summaryrefslogtreecommitdiffstats
path: root/include/uapi
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-03-27 12:22:57 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-03-27 12:22:57 -0700
commit1a9df9e29c2afecf6e3089442d429b377279ca3c (patch)
tree609a39b5f4a3f5bdeb7031aac765e503b6d9d759 /include/uapi
parent14c741de93861749dfb60b4964028541f5c506ca (diff)
parent8c838f53e149871561a9261ac768a9c7071b43d0 (diff)
downloadlinux-1a9df9e29c2afecf6e3089442d429b377279ca3c.tar.bz2
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
Diffstat (limited to 'include/uapi')
-rw-r--r--include/uapi/linux/bpf.h188
1 files changed, 127 insertions, 61 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 3c38ac9a92a7..929c8e537a14 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -502,16 +502,6 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags)
- * Description
- * Push an element *value* in *map*. *flags* is one of:
- *
- * **BPF_EXIST**
- * If the queue/stack is full, the oldest element is removed to
- * make room for this.
- * Return
- * 0 on success, or a negative error in case of failure.
- *
* int bpf_probe_read(void *dst, u32 size, const void *src)
* Description
* For tracing programs, safely attempt to read *size* bytes from
@@ -1435,14 +1425,14 @@ union bpf_attr {
* u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx)
* Description
* Equivalent to bpf_get_socket_cookie() helper that accepts
- * *skb*, but gets socket from **struct bpf_sock_addr** contex.
+ * *skb*, but gets socket from **struct bpf_sock_addr** context.
* Return
* A 8-byte long non-decreasing number.
*
* u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx)
* Description
* Equivalent to bpf_get_socket_cookie() helper that accepts
- * *skb*, but gets socket from **struct bpf_sock_ops** contex.
+ * *skb*, but gets socket from **struct bpf_sock_ops** context.
* Return
* A 8-byte long non-decreasing number.
*
@@ -2098,52 +2088,52 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle)
+ * int bpf_rc_repeat(void *ctx)
* Description
* This helper is used in programs implementing IR decoding, to
- * report a successfully decoded key press with *scancode*,
- * *toggle* value in the given *protocol*. The scancode will be
- * translated to a keycode using the rc keymap, and reported as
- * an input key down event. After a period a key up event is
- * generated. This period can be extended by calling either
- * **bpf_rc_keydown**\ () again with the same values, or calling
- * **bpf_rc_repeat**\ ().
+ * report a successfully decoded repeat key message. This delays
+ * the generation of a key up event for previously generated
+ * key down event.
*
- * Some protocols include a toggle bit, in case the button was
- * released and pressed again between consecutive scancodes.
+ * Some IR protocols like NEC have a special IR message for
+ * repeating last button, for when a button is held down.
*
* The *ctx* should point to the lirc sample as passed into
* the program.
*
- * The *protocol* is the decoded protocol number (see
- * **enum rc_proto** for some predefined values).
- *
* This helper is only available is the kernel was compiled with
* the **CONFIG_BPF_LIRC_MODE2** configuration option set to
* "**y**".
* Return
* 0
*
- * int bpf_rc_repeat(void *ctx)
+ * int bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle)
* Description
* This helper is used in programs implementing IR decoding, to
- * report a successfully decoded repeat key message. This delays
- * the generation of a key up event for previously generated
- * key down event.
+ * report a successfully decoded key press with *scancode*,
+ * *toggle* value in the given *protocol*. The scancode will be
+ * translated to a keycode using the rc keymap, and reported as
+ * an input key down event. After a period a key up event is
+ * generated. This period can be extended by calling either
+ * **bpf_rc_keydown**\ () again with the same values, or calling
+ * **bpf_rc_repeat**\ ().
*
- * Some IR protocols like NEC have a special IR message for
- * repeating last button, for when a button is held down.
+ * Some protocols include a toggle bit, in case the button was
+ * released and pressed again between consecutive scancodes.
*
* The *ctx* should point to the lirc sample as passed into
* the program.
*
+ * The *protocol* is the decoded protocol number (see
+ * **enum rc_proto** for some predefined values).
