Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The clk core gains a new set of APIs that allow drivers to both
  acquire clks and prepare and enable them at the same time. This also
  comes with devm support so that drivers can make a single call to get
  and prepare and enable the clk and have that all undone when their
  driver is removed.

  Many folks have requested this feature over the years, but we've had
  disagreements about how to implement it and if it was worthwhile to
  encourage drivers to use such an API.

  Now it's here, so let's see how it goes.

  I hope that by introducing this API we can identify drivers that would
  benefit from further consolidation of clk API usage, possibly by
  moving such logic to the bus layer and out of drivers altogether.

  Outside of that major API update, we have the usual collection of
  driver updates. A few new SoCs are supported, mostly Qualcomm and
  Renesas this time around. Then we have the long tail of non-critical
  fixes and minor feature additions to various clk drivers.

  And finally more clk provider migration to struct clk_parent_data,
  reducing boot times in the process.

  Summary:

  Core:

   - devm helpers for clk_get() + clk_prepare() and clk_enable()

  New Drivers:

   - Support for the camera clock controller in Qualcomm SM8450 and the
     display and gpu clock controllers in Qualcomm SM8350

   - Add support for the Renesas RZ/Five SoC

  Updates:

   - Various fixes, new clocks and USB GDSCs are introduced for Qualcomm
     IPQ8074

   - Fixes to Qualcomm MSM8939 for issues introduced by inheriting the
     MSM8916 GCC driver

   - Support for a new type of voteable GDSCs used by Qualcomm SC8280XP
     PCIe GDSCs

   - Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux
     implementation

   - Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994
     GCC are migrated to use clk_parent_data

   - Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845
     and SM8250

   - Qualcomm MSM8916 gains more possible frequencies for its GP clocks.

   - The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic
     the design in IPQ8074 to allow the GCC driver to probe earlier.

   - The regulator based mmcx supply for Qualcomm dispcc and videocc is
     dropped, as the only upstream target that adapted this interface
     was transitioned several kernel versions ago

   - Qualcomm GDSCs found to be enabled at boot will now reflect in the
     enable count of the supply, as was done with the regulator supplies
     previously

   - Correct adc1, nic_media and edma1's parents for NXP i.MX93

   - rdiv, mfd values, the return rate in recalc_rate and add more
     frequencies in the table for fracn-gppll on i.MX

   - Remove Allwinner workaround logic/compatible in fixed factor code

   - MediaTek clk driver cleanups

   - Add reset support to more MediaTek clk drivers

   - deduplicate Allwinner ccu_clks arrays

   - Allwinner H6 GPU DFS support

   - Adjust Allwinner Kconfig to limit choice

   - Fix initconst confusion on Renesas R-Car Gen4

   - Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L

   - Add PFC and WDT clocks and resets on Renesas RZ/V2M

   - Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on
     Renesas R-Car S4-8"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (124 commits)
  clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw()
  clk: mux: Introduce devm_clk_hw_register_mux_parent_hws()
  clk: divider: Introduce devm_clk_hw_register_divider_parent_hw()
  clk: qcom: gcc-msm8994: use parent_hws for gpll0/4
  clk: qcom: clk-rpm: convert to parent_data API
  dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
  clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies
  clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies
  clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies
  clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions
  clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock
  clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk
  clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled
  clk: qcom: Drop mmcx gdsc supply for dispcc and videocc
  clk: qcom: fix build error initializer element is not constant
  clk: sprd: Add dt-bindings include file for UMS512
  dt-bindings: clk: sprd: Add bindings for ums512 clock controller
  clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS
  dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources
  clk: qcom: add support for SM8350 DISPCC
  ...

9 files changed, 600 insertions, 8 deletions

diff --git a/include/dt-bindings/clock/qcom,gcc-ipq8074.h b/include/dt-bindings/clock/qcom,gcc-ipq8074.h
index 55f8322a1e50..e4991d303708 100644
--- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h
@@ -233,6 +233,7 @@
 #define GCC_PCIE0_AXI_S_BRIDGE_CLK		224
 #define GCC_PCIE0_RCHNG_CLK_SRC			225
 #define GCC_PCIE0_RCHNG_CLK			226
+#define GCC_CRYPTO_PPE_CLK			227
 
 #define GCC_BLSP1_BCR				0
 #define GCC_BLSP1_QUP1_BCR			1
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8939.h b/include/dt-bindings/clock/qcom,gcc-msm8939.h
index 0634467c4ce5..2d545ed0d35a 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8939.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8939.h
@@ -192,6 +192,7 @@
 #define GCC_VENUS0_CORE0_VCODEC0_CLK		183
 #define GCC_VENUS0_CORE1_VCODEC0_CLK		184
 #define GCC_OXILI_TIMER_CLK			185
+#define SYSTEM_MM_NOC_BFDCD_CLK_SRC		186
 
