isci: uplevel phy infrastructure

Merge core/scic_sds_phy.[ch] into phy.[ch]

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

11 files changed, 2784 insertions, 3031 deletions

diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile
index a7d1eb33eca2..2830a97a822a 100644
--- a/drivers/scsi/isci/Makefile
+++ b/drivers/scsi/isci/Makefile
@@ -12,4 +12,3 @@ isci-objs := init.o phy.o request.o sata.o \
 	     smp_request.o \
 	     core/scic_sds_port.o \
 	     core/scic_sds_port_configuration_agent.o \
-	     core/scic_sds_phy.o \
diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h
deleted file mode 100644
index f046b4af4b8d..000000000000
--- a/drivers/scsi/isci/core/scic_phy.h
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SCIC_PHY_H_
-#define _SCIC_PHY_H_
-
-/**
- * This file contains all of the interface methods that can be called by an
- *    SCIC user on a phy (SAS or SATA) object.
- *
- *
- */
-
-
-#include <scsi/sas.h>
-#include <scsi/libsas.h>
-
-struct scic_sds_phy;
-struct scic_sds_port;
-
-
-enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy);
-
-struct scic_phy_cap {
-	union {
-		struct {
-			/*
-			 * The SAS specification indicates the start bit shall
-			 * always be set to
-			 * 1.  This implementation will have the start bit set
-			 * to 0 if the PHY CAPABILITIES were either not
-			 * received or speed negotiation failed.
-			 */
-			u8 start:1;
-			u8 tx_ssc_type:1;
-			u8 res1:2;
-			u8 req_logical_linkrate:4;
-
-			u32 gen1_no_ssc:1;
-			u32 gen1_ssc:1;
-			u32 gen2_no_ssc:1;
-			u32 gen2_ssc:1;
-			u32 gen3_no_ssc:1;
-			u32 gen3_ssc:1;
-			u32 res2:17;
-			u32 parity:1;
-		};
-		u32 all;
-	};
-}  __packed;
-
-/* this data structure reflects the link layer transmit identification reg */
-struct scic_phy_proto {
-	union {
-		struct {
-			u16 _r_a:1;
-			u16 smp_iport:1;
-			u16 stp_iport:1;
-			u16 ssp_iport:1;
-			u16 _r_b:4;
-			u16 _r_c:1;
-			u16 smp_tport:1;
-			u16 stp_tport:1;
-			u16 ssp_tport:1;
-			u16 _r_d:4;
-		};
-		u16 all;
-	};
-} __packed;
-
-
-/**
- * struct scic_phy_properties - This structure defines the properties common to
- *    all phys that can be retrieved.
- *
- *
- */
-struct scic_phy_properties {
-	/**
-	 * This field specifies the port that currently contains the
-	 * supplied phy.  This field may be set to NULL
-	 * if the phy is not currently contained in a port.
-	 */
-	struct scic_sds_port *owning_port;
-
-	/**
-	 * This field specifies the link rate at which the phy is
-	 * currently operating.
-	 */
-	enum sas_linkrate negotiated_link_rate;
-
-	/**
-	 * This field specifies the index of the phy in relation to other
-	 * phys within the controller.  This index is zero relative.
-	 */
-	u8 index;
-};
-
-/**
- * struct scic_sas_phy_properties - This structure defines the properties,
- *    specific to a SAS phy, that can be retrieved.
- *
- *
- */
-struct scic_sas_phy_properties {
-	/**
-	 * This field delineates the Identify Address Frame received
-	 * from the remote end point.
-	 */
-	struct sas_identify_frame rcvd_iaf;
-
-	/**
-	 * This field delineates the Phy capabilities structure received
-	 * from the remote end point.
-	 */
-	struct scic_phy_cap rcvd_cap;
-
-};
-
-/**
- * struct scic_sata_phy_properties - This structure defines the properties,
- *    specific to a SATA phy, that can be retrieved.
- *
- *
- */
-struct scic_sata_phy_properties {
-	/**
-	 * This field delineates the signature FIS received from the
-	 * attached target.
-	 */
-	struct dev_to_host_fis signature_fis;
-
-	/**
-	 * This field specifies to the user if a port selector is connected
-	 * on the specified phy.
-	 */
-	bool is_port_selector_present;
-
-};
-
-/**
- * enum scic_phy_counter_id - This enumeration depicts the various pieces of
- *    optional information that can be retrieved for a specific phy.
- *
- *
- */
-enum scic_phy_counter_id {
-	/**
-	 * This PHY information field tracks the number of frames received.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_FRAME,
-
-	/**
-	 * This PHY information field tracks the number of frames transmitted.
-	 */
-	SCIC_PHY_COUNTER_TRANSMITTED_FRAME,
-
-	/**
-	 * This PHY information field tracks the number of DWORDs received.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD,
-
-	/**
-	 * This PHY information field tracks the number of DWORDs transmitted.
-	 */
-	SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD,
-
-	/**
-	 * This PHY information field tracks the number of times DWORD
-	 * synchronization was lost.
-	 */
-	SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR,
-
-	/**
-	 * This PHY information field tracks the number of received DWORDs with
-	 * running disparity errors.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR,
-
-	/**
-	 * This PHY information field tracks the number of received frames with a
-	 * CRC error (not including short or truncated frames).
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR,
-
-	/**
-	 * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
-	 * primitives received.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT,
-
-	/**
-	 * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
-	 * primitives transmitted.
-	 */
-	SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT,
-
-	/**
-	 * This PHY information field tracks the number of times the inactivity
-	 * timer for connections on the phy has been utilized.
-	 */
-	SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED,
-
-	/**
-	 * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
-	 * primitives received.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT,
-
-	/**
-	 * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
-	 * primitives transmitted.
-	 */
-	SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT,
-
-	/**
-	 * This PHY information field tracks the number of CREDIT BLOCKED
-	 * primitives received.
-	 * @note Depending on remote device implementation, credit blocks
-	 *       may occur regularly.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED,
-
-	/**
-	 * This PHY information field contains the number of short frames
-	 * received.  A short frame is simply a frame smaller then what is
-	 * allowed by either the SAS or SATA specification.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME,
-
-	/**
-	 * This PHY information field contains the number of frames received after
-	 * credit has been exhausted.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT,
-
-	/**
-	 * This PHY information field contains the number of frames received after
-	 * a DONE has been received.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE,
-
-	/**
-	 * This PHY information field contains the number of times the phy
-	 * failed to achieve DWORD synchronization during speed negotiation.