+ *
* This helper is only available is the kernel was compiled with
* the **CONFIG_BPF_LIRC_MODE2** configuration option set to
* "**y**".
* Return
* 0
*
- * uint64_t bpf_skb_cgroup_id(struct sk_buff *skb)
+ * u64 bpf_skb_cgroup_id(struct sk_buff *skb)
* Description
* Return the cgroup v2 id of the socket associated with the *skb*.
* This is roughly similar to the **bpf_get_cgroup_classid**\ ()
@@ -2159,30 +2149,12 @@ union bpf_attr {
* Return
* The id is returned or 0 in case the id could not be retrieved.
*
- * u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level)
- * Description
- * Return id of cgroup v2 that is ancestor of cgroup associated
- * with the *skb* at the *ancestor_level*. The root cgroup is at
- * *ancestor_level* zero and each step down the hierarchy
- * increments the level. If *ancestor_level* == level of cgroup
- * associated with *skb*, then return value will be same as that
- * of **bpf_skb_cgroup_id**\ ().
- *
- * The helper is useful to implement policies based on cgroups
- * that are upper in hierarchy than immediate cgroup associated
- * with *skb*.
- *
- * The format of returned id and helper limitations are same as in
- * **bpf_skb_cgroup_id**\ ().
- * Return
- * The id is returned or 0 in case the id could not be retrieved.
- *
* u64 bpf_get_current_cgroup_id(void)
* Return
* A 64-bit integer containing the current cgroup id based
* on the cgroup within which the current task is running.
*
- * void* get_local_storage(void *map, u64 flags)
+ * void *bpf_get_local_storage(void *map, u64 flags)
* Description
* Get the pointer to the local storage area.
* The type and the size of the local storage is defined
@@ -2209,6 +2181,24 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
+ * u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level)
+ * Description
+ * Return id of cgroup v2 that is ancestor of cgroup associated
+ * with the *skb* at the *ancestor_level*. The root cgroup is at
+ * *ancestor_level* zero and each step down the hierarchy
+ * increments the level. If *ancestor_level* == level of cgroup
+ * associated with *skb*, then return value will be same as that
+ * of **bpf_skb_cgroup_id**\ ().
+ *
+ * The helper is useful to implement policies based on cgroups
+ * that are upper in hierarchy than immediate cgroup associated
+ * with *skb*.
+ *
+ * The format of returned id and helper limitations are same as in
+ * **bpf_skb_cgroup_id**\ ().
+ * Return
+ * The id is returned or 0 in case the id could not be retrieved.
+ *
* struct bpf_sock *bpf_sk_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags)
* Description
* Look for TCP socket matching *tuple*, optionally in a child
@@ -2289,6 +2279,16 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
+ * int bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags)
+ * Description
+ * Push an element *value* in *map*. *flags* is one of:
+ *
+ * **BPF_EXIST**
+ * If the queue/stack is full, the oldest element is
+ * removed to make room for this.
+ * Return
+ * 0 on success, or a negative error in case of failure.
+ *
* int bpf_map_pop_elem(struct bpf_map *map, void *value)
* Description
* Pop an element from *map*.
@@ -2343,29 +2343,94 @@ union bpf_attr {
* Return
* 0
*
+ * int bpf_spin_lock(struct bpf_spin_lock *lock)
+ * Description
+ * Acquire a spinlock represented by the pointer *lock*, which is
+ * stored as part of a value of a map. Taking the lock allows to
+ * safely update the rest of the fields in that value. The
+ * spinlock can (and must) later be released with a call to
+ * **bpf_spin_unlock**\ (\ *lock*\ ).
+ *
+ * Spinlocks in BPF programs come with a number of restrictions
+ * and constraints:
+ *
+ * * **bpf_spin_lock** objects are only allowed inside maps of
+ * types **BPF_MAP_TYPE_HASH** and **BPF_MAP_TYPE_ARRAY** (this
+ * list could be extended in the future).
+ * * BTF description of the map is mandatory.
+ * * The BPF program can take ONE lock at a time, since taking two
+ * or more could cause dead locks.
+ * * Only one **struct bpf_spin_lock** is allowed per map element.