 /* Indexes for GDSCs */
 #define BIMC_GDSC				0
diff --git a/include/dt-bindings/clock/r9a07g043-cpg.h b/include/dt-bindings/clock/r9a07g043-cpg.h
index 27e232733096..77cde8effdc7 100644
--- a/include/dt-bindings/clock/r9a07g043-cpg.h
+++ b/include/dt-bindings/clock/r9a07g043-cpg.h
@@ -108,6 +108,15 @@
 #define R9A07G043_ADC_ADCLK		76
 #define R9A07G043_ADC_PCLK		77
 #define R9A07G043_TSU_PCLK		78
+#define R9A07G043_NCEPLDM_DM_CLK	79	/* RZ/Five Only */
+#define R9A07G043_NCEPLDM_ACLK		80	/* RZ/Five Only */
+#define R9A07G043_NCEPLDM_TCK		81	/* RZ/Five Only */
+#define R9A07G043_NCEPLMT_ACLK		82	/* RZ/Five Only */
+#define R9A07G043_NCEPLIC_ACLK		83	/* RZ/Five Only */
+#define R9A07G043_AX45MP_CORE0_CLK	84	/* RZ/Five Only */
+#define R9A07G043_AX45MP_ACLK		85	/* RZ/Five Only */
+#define R9A07G043_IAX45_CLK		86	/* RZ/Five Only */
+#define R9A07G043_IAX45_PCLK		87	/* RZ/Five Only */
 
 /* R9A07G043 Resets */
 #define R9A07G043_CA55_RST_1_0		0	/* RZ/G2UL Only */
@@ -180,5 +189,16 @@
 #define R9A07G043_ADC_PRESETN		67
 #define R9A07G043_ADC_ADRST_N		68
 #define R9A07G043_TSU_PRESETN		69
+#define R9A07G043_NCEPLDM_DTM_PWR_RST_N	70	/* RZ/Five Only */
+#define R9A07G043_NCEPLDM_ARESETN	71	/* RZ/Five Only */
+#define R9A07G043_NCEPLMT_POR_RSTN	72	/* RZ/Five Only */
+#define R9A07G043_NCEPLMT_ARESETN	73	/* RZ/Five Only */
+#define R9A07G043_NCEPLIC_ARESETN	74	/* RZ/Five Only */
+#define R9A07G043_AX45MP_ARESETNM	75	/* RZ/Five Only */
+#define R9A07G043_AX45MP_ARESETNS	76	/* RZ/Five Only */
+#define R9A07G043_AX45MP_L2_RESETN	77	/* RZ/Five Only */
+#define R9A07G043_AX45MP_CORE0_RESETN	78	/* RZ/Five Only */
+#define R9A07G043_IAX45_RESETN		79	/* RZ/Five Only */
+
 
