Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "This release brings up a new platform based on the old ARM9 core: the
  Nuvoton NPCM is used as a baseboard management controller, competing
  with the better known ASpeed AST2xx series.

  Another important change is the addition of ARMv7-A based chips in
  mach-stm32. The older parts in this platform are ARMv7-M based
  microcontrollers, now they are expanding to general-purpose workloads.

  The other changes are the usual defconfig updates to enable additional
  drivers, lesser bugfixes. The largest updates as often are the ongoing
  OMAP cleanups, but we also have a number of changes for the older PXA
  and davinci platforms this time.

  For the Renesas shmobile/r-car platform, some new infrastructure is
  needed to make the watchdog work correctly.

  Supporting Multiprocessing on Allwinner A80 required a significant
  amount of new code, but is not doing anything unexpected"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits)
  arm: npcm: modify configuration for the NPCM7xx BMC.
  MAINTAINERS: update entry for ARM/berlin
  ARM: omap2: fix am43xx build without L2X0
  ARM: davinci: da8xx: simplify CFGCHIP regmap_config
  ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
  ARM: multi_v7_defconfig: add NXP FlexCAN IP support
  ARM: multi_v7_defconfig: enable thermal driver for i.MX devices
  ARM: multi_v7_defconfig: add RN5T618 PMIC family support
  ARM: multi_v7_defconfig: add NXP graphics drivers
  ARM: multi_v7_defconfig: add GPMI NAND controller support
  ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs
  ARM: multi_v7_defconfig: configure I2C driver built-in
  arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
  ARM: imx: fix imx6sll-only build
  ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well
  ARM: mxs_defconfig: Re-sync defconfig
  ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver
  ARM: imx_v4_v5_defconfig: Re-sync defconfig
  arm64: defconfig: enable stmmac ethernet to defconfig
  ARM: EXYNOS: Simplify code in coupled CPU idle hot path
  ...