-	 */
-	SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR
-};
-
-#endif  /* _SCIC_PHY_H_ */
diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h
index 51e7eede5c88..431dbd2093f3 100644
--- a/drivers/scsi/isci/core/scic_port.h
+++ b/drivers/scsi/isci/core/scic_port.h
@@ -58,7 +58,7 @@
 
 #include "isci.h"
 #include "sas.h"
-#include "scic_phy.h"
+#include "phy.h"
 
 struct scic_sds_port;
 
diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c
deleted file mode 100644
index 150509b0c69e..000000000000
--- a/drivers/scsi/isci/core/scic_sds_phy.c
+++ /dev/null
@@ -1,2277 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <scsi/sas.h>
-#include "sas.h"
-#include "host.h"
-#include "state_machine.h"
-#include "scic_phy.h"
-#include "scic_sds_phy.h"
-#include "scic_sds_port.h"
-#include "remote_node_context.h"
-#include "scu_event_codes.h"
-#include "timers.h"
-
-#define SCIC_SDS_PHY_MIN_TIMER_COUNT  (SCI_MAX_PHYS)
-#define SCIC_SDS_PHY_MAX_TIMER_COUNT  (SCI_MAX_PHYS)
-
-/* Maximum arbitration wait time in micro-seconds */
-#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME  (700)
-
-enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy)
-{
-	return sci_phy->max_negotiated_speed;
-}
-
-/*
- * *****************************************************************************
- * * SCIC SDS PHY Internal Methods
- * ***************************************************************************** */
-
-/**
- * This method will initialize the phy transport layer registers
- * @sci_phy:
- * @transport_layer_registers
- *
- * enum sci_status
- */
-static enum sci_status scic_sds_phy_transport_layer_initialization(
-	struct scic_sds_phy *sci_phy,
-	struct scu_transport_layer_registers __iomem *transport_layer_registers)
-{
-	u32 tl_control;
-
-	sci_phy->transport_layer_registers = transport_layer_registers;
-
-	writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX,
-		&sci_phy->transport_layer_registers->stp_rni);
-
-	/*
-	 * Hardware team recommends that we enable the STP prefetch for all
-	 * transports
-	 */
-	tl_control = readl(&sci_phy->transport_layer_registers->control);
-	tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH);
-	writel(tl_control, &sci_phy->transport_layer_registers->control);
-
-	return SCI_SUCCESS;
-}
-
-/**
- * This method will initialize the phy link layer registers
- * @sci_phy:
- * @link_layer_registers:
- *
- * enum sci_status
- */
-static enum sci_status
-scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
-				       struct scu_link_layer_registers __iomem *link_layer_registers)
-{
-	struct scic_sds_controller *scic =
-		sci_phy->owning_port->owning_controller;
-	int phy_idx = sci_phy->phy_index;
-	struct sci_phy_user_params *phy_user =
-		&scic->user_parameters.sds1.phys[phy_idx];
-	struct sci_phy_oem_params *phy_oem =
-		&scic->oem_parameters.sds1.phys[phy_idx];
-	u32 phy_configuration;
-	struct scic_phy_cap phy_cap;
-	u32 parity_check = 0;
-	u32 parity_count = 0;
-	u32 llctl, link_rate;
-	u32 clksm_value = 0;
-
-	sci_phy->link_layer_registers = link_layer_registers;
-
-	/* Set our IDENTIFY frame data */
-	#define SCI_END_DEVICE 0x01
-
-	writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) |
-	       SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) |
-	       SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) |
-	       SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) |
-	       SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE),
-	       &sci_phy->link_layer_registers->transmit_identification);
-
-	/* Write the device SAS Address */
-	writel(0xFEDCBA98,
-	       &sci_phy->link_layer_registers->sas_device_name_high);
-	writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low);
-
-	/* Write the source SAS Address */
-	writel(phy_oem->sas_address.high,
-		&sci_phy->link_layer_registers->source_sas_address_high);
-	writel(phy_oem->sas_address.low,
-		&sci_phy->link_layer_registers->source_sas_address_low);
-
-	/* Clear and Set the PHY Identifier */
-	writel(0, &sci_phy->link_layer_registers->identify_frame_phy_id);
-	writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx),
-		&sci_phy->link_layer_registers->identify_frame_phy_id);
-
-	/* Change the initial state of the phy configuration register */
-	phy_configuration =
-		readl(&sci_phy->link_layer_registers->phy_configuration);
-
-	/* Hold OOB state machine in reset */
-	phy_configuration |=  SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
-	writel(phy_configuration,
-		&sci_phy->link_layer_registers->phy_configuration);
-
-	/* Configure the SNW capabilities */
-	phy_cap.all = 0;
-	phy_cap.start = 1;
-	phy_cap.gen3_no_ssc = 1;
-	phy_cap.gen2_no_ssc = 1;
-	phy_cap.gen1_no_ssc = 1;
-	if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) {
-		phy_cap.gen3_ssc = 1;
-		phy_cap.gen2_ssc = 1;
-		phy_cap.gen1_ssc = 1;
-	}
-
-	/*
-	 * The SAS specification indicates that the phy_capabilities that
-	 * are transmitted shall have an even parity.  Calculate the parity. */
-	parity_check = phy_cap.all;
-	while (parity_check != 0) {
-		if (parity_check & 0x1)
-			parity_count++;
-		parity_check >>= 1;
-	}
-
-	/*
-	 * If parity indicates there are an odd number of bits set, then
-	 * set the parity bit to 1 in the phy capabilities. */
-	if ((parity_count % 2) != 0)
-		phy_cap.parity = 1;
-
-	writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities);
-
-	/* Set the enable spinup period but disable the ability to send
-	 * notify enable spinup
-	 */
-	writel(SCU_ENSPINUP_GEN_VAL(COUNT,
-			phy_user->notify_enable_spin_up_insertion_frequency),
-		&sci_phy->link_layer_registers->notify_enable_spinup_control);
-
-	/* Write the ALIGN Insertion Ferequency for connected phy and
-	 * inpendent of connected state
-	 */
-	clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED,
-			phy_user->in_connection_align_insertion_frequency);
-
-	clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
-			phy_user->align_insertion_frequency);
-
-	writel(clksm_value, &sci_phy->link_layer_registers->clock_skew_management);
-
-	/* @todo Provide a way to write this register correctly */
-	writel(0x02108421,
-		&sci_phy->link_layer_registers->afe_lookup_table_control);
-
-	llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT,
-		(u8)scic->user_parameters.sds1.no_outbound_task_timeout);
-
-	switch(phy_user->max_speed_generation) {
-	case SCIC_SDS_PARM_GEN3_SPEED:
-		link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3;
-		break;
-	case SCIC_SDS_PARM_GEN2_SPEED:
-		link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2;
-		break;
-	default:
-		link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1;
-		break;
-	}
-	llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
-	writel(llctl, &sci_phy->link_layer_registers->link_layer_control);
-
-	if (is_a0() || is_a2()) {
-		/* Program the max ARB time for the PHY to 700us so we inter-operate with
-		 * the PMC expander which shuts down PHYs if the expander PHY generates too
-		 * many breaks.  This time value will guarantee that the initiator PHY will
-		 * generate the break.
-		 */
-		writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME,
-			&sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout);
-	}
-
-	/*
-	 * Set the link layer hang detection to 500ms (0x1F4) from its default
-	 * value of 128ms.  Max value is 511 ms.
-	 */
-	writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout);
-
-	/* We can exit the initial state to the stopped state */
-	sci_base_state_machine_change_state(&sci_phy->state_machine,
-					    SCI_BASE_PHY_STATE_STOPPED);
-
-	return SCI_SUCCESS;
-}
-
-/**
- * This function will handle the sata SIGNATURE FIS timeout condition.  It will
- * restart the starting substate machine since we dont know what has actually
- * happening.
- */
-static void scic_sds_phy_sata_timeout(void *phy)
-{
-	struct scic_sds_phy *sci_phy = phy;
-
-	dev_dbg(sciphy_to_dev(sci_phy),
-		 "%s: SCIC SDS Phy 0x%p did not receive signature fis before "
-		 "timeout.\n",
-		 __func__,
-		 sci_phy);
-
-	sci_base_state_machine_stop(&sci_phy->starting_substate_machine);
-
-	sci_base_state_machine_change_state(&sci_phy->state_machine,
-					    SCI_BASE_PHY_STATE_STARTING);
-}
-
-/**
- * This method returns the port currently containing this phy. If the phy is
- *    currently contained by the dummy port, then the phy is considered to not
- *    be part of a port.
- * @sci_phy: This parameter specifies the phy for which to retrieve the
- *    containing port.
- *
- * This method returns a handle to a port that contains the supplied phy.
- * NULL This value is returned if the phy is not part of a real
- * port (i.e. it's contained in the dummy port). !NULL All other
- * values indicate a handle/pointer to the port containing the phy.
- */
-struct scic_sds_port *scic_sds_phy_get_port(
-	struct scic_sds_phy *sci_phy)
-{
-	if (scic_sds_port_get_index(sci_phy->owning_port) == SCIC_SDS_DUMMY_PORT)
-		return NULL;
-
-	return sci_phy->owning_port;
-}
-
-/**
- * This method will assign a port to the phy object.
- * @out]: sci_phy This parameter specifies the phy for which to assign a port
- *    object.
- *
- *
- */
-void scic_sds_phy_set_port(
-	struct scic_sds_phy *sci_phy,
-	struct scic_sds_port *sci_port)
-{
-	sci_phy->owning_port = sci_port;
-
-	if (sci_phy->bcn_received_while_port_unassigned) {
-		sci_phy->bcn_received_while_port_unassigned = false;
-		scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy);
-	}
-}
-
-/**
- * This method will initialize the constructed phy
- * @sci_phy:
- * @link_layer_registers:
- *
- * enum sci_status
- */
-enum sci_status scic_sds_phy_initialize(
-	struct scic_sds_phy *sci_phy,
-	struct scu_transport_layer_registers __iomem *transport_layer_registers,
-	struct scu_link_layer_registers __iomem *link_layer_registers)
-{
-	struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy);
-	struct isci_host *ihost = scic_to_ihost(scic);
-
-	/* Create the SIGNATURE FIS Timeout timer for this phy */
-	sci_phy->sata_timeout_timer =
-		isci_timer_create(
-			ihost,
-			sci_phy,
-			scic_sds_phy_sata_timeout);
-
-	/* Perfrom the initialization of the TL hardware */
-	scic_sds_phy_transport_layer_initialization(
-			sci_phy,
-			transport_layer_registers);
-
-	/* Perofrm the initialization of the PE hardware */
-	scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers);
-
-	/*
-	 * There is nothing that needs to be done in this state just
-	 * transition to the stopped state. */
-	sci_base_state_machine_change_state(&sci_phy->state_machine,
-					    SCI_BASE_PHY_STATE_STOPPED);
-
-	return SCI_SUCCESS;
-}
-
-/**
- * This method assigns the direct attached device ID for this phy.
- *
- * @sci_phy The phy for which the direct attached device id is to
- *       be assigned.
