From 728fe6cef27444b6575c5e7ab5de13274610488b Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 11 Oct 2017 11:41:19 +0200 Subject: i2c: Allow overriding dev_name through board_info For devices not instantiated through ACPI the i2c-client's device-name gets set to - by default, e.g. "0-0022" this means that the device-name is dependent on the order in which the i2c-busses are enumerated. In some cases having a predictable constant device-name is desirable, for example on non device-tree platforms the link between a regulator and its consumers is specified by the platform code by setting regulator_init_data.consumers. This array identifies the regulator's consumers by dev_name and supply(-name). Which requires a constant dev_name. This commit adds a dev_name field to i2c_board_info allowing platform code to set a contstant dev_name so that the device can be identified by its dev_name in other platform code. Signed-off-by: Hans de Goede Acked-by: Mark Brown (live at ELCE17) Acked-by: Andy Shevchenko (live at ELCE17) Signed-off-by: Wolfram Sang --- include/linux/i2c.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index d501d3956f13..0f774406fad0 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -304,6 +304,7 @@ static inline bool i2c_detect_slave_mode(struct device *dev) { return false; } * @type: chip type, to initialize i2c_client.name * @flags: to initialize i2c_client.flags * @addr: stored in i2c_client.addr + * @dev_name: Overrides the default - dev_name if set * @platform_data: stored in i2c_client.dev.platform_data * @archdata: copied into i2c_client.dev.archdata * @of_node: pointer to OpenFirmware device node @@ -328,6 +329,7 @@ struct i2c_board_info { char type[I2C_NAME_SIZE]; unsigned short flags; unsigned short addr; + const char *dev_name; void *platform_data; struct dev_archdata *archdata; struct device_node *of_node; -- cgit v1.2.3 From 9b9f2b8bc2ac98d91da714660c53d1cdac999e09 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Thu, 24 Aug 2017 17:31:01 +0800 Subject: i2c: i2c-smbus: Use threaded irq for smbalert Prior to this commit the smbalert_irq was handling in the hard irq context. This change switch to using a thread irq which avoids the need for the work thread. Using threaded irq also removes the need for the edge_triggered flag as the enabling / disabling of the hard irq for level triggered interrupts will be handled by the irq core. Without this change have an irq connected to something like an i2c gpio resulted in a null ptr deferences. Specifically handle_nested_irq calls the threaded irq handler. There are currently 3 in tree drivers affected by this change. i2c-parport driver calls i2c_handle_smbus_alert in a hard irq context. This driver use edge trigger interrupts which skip the enable / disable calls. But it still need to handle the smbus transaction on a thread. So the work thread is kept for this driver. i2c-parport-light & i2c-thunderx-pcidrv provide the irq number in the setup which will result in the thread irq being used. i2c-parport-light is edge trigger so the enable / disable call was skipped as well. i2c-thunderx-pcidrv is getting the edge / level trigger setting from of data and was setting the flag as required. However the irq core should handle this automatically. Signed-off-by: Phil Reid Reviewed-by: Benjamin Tissoires Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-parport-light.c | 1 - drivers/i2c/busses/i2c-parport.c | 1 - drivers/i2c/busses/i2c-thunderx-pcidrv.c | 6 ----- drivers/i2c/i2c-smbus.c | 41 +++++++++++++------------------- include/linux/i2c-smbus.h | 1 - 5 files changed, 17 insertions(+), 33 deletions(-) (limited to 'include') diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index faa8fb8f2b8f..fa41ff799533 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -123,7 +123,6 @@ static struct i2c_adapter parport_adapter = { /* SMBus alert support */ static struct i2c_smbus_alert_setup alert_data = { - .alert_edge_triggered = 1, }; static struct i2c_client *ara; static struct lineop parport_ctrl_irq = { diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index a8e54df4aed6..319209a07353 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -237,7 +237,6 @@ static void i2c_parport_attach(struct parport *port) /* Setup SMBus alert if supported */ if (adapter_parm[type].smbus_alert) { - adapter->alert_data.alert_edge_triggered = 1; adapter->ara = i2c_setup_smbus_alert(&adapter->adapter, &adapter->alert_data); if (adapter->ara) diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c index df0976f4432a..1a7cad874756 100644 --- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c +++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c @@ -118,8 +118,6 @@ static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk) static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c, struct device_node *node) { - u32 type; - if (!node) return -EINVAL; @@ -127,10 +125,6 @@ static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c, if (!i2c->alert_data.irq) return -EINVAL; - type = irqd_get_trigger_type(irq_get_irq_data(i2c->alert_data.irq)); - i2c->alert_data.alert_edge_triggered = - (type & IRQ_TYPE_LEVEL_MASK) ? 1 : 0; - i2c->ara = i2c_setup_smbus_alert(&i2c->adap, &i2c->alert_data); if (!i2c->ara) return -ENODEV; diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index f9271c713d20..d4af2701ac6e 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -25,8 +25,6 @@ #include struct i2c_smbus_alert { - unsigned int alert_edge_triggered:1; - int irq; struct work_struct alert; struct i2c_client *ara; /* Alert response address */ }; @@ -72,13 +70,12 @@ static int smbus_do_alert(struct device *dev, void *addrp) * The alert IRQ handler needs to hand work off to a task which can issue * SMBus calls, because those sleeping calls can't be made in IRQ context. */ -static void smbus_alert(struct work_struct *work) +static irqreturn_t smbus_alert(int irq, void *d) { - struct i2c_smbus_alert *alert; + struct i2c_smbus_alert *alert = d; struct i2c_client *ara; unsigned short prev_addr = 0; /* Not a valid address */ - alert = container_of(work, struct i2c_smbus_alert, alert); ara = alert->ara; for (;;) { @@ -115,21 +112,17 @@ static void smbus_alert(struct work_struct *work) prev_addr = data.addr; } - /* We handled all alerts; re-enable level-triggered IRQs */ - if (!alert->alert_edge_triggered) - enable_irq(alert->irq); + return IRQ_HANDLED; } -static irqreturn_t smbalert_irq(int irq, void *d) +static void smbalert_work(struct work_struct *work) { - struct i2c_smbus_alert *alert = d; + struct i2c_smbus_alert *alert; + + alert = container_of(work, struct i2c_smbus_alert, alert); - /* Disable level-triggered IRQs until we handle them */ - if (!alert->alert_edge_triggered) - disable_irq_nosync(irq); + smbus_alert(0, alert); - schedule_work(&alert->alert); - return IRQ_HANDLED; } /* Setup SMBALERT# infrastructure */ @@ -139,28 +132,28 @@ static int smbalert_probe(struct i2c_client *ara, struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev); struct i2c_smbus_alert *alert; struct i2c_adapter *adapter = ara->adapter; - int res; + int res, irq; alert = devm_kzalloc(&ara->dev, sizeof(struct i2c_smbus_alert), GFP_KERNEL); if (!alert) return -ENOMEM; - alert->alert_edge_triggered = setup->alert_edge_triggered; - alert->irq = setup->irq; - INIT_WORK(&alert->alert, smbus_alert); + irq = setup->irq; + INIT_WORK(&alert->alert, smbalert_work); alert->ara = ara; - if (setup->irq > 0) { - res = devm_request_irq(&ara->dev, setup->irq, smbalert_irq, - 0, "smbus_alert", alert); + if (irq > 0) { + res = devm_request_threaded_irq(&ara->dev, irq, + NULL, smbus_alert, + IRQF_SHARED | IRQF_ONESHOT, + "smbus_alert", alert); if (res) return res; } i2c_set_clientdata(ara, alert); - dev_info(&adapter->dev, "supports SMBALERT#, %s trigger\n", - setup->alert_edge_triggered ? "edge" : "level"); + dev_info(&adapter->dev, "supports SMBALERT#\n"); return 0; } diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h index a1385023a29b..19efbd14e812 100644 --- a/include/linux/i2c-smbus.h +++ b/include/linux/i2c-smbus.h @@ -42,7 +42,6 @@ * properly set. */ struct i2c_smbus_alert_setup { - unsigned int alert_edge_triggered:1; int irq; }; -- cgit v1.2.3 From 69d17246ab255dda8e71c8d65396b4aa6121b7ad Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Thu, 24 Aug 2017 17:31:03 +0800 Subject: i2c: i2c-smbus: add of_i2c_setup_smbus_alert This commit adds of_i2c_setup_smbus_alert which allows the smbalert driver to be attached to an i2c adapter via the device tree. Signed-off-by: Phil Reid Acked-by: Rob Herring Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c.txt | 4 ++-- drivers/i2c/i2c-core-smbus.c | 22 ++++++++++++++++++++++ drivers/i2c/i2c-smbus.c | 10 +++++++++- include/linux/i2c-smbus.h | 9 +++++++++ 4 files changed, 42 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index cee9d5055fa2..11263982470e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -59,8 +59,8 @@ wants to support one of the below features, it should adapt the bindings below. interrupts used by the device. - interrupt-names - "irq" and "wakeup" names are recognized by I2C core, other names are - left to individual drivers. + "irq", "wakeup" and "smbus_alert" names are recognized by I2C core, + other names are left to individual drivers. - host-notify device uses SMBus host notify protocol instead of interrupt line. diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index 7f3ec02f085a..4bb9927afd01 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -625,3 +625,25 @@ struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter, return i2c_new_device(adapter, &ara_board_info); } EXPORT_SYMBOL_GPL(i2c_setup_smbus_alert); + +#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF) +int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter) +{ + struct i2c_client *client; + int irq; + + irq = of_property_match_string(adapter->dev.of_node, "interrupt-names", + "smbus_alert"); + if (irq == -EINVAL || irq == -ENODATA) + return 0; + else if (irq < 0) + return irq; + + client = i2c_setup_smbus_alert(adapter, NULL); + if (!client) + return -ENODEV; + + return 0; +} +EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert); +#endif diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index d0bb0358b578..5a1dd7f13bac 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -139,7 +140,14 @@ static int smbalert_probe(struct i2c_client *ara, if (!alert) return -ENOMEM; - irq = setup->irq; + if (setup) { + irq = setup->irq; + } else { + irq = of_irq_get_byname(adapter->dev.of_node, "smbus_alert"); + if (irq <= 0) + return irq; + } + INIT_WORK(&alert->alert, smbalert_work); alert->ara = ara; diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h index 19efbd14e812..fb0e040b1abb 100644 --- a/include/linux/i2c-smbus.h +++ b/include/linux/i2c-smbus.h @@ -49,4 +49,13 @@ struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter, struct i2c_smbus_alert_setup *setup); int i2c_handle_smbus_alert(struct i2c_client *ara); +#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF) +int of_i2c_setup_smbus_alert(struct i2c_adapter *adap); +#else +static inline int of_i2c_setup_smbus_alert(struct i2c_adapter *adap) +{ + return 0; +} +#endif + #endif /* _LINUX_I2C_SMBUS_H */ -- cgit v1.2.3 From b2e63555592f81331c8da3afaa607d8cf83e8138 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 10 Sep 2017 01:30:46 +0200 Subject: i2c: gpio: Convert to use descriptors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This converts the GPIO-based I2C-driver to using GPIO descriptors instead of the old global numberspace-based GPIO interface. We: - Convert the driver to unconditionally grab two GPIOs from the device by index 0 (SDA) and 1 (SCL) which will work fine with device tree and descriptor tables. The existing device trees will continue to work just like before, but without any roundtrip through the global numberspace. - Brutally convert all boardfiles still passing global GPIOs by registering descriptor tables associated with the devices instead so this driver does not need to keep supporting passing any GPIO numbers as platform data. There is no stepwise approach as elegant as this, I strongly prefer this big hammer over any antsteps for this conversion. This way the old GPIO numbers go away and NEVER COME BACK. Special conversion for the different boards utilizing I2C-GPIO: - EP93xx (arch/arm/mach-ep93xx): pretty straight forward as all boards were using the same two GPIO lines, just define these two in a lookup table for "i2c-gpio" and register these along with the device. None of them define any other platform data so just pass NULL as platform data. This platform selects GPIOLIB so all should be smooth. The pins appear on a gpiochip for bank "G" as pins 1 (SDA) and 0 (SCL). - IXP4 (arch/arm/mach-ixp4): descriptor tables have to be registered for each board separately. They all use "IXP4XX_GPIO_CHIP" so it is pretty straight forward. Most board define no other platform data than SCL/SDA so they can drop the #include of and assign NULL to platform data. The "goramo_mlr" (Goramo Multilink Router) board is a bit worrisome: it implements its own I2C bit-banging in the board file, and optionally registers an I2C serial port, but claims the same GPIO lines for itself in the board file. This is not going to work: there will be competition for the GPIO lines, so delete the optional extra I2C bus instead, no I2C devices are registered on it anyway, there are just hints that it may contain an EEPROM that may be accessed from userspace. This needs to be fixed up properly by the serial clock using I2C emulation so drop a note in the code. - KS8695 board acs5k (arch/arm/mach-ks8695/board-acs5.c) has some platform data in addition to the pins so it needs to be kept around sans GPIO lines. Its GPIO chip is named "KS8695" and the arch selects GPIOLIB. - PXA boards (arch/arm/mach-pxa/*) use some of