 #endif /* __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__ */
diff --git a/include/dt-bindings/clock/sprd,ums512-clk.h b/include/dt-bindings/clock/sprd,ums512-clk.h
new file mode 100644
index 000000000000..4f1d90849944
--- /dev/null
+++ b/include/dt-bindings/clock/sprd,ums512-clk.h
@@ -0,0 +1,397 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Unisoc UMS512 SoC DTS file
+ *
+ * Copyright (C) 2022, Unisoc Inc.
+ */
+
+#ifndef _DT_BINDINGS_CLK_UMS512_H_
+#define _DT_BINDINGS_CLK_UMS512_H_
+
+#define CLK_26M_AUD			0
+#define CLK_13M				1
+#define CLK_6M5				2
+#define CLK_4M3				3
+#define CLK_2M				4
+#define CLK_1M				5
+#define CLK_250K			6
+#define CLK_RCO_25M			7
+#define CLK_RCO_4M			8
+#define CLK_RCO_2M			9
+#define CLK_ISPPLL_GATE			10
+#define CLK_DPLL0_GATE			11
+#define CLK_DPLL1_GATE			12
+#define CLK_LPLL_GATE			13
+#define CLK_TWPLL_GATE			14
+#define CLK_GPLL_GATE			15
+#define CLK_RPLL_GATE			16
+#define CLK_CPPLL_GATE			17
+#define CLK_MPLL0_GATE			18
+#define CLK_MPLL1_GATE			19
+#define CLK_MPLL2_GATE			20
+#define CLK_PMU_GATE_NUM		(CLK_MPLL2_GATE + 1)
+
+#define CLK_DPLL0			0
+#define CLK_DPLL0_58M31			1
+#define CLK_ANLG_PHY_G0_NUM		(CLK_DPLL0_58M31 + 1)
+
+#define CLK_MPLL1			0
+#define CLK_MPLL1_63M38			1
+#define CLK_ANLG_PHY_G2_NUM		(CLK_MPLL1_63M38 + 1)
+
+#define CLK_RPLL			0
+#define CLK_AUDIO_GATE			1
+#define CLK_MPLL0			2
+#define CLK_MPLL0_56M88			3
+#define CLK_MPLL2			4
+#define CLK_MPLL2_47M13			5
+#define CLK_ANLG_PHY_G3_NUM		(CLK_MPLL2_47M13 + 1)
+
+#define CLK_TWPLL			0
+#define CLK_TWPLL_768M			1
+#define CLK_TWPLL_384M			2
+#define CLK_TWPLL_192M			3
+#define CLK_TWPLL_96M			4
+#define CLK_TWPLL_48M			5
+#define CLK_TWPLL_24M			6
+#define CLK_TWPLL_12M			7
+#define CLK_TWPLL_512M			8
+#define CLK_TWPLL_256M			9
+#define CLK_TWPLL_128M			10
+#define CLK_TWPLL_64M			11
+#define CLK_TWPLL_307M2			12
+#define CLK_TWPLL_219M4			13
+#define CLK_TWPLL_170M6			14
+#define CLK_TWPLL_153M6			15
+#define CLK_TWPLL_76M8			16
+#define CLK_TWPLL_51M2			17
+#define CLK_TWPLL_38M4			18
+#define CLK_TWPLL_19M2			19
+#define CLK_TWPLL_12M29			20
+#define CLK_LPLL			21
+#define CLK_LPLL_614M4			22
+#define CLK_LPLL_409M6			23
+#define CLK_LPLL_245M76			24
+#define CLK_LPLL_30M72			25
+#define CLK_ISPPLL			26
+#define CLK_ISPPLL_468M			27
+#define CLK_ISPPLL_78M			28
+#define CLK_GPLL			29
+#define CLK_GPLL_40M			30
+#define CLK_CPPLL			31
+#define CLK_CPPLL_39M32			32
+#define CLK_ANLG_PHY_GC_NUM		(CLK_CPPLL_39M32 + 1)
+
+#define CLK_AP_APB			0
+#define CLK_IPI			        1
+#define CLK_AP_UART0			2
+#define CLK_AP_UART1			3
+#define CLK_AP_UART2			4
+#define CLK_AP_I2C0			5
+#define CLK_AP_I2C1			6
+#define CLK_AP_I2C2			7
+#define CLK_AP_I2C3			8
+#define CLK_AP_I2C4			9
+#define CLK_AP_SPI0			10
+#define CLK_AP_SPI1			11
+#define CLK_AP_SPI2			12
+#define CLK_AP_SPI3			13
+#define CLK_AP_IIS0			14
+#define CLK_AP_IIS1			15
+#define CLK_AP_IIS2			16
+#define CLK_AP_SIM			17
+#define CLK_AP_CE			18
+#define CLK_SDIO0_2X			19
+#define CLK_SDIO1_2X			20
+#define CLK_EMMC_2X			21
+#define CLK_VSP				22
+#define CLK_DISPC0			23
+#define CLK_DISPC0_DPI			24
+#define CLK_DSI_APB			25
+#define CLK_DSI_RXESC			26
+#define CLK_DSI_LANEBYTE		27
+#define CLK_VDSP		        28
+#define CLK_VDSP_M		        29
+#define CLK_AP_CLK_NUM			(CLK_VDSP_M + 1)
+
+#define CLK_DSI_EB			0
+#define CLK_DISPC_EB			1
+#define CLK_VSP_EB			2
+#define CLK_VDMA_EB			3
+#define CLK_DMA_PUB_EB			4
+#define CLK_DMA_SEC_EB			5
+#define CLK_IPI_EB			6
+#define CLK_AHB_CKG_EB			7
+#define CLK_BM_CLK_EB			8
+#define CLK_AP_AHB_GATE_NUM		(CLK_BM_CLK_EB + 1)
+
+#define CLK_AON_APB			0
+#define CLK_ADI				1
+#define CLK_AUX0			2
+#define CLK_AUX1			3
+#define CLK_AUX2			4
+#define CLK_PROBE			5
+#define CLK_PWM0			6
+#define CLK_PWM1			7
+#define CLK_PWM2			8