- * @device_id The direct attached device ID to assign to the phy.
- *       This will either be the RNi for the device or an invalid RNi if there
- *       is no current device assigned to the phy.
- */
-void scic_sds_phy_setup_transport(
-	struct scic_sds_phy *sci_phy,
-	u32 device_id)
-{
-	u32 tl_control;
-
-	writel(device_id, &sci_phy->transport_layer_registers->stp_rni);
-
-	/*
-	 * The read should guarantee that the first write gets posted
-	 * before the next write
-	 */
-	tl_control = readl(&sci_phy->transport_layer_registers->control);
-	tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE);
-	writel(tl_control, &sci_phy->transport_layer_registers->control);
-}
-
-/**
- *
- * @sci_phy: The phy object to be suspended.
- *
- * This function will perform the register reads/writes to suspend the SCU
- * hardware protocol engine. none
- */
-static void scic_sds_phy_suspend(
-	struct scic_sds_phy *sci_phy)
-{
-	u32 scu_sas_pcfg_value;
-
-	scu_sas_pcfg_value =
-		readl(&sci_phy->link_layer_registers->phy_configuration);
-	scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
-	writel(scu_sas_pcfg_value,
-		&sci_phy->link_layer_registers->phy_configuration);
-
-	scic_sds_phy_setup_transport(
-			sci_phy,
-			SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
-}
-
-void scic_sds_phy_resume(struct scic_sds_phy *sci_phy)
-{
-	u32 scu_sas_pcfg_value;
-
-	scu_sas_pcfg_value =
-		readl(&sci_phy->link_layer_registers->phy_configuration);
-	scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
-	writel(scu_sas_pcfg_value,
-		&sci_phy->link_layer_registers->phy_configuration);
-}
-
-void scic_sds_phy_get_sas_address(struct scic_sds_phy *sci_phy,
-				  struct sci_sas_address *sas_address)
-{
-	sas_address->high = readl(&sci_phy->link_layer_registers->source_sas_address_high);
-	sas_address->low = readl(&sci_phy->link_layer_registers->source_sas_address_low);
-}
-
-void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy,
-					   struct sci_sas_address *sas_address)
-{
-	struct sas_identify_frame *iaf;
-	struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
-
-	iaf = &iphy->frame_rcvd.iaf;
-	memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE);
-}
-
-void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy,
-				struct scic_phy_proto *protocols)
-{
-	protocols->all =
-		(u16)(readl(&sci_phy->
-			link_layer_registers->transmit_identification) &
-				0x0000FFFF);
-}
-
-/**
- * This method will attempt to start the phy object. This request is only valid
- *    when the phy is in the stopped state
- * @sci_phy:
- *
- * enum sci_status
- */
-enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy)
-{
-	return sci_phy->state_handlers->start_handler(sci_phy);
-}
-
-/**
- * This method will attempt to stop the phy object.
- * @sci_phy:
- *
- * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE
- * if the phy is not in a valid state to stop
- */
-enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy)
-{
-	return sci_phy->state_handlers->stop_handler(sci_phy);
-}
-
-/**
- * This method will attempt to reset the phy.  This request is only valid when
- *    the phy is in an ready state
- * @sci_phy:
- *
- * enum sci_status
- */
-enum sci_status scic_sds_phy_reset(
-	struct scic_sds_phy *sci_phy)
-{
-	return sci_phy->state_handlers->reset_handler(sci_phy);
-}
-
-/**
- * This method will process the event code received.
- * @sci_phy:
- * @event_code:
- *
- * enum sci_status
- */
-enum sci_status scic_sds_phy_event_handler(
-	struct scic_sds_phy *sci_phy,
-	u32 event_code)
-{
-	return sci_phy->state_handlers->event_handler(sci_phy, event_code);
-}
-
-/**
- * This method will process the frame index received.
- * @sci_phy:
- * @frame_index:
- *
- * enum sci_status
- */
-enum sci_status scic_sds_phy_frame_handler(
-	struct scic_sds_phy *sci_phy,
-	u32 frame_index)
-{
-	return sci_phy->state_handlers->frame_handler(sci_phy, frame_index);
-}
-
-/**
- * This method will give the phy permission to consume power
- * @sci_phy:
- *
- * enum sci_status
- */
-enum sci_status scic_sds_phy_consume_power_handler(
-	struct scic_sds_phy *sci_phy)
-{
-	return sci_phy->state_handlers->consume_power_handler(sci_phy);
-}
-
-/*
- * *****************************************************************************
- * * SCIC SDS PHY HELPER FUNCTIONS
- * ***************************************************************************** */
-
-
-/**
- *
- * @sci_phy: The phy object that received SAS PHY DETECTED.
- *
- * This method continues the link training for the phy as if it were a SAS PHY
- * instead of a SATA PHY. This is done because the completion queue had a SAS
- * PHY DETECTED event when the state machine was expecting a SATA PHY event.
- * none
- */
-static void scic_sds_phy_start_sas_link_training(
-	struct scic_sds_phy *sci_phy)
-{
-	u32 phy_control;
-
-	phy_control =
-		readl(&sci_phy->link_layer_registers->phy_configuration);
-	phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD);
-	writel(phy_control,
-		&sci_phy->link_layer_registers->phy_configuration);
-
-	sci_base_state_machine_change_state(
-		&sci_phy->starting_substate_machine,
-		SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN
-		);
-
-	sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS;
-}
-
-/**
- *
- * @sci_phy: The phy object that received a SATA SPINUP HOLD event
- *
- * This method continues the link training for the phy as if it were a SATA PHY
- * instead of a SAS PHY.  This is done because the completion queue had a SATA
- * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none
- */
-static void scic_sds_phy_start_sata_link_training(
-	struct scic_sds_phy *sci_phy)
-{
-	sci_base_state_machine_change_state(
-		&sci_phy->starting_substate_machine,
-		SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER
-		);
-
-	sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;
-}
-
-/**
- * scic_sds_phy_complete_link_training - perform processing common to
- *    all protocols upon completion of link training.
- * @sci_phy: This parameter specifies the phy object for which link training
- *    has completed.
- * @max_link_rate: This parameter specifies the maximum link rate to be
- *    associated with this phy.
- * @next_state: This parameter specifies the next state for the phy's starting
- *    sub-state machine.
- *
- */
-static void scic_sds_phy_complete_link_training(
-	struct scic_sds_phy *sci_phy,
-	enum sas_linkrate max_link_rate,
-	u32 next_state)
-{
-	sci_phy->max_negotiated_speed = max_link_rate;
-
-	sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
-					    next_state);
-}
-
-static void scic_sds_phy_restart_starting_state(
-	struct scic_sds_phy *sci_phy)
-{
-	/* Stop the current substate machine */
-	sci_base_state_machine_stop(&sci_phy->starting_substate_machine);
-
-	/* Re-enter the base state machine starting state */
-	sci_base_state_machine_change_state(&sci_phy->state_machine,
-					    SCI_BASE_PHY_STATE_STARTING);
-}
-
-/* ****************************************************************************
-   * SCIC SDS PHY general handlers
-   ************************************************************************** */
-static enum sci_status scic_sds_phy_starting_substate_general_stop_handler(
-	struct scic_sds_phy *phy)
-{
-	sci_base_state_machine_stop(&phy->starting_substate_machine);
-
-	sci_base_state_machine_change_state(&phy->state_machine,
-						 SCI_BASE_PHY_STATE_STOPPED);
-
-	return SCI_SUCCESS;
-}
-
-/*
- * *****************************************************************************
- * * SCIC SDS PHY EVENT_HANDLERS
- * ***************************************************************************** */
-
-/**
- *
- * @phy: This struct scic_sds_phy object which has received an event.
- * @event_code: This is the event code which the phy object is to decode.
- *
- * This method is called when an event notification is received for the phy
- * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. -
- * decode the event - sas phy detected causes a state transition to the wait
- * for speed event notification. - any other events log a warning message and
- * set a failure status enum sci_status SCI_SUCCESS on any valid event notification
- * SCI_FAILURE on any unexpected event notifation
- */
-static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler(
-	struct scic_sds_phy *sci_phy,
-	u32 event_code)
-{
-	u32 result = SCI_SUCCESS;
-
-	switch (scu_get_event_code(event_code)) {
-	case SCU_EVENT_SAS_PHY_DETECTED:
-		scic_sds_phy_start_sas_link_training(sci_phy);
-		sci_phy->is_in_link_training = true;
-		break;
-
-	case SCU_EVENT_SATA_SPINUP_HOLD:
-		scic_sds_phy_start_sata_link_training(sci_phy);
-		sci_phy->is_in_link_training = true;
-		break;
-
-	default:
-		dev_dbg(sciphy_to_dev(sci_phy),
-			"%s: PHY starting substate machine received "
-			"unexpected event_code %x\n",
-			__func__,
-			event_code);
-
-		result = SCI_FAILURE;
-		break;
-	}
-
-	return result;
-}
-
-/**
- *
- * @phy: This struct scic_sds_phy object which has received an event.