the platform data so it needs to be preserved here. The viper board even registers two GPIO I2Cs. The gpiochip is named "gpio-pxa" and the arch selects GPIOLIB. - SA1100 Simpad (arch/arm/mach-sa1100/simpad.c) defines a GPIO I2C bus, and the arch selects GPIOLIB. - Blackfin boards (arch/blackfin/bf533 etc) for these I assume their I2C GPIOs refer to the local gpiochip defined in arch/blackfin/kernel/bfin_gpio.c names "BFIN-GPIO". The arch selects GPIOLIB. The boards get spiked with IF_ENABLED(I2C_GPIO) but that is a side effect of it being like that already (I would just have Kconfig select I2C_GPIO and get rid of them all.) I also delete any platform data set to 0 as it will get that value anyway from static declartions of platform data. - The MIPS selects GPIOLIB and the Alchemy machine is using two local GPIO chips, one of them has a GPIO I2C. We need to adjust the local offset from the global number space here. The ATH79 has a proper GPIO driver in drivers/gpio/gpio-ath79.c and AFAICT the chip is named "ath79-gpio" and the PB44 PCF857x expander spawns from this on GPIO 1 and 0. The latter board only use the platform data to specify pins so it can be cut altogether after this. - The MFD Silicon Motion SM501 is a special case. It dynamically spawns an I2C bus off the MFD using sm501_create_subdev(). We use an approach to dynamically create a machine descriptor table and attach this to the "SM501-LOW" or "SM501-HIGH" gpiochip. We use chip-local offsets to grab the right lines. We can get rid of two local static inline helpers as part of this refactoring. Cc: Steven Miao Cc: Ralf Baechle Cc: Guenter Roeck Cc: Ville Syrjälä Cc: Magnus Damm Cc: Ben Dooks Cc: Heiko Schocher Acked-by: Wu, Aaron Acked-by: Olof Johansson Acked-by: Lee Jones Acked-by: Ralf Baechle Tested-by: Geert Uytterhoeven Signed-off-by: Linus Walleij --- arch/arm/mach-ep93xx/core.c | 39 ++++---- arch/arm/mach-ep93xx/edb93xx.c | 15 +-- arch/arm/mach-ep93xx/include/mach/platform.h | 4 +- arch/arm/mach-ep93xx/simone.c | 12 +-- arch/arm/mach-ep93xx/snappercl15.c | 12 +-- arch/arm/mach-ep93xx/vision_ep9307.c | 7 +- arch/arm/mach-ixp4xx/avila-setup.c | 17 +++- arch/arm/mach-ixp4xx/dsmg600-setup.c | 16 +++- arch/arm/mach-ixp4xx/fsg-setup.c | 16 +++- arch/arm/mach-ixp4xx/goramo_mlr.c | 24 ++--- arch/arm/mach-ixp4xx/ixdp425-setup.c | 16 +++- arch/arm/mach-ixp4xx/nas100d-setup.c | 16 +++- arch/arm/mach-ixp4xx/nslu2-setup.c | 16 +++- arch/arm/mach-ks8695/board-acs5k.c | 13 ++- arch/arm/mach-pxa/palmz72.c | 12 ++- arch/arm/mach-pxa/viper.c | 27 +++++- arch/arm/mach-sa1100/simpad.c | 12 ++- arch/blackfin/mach-bf533/boards/blackstamp.c | 19 +++- arch/blackfin/mach-bf533/boards/ezkit.c | 18 +++- arch/blackfin/mach-bf533/boards/stamp.c | 18 +++- arch/blackfin/mach-bf561/boards/ezkit.c | 18 +++- arch/mips/alchemy/board-gpr.c | 19 +++- arch/mips/ath79/mach-pb44.c | 16 +++- drivers/i2c/busses/i2c-gpio.c | 134 +++++++++++++-------------- drivers/mfd/sm501.c | 49 +++++----- include/linux/i2c-gpio.h | 4 - 26 files changed, 327 insertions(+), 242 deletions(-) (limited to 'include') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index f53c61813998..7e99fe829ad1 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include #include @@ -320,42 +320,45 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) /************************************************************************* * EP93xx i2c peripheral handling *************************************************************************/ -static struct i2c_gpio_platform_data ep93xx_i2c_data; + +/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */ +static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + /* Use local offsets on gpiochip/port "G" */ + GPIO_LOOKUP_IDX("G", 1, NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("G", 0, NULL, 1, GPIO_ACTIVE_HIGH), + }, +}; static struct platform_device ep93xx_i2c_device = { .name = "i2c-gpio", .id = 0, .dev = { - .platform_data = &ep93xx_i2c_data, + .platform_data = NULL, }, }; /** * ep93xx_register_i2c - Register the i2c platform device. - * @data: platform specific i2c-gpio configuration (__initdata) * @devices: platform specific i2c bus device information (__initdata) * @num: the number of devices on the i2c bus */ -void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, - struct i2c_board_info *devices, int num) +void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num) { /* - * Set the EEPROM interface pin drive type control. - * Defines the driver type for the EECLK and EEDAT pins as either - * open drain, which will require an external pull-up, or a normal - * CMOS driver. + * FIXME: this just sets the two pins as non-opendrain, as no + * platforms tries to do that anyway. Flag the applicable lines + * as open drain in the GPIO_LOOKUP above and the driver or + * gpiolib will handle open drain/open drain emulation as need + * be. Right now i2c-gpio emulates open drain which is not + * optimal. */ - if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT) - pr_warning("sda != EEDAT, open drain has no effect\n"); - if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK) - pr_warning("scl != EECLK, open drain has no effect\n"); - - __raw_writel((data->sda_is_open_drain << 1) | - (data->scl_is_open_drain << 0), + __raw_writel((0 << 1) | (0 << 0), EP93XX_GPIO_EEDRIVE); - ep93xx_i2c_data = *data; i2c_register_board_info(0, devices, num); + gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table); platform_device_register(&ep93xx_i2c_device); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 7a7f280b07d7..8e89ec8b6f0f 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include @@ -61,14 +60,6 @@ static struct ep93xx_eth_data __initdata edb93xx_eth_data = { /************************************************************************* * EDB93xx i2c peripheral handling *************************************************************************/ -static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, /* default to 100 kHz */ - .timeout = 0, /* default to 100 ms */ -}; static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = { { @@ -86,13 +77,11 @@ static void __init edb93xx_register_i2c(void) { if (machine_is_edb9302a() || machine_is_edb9307a() || machine_is_edb9315a()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data, - edb93xxa_i2c_board_info, + ep93xx_register_i2c(edb93xxa_i2c_board_info, ARRAY_SIZE(edb93xxa_i2c_board_info)); } else if (machine_is_edb9302() || machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data, - edb93xx_i2c_board_info, + ep93xx_register_i2c(edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); } } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index db0839691ef5..a686fd6caee1 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -7,7 +7,6 @@ #include struct device; -struct i2c_gpio_platform_data; struct i2c_board_info; struct spi_board_info; struct platform_device; @@ -36,8 +35,7 @@ void ep93xx_register_flash(unsigned int