+#define CLK_PWM3			9
+#define CLK_EFUSE			10
+#define CLK_UART0			11
+#define CLK_UART1			12
+#define CLK_THM0			13
+#define CLK_THM1			14
+#define CLK_THM2			15
+#define CLK_THM3			16
+#define CLK_AON_I2C			17
+#define CLK_AON_IIS			18
+#define CLK_SCC				19
+#define CLK_APCPU_DAP			20
+#define CLK_APCPU_DAP_MTCK		21
+#define CLK_APCPU_TS			22
+#define CLK_DEBUG_TS			23
+#define CLK_DSI_TEST_S			24
+#define CLK_DJTAG_TCK			25
+#define CLK_DJTAG_TCK_HW		26
+#define CLK_AON_TMR			27
+#define CLK_AON_PMU			28
+#define CLK_DEBOUNCE			29
+#define CLK_APCPU_PMU			30
+#define CLK_TOP_DVFS			31
+#define CLK_OTG_UTMI			32
+#define CLK_OTG_REF			33
+#define CLK_CSSYS			34
+#define CLK_CSSYS_PUB			35
+#define CLK_CSSYS_APB			36
+#define CLK_AP_AXI			37
+#define CLK_AP_MM			38
+#define CLK_SDIO2_2X			39
+#define CLK_ANALOG_IO_APB		40
+#define CLK_DMC_REF_CLK			41
+#define CLK_EMC				42
+#define CLK_USB				43
+#define CLK_26M_PMU			44
+#define CLK_AON_APB_NUM			(CLK_26M_PMU + 1)
+
+#define CLK_MM_AHB			0
+#define CLK_MM_MTX			1
+#define CLK_SENSOR0			2
+#define CLK_SENSOR1			3
+#define CLK_SENSOR2			4
+#define CLK_CPP				5
+#define CLK_JPG				6
+#define CLK_FD				7
+#define CLK_DCAM_IF			8
+#define CLK_DCAM_AXI			9
+#define CLK_ISP				10
+#define CLK_MIPI_CSI0			11
+#define CLK_MIPI_CSI1			12
+#define CLK_MIPI_CSI2			13
+#define CLK_MM_CLK_NUM			(CLK_MIPI_CSI2 + 1)
+
+#define CLK_RC100M_CAL_EB		0
+#define CLK_DJTAG_TCK_EB		1
+#define CLK_DJTAG_EB			2
+#define CLK_AUX0_EB			3
+#define CLK_AUX1_EB			4
+#define CLK_AUX2_EB			5
+#define CLK_PROBE_EB			6
+#define CLK_MM_EB			7
+#define CLK_GPU_EB			8
+#define CLK_MSPI_EB			9
+#define CLK_APCPU_DAP_EB		10
+#define CLK_AON_CSSYS_EB		11
+#define CLK_CSSYS_APB_EB		12
+#define CLK_CSSYS_PUB_EB		13
+#define CLK_SDPHY_CFG_EB		14
+#define CLK_SDPHY_REF_EB		15
+#define CLK_EFUSE_EB			16
+#define CLK_GPIO_EB			17
+#define CLK_MBOX_EB			18
+#define CLK_KPD_EB			19
+#define CLK_AON_SYST_EB			20
+#define CLK_AP_SYST_EB			21
+#define CLK_AON_TMR_EB			22
+#define CLK_OTG_UTMI_EB			23
+#define CLK_OTG_PHY_EB			24
+#define CLK_SPLK_EB			25
+#define CLK_PIN_EB			26
+#define CLK_ANA_EB			27
+#define CLK_APCPU_TS0_EB		28
+#define CLK_APB_BUSMON_EB		29
+#define CLK_AON_IIS_EB			30
+#define CLK_SCC_EB			31
+#define CLK_THM0_EB			32
+#define CLK_THM1_EB			33
+#define CLK_THM2_EB			34
+#define CLK_ASIM_TOP_EB			35
+#define CLK_I2C_EB			36
+#define CLK_PMU_EB			37
+#define CLK_ADI_EB			38
+#define CLK_EIC_EB			39
+#define CLK_AP_INTC0_EB			40
+#define CLK_AP_INTC1_EB			41
+#define CLK_AP_INTC2_EB			42
+#define CLK_AP_INTC3_EB			43
+#define CLK_AP_INTC4_EB			44
+#define CLK_AP_INTC5_EB			45
+#define CLK_AUDCP_INTC_EB		46
+#define CLK_AP_TMR0_EB			47
+#define CLK_AP_TMR1_EB			48
+#define CLK_AP_TMR2_EB			49
+#define CLK_PWM0_EB			50
+#define CLK_PWM1_EB			51
+#define CLK_PWM2_EB			52
+#define CLK_PWM3_EB			53
+#define CLK_AP_WDG_EB			54
+#define CLK_APCPU_WDG_EB		55
+#define CLK_SERDES_EB			56
+#define CLK_ARCH_RTC_EB			57
+#define CLK_KPD_RTC_EB			58
+#define CLK_AON_SYST_RTC_EB		59
+#define CLK_AP_SYST_RTC_EB		60
+#define CLK_AON_TMR_RTC_EB		61
+#define CLK_EIC_RTC_EB			62
+#define CLK_EIC_RTCDV5_EB		63
+#define CLK_AP_WDG_RTC_EB		64
+#define CLK_AC_WDG_RTC_EB		65
+#define CLK_AP_TMR0_RTC_EB		66
+#define CLK_AP_TMR1_RTC_EB		67
+#define CLK_AP_TMR2_RTC_EB		68
+#define CLK_DCXO_LC_RTC_EB		69
+#define CLK_BB_CAL_RTC_EB		70
+#define CLK_AP_EMMC_RTC_EB		71
+#define CLK_AP_SDIO0_RTC_EB		72
+#define CLK_AP_SDIO1_RTC_EB		73
+#define CLK_AP_SDIO2_RTC_EB		74
+#define CLK_DSI_CSI_TEST_EB		75
+#define CLK_DJTAG_TCK_EN		76
+#define CLK_DPHY_REF_EB			77
+#define CLK_DMC_REF_EB			78
+#define CLK_OTG_REF_EB			79
+#define CLK_TSEN_EB			80
+#define CLK_TMR_EB			81
+#define CLK_RC100M_REF_EB		82
+#define CLK_RC100M_FDK_EB		83
+#define CLK_DEBOUNCE_EB			84