- * @event_code: This is the event code which the phy object is to decode.
- *
- * This method is called when an event notification is received for the phy
- * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. -
- * decode the event - sas phy detected returns us back to this state. - speed
- * event detected causes a state transition to the wait for iaf. - identify
- * timeout is an un-expected event and the state machine is restarted. - link
- * failure events restart the starting state machine - any other events log a
- * warning message and set a failure status enum sci_status SCI_SUCCESS on any valid
- * event notification SCI_FAILURE on any unexpected event notifation
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler(
-	struct scic_sds_phy *sci_phy,
-	u32 event_code)
-{
-	u32 result = SCI_SUCCESS;
-
-	switch (scu_get_event_code(event_code)) {
-	case SCU_EVENT_SAS_PHY_DETECTED:
-		/*
-		 * Why is this being reported again by the controller?
-		 * We would re-enter this state so just stay here */
-		break;
-
-	case SCU_EVENT_SAS_15:
-	case SCU_EVENT_SAS_15_SSC:
-		scic_sds_phy_complete_link_training(
-			sci_phy,
-			SAS_LINK_RATE_1_5_GBPS,
-			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF);
-		break;
-
-	case SCU_EVENT_SAS_30:
-	case SCU_EVENT_SAS_30_SSC:
-		scic_sds_phy_complete_link_training(
-			sci_phy,
-			SAS_LINK_RATE_3_0_GBPS,
-			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF);
-		break;
-
-	case SCU_EVENT_SAS_60:
-	case SCU_EVENT_SAS_60_SSC:
-		scic_sds_phy_complete_link_training(
-			sci_phy,
-			SAS_LINK_RATE_6_0_GBPS,
-			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF);
-		break;
-
-	case SCU_EVENT_SATA_SPINUP_HOLD:
-		/*
-		 * We were doing SAS PHY link training and received a SATA PHY event
-		 * continue OOB/SN as if this were a SATA PHY */
-		scic_sds_phy_start_sata_link_training(sci_phy);
-		break;
-
-	case SCU_EVENT_LINK_FAILURE:
-		/* Link failure change state back to the starting state */
-		scic_sds_phy_restart_starting_state(sci_phy);
-		break;
-
-	default:
-		dev_warn(sciphy_to_dev(sci_phy),
-			 "%s: PHY starting substate machine received "
-			 "unexpected event_code %x\n",
-			 __func__,
-			 event_code);
-
-		result = SCI_FAILURE;
-		break;
-	}
-
-	return result;
-}
-
-/**
- *
- * @phy: This struct scic_sds_phy object which has received an event.
- * @event_code: This is the event code which the phy object is to decode.
- *
- * This method is called when an event notification is received for the phy
- * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. -
- * decode the event - sas phy detected event backs up the state machine to the
- * await speed notification. - identify timeout is an un-expected event and the
- * state machine is restarted. - link failure events restart the starting state
- * machine - any other events log a warning message and set a failure status
- * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any
- * unexpected event notifation
- */
-static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler(
-	struct scic_sds_phy *sci_phy,
-	u32 event_code)
-{
-	u32 result = SCI_SUCCESS;
-
-	switch (scu_get_event_code(event_code)) {
-	case SCU_EVENT_SAS_PHY_DETECTED:
-		/* Backup the state machine */
-		scic_sds_phy_start_sas_link_training(sci_phy);
-		break;
-
-	case SCU_EVENT_SATA_SPINUP_HOLD:
-		/*
-		 * We were doing SAS PHY link training and received a SATA PHY event
-		 * continue OOB/SN as if this were a SATA PHY */
-		scic_sds_phy_start_sata_link_training(sci_phy);
-		break;
-
-	case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT:
-	case SCU_EVENT_LINK_FAILURE:
-	case SCU_EVENT_HARD_RESET_RECEIVED:
-		/* Start the oob/sn state machine over again */
-		scic_sds_phy_restart_starting_state(sci_phy);
-		break;
-
-	default:
-		dev_warn(sciphy_to_dev(sci_phy),
-			 "%s: PHY starting substate machine received "
-			 "unexpected event_code %x\n",
-			 __func__,
-			 event_code);
-
-		result = SCI_FAILURE;
-		break;
-	}
-
-	return result;
-}
-
-/**
- *
- * @phy: This struct scic_sds_phy object which has received an event.
- * @event_code: This is the event code which the phy object is to decode.
- *
- * This method is called when an event notification is received for the phy
- * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_POWER. -
- * decode the event - link failure events restart the starting state machine -
- * any other events log a warning message and set a failure status enum sci_status
- * SCI_SUCCESS on a link failure event SCI_FAILURE on any unexpected event
- * notifation
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_handler(
-	struct scic_sds_phy *sci_phy,
-	u32 event_code)
-{
-	u32 result = SCI_SUCCESS;
-
-	switch (scu_get_event_code(event_code)) {
-	case SCU_EVENT_LINK_FAILURE:
-		/* Link failure change state back to the starting state */
-		scic_sds_phy_restart_starting_state(sci_phy);
-		break;
-
-	default:
-		dev_warn(sciphy_to_dev(sci_phy),
-			"%s: PHY starting substate machine received unexpected "
-			"event_code %x\n",
-			__func__,
-			event_code);
-
-		result = SCI_FAILURE;
-		break;
-	}
-
-	return result;
-}
-
-/**
- *
- * @phy: This struct scic_sds_phy object which has received an event.
- * @event_code: This is the event code which the phy object is to decode.
- *
- * This method is called when an event notification is received for the phy
- * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. -
- * decode the event - link failure events restart the starting state machine -
- * sata spinup hold events are ignored since they are expected - any other
- * events log a warning message and set a failure status enum sci_status SCI_SUCCESS
- * on a link failure event SCI_FAILURE on any unexpected event notifation
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_handler(
-	struct scic_sds_phy *sci_phy,
-	u32 event_code)
-{
-	u32 result = SCI_SUCCESS;
-
-	switch (scu_get_event_code(event_code)) {
-	case SCU_EVENT_LINK_FAILURE:
-		/* Link failure change state back to the starting state */
-		scic_sds_phy_restart_starting_state(sci_phy);
-		break;
-
-	case SCU_EVENT_SATA_SPINUP_HOLD:
-		/* These events are received every 10ms and are expected while in this state */
-		break;
-
-	case SCU_EVENT_SAS_PHY_DETECTED:
-		/*
-		 * There has been a change in the phy type before OOB/SN for the
-		 * SATA finished start down the SAS link traning path. */
-		scic_sds_phy_start_sas_link_training(sci_phy);
-		break;
-
-	default:
-		dev_warn(sciphy_to_dev(sci_phy),
-			 "%s: PHY starting substate machine received "
-			 "unexpected event_code %x\n",
-			 __func__,
-			 event_code);
-
-		result = SCI_FAILURE;
-		break;
-	}
-
-	return result;
-}
-
-/**
- * scic_sds_phy_starting_substate_await_sata_phy_event_handler -
- * @phy: This struct scic_sds_phy object which has received an event.
- * @event_code: This is the event code which the phy object is to decode.
- *
- * This method is called when an event notification is received for the phy
- * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. -
- * decode the event - link failure events restart the starting state machine -
- * sata spinup hold events are ignored since they are expected - sata phy
- * detected event change to the wait speed event - any other events log a
- * warning message and set a failure status enum sci_status SCI_SUCCESS on a link
- * failure event SCI_FAILURE on any unexpected event notifation
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handler(
-	struct scic_sds_phy *sci_phy, u32 event_code)
-{
-	u32 result = SCI_SUCCESS;
-
-	switch (scu_get_event_code(event_code)) {
-	case SCU_EVENT_LINK_FAILURE:
-		/* Link failure change state back to the starting state */
-		scic_sds_phy_restart_starting_state(sci_phy);
-		break;
-
-	case SCU_EVENT_SATA_SPINUP_HOLD:
-		/* These events might be received since we dont know how many may be in
-		 * the completion queue while waiting for power
-		 */
-		break;
-
-	case SCU_EVENT_SATA_PHY_DETECTED:
-		sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;
-
-		/* We have received the SATA PHY notification change state */
-		sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
-						    SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN);
-		break;
-
-	case SCU_EVENT_SAS_PHY_DETECTED:
-		/* There has been a change in the phy type before OOB/SN for the
-		 * SATA finished start down the SAS link traning path.