width, resource_size_t start, resource_size_t size); void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); -void ep93xx_register_i2c(struct i2c_gpio_platform_data *data, - struct i2c_board_info *devices, int num); +void ep93xx_register_i2c(struct i2c_board_info *devices, int num); void ep93xx_register_spi(struct ep93xx_spi_info *info, struct spi_board_info *devices, int num); void ep93xx_register_fb(struct ep93xxfb_mach_info *data); diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index c7a40f245892..e61f3dee24c2 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -129,15 +128,6 @@ static struct ep93xx_spi_info simone_spi_info __initdata = { .use_dma = 1, }; -static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, - .timeout = 0, -}; - static struct i2c_board_info __initdata simone_i2c_board_info[] = { { I2C_BOARD_INFO("ds1337", 0x68), @@ -161,7 +151,7 @@ static void __init simone_init_machine(void) ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M); ep93xx_register_eth(&simone_eth_data, 1); ep93xx_register_fb(&simone_fb_info); - ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, + ep93xx_register_i2c(simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); ep93xx_register_spi(&simone_spi_info, simone_spi_devices, ARRAY_SIZE(simone_spi_devices)); diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 8b29398f4dc7..45940c1d7787 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include @@ -127,15 +126,6 @@ static struct ep93xx_eth_data __initdata snappercl15_eth_data = { .phy_id = 1, }; -static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, - .timeout = 0, -}; - static struct i2c_board_info __initdata snappercl15_i2c_data[] = { { /* Audio codec */ @@ -161,7 +151,7 @@ static void __init snappercl15_init_machine(void) { ep93xx_init_devices(); ep93xx_register_eth(&snappercl15_eth_data, 1); - ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data, + ep93xx_register_i2c(snappercl15_i2c_data, ARRAY_SIZE(snappercl15_i2c_data)); ep93xx_register_fb(&snappercl15_fb_info); snappercl15_register_audio(); diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 1daf9441058c..5a0b6187990a 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -144,10 +143,6 @@ static struct pca953x_platform_data pca953x_77_gpio_data = { /************************************************************************* * I2C Bus *************************************************************************/ -static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .scl_pin = EP93XX_GPIO_LINE_EECLK, -}; static struct i2c_board_info vision_i2c_info[] __initdata = { { @@ -289,7 +284,7 @@ static void __init vision_init_machine(void) vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); - ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, + ep93xx_register_i2c(vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, ARRAY_SIZE(vision_spi_board_info)); diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 6beec150c060..72122b5e7f28 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include @@ -49,16 +49,21 @@ static struct platform_device avila_flash = { .resource = &avila_flash_resource, }; -static struct i2c_gpio_platform_data avila_i2c_gpio_data = { - .sda_pin = AVILA_SDA_PIN, - .scl_pin = AVILA_SCL_PIN, +static struct gpiod_lookup_table avila_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN, + NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SCL_PIN, + NULL, 1, GPIO_ACTIVE_HIGH), + }, }; static struct platform_device avila_i2c_gpio = { .name = "i2c-gpio", .id = 0, .dev = { - .platform_data = &avila_i2c_gpio_data, + .platform_data = NULL, }, }; @@ -147,6 +152,8 @@ static void __init avila_init(void) avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + gpiod_add_lookup_table(&avila_i2c_gpiod_table); + platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices)); avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1); diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index b3bd0e137f6d..68ccd669051b 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include @@ -68,16 +68,21 @@ static struct platform_device dsmg600_flash = { .resource = &dsmg600_flash_resource, }; -static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = { - .sda_pin = DSMG600_SDA_PIN, - .scl_pin = DSMG600_SCL_PIN, +static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN, + NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SCL_PIN, + NULL, 1, GPIO_ACTIVE_HIGH), + }, }; static struct platform_device dsmg600_i2c_gpio = { .name = "i2c-gpio", .id = 0, .dev = { - .platform_data = &dsmg600_i2c_gpio_data, + .platform_data = NULL, }, }; @@ -269,6 +274,7 @@ static void __init dsmg600_init(void) dsmg600_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + gpiod_add_lookup_table(&dsmg600_i2c_gpiod_table); i2c_register_board_info(0, dsmg600_i2c_board_info, ARRAY_SIZE(dsmg600_i2c_board_info)); diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 5c4b0c4a1b37..a0350ad15175 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include #include @@ -54,16 +54,21 @@ static struct platform_device fsg_flash = { .resource = &fsg_flash_resource, }; -static struct i2c_gpio_platform_data fsg_i2c_gpio_data = { - .sda_pin = FSG_SDA_PIN, - .scl_pin = FSG_SCL_PIN, +static struct gpiod_lookup_table fsg_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SDA_PIN, + NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SCL_PIN, + NULL, 1, GPIO_ACTIVE_HIGH), + }, }; static struct platform_device fsg_i2c_gpio = { .name = "i2c-gpio", .id = 0, .dev = { - .platform_data = &fsg_i2c_gpio_data, + .platform_data = NULL, }, }; @@ -196,6 +201,7 @@ static void __init fsg_init(void) /* Configure CS2 for operation, 8bit and writable */ *IXP4XX_EXP_CS2 = 0xbfff0002; + gpiod_add_lookup_table(&fsg_i2c_gpiod_table); i2c_register_board_info(0, fsg_i2c_board_info, ARRAY_SIZE(fsg_i2c_board_info)); diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index 80bd9d6d04de..f1529aa3f8e2 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -6,7 +6,6 @@ #include #include #include -#include #include #include #include @@ -78,6 +77,12 @@ static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */; static u8 control_value; +/* + * FIXME: this is reimplementing I2C bit-bangining. Move this + * over to using driver/i2c/busses/i2c-gpio.c like all other boards + * and register proper I2C device(s) on the bus for this. (See + * other IXP4xx boards for examples.) + */ static void set_scl(u8 value) { gpio_set_value(GPIO_SCL, !!value); @@ -216,20 +221,6 @@ static struct platform_device device_flash = { .resource = &flash_resource, }; - -/* I^2C interface */ -static struct i2c_gpio_platform_data i2c_data = { - .sda_pin = GPIO_SDA, - .scl_pin = GPIO_SCL, -}; - -static struct platform_device device_i2c = { - .name = "i2c-gpio", - .id = 0, - .dev = { .platform_data = &i2c_data }, -}; - - /* IXP425 2 UART ports */ static struct resource uart_resources[] = { { @@ -411,9 +402,6 @@ static void __init