diff options
| author | Connor McAdams <conmanx360@gmail.com> | 2020-12-11 17:55:03 -0500 |
|---|---|---|
| committer | Takashi Iwai <tiwai@suse.de> | 2020-12-12 11:09:52 +0100 |
| commit | d84489e374f5b9b3ab424a5169e68e06a4329524 (patch) | |
| tree | 02976126718c57018daaf6f96248ceee0dff7e98 /sound | |
| parent | c1d8aeed83d9e4b98a31f0c669102d8f2f1e4901 (diff) | |
| download | linux-d84489e374f5b9b3ab424a5169e68e06a4329524.tar.bz2 | |
ALSA: hda/ca0132 - Add ZxR surround DAC setup.
Add pre-dsp download initialization for the DAC's used in the surround
sound configuration. Fixes issues of no audio on surround channels.
Fixes: 2e492b8ee5da8 ("ALSA: hda/ca0132 - Add ZxR init commands")
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201211225504.4508-2-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound')
| -rw-r--r-- | sound/pci/hda/patch_ca0132.c | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 9b6b7601a881..7e62aed172a9 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -9187,6 +9187,44 @@ static void r3di_pre_dsp_setup(struct hda_codec *codec) } /* + * The ZxR seems to use alternative DAC's for the surround channels, which + * require PLL PMU setup for the clock rate, I'm guessing. Without setting + * this up, we get no audio out of the surround jacks. + */ +static void zxr_pre_dsp_setup(struct hda_codec *codec) +{ + static const unsigned int addr[] = { 0x43, 0x40, 0x41, 0x42, 0x45 }; + static const unsigned int data[] = { 0x08, 0x0c, 0x0b, 0x07, 0x0d }; + unsigned int i; + + chipio_write(codec, 0x189000, 0x0001f100); + msleep(50); + chipio_write(codec, 0x18900c, 0x0001f100); + msleep(50); + + /* + * This writes a RET instruction at the entry point of the function at + * 0xfa92 in exram. This function seems to have something to do with + * ASI. Might be some way to prevent the card from reconfiguring the + * ASI stuff itself. + */ + chipio_8051_write_exram(codec, 0xfa92, 0x22); + + chipio_8051_write_pll_pmu(codec, 0x51, 0x98); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x725, 0x82); + chipio_set_control_param(codec, CONTROL_PARAM_ASI, 3); + + chipio_write(codec, 0x18902c, 0x00000000); + msleep(50); + chipio_write(codec, 0x18902c, 0x00000003); + msleep(50); + + for (i = 0; i < ARRAY_SIZE(addr); i++) + chipio_8051_write_pll_pmu(codec, addr[i], data[i]); +} + +/* * These are sent before the DSP is downloaded. Not sure * what they do, or if they're necessary. Could possibly * be removed. Figure they're better to leave in. @@ -9447,8 +9485,10 @@ static void ca0132_alt_init(struct hda_codec *codec) ca0113_mmio_command_set(codec, 0x30, 0x32, 0x3f); break; case QUIRK_ZXR: + chipio_8051_write_pll_pmu(codec, 0x49, 0x88); snd_hda_sequence_write(codec, spec->chip_init_verbs); snd_hda_sequence_write(codec, spec->desktop_init_verbs); + zxr_pre_dsp_setup(codec); break; default: break; |