-		 */
-		scic_sds_phy_start_sas_link_training(sci_phy);
-		break;
-
-	default:
-		dev_warn(sciphy_to_dev(sci_phy),
-			 "%s: PHY starting substate machine received "
-			 "unexpected event_code %x\n",
-			 __func__,
-			 event_code);
-
-		result = SCI_FAILURE;
-		break;
-	}
-
-	return result;
-}
-
-/**
- *
- * @phy: This struct scic_sds_phy object which has received an event.
- * @event_code: This is the event code which the phy object is to decode.
- *
- * This method is called when an event notification is received for the phy
- * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN.
- * - decode the event - sata phy detected returns us back to this state. -
- * speed event detected causes a state transition to the wait for signature. -
- * link failure events restart the starting state machine - any other events
- * log a warning message and set a failure status enum sci_status SCI_SUCCESS on any
- * valid event notification SCI_FAILURE on any unexpected event notifation
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_handler(
-	struct scic_sds_phy *sci_phy,
-	u32 event_code)
-{
-	u32 result = SCI_SUCCESS;
-
-	switch (scu_get_event_code(event_code)) {
-	case SCU_EVENT_SATA_PHY_DETECTED:
-		/*
-		 * The hardware reports multiple SATA PHY detected events
-		 * ignore the extras */
-		break;
-
-	case SCU_EVENT_SATA_15:
-	case SCU_EVENT_SATA_15_SSC:
-		scic_sds_phy_complete_link_training(
-			sci_phy,
-			SAS_LINK_RATE_1_5_GBPS,
-			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
-		break;
-
-	case SCU_EVENT_SATA_30:
-	case SCU_EVENT_SATA_30_SSC:
-		scic_sds_phy_complete_link_training(
-			sci_phy,
-			SAS_LINK_RATE_3_0_GBPS,
-			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
-		break;
-
-	case SCU_EVENT_SATA_60:
-	case SCU_EVENT_SATA_60_SSC:
-		scic_sds_phy_complete_link_training(
-			sci_phy,
-			SAS_LINK_RATE_6_0_GBPS,
-			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
-		break;
-
-	case SCU_EVENT_LINK_FAILURE:
-		/* Link failure change state back to the starting state */
-		scic_sds_phy_restart_starting_state(sci_phy);
-		break;
-
-	case SCU_EVENT_SAS_PHY_DETECTED:
-		/*
-		 * There has been a change in the phy type before OOB/SN for the
-		 * SATA finished start down the SAS link traning path. */
-		scic_sds_phy_start_sas_link_training(sci_phy);
-		break;
-
-	default:
-		dev_warn(sciphy_to_dev(sci_phy),
-			 "%s: PHY starting substate machine received "
-			 "unexpected event_code %x\n",
-			 __func__,
-			 event_code);
-
-		result = SCI_FAILURE;
-		break;
-	}
-
-	return result;
-}
-
-/**
- * scic_sds_phy_starting_substate_await_sig_fis_event_handler -
- * @phy: This struct scic_sds_phy object which has received an event.
- * @event_code: This is the event code which the phy object is to decode.
- *
- * This method is called when an event notification is received for the phy
- * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. -
- * decode the event - sas phy detected event backs up the state machine to the
- * await speed notification. - identify timeout is an un-expected event and the
- * state machine is restarted. - link failure events restart the starting state
- * machine - any other events log a warning message and set a failure status
- * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any
- * unexpected event notifation
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handler(
-	struct scic_sds_phy *sci_phy, u32 event_code)
-{
-	u32 result = SCI_SUCCESS;
-
-	switch (scu_get_event_code(event_code)) {
-	case SCU_EVENT_SATA_PHY_DETECTED:
-		/* Backup the state machine */
-		sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
-						    SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN);
-		break;
-
-	case SCU_EVENT_LINK_FAILURE:
-		/* Link failure change state back to the starting state */
-		scic_sds_phy_restart_starting_state(sci_phy);
-		break;
-
-	default:
-		dev_warn(sciphy_to_dev(sci_phy),
-			 "%s: PHY starting substate machine received "
-			 "unexpected event_code %x\n",
-			 __func__,
-			 event_code);
-
-		result = SCI_FAILURE;
-		break;
-	}
-
-	return result;
-}
-
-
-/*
- * *****************************************************************************
- * *  SCIC SDS PHY FRAME_HANDLERS
- * ***************************************************************************** */
-
-/**
- *
- * @phy: This is struct scic_sds_phy object which is being requested to decode the
- *    frame data.
- * @frame_index: This is the index of the unsolicited frame which was received
- *    for this phy.
- *
- * This method decodes the unsolicited frame when the struct scic_sds_phy is in the
- * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Get the UF Header - If the UF
- * is an IAF - Copy IAF data to local phy object IAF data buffer. - Change
- * starting substate to wait power. - else - log warning message of unexpected
- * unsolicted frame - release frame buffer enum sci_status SCI_SUCCESS
- */
-static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler(
-	struct scic_sds_phy *sci_phy, u32 frame_index)
-{
-	enum sci_status result;
-	u32 *frame_words;
-	struct sas_identify_frame iaf;
-	struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
-
-	result = scic_sds_unsolicited_frame_control_get_header(
-		&(scic_sds_phy_get_controller(sci_phy)->uf_control),
-		frame_index,
-		(void **)&frame_words);
-
-	if (result != SCI_SUCCESS)
-		return result;
-
-	sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32));
-	if (iaf.frame_type == 0) {
-		u32 state;
-
-		memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf));
-		if (iaf.smp_tport) {
-			/* We got the IAF for an expander PHY go to the final
-			 * state since there are no power requirements for
-			 * expander phys.
-			 */
-			state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL;
-		} else {
-			/* We got the IAF we can now go to the await spinup
-			 * semaphore state
-			 */
-			state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER;
-		}
-		sci_base_state_machine_change_state(
-				&sci_phy->starting_substate_machine,
-				state);
-		result = SCI_SUCCESS;
-	} else
-		dev_warn(sciphy_to_dev(sci_phy),
-			"%s: PHY starting substate machine received "
-			"unexpected frame id %x\n",
-			__func__,
-			frame_index);
-
-	scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy),
-					  frame_index);
-
-	return result;
-}
-
-/**
- *
- * @phy: This is struct scic_sds_phy object which is being requested to decode the
- *    frame data.
- * @frame_index: This is the index of the unsolicited frame which was received
- *    for this phy.