gmlr_init(void) if (hw_bits & CFG_HW_HAS_HSS1) device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */ - if (hw_bits & CFG_HW_HAS_EEPROM) - device_tab[devices++] = &device_i2c; /* max index 6 */ - gpio_request(GPIO_SCL, "SCL/clock"); gpio_request(GPIO_SDA, "SDA/data"); gpio_request(GPIO_STR, "strobe"); diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 93b89291c06b..8937263cec4a 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include @@ -122,16 +122,21 @@ static struct platform_device ixdp425_flash_nand = { }; #endif /* CONFIG_MTD_NAND_PLATFORM */ -static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = { - .sda_pin = IXDP425_SDA_PIN, - .scl_pin = IXDP425_SCL_PIN, +static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN, + NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SCL_PIN, + NULL, 1, GPIO_ACTIVE_HIGH), + }, }; static struct platform_device ixdp425_i2c_gpio = { .name = "i2c-gpio", .id = 0, .dev = { - .platform_data = &ixdp425_i2c_gpio_data, + .platform_data = NULL, }, }; @@ -245,6 +250,7 @@ static void __init ixdp425_init(void) ixdp425_uart_data[1].flags = 0; } + gpiod_add_lookup_table(&ixdp425_i2c_gpiod_table); platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices)); } diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 4e0f762bc651..612ec8c63456 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include #include @@ -100,16 +100,21 @@ static struct platform_device nas100d_leds = { .dev.platform_data = &nas100d_led_data, }; -static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = { - .sda_pin = NAS100D_SDA_PIN, - .scl_pin = NAS100D_SCL_PIN, +static struct gpiod_lookup_table nas100d_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SDA_PIN, + NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SCL_PIN, + NULL, 1, GPIO_ACTIVE_HIGH), + }, }; static struct platform_device nas100d_i2c_gpio = { .name = "i2c-gpio", .id = 0, .dev = { - .platform_data = &nas100d_i2c_gpio_data, + .platform_data = NULL, }, }; @@ -280,6 +285,7 @@ static void __init nas100d_init(void) nas100d_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + gpiod_add_lookup_table(&nas100d_i2c_gpiod_table); i2c_register_board_info(0, nas100d_i2c_board_info, ARRAY_SIZE(nas100d_i2c_board_info)); diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 88c025f52d8d..13afb03b50fa 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include #include @@ -68,9 +68,14 @@ static struct platform_device nslu2_flash = { .resource = &nslu2_flash_resource, }; -static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = { - .sda_pin = NSLU2_SDA_PIN, - .scl_pin = NSLU2_SCL_PIN, +static struct gpiod_lookup_table nslu2_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN, + NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SCL_PIN, + NULL, 1, GPIO_ACTIVE_HIGH), + }, }; static struct i2c_board_info __initdata nslu2_i2c_board_info [] = { @@ -115,7 +120,7 @@ static struct platform_device nslu2_i2c_gpio = { .name = "i2c-gpio", .id = 0, .dev = { - .platform_data = &nslu2_i2c_gpio_data, + .platform_data = NULL, }, }; @@ -250,6 +255,7 @@ static void __init nslu2_init(void) nslu2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + gpiod_add_lookup_table(&nslu2_i2c_gpiod_table); i2c_register_board_info(0, nslu2_i2c_board_info, ARRAY_SIZE(nslu2_i2c_board_info)); diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index e4d709c8ed32..f034724e01e1 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -16,7 +16,7 @@ #include #include #include - +#include #include #include #include @@ -38,9 +38,15 @@ #include "generic.h" +static struct gpiod_lookup_table acs5k_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("KS8695", 4, NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("KS8695", 5, NULL, 1, GPIO_ACTIVE_HIGH), + }, +}; + static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = { - .sda_pin = 4, - .scl_pin = 5, .udelay = 10, }; @@ -95,6 +101,7 @@ static struct i2c_board_info acs5k_i2c_devs[] __initdata = { static void acs5k_i2c_init(void) { /* The gpio interface */ + gpiod_add_lookup_table(&acs5k_i2c_gpiod_table); platform_device_register(&acs5k_i2c_device); /* I2C devices */ i2c_register_board_info(0, acs5k_i2c_devs, diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 29630061e700..94f75632c007 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -320,9 +321,15 @@ static struct soc_camera_link palmz72_iclink = { .flags = SOCAM_DATAWIDTH_8, }; +static struct gpiod_lookup_table palmz72_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-pxa", 117, NULL, 1, GPIO_ACTIVE_HIGH), + }, +}; + static struct i2c_gpio_platform_data palmz72_i2c_bus_data = { - .sda_pin = 118, - .scl_pin = 117, .udelay = 10, .timeout = 100, }; @@ -369,6 +376,7 @@ static void __init palmz72_camera_init(void) { palmz72_cam_gpio_init(); pxa_set_camera_info(&palmz72_pxacamera_platform_data); + gpiod_add_lookup_table(&palmz72_i2c_gpiod_table); platform_device_register(&palmz72_i2c_bus_device); platform_device_register(&palmz72_camera); } diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 8e89d91b206b..a680742bee2b 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -458,9 +459,17 @@ static struct platform_device smc91x_device = { }; /* i2c */ +static struct gpiod_lookup_table viper_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO, + NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SCL_GPIO, + NULL, 1, GPIO_ACTIVE_HIGH), + }, +}; + static struct i2c_gpio_platform_data i2c_bus_data = { - .sda_pin = VIPER_RTC_I2C_SDA_GPIO, - .scl_pin = VIPER_RTC_I2C_SCL_GPIO, .udelay = 10, .timeout = HZ, }; @@ -779,12 +788,20 @@ static int __init viper_tpm_setup(char *str) __setup("tpm=", viper_tpm_setup); +struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO, + NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SCL_GPIO, + NULL, 1, GPIO_ACTIVE_HIGH), + }, +}; + static void __init viper_tpm_init(void) { struct platform_device *tpm_device; struct i2c_gpio_platform_data i2c_tpm_data = { - .sda_pin = VIPER_TPM_I2C_SDA_GPIO, - .scl_pin = VIPER_TPM_I2C_SCL_GPIO, .udelay = 10, .timeout = HZ, }; @@ -794,6 +811,7 @@ static void __init viper_tpm_init(void) if (!viper_tpm) return; + gpiod_add_lookup_table(&viper_tpm_i2c_gpiod_table); tpm_device = platform_device_alloc("i2c-gpio", 2); if (tpm_device) { if (!platform_device_add_data(tpm_device, @@ -943,6 +961,7 @@ static void __init viper_init(void) smc91x_device.num_resources--; pxa_set_i2c_info(NULL); + gpiod_add_lookup_table(&viper_i2c_gpiod_table); pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup)); platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs)); diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index bb3ca9c763de..c6e7e6d8733a 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -323,9 +324,15 @@ static struct platform_device simpad_gpio_leds = { /* * i2c */ +static struct gpiod_lookup_table simpad_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("gpio", GPIO_GPIO21, NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio", GPIO_GPIO25, NULL, 