summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorJoe Perches <joe@perches.com>2015-05-05 10:05:52 -0700
committerMichael Grzeschik <m.grzeschik@pengutronix.de>2015-09-23 08:44:23 +0200
commitf2f0a16bf89a1bbf2f774e060de85ffbd8fff162 (patch)
treec4ad5d369c053314bbe6f542dc04331518bd8b3d /drivers
parent5e7ef9134ce1b8ae8d686ce08b9746b32535964d (diff)
downloadlinux-f2f0a16bf89a1bbf2f774e060de85ffbd8fff162.tar.bz2
arcnet: Use network block comment style
Conformity can be useful. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/arcnet/arc-rawmode.c15
-rw-r--r--drivers/net/arcnet/arc-rimi.c17
-rw-r--r--drivers/net/arcnet/arcnet.c76
-rw-r--r--drivers/net/arcnet/capmode.c25
-rw-r--r--drivers/net/arcnet/com20020-isa.c3
-rw-r--r--drivers/net/arcnet/com20020.c3
-rw-r--r--drivers/net/arcnet/com20020_cs.c3
-rw-r--r--drivers/net/arcnet/com90io.c9
-rw-r--r--drivers/net/arcnet/com90xx.c3
-rw-r--r--drivers/net/arcnet/rfc1051.c19
-rw-r--r--drivers/net/arcnet/rfc1201.c54
11 files changed, 95 insertions, 132 deletions
diff --git a/drivers/net/arcnet/arc-rawmode.c b/drivers/net/arcnet/arc-rawmode.c
index 500b5bb2cff4..efdd8e95a2bf 100644
--- a/drivers/net/arcnet/arc-rawmode.c
+++ b/drivers/net/arcnet/arc-rawmode.c
@@ -123,8 +123,7 @@ static void rx(struct net_device *dev, int bufnum,
netif_rx(skb);
}
-/*
- * Create the ARCnet hard/soft headers for raw mode.
+/* Create the ARCnet hard/soft headers for raw mode.
* There aren't any soft headers in raw mode - not even the protocol id.
*/
static int build_header(struct sk_buff *skb, struct net_device *dev,
@@ -133,21 +132,19 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
int hdr_size = ARC_HDR_SIZE;
struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
- /*
- * Set the source hardware address.
+ /* Set the source hardware address.
*
* This is pretty pointless for most purposes, but it can help in
- * debugging. ARCnet does not allow us to change the source address in
- * the actual packet sent)
+ * debugging. ARCnet does not allow us to change the source address
+ * in the actual packet sent.
*/
pkt->hard.source = *dev->dev_addr;
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
- /*
- * FIXME: fill in the last byte of the dest ipaddr here to better
- * comply with RFC1051 in "noarp" mode.
+ /* FIXME: fill in the last byte of the dest ipaddr here
+ * to better comply with RFC1051 in "noarp" mode.
*/
pkt->hard.dest = 0;
return hdr_size;
diff --git a/drivers/net/arcnet/arc-rimi.c b/drivers/net/arcnet/arc-rimi.c
index 88e61574931c..c7ab23e8ec6a 100644
--- a/drivers/net/arcnet/arc-rimi.c
+++ b/drivers/net/arcnet/arc-rimi.c
@@ -76,8 +76,7 @@ static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offse
#define AINTMASK(msk) writeb((msk), _INTMASK)
#define SETCONF() writeb(lp->config, _CONFIG)
-/*
- * We cannot probe for a RIM I card; one reason is I don't know how to reset
+/* We cannot probe for a RIM I card; one reason is I don't know how to reset
* them. In fact, we can't even get their node ID automatically. So, we
* need to be passed a specific shmem address, IRQ, and node ID.
*/
@@ -97,8 +96,7 @@ static int __init arcrimi_probe(struct net_device *dev)
BUGLVL(D_NORMAL) printk("You need to specify your card's station ID!\n");
return -ENODEV;
}
- /*
- * Grab the memory region at mem_start for MIRROR_SIZE bytes.
