting the output of these tools (Arnaldo Carvalho de
     Melo)

   - Add 'callindent' option to 'perf script -F', to indent the Intel PT
     call stack, making this output more ftrace-like (Adrian Hunter,
     Andi Kleen)

   - Allow dumping the object files generated by llvm when processing
     eBPF scriptlet events (Wang Nan)

   - Add stackcollapse.py script to help generating flame graphs (Paolo
     Bonzini)

   - Add --ldlat option to 'perf mem' to specify load latency for loads
     event (e.g. cpu/mem-loads/ ) (Jiri Olsa)

   - Tooling support for Intel TopDown counters, recently added to the
     kernel (Andi Kleen)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits)
  perf tests: Add is_printable_array test
  perf tools: Make is_printable_array global
  perf script python: Fix string vs byte array resolving
  perf probe: Warn unmatched function filter correctly
  perf cpu_map: Add more helpers
  perf stat: Balance opening and reading events
  tools: Copy linux/{hash,poison}.h and check for drift
  perf tools: Remove include/linux/list.h from perf's MANIFEST
  tools: Copy the bitops files accessed from the kernel and check for drift
  Remove: kernel unistd*h files from perf's MANIFEST, not used
  perf tools: Remove tools/perf/util/include/linux/const.h
  perf tools: Remove tools/perf/util/include/asm/byteorder.h
  perf tools: Add missing linux/compiler.h include to perf-sys.h
  perf jit: Remove some no-op error handling
  perf jit: Add missing curly braces
  objtool: Initialize variable to silence old compiler
  objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
  perf record: Add --tail-synthesize option
  perf session: Don't warn about out of order event if write_backward is used
  perf tools: Enable overwrite settings
  ...

1 files changed, 148 insertions, 4 deletions

diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c
index 98f127abfa42..a5fbc012e3df 100644
--- a/tools/perf/util/python.c
+++ b/tools/perf/util/python.c
@@ -2,6 +2,7 @@
 #include <structmember.h>
 #include <inttypes.h>
 #include <poll.h>
+#include <linux/err.h>
 #include "evlist.h"
 #include "evsel.h"
 #include "event.h"
@@ -47,6 +48,7 @@ PyMODINIT_FUNC initperf(void);
 
 struct pyrf_event {
 	PyObject_HEAD
+	struct perf_evsel *evsel;
 	struct perf_sample sample;
 	union perf_event   event;
 };
@@ -288,6 +290,85 @@ static PyObject *pyrf_sample_event__repr(struct pyrf_event *pevent)
 	return ret;
 }
 
+static bool is_tracepoint(struct pyrf_event *pevent)
+{
+	return pevent->evsel->attr.type == PERF_TYPE_TRACEPOINT;
+}
+
+static PyObject*
+tracepoint_field(struct pyrf_event *pe, struct format_field *field)
+{
+	struct pevent *pevent = field->event->pevent;
+	void *data = pe->sample.raw_data;
+	PyObject *ret = NULL;
+	unsigned long long val;
+	unsigned int offset, len;
+
+	if (field->flags & FIELD_IS_ARRAY) {
+		offset = field->offset;
+		len    = field->size;
+		if (field->flags & FIELD_IS_DYNAMIC) {
+			val     = pevent_read_number(pevent, data + offset, len);
+			offset  = val;
+			len     = offset >> 16;
+			offset &= 0xffff;
+		}
+		if (field->flags & FIELD_IS_STRING &&
+		    is_printable_array(data + offset, len)) {
+			ret = PyString_FromString((char *)data + offset);
+		} else {
+			ret = PyByteArray_FromStringAndSize((const char *) data + offset, len);
+			field->flags &= ~FIELD_IS_STRING;
+		}
+	} else {
+		val = pevent_read_number(pevent, data + field->offset,
+					 field->size);
+		if (field->flags & FIELD_IS_POINTER)
+			ret = PyLong_FromUnsignedLong((unsigned long) val);
+		else if (field->flags & FIELD_IS_SIGNED)
+			ret = PyLong_FromLong((long) val);
+		else
+			ret = PyLong_FromUnsignedLong((unsigned long) val);
+	}
+
+	return ret;
+}
+
+static PyObject*
+get_tracepoint_field(struct pyrf_event *pevent, PyObject *attr_name)
+{
+	const char *str = PyString_AsString(PyObject_Str(attr_name));
+	struct perf_evsel *evsel = pevent->evsel;
+	struct format_field *field;
+
+	if (!evsel->tp_format) {
+		struct event_format *tp_format;
+
+		tp_format = trace_event__tp_format_id(evsel->attr.config);
+		if (!tp_format)
+			return NULL;
+
+		evsel->tp_format = tp_format;
+	}
+
+	field = pevent_find_any_field(evsel->tp_format, str);
+	if (!field)
+		return NULL;
+
+	return tracepoint_field(pevent, field);
+}
+
+static PyObject*
+pyrf_sample_event__getattro(struct pyrf_event *pevent, PyObject *attr_name)
+{
+	PyObject *obj = NULL;
+
+	if (is_tracepoint(pevent))
+		obj = get_tracepoint_field(pevent, attr_name);
+
+	return obj ?: PyObject_GenericGetAttr((PyObject *) pevent, attr_name);
+}
+
 static PyTypeObject pyrf_sample_event__type = {
 	PyVarObject_HEAD_INIT(NULL, 0)
 	.tp_name	= "perf.sample_event",
@@ -296,6 +377,7 @@ static PyTypeObject pyrf_sample_event__type = {
 	.tp_doc		= pyrf_sample_event__doc,
 	.tp_members	= pyrf_sample_event__members,
 	.tp_repr	= (reprfunc)pyrf_sample_event__repr,
+	.tp_getattro	= (getattrofunc) pyrf_sample_event__getattro,
 };
 