+#define CLK_DET_32K_EB			85
+#define CLK_TOP_CSSYS_EB		86
+#define CLK_AP_AXI_EN			87
+#define CLK_SDIO0_2X_EN			88
+#define CLK_SDIO0_1X_EN			89
+#define CLK_SDIO1_2X_EN			90
+#define CLK_SDIO1_1X_EN			91
+#define CLK_SDIO2_2X_EN			92
+#define CLK_SDIO2_1X_EN			93
+#define CLK_EMMC_2X_EN			94
+#define CLK_EMMC_1X_EN			95
+#define CLK_PLL_TEST_EN			96
+#define CLK_CPHY_CFG_EN			97
+#define CLK_DEBUG_TS_EN			98
+#define CLK_ACCESS_AUD_EN		99
+#define CLK_AON_APB_GATE_NUM		(CLK_ACCESS_AUD_EN + 1)
+
+#define CLK_MM_CPP_EB			0
+#define CLK_MM_JPG_EB			1
+#define CLK_MM_DCAM_EB			2
+#define CLK_MM_ISP_EB			3
+#define CLK_MM_CSI2_EB			4
+#define CLK_MM_CSI1_EB			5
+#define CLK_MM_CSI0_EB			6
+#define CLK_MM_CKG_EB			7
+#define CLK_ISP_AHB_EB			8
+#define CLK_MM_DVFS_EB			9
+#define CLK_MM_FD_EB			10
+#define CLK_MM_SENSOR2_EB		11
+#define CLK_MM_SENSOR1_EB		12
+#define CLK_MM_SENSOR0_EB		13
+#define CLK_MM_MIPI_CSI2_EB		14
+#define CLK_MM_MIPI_CSI1_EB		15
+#define CLK_MM_MIPI_CSI0_EB		16
+#define CLK_DCAM_AXI_EB			17
+#define CLK_ISP_AXI_EB			18
+#define CLK_MM_CPHY_EB			19
+#define CLK_MM_GATE_CLK_NUM		(CLK_MM_CPHY_EB + 1)
+
+#define CLK_SIM0_EB			0
+#define CLK_IIS0_EB			1
+#define CLK_IIS1_EB			2
+#define CLK_IIS2_EB			3
+#define CLK_APB_REG_EB			4
+#define CLK_SPI0_EB			5
+#define CLK_SPI1_EB			6
+#define CLK_SPI2_EB			7
+#define CLK_SPI3_EB			8
+#define CLK_I2C0_EB			9
+#define CLK_I2C1_EB			10
+#define CLK_I2C2_EB			11
+#define CLK_I2C3_EB			12
+#define CLK_I2C4_EB			13
+#define CLK_UART0_EB			14
+#define CLK_UART1_EB			15
+#define CLK_UART2_EB			16
+#define CLK_SIM0_32K_EB			17
+#define CLK_SPI0_LFIN_EB		18
+#define CLK_SPI1_LFIN_EB		19
+#define CLK_SPI2_LFIN_EB		20
+#define CLK_SPI3_LFIN_EB		21
+#define CLK_SDIO0_EB			22
+#define CLK_SDIO1_EB			23
+#define CLK_SDIO2_EB			24
+#define CLK_EMMC_EB			25
+#define CLK_SDIO0_32K_EB		26
+#define CLK_SDIO1_32K_EB		27
+#define CLK_SDIO2_32K_EB		28
+#define CLK_EMMC_32K_EB			29
+#define CLK_AP_APB_GATE_NUM		(CLK_EMMC_32K_EB + 1)
+
+#define CLK_GPU_CORE_EB			0
+#define CLK_GPU_CORE			1
+#define CLK_GPU_MEM_EB			2
+#define CLK_GPU_MEM			3
+#define CLK_GPU_SYS_EB			4
+#define CLK_GPU_SYS			5
+#define CLK_GPU_CLK_NUM			(CLK_GPU_SYS + 1)
+
+#define CLK_AUDCP_IIS0_EB		0
+#define CLK_AUDCP_IIS1_EB		1
+#define CLK_AUDCP_IIS2_EB		2
+#define CLK_AUDCP_UART_EB		3
+#define CLK_AUDCP_DMA_CP_EB		4
+#define CLK_AUDCP_DMA_AP_EB		5
+#define CLK_AUDCP_SRC48K_EB		6
+#define CLK_AUDCP_MCDT_EB		7
+#define CLK_AUDCP_VBCIFD_EB		8
+#define CLK_AUDCP_VBC_EB		9
+#define CLK_AUDCP_SPLK_EB		10
+#define CLK_AUDCP_ICU_EB		11
+#define CLK_AUDCP_DMA_AP_ASHB_EB	12
+#define CLK_AUDCP_DMA_CP_ASHB_EB	13
+#define CLK_AUDCP_AUD_EB		14
+#define CLK_AUDCP_VBC_24M_EB		15
+#define CLK_AUDCP_TMR_26M_EB		16
+#define CLK_AUDCP_DVFS_ASHB_EB		17
+#define CLK_AUDCP_AHB_GATE_NUM		(CLK_AUDCP_DVFS_ASHB_EB + 1)
+
+#define CLK_AUDCP_WDG_EB		0
+#define CLK_AUDCP_RTC_WDG_EB		1
+#define CLK_AUDCP_TMR0_EB		2
+#define CLK_AUDCP_TMR1_EB		3
+#define CLK_AUDCP_APB_GATE_NUM		(CLK_AUDCP_TMR1_EB + 1)
+
+#define CLK_ACORE0			0
+#define CLK_ACORE1			1
+#define CLK_ACORE2			2
+#define CLK_ACORE3			3
+#define CLK_ACORE4			4
+#define CLK_ACORE5			5
+#define CLK_PCORE0			6
+#define CLK_PCORE1			7
+#define CLK_SCU				8
+#define CLK_ACE				9
+#define CLK_PERIPH			10
+#define CLK_GIC				11
+#define CLK_ATB				12
+#define CLK_DEBUG_APB			13
+#define CLK_APCPU_SEC_NUM		(CLK_DEBUG_APB + 1)
+
+#endif /* _DT_BINDINGS_CLK_UMS512_H_ */
diff --git a/include/dt-bindings/reset/mt8186-resets.h b/include/dt-bindings/reset/mt8186-resets.h
index 5f850370c42c..2e9029c22f38 100644
--- a/include/dt-bindings/reset/mt8186-resets.h
+++ b/include/dt-bindings/reset/mt8186-resets.h
@@ -7,6 +7,7 @@
 #ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8186
 #define _DT_BINDINGS_RESET_CONTROLLER_MT8186
 