- *
- * This method decodes the unsolicited frame when the struct scic_sds_phy is in the
- * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Get the UF Header - If
- * the UF is an SIGNATURE FIS - Copy IAF data to local phy object SIGNATURE FIS
- * data buffer. - else - log warning message of unexpected unsolicted frame -
- * release frame buffer enum sci_status SCI_SUCCESS Must decode the SIGNATURE FIS
- * data
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handler(
-	struct scic_sds_phy *sci_phy,
-	u32 frame_index)
-{
-	enum sci_status result;
-	struct dev_to_host_fis *frame_header;
-	u32 *fis_frame_data;
-	struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
-
-	result = scic_sds_unsolicited_frame_control_get_header(
-		&(scic_sds_phy_get_controller(sci_phy)->uf_control),
-		frame_index,
-		(void **)&frame_header);
-
-	if (result != SCI_SUCCESS)
-		return result;
-
-	if ((frame_header->fis_type == FIS_REGD2H) &&
-	    !(frame_header->status & ATA_BUSY)) {
-		scic_sds_unsolicited_frame_control_get_buffer(
-			&(scic_sds_phy_get_controller(sci_phy)->uf_control),
-			frame_index,
-			(void **)&fis_frame_data);
-
-		scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis,
-						       frame_header,
-						       fis_frame_data);
-
-		/* got IAF we can now go to the await spinup semaphore state */
-		sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
-						    SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
-
-		result = SCI_SUCCESS;
-	} else
-		dev_warn(sciphy_to_dev(sci_phy),
-			 "%s: PHY starting substate machine received "
-			 "unexpected frame id %x\n",
-			 __func__,
-			 frame_index);
-
-	/* Regardless of the result we are done with this frame with it */
-	scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy),
-					  frame_index);
-
-	return result;
-}
-
-/*
- * *****************************************************************************
- * * SCIC SDS PHY POWER_HANDLERS
- * ***************************************************************************** */
-
-/*
- * This method is called by the struct scic_sds_controller when the phy object is
- * granted power. - The notify enable spinups are turned on for this phy object
- * - The phy state machine is transitioned to the
- * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler(
-	struct scic_sds_phy *sci_phy)
-{
-	u32 enable_spinup;
-
-	enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control);
-	enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE);
-	writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control);
-
-	/* Change state to the final state this substate machine has run to completion */
-	sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
-					    SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
-
-	return SCI_SUCCESS;
-}
-
-/*
- * This method is called by the struct scic_sds_controller when the phy object is
- * granted power. - The phy state machine is transitioned to the
- * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler(
-	struct scic_sds_phy *sci_phy)
-{
-	u32 scu_sas_pcfg_value;
-
-	/* Release the spinup hold state and reset the OOB state machine */
-	scu_sas_pcfg_value =
-		readl(&sci_phy->link_layer_registers->phy_configuration);
-	scu_sas_pcfg_value &=
-		~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE));
-	scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
-	writel(scu_sas_pcfg_value,
-		&sci_phy->link_layer_registers->phy_configuration);
-
-	/* Now restart the OOB operation */
-	scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
-	scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
-	writel(scu_sas_pcfg_value,
-		&sci_phy->link_layer_registers->phy_configuration);
-
-	/* Change state to the final state this substate machine has run to completion */
-	sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
-					    SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);
-
-	return SCI_SUCCESS;
-}
-
-static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy,
-					   const char *func)
-{
-	dev_dbg(sciphy_to_dev(sci_phy),
-		 "%s: in wrong state: %d\n", func,
-		 sci_base_state_machine_get_state(&sci_phy->state_machine));
-	return SCI_FAILURE_INVALID_STATE;
-}
-
-static enum sci_status
-scic_sds_phy_default_start_handler(struct scic_sds_phy *sci_phy)
-{
-	return default_phy_handler(sci_phy, __func__);
-}
-
-static enum sci_status
-scic_sds_phy_default_stop_handler(struct scic_sds_phy *sci_phy)
-{
-	return default_phy_handler(sci_phy, __func__);
-}
-
-static enum sci_status
-scic_sds_phy_default_reset_handler(struct scic_sds_phy *sci_phy)
-{
-	return default_phy_handler(sci_phy, __func__);
-}
-
-static enum sci_status
-scic_sds_phy_default_destroy_handler(struct scic_sds_phy *sci_phy)
-{
-	return default_phy_handler(sci_phy, __func__);
-}
-
-static enum sci_status
-scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy,
-				   u32 frame_index)
-{
-	struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy);
-
-	default_phy_handler(sci_phy, __func__);
-	scic_sds_controller_release_frame(scic, frame_index);
-
-	return SCI_FAILURE_INVALID_STATE;
-}
-
-static enum sci_status
-scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy,
-				   u32 event_code)
-{
-	return default_phy_handler(sci_phy, __func__);
-}
-
-static enum sci_status
-scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy)
-{
-	return default_phy_handler(sci_phy, __func__);
-}
-
-
-
-static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = {
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = {
-		.start_handler		= scic_sds_phy_default_start_handler,
-		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
-		.reset_handler		= scic_sds_phy_default_reset_handler,
-		.destruct_handler	= scic_sds_phy_default_destroy_handler,
-		.frame_handler		= scic_sds_phy_default_frame_handler,
-		.event_handler		= scic_sds_phy_default_event_handler,
-		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = {
-		.start_handler		= scic_sds_phy_default_start_handler,
-		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
-		.reset_handler		= scic_sds_phy_default_reset_handler,
-		.destruct_handler	= scic_sds_phy_default_destroy_handler,
-		.frame_handler		= scic_sds_phy_default_frame_handler,
-		.event_handler		= scic_sds_phy_starting_substate_await_ossp_event_handler,
-		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = {
-		.start_handler		= scic_sds_phy_default_start_handler,
-		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
-		.reset_handler		= scic_sds_phy_default_reset_handler,
-		.destruct_handler	= scic_sds_phy_default_destroy_handler,
-		.frame_handler		= scic_sds_phy_default_frame_handler,
-		.event_handler		= scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler,
-		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = {
-		.start_handler		= scic_sds_phy_default_start_handler,
-		.stop_handler		= scic_sds_phy_default_stop_handler,
-		.reset_handler		= scic_sds_phy_default_reset_handler,
-		.destruct_handler	= scic_sds_phy_default_destroy_handler,
-		.frame_handler		= scic_sds_phy_starting_substate_await_iaf_uf_frame_handler,
-		.event_handler		= scic_sds_phy_starting_substate_await_iaf_uf_event_handler,
-		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = {
-		.start_handler		= scic_sds_phy_default_start_handler,
-		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
-		.reset_handler		= scic_sds_phy_default_reset_handler,
-		.destruct_handler	= scic_sds_phy_default_destroy_handler,
-		.frame_handler		= scic_sds_phy_default_frame_handler,
-		.event_handler		= scic_sds_phy_starting_substate_await_sas_power_event_handler,
-		.consume_power_handler	= scic_sds_phy_starting_substate_await_sas_power_consume_power_handler
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = {
-		.start_handler		= scic_sds_phy_default_start_handler,
-		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
-		.reset_handler		= scic_sds_phy_default_reset_handler,
-		.destruct_handler	= scic_sds_phy_default_destroy_handler,
-		.frame_handler		= scic_sds_phy_default_frame_handler,
-		.event_handler		= scic_sds_phy_starting_substate_await_sata_power_event_handler,
-		.consume_power_handler	= scic_sds_phy_starting_substate_await_sata_power_consume_power_handler
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = {
-		.start_handler		= scic_sds_phy_default_start_handler,
-		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
-		.reset_handler		= scic_sds_phy_default_reset_handler,
-		.destruct_handler	= scic_sds_phy_default_destroy_handler,
-		.frame_handler		= scic_sds_phy_default_frame_handler,
-		.event_handler		= scic_sds_phy_starting_substate_await_sata_phy_event_handler,
-		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = {
-		.start_handler		= scic_sds_phy_default_start_handler,
-		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
-		.reset_handler		= scic_sds_phy_default_reset_handler,
-		.destruct_handler	= scic_sds_phy_default_destroy_handler,
-		.frame_handler		= scic_sds_phy_default_frame_handler,
-		.event_handler		= scic_sds_phy_starting_substate_await_sata_speed_event_handler,
-		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = {
-		.start_handler		= scic_sds_phy_default_start_handler,
-		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
-		.reset_handler		= scic_sds_phy_default_reset_handler,
-		.destruct_handler	= scic_sds_phy_default_destroy_handler,
-		.frame_handler		= scic_sds_phy_starting_substate_await_sig_fis_frame_handler,
-		.event_handler		= scic_sds_phy_starting_substate_await_sig_fis_event_handler,
-		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = {
-		.start_handler		= scic_sds_phy_default_start_handler,
-		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
-		.reset_handler		= scic_sds_phy_default_reset_handler,
-		.destruct_handler	= scic_sds_phy_default_destroy_handler,
-		.frame_handler		 = scic_sds_phy_default_frame_handler,
-		.event_handler		 = scic_sds_phy_default_event_handler,
-		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
-	}
-};
-
-/**
- * scic_sds_phy_set_starting_substate_handlers() -
- *
- * This macro sets the starting substate handlers by state_id
- */
-#define scic_sds_phy_set_starting_substate_handlers(phy, state_id) \
-	scic_sds_phy_set_state_handlers(\
-		(phy), \
-		&scic_sds_phy_starting_substate_handler_table[(state_id)] \
-		)
-
-/*
- * ****************************************************************************
- * *  PHY STARTING SUBSTATE METHODS
- * **************************************************************************** */
-
-/**
- * scic_sds_phy_starting_initial_substate_enter -
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state
- * handlers are put in place for the struct scic_sds_phy object. - The state is
- * changed to the wait phy type event notification. none
- */
-static void scic_sds_phy_starting_initial_substate_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_starting_substate_handlers(
-		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL);
-
-	/* This is just an temporary state go off to the starting state */
-	sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
-					    SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
-static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_starting_substate_handlers(
-		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN
-		);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
-static void scic_sds_phy_starting_await_sas_speed_en_substate_enter(
-		void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_starting_substate_handlers(
-		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN
-		);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
-static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_starting_substate_handlers(
-		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF
-		);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the
- * struct scic_sds_phy object state handlers for this state. - Add this phy object to
- * the power control queue none
- */
-static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_starting_substate_handlers(
-		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER
-		);
-
-	scic_sds_controller_power_control_queue_insert(
-		scic_sds_phy_get_controller(sci_phy),
-		sci_phy
-		);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the
- * struct scic_sds_phy object from the power control queue. none
- */
-static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_controller_power_control_queue_remove(
-		scic_sds_phy_get_controller(sci_phy), sci_phy
-		);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the
- * struct scic_sds_phy object state handlers for this state. - Add this phy object to
- * the power control queue none
- */
-static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_starting_substate_handlers(
-		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER
-		);
-
-	scic_sds_controller_power_control_queue_insert(
-		scic_sds_phy_get_controller(sci_phy),
-		sci_phy
-		);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the
- * struct scic_sds_phy object from the power control queue. none
- */
-static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_controller_power_control_queue_remove(
-		scic_sds_phy_get_controller(sci_phy),
-		sci_phy
-		);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
-static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_starting_substate_handlers(
-			sci_phy,
-			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);
-
-	isci_timer_start(sci_phy->sata_timeout_timer,
-			 SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy
- * on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer
- * that was started on entry to await sata phy event notification none
- */
-static inline void scic_sds_phy_starting_await_sata_phy_substate_exit(
-		void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	isci_timer_stop(sci_phy->sata_timeout_timer);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
-static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_starting_substate_handlers(
-			sci_phy,
-			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN);
-
-	isci_timer_start(sci_phy->sata_timeout_timer,
-			 SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the
- * struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer
- * that was started on entry to await sata phy event notification none
- */
-static inline void scic_sds_phy_starting_await_sata_speed_substate_exit(
-	void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	isci_timer_stop(sci_phy->sata_timeout_timer);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the
- * struct scic_sds_phy object state handlers for this state.
