Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...

1 files changed, 60 insertions, 2 deletions

diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 1653e3377cb3..12998bf04e55 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -7,6 +7,7 @@
 #ifndef __DSA_PRIV_H
 #define __DSA_PRIV_H
 
+#include <linux/if_bridge.h>
 #include <linux/phy.h>
 #include <linux/netdevice.h>
 #include <linux/netpoll.h>
@@ -164,8 +165,6 @@ int dsa_port_vlan_add(struct dsa_port *dp,
 		      struct switchdev_trans *trans);
 int dsa_port_vlan_del(struct dsa_port *dp,
 		      const struct switchdev_obj_port_vlan *vlan);
-int dsa_port_vid_add(struct dsa_port *dp, u16 vid, u16 flags);
-int dsa_port_vid_del(struct dsa_port *dp, u16 vid);
 int dsa_port_link_register_of(struct dsa_port *dp);
 void dsa_port_link_unregister_of(struct dsa_port *dp);
 extern const struct phylink_mac_ops dsa_port_phylink_mac_ops;
@@ -196,6 +195,65 @@ dsa_slave_to_master(const struct net_device *dev)
 	return dp->cpu_dp->master;
 }
 
+/* If under a bridge with vlan_filtering=0, make sure to send pvid-tagged
+ * frames as untagged, since the bridge will not untag them.
+ */
+static inline struct sk_buff *dsa_untag_bridge_pvid(struct sk_buff *skb)
+{
+	struct dsa_port *dp = dsa_slave_to_port(skb->dev);
+	struct net_device *br = dp->bridge_dev;
+	struct net_device *dev = skb->dev;
+	struct net_device *upper_dev;
+	u16 vid, pvid, proto;
+	int err;
+
+	if (!br || br_vlan_enabled(br))
+		return skb;
+
+	err = br_vlan_get_proto(br, &proto);
+	if (err)
+		return skb;
+
+	/* Move VLAN tag from data to hwaccel */
+	if (!skb_vlan_tag_present(skb) && skb->protocol == htons(proto)) {
+		skb = skb_vlan_untag(skb);
+		if (!skb)
+			return NULL;
+	}
+
+	if (!skb_vlan_tag_present(skb))
+		return skb;
+
+	vid = skb_vlan_tag_get_id(skb);
+
+	/* We already run under an RCU read-side critical section since
+	 * we are called from netif_receive_skb_list_internal().
+	 */
+	err = br_vlan_get_pvid_rcu(dev, &pvid);
+	if (err)
+		return skb;
+
+	if (vid != pvid)
+		return skb;
+
+	/* The sad part about attempting to untag from DSA is that we
+	 * don't know, unless we check, if the skb will end up in
+	 * the bridge's data path - br_allowed_ingress() - or not.
+	 * For example, there might be an 8021q upper for the
+	 * default_pvid of the bridge, which will steal VLAN-tagged traffic
+	 * from the bridge's data path. This is a configuration that DSA
+	 * supports because vlan_filtering is 0. In that case, we should
+	 * definitely keep the tag, to make sure it keeps working.
+	 */
+	upper_dev = __vlan_find_dev_deep_rcu(br, htons(proto), vid);
+	if (upper_dev)
+		return skb;
+
+	__vlan_hwaccel_clear_tag(skb);
+
+	return skb;
+}
+
 /* switch.c */
 int dsa_switch_register_notifier(struct dsa_switch *ds);
 void dsa_switch_unregister_notifier(struct dsa_switch *ds);