Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
 "With over 300 commits it's been a busy cycle - with most of the work
  concentrated on the tooling side (as it should).

  The main kernel side enhancements were:

   - Add per event callchain limit: Recently we introduced a sysctl to
     tune the max-stack for all events for which callchains were
     requested:

       $ sysctl kernel.perf_event_max_stack
       kernel.perf_event_max_stack = 127

     Now this patch introduces a way to configure this per event, i.e.
     this becomes possible:

       $ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a

     allowing finer tuning of how much buffer space callchains use.

     This uses an u16 from the reserved space at the end, leaving
     another u16 for future use.

     There has been interest in even finer tuning, namely to control the
     max stack for kernel and userspace callchains separately.  Further
     discussion is needed, we may for instance use the remaining u16 for
     that and when it is present, assume that the sample_max_stack
     introduced in this patch applies for the kernel, and the u16 left
     is used for limiting the userspace callchain (Arnaldo Carvalho de
     Melo)

   - Optimize AUX event (hardware assisted side-band event) delivery
     (Kan Liang)

   - Rework Intel family name macro usage (this is partially x86 arch
     work) (Dave Hansen)

   - Refine and fix Intel LBR support (David Carrillo-Cisneros)

   - Add support for Intel 'TopDown' events (Andi Kleen)

   - Intel uncore PMU driver fixes and enhancements (Kan Liang)

   - ... other misc changes.

  Here's an incomplete list of the tooling enhancements (but there's
  much more, see the shortlog and the git log for details):

   - Support cross unwinding, i.e.  collecting '--call-graph dwarf'
     perf.data files in one machine and then doing analysis in another
     machine of a different hardware architecture.  This enables, for
     instance, to do:

       $ perf record -a --call-graph dwarf

     on a x86-32 or aarch64 system and then do 'perf report' on it on a
     x86_64 workstation (He Kuang)

   - Allow reading from a backward ring buffer (one setup via
     sys_perf_event_open() with perf_event_attr.write_backward = 1)
     (Wang Nan)

   - Finish merging initial SDT (Statically Defined Traces) support, see
     cset comments for details about how it all works (Masami Hiramatsu)

   - Support attaching eBPF programs to tracepoints (Wang Nan)

   - Add demangling of symbols in programs written in the Rust language
     (David Tolnay)

   - Add support for tracepoints in the python binding, including an
     example, that sets up and parses sched:sched_switch events,
     tools/perf/python/tracepoint.py (Jiri Olsa)

   - Introduce --stdio-color to set up the color output mode selection
     in 'annotate' and 'report', allowing emit color escape sequences
     when redirecting the output of these tools (Arnaldo Carvalho de
     Melo)

   - Add 'callindent' option to 'perf script -F', to indent the Intel PT
     call stack, making this output more ftrace-like (Adrian Hunter,
     Andi Kleen)

   - Allow dumping the object files generated by llvm when processing
     eBPF scriptlet events (Wang Nan)

   - Add stackcollapse.py script to help generating flame graphs (Paolo
     Bonzini)

   - Add --ldlat option to 'perf mem' to specify load latency for loads
     event (e.g. cpu/mem-loads/ ) (Jiri Olsa)

   - Tooling support for Intel TopDown counters, recently added to the
     kernel (Andi Kleen)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits)
  perf tests: Add is_printable_array test
  perf tools: Make is_printable_array global
  perf script python: Fix string vs byte array resolving
  perf probe: Warn unmatched function filter correctly
  perf cpu_map: Add more helpers
  perf stat: Balance opening and reading events
  tools: Copy linux/{hash,poison}.h and check for drift
  perf tools: Remove include/linux/list.h from perf's MANIFEST
  tools: Copy the bitops files accessed from the kernel and check for drift
  Remove: kernel unistd*h files from perf's MANIFEST, not used
  perf tools: Remove tools/perf/util/include/linux/const.h
  perf tools: Remove tools/perf/util/include/asm/byteorder.h
  perf tools: Add missing linux/compiler.h include to perf-sys.h
  perf jit: Remove some no-op error handling
  perf jit: Add missing curly braces
  objtool: Initialize variable to silence old compiler
  objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
  perf record: Add --tail-synthesize option
  perf session: Don't warn about out of order event if write_backward is used
  perf tools: Enable overwrite settings
  ...