- * - Start the SIGNATURE FIS
- * timeout timer none
- */
-static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object)
-{
-	bool continue_to_ready_state;
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_starting_substate_handlers(
-			sci_phy,
-			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
-
-	continue_to_ready_state = scic_sds_port_link_detected(
-		sci_phy->owning_port,
-		sci_phy);
-
-	if (continue_to_ready_state) {
-		/*
-		 * Clear the PE suspend condition so we can actually
-		 * receive SIG FIS
-		 * The hardware will not respond to the XRDY until the PE
-		 * suspend condition is cleared.
-		 */
-		scic_sds_phy_resume(sci_phy);
-
-		isci_timer_start(sci_phy->sata_timeout_timer,
-				 SCIC_SDS_SIGNATURE_FIS_TIMEOUT);
-	} else
-		sci_phy->is_in_link_training = false;
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the
- * struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE
- * FIS timeout timer. none
- */
-static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(
-	void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	isci_timer_stop(sci_phy->sata_timeout_timer);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy
- * object state handlers for this state. - Change base state machine to the
- * ready state. none
- */
-static void scic_sds_phy_starting_final_substate_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_starting_substate_handlers(sci_phy,
-						    SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
-
-	/* State machine has run to completion so exit out and change
-	 * the base state machine to the ready state
-	 */
-	sci_base_state_machine_change_state(&sci_phy->state_machine,
-					    SCI_BASE_PHY_STATE_READY);
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct sci_base_state scic_sds_phy_starting_substates[] = {
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = {
-		.enter_state = scic_sds_phy_starting_initial_substate_enter,
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = {
-		.enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter,
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = {
-		.enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter,
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = {
-		.enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter,
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = {
-		.enter_state = scic_sds_phy_starting_await_sas_power_substate_enter,
-		.exit_state  = scic_sds_phy_starting_await_sas_power_substate_exit,
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = {
-		.enter_state = scic_sds_phy_starting_await_sata_power_substate_enter,
-		.exit_state  = scic_sds_phy_starting_await_sata_power_substate_exit
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = {
-		.enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter,
-		.exit_state  = scic_sds_phy_starting_await_sata_phy_substate_exit
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = {
-		.enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter,
-		.exit_state  = scic_sds_phy_starting_await_sata_speed_substate_exit
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = {
-		.enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter,
-		.exit_state  = scic_sds_phy_starting_await_sig_fis_uf_substate_exit
-	},
-	[SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = {
-		.enter_state = scic_sds_phy_starting_final_substate_enter,
-	}
-};
-
-/*
- * This method takes the struct scic_sds_phy from a stopped state and
- * attempts to start it. - The phy state machine is transitioned to the
- * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS
- */
-static enum sci_status
-scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy)
-{
-	struct isci_host *ihost;
-	struct scic_sds_controller *scic;
-
-	scic = scic_sds_phy_get_controller(sci_phy),
-	ihost = scic_to_ihost(scic);
-
-	/* Create the SIGNATURE FIS Timeout timer for this phy */
-	sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy,
-							scic_sds_phy_sata_timeout);
-
-	if (sci_phy->sata_timeout_timer)
-		sci_base_state_machine_change_state(&sci_phy->state_machine,
-						    SCI_BASE_PHY_STATE_STARTING);
-
-	return SCI_SUCCESS;
-}
-
-static enum sci_status
-scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy)
-{
-	return SCI_SUCCESS;
-}
-
-static enum sci_status
-scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy)
-{
-	sci_base_state_machine_change_state(&sci_phy->state_machine,
-					    SCI_BASE_PHY_STATE_STOPPED);
-
-	return SCI_SUCCESS;
-}
-
-static enum sci_status
-scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy)
-{
-	sci_base_state_machine_change_state(&sci_phy->state_machine,
-					    SCI_BASE_PHY_STATE_RESETTING);
-
-	return SCI_SUCCESS;
-}
-
-/**
- * scic_sds_phy_ready_state_event_handler -
- * @phy: This is the struct scic_sds_phy object which has received the event.
- *
- * This method request the struct scic_sds_phy handle the received event.  The only
- * event that we are interested in while in the ready state is the link failure
- * event. - decoded event is a link failure - transition the struct scic_sds_phy back
- * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will
- * report a warning message enum sci_status SCI_SUCCESS if the event received is a
- * link failure SCI_FAILURE_INVALID_STATE for any other event received.
- */
-static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy,
-							      u32 event_code)
-{
-	enum sci_status result = SCI_FAILURE;
-
-	switch (scu_get_event_code(event_code)) {
-	case SCU_EVENT_LINK_FAILURE:
-		/* Link failure change state back to the starting state */
-		sci_base_state_machine_change_state(&sci_phy->state_machine,
-						    SCI_BASE_PHY_STATE_STARTING);
-		result = SCI_SUCCESS;
-		break;
-
-	case SCU_EVENT_BROADCAST_CHANGE:
-		/* Broadcast change received. Notify the port. */
-		if (scic_sds_phy_get_port(sci_phy) != NULL)
-			scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy);
-		else
-			sci_phy->bcn_received_while_port_unassigned = true;
-		break;
-
-	default:
-		dev_warn(sciphy_to_dev(sci_phy),
-			 "%sP SCIC PHY 0x%p ready state machine received "
-			 "unexpected event_code %x\n",
-			 __func__, sci_phy, event_code);
-
-		result = SCI_FAILURE_INVALID_STATE;
-		break;
-	}
-
-	return result;
-}
-
-static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy,
-								  u32 event_code)
-{
-	enum sci_status result = SCI_FAILURE;
-
-	switch (scu_get_event_code(event_code)) {
-	case SCU_EVENT_HARD_RESET_TRANSMITTED:
-		/* Link failure change state back to the starting state */
-		sci_base_state_machine_change_state(&sci_phy->state_machine,
-						    SCI_BASE_PHY_STATE_STARTING);
-		result = SCI_SUCCESS;
-		break;
-
-	default:
-		dev_warn(sciphy_to_dev(sci_phy),
-			 "%s: SCIC PHY 0x%p resetting state machine received "
-			 "unexpected event_code %x\n",
-			 __func__, sci_phy, event_code);
-
-		result = SCI_FAILURE_INVALID_STATE;
-		break;
-	}
-
-	return result;
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = {
-	[SCI_BASE_PHY_STATE_INITIAL] = {
-		.start_handler = scic_sds_phy_default_start_handler,
-		.stop_handler  = scic_sds_phy_default_stop_handler,
-		.reset_handler = scic_sds_phy_default_reset_handler,
-		.destruct_handler = scic_sds_phy_default_destroy_handler,
-		.frame_handler		 = scic_sds_phy_default_frame_handler,
-		.event_handler		 = scic_sds_phy_default_event_handler,
-		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
-	},
-	[SCI_BASE_PHY_STATE_STOPPED]  = {
-		.start_handler = scic_sds_phy_stopped_state_start_handler,
-		.stop_handler  = scic_sds_phy_default_stop_handler,
-		.reset_handler = scic_sds_phy_default_reset_handler,
-		.destruct_handler = scic_sds_phy_stopped_state_destroy_handler,
-		.frame_handler		 = scic_sds_phy_default_frame_handler,
-		.event_handler		 = scic_sds_phy_default_event_handler,
-		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
-	},
-	[SCI_BASE_PHY_STATE_STARTING] = {
-		.start_handler = scic_sds_phy_default_start_handler,
-		.stop_handler  = scic_sds_phy_default_stop_handler,
-		.reset_handler = scic_sds_phy_default_reset_handler,
-		.destruct_handler = scic_sds_phy_default_destroy_handler,
-		.frame_handler		 = scic_sds_phy_default_frame_handler,
-		.event_handler		 = scic_sds_phy_default_event_handler,
-		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
-	},
-	[SCI_BASE_PHY_STATE_READY] = {
-		.start_handler = scic_sds_phy_default_start_handler,
-		.stop_handler  = scic_sds_phy_ready_state_stop_handler,
-		.reset_handler = scic_sds_phy_ready_state_reset_handler,
-		.destruct_handler = scic_sds_phy_default_destroy_handler,
-		.frame_handler		 = scic_sds_phy_default_frame_handler,
-		.event_handler		 = scic_sds_phy_ready_state_event_handler,
-		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
-	},
-	[SCI_BASE_PHY_STATE_RESETTING] = {
-		.start_handler = scic_sds_phy_default_start_handler,
-		.stop_handler  = scic_sds_phy_default_stop_handler,
-		.reset_handler = scic_sds_phy_default_reset_handler,
-		.destruct_handler = scic_sds_phy_default_destroy_handler,
-		.frame_handler		 = scic_sds_phy_default_frame_handler,
-		.event_handler		 = scic_sds_phy_resetting_state_event_handler,
-		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
-	},
-	[SCI_BASE_PHY_STATE_FINAL] = {
-		.start_handler = scic_sds_phy_default_start_handler,
-		.stop_handler  = scic_sds_phy_default_stop_handler,
-		.reset_handler = scic_sds_phy_default_reset_handler,
-		.destruct_handler = scic_sds_phy_default_destroy_handler,
-		.frame_handler		 = scic_sds_phy_default_frame_handler,
-		.event_handler		 = scic_sds_phy_default_event_handler,
-		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
-	}
-};
-
-/*
- * ****************************************************************************
- * *  PHY STATE PRIVATE METHODS
- * **************************************************************************** */
-
-/**
- *
- * @sci_phy: This is the struct scic_sds_phy object to stop.
