summaryrefslogtreecommitdiffstats
path: root/net/wireless/util.c
diff options
context:
space:
mode:
authorJohannes Berg <johannes@sipsolutions.net>2009-11-19 00:56:30 +0100
committerJohn W. Linville <linville@tuxdriver.com>2009-11-19 11:08:54 -0500
commitad4bb6f8883a13bb0f65b194dae36c62a02ac779 (patch)
treeb395936203ac891b9a537c26b4602f727c4387d0 /net/wireless/util.c
parent9bc383de37090ba7ca3ff32a12c9d809dc5867f0 (diff)
downloadlinux-ad4bb6f8883a13bb0f65b194dae36c62a02ac779.tar.bz2
cfg80211: disallow bridging managed/adhoc interfaces
A number of people have tried to add a wireless interface (in managed mode) to a bridge and then complained that it doesn't work. It cannot work, however, because in 802.11 networks all packets need to be acknowledged and as such need to be sent to the right address. Promiscuous doesn't help here. The wireless address format used for these links has only space for three addresses, the * transmitter, which must be equal to the sender (origin) * receiver (on the wireless medium), which is the AP in the case of managed mode * the recipient (destination), which is on the APs local network segment In an IBSS, it is similar, but the receiver and recipient must match and the third address is used as the BSSID. To avoid such mistakes in the future, disallow adding a wireless interface to a bridge. Felix has recently added a four-address mode to the AP and client side that can be used (after negotiating that it is possible, which must happen out-of-band by setting up both sides) for bridging, so allow that case. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'net/wireless/util.c')
-rw-r--r--net/wireless/util.c31
1 files changed, 31 insertions, 0 deletions
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 17a7a4cfc617..59361fdcb5d0 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -658,6 +658,11 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
!(rdev->wiphy.interface_modes & (1 << ntype)))
return -EOPNOTSUPP;
+ /* if it's part of a bridge, reject changing type to station/ibss */
+ if (dev->br_port && (ntype == NL80211_IFTYPE_ADHOC ||
+ ntype == NL80211_IFTYPE_STATION))
+ return -EBUSY;
+
if (ntype != otype) {
dev->ieee80211_ptr->use_4addr = false;
@@ -687,5 +692,31 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
if (!err && params && params->use_4addr != -1)
dev->ieee80211_ptr->use_4addr = params->use_4addr;
+ if (!err) {
+ dev->priv_flags &= ~IFF_DONT_BRIDGE;
+ switch (ntype) {
+ case NL80211_IFTYPE_STATION:
+ if (dev->ieee80211_ptr->use_4addr)
+ break;
+ /* fall through */
+ case NL80211_IFTYPE_ADHOC:
+ dev->priv_flags |= IFF_DONT_BRIDGE;
+ break;
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_WDS:
+ case NL80211_IFTYPE_MESH_POINT:
+ /* bridging OK */
+ break;
+ case NL80211_IFTYPE_MONITOR:
+ /* monitor can't bridge anyway */
+ break;
+ case NL80211_IFTYPE_UNSPECIFIED:
+ case __NL80211_IFTYPE_AFTER_LAST:
+ /* not happening */
+ break;
+ }
+ }
+
return err;
}