Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "The sprinkling of SPI drivers is because we added a new one and Mark
  sent us a SPI driver interface conversion pull request.

  Core
  ----

   - Introduce XDP multi-buffer support, allowing the use of XDP with
     jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

   - Speed up netns dismantling (5x) and lower the memory cost a little.
     Remove unnecessary per-netns sockets. Scope some lists to a netns.
     Cut down RCU syncing. Use batch methods. Allow netdev registration
     to complete out of order.

   - Support distinguishing timestamp types (ingress vs egress) and
     maintaining them across packet scrubbing points (e.g. redirect).

   - Continue the work of annotating packet drop reasons throughout the
     stack.

   - Switch netdev error counters from an atomic to dynamically
     allocated per-CPU counters.

   - Rework a few preempt_disable(), local_irq_save() and busy waiting
     sections problematic on PREEMPT_RT.

   - Extend the ref_tracker to allow catching use-after-free bugs.

  BPF
  ---

   - Introduce "packing allocator" for BPF JIT images. JITed code is
     marked read only, and used to be allocated at page granularity.
     Custom allocator allows for more efficient memory use, lower iTLB
     pressure and prevents identity mapping huge pages from getting
     split.

   - Make use of BTF type annotations (e.g. __user, __percpu) to enforce
     the correct probe read access method, add appropriate helpers.

   - Convert the BPF preload to use light skeleton and drop the
     user-mode-driver dependency.

   - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
     its use as a packet generator.

   - Allow local storage memory to be allocated with GFP_KERNEL if
     called from a hook allowed to sleep.

   - Introduce fprobe (multi kprobe) to speed up mass attachment (arch
     bits to come later).

   - Add unstable conntrack lookup helpers for BPF by using the BPF
     kfunc infra.

   - Allow cgroup BPF progs to return custom errors to user space.

   - Add support for AF_UNIX iterator batching.

   - Allow iterator programs to use sleepable helpers.

   - Support JIT of add, and, or, xor and xchg atomic ops on arm64.

   - Add BTFGen support to bpftool which allows to use CO-RE in kernels
     without BTF info.

   - Large number of libbpf API improvements, cleanups and deprecations.

  Protocols
  ---------

   - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

   - Adjust TSO packet sizes based on min_rtt, allowing very low latency
     links (data centers) to always send full-sized TSO super-frames.

   - Make IPv6 flow label changes (AKA hash rethink) more configurable,
     via sysctl and setsockopt. Distinguish between server and client
     behavior.

   - VxLAN support to "collect metadata" devices to terminate only
     configured VNIs. This is similar to VLAN filtering in the bridge.

   - Support inserting IPv6 IOAM information to a fraction of frames.

   - Add protocol attribute to IP addresses to allow identifying where
     given address comes from (kernel-generated, DHCP etc.)

   - Support setting socket and IPv6 options via cmsg on ping6 sockets.

   - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
     Define dscp_t and stop taking ECN bits into account in fib-rules.

   - Add support for locked bridge ports (for 802.1X).

   - tun: support NAPI for packets received from batched XDP buffs,
     doubling the performance in some scenarios.

   - IPv6 extension header handling in Open vSwitch.

   - Support IPv6 control message load balancing in bonding, prevent
     neighbor solicitation and advertisement from using the wrong port.
     Support NS/NA monitor selection similar to existing ARP monitor.

   - SMC
      - improve performance with TCP_CORK and sendfile()
      - support auto-corking
      - support TCP_NODELAY

   - MCTP (Management Component Transport Protocol)
      - add user space tag control interface
      - I2C binding driver (as specified by DMTF DSP0237)

   - Multi-BSSID beacon handling in AP mode for WiFi.

   - Bluetooth:
      - handle MSFT Monitor Device Event
      - add MGMT Adv Monitor Device Found/Lost events

   - Multi-Path TCP:
      - add support for the SO_SNDTIMEO socket option
      - lots of selftest cleanups and improvements

   - Increase the max PDU size in CAN ISOTP to 64 kB.