1 files changed, 224 insertions, 0 deletions

diff --git a/tools/arch/arm/include/uapi/asm/kvm.h b/tools/arch/arm/include/uapi/asm/kvm.h
new file mode 100644
index 000000000000..a2b3eb313a25
--- /dev/null
+++ b/tools/arch/arm/include/uapi/asm/kvm.h
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef __ARM_KVM_H__
+#define __ARM_KVM_H__
+
+#include <linux/types.h>
+#include <linux/psci.h>
+#include <asm/ptrace.h>
+
+#define __KVM_HAVE_GUEST_DEBUG
+#define __KVM_HAVE_IRQ_LINE
+#define __KVM_HAVE_READONLY_MEM
+
+#define KVM_REG_SIZE(id)						\
+	(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
+
+/* Valid for svc_regs, abt_regs, und_regs, irq_regs in struct kvm_regs */
+#define KVM_ARM_SVC_sp		svc_regs[0]
+#define KVM_ARM_SVC_lr		svc_regs[1]
+#define KVM_ARM_SVC_spsr	svc_regs[2]
+#define KVM_ARM_ABT_sp		abt_regs[0]
+#define KVM_ARM_ABT_lr		abt_regs[1]
+#define KVM_ARM_ABT_spsr	abt_regs[2]
+#define KVM_ARM_UND_sp		und_regs[0]
+#define KVM_ARM_UND_lr		und_regs[1]
+#define KVM_ARM_UND_spsr	und_regs[2]
+#define KVM_ARM_IRQ_sp		irq_regs[0]
+#define KVM_ARM_IRQ_lr		irq_regs[1]
+#define KVM_ARM_IRQ_spsr	irq_regs[2]
+
+/* Valid only for fiq_regs in struct kvm_regs */
+#define KVM_ARM_FIQ_r8		fiq_regs[0]
+#define KVM_ARM_FIQ_r9		fiq_regs[1]
+#define KVM_ARM_FIQ_r10		fiq_regs[2]
+#define KVM_ARM_FIQ_fp		fiq_regs[3]
+#define KVM_ARM_FIQ_ip		fiq_regs[4]
+#define KVM_ARM_FIQ_sp		fiq_regs[5]
+#define KVM_ARM_FIQ_lr		fiq_regs[6]
+#define KVM_ARM_FIQ_spsr	fiq_regs[7]
+
+struct kvm_regs {
+	struct pt_regs usr_regs;	/* R0_usr - R14_usr, PC, CPSR */
+	unsigned long svc_regs[3];	/* SP_svc, LR_svc, SPSR_svc */
+	unsigned long abt_regs[3];	/* SP_abt, LR_abt, SPSR_abt */
+	unsigned long und_regs[3];	/* SP_und, LR_und, SPSR_und */
+	unsigned long irq_regs[3];	/* SP_irq, LR_irq, SPSR_irq */
+	unsigned long fiq_regs[8];	/* R8_fiq - R14_fiq, SPSR_fiq */
+};
+
+/* Supported Processor Types */
+#define KVM_ARM_TARGET_CORTEX_A15	0
+#define KVM_ARM_TARGET_CORTEX_A7	1
+#define KVM_ARM_NUM_TARGETS		2
+
+/* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */
+#define KVM_ARM_DEVICE_TYPE_SHIFT	0
+#define KVM_ARM_DEVICE_TYPE_MASK	(0xffff << KVM_ARM_DEVICE_TYPE_SHIFT)
+#define KVM_ARM_DEVICE_ID_SHIFT		16
+#define KVM_ARM_DEVICE_ID_MASK		(0xffff << KVM_ARM_DEVICE_ID_SHIFT)
+
+/* Supported device IDs */
+#define KVM_ARM_DEVICE_VGIC_V2		0
+
+/* Supported VGIC address types  */
+#define KVM_VGIC_V2_ADDR_TYPE_DIST	0
+#define KVM_VGIC_V2_ADDR_TYPE_CPU	1