+/* TOPRGU resets */
 #define MT8186_TOPRGU_INFRA_SW_RST				0
 #define MT8186_TOPRGU_MM_SW_RST					1
 #define MT8186_TOPRGU_MFG_SW_RST				2
@@ -33,4 +34,8 @@
 /* MMSYS resets */
 #define MT8186_MMSYS_SW0_RST_B_DISP_DSI0			19
 
+/* INFRA resets */
+#define MT8186_INFRA_THERMAL_CTRL_RST			0
+#define MT8186_INFRA_PTP_CTRL_RST				1
+
 #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT8186 */
diff --git a/include/dt-bindings/reset/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h
index 764ca9910fa9..12e2087c90a3 100644
--- a/include/dt-bindings/reset/mt8192-resets.h
+++ b/include/dt-bindings/reset/mt8192-resets.h
@@ -7,6 +7,7 @@
 #ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8192
 #define _DT_BINDINGS_RESET_CONTROLLER_MT8192
 
+/* TOPRGU resets */
 #define MT8192_TOPRGU_MM_SW_RST					1
 #define MT8192_TOPRGU_MFG_SW_RST				2
 #define MT8192_TOPRGU_VENC_SW_RST				3
@@ -30,4 +31,11 @@
 /* MMSYS resets */
 #define MT8192_MMSYS_SW0_RST_B_DISP_DSI0			15
 