  Driver API
  ----------

   - Add HW counters for SW netdevs, a mechanism for devices which
     offload packet forwarding to report packet statistics back to
     software interfaces such as tunnels.

   - Select the default NIC queue count as a fraction of number of
     physical CPU cores, instead of hard-coding to 8.

   - Expose devlink instance locks to drivers. Allow device layer of
     drivers to use that lock directly instead of creating their own
     which always runs into ordering issues in devlink callbacks.

   - Add header/data split indication to guide user space enabling of
     TCP zero-copy Rx.

   - Allow configuring completion queue event size.

   - Refactor page_pool to enable fragmenting after allocation.

   - Add allocation and page reuse statistics to page_pool.

   - Improve Multiple Spanning Trees support in the bridge to allow
     reuse of topologies across VLANs, saving HW resources in switches.

   - DSA (Distributed Switch Architecture):
      - replay and offload of host VLAN entries
      - offload of static and local FDB entries on LAG interfaces
      - FDB isolation and unicast filtering

  New hardware / drivers
  ----------------------

   - Ethernet:
      - LAN937x T1 PHYs
      - Davicom DM9051 SPI NIC driver
      - Realtek RTL8367S, RTL8367RB-VB switch and MDIO
      - Microchip ksz8563 switches
      - Netronome NFP3800 SmartNICs
      - Fungible SmartNICs
      - MediaTek MT8195 switches

   - WiFi:
      - mt76: MediaTek mt7916
      - mt76: MediaTek mt7921u USB adapters
      - brcmfmac: Broadcom BCM43454/6

   - Mobile:
      - iosm: Intel M.2 7360 WWAN card

  Drivers
  -------

   - Convert many drivers to the new phylink API built for split PCS
     designs but also simplifying other cases.

   - Intel Ethernet NICs:
      - add TTY for GNSS module for E810T device
      - improve AF_XDP performance
      - GTP-C and GTP-U filter offload
      - QinQ VLAN support

   - Mellanox Ethernet NICs (mlx5):
      - support xdp->data_meta
      - multi-buffer XDP
      - offload tc push_eth and pop_eth actions

   - Netronome Ethernet NICs (nfp):
      - flow-independent tc action hardware offload (police / meter)
      - AF_XDP

   - Other Ethernet NICs:
      - at803x: fiber and SFP support
      - xgmac: mdio: preamble suppression and custom MDC frequencies
      - r8169: enable ASPM L1.2 if system vendor flags it as safe
      - macb/gem: ZynqMP SGMII
      - hns3: add TX push mode
      - dpaa2-eth: software TSO
      - lan743x: multi-queue, mdio, SGMII, PTP
      - axienet: NAPI and GRO support

   - Mellanox Ethernet switches (mlxsw):
      - source and dest IP address rewrites
      - RJ45 ports

   - Marvell Ethernet switches (prestera):
      - basic routing offload
      - multi-chain TC ACL offload

   - NXP embedded Ethernet switches (ocelot & felix):
      - PTP over UDP with the ocelot-8021q DSA tagging protocol
      - basic QoS classification on Felix DSA switch using dcbnl
      - port mirroring for ocelot switches

   - Microchip high-speed industrial Ethernet (sparx5):
      - offloading of bridge port flooding flags
      - PTP Hardware Clock

   - Other embedded switches:
      - lan966x: PTP Hardward Clock
      - qca8k: mdio read/write operations via crafted Ethernet packets

   - Qualcomm 802.11ax WiFi (ath11k):
      - add LDPC FEC type and 802.11ax High Efficiency data in radiotap
      - enable RX PPDU stats in monitor co-exist mode

   - Intel WiFi (iwlwifi):
      - UHB TAS enablement via BIOS
      - band disablement via BIOS
      - channel switch offload
      - 32 Rx AMPDU sessions in newer devices

   - MediaTek WiFi (mt76):
      - background radar detection
      - thermal management improvements on mt7915
      - SAR support for more mt76 platforms
      - MBSSID and 6 GHz band on mt7915

   - RealTek WiFi:
      - rtw89: AP mode
      - rtw89: 160 MHz channels and 6 GHz band
      - rtw89: hardware scan