 static char pyrf_context_switch_event__doc[] = PyDoc_STR("perf context_switch event object.");
@@ -653,6 +735,7 @@ static int pyrf_evsel__init(struct pyrf_evsel *pevsel,
 	attr.precise_ip	    = precise_ip;
 	attr.mmap_data	    = mmap_data;
 	attr.sample_id_all  = sample_id_all;
+	attr.size	    = sizeof(attr);
 
 	perf_evsel__init(&pevsel->evsel, &attr, idx);
 	return 0;
@@ -863,13 +946,22 @@ static PyObject *pyrf_evlist__read_on_cpu(struct pyrf_evlist *pevlist,
 	if (event != NULL) {
 		PyObject *pyevent = pyrf_event__new(event);
 		struct pyrf_event *pevent = (struct pyrf_event *)pyevent;
-
-		perf_evlist__mmap_consume(evlist, cpu);
+		struct perf_evsel *evsel;
 
 		if (pyevent == NULL)
 			return PyErr_NoMemory();
 
-		err = perf_evlist__parse_sample(evlist, event, &pevent->sample);
+		evsel = perf_evlist__event2evsel(evlist, event);
+		if (!evsel)
+			return Py_None;
+
+		pevent->evsel = evsel;
+
+		err = perf_evsel__parse_sample(evsel, event, &pevent->sample);
+
+		/* Consume the even only after we parsed it out. */
+		perf_evlist__mmap_consume(evlist, cpu);
+
 		if (err)
 			return PyErr_Format(PyExc_OSError,
 					    "perf: can't parse sample, err=%d", err);
@@ -957,7 +1049,7 @@ static PyObject *pyrf_evlist__item(PyObject *obj, Py_ssize_t i)
 	if (i >= pevlist->evlist.nr_entries)
 		return NULL;
 
-	evlist__for_each(&pevlist->evlist, pos) {
+	evlist__for_each_entry(&pevlist->evlist, pos) {
 		if (i-- == 0)
 			break;
 	}
@@ -1073,7 +1165,32 @@ static struct {
 	{ .name = NULL, },
 };
 
+static PyObject *pyrf__tracepoint(struct pyrf_evsel *pevsel,
+				  PyObject *args, PyObject *kwargs)
+{
+	struct event_format *tp_format;
+	static char *kwlist[] = { "sys", "name", NULL };
+	char *sys  = NULL;
+	char *name = NULL;
+
+	if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|ss", kwlist,
+					 &sys, &name))
+		return NULL;
+
+	tp_format = trace_event__tp_format(sys, name);
+	if (IS_ERR(tp_format))
+		return PyInt_FromLong(-1);
+
+	return PyInt_FromLong(tp_format->id);
+}
+
 static PyMethodDef perf__methods[] = {
+	{
+		.ml_name  = "tracepoint",
+		.ml_meth  = (PyCFunction) pyrf__tracepoint,
+		.ml_flags = METH_VARARGS | METH_KEYWORDS,
+		.ml_doc	  = PyDoc_STR("Get tracepoint config.")
+	},
 	{ .ml_name = NULL, }
 };
 
@@ -1100,6 +1217,33 @@ PyMODINIT_FUNC initperf(void)
 	Py_INCREF(&pyrf_evsel__type);
 	PyModule_AddObject(module, "evsel", (PyObject*)&pyrf_evsel__type);
 
+	Py_INCREF(&pyrf_mmap_event__type);
+	PyModule_AddObject(module, "mmap_event", (PyObject *)&pyrf_mmap_event__type);
+
+	Py_INCREF(&pyrf_lost_event__type);
+	PyModule_AddObject(module, "lost_event", (PyObject *)&pyrf_lost_event__type);
+
+	Py_INCREF(&pyrf_comm_event__type);
+	PyModule_AddObject(module, "comm_event", (PyObject *)&pyrf_comm_event__type);
+
+	Py_INCREF(&pyrf_task_event__type);
+	PyModule_AddObject(module, "task_event", (PyObject *)&pyrf_task_event__type);
+
+	Py_INCREF(&pyrf_throttle_event__type);
+	PyModule_AddObject(module, "throttle_event", (PyObject *)&pyrf_throttle_event__type);
+
+	Py_INCREF(&pyrf_task_event__type);
+	PyModule_AddObject(module, "task_event", (PyObject *)&pyrf_task_event__type);
+
+	Py_INCREF(&pyrf_read_event__type);
+	PyModule_AddObject(module, "read_event", (PyObject *)&pyrf_read_event__type);
+
+	Py_INCREF(&pyrf_sample_event__type);
+	PyModule_AddObject(module, "sample_event", (PyObject *)&pyrf_sample_event__type);
+
+	Py_INCREF(&pyrf_context_switch_event__type);
+	PyModule_AddObject(module, "switch_event", (PyObject *)&pyrf_context_switch_event__type);
+
 	Py_INCREF(&pyrf_thread_map__type);
 	PyModule_AddObject(module, "thread_map", (PyObject*)&pyrf_thread_map__type);