14 files changed, 642 insertions, 72 deletions

diff --git a/include/clocksource/timer-ti-dm.h b/include/clocksource/timer-ti-dm.h
new file mode 100644
index 000000000000..7d9598dc578d
--- /dev/null
+++ b/include/clocksource/timer-ti-dm.h
@@ -0,0 +1,394 @@
+/*
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Platform device conversion and hwmod support.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#ifndef __CLOCKSOURCE_DMTIMER_H
+#define __CLOCKSOURCE_DMTIMER_H
+
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK			0x00
+#define OMAP_TIMER_SRC_32_KHZ			0x01
+#define OMAP_TIMER_SRC_EXT_CLK			0x02
+
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
+#define OMAP_TIMER_INT_MATCH			(1 << 0)
+
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE			0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
+
+/* posted mode types */
+#define OMAP_TIMER_NONPOSTED			0x00
+#define OMAP_TIMER_POSTED			0x01
+
+/* timer capabilities used in hwmod database */
+#define OMAP_TIMER_SECURE				0x80000000
+#define OMAP_TIMER_ALWON				0x40000000
+#define OMAP_TIMER_HAS_PWM				0x20000000
+#define OMAP_TIMER_NEEDS_RESET				0x10000000
+#define OMAP_TIMER_HAS_DSP_IRQ				0x08000000
+
+/*
+ * timer errata flags
+ *
+ * Errata i103/i767 impacts all OMAP3/4/5 devices including AM33xx. This
+ * errata prevents us from using posted mode on these devices, unless the
+ * timer counter register is never read. For more details please refer to
+ * the OMAP3/4/5 errata documents.
+ */
+#define OMAP_TIMER_ERRATA_I103_I767			0x80000000
+
+struct timer_regs {
+	u32 tidr;
+	u32 tier;
+	u32 twer;
+	u32 tclr;
+	u32 tcrr;
+	u32 tldr;
+	u32 ttrg;
+	u32 twps;
+	u32 tmar;
+	u32 tcar1;
+	u32 tsicr;
+	u32 tcar2;
+	u32 tpir;
+	u32 tnir;
+	u32 tcvr;
+	u32 tocr;
+	u32 towr;
+};
+
+struct omap_dm_timer {
+	int id;
+	int irq;
+	struct clk *fclk;
+
+	void __iomem	*io_base;
+	void __iomem	*irq_stat;	/* TISR/IRQSTATUS interrupt status */
+	void __iomem	*irq_ena;	/* irq enable */
+	void __iomem	*irq_dis;	/* irq disable, only on v2 ip */
+	void __iomem	*pend;		/* write pending */
+	void __iomem	*func_base;	/* function register base */
+
+	unsigned long rate;
+	unsigned reserved:1;
+	unsigned posted:1;
+	struct timer_regs context;
+	int (*get_context_loss_count)(struct device *);
+	int ctx_loss_count;
+	int revision;
+	u32 capability;
+	u32 errata;
+	struct platform_device *pdev;
+	struct list_head node;
+};
+
+int omap_dm_timer_reserve_systimer(int id);
+struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap);
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+
+int omap_dm_timer_trigger(struct omap_dm_timer *timer);
+
+int omap_dm_timers_active(void);
+
+/*
+ * Do not use the defines below, they are not needed. They should be only
+ * used by dmtimer.c and sys_timer related code.
+ */
+
+/*
+ * The interrupt registers are different between v1 and v2 ip.
+ * These registers are offsets from timer->iobase.
+ */
+#define OMAP_TIMER_ID_OFFSET		0x00
+#define OMAP_TIMER_OCP_CFG_OFFSET	0x10
+
+#define OMAP_TIMER_V1_SYS_STAT_OFFSET	0x14
+#define OMAP_TIMER_V1_STAT_OFFSET	0x18
+#define OMAP_TIMER_V1_INT_EN_OFFSET	0x1c
+
+#define OMAP_TIMER_V2_IRQSTATUS_RAW	0x24
+#define OMAP_TIMER_V2_IRQSTATUS		0x28
+#define OMAP_TIMER_V2_IRQENABLE_SET	0x2c
+#define OMAP_TIMER_V2_IRQENABLE_CLR	0x30
+
+/*
+ * The functional registers have a different base on v1 and v2 ip.
+ * These registers are offsets from timer->func_base. The func_base
+ * is samae as io_base for v1 and io_base + 0x14 for v2 ip.
+ *
+ */
+#define OMAP_TIMER_V2_FUNC_OFFSET		0x14
+
+#define _OMAP_TIMER_WAKEUP_EN_OFFSET	0x20
+#define _OMAP_TIMER_CTRL_OFFSET		0x24
+#define		OMAP_TIMER_CTRL_GPOCFG		(1 << 14)
+#define		OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
+#define		OMAP_TIMER_CTRL_PT		(1 << 12)
+#define		OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
+#define		OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
+#define		OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
+#define		OMAP_TIMER_CTRL_SCPWM		(1 << 7)
+#define		OMAP_TIMER_CTRL_CE		(1 << 6) /* compare enable */
+#define		OMAP_TIMER_CTRL_PRE		(1 << 5) /* prescaler enable */
+#define		OMAP_TIMER_CTRL_PTV_SHIFT	2 /* prescaler value shift */
+#define		OMAP_TIMER_CTRL_POSTED		(1 << 2)
+#define		OMAP_TIMER_CTRL_AR		(1 << 1) /* auto-reload enable */
+#define		OMAP_TIMER_CTRL_ST		(1 << 0) /* start timer */
+#define _OMAP_TIMER_COUNTER_OFFSET	0x28
+#define _OMAP_TIMER_LOAD_OFFSET		0x2c
+#define _OMAP_TIMER_TRIGGER_OFFSET	0x30
+#define _OMAP_TIMER_WRITE_PEND_OFFSET	0x34