   - Bluetooth:
      - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

   - Microchip CAN (mcp251xfd):
      - multiple RX-FIFOs and runtime configurable RX/TX rings
      - internal PLL, runtime PM handling simplification
      - improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
  llc: fix netdevice reference leaks in llc_ui_bind()
  drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
  ice: don't allow to run ice_send_event_to_aux() in atomic ctx
  ice: fix 'scheduling while atomic' on aux critical err interrupt
  net/sched: fix incorrect vlan_push_eth dest field
  net: bridge: mst: Restrict info size queries to bridge ports
  net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
  drivers: net: xgene: Fix regression in CRC stripping
  net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
  net: dsa: fix missing host-filtered multicast addresses
  net/mlx5e: Fix build warning, detected write beyond size of field
  iwlwifi: mvm: Don't fail if PPAG isn't supported
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  netdevice: add missing dm_private kdoc
  net: bridge: mst: prevent NULL deref in br_mst_info_size()
  selftests: forwarding: Use same VRF for port and VLAN upper
  ...

1 files changed, 118 insertions, 205 deletions

diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c
index 27712a81c967..a786569203f0 100644
--- a/net/dsa/tag_8021q.c
+++ b/net/dsa/tag_8021q.c
@@ -16,15 +16,11 @@
  *
  * | 11  | 10  |  9  |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  |  0  |
  * +-----------+-----+-----------------+-----------+-----------------------+
- * |    DIR    | VBID|    SWITCH_ID    |   VBID    |          PORT         |
+ * |    RSV    | VBID|    SWITCH_ID    |   VBID    |          PORT         |
  * +-----------+-----+-----------------+-----------+-----------------------+
  *
- * DIR - VID[11:10]:
- *	Direction flags.
- *	* 1 (0b01) for RX VLAN,
- *	* 2 (0b10) for TX VLAN.
- *	These values make the special VIDs of 0, 1 and 4095 to be left
- *	unused by this coding scheme.
+ * RSV - VID[11:10]:
+ *	Reserved. Must be set to 3 (0b11).
  *
  * SWITCH_ID - VID[8:6]:
  *	Index of switch within DSA tree. Must be between 0 and 7.
@@ -32,18 +28,17 @@
  * VBID - { VID[9], VID[5:4] }:
  *	Virtual bridge ID. If between 1 and 7, packet targets the broadcast
  *	domain of a bridge. If transmitted as zero, packet targets a single
- *	port. Field only valid on transmit, must be ignored on receive.
+ *	port.
  *
  * PORT - VID[3:0]:
  *	Index of switch port. Must be between 0 and 15.
  */
 
-#define DSA_8021Q_DIR_SHIFT		10
-#define DSA_8021Q_DIR_MASK		GENMASK(11, 10)
-#define DSA_8021Q_DIR(x)		(((x) << DSA_8021Q_DIR_SHIFT) & \
-						 DSA_8021Q_DIR_MASK)
-#define DSA_8021Q_DIR_RX		DSA_8021Q_DIR(1)
-#define DSA_8021Q_DIR_TX		DSA_8021Q_DIR(2)
+#define DSA_8021Q_RSV_VAL		3
+#define DSA_8021Q_RSV_SHIFT		10
+#define DSA_8021Q_RSV_MASK		GENMASK(11, 10)
+#define DSA_8021Q_RSV			((DSA_8021Q_RSV_VAL << DSA_8021Q_RSV_SHIFT) & \
+							       DSA_8021Q_RSV_MASK)
 
 #define DSA_8021Q_SWITCH_ID_SHIFT	6
 #define DSA_8021Q_SWITCH_ID_MASK	GENMASK(8, 6)
@@ -67,34 +62,24 @@
 #define DSA_8021Q_PORT(x)		(((x) << DSA_8021Q_PORT_SHIFT) & \
 						 DSA_8021Q_PORT_MASK)
 
