summaryrefslogtreecommitdiffstats
path: root/include/scsi/scsi_proto.h
diff options
context:
space:
mode:
authorBart Van Assche <bart.vanassche@sandisk.com>2015-05-08 10:07:18 +0200
committerJames Bottomley <JBottomley@Odin.com>2015-06-01 07:32:42 -0700
commitc5f1ac8b94bd10f97f5aa1a3279ad8e8bbc6311a (patch)
tree2702fb1198295c675cbb99573b1385472b6c7dbc /include/scsi/scsi_proto.h
parent2be2a98845e6742a96d48534294d2c5ba582e57f (diff)
downloadlinux-c5f1ac8b94bd10f97f5aa1a3279ad8e8bbc6311a.tar.bz2
Split SCSI header files
Move the constants that are used by both initiator and target drivers into the new header file <scsi/scsi_proto.h>. This change will allow to remove the initiator SCSI header include directives from most SCSI target source files in a later patch. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Diffstat (limited to 'include/scsi/scsi_proto.h')
-rw-r--r--include/scsi/scsi_proto.h281
1 files changed, 281 insertions, 0 deletions
diff --git a/include/scsi/scsi_proto.h b/include/scsi/scsi_proto.h
new file mode 100644
index 000000000000..a9fbf1b38e71
--- /dev/null
+++ b/include/scsi/scsi_proto.h
@@ -0,0 +1,281 @@
+/*
+ * This header file contains public constants and structures used by
+ * both the SCSI initiator and the SCSI target code.
+ *
+ * For documentation on the OPCODES, MESSAGES, and SENSE values,
+ * please consult the SCSI standard.
+ */
+
+#ifndef _SCSI_PROTO_H_
+#define _SCSI_PROTO_H_
+
+#include <linux/types.h>
+
+/*
+ * SCSI opcodes
+ */
+
+#define TEST_UNIT_READY 0x00
+#define REZERO_UNIT 0x01
+#define REQUEST_SENSE 0x03
+#define FORMAT_UNIT 0x04
+#define READ_BLOCK_LIMITS 0x05
+#define REASSIGN_BLOCKS 0x07
+#define INITIALIZE_ELEMENT_STATUS 0x07
+#define READ_6 0x08
+#define WRITE_6 0x0a
+#define SEEK_6 0x0b
+#define READ_REVERSE 0x0f
+#define WRITE_FILEMARKS 0x10
+#define SPACE 0x11
+#define INQUIRY 0x12
+#define RECOVER_BUFFERED_DATA 0x14
+#define MODE_SELECT 0x15
+#define RESERVE 0x16
+#define RELEASE 0x17
+#define COPY 0x18
+#define ERASE 0x19
+#define MODE_SENSE 0x1a
+#define START_STOP 0x1b
+#define RECEIVE_DIAGNOSTIC 0x1c
+#define SEND_DIAGNOSTIC 0x1d
+#define ALLOW_MEDIUM_REMOVAL 0x1e
+
+#define READ_FORMAT_CAPACITIES 0x23
+#define SET_WINDOW 0x24
+#define READ_CAPACITY 0x25
+#define READ_10 0x28
+#define WRITE_10 0x2a
+#define SEEK_10 0x2b
+#define POSITION_TO_ELEMENT 0x2b
+#define WRITE_VERIFY 0x2e
+#define VERIFY 0x2f
+#define SEARCH_HIGH 0x30
+#define SEARCH_EQUAL 0x31
+#define SEARCH_LOW 0x32
+#define SET_LIMITS 0x33
+#define PRE_FETCH 0x34
+#define READ_POSITION 0x34
+#define SYNCHRONIZE_CACHE 0x35
+#define LOCK_UNLOCK_CACHE 0x36
+#define READ_DEFECT_DATA 0x37
+#define MEDIUM_SCAN 0x38
+#define COMPARE 0x39
+#define COPY_VERIFY 0x3a
+#define WRITE_BUFFER 0x3b
+#define READ_BUFFER 0x3c
+#define UPDATE_BLOCK 0x3d
+#define READ_LONG 0x3e
+#define WRITE_LONG 0x3f
+#define CHANGE_DEFINITION 0x40
+#define WRITE_SAME 0x41
+#define UNMAP 0x42
+#define READ_TOC 0x43
+#define READ_HEADER 0x44
+#define GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define LOG_SELECT 0x4c
+#define LOG_SENSE 0x4d
+#define XDWRITEREAD_10 0x53
+#define MODE_SELECT_10 0x55
+#define RESERVE_10 0x56
+#define RELEASE_10 0x57