+#define		WP_NONE			0	/* no write pending bit */
+#define		WP_TCLR			(1 << 0)
+#define		WP_TCRR			(1 << 1)
+#define		WP_TLDR			(1 << 2)
+#define		WP_TTGR			(1 << 3)
+#define		WP_TMAR			(1 << 4)
+#define		WP_TPIR			(1 << 5)
+#define		WP_TNIR			(1 << 6)
+#define		WP_TCVR			(1 << 7)
+#define		WP_TOCR			(1 << 8)
+#define		WP_TOWR			(1 << 9)
+#define _OMAP_TIMER_MATCH_OFFSET	0x38
+#define _OMAP_TIMER_CAPTURE_OFFSET	0x3c
+#define _OMAP_TIMER_IF_CTRL_OFFSET	0x40
+#define _OMAP_TIMER_CAPTURE2_OFFSET		0x44	/* TCAR2, 34xx only */
+#define _OMAP_TIMER_TICK_POS_OFFSET		0x48	/* TPIR, 34xx only */
+#define _OMAP_TIMER_TICK_NEG_OFFSET		0x4c	/* TNIR, 34xx only */
+#define _OMAP_TIMER_TICK_COUNT_OFFSET		0x50	/* TCVR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET	0x54	/* TOCR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET	0x58	/* TOWR, 34xx only */
+
+/* register offsets with the write pending bit encoded */
+#define	WPSHIFT					16
+
+#define OMAP_TIMER_WAKEUP_EN_REG		(_OMAP_TIMER_WAKEUP_EN_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CTRL_REG			(_OMAP_TIMER_CTRL_OFFSET \
+							| (WP_TCLR << WPSHIFT))
+
+#define OMAP_TIMER_COUNTER_REG			(_OMAP_TIMER_COUNTER_OFFSET \
+							| (WP_TCRR << WPSHIFT))
+
+#define OMAP_TIMER_LOAD_REG			(_OMAP_TIMER_LOAD_OFFSET \
+							| (WP_TLDR << WPSHIFT))
+
+#define OMAP_TIMER_TRIGGER_REG			(_OMAP_TIMER_TRIGGER_OFFSET \
+							| (WP_TTGR << WPSHIFT))
+
+#define OMAP_TIMER_WRITE_PEND_REG		(_OMAP_TIMER_WRITE_PEND_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_MATCH_REG			(_OMAP_TIMER_MATCH_OFFSET \
+							| (WP_TMAR << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE_REG			(_OMAP_TIMER_CAPTURE_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_IF_CTRL_REG			(_OMAP_TIMER_IF_CTRL_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE2_REG			(_OMAP_TIMER_CAPTURE2_OFFSET \
+							| (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_TICK_POS_REG			(_OMAP_TIMER_TICK_POS_OFFSET \
+							| (WP_TPIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_NEG_REG			(_OMAP_TIMER_TICK_NEG_OFFSET \
+							| (WP_TNIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_COUNT_REG		(_OMAP_TIMER_TICK_COUNT_OFFSET \
+							| (WP_TCVR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_SET_REG				\
+		(_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
+		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
+
+/*
+ * The below are inlined to optimize code size for system timers. Other code
+ * should not need these at all, see
+ * include/linux/platform_data/pwm_omap_dmtimer.h
+ */
+#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2PLUS)
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
+						int posted)
+{
+	if (posted)
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+			cpu_relax();
+
+	return readl_relaxed(timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+					u32 reg, u32 val, int posted)
+{
+	if (posted)
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
+			cpu_relax();
+
+	writel_relaxed(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+	u32 tidr;
+
+	/* Assume v1 ip if bits [31:16] are zero */
+	tidr = readl_relaxed(timer->io_base);
+	if (!(tidr >> 16)) {
+		timer->revision = 1;
+		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+		timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+		timer->func_base = timer->io_base;
+	} else {
+		timer->revision = 2;
+		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+		timer->pend = timer->io_base +
+			_OMAP_TIMER_WRITE_PEND_OFFSET +
+				OMAP_TIMER_V2_FUNC_OFFSET;
+		timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+	}
+}
+
+/*
+ * __omap_dm_timer_enable_posted - enables write posted mode
+ * @timer:      pointer to timer instance handle
+ *
+ * Enables the write posted mode for the timer. When posted mode is enabled
+ * writes to certain timer registers are immediately acknowledged by the
+ * internal bus and hence prevents stalling the CPU waiting for the write to
+ * complete. Enabling this feature can improve performance for writing to the
+ * timer registers.
+ */
+static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
+{
+	if (timer->posted)
+		return;
+
+	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+		timer->posted = OMAP_TIMER_NONPOSTED;
+		__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
+		return;
+	}
+
+	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
+			      OMAP_TIMER_CTRL_POSTED, 0);
+	timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
+	timer->posted = OMAP_TIMER_POSTED;