-u16 dsa_8021q_bridge_tx_fwd_offload_vid(unsigned int bridge_num)
+u16 dsa_tag_8021q_bridge_vid(unsigned int bridge_num)
 {
 	/* The VBID value of 0 is reserved for precise TX, but it is also
 	 * reserved/invalid for the bridge_num, so all is well.
 	 */
-	return DSA_8021Q_DIR_TX | DSA_8021Q_VBID(bridge_num);
+	return DSA_8021Q_RSV | DSA_8021Q_VBID(bridge_num);
 }
-EXPORT_SYMBOL_GPL(dsa_8021q_bridge_tx_fwd_offload_vid);
-
-/* Returns the VID to be inserted into the frame from xmit for switch steering
- * instructions on egress. Encodes switch ID and port ID.
- */
-u16 dsa_tag_8021q_tx_vid(const struct dsa_port *dp)
-{
-	return DSA_8021Q_DIR_TX | DSA_8021Q_SWITCH_ID(dp->ds->index) |
-	       DSA_8021Q_PORT(dp->index);
-}
-EXPORT_SYMBOL_GPL(dsa_tag_8021q_tx_vid);
+EXPORT_SYMBOL_GPL(dsa_tag_8021q_bridge_vid);
 
 /* Returns the VID that will be installed as pvid for this switch port, sent as
  * tagged egress towards the CPU port and decoded by the rcv function.
  */
-u16 dsa_tag_8021q_rx_vid(const struct dsa_port *dp)
+u16 dsa_tag_8021q_standalone_vid(const struct dsa_port *dp)
 {
-	return DSA_8021Q_DIR_RX | DSA_8021Q_SWITCH_ID(dp->ds->index) |
+	return DSA_8021Q_RSV | DSA_8021Q_SWITCH_ID(dp->ds->index) |
 	       DSA_8021Q_PORT(dp->index);
 }
-EXPORT_SYMBOL_GPL(dsa_tag_8021q_rx_vid);
+EXPORT_SYMBOL_GPL(dsa_tag_8021q_standalone_vid);
 
 /* Returns the decoded switch ID from the RX VID. */
 int dsa_8021q_rx_switch_id(u16 vid)
@@ -110,21 +95,20 @@ int dsa_8021q_rx_source_port(u16 vid)
 }
 EXPORT_SYMBOL_GPL(dsa_8021q_rx_source_port);
 
-bool vid_is_dsa_8021q_rxvlan(u16 vid)
+/* Returns the decoded VBID from the RX VID. */
+static int dsa_tag_8021q_rx_vbid(u16 vid)
 {
-	return (vid & DSA_8021Q_DIR_MASK) == DSA_8021Q_DIR_RX;
-}
-EXPORT_SYMBOL_GPL(vid_is_dsa_8021q_rxvlan);
+	u16 vbid_hi = (vid & DSA_8021Q_VBID_HI_MASK) >> DSA_8021Q_VBID_HI_SHIFT;
+	u16 vbid_lo = (vid & DSA_8021Q_VBID_LO_MASK) >> DSA_8021Q_VBID_LO_SHIFT;
 
-bool vid_is_dsa_8021q_txvlan(u16 vid)
-{
-	return (vid & DSA_8021Q_DIR_MASK) == DSA_8021Q_DIR_TX;
+	return (vbid_hi << 2) | vbid_lo;
 }
-EXPORT_SYMBOL_GPL(vid_is_dsa_8021q_txvlan);
 
 bool vid_is_dsa_8021q(u16 vid)
 {
-	return vid_is_dsa_8021q_rxvlan(vid) || vid_is_dsa_8021q_txvlan(vid);
+	u16 rsv = (vid & DSA_8021Q_RSV_MASK) >> DSA_8021Q_RSV_SHIFT;
+
+	return rsv == DSA_8021Q_RSV_VAL;
 }
 EXPORT_SYMBOL_GPL(vid_is_dsa_8021q);
 