+#define MODE_SENSE_10 0x5a
+#define PERSISTENT_RESERVE_IN 0x5e
+#define PERSISTENT_RESERVE_OUT 0x5f
+#define VARIABLE_LENGTH_CMD 0x7f
+#define REPORT_LUNS 0xa0
+#define SECURITY_PROTOCOL_IN 0xa2
+#define MAINTENANCE_IN 0xa3
+#define MAINTENANCE_OUT 0xa4
+#define MOVE_MEDIUM 0xa5
+#define EXCHANGE_MEDIUM 0xa6
+#define READ_12 0xa8
+#define SERVICE_ACTION_OUT_12 0xa9
+#define WRITE_12 0xaa
+#define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */
+#define SERVICE_ACTION_IN_12 0xab
+#define WRITE_VERIFY_12 0xae
+#define VERIFY_12 0xaf
+#define SEARCH_HIGH_12 0xb0
+#define SEARCH_EQUAL_12 0xb1
+#define SEARCH_LOW_12 0xb2
+#define SECURITY_PROTOCOL_OUT 0xb5
+#define READ_ELEMENT_STATUS 0xb8
+#define SEND_VOLUME_TAG 0xb6
+#define WRITE_LONG_2 0xea
+#define EXTENDED_COPY 0x83
+#define RECEIVE_COPY_RESULTS 0x84
+#define ACCESS_CONTROL_IN 0x86
+#define ACCESS_CONTROL_OUT 0x87
+#define READ_16 0x88
+#define COMPARE_AND_WRITE 0x89
+#define WRITE_16 0x8a
+#define READ_ATTRIBUTE 0x8c
+#define WRITE_ATTRIBUTE 0x8d
+#define VERIFY_16 0x8f
+#define SYNCHRONIZE_CACHE_16 0x91
+#define WRITE_SAME_16 0x93
+#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
+#define SERVICE_ACTION_IN_16 0x9e
+#define SERVICE_ACTION_OUT_16 0x9f
+/* values for service action in */
+#define SAI_READ_CAPACITY_16 0x10
+#define SAI_GET_LBA_STATUS 0x12
+#define SAI_REPORT_REFERRALS 0x13
+/* values for VARIABLE_LENGTH_CMD service action codes
+ * see spc4r17 Section D.3.5, table D.7 and D.8 */
+#define VLC_SA_RECEIVE_CREDENTIAL 0x1800
+/* values for maintenance in */
+#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
+#define MI_REPORT_TARGET_PGS 0x0a
+#define MI_REPORT_ALIASES 0x0b
+#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
+#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
+#define MI_REPORT_PRIORITY 0x0e
+#define MI_REPORT_TIMESTAMP 0x0f
+#define MI_MANAGEMENT_PROTOCOL_IN 0x10
+/* value for MI_REPORT_TARGET_PGS ext header */
+#define MI_EXT_HDR_PARAM_FMT 0x20
+/* values for maintenance out */
+#define MO_SET_IDENTIFYING_INFORMATION 0x06
+#define MO_SET_TARGET_PGS 0x0a
+#define MO_CHANGE_ALIASES 0x0b
+#define MO_SET_PRIORITY 0x0e
+#define MO_SET_TIMESTAMP 0x0f
+#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
+/* values for variable length command */
+#define XDREAD_32 0x03
+#define XDWRITE_32 0x04
+#define XPWRITE_32 0x06
+#define XDWRITEREAD_32 0x07
+#define READ_32 0x09
+#define VERIFY_32 0x0a
+#define WRITE_32 0x0b
+#define WRITE_SAME_32 0x0d
+
+/* Values for T10/04-262r7 */
+#define ATA_16 0x85 /* 16-byte pass-thru */
+#define ATA_12 0xa1 /* 12-byte pass-thru */
+
+/* Vendor specific CDBs start here */
+#define VENDOR_SPECIFIC_CDB 0xc0
+
+/*
+ * SCSI command lengths
+ */
+
+#define SCSI_MAX_VARLEN_CDB_SIZE 260
+
+/* defined in T10 SCSI Primary Commands-2 (SPC2) */
+struct scsi_varlen_cdb_hdr {
+ __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
+ __u8 control;
+ __u8 misc[5];
+ __u8 additional_cdb_length; /* total cdb length - 8 */
+ __be16 service_action;
+ /* service specific data follows */
+};
+
+/*
+ * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
+ * T10/1561-D Revision 4 Draft dated 7th November 2002.