+}
+
+/**
+ * __omap_dm_timer_override_errata - override errata flags for a timer
+ * @timer:      pointer to timer handle
+ * @errata:	errata flags to be ignored
+ *
+ * For a given timer, override a timer errata by clearing the flags
+ * specified by the errata argument. A specific erratum should only be
+ * overridden for a timer if the timer is used in such a way the erratum
+ * has no impact.
+ */
+static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer,
+						   u32 errata)
+{
+	timer->errata &= ~errata;
+}
+
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+					int posted, unsigned long rate)
+{
+	u32 l;
+
+	l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+	if (l & OMAP_TIMER_CTRL_ST) {
+		l &= ~0x1;
+		__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+		/* Readback to make sure write has completed */
+		__omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+		/*
+		 * Wait for functional clock period x 3.5 to make sure that
+		 * timer is stopped
+		 */
+		udelay(3500000 / rate + 1);
+#endif
+	}
+
+	/* Ack possibly pending interrupt */
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+}
+
+static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
+						u32 ctrl, unsigned int load,
+						int posted)
+{
+	__omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
+	__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
+}
+
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
+						unsigned int value)
+{
+	writel_relaxed(value, timer->irq_ena);
+	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+}
+
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
+{
+	return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
+}
+
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
+						unsigned int value)
+{
+	writel_relaxed(value, timer->irq_stat);
+}
+#endif /* CONFIG_ARCH_OMAP1 || CONFIG_ARCH_OMAP2PLUS */
+#endif /* __CLOCKSOURCE_DMTIMER_H */
diff --git a/include/dt-bindings/power/r8a77965-sysc.h b/include/dt-bindings/power/r8a77965-sysc.h
new file mode 100644
index 000000000000..05a4b5917314
--- /dev/null
+++ b/include/dt-bindings/power/r8a77965-sysc.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ * Copyright (C) 2016 Glider bvba
+ */
+
+#ifndef __DT_BINDINGS_POWER_R8A77965_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77965_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77965_PD_CA57_CPU0		 0
+#define R8A77965_PD_CA57_CPU1		 1
+#define R8A77965_PD_A3VP		 9
+#define R8A77965_PD_CA57_SCU		12
+#define R8A77965_PD_CR7			13
+#define R8A77965_PD_A3VC		14
+#define R8A77965_PD_3DG_A		17
+#define R8A77965_PD_3DG_B		18
+#define R8A77965_PD_A3IR		24
+#define R8A77965_PD_A2VC1		26
+
+/* Always-on power area */
+#define R8A77965_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A77965_SYSC_H__ */
diff --git a/include/dt-bindings/power/r8a77980-sysc.h b/include/dt-bindings/power/r8a77980-sysc.h
new file mode 100644
index 000000000000..2c90c1237725
--- /dev/null
+++ b/include/dt-bindings/power/r8a77980-sysc.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A77980_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77980_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77980_PD_A2SC2		0
+#define R8A77980_PD_A2SC3		1
+#define R8A77980_PD_A2SC4		2
+#define R8A77980_PD_A2PD0		3
+#define R8A77980_PD_A2PD1		4
+#define R8A77980_PD_CA53_CPU0		5
+#define R8A77980_PD_CA53_CPU1		6
+#define R8A77980_PD_CA53_CPU2		7
+#define R8A77980_PD_CA53_CPU3		8
+#define R8A77980_PD_A2CN		10
+#define R8A77980_PD_A3VIP		11
+#define R8A77980_PD_A2IR5		12
+#define R8A77980_PD_CR7			13
+#define R8A77980_PD_A2IR4		15
+#define R8A77980_PD_CA53_SCU		21
+#define R8A77980_PD_A2IR0		23
+#define R8A77980_PD_A3IR		24
+#define R8A77980_PD_A3VIP1		25
+#define R8A77980_PD_A3VIP2		26
+#define R8A77980_PD_A2IR1		27
+#define R8A77980_PD_A2IR2		28
+#define R8A77980_PD_A2IR3		29
+#define R8A77980_PD_A2SC0		30
+#define R8A77980_PD_A2SC1		31
+
+/* Always-on power area */
+#define R8A77980_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A77980_SYSC_H__ */
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index d18da839b810..7e3bceee3489 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -203,6 +203,7 @@ enum {
 	TI_CLKM_PRM,
 	TI_CLKM_SCRM,
 	TI_CLKM_CTRL,
+	TI_CLKM_CTRL_AUX,
 	TI_CLKM_PLLSS,
 	CLK_MAX_MEMMAPS
 };
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index e684543254f3..e319d0a2ec82 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -25,10 +25,6 @@
 #include <linux/spinlock.h>
 #include <linux/clk.h>
 