+ * * When the lock is taken, calls (either BPF to BPF or helpers)
+ * are not allowed.
+ * * The **BPF_LD_ABS** and **BPF_LD_IND** instructions are not
+ * allowed inside a spinlock-ed region.
+ * * The BPF program MUST call **bpf_spin_unlock**\ () to release
+ * the lock, on all execution paths, before it returns.
+ * * The BPF program can access **struct bpf_spin_lock** only via
+ * the **bpf_spin_lock**\ () and **bpf_spin_unlock**\ ()
+ * helpers. Loading or storing data into the **struct
+ * bpf_spin_lock** *lock*\ **;** field of a map is not allowed.
+ * * To use the **bpf_spin_lock**\ () helper, the BTF description
+ * of the map value must be a struct and have **struct
+ * bpf_spin_lock** *anyname*\ **;** field at the top level.
+ * Nested lock inside another struct is not allowed.
+ * * The **struct bpf_spin_lock** *lock* field in a map value must
+ * be aligned on a multiple of 4 bytes in that value.
+ * * Syscall with command **BPF_MAP_LOOKUP_ELEM** does not copy
+ * the **bpf_spin_lock** field to user space.
+ * * Syscall with command **BPF_MAP_UPDATE_ELEM**, or update from
+ * a BPF program, do not update the **bpf_spin_lock** field.
+ * * **bpf_spin_lock** cannot be on the stack or inside a
+ * networking packet (it can only be inside of a map values).
+ * * **bpf_spin_lock** is available to root only.
+ * * Tracing programs and socket filter programs cannot use
+ * **bpf_spin_lock**\ () due to insufficient preemption checks
+ * (but this may change in the future).
+ * * **bpf_spin_lock** is not allowed in inner maps of map-in-map.
+ * Return
+ * 0
+ *
+ * int bpf_spin_unlock(struct bpf_spin_lock *lock)
+ * Description
+ * Release the *lock* previously locked by a call to
+ * **bpf_spin_lock**\ (\ *lock*\ ).
+ * Return
+ * 0
+ *
* struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk)
* Description
* This helper gets a **struct bpf_sock** pointer such
- * that all the fields in bpf_sock can be accessed.
+ * that all the fields in this **bpf_sock** can be accessed.
* Return
- * A **struct bpf_sock** pointer on success, or NULL in
+ * A **struct bpf_sock** pointer on success, or **NULL** in
* case of failure.
*
* struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk)
* Description
* This helper gets a **struct bpf_tcp_sock** pointer from a
* **struct bpf_sock** pointer.
- *
* Return
- * A **struct bpf_tcp_sock** pointer on success, or NULL in
+ * A **struct bpf_tcp_sock** pointer on success, or **NULL** in
* case of failure.
*
* int bpf_skb_ecn_set_ce(struct sk_buf *skb)
- * Description
- * Sets ECN of IP header to ce (congestion encountered) if
- * current value is ect (ECN capable). Works with IPv6 and IPv4.
- * Return
- * 1 if set, 0 if not set.
+ * Description
+ * Set ECN (Explicit Congestion Notification) field of IP header
+ * to **CE** (Congestion Encountered) if current value is **ECT**
+ * (ECN Capable Transport). Otherwise, do nothing. Works with IPv6
+ * and IPv4.
+ * Return
+ * 1 if the **CE** flag is set (either by the current helper call
+ * or because it was already present), 0 if it is not set.
+ *
+ * struct bpf_sock *bpf_get_listener_sock(struct bpf_sock *sk)
+ * Description
+ * Return a **struct bpf_sock** pointer in **TCP_LISTEN** state.
+ * **bpf_sk_release**\ () is unnecessary and not allowed.
+ * Return
+ * A **struct bpf_sock** pointer on success, or **NULL** in
+ * case of failure.
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
@@ -2465,7 +2530,8 @@ union bpf_attr {
FN(spin_unlock), \
FN(sk_fullsock), \
FN(tcp_sock), \
- FN(skb_ecn_set_ce),
+ FN(skb_ecn_set_ce), \
+ FN(get_listener_sock),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call