+ */
+#define SAM_STAT_GOOD 0x00
+#define SAM_STAT_CHECK_CONDITION 0x02
+#define SAM_STAT_CONDITION_MET 0x04
+#define SAM_STAT_BUSY 0x08
+#define SAM_STAT_INTERMEDIATE 0x10
+#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
+#define SAM_STAT_RESERVATION_CONFLICT 0x18
+#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
+#define SAM_STAT_TASK_SET_FULL 0x28
+#define SAM_STAT_ACA_ACTIVE 0x30
+#define SAM_STAT_TASK_ABORTED 0x40
+
+/*
+ * Status codes. These are deprecated as they are shifted 1 bit right
+ * from those found in the SCSI standards. This causes confusion for
+ * applications that are ported to several OSes. Prefer SAM Status codes
+ * above.
+ */
+
+#define GOOD 0x00
+#define CHECK_CONDITION 0x01
+#define CONDITION_GOOD 0x02
+#define BUSY 0x04
+#define INTERMEDIATE_GOOD 0x08
+#define INTERMEDIATE_C_GOOD 0x0a
+#define RESERVATION_CONFLICT 0x0c
+#define COMMAND_TERMINATED 0x11
+#define QUEUE_FULL 0x14
+#define ACA_ACTIVE 0x18
+#define TASK_ABORTED 0x20
+
+#define STATUS_MASK 0xfe
+
+/*
+ * SENSE KEYS
+ */
+
+#define NO_SENSE 0x00
+#define RECOVERED_ERROR 0x01
+#define NOT_READY 0x02
+#define MEDIUM_ERROR 0x03
+#define HARDWARE_ERROR 0x04
+#define ILLEGAL_REQUEST 0x05
+#define UNIT_ATTENTION 0x06
+#define DATA_PROTECT 0x07
+#define BLANK_CHECK 0x08
+#define COPY_ABORTED 0x0a
+#define ABORTED_COMMAND 0x0b
+#define VOLUME_OVERFLOW 0x0d
+#define MISCOMPARE 0x0e
+
+
+/*
+ * DEVICE TYPES
+ * Please keep them in 0x%02x format for $MODALIAS to work
+ */
+
+#define TYPE_DISK 0x00
+#define TYPE_TAPE 0x01
+#define TYPE_PRINTER 0x02
+#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
+#define TYPE_WORM 0x04 /* Treated as ROM by our system */
+#define TYPE_ROM 0x05
+#define TYPE_SCANNER 0x06
+#define TYPE_MOD 0x07 /* Magneto-optical disk -
+ * - treated as TYPE_DISK */
+#define TYPE_MEDIUM_CHANGER 0x08
+#define TYPE_COMM 0x09 /* Communications device */
+#define TYPE_RAID 0x0c
+#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
+#define TYPE_RBC 0x0e
+#define TYPE_OSD 0x11
+#define TYPE_ZBC 0x14
+#define TYPE_WLUN 0x1e /* well-known logical unit */
+#define TYPE_NO_LUN 0x7f
+
+/* SCSI protocols; these are taken from SPC-3 section 7.5 */
+enum scsi_protocol {
+ SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */
+ SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */
+ SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */
+ SCSI_PROTOCOL_SBP = 3, /* firewire */
+ SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */
+ SCSI_PROTOCOL_ISCSI = 5,
+ SCSI_PROTOCOL_SAS = 6,
+ SCSI_PROTOCOL_ADT = 7, /* Media Changers */
+ SCSI_PROTOCOL_ATA = 8,
+ SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
+};
+
+/*
+ * ScsiLun: 8 byte LUN.
+ */
+struct scsi_lun {
+ __u8 scsi_lun[8];
+};
+
+
+#endif /* _SCSI_PROTO_H_ */