1, GPIO_ACTIVE_HIGH), + }, +}; + static struct i2c_gpio_platform_data simpad_i2c_data = { - .sda_pin = GPIO_GPIO21, - .scl_pin = GPIO_GPIO25, .udelay = 10, .timeout = HZ, }; @@ -380,6 +387,7 @@ static int __init simpad_init(void) ARRAY_SIZE(simpad_flash_resources)); sa11x0_register_mcp(&simpad_mcp_data); + gpiod_add_lookup_table(&simpad_i2c_gpiod_table); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if(ret) printk(KERN_WARNING "simpad: Unable to register mq200 framebuffer device"); diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 0ccf0cf4daaf..d801ca5ca6c4 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -362,11 +363,17 @@ static struct platform_device bfin_device_gpiokeys = { #if IS_ENABLED(CONFIG_I2C_GPIO) #include +static struct gpiod_lookup_table bfin_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF8, NULL, 0, + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF9, NULL, 1, + GPIO_ACTIVE_HIGH), + }, +}; + static struct i2c_gpio_platform_data i2c_gpio_data = { - .sda_pin = GPIO_PF8, - .scl_pin = GPIO_PF9, - .sda_is_open_drain = 0, - .scl_is_open_drain = 0, .udelay = 40, }; /* This hasn't actually been used these pins * are (currently) free pins on the expansion connector */ @@ -462,7 +469,9 @@ static int __init blackstamp_init(void) int ret; printk(KERN_INFO "%s(): registering device resources\n", __func__); - +#if IS_ENABLED(CONFIG_I2C_GPIO) + gpiod_add_lookup_table(&bfin_i2c_gpiod_table); +#endif i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 3625e9eaa8a8..463a72358b0e 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -19,6 +19,7 @@ #endif #include #include +#include #include #include #include @@ -390,11 +391,17 @@ static struct platform_device bfin_device_gpiokeys = { #if IS_ENABLED(CONFIG_I2C_GPIO) #include +static struct gpiod_lookup_table bfin_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF1, NULL, 0, + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF0, NULL, 1, + GPIO_ACTIVE_HIGH), + }, +}; + static struct i2c_gpio_platform_data i2c_gpio_data = { - .sda_pin = GPIO_PF1, - .scl_pin = GPIO_PF0, - .sda_is_open_drain = 0, - .scl_is_open_drain = 0, .udelay = 40, }; @@ -516,6 +523,9 @@ static struct platform_device *ezkit_devices[] __initdata = { static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); +#if IS_ENABLED(CONFIG_I2C_GPIO) + gpiod_add_lookup_table(&bfin_i2c_gpiod_table); +#endif platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); i2c_register_board_info(0, bfin_i2c_board_info, diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 23eada79439c..d2479359adb7 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -512,11 +513,17 @@ static struct platform_device bfin_device_gpiokeys = { #if IS_ENABLED(CONFIG_I2C_GPIO) #include +static struct gpiod_lookup_table bfin_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF2, NULL, 0, + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF3, NULL, 1, + GPIO_ACTIVE_HIGH), + }, +}; + static struct i2c_gpio_platform_data i2c_gpio_data = { - .sda_pin = GPIO_PF2, - .scl_pin = GPIO_PF3, - .sda_is_open_drain = 0, - .scl_is_open_drain = 0, .udelay = 10, }; @@ -848,6 +855,9 @@ static int __init stamp_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); +#if IS_ENABLED(CONFIG_I2C_GPIO) + gpiod_add_lookup_table(&bfin_i2c_gpiod_table); +#endif i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 57d1c43726d9..72f757ebaa84 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -379,11 +380,17 @@ static struct platform_device bfin_device_gpiokeys = { #if IS_ENABLED(CONFIG_I2C_GPIO) #include +static struct gpiod_lookup_table bfin_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF1, NULL, 0, + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF0, NULL, 1, + GPIO_ACTIVE_HIGH), + }, +}; + static struct i2c_gpio_platform_data i2c_gpio_data = { - .sda_pin = GPIO_PF1, - .scl_pin = GPIO_PF0, - .sda_is_open_drain = 0, - .scl_is_open_drain = 0, .udelay = 10, }; @@ -633,6 +640,9 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); +#if IS_ENABLED(CONFIG_I2C_GPIO) + gpiod_add_lookup_table(&bfin_i2c_gpiod_table); +#endif ret = platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); if (ret < 0) return ret; diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c index 6fb6b3faa158..daebc36e5ecb 100644 --- a/arch/mips/alchemy/board-gpr.c +++ b/arch/mips/alchemy/board-gpr.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -218,10 +219,23 @@ static struct platform_device gpr_led_devices = { /* * I2C */ +static struct gpiod_lookup_table gpr_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + /* + * This should be on "GPIO2" which has base at 200 so + * the global numbers 209 and 210 should correspond to + * local offsets 9 and 10. + */ + GPIO_LOOKUP_IDX("alchemy-gpio2", 9, NULL, 0, + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("alchemy-gpio2", 10, NULL, 1, + GPIO_ACTIVE_HIGH), + }, +}; + static struct i2c_gpio_platform_data gpr_i2c_data = { - .sda_pin = 209, .sda_is_open_drain = 1, - .scl_pin = 210, .scl_is_open_drain = 1, .udelay = 2, /* ~100 kHz */ .timeout = HZ, @@ -295,6 +309,7 @@ arch_initcall(gpr_pci_init); static int __init gpr_dev_init(void) { + gpiod_add_lookup_table(&gpr_i2c_gpiod_table); i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info)); return platform_add_devices(gpr_devices, ARRAY_SIZE(gpr_devices)); diff --git a/arch/mips/ath79/mach-pb44.c b/arch/mips/ath79/mach-pb44.c index be78298dffb4..a95409063847 100644 --- a/arch/mips/ath79/mach-pb44.c +++ b/arch/mips/ath79/mach-pb44.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include #include #include "machtypes.h" @@ -33,16 +33,21 @@ #define PB44_KEYS_POLL_INTERVAL 20 /* msecs */ #define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL) -static struct i2c_gpio_platform_data pb44_i2c_gpio_data = { - .sda_pin = PB44_GPIO_I2C_SDA, - .scl_pin = PB44_GPIO_I2C_SCL, +static struct gpiod_lookup_table pb44_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA, + NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SCL, + NULL, 1, GPIO_ACTIVE_HIGH), + }, }; static struct platform_device pb44_i2c_gpio_device = { .name = "i2c-gpio", .id = 0, .dev = { - .platform_data = &pb44_i2c_gpio_data, + .platform_data = NULL, } }; @@ -103,6 +108,7 @@ static struct ath79_spi_platform_data pb44_spi_data = { static void __init pb44_init(void) { + gpiod_add_lookup_table(&pb44_i2c_gpiod_table); i2c_register_board_info(0, pb44_i2c_board_info, ARRAY_SIZE(pb44_i2c_board_info)); platform_device_register(&pb44_i2c_gpio_device); diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 0ef8fcc6ac3a..b4664037eded 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -14,11 +14,12 @@ #include #include #include -#include +#include #include -#include struct i2c_gpio_private_data { + struct gpio_desc *sda; + struct gpio_desc *scl; struct i2c_adapter adap; struct i2c_algo_bit_data bit_data; struct i2c_gpio_platform_data