+ /* Grab the memory region at mem_start for MIRROR_SIZE bytes.
* Later in arcrimi_found() the real size will be determined
* and this reserve will be released and the correct size
* will be taken.
@@ -131,9 +129,8 @@ static int check_mirror(unsigned long addr, size_t size)
return res;
}
-/*
- * Set up the struct net_device associated with this card. Called after
- * probing succeeds.
+/* Set up the struct net_device associated with this card.
+ * Called after probing succeeds.
*/
static int __init arcrimi_found(struct net_device *dev)
{
@@ -199,8 +196,7 @@ static int __init arcrimi_found(struct net_device *dev)
lp->hw.copy_to_card = arcrimi_copy_to_card;
lp->hw.copy_from_card = arcrimi_copy_from_card;
- /*
- * re-reserve the memory region - arcrimi_probe() alloced this reqion
+ /* re-reserve the memory region - arcrimi_probe() alloced this reqion
* but didn't know the real size. Free that region and then re-get
* with the correct size. There is a VERY slim chance this could
* fail.
@@ -243,8 +239,7 @@ err_free_irq:
return -EIO;
}
-/*
- * Do a hardware reset on the card, and set up necessary registers.
+/* Do a hardware reset on the card, and set up necessary registers.
*
* This should be called as little as possible, because it disrupts the
* token on the network (causes a RECON) and requires a significant delay.
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index d70efda777c5..605b4a7abecc 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -63,8 +63,7 @@ static int null_prepare_tx(struct net_device *dev, struct archdr *pkt,
static void arcnet_rx(struct net_device *dev, int bufnum);
-/*
- * one ArcProto per possible proto ID. None of the elements of
+/* one ArcProto per possible proto ID. None of the elements of
* arc_proto_map are allowed to be NULL; they will get set to
* arc_proto_default instead. It also must not be NULL; if you would like
* to set it to NULL, set it to &arc_proto_null instead.
@@ -149,9 +148,7 @@ static void __exit arcnet_exit(void)
module_init(arcnet_init);
module_exit(arcnet_exit);
-/*
- * Dump the contents of an sk_buff
- */
+/* Dump the contents of an sk_buff */
#if ARCNET_DEBUG_MAX & D_SKB
void arcnet_dump_skb(struct net_device *dev,
struct sk_buff *skb, char *desc)
@@ -167,9 +164,7 @@ void arcnet_dump_skb(struct net_device *dev,
EXPORT_SYMBOL(arcnet_dump_skb);
#endif
-/*
- * Dump the contents of an ARCnet buffer
- */
+/* Dump the contents of an ARCnet buffer */
#if (ARCNET_DEBUG_MAX & (D_RX | D_TX))
static void arcnet_dump_packet(struct net_device *dev, int bufnum,
char *desc, int take_arcnet_lock)
@@ -181,7 +176,8 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum,
char hdr[32];
/* hw.copy_from_card expects IRQ context so take the IRQ lock
- to keep it single threaded */
+ * to keep it single threaded
+ */
if (take_arcnet_lock)
spin_lock_irqsave(&lp->lock, flags);
@@ -204,8 +200,7 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum,
#endif
-/*
- * Unregister a protocol driver from the arc_proto_map. Protocol drivers
+/* Unregister a protocol driver from the arc_proto_map. Protocol drivers
* are responsible for registering themselves, but the unregister routine
* is pretty generic so we'll do it here.
*/
@@ -226,8 +221,7 @@ void arcnet_unregister_proto(struct ArcProto *proto)
}
}
-/*
- * Add a buffer to the queue. Only the interrupt handler is allowed to do
+/* Add a buffer to the queue. Only the interrupt handler is allowed to do
* this, unless interrupts are disabled.
*
* Note: we don't check for a full queue, since there aren't enough buffers
@@ -250,9 +244,8 @@ static void release_arcbuf(struct net_device *dev, int bufnum)
}
}
-/*
- * Get a buffer from the queue. If this returns -1, there are no buffers
- * available.
