summaryrefslogtreecommitdiffstats
path: root/net/mpls
diff options
context:
space:
mode:
authorRobert Shearman <rshearma@brocade.com>2015-12-10 19:30:50 +0000
committerDavid S. Miller <davem@davemloft.net>2015-12-12 00:43:44 -0500
commiteb7809f093b109a7db7454dc775423675d075653 (patch)
treeca897a9f8aaab617628ab70e887a02b8432e42bf /net/mpls
parent72dcac96c7f8320caf80dfaa559331174060a1ce (diff)
downloadlinux-eb7809f093b109a7db7454dc775423675d075653.tar.bz2
mpls: fix out-of-bounds access when via address not specified
When a via address isn't specified, the via table is left initialised to 0 (NEIGH_ARP_TABLE), and the via address length also left initialised to 0. This results in a via address array of length 0 being allocated (contiguous with route and nexthop array), meaning that when a packet is sent using neigh_xmit the neighbour lookup and creation will cause an out-of-bounds access when accessing the 4 bytes of the IPv4 address it assumes it has been given a pointer to. This could be fixed by allocating the 4 bytes of via address necessary and leaving it as all zeroes. However, it seems wrong to me to use an ipv4 nexthop (including possibly ARPing for 0.0.0.0) when the user didn't specify to do so. Instead, set the via address table to NEIGH_NR_TABLES to signify it hasn't been specified and use this at forwarding time to signify a neigh_xmit using an L2 address consisting of the device address. This mechanism is the same as that used for both ARP and ND for loopback interfaces and those flagged as no-arp, which are all we can really support in this case. Fixes: cf4b24f0024f ("mpls: reduce memory usage of routes") Signed-off-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/mpls')
-rw-r--r--net/mpls/af_mpls.c17
1 files changed, 12 insertions, 5 deletions
diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c
index ac1c116abaac..7bfc85f52ca8 100644
--- a/net/mpls/af_mpls.c
+++ b/net/mpls/af_mpls.c
@@ -27,6 +27,8 @@
*/
#define MAX_MP_SELECT_LABELS 4
+#define MPLS_NEIGH_TABLE_UNSPEC (NEIGH_LINK_TABLE + 1)
+
static int zero = 0;
static int label_limit = (1 << 20) - 1;
@@ -317,7 +319,13 @@ static int mpls_forward(struct sk_buff *skb, struct net_device *dev,
}
}
- err = neigh_xmit(nh->nh_via_table, out_dev, mpls_nh_via(rt, nh), skb);
+ /* If via wasn't specified then send out using device address */
+ if (nh->nh_via_table == MPLS_NEIGH_TABLE_UNSPEC)
+ err = neigh_xmit(NEIGH_LINK_TABLE, out_dev,
+ out_dev->dev_addr, skb);
+ else
+ err = neigh_xmit(nh->nh_via_table, out_dev,
+ mpls_nh_via(rt, nh), skb);
if (err)
net_dbg_ratelimited("%s: packet transmission failed: %d\n",
__func__, err);
@@ -1122,6 +1130,7 @@ static int rtm_to_route_config(struct sk_buff *skb, struct nlmsghdr *nlh,
cfg->rc_label = LABEL_NOT_SPECIFIED;
cfg->rc_protocol = rtm->rtm_protocol;
+ cfg->rc_via_table = MPLS_NEIGH_TABLE_UNSPEC;
cfg->rc_nlflags = nlh->nlmsg_flags;
cfg->rc_nlinfo.portid = NETLINK_CB(skb).portid;
cfg->rc_nlinfo.nlh = nlh;
@@ -1235,8 +1244,7 @@ static int mpls_dump_route(struct sk_buff *skb, u32 portid, u32 seq, int event,
nla_put_labels(skb, RTA_NEWDST, nh->nh_labels,
nh->nh_label))
goto nla_put_failure;
- if ((nh->nh_via_table != NEIGH_ARP_TABLE ||
- nh->nh_via_alen != 0) &&
+ if (nh->nh_via_table != MPLS_NEIGH_TABLE_UNSPEC &&
nla_put_via(skb, nh->nh_via_table, mpls_nh_via(rt, nh),
nh->nh_via_alen))
goto nla_put_failure;
@@ -1325,8 +1333,7 @@ static inline size_t lfib_nlmsg_size(struct mpls_route *rt)
if (nh->nh_dev)
payload += nla_total_size(4); /* RTA_OIF */
- if (nh->nh_via_table != NEIGH_ARP_TABLE ||
- nh->nh_via_alen != 0) /* RTA_VIA */
+ if (nh->nh_via_table != MPLS_NEIGH_TABLE_UNSPEC) /* RTA_VIA */
payload += nla_total_size(2 + nh->nh_via_alen);
if (nh->nh_labels) /* RTA_NEWDST */
payload += nla_total_size(nh->nh_labels * 4);