@@ -242,12 +226,8 @@ int dsa_switch_tag_8021q_vlan_add(struct dsa_switch *ds,
 			u16 flags = 0;
 
 			if (dsa_port_is_user(dp))
-				flags |= BRIDGE_VLAN_INFO_UNTAGGED;
-
-			if (vid_is_dsa_8021q_rxvlan(info->vid) &&
-			    dsa_8021q_rx_switch_id(info->vid) == ds->index &&
-			    dsa_8021q_rx_source_port(info->vid) == dp->index)
-				flags |= BRIDGE_VLAN_INFO_PVID;
+				flags |= BRIDGE_VLAN_INFO_UNTAGGED |
+					 BRIDGE_VLAN_INFO_PVID;
 
 			err = dsa_port_do_tag_8021q_vlan_add(dp, info->vid,
 							     flags);
@@ -279,162 +259,78 @@ int dsa_switch_tag_8021q_vlan_del(struct dsa_switch *ds,
 	return 0;
 }
 
-/* RX VLAN tagging (left) and TX VLAN tagging (right) setup shown for a single
- * front-panel switch port (here swp0).
+/* There are 2 ways of offloading tag_8021q VLANs.
  *
- * Port identification through VLAN (802.1Q) tags has different requirements
- * for it to work effectively:
- *  - On RX (ingress from network): each front-panel port must have a pvid
- *    that uniquely identifies it, and the egress of this pvid must be tagged
- *    towards the CPU port, so that software can recover the source port based
- *    on the VID in the frame. But this would only work for standalone ports;
- *    if bridged, this VLAN setup would break autonomous forwarding and would
- *    force all switched traffic to pass through the CPU. So we must also make
- *    the other front-panel ports members of this VID we're adding, albeit
- *    we're not making it their PVID (they'll still have their own).
- *  - On TX (ingress from CPU and towards network) we are faced with a problem.
- *    If we were to tag traffic (from within DSA) with the port's pvid, all
- *    would be well, assuming the switch ports were standalone. Frames would
- *    have no choice but to be directed towards the correct front-panel port.
- *    But because we also want the RX VLAN to not break bridging, then
- *    inevitably that means that we have to give them a choice (of what
- *    front-panel port to go out on), and therefore we cannot steer traffic
- *    based on the RX VID. So what we do is simply install one more VID on the
- *    front-panel and CPU ports, and profit off of the fact that steering will
- *    work just by virtue of the fact that there is only one other port that's
- *    a member of the VID we're tagging the traffic with - the desired one.
+ * One is to use a hardware TCAM to push the port's standalone VLAN into the
+ * frame when forwarding it to the CPU, as an egress modification rule on the
+ * CPU port. This is preferable because it has no side effects for the
+ * autonomous forwarding path, and accomplishes tag_8021q's primary goal of
+ * identifying the source port of each packet based on VLAN ID.
  *
- * So at the end, each front-panel port will have one RX VID (also the PVID),
- * the RX VID of all other front-panel ports that are in the same bridge, and
- * one TX VID. Whereas the CPU port will have the RX and TX VIDs of all
- * front-panel ports, and on top of that, is also tagged-input and
- * tagged-output (VLAN trunk).
+ * The other is to commit the tag_8021q VLAN as a PVID to the VLAN table, and
+ * to configure the port as VLAN-unaware. This is less preferable because
+ * unique source port identification can only be done for standalone ports;
+ * under a VLAN-unaware bridge, all ports share the same tag_8021q VLAN as
+ * PVID, and under a VLAN-aware bridge, packets received by software will not
+ * have tag_8021q VLANs appended, just bridge VLANs.
  *
- *               CPU port                               CPU port
- * +-------------+-----+-------------+    +-------------+-----+-------------+
- * |  RX VID     |     |             |    |  TX VID     |     |             |
- * |  of swp0    |     |             |    |  of swp0    |     |             |
- * |             +-----+             |    |             +-----+             |
- * |                ^ T              |    |                | Tagged         |
- * |                |                |    |                | ingress        |
- * |    +-------+---+---+-------+    |    |    +-----------+                |
- * |    |       |       |       |    |    |    | Untagged                   |
- * |    |     U v     U v     U v    |    |    v egress                     |
- * | +-----+ +-----+ +-----+ +-----+ |    | +-----+ +-----+ +-----+ +-----+ |
- * | |     | |     | |     | |     | |    | |     | |     | |     | |     | |
- * | |PVID | |     | |     | |     | |    | |     | |     | |     | |     | |
- * +-+-----+-+-----+-+-----+-+-----+-+    +-+-----+-+-----+-+-----+-+-----+-+
- *   swp0    swp1    swp2    swp3           swp0    swp1    swp2    swp3
+ * For tag_8021q implementations of the second type, this method is used to
+ * replace the standalone tag_8021q VLAN of a port with the tag_8021q VLAN to
+ * be used for VLAN-unaware bridging.
  */
-static bool
-dsa_port_tag_8021q_bridge_match(struct dsa_port *dp,
-				struct dsa_notifier_bridge_info *info)
+int dsa_tag_8021q_bridge_join(struct dsa_switch *ds, int port,
+			      struct dsa_bridge bridge)
 {
-	/* Don't match on self */
-	if (dp->ds->dst->index == info->tree_index &&
-	    dp->ds->index == info->sw_index &&
-	    dp->index == info->port)
-		return false;
-
-	if (dsa_port_is_user(dp))
-		return dsa_port_offloads_bridge(dp, &info->bridge);
-
-	return false;
-}
-
-int dsa_tag_8021q_bridge_join(struct dsa_switch *ds,
-			      struct dsa_notifier_bridge_info *info)
-{
-	struct dsa_switch *targeted_ds;
-	struct dsa_port *targeted_dp;
-	struct dsa_port *dp;
-	u16 targeted_rx_vid;
+	struct dsa_port *dp = dsa_to_port(ds, port);
+	u16 standalone_vid, bridge_vid;
 	int err;
 
