Merge branch 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "This contains two bigger than usual tree-wide changes this time. They
  all have proper acks, caused no merge conflicts in linux-next where
  they have been for a while. They are namely:

   - to-gpiod conversion of the i2c-gpio driver and its users (touching
     arch/* and drivers/mfd/*)

   - adding a sbs-manager based on I2C core updates to SMBus alerts
     (touching drivers/power/*)

  Other notable changes:

   - i2c_boardinfo can now carry a dev_name to be used when the device
     is created. This is because some devices in ACPI world need fixed
     names to find the regulators.

   - the designware driver got a long discussed overhaul of its PM
     handling. img-scb and davinci got PM support, too.

   - at24 driver has way better OF support. And it has a new maintainer.
     Thanks Bartosz for stepping up!

  The rest is regular driver updates and fixes"

* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
  ARM: sa1100: simpad: Correct I2C GPIO offsets
  i2c: aspeed: Deassert reset in probe
  eeprom: at24: Add OF device ID table
  MAINTAINERS: new maintainer for AT24 driver
  i2c: nuc900: remove platform_data, too
  i2c: thunderx: Remove duplicate NULL check
  i2c: taos-evm: Remove duplicate NULL check
  i2c: Make i2c_unregister_device() NULL-aware
  i2c: xgene-slimpro: Support v2
  i2c: mpc: remove useless variable initialization
  i2c: omap: Trigger bus recovery in lockup case
  i2c: gpio: Add support for named gpios in DT
  dt-bindings: i2c: i2c-gpio: Add support for named gpios
  i2c: gpio: Local vars in probe
  i2c: gpio: Augment all boardfiles to use open drain
  i2c: gpio: Enforce open drain through gpiolib
  gpio: Make it possible for consumers to enforce open drain
  i2c: gpio: Convert to use descriptors
  power: supply: sbs-message: fix some code style issues
  power: supply: sbs-battery: remove unchecked return var
  ...

5 files changed, 17 insertions, 15 deletions

diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 6d236656aaef..7447d85dbe2f 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -29,6 +29,7 @@ struct gpio_descs {
 #define GPIOD_FLAGS_BIT_DIR_SET		BIT(0)
 #define GPIOD_FLAGS_BIT_DIR_OUT		BIT(1)
 #define GPIOD_FLAGS_BIT_DIR_VAL		BIT(2)
+#define GPIOD_FLAGS_BIT_OPEN_DRAIN	BIT(3)
 
 /**
  * Optional flags that can be passed to one of gpiod_* to configure direction
@@ -40,6 +41,11 @@ enum gpiod_flags {
 	GPIOD_OUT_LOW	= GPIOD_FLAGS_BIT_DIR_SET | GPIOD_FLAGS_BIT_DIR_OUT,
 	GPIOD_OUT_HIGH	= GPIOD_FLAGS_BIT_DIR_SET | GPIOD_FLAGS_BIT_DIR_OUT |
 			  GPIOD_FLAGS_BIT_DIR_VAL,
+	GPIOD_OUT_LOW_OPEN_DRAIN = GPIOD_FLAGS_BIT_DIR_SET |
+			  GPIOD_FLAGS_BIT_DIR_OUT | GPIOD_FLAGS_BIT_OPEN_DRAIN,
+	GPIOD_OUT_HIGH_OPEN_DRAIN = GPIOD_FLAGS_BIT_DIR_SET |
+			  GPIOD_FLAGS_BIT_DIR_OUT | GPIOD_FLAGS_BIT_DIR_VAL |
+			  GPIOD_FLAGS_BIT_OPEN_DRAIN,
 };
 
 #ifdef CONFIG_GPIOLIB
diff --git a/include/linux/i2c-gpio.h b/include/linux/i2c-gpio.h
index c1bcb1f1d73b..352c1426fd4d 100644
--- a/include/linux/i2c-gpio.h
+++ b/include/linux/i2c-gpio.h
@@ -12,8 +12,6 @@
 
 /**
  * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
- * @sda_pin: GPIO pin ID to use for SDA
- * @scl_pin: GPIO pin ID to use for SCL
  * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
  * @timeout: clock stretching timeout in jiffies. If the slave keeps
  *	SCL low for longer than this, the transfer will time out.
@@ -26,8 +24,6 @@
  * @scl_is_output_only: SCL output drivers cannot be turned off.
  */
 struct i2c_gpio_platform_data {
-	unsigned int	sda_pin;
-	unsigned int	scl_pin;
 	int		udelay;
 	int		timeout;
 	unsigned int	sda_is_open_drain:1;
diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h
index a1385023a29b..fb0e040b1abb 100644
--- a/include/linux/i2c-smbus.h
+++ b/include/linux/i2c-smbus.h
@@ -42,7 +42,6 @@
  * properly set.
  */
 struct i2c_smbus_alert_setup {
-	unsigned int		alert_edge_triggered:1;
 	int			irq;
 };
 
@@ -50,4 +49,13 @@ struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
 					 struct i2c_smbus_alert_setup *setup);
 int i2c_handle_smbus_alert(struct i2c_client *ara);
 
+#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF)
+int of_i2c_setup_smbus_alert(struct i2c_adapter *adap);
+#else
+static inline int of_i2c_setup_smbus_alert(struct i2c_adapter *adap)
+{
+	return 0;
+}
+#endif
+
 #endif /* _LINUX_I2C_SMBUS_H */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index d501d3956f13..0f774406fad0 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -304,6 +304,7 @@ static inline bool i2c_detect_slave_mode(struct device *dev) { return false; }
  * @type: chip type, to initialize i2c_client.name
  * @flags: to initialize i2c_client.flags
  * @addr: stored in i2c_client.addr
+ * @dev_name: Overrides the default <busnr>-<addr> dev_name if set
  * @platform_data: stored in i2c_client.dev.platform_data
  * @archdata: copied into i2c_client.dev.archdata
  * @of_node: pointer to OpenFirmware device node
@@ -328,6 +329,7 @@ struct i2c_board_info {
 	char		type[I2C_NAME_SIZE];
 	unsigned short	flags;
 	unsigned short	addr;
+	const char	*dev_name;
 	void		*platform_data;
 	struct dev_archdata	*archdata;
 	struct device_node *of_node;
diff --git a/include/linux/platform_data/i2c-nuc900.h b/include/linux/platform_data/i2c-nuc900.h
deleted file mode 100644
index 23036273a97e..000000000000
--- a/include/linux/platform_data/i2c-nuc900.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_NUC900_I2C_H
-#define __ASM_ARCH_NUC900_I2C_H
-
-struct nuc900_platform_i2c {
-	int		bus_num;
-	unsigned long   bus_freq;
-};
-
-#endif /* __ASM_ARCH_NUC900_I2C_H */