pdata; @@ -27,12 +28,18 @@ struct i2c_gpio_private_data { /* Toggle SDA by changing the direction of the pin */ static void i2c_gpio_setsda_dir(void *data, int state) { - struct i2c_gpio_platform_data *pdata = data; - + struct i2c_gpio_private_data *priv = data; + + /* + * This is a way of saying "do not drive + * me actively high" which means emulating open drain. + * The right way to do this is for gpiolib to + * handle this, by the function below. + */ if (state) - gpio_direction_input(pdata->sda_pin); + gpiod_direction_input(priv->sda); else - gpio_direction_output(pdata->sda_pin, 0); + gpiod_direction_output(priv->sda, 0); } /* @@ -42,20 +49,20 @@ static void i2c_gpio_setsda_dir(void *data, int state) */ static void i2c_gpio_setsda_val(void *data, int state) { - struct i2c_gpio_platform_data *pdata = data; + struct i2c_gpio_private_data *priv = data; - gpio_set_value(pdata->sda_pin, state); + gpiod_set_value(priv->sda, state); } /* Toggle SCL by changing the direction of the pin. */ static void i2c_gpio_setscl_dir(void *data, int state) { - struct i2c_gpio_platform_data *pdata = data; + struct i2c_gpio_private_data *priv = data; if (state) - gpio_direction_input(pdata->scl_pin); + gpiod_direction_input(priv->scl); else - gpio_direction_output(pdata->scl_pin, 0); + gpiod_direction_output(priv->scl, 0); } /* @@ -66,44 +73,23 @@ static void i2c_gpio_setscl_dir(void *data, int state) */ static void i2c_gpio_setscl_val(void *data, int state) { - struct i2c_gpio_platform_data *pdata = data; + struct i2c_gpio_private_data *priv = data; - gpio_set_value(pdata->scl_pin, state); + gpiod_set_value(priv->scl, state); } static int i2c_gpio_getsda(void *data) { - struct i2c_gpio_platform_data *pdata = data; + struct i2c_gpio_private_data *priv = data; - return gpio_get_value(pdata->sda_pin); + return gpiod_get_value(priv->sda); } static int i2c_gpio_getscl(void *data) { - struct i2c_gpio_platform_data *pdata = data; + struct i2c_gpio_private_data *priv = data; - return gpio_get_value(pdata->scl_pin); -} - -static int of_i2c_gpio_get_pins(struct device_node *np, - unsigned int *sda_pin, unsigned int *scl_pin) -{ - if (of_gpio_count(np) < 2) - return -ENODEV; - - *sda_pin = of_get_gpio(np, 0); - *scl_pin = of_get_gpio(np, 1); - - if (*sda_pin == -EPROBE_DEFER || *scl_pin == -EPROBE_DEFER) - return -EPROBE_DEFER; - - if (!gpio_is_valid(*sda_pin) || !gpio_is_valid(*scl_pin)) { - pr_err("%pOF: invalid GPIO pins, sda=%d/scl=%d\n", - np, *sda_pin, *scl_pin); - return -ENODEV; - } - - return 0; + return gpiod_get_value(priv->scl); } static void of_i2c_gpio_get_props(struct device_node *np, @@ -130,64 +116,65 @@ static int i2c_gpio_probe(struct platform_device *pdev) struct i2c_gpio_platform_data *pdata; struct i2c_algo_bit_data *bit_data; struct i2c_adapter *adap; - unsigned int sda_pin, scl_pin; int ret; - /* First get the GPIO pins; if it fails, we'll defer the probe. */ - if (pdev->dev.of_node) { - ret = of_i2c_gpio_get_pins(pdev->dev.of_node, - &sda_pin, &scl_pin); - if (ret) - return ret; - } else { - if (!dev_get_platdata(&pdev->dev)) - return -ENXIO; - pdata = dev_get_platdata(&pdev->dev); - sda_pin = pdata->sda_pin; - scl_pin = pdata->scl_pin; - } + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; - ret = devm_gpio_request(&pdev->dev, sda_pin, "sda"); - if (ret) { + /* First get the GPIO pins; if it fails, we'll defer the probe. */ + priv->sda = devm_gpiod_get_index(&pdev->dev, NULL, 0, GPIOD_OUT_HIGH); + if (IS_ERR(priv->sda)) { + ret = PTR_ERR(priv->sda); + /* FIXME: hack in the old code, is this really necessary? */ if (ret == -EINVAL) - ret = -EPROBE_DEFER; /* Try again later */ + ret = -EPROBE_DEFER; return ret; } - ret = devm_gpio_request(&pdev->dev, scl_pin, "scl"); - if (ret) { + priv->scl = devm_gpiod_get_index(&pdev->dev, NULL, 1, GPIOD_OUT_LOW); + if (IS_ERR(priv->scl)) { + ret = PTR_ERR(priv->scl); + /* FIXME: hack in the old code, is this really necessary? */ if (ret == -EINVAL) - ret = -EPROBE_DEFER; /* Try again later */ + ret = -EPROBE_DEFER; return ret; } - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; adap = &priv->adap; bit_data = &priv->bit_data; pdata = &priv->pdata; if (pdev->dev.of_node) { - pdata->sda_pin = sda_pin; - pdata->scl_pin = scl_pin; of_i2c_gpio_get_props(pdev->dev.of_node, pdata); } else { - memcpy(pdata, dev_get_platdata(&pdev->dev), sizeof(*pdata)); + /* + * If all platform data settings are zero it is OK + * to not provide any platform data from the board. + */ + if (dev_get_platdata(&pdev->dev)) + memcpy(pdata, dev_get_platdata(&pdev->dev), + sizeof(*pdata)); } + /* + * FIXME: this is a hack emulating the open drain emulation + * that gpiolib can already do for us. Make all clients properly + * flag their lines as open drain and get rid of this property + * and the special callback. + */ if (pdata->sda_is_open_drain) { - gpio_direction_output(pdata->sda_pin, 1); + gpiod_direction_output(priv->sda, 1); bit_data->setsda = i2c_gpio_setsda_val; } else { - gpio_direction_input(pdata->sda_pin); + gpiod_direction_input(priv->sda); bit_data->setsda = i2c_gpio_setsda_dir; } if (pdata->scl_is_open_drain || pdata->scl_is_output_only) { - gpio_direction_output(pdata->scl_pin, 1); + gpiod_direction_output(priv->scl, 1); bit_data->setscl = i2c_gpio_setscl_val; } else { - gpio_direction_input(pdata->scl_pin); + gpiod_direction_input(priv->scl); bit_data->setscl = i2c_gpio_setscl_dir; } @@ -207,7 +194,7 @@ static int i2c_gpio_probe(struct platform_device *pdev) else bit_data->timeout = HZ / 10; /* 100 ms */ - bit_data->data = pdata; + bit_data->data = priv; adap->owner = THIS_MODULE; if (pdev->dev.of_node) @@ -227,8 +214,13 @@ static int i2c_gpio_probe(struct platform_device *pdev) platform_set_drvdata(pdev, priv); - dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n", - pdata->sda_pin, pdata->scl_pin, + /* + * FIXME: using global GPIO numbers is not helpful. If/when we + * get accessors to get the actual name of the GPIO line, + * from the descriptor, then provide that instead. + */ + dev_info(&pdev->dev, "using lines %u (SDA) and %u (SCL%s)\n", + desc_to_gpio(priv->sda), desc_to_gpio(priv->scl), pdata->scl_is_output_only ? ", no clock stretching" : ""); diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 40534352e574..4d40d013a412 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -1107,14 +1108,6 @@ static void sm501_gpio_remove(struct sm501_devdata *sm) kfree(gpio->regs_res); } -static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin) -{ - struct sm501_gpio *gpio = &sm->gpio; - int base = (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base; - - return (pin % 32) + base; -} - static inline int sm501_gpio_isregistered(struct sm501_devdata *sm) { return sm->gpio.registered; @@ -1129,11 +1122,6 @@ static inline void sm501_gpio_remove(struct sm501_devdata *sm) { } -static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin) -{ - return -1; -} - static inline int sm501_gpio_isregistered(struct