+
+#define KVM_VGIC_V2_DIST_SIZE		0x1000
+#define KVM_VGIC_V2_CPU_SIZE		0x2000
+
+#define KVM_ARM_VCPU_POWER_OFF		0 /* CPU is started in OFF state */
+#define KVM_ARM_VCPU_PSCI_0_2		1 /* CPU uses PSCI v0.2 */
+
+struct kvm_vcpu_init {
+	__u32 target;
+	__u32 features[7];
+};
+
+struct kvm_sregs {
+};
+
+struct kvm_fpu {
+};
+
+struct kvm_guest_debug_arch {
+};
+
+struct kvm_debug_exit_arch {
+};
+
+struct kvm_sync_regs {
+};
+
+struct kvm_arch_memory_slot {
+};
+
+/* If you need to interpret the index values, here is the key: */
+#define KVM_REG_ARM_COPROC_MASK		0x000000000FFF0000
+#define KVM_REG_ARM_COPROC_SHIFT	16
+#define KVM_REG_ARM_32_OPC2_MASK	0x0000000000000007
+#define KVM_REG_ARM_32_OPC2_SHIFT	0
+#define KVM_REG_ARM_OPC1_MASK		0x0000000000000078
+#define KVM_REG_ARM_OPC1_SHIFT		3
+#define KVM_REG_ARM_CRM_MASK		0x0000000000000780
+#define KVM_REG_ARM_CRM_SHIFT		7
+#define KVM_REG_ARM_32_CRN_MASK		0x0000000000007800
+#define KVM_REG_ARM_32_CRN_SHIFT	11
+
+#define ARM_CP15_REG_SHIFT_MASK(x,n) \
+	(((x) << KVM_REG_ARM_ ## n ## _SHIFT) & KVM_REG_ARM_ ## n ## _MASK)
+
+#define __ARM_CP15_REG(op1,crn,crm,op2) \
+	(KVM_REG_ARM | (15 << KVM_REG_ARM_COPROC_SHIFT) | \
+	ARM_CP15_REG_SHIFT_MASK(op1, OPC1) | \
+	ARM_CP15_REG_SHIFT_MASK(crn, 32_CRN) | \
+	ARM_CP15_REG_SHIFT_MASK(crm, CRM) | \
+	ARM_CP15_REG_SHIFT_MASK(op2, 32_OPC2))
+
+#define ARM_CP15_REG32(...) (__ARM_CP15_REG(__VA_ARGS__) | KVM_REG_SIZE_U32)
+
+#define __ARM_CP15_REG64(op1,crm) \
+	(__ARM_CP15_REG(op1, 0, crm, 0) | KVM_REG_SIZE_U64)
+#define ARM_CP15_REG64(...) __ARM_CP15_REG64(__VA_ARGS__)
+
+#define KVM_REG_ARM_TIMER_CTL		ARM_CP15_REG32(0, 14, 3, 1)
+#define KVM_REG_ARM_TIMER_CNT		ARM_CP15_REG64(1, 14)
+#define KVM_REG_ARM_TIMER_CVAL		ARM_CP15_REG64(3, 14)
+
+/* Normal registers are mapped as coprocessor 16. */
+#define KVM_REG_ARM_CORE		(0x0010 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_CORE_REG(name)	(offsetof(struct kvm_regs, name) / 4)
+
+/* Some registers need more space to represent values. */
+#define KVM_REG_ARM_DEMUX		(0x0011 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_DEMUX_ID_MASK	0x000000000000FF00
+#define KVM_REG_ARM_DEMUX_ID_SHIFT	8
+#define KVM_REG_ARM_DEMUX_ID_CCSIDR	(0x00 << KVM_REG_ARM_DEMUX_ID_SHIFT)
+#define KVM_REG_ARM_DEMUX_VAL_MASK	0x00000000000000FF
+#define KVM_REG_ARM_DEMUX_VAL_SHIFT	0
+
+/* VFP registers: we could overload CP10 like ARM does, but that's ugly. */
