diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2021-02-15 15:21:15 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2021-03-10 12:48:31 +0000 |
| commit | d917b5dde660b11abd757bf99a29353c36880b2c (patch) | |
| tree | b7707450c92fba45ace5887b495dcd9126ff8f36 /sound/soc/codecs/rt5670.c | |
| parent | 87263968516fb9507d6215d53f44052627fae8d8 (diff) | |
| download | linux-d917b5dde660b11abd757bf99a29353c36880b2c.tar.bz2 | |
ASoC: rt5670: Remove 'OUT Channel Switch' control
The "OUT Channel Switch" control is a left over from code copied from
thr rt5640 codec driver.
With the rt5640 codec driver the output volume controls have 2 pairs of
mute bits:
bit 7, 15: Mute Control for Spk/Headphone/Line Output Port
bit 6, 14: Mute Control for Spk/Headphone/Line Volume Channel
Bits 7 and 15 are normal mute bits on the rt5670/5672 which are
controlled by 2 dapm widgets:
SND_SOC_DAPM_SWITCH("LOUT L Playback", SND_SOC_NOPM, 0, 0,
&lout_l_enable_control),
SND_SOC_DAPM_SWITCH("LOUT R Playback", SND_SOC_NOPM, 0, 0,
&lout_r_enable_control),
But on the 5670/5672 bit 6 is always reserved, where as bit 14 is
"LOUT Differential Mode" on the 5670 and also reserved on the 5672.
So the "OUT Channel Switch" control which is controlling bits 6+14
of the "LINE Output Control" register is bogus -> remove it.
This should not cause any issues for userspace. AFAICT the rt567x codecs
are only used on x86/ACPI devices and the UCM profiles used there do not
use the "OUT Channel Switch" control.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215142118.308516-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'sound/soc/codecs/rt5670.c')
| -rw-r--r-- | sound/soc/codecs/rt5670.c | 2 |
1 files changed, 0 insertions, 2 deletions
diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index c29317ea5df2..2e799e21dbda 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -637,8 +637,6 @@ static const struct snd_kcontrol_new rt5670_snd_controls[] = { RT5670_L_VOL_SFT, RT5670_R_VOL_SFT, 39, 1, out_vol_tlv), /* OUTPUT Control */ - SOC_DOUBLE("OUT Channel Switch", RT5670_LOUT1, - RT5670_VOL_L_SFT, RT5670_VOL_R_SFT, 1, 1), SOC_DOUBLE_TLV("OUT Playback Volume", RT5670_LOUT1, RT5670_L_VOL_SFT, RT5670_R_VOL_SFT, 39, 1, out_vol_tlv), /* DAC Digital Volume */ |