-	if (!ds->tag_8021q_ctx)
-		return 0;
-
-	targeted_ds = dsa_switch_find(info->tree_index, info->sw_index);
-	targeted_dp = dsa_to_port(targeted_ds, info->port);
-	targeted_rx_vid = dsa_tag_8021q_rx_vid(targeted_dp);
-
-	dsa_switch_for_each_port(dp, ds) {
-		u16 rx_vid = dsa_tag_8021q_rx_vid(dp);
-
-		if (!dsa_port_tag_8021q_bridge_match(dp, info))
-			continue;
+	/* Delete the standalone VLAN of the port and replace it with a
+	 * bridging VLAN
+	 */
+	standalone_vid = dsa_tag_8021q_standalone_vid(dp);
+	bridge_vid = dsa_tag_8021q_bridge_vid(bridge.num);
 
-		/* Install the RX VID of the targeted port in our VLAN table */
-		err = dsa_port_tag_8021q_vlan_add(dp, targeted_rx_vid, true);
-		if (err)
-			return err;
+	err = dsa_port_tag_8021q_vlan_add(dp, bridge_vid, true);
+	if (err)
+		return err;
 
-		/* Install our RX VID into the targeted port's VLAN table */
-		err = dsa_port_tag_8021q_vlan_add(targeted_dp, rx_vid, true);
-		if (err)
-			return err;
-	}
+	dsa_port_tag_8021q_vlan_del(dp, standalone_vid, false);
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(dsa_tag_8021q_bridge_join);
 
-int dsa_tag_8021q_bridge_leave(struct dsa_switch *ds,
-			       struct dsa_notifier_bridge_info *info)
+void dsa_tag_8021q_bridge_leave(struct dsa_switch *ds, int port,
+				struct dsa_bridge bridge)
 {
-	struct dsa_switch *targeted_ds;
-	struct dsa_port *targeted_dp;
-	struct dsa_port *dp;
-	u16 targeted_rx_vid;
-
-	if (!ds->tag_8021q_ctx)
-		return 0;
-
-	targeted_ds = dsa_switch_find(info->tree_index, info->sw_index);
-	targeted_dp = dsa_to_port(targeted_ds, info->port);
-	targeted_rx_vid = dsa_tag_8021q_rx_vid(targeted_dp);
-
-	dsa_switch_for_each_port(dp, ds) {
-		u16 rx_vid = dsa_tag_8021q_rx_vid(dp);
-
-		if (!dsa_port_tag_8021q_bridge_match(dp, info))
-			continue;
+	struct dsa_port *dp = dsa_to_port(ds, port);
+	u16 standalone_vid, bridge_vid;
+	int err;
 