-#define MCBSP_CONFIG_TYPE2	0x2
-#define MCBSP_CONFIG_TYPE3	0x3
-#define MCBSP_CONFIG_TYPE4	0x4
-
 /* Platform specific configuration */
 struct omap_mcbsp_ops {
 	void (*request)(unsigned int);
@@ -47,14 +43,6 @@ struct omap_mcbsp_platform_data {
 	int (*force_ick_on)(struct clk *clk, bool force_on);
 };
 
-/**
- * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
- * @sidetone: name of the sidetone device
- */
-struct omap_mcbsp_dev_attr {
-	const char *sidetone;
-};
-
 void omap3_mcbsp_init_pdata_callback(struct omap_mcbsp_platform_data *pdata);
 
 #endif
diff --git a/include/linux/platform_data/dmtimer-omap.h b/include/linux/platform_data/dmtimer-omap.h
index a19b78d826e9..757a0f9e26f9 100644
--- a/include/linux/platform_data/dmtimer-omap.h
+++ b/include/linux/platform_data/dmtimer-omap.h
@@ -20,12 +20,50 @@
 #ifndef __PLATFORM_DATA_DMTIMER_OMAP_H__
 #define __PLATFORM_DATA_DMTIMER_OMAP_H__
 
+struct omap_dm_timer_ops {
+	struct omap_dm_timer *(*request_by_node)(struct device_node *np);
+	struct omap_dm_timer *(*request_specific)(int timer_id);
+	struct omap_dm_timer *(*request)(void);
+
+	int	(*free)(struct omap_dm_timer *timer);
+
+	void	(*enable)(struct omap_dm_timer *timer);
+	void	(*disable)(struct omap_dm_timer *timer);
+
+	int	(*get_irq)(struct omap_dm_timer *timer);
+	int	(*set_int_enable)(struct omap_dm_timer *timer,
+				  unsigned int value);
+	int	(*set_int_disable)(struct omap_dm_timer *timer, u32 mask);
+
+	struct clk *(*get_fclk)(struct omap_dm_timer *timer);
+
+	int	(*start)(struct omap_dm_timer *timer);
+	int	(*stop)(struct omap_dm_timer *timer);
+	int	(*set_source)(struct omap_dm_timer *timer, int source);
+
+	int	(*set_load)(struct omap_dm_timer *timer, int autoreload,
+			    unsigned int value);
+	int	(*set_match)(struct omap_dm_timer *timer, int enable,
+			     unsigned int match);
+	int	(*set_pwm)(struct omap_dm_timer *timer, int def_on,
+			   int toggle, int trigger);
+	int	(*set_prescaler)(struct omap_dm_timer *timer, int prescaler);
+
+	unsigned int (*read_counter)(struct omap_dm_timer *timer);
+	int	(*write_counter)(struct omap_dm_timer *timer,
+				 unsigned int value);
+	unsigned int (*read_status)(struct omap_dm_timer *timer);
+	int	(*write_status)(struct omap_dm_timer *timer,
+				unsigned int value);
+};
+
 struct dmtimer_platform_data {
 	/* set_timer_src - Only used for OMAP1 devices */
 	int (*set_timer_src)(struct platform_device *pdev, int source);
 	u32 timer_capability;
 	u32 timer_errata;
 	int (*get_context_loss_count)(struct device *);
+	const struct omap_dm_timer_ops *timer_ops;
 };
 
 #endif /* __PLATFORM_DATA_DMTIMER_OMAP_H__ */
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
index cb2618147c34..8612855691b2 100644
--- a/include/linux/platform_data/gpio-omap.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -157,11 +157,6 @@
 #define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
 #define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
 
-struct omap_gpio_dev_attr {
-	int bank_width;		/* GPIO bank width */
-	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
-};
-
 struct omap_gpio_reg_offs {
 	u16 revision;
 	u16 direction;
diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h
index b42ad83cbc20..4fd0f592a2d2 100644
--- a/include/linux/platform_data/mtd-nand-pxa3xx.h
+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
@@ -6,41 +6,22 @@
 #include <linux/mtd/partitions.h>
 