+/* Get a buffer from the queue.
+ * If this returns -1, there are no buffers available.
*/
static int get_arcbuf(struct net_device *dev)
{
@@ -346,8 +339,7 @@ struct net_device *alloc_arcdev(const char *name)
return dev;
}
-/*
- * Open/initialize the board. This is called sometime after booting when
+/* Open/initialize the board. This is called sometime after booting when
* the 'ifconfig' program is run.
*
* This routine should set everything up anew at each open, even registers
@@ -490,15 +482,13 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
BUGMSG(D_DEBUG, "arc_raw_proto used. proto='%c'\n", proto->suffix);
_daddr = daddr ? *(uint8_t *)daddr : 0;
} else if (!daddr) {
- /*
- * if the dest addr isn't provided, we can't choose an encapsulation!
- * Store the packet type (eg. ETH_P_IP) for now, and we'll push on a
- * real header when we do rebuild_header.
+ /* if the dest addr isn't provided, we can't choose an
+ * encapsulation! Store the packet type (eg. ETH_P_IP)
+ * for now, and we'll push on a real header when we do
+ * rebuild_header.
*/
*(uint16_t *)skb_push(skb, 2) = type;
- /*
- * XXX: Why not use skb->mac_len?
- */
+ /* XXX: Why not use skb->mac_len? */
if (skb->network_header - skb->mac_header != 2)
BUGMSG(D_NORMAL, "arcnet_header: Yikes! diff (%d) is not 2!\n",
(int)(skb->network_header - skb->mac_header));
@@ -564,7 +554,8 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
if (proto->prepare_tx(dev, pkt, skb->len, txbuf) &&
!proto->ack_tx) {
/* done right away and we don't want to acknowledge
- the package later - forget about it now */
+ * the package later - forget about it now
+ */
dev->stats.tx_bytes += skb->len;
freeskb = 1;
} else {
@@ -605,8 +596,7 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
return retval; /* no need to try again */
}
-/*
- * Actually start transmitting a packet that was loaded into a buffer
+/* Actually start transmitting a packet that was loaded into a buffer
* by prepare_tx. This should _only_ be called by the interrupt handler.
*/
static int go_tx(struct net_device *dev)
@@ -672,8 +662,7 @@ void arcnet_timeout(struct net_device *dev)
netif_wake_queue(dev);
}
-/*
- * The typical workload of the driver: Handle the network interface
+/* The typical workload of the driver: Handle the network interface
* interrupts. Establish which device needs attention, and call the correct
* chipset interrupt handler.
*/
@@ -693,9 +682,8 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
spin_lock(&lp->lock);
- /*
- * RESET flag was enabled - if device is not running, we must clear it right
- * away (but nothing else).
+ /* RESET flag was enabled - if device is not running, we must
+ * clear it right away (but nothing else).
*/
if (!netif_running(dev)) {
if (ASTATUS() & RESETflag)
@@ -717,11 +705,11 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
__FILE__, __LINE__, __func__, status);
didsomething = 0;
- /*
- * RESET flag was enabled - card is resetting and if RX is
+ /* RESET flag was enabled - card is resetting and if RX is
* disabled, it's NOT because we just got a packet.
*
- * The card is in an undefined state. Clear it out and start over.
+ * The card is in an undefined state.
+ * Clear it out and start over.
*/
if (status & RESETflag) {
BUGMSG(D_NORMAL, "spurious reset (status=%Xh)\n", status);
@@ -731,14 +719,13 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
/* get out of the interrupt handler! */
break;
}
- /*
- * RX is inhibited - we must have received something. Prepare to
- * receive into the next buffer.
+ /* RX is inhibited - we must have received something.
+ * Prepare to receive into the next buffer.
*
- * We don't actually copy the received packet from the card until
- * after the transmit handler runs (and possibly launches the next
- * tx); this should improve latency slightly if we get both types
- * of interrupts at once.
+ * We don't actually copy the received packet from the card
+ * until after the transmit handler runs (and possibly
+ * launches the next tx); this should improve latency slightly
+ * if we get both types of interrupts at once.