-		/* Remove the RX VID of the targeted port from our VLAN table */
-		dsa_port_tag_8021q_vlan_del(dp, targeted_rx_vid, true);
+	/* Delete the bridging VLAN of the port and replace it with a
+	 * standalone VLAN
+	 */
+	standalone_vid = dsa_tag_8021q_standalone_vid(dp);
+	bridge_vid = dsa_tag_8021q_bridge_vid(bridge.num);
 
-		/* Remove our RX VID from the targeted port's VLAN table */
-		dsa_port_tag_8021q_vlan_del(targeted_dp, rx_vid, true);
+	err = dsa_port_tag_8021q_vlan_add(dp, standalone_vid, false);
+	if (err) {
+		dev_err(ds->dev,
+			"Failed to delete tag_8021q standalone VLAN %d from port %d: %pe\n",
+			standalone_vid, port, ERR_PTR(err));
 	}
 
-	return 0;
-}
-
-int dsa_tag_8021q_bridge_tx_fwd_offload(struct dsa_switch *ds, int port,
-					struct dsa_bridge bridge)
-{
-	u16 tx_vid = dsa_8021q_bridge_tx_fwd_offload_vid(bridge.num);
-
-	return dsa_port_tag_8021q_vlan_add(dsa_to_port(ds, port), tx_vid,
-					   true);
+	dsa_port_tag_8021q_vlan_del(dp, bridge_vid, true);
 }
-EXPORT_SYMBOL_GPL(dsa_tag_8021q_bridge_tx_fwd_offload);
+EXPORT_SYMBOL_GPL(dsa_tag_8021q_bridge_leave);
 
-void dsa_tag_8021q_bridge_tx_fwd_unoffload(struct dsa_switch *ds, int port,
-					   struct dsa_bridge bridge)
-{
-	u16 tx_vid = dsa_8021q_bridge_tx_fwd_offload_vid(bridge.num);
-
-	dsa_port_tag_8021q_vlan_del(dsa_to_port(ds, port), tx_vid, true);
-}
-EXPORT_SYMBOL_GPL(dsa_tag_8021q_bridge_tx_fwd_unoffload);
-
-/* Set up a port's tag_8021q RX and TX VLAN for standalone mode operation */
+/* Set up a port's standalone tag_8021q VLAN */
 static int dsa_tag_8021q_port_setup(struct dsa_switch *ds, int port)
 {
 	struct dsa_8021q_context *ctx = ds->tag_8021q_ctx;
 	struct dsa_port *dp = dsa_to_port(ds, port);
-	u16 rx_vid = dsa_tag_8021q_rx_vid(dp);
-	u16 tx_vid = dsa_tag_8021q_tx_vid(dp);
+	u16 vid = dsa_tag_8021q_standalone_vid(dp);
 	struct net_device *master;
 	int err;
 
@@ -446,30 +342,16 @@ static int dsa_tag_8021q_port_setup(struct dsa_switch *ds, int port)
 
 	master = dp->cpu_dp->master;
 
-	/* Add this user port's RX VID to the membership list of all others
-	 * (including itself). This is so that bridging will not be hindered.
-	 * L2 forwarding rules still take precedence when there are no VLAN
-	 * restrictions, so there are no concerns about leaking traffic.
-	 */
-	err = dsa_port_tag_8021q_vlan_add(dp, rx_vid, false);
+	err = dsa_port_tag_8021q_vlan_add(dp, vid, false);
 	if (err) {
 		dev_err(ds->dev,
-			"Failed to apply RX VID %d to port %d: %pe\n",
-			rx_vid, port, ERR_PTR(err));
+			"Failed to apply standalone VID %d to port %d: %pe\n",
+			vid, port, ERR_PTR(err));
 		return err;
 	}
 