+/* INFRA resets */
+#define MT8192_INFRA_RST0_THERM_CTRL_SWRST		0
+#define MT8192_INFRA_RST2_PEXTP_PHY_SWRST		1
+#define MT8192_INFRA_RST3_THERM_CTRL_PTP_SWRST	2
+#define MT8192_INFRA_RST4_PCIE_TOP_SWRST		3
+#define MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST	4
+
 #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT8192 */
diff --git a/include/dt-bindings/reset/mt8195-resets.h b/include/dt-bindings/reset/mt8195-resets.h
index a26bccc8b957..0b1937f14b36 100644
--- a/include/dt-bindings/reset/mt8195-resets.h
+++ b/include/dt-bindings/reset/mt8195-resets.h
@@ -7,6 +7,7 @@
 #ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8195
 #define _DT_BINDINGS_RESET_CONTROLLER_MT8195
 
+/* TOPRGU resets */
 #define MT8195_TOPRGU_CONN_MCU_SW_RST          0
 #define MT8195_TOPRGU_INFRA_GRST_SW_RST        1
 #define MT8195_TOPRGU_APU_SW_RST               2
@@ -26,4 +27,9 @@
 
 #define MT8195_TOPRGU_SW_RST_NUM               16
 
+/* INFRA resets */
+#define MT8195_INFRA_RST0_THERM_CTRL_SWRST     0
+#define MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST 1
+#define MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST 2
+
 #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT8195 */
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index c10dc4c659e2..1615010aa0ec 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -832,6 +832,25 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
 				  NULL, (flags), (reg), (shift), (width),     \
 				  (clk_divider_flags), NULL, (lock))
 /**
+ * devm_clk_hw_register_divider_parent_hw - register a divider clock with the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_hw: pointer to parent clk
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
+#define devm_clk_hw_register_divider_parent_hw(dev, name, parent_hw, flags,   \
+					       reg, shift, width,	      \
+					       clk_divider_flags, lock)       \
+	__devm_clk_hw_register_divider((dev), NULL, (name), NULL,	      \
+				       (parent_hw), NULL, (flags), (reg),     \
+				       (shift), (width), (clk_divider_flags), \
+				       NULL, (lock))
+/**
  * devm_clk_hw_register_divider_table - register a table based divider clock
  * with the clock framework (devres variant)
  * @dev: device registering this clock
@@ -961,6 +980,13 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name,
 			      (parent_names), NULL, NULL, (flags), (reg),     \
 			      (shift), BIT((width)) - 1, (clk_mux_flags),     \
 			      NULL, (lock))
+#define devm_clk_hw_register_mux_parent_hws(dev, name, parent_hws,	      \
+					    num_parents, flags, reg, shift,   \
+					    width, clk_mux_flags, lock)       \
+	__devm_clk_hw_register_mux((dev), NULL, (name), (num_parents), NULL,  \
+				   (parent_hws), NULL, (flags), (reg),        \
+				   (shift), BIT((width)) - 1,		      \
+				   (clk_mux_flags), NULL, (lock))
 
 int clk_mux_val_to_index(struct clk_hw *hw, const u32 *table, unsigned int flags,
 			 unsigned int val);
@@ -1006,6 +1032,14 @@ struct clk_hw *devm_clk_hw_register_fixed_factor(struct device *dev,
 struct clk_hw *devm_clk_hw_register_fixed_factor_index(struct device *dev,
 		const char *name, unsigned int index, unsigned long flags,
 		unsigned int mult, unsigned int div);
+
+struct clk_hw *devm_clk_hw_register_fixed_factor_parent_hw(struct device *dev,
+		const char *name, const struct clk_hw *parent_hw,
+		unsigned long flags, unsigned int mult, unsigned int div);
+
+struct clk_hw *clk_hw_register_fixed_factor_parent_hw(struct device *dev,
+		const char *name, const struct clk_hw *parent_hw,
+		unsigned long flags, unsigned int mult, unsigned int div);
 /**
  * struct clk_fractional_divider - adjustable fractional divider clock
  *
@@ -1176,10 +1210,8 @@ int __must_check devm_clk_hw_register(struct device *dev, struct clk_hw *hw);
 int __must_check of_clk_hw_register(struct device_node *node, struct clk_hw *hw);
 
 void clk_unregister(struct clk *clk);
-void devm_clk_unregister(struct device *dev, struct clk *clk);
 
 void clk_hw_unregister(struct clk_hw *hw);
-void devm_clk_hw_unregister(struct device *dev, struct clk_hw *hw);
 