*/
recbuf = -1;
if (status & lp->intmask & NORXflag) {
@@ -914,8 +901,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
return retval;
}
-/*
- * This is a generic packet receiver that calls arcnet??_rx depending on the
+/* This is a generic packet receiver that calls arcnet??_rx depending on the
* protocol ID found.
*/
static void arcnet_rx(struct net_device *dev, int bufnum)
diff --git a/drivers/net/arcnet/capmode.c b/drivers/net/arcnet/capmode.c
index 36648d350959..8391324f684b 100644
--- a/drivers/net/arcnet/capmode.c
+++ b/drivers/net/arcnet/capmode.c
@@ -66,11 +66,11 @@ static void rx(struct net_device *dev, int bufnum,
pkt = (struct archdr *)skb_mac_header(skb);
skb_pull(skb, ARC_HDR_SIZE);
- /* up to sizeof(pkt->soft) has already been copied from the card */
- /* squeeze in an int for the cap encapsulation */
-
- /* use these variables to be sure we count in bytes, not in
- sizeof(struct archdr) */
+ /* up to sizeof(pkt->soft) has already been copied from the card
+ * squeeze in an int for the cap encapsulation
+ * use these variables to be sure we count in bytes, not in
+ * sizeof(struct archdr)
+ */
pktbuf = (char *)pkt;
pkthdrbuf = (char *)pkthdr;
memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto));
@@ -90,8 +90,7 @@ static void rx(struct net_device *dev, int bufnum,
netif_rx(skb);
}
-/*
- * Create the ARCnet hard/soft headers for cap mode.
+/* Create the ARCnet hard/soft headers for cap mode.
* There aren't any soft headers in cap mode - not even the protocol id.
*/
static int build_header(struct sk_buff *skb,
@@ -104,8 +103,8 @@ static int build_header(struct sk_buff *skb,
BUGMSG(D_PROTO, "Preparing header for cap packet %x.\n",
*((int *)&pkt->soft.cap.cookie[0]));
- /*
- * Set the source hardware address.
+
+ /* Set the source hardware address.
*
* This is pretty pointless for most purposes, but it can help in
* debugging. ARCnet does not allow us to change the source address in
@@ -116,9 +115,8 @@ static int build_header(struct sk_buff *skb,
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
- /*
- * FIXME: fill in the last byte of the dest ipaddr here to better
- * comply with RFC1051 in "noarp" mode.
+ /* FIXME: fill in the last byte of the dest ipaddr here to
+ * better comply with RFC1051 in "noarp" mode.
*/
pkt->hard.dest = 0;
return hdr_size;
@@ -172,7 +170,8 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
sizeof(pkt->soft.cap.proto));
/* Skip the extra integer we have written into it as a cookie
- but write the rest of the message: */
+ * but write the rest of the message:
+ */
lp->hw.copy_to_card(dev, bufnum, ofs + 1,
((unsigned char *)&pkt->soft.cap.mes), length - 1);
diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c
index d829e605470f..6e38a19d7210 100644
--- a/drivers/net/arcnet/com20020-isa.c
+++ b/drivers/net/arcnet/com20020-isa.c
@@ -43,8 +43,7 @@
#define VERSION "arcnet: COM20020 ISA support (by David Woodhouse et al.)\n"
-/*
- * We cannot (yet) probe for an IO mapped card, although we can check that
+/* We cannot (yet) probe for an IO mapped card, although we can check that
* it's where we were told it was, and even do autoirq.
*/
static int __init com20020isa_probe(struct net_device *dev)
diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index bdf883f9870e..63697272f146 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -239,8 +239,7 @@ int com20020_found(struct net_device *dev, int shared)
return 0;
}
-/*
- * Do a hardware reset on the card, and set up necessary registers.
+/* Do a hardware reset on the card, and set up necessary registers.