sm501_devdata *sm) { return 0; @@ -1145,20 +1133,37 @@ static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm, { struct i2c_gpio_platform_data *icd; struct platform_device *pdev; + struct gpiod_lookup_table *lookup; pdev = sm501_create_subdev(sm, "i2c-gpio", 0, sizeof(struct i2c_gpio_platform_data)); if (!pdev) return -ENOMEM; - icd = dev_get_platdata(&pdev->dev); - - /* We keep the pin_sda and pin_scl fields relative in case the - * same platform data is passed to >1 SM501. - */ + /* Create a gpiod lookup using gpiochip-local offsets */ + lookup = devm_kzalloc(&pdev->dev, + sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup), + GFP_KERNEL); + lookup->dev_id = "i2c-gpio"; + if (iic->pin_sda < 32) + lookup->table[0].chip_label = "SM501-LOW"; + else + lookup->table[0].chip_label = "SM501-HIGH"; + lookup->table[0].chip_hwnum = iic->pin_sda % 32; + lookup->table[0].con_id = NULL; + lookup->table[0].idx = 0; + lookup->table[0].flags = GPIO_ACTIVE_HIGH; + if (iic->pin_scl < 32) + lookup->table[1].chip_label = "SM501-LOW"; + else + lookup->table[1].chip_label = "SM501-HIGH"; + lookup->table[1].chip_hwnum = iic->pin_scl % 32; + lookup->table[1].con_id = NULL; + lookup->table[1].idx = 1; + lookup->table[1].flags = GPIO_ACTIVE_HIGH; + gpiod_add_lookup_table(lookup); - icd->sda_pin = sm501_gpio_pin2nr(sm, iic->pin_sda); - icd->scl_pin = sm501_gpio_pin2nr(sm, iic->pin_scl); + icd = dev_get_platdata(&pdev->dev); icd->timeout = iic->timeout; icd->udelay = iic->udelay; @@ -1170,9 +1175,9 @@ static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm, pdev->id = iic->bus_num; - dev_info(sm->dev, "registering i2c-%d: sda=%d (%d), scl=%d (%d)\n", + dev_info(sm->dev, "registering i2c-%d: sda=%d, scl=%d\n", iic->bus_num, - icd->sda_pin, iic->pin_sda, icd->scl_pin, iic->pin_scl); + iic->pin_sda, iic->pin_scl); return sm501_register_device(sm, pdev); } diff --git a/include/linux/i2c-gpio.h b/include/linux/i2c-gpio.h index c1bcb1f1d73b..352c1426fd4d 100644 --- a/include/linux/i2c-gpio.h +++ b/include/linux/i2c-gpio.h @@ -12,8 +12,6 @@ /** * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio - * @sda_pin: GPIO pin ID to use for SDA - * @scl_pin: GPIO pin ID to use for SCL * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz * @timeout: clock stretching timeout in jiffies. If the slave keeps * SCL low for longer than this, the transfer will time out. @@ -26,8 +24,6 @@ * @scl_is_output_only: SCL output drivers cannot be turned off. */ struct i2c_gpio_platform_data { - unsigned int sda_pin; - unsigned int scl_pin; int udelay; int timeout; unsigned int sda_is_open_drain:1; -- cgit v1.2.3 From f926dfc112bc6cf41d7068ee5e3f261e13a5bec8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 10 Sep 2017 19:26:22 +0200 Subject: gpio: Make it possible for consumers to enforce open drain Some busses, like I2C, strictly need to have the line handled as open drain, i.e. not actively driven high. For this reason the i2c-gpio.c bit-banged I2C driver is reimplementing open drain handling outside of gpiolib. This is not very optimal. Instead make it possible for a consumer to explcitly express that the line must be handled as open drain instead of allowing local hacks papering over this issue. The descriptor tables, whether DT, ACPI or board files, should of course have flagged these lines as open drain. E.g.: enum gpio_lookup_flags GPIO_OPEN_DRAIN for a board file, or gpios = <&foo 42 GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN>; in a device tree using But more often than not, these descriptors are wrong. So we need to make it possible for consumers to enforce this open drain behaviour. We now have two new enumerated GPIO descriptor config flags: GPIOD_OUT_LOW_OPEN_DRAIN and GPIOD_OUT_HIGH_OPEN_DRAIN that will set up the lined enforced as open drain as output low or high, using open drain (if the driver supports it) or using open drain emulation (setting the line as input to drive it high) from the gpiolib core. Cc: linux-gpio@vger.kernel.org Tested-by: Geert Uytterhoeven Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 13 +++++++++++++ include/linux/gpio/consumer.h | 6 ++++++ 2 files changed, 19 insertions(+) (limited to 'include') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index eb80dac4e26a..c952ef1b2f46 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -3264,8 +3264,21 @@ int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id, if (lflags & GPIO_ACTIVE_LOW) set_bit(FLAG_ACTIVE_LOW, &desc->flags); + if (lflags & GPIO_OPEN_DRAIN) set_bit(FLAG_OPEN_DRAIN, &desc->flags); + else if (dflags & GPIOD_FLAGS_BIT_OPEN_DRAIN) { + /* + * This enforces open drain mode from the consumer side. + * This is necessary for some busses like I2C, but the lookup + * should *REALLY* have specified them as open drain in the + * first place, so print a little warning here. + */ + set_bit(FLAG_OPEN_DRAIN, &desc->flags); + gpiod_warn(desc, + "enforced open drain please flag it properly in DT/ACPI DSDT/board file\n"); + } + if (lflags & GPIO_OPEN_SOURCE) set_bit(FLAG_OPEN_SOURCE, &desc->flags); if (lflags & GPIO_SLEEP_MAY_LOOSE_VALUE) diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h index 8f702fcbe485..5f72a49d1aa3 100644 --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h @@ -28,6 +28,7 @@ struct gpio_descs { #define GPIOD_FLAGS_BIT_DIR_SET BIT(0) #define GPIOD_FLAGS_BIT_DIR_OUT BIT(1) #define GPIOD_FLAGS_BIT_DIR_VAL BIT(2) +#define GPIOD_FLAGS_BIT_OPEN_DRAIN BIT(3) /** * Optional flags that can be passed to one of gpiod_* to configure direction @@ -39,6 +40,11 @@ enum gpiod_flags { GPIOD_OUT_LOW = GPIOD_FLAGS_BIT_DIR_SET | GPIOD_FLAGS_BIT_DIR_OUT, GPIOD_OUT_HIGH = GPIOD_FLAGS_BIT_DIR_SET | GPIOD_FLAGS_BIT_DIR_OUT | GPIOD_FLAGS_BIT_DIR_VAL, + GPIOD_OUT_LOW_OPEN_DRAIN = GPIOD_FLAGS_BIT_DIR_SET | + GPIOD_FLAGS_BIT_DIR_OUT | GPIOD_FLAGS_BIT_OPEN_DRAIN, + GPIOD_OUT_HIGH_OPEN_DRAIN = GPIOD_FLAGS_BIT_DIR_SET | + GPIOD_FLAGS_BIT_DIR_OUT | GPIOD_FLAGS_BIT_DIR_VAL | + GPIOD_FLAGS_BIT_OPEN_DRAIN, }; #ifdef CONFIG_GPIOLIB -- cgit v1.2.3 From eb3b05fb0ff2cf0097e70b6c5e3afbe854a8deb7 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 4 Nov 2017 21:49:26 +0100 Subject: i2c: nuc900: remove platform_data, too Commit 7da62cb1853025 ("i2c: nuc900: remove driver") removed the driver, we should remove the platform_data as well. Signed-off-by: Wolfram Sang --- include/linux/platform_data/i2c-nuc900.h | 9 --------- 1 file changed, 9 deletions(-) delete mode 100644 include/linux/platform_data/i2c-nuc900.h (limited to 'include') diff --git a/include/linux/platform_data/i2c-nuc900.h b/include/linux/platform_data/i2c-nuc900.h deleted file mode 100644 index 9ffb12d06e91..000000000000 --- a/include/linux/platform_data/i2c-nuc900.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_ARCH_NUC900_I2C_H -#define __ASM_ARCH_NUC900_I2C_H - -struct nuc900_platform_i2c { - int bus_num; - unsigned long bus_freq; -}; - -#endif /* __ASM_ARCH_NUC900_I2C_H */ -- cgit v1.2.3