+#define KVM_REG_ARM_VFP			(0x0012 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_VFP_MASK		0x000000000000FFFF
+#define KVM_REG_ARM_VFP_BASE_REG	0x0
+#define KVM_REG_ARM_VFP_FPSID		0x1000
+#define KVM_REG_ARM_VFP_FPSCR		0x1001
+#define KVM_REG_ARM_VFP_MVFR1		0x1006
+#define KVM_REG_ARM_VFP_MVFR0		0x1007
+#define KVM_REG_ARM_VFP_FPEXC		0x1008
+#define KVM_REG_ARM_VFP_FPINST		0x1009
+#define KVM_REG_ARM_VFP_FPINST2		0x100A
+
+/* Device Control API: ARM VGIC */
+#define KVM_DEV_ARM_VGIC_GRP_ADDR	0
+#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS	1
+#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS	2
+#define   KVM_DEV_ARM_VGIC_CPUID_SHIFT	32
+#define   KVM_DEV_ARM_VGIC_CPUID_MASK	(0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT)
+#define   KVM_DEV_ARM_VGIC_OFFSET_SHIFT	0
+#define   KVM_DEV_ARM_VGIC_OFFSET_MASK	(0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT)
+#define KVM_DEV_ARM_VGIC_GRP_NR_IRQS	3
+#define KVM_DEV_ARM_VGIC_GRP_CTRL       4
+#define   KVM_DEV_ARM_VGIC_CTRL_INIT    0
+
+/* KVM_IRQ_LINE irq field index values */
+#define KVM_ARM_IRQ_TYPE_SHIFT		24
+#define KVM_ARM_IRQ_TYPE_MASK		0xff
+#define KVM_ARM_IRQ_VCPU_SHIFT		16
+#define KVM_ARM_IRQ_VCPU_MASK		0xff
+#define KVM_ARM_IRQ_NUM_SHIFT		0
+#define KVM_ARM_IRQ_NUM_MASK		0xffff
+
+/* irq_type field */
+#define KVM_ARM_IRQ_TYPE_CPU		0
+#define KVM_ARM_IRQ_TYPE_SPI		1
+#define KVM_ARM_IRQ_TYPE_PPI		2
+
+/* out-of-kernel GIC cpu interrupt injection irq_number field */
+#define KVM_ARM_IRQ_CPU_IRQ		0
+#define KVM_ARM_IRQ_CPU_FIQ		1
+
+/*
+ * This used to hold the highest supported SPI, but it is now obsolete
+ * and only here to provide source code level compatibility with older
+ * userland. The highest SPI number can be set via KVM_DEV_ARM_VGIC_GRP_NR_IRQS.
+ */
+#ifndef __KERNEL__
+#define KVM_ARM_IRQ_GIC_MAX		127
+#endif
+
+/* One single KVM irqchip, ie. the VGIC */
+#define KVM_NR_IRQCHIPS          1
+
+/* PSCI interface */
+#define KVM_PSCI_FN_BASE		0x95c1ba5e
+#define KVM_PSCI_FN(n)			(KVM_PSCI_FN_BASE + (n))
+
+#define KVM_PSCI_FN_CPU_SUSPEND		KVM_PSCI_FN(0)
+#define KVM_PSCI_FN_CPU_OFF		KVM_PSCI_FN(1)
+#define KVM_PSCI_FN_CPU_ON		KVM_PSCI_FN(2)
+#define KVM_PSCI_FN_MIGRATE		KVM_PSCI_FN(3)
+
+#define KVM_PSCI_RET_SUCCESS		PSCI_RET_SUCCESS
+#define KVM_PSCI_RET_NI			PSCI_RET_NOT_SUPPORTED
+#define KVM_PSCI_RET_INVAL		PSCI_RET_INVALID_PARAMS
+#define KVM_PSCI_RET_DENIED		PSCI_RET_DENIED
+
+#endif /* __ARM_KVM_H__ */