*
* This should be called as little as possible, because it disrupts the
* token on the network (causes a RECON) and requires a significant delay.
diff --git a/drivers/net/arcnet/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c
index 437b456afe68..13fe53864383 100644
--- a/drivers/net/arcnet/com20020_cs.c
+++ b/drivers/net/arcnet/com20020_cs.c
@@ -162,8 +162,7 @@ static void com20020_detach(struct pcmcia_device *link)
unregister_netdev(dev);
- /*
- * this is necessary because we register our IRQ separately
+ /* this is necessary because we register our IRQ separately
* from card services.
*/
if (dev->irq)
diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c
index 32333465327a..6ec36f9975ba 100644
--- a/drivers/net/arcnet/com90io.c
+++ b/drivers/net/arcnet/com90io.c
@@ -137,8 +137,7 @@ static void put_whole_buffer(struct net_device *dev, unsigned offset, unsigned l
#endif
}
-/*
- * We cannot probe for an IO mapped card either, although we can check that
+/* We cannot probe for an IO mapped card either, although we can check that
* it's where we were told it was, and even autoirq
*/
static int __init com90io_probe(struct net_device *dev)
@@ -196,8 +195,7 @@ static int __init com90io_probe(struct net_device *dev)
goto err_out;
}
if (!dev->irq) {
- /*
- * if we do this, we're sure to get an IRQ since the
+ /* if we do this, we're sure to get an IRQ since the
* card has just reset and the NORXflag is on until
* we tell it to start receiving.
*/
@@ -272,8 +270,7 @@ static int __init com90io_found(struct net_device *dev)
return 0;
}
-/*
- * Do a hardware reset on the card, and set up necessary registers.
+/* Do a hardware reset on the card, and set up necessary registers.
*
* This should be called as little as possible, because it disrupts the
* token on the network (causes a RECON) and requires a significant delay.
diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c
index 0b7bc869db21..4781cd696dd1 100644
--- a/drivers/net/arcnet/com90xx.c
+++ b/drivers/net/arcnet/com90xx.c
@@ -568,8 +568,7 @@ static void com90xx_setmask(struct net_device *dev, int mask)
AINTMASK(mask);
}
-/*
- * Do a hardware reset on the card, and set up necessary registers.
+/* Do a hardware reset on the card, and set up necessary registers.
*
* This should be called as little as possible, because it disrupts the
* token on the network (causes a RECON) and requires a significant delay.
diff --git a/drivers/net/arcnet/rfc1051.c b/drivers/net/arcnet/rfc1051.c
index ed7b6459bbfa..e78b76535acc 100644
--- a/drivers/net/arcnet/rfc1051.c
+++ b/drivers/net/arcnet/rfc1051.c
@@ -78,8 +78,7 @@ module_exit(arcnet_rfc1051_exit);
MODULE_LICENSE("GPL");
-/*
- * Determine a packet's protocol ID.
+/* Determine a packet's protocol ID.
*
* With ARCnet we have to convert everything to Ethernet-style stuff.
*/
@@ -156,9 +155,7 @@ static void rx(struct net_device *dev, int bufnum,
netif_rx(skb);
}
-/*
- * Create the ARCnet hard/soft headers for RFC1051.
- */
+/* Create the ARCnet hard/soft headers for RFC1051 */
static int build_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, uint8_t daddr)
{
@@ -182,21 +179,19 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
return 0;
}
- /*
- * Set the source hardware address.
+ /* Set the source hardware address.
*
* This is pretty pointless for most purposes, but it can help in
- * debugging. ARCnet does not allow us to change the source address in
- * the actual packet sent)
+ * debugging. ARCnet does not allow us to change the source address
+ * in the actual packet sent.
*/
pkt->hard.source = *dev->dev_addr;
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
- /*
- * FIXME: fill in the last byte of the dest ipaddr here to better
- * comply with RFC1051 in "noarp" mode.
+ /* FIXME: fill in the last byte of the dest ipaddr here to
+ * better comply with RFC1051 in "noarp" mode.