 /*
- * Current pxa3xx_nand controller has two chip select which
- * both be workable.
- *
- * Notice should be taken that:
- * When you want to use this feature, you should not enable the
- * keep configuration feature, for two chip select could be
- * attached with different nand chip. The different page size
- * and timing requirement make the keep configuration impossible.
+ * Current pxa3xx_nand controller has two chip select which both be workable but
+ * historically all platforms remaining on platform data used only one. Switch
+ * to device tree if you need more.
  */
-
-/* The max num of chip select current support */
-#define NUM_CHIP_SELECT		(2)
 struct pxa3xx_nand_platform_data {
-
-	/* the data flash bus is shared between the Static Memory
-	 * Controller and the Data Flash Controller,  the arbiter
-	 * controls the ownership of the bus
-	 */
-	int	enable_arbiter;
-
-	/* allow platform code to keep OBM/bootloader defined NFC config */
-	int	keep_config;
-
-	/* indicate how many chip selects will be used */
-	int	num_cs;
-
-	/* use an flash-based bad block table */
-	bool	flash_bbt;
-
-	/* requested ECC strength and ECC step size */
+	/* Keep OBM/bootloader NFC timing configuration */
+	bool keep_config;
+	/* Use a flash-based bad block table */
+	bool flash_bbt;
+	/* Requested ECC strength and ECC step size */
 	int ecc_strength, ecc_step_size;
-
-	const struct mtd_partition		*parts[NUM_CHIP_SELECT];
-	unsigned int				nr_parts[NUM_CHIP_SELECT];
+	/* Partitions */
+	const struct mtd_partition *parts;
+	unsigned int nr_parts;
 };
 
 extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
+
 #endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/include/linux/platform_data/phy-da8xx-usb.h b/include/linux/platform_data/phy-da8xx-usb.h
new file mode 100644
index 000000000000..85c2b99381b2
--- /dev/null
+++ b/include/linux/platform_data/phy-da8xx-usb.h
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver
+ *
+ * Copyright (C) 2018 David Lechner <david@lechnology.com>
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__
+#define __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__
+
+#include <linux/regmap.h>
+
+/**
+ * da8xx_usb_phy_platform_data
+ * @cfgchip: CFGCHIP syscon regmap
+ */
+struct da8xx_usb_phy_platform_data {
+	struct regmap *cfgchip;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__ */
diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h
new file mode 100644
index 000000000000..f9bed2a0af9d
--- /dev/null
+++ b/include/linux/platform_data/pm33xx.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * TI pm33xx platform data
+ *
+ * Copyright (C) 2016-2018 Texas Instruments, Inc.
+ *	Dave Gerlach <d-gerlach@ti.com>
+ */
+
+#ifndef _LINUX_PLATFORM_DATA_PM33XX_H
+#define _LINUX_PLATFORM_DATA_PM33XX_H
+
+#include <linux/kbuild.h>
+#include <linux/types.h>
+
+#ifndef __ASSEMBLER__
+struct am33xx_pm_sram_addr {
+	void (*do_wfi)(void);
+	unsigned long *do_wfi_sz;
+	unsigned long *resume_offset;
+	unsigned long *emif_sram_table;
+	unsigned long *ro_sram_data;
+};
+
+struct am33xx_pm_platform_data {
+	int	(*init)(void);
+	int	(*soc_suspend)(unsigned int state, int (*fn)(unsigned long));
+	struct  am33xx_pm_sram_addr *(*get_sram_addrs)(void);
+};
+
+struct am33xx_pm_sram_data {
+	u32 wfi_flags;
+	u32 l2_aux_ctrl_val;
+	u32 l2_prefetch_ctrl_val;
+} __packed __aligned(8);
+
+struct am33xx_pm_ro_sram_data {
+	u32 amx3_pm_sram_data_virt;
+	u32 amx3_pm_sram_data_phys;
+} __packed __aligned(8);
+
+#endif /* __ASSEMBLER__ */
+#endif /* _LINUX_PLATFORM_DATA_PM33XX_H */
diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h
index 13c83a25958a..0bf9fddb8306 100644
--- a/include/linux/platform_data/spi-omap2-mcspi.h
+++ b/include/linux/platform_data/spi-omap2-mcspi.h
@@ -2,10 +2,6 @@
 #ifndef _OMAP2_MCSPI_H
 #define _OMAP2_MCSPI_H
 
-#define OMAP2_MCSPI_REV 0
-#define OMAP3_MCSPI_REV 1
-#define OMAP4_MCSPI_REV 2
-
 #define OMAP4_MCSPI_REG_OFFSET 0x100
 
 #define MCSPI_PINDIR_D0_IN_D1_OUT	0
@@ -17,10 +13,6 @@ struct omap2_mcspi_platform_config {
 	unsigned int pin_dir:1;
 };
 