 /* helper functions */
 const char *__clk_get_name(const struct clk *clk);
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 39faa54efe88..c13061cabdfc 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -443,15 +443,16 @@ int __must_check devm_clk_bulk_get_all(struct device *dev,
  * @dev: device for clock "consumer"
  * @id: clock consumer ID
  *
- * Returns a struct clk corresponding to the clock producer, or
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
  * valid IS_ERR() condition containing errno.  The implementation
  * uses @dev and @id to determine the clock consumer, and thereby
  * the clock producer.  (IOW, @id may be identical strings, but
  * clk_get may return different clock producers depending on @dev.)
  *
- * Drivers must assume that the clock source is not enabled.
- *
- * devm_clk_get should not be called from within interrupt context.
+ * Drivers must assume that the clock source is neither prepared nor
+ * enabled.
  *
  * The clock will automatically be freed when the device is unbound
  * from the bus.
@@ -459,17 +460,114 @@ int __must_check devm_clk_bulk_get_all(struct device *dev,
 struct clk *devm_clk_get(struct device *dev, const char *id);
 
 /**
+ * devm_clk_get_prepared - devm_clk_get() + clk_prepare()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  (IOW, @id may be identical strings, but
+ * clk_get may return different clock producers depending on @dev.)
+ *
+ * The returned clk (if valid) is prepared. Drivers must however assume
+ * that the clock is not enabled.
+ *
+ * The clock will automatically be unprepared and freed when the device
+ * is unbound from the bus.
+ */
+struct clk *devm_clk_get_prepared(struct device *dev, const char *id);
+
+/**
+ * devm_clk_get_enabled - devm_clk_get() + clk_prepare_enable()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  (IOW, @id may be identical strings, but
+ * clk_get may return different clock producers depending on @dev.)
+ *
+ * The returned clk (if valid) is prepared and enabled.
+ *
+ * The clock will automatically be disabled, unprepared and freed
+ * when the device is unbound from the bus.
+ */
+struct clk *devm_clk_get_enabled(struct device *dev, const char *id);
+
+/**
  * devm_clk_get_optional - lookup and obtain a managed reference to an optional
  *			   clock producer.
  * @dev: device for clock "consumer"
  * @id: clock consumer ID
  *
- * Behaves the same as devm_clk_get() except where there is no clock producer.
- * In this case, instead of returning -ENOENT, the function returns NULL.
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  If no such clk is found, it returns NULL
+ * which serves as a dummy clk.  That's the only difference compared
+ * to devm_clk_get().
+ *
+ * Drivers must assume that the clock source is neither prepared nor
+ * enabled.
+ *
+ * The clock will automatically be freed when the device is unbound
+ * from the bus.
  */
 struct clk *devm_clk_get_optional(struct device *dev, const char *id);
 
 /**
+ * devm_clk_get_optional_prepared - devm_clk_get_optional() + clk_prepare()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  If no such clk is found, it returns NULL
+ * which serves as a dummy clk.  That's the only difference compared
+ * to devm_clk_get_prepared().
+ *
+ * The returned clk (if valid) is prepared. Drivers must however
+ * assume that the clock is not enabled.
+ *
+ * The clock will automatically be unprepared and freed when the
+ * device is unbound from the bus.
+ */
+struct clk *devm_clk_get_optional_prepared(struct device *dev, const char *id);
+
+/**
+ * devm_clk_get_optional_enabled - devm_clk_get_optional() +
+ *                                 clk_prepare_enable()
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Context: May sleep.
+ *
+ * Return: a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  If no such clk is found, it returns NULL
+ * which serves as a dummy clk.  That's the only difference compared
+ * to devm_clk_get_enabled().
+ *
+ * The returned clk (if valid) is prepared and enabled.
+ *
+ * The clock will automatically be disabled, unprepared and freed
+ * when the device is unbound from the bus.
+ */
+struct clk *devm_clk_get_optional_enabled(struct device *dev, const char *id);
+
+/**
  * devm_get_clk_from_child - lookup and obtain a managed reference to a
  *			     clock producer from child node.
  * @dev: device for clock "consumer"
@@ -813,12 +911,36 @@ static inline struct clk *devm_clk_get(struct device *dev, const char *id)
 	return NULL;
 }
 
+static inline struct clk *devm_clk_get_prepared(struct device *dev,
+						const char *id)
+{
+	return NULL;
+}
+
+static inline struct clk *devm_clk_get_enabled(struct device *dev,
+					       const char *id)
+{
+	return NULL;
+}
+
 static inline struct clk *devm_clk_get_optional(struct device *dev,
 						const char *id)
 {
 	return NULL;
 }
 
+static inline struct clk *devm_clk_get_optional_prepared(struct device *dev,
+							 const char *id)
+{
+	return NULL;
+}
+
+static inline struct clk *devm_clk_get_optional_enabled(struct device *dev,
+							const char *id)
+{
+	return NULL;
+}
+
 static inline int __must_check devm_clk_bulk_get(struct device *dev, int num_clks,
 						 struct clk_bulk_data *clks)
 {