*/
pkt->hard.dest = 0;
return hdr_size;
diff --git a/drivers/net/arcnet/rfc1201.c b/drivers/net/arcnet/rfc1201.c
index 47750173fd14..4ebfbcbe5de3 100644
--- a/drivers/net/arcnet/rfc1201.c
+++ b/drivers/net/arcnet/rfc1201.c
@@ -81,8 +81,7 @@ static void __exit arcnet_rfc1201_exit(void)
module_init(arcnet_rfc1201_init);
module_exit(arcnet_rfc1201_exit);
-/*
- * Determine a packet's protocol ID.
+/* Determine a packet's protocol ID.
*
* With ARCnet we have to convert everything to Ethernet-style stuff.
*/
@@ -193,10 +192,10 @@ static void rx(struct net_device *dev, int bufnum,
pkt->soft.raw + sizeof(pkt->soft),
length - sizeof(pkt->soft));
- /*
- * ARP packets have problems when sent from some DOS systems: the
- * source address is always 0! So we take the hardware source addr
- * (which is impossible to fumble) and insert it ourselves.
+ /* ARP packets have problems when sent from some DOS systems:
+ * the source address is always 0!
+ * So we take the hardware source addr (which is impossible
+ * to fumble) and insert it ourselves.
*/
if (soft->proto == ARC_P_ARP) {
struct arphdr *arp = (struct arphdr *)soft->payload;
@@ -227,21 +226,22 @@ static void rx(struct net_device *dev, int bufnum,
skb->protocol = type_trans(skb, dev);
netif_rx(skb);
} else { /* split packet */
- /*
- * NOTE: MSDOS ARP packet correction should only need to apply to
- * unsplit packets, since ARP packets are so short.
+ /* NOTE: MSDOS ARP packet correction should only need to
+ * apply to unsplit packets, since ARP packets are so short.
*
- * My interpretation of the RFC1201 document is that if a packet is
- * received out of order, the entire assembly process should be
- * aborted.
+ * My interpretation of the RFC1201 document is that if a
+ * packet is received out of order, the entire assembly
+ * process should be aborted.
*
- * The RFC also mentions "it is possible for successfully received
- * packets to be retransmitted." As of 0.40 all previously received
- * packets are allowed, not just the most recent one.
+ * The RFC also mentions "it is possible for successfully
+ * received packets to be retransmitted." As of 0.40 all
+ * previously received packets are allowed, not just the
+ * most recent one.
*
- * We allow multiple assembly processes, one for each ARCnet card
- * possible on the network. Seems rather like a waste of memory,
- * but there's no other way to be reliable.
+ * We allow multiple assembly processes, one for each
+ * ARCnet card possible on the network.
+ * Seems rather like a waste of memory, but there's no
+ * other way to be reliable.
*/
BUGMSG(D_RX, "packet is split (splitflag=%d, seq=%d)\n",
@@ -299,8 +299,7 @@ static void rx(struct net_device *dev, int bufnum,
} else { /* not first packet */
int packetnum = ((unsigned)soft->split_flag >> 1) + 1;
- /*
- * if we're not assembling, there's no point trying to
+ /* if we're not assembling, there's no point trying to
* continue.
*/
if (!in->skb) {
@@ -401,12 +400,11 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
return 0;
}
- /*
- * Set the source hardware address.
+ /* Set the source hardware address.
*
* This is pretty pointless for most purposes, but it can help in
- * debugging. ARCnet does not allow us to change the source address in
- * the actual packet sent)
+ * debugging. ARCnet does not allow us to change the source address
+ * in the actual packet sent.
*/
pkt->hard.source = *dev->dev_addr;
@@ -416,10 +414,10 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
- /*
- * FIXME: fill in the last byte of the dest ipaddr here to better
- * comply with RFC1051 in "noarp" mode. For now, always broadcasting
- * will probably at least get packets sent out :)
+ /* FIXME: fill in the last byte of the dest ipaddr here
+ * to better comply with RFC1051 in "noarp" mode.
+ * For now, always broadcasting will probably at least get
+ * packets sent out :)
*/
pkt->hard.dest = 0;
return hdr_size;