-struct omap2_mcspi_dev_attr {
-	unsigned short num_chipselect;
-};
-
 struct omap2_mcspi_device_config {
 	unsigned turbo_mode:1;
 
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index 1be356330b96..80ce28d40832 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -16,6 +16,10 @@ enum ti_sysc_module_type {
 	TI_SYSC_OMAP4_USB_HOST_FS,
 };
 
+struct ti_sysc_cookie {
+	void *data;
+};
+
 /**
  * struct sysc_regbits - TI OCP_SYSCONFIG register field offsets
  * @midle_shift: Offset of the midle bit
@@ -41,6 +45,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_LEGACY_IDLE		BIT(8)
 #define SYSC_QUIRK_RESET_STATUS		BIT(7)
 #define SYSC_QUIRK_NO_IDLE_ON_INIT	BIT(6)
 #define SYSC_QUIRK_NO_RESET_ON_INIT	BIT(5)
@@ -83,4 +88,49 @@ struct sysc_config {
 	u32 quirks;
 };
 
+enum sysc_registers {
+	SYSC_REVISION,
+	SYSC_SYSCONFIG,
+	SYSC_SYSSTATUS,
+	SYSC_MAX_REGS,
+};
+
+/**
+ * struct ti_sysc_module_data - ti-sysc to hwmod translation data for a module
+ * @name: legacy "ti,hwmods" module name
+ * @module_pa: physical address of the interconnect target module
+ * @module_size: size of the interconnect target module
+ * @offsets: array of register offsets as listed in enum sysc_registers
+ * @nr_offsets: number of registers
+ * @cap: interconnect target module capabilities
+ * @cfg: interconnect target module configuration
+ *
+ * This data is enough to allocate a new struct omap_hwmod_class_sysconfig
+ * based on device tree data parsed by ti-sysc driver.
+ */
+struct ti_sysc_module_data {
+	const char *name;
+	u64 module_pa;
+	u32 module_size;
+	int *offsets;
+	int nr_offsets;
+	const struct sysc_capabilities *cap;
+	struct sysc_config *cfg;
+};
+
+struct device;
+
+struct ti_sysc_platform_data {
+	struct of_dev_auxdata *auxdata;
+	int (*init_module)(struct device *dev,
+			   const struct ti_sysc_module_data *data,
+			   struct ti_sysc_cookie *cookie);
+	int (*enable_module)(struct device *dev,
+			     const struct ti_sysc_cookie *cookie);
+	int (*idle_module)(struct device *dev,
+			   const struct ti_sysc_cookie *cookie);
+	int (*shutdown_module)(struct device *dev,
+			       const struct ti_sysc_cookie *cookie);
+};
+
 #endif	/* __TI_SYSC_DATA_H__ */
diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
index d8b187c3925d..7b81dad712de 100644
--- a/include/linux/power/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -143,6 +143,13 @@
 #define OMAP3430_SR_ERRWEIGHT		0x04
 #define OMAP3430_SR_ERRMAXLIMIT		0x02
 
+enum sr_instance {
+	OMAP_SR_MPU,			/* shared with iva on omap3 */
+	OMAP_SR_CORE,
+	OMAP_SR_IVA,
+	OMAP_SR_NR,
+};
+
 struct omap_sr {
 	char				*name;
 	struct list_head		node;
@@ -207,7 +214,6 @@ struct omap_smartreflex_dev_attr {
 	const char      *sensor_voltdm_name;
 };
 
-#ifdef CONFIG_POWER_AVS_OMAP
 /*
  * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
  * The smartreflex class driver should pass the class type.
@@ -290,6 +296,8 @@ struct omap_sr_data {
 	struct voltagedomain		*voltdm;
 };
 
+#ifdef CONFIG_POWER_AVS_OMAP
+
 /* Smartreflex module enable/disable interface */
 void omap_sr_enable(struct voltagedomain *voltdm);
 void omap_sr_disable(struct voltagedomain *voltdm);
diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h
index a7f004a3c177..463ed28d2b27 100644
--- a/include/linux/serial_s3c.h
+++ b/include/linux/serial_s3c.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  *  Internal header file for Samsung S3C2410 serial ports (UART0-2)
  *
@@ -10,21 +11,7 @@
  *  Internal header file for MX1ADS serial ports (UART1 & 2)
  *
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
+ */
 
 #ifndef __ASM_ARM_REGS_SERIAL_H
 #define __ASM_ARM_REGS_SERIAL_H