-	/* Add @rx_vid to the master's RX filter. */
-	vlan_vid_add(master, ctx->proto, rx_vid);
-
-	/* Finally apply the TX VID on this port and on the CPU port */
-	err = dsa_port_tag_8021q_vlan_add(dp, tx_vid, false);
-	if (err) {
-		dev_err(ds->dev,
-			"Failed to apply TX VID %d on port %d: %pe\n",
-			tx_vid, port, ERR_PTR(err));
-		return err;
-	}
+	/* Add the VLAN to the master's RX filter. */
+	vlan_vid_add(master, ctx->proto, vid);
 
 	return err;
 }
@@ -478,8 +360,7 @@ static void dsa_tag_8021q_port_teardown(struct dsa_switch *ds, int port)
 {
 	struct dsa_8021q_context *ctx = ds->tag_8021q_ctx;
 	struct dsa_port *dp = dsa_to_port(ds, port);
-	u16 rx_vid = dsa_tag_8021q_rx_vid(dp);
-	u16 tx_vid = dsa_tag_8021q_tx_vid(dp);
+	u16 vid = dsa_tag_8021q_standalone_vid(dp);
 	struct net_device *master;
 
 	/* The CPU port is implicitly configured by
@@ -490,11 +371,9 @@ static void dsa_tag_8021q_port_teardown(struct dsa_switch *ds, int port)
 
 	master = dp->cpu_dp->master;
 
-	dsa_port_tag_8021q_vlan_del(dp, rx_vid, false);
+	dsa_port_tag_8021q_vlan_del(dp, vid, false);
 
-	vlan_vid_del(master, ctx->proto, rx_vid);
-
-	dsa_port_tag_8021q_vlan_del(dp, tx_vid, false);
+	vlan_vid_del(master, ctx->proto, vid);
 }
 
 static int dsa_tag_8021q_setup(struct dsa_switch *ds)
@@ -573,23 +452,57 @@ struct sk_buff *dsa_8021q_xmit(struct sk_buff *skb, struct net_device *netdev,
 }
 EXPORT_SYMBOL_GPL(dsa_8021q_xmit);
 
-void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id)
+struct net_device *dsa_tag_8021q_find_port_by_vbid(struct net_device *master,
+						   int vbid)
+{
+	struct dsa_port *cpu_dp = master->dsa_ptr;
+	struct dsa_switch_tree *dst = cpu_dp->dst;
+	struct dsa_port *dp;
+
+	if (WARN_ON(!vbid))
+		return NULL;
+
+	dsa_tree_for_each_user_port(dp, dst) {
+		if (!dp->bridge)
+			continue;
+
+		if (dp->stp_state != BR_STATE_LEARNING &&
+		    dp->stp_state != BR_STATE_FORWARDING)
+			continue;
+
+		if (dp->cpu_dp != cpu_dp)
+			continue;
+
+		if (dsa_port_bridge_num_get(dp) == vbid)
+			return dp->slave;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(dsa_tag_8021q_find_port_by_vbid);
+
+void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id,
+		   int *vbid)
 {
 	u16 vid, tci;
 
-	skb_push_rcsum(skb, ETH_HLEN);
 	if (skb_vlan_tag_present(skb)) {
 		tci = skb_vlan_tag_get(skb);
 		__vlan_hwaccel_clear_tag(skb);
 	} else {
+		skb_push_rcsum(skb, ETH_HLEN);
 		__skb_vlan_pop(skb, &tci);
+		skb_pull_rcsum(skb, ETH_HLEN);
 	}
-	skb_pull_rcsum(skb, ETH_HLEN);
 
 	vid = tci & VLAN_VID_MASK;
 
 	*source_port = dsa_8021q_rx_source_port(vid);
 	*switch_id = dsa_8021q_rx_switch_id(vid);
+
+	if (vbid)
+		*vbid = dsa_tag_8021q_rx_vbid(vid);
+
 	skb->priority = (tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
 }
 EXPORT_SYMBOL_GPL(dsa_8021q_rcv);