- *
- * This method will stop the struct scic_sds_phy object. This does not reset the
- * protocol engine it just suspends it and places it in a state where it will
- * not cause the end device to power up. none
- */
-static void scu_link_layer_stop_protocol_engine(
-	struct scic_sds_phy *sci_phy)
-{
-	u32 scu_sas_pcfg_value;
-	u32 enable_spinup_value;
-
-	/* Suspend the protocol engine and place it in a sata spinup hold state */
-	scu_sas_pcfg_value =
-		readl(&sci_phy->link_layer_registers->phy_configuration);
-	scu_sas_pcfg_value |=
-		(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
-		 SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) |
-		 SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD));
-	writel(scu_sas_pcfg_value,
-	       &sci_phy->link_layer_registers->phy_configuration);
-
-	/* Disable the notify enable spinup primitives */
-	enable_spinup_value = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control);
-	enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE);
-	writel(enable_spinup_value, &sci_phy->link_layer_registers->notify_enable_spinup_control);
-}
-
-/**
- *
- *
- * This method will start the OOB/SN state machine for this struct scic_sds_phy object.
- */
-static void scu_link_layer_start_oob(
-	struct scic_sds_phy *sci_phy)
-{
-	u32 scu_sas_pcfg_value;
-
-	scu_sas_pcfg_value =
-		readl(&sci_phy->link_layer_registers->phy_configuration);
-	scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
-	scu_sas_pcfg_value &=
-		~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
-		SCU_SAS_PCFG_GEN_BIT(HARD_RESET));
-	writel(scu_sas_pcfg_value,
-	       &sci_phy->link_layer_registers->phy_configuration);
-}
-
-/**
- *
- *
- * This method will transmit a hard reset request on the specified phy. The SCU
- * hardware requires that we reset the OOB state machine and set the hard reset
- * bit in the phy configuration register. We then must start OOB over with the
- * hard reset bit set.
- */
-static void scu_link_layer_tx_hard_reset(
-	struct scic_sds_phy *sci_phy)
-{
-	u32 phy_configuration_value;
-
-	/*
-	 * SAS Phys must wait for the HARD_RESET_TX event notification to transition
-	 * to the starting state. */
-	phy_configuration_value =
-		readl(&sci_phy->link_layer_registers->phy_configuration);
-	phy_configuration_value |=
-		(SCU_SAS_PCFG_GEN_BIT(HARD_RESET) |
-		 SCU_SAS_PCFG_GEN_BIT(OOB_RESET));
-	writel(phy_configuration_value,
-	       &sci_phy->link_layer_registers->phy_configuration);
-
-	/* Now take the OOB state machine out of reset */
-	phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
-	phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
-	writel(phy_configuration_value,
-	       &sci_phy->link_layer_registers->phy_configuration);
-}
-
-/*
- * ****************************************************************************
- * *  PHY BASE STATE METHODS
- * **************************************************************************** */
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state
- * handlers for the phy object base state machine initial state. none
- */
-static void scic_sds_phy_initial_state_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state
- * handlers for the phy object base state machine initial state. - The SCU
- * hardware is requested to stop the protocol engine. none
- */
-static void scic_sds_phy_stopped_state_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-	struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy);
-	struct isci_host *ihost = scic_to_ihost(scic);
-
-	/*
-	 * @todo We need to get to the controller to place this PE in a
-	 * reset state
-	 */
-
-	scic_sds_phy_set_base_state_handlers(sci_phy,
-					     SCI_BASE_PHY_STATE_STOPPED);
-
-	if (sci_phy->sata_timeout_timer != NULL) {
-		isci_del_timer(ihost, sci_phy->sata_timeout_timer);
-
-		sci_phy->sata_timeout_timer = NULL;
-	}
-
-	scu_link_layer_stop_protocol_engine(sci_phy);
-
-	if (sci_phy->state_machine.previous_state_id !=
-			SCI_BASE_PHY_STATE_INITIAL)
-		scic_sds_controller_link_down(
-				scic_sds_phy_get_controller(sci_phy),
-				scic_sds_phy_get_port(sci_phy),
-				sci_phy);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state
- * handlers for the phy object base state machine starting state. - The SCU
- * hardware is requested to start OOB/SN on this protocl engine. - The phy
- * starting substate machine is started. - If the previous state was the ready
- * state then the struct scic_sds_controller is informed that the phy has gone link
- * down. none
- */
-static void scic_sds_phy_starting_state_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING);
-
-	scu_link_layer_stop_protocol_engine(sci_phy);
-	scu_link_layer_start_oob(sci_phy);
-
-	/* We don't know what kind of phy we are going to be just yet */
-	sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
-	sci_phy->bcn_received_while_port_unassigned = false;
-
-	/* Change over to the starting substate machine to continue */
-	sci_base_state_machine_start(&sci_phy->starting_substate_machine);
-
-	if (sci_phy->state_machine.previous_state_id
-	    == SCI_BASE_PHY_STATE_READY) {
-		scic_sds_controller_link_down(
-			scic_sds_phy_get_controller(sci_phy),
-			scic_sds_phy_get_port(sci_phy),
-			sci_phy
-			);
-	}
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state
- * handlers for the phy object base state machine ready state. - The SCU
- * hardware protocol engine is resumed. - The struct scic_sds_controller is informed
- * that the phy object has gone link up. none
- */
-static void scic_sds_phy_ready_state_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY);
-
-	scic_sds_controller_link_up(
-		scic_sds_phy_get_controller(sci_phy),
-		scic_sds_phy_get_port(sci_phy),
-		sci_phy
-		);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on exiting
- * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware
- * protocol engine represented by this struct scic_sds_phy object. none
- */
-static void scic_sds_phy_ready_state_exit(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_suspend(sci_phy);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state
- * handlers for the phy object base state machine resetting state. none
- */
-static void scic_sds_phy_resetting_state_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING);
-
-	/*
-	 * The phy is being reset, therefore deactivate it from the port.
-	 * In the resetting state we don't notify the user regarding
-	 * link up and link down notifications. */
-	scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false);
-
-	if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
-		scu_link_layer_tx_hard_reset(sci_phy);
-	} else {
-		/*
-		 * The SCU does not need to have a discrete reset state so
-		 * just go back to the starting state.
-		 */
-		sci_base_state_machine_change_state(
-				&sci_phy->state_machine,
-				SCI_BASE_PHY_STATE_STARTING);
-	}
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state
- * handlers for the phy object base state machine final state. none
- */
-static void scic_sds_phy_final_state_enter(void *object)
-{
-	struct scic_sds_phy *sci_phy = object;
-
-	scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL);
-
-	/* Nothing to do here */
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct sci_base_state scic_sds_phy_state_table[] = {
-	[SCI_BASE_PHY_STATE_INITIAL] = {
-		.enter_state = scic_sds_phy_initial_state_enter,
-	},
-	[SCI_BASE_PHY_STATE_STOPPED] = {
-		.enter_state = scic_sds_phy_stopped_state_enter,
-	},
-	[SCI_BASE_PHY_STATE_STARTING] = {
-		.enter_state = scic_sds_phy_starting_state_enter,
-	},
-	[SCI_BASE_PHY_STATE_READY] = {
-		.enter_state = scic_sds_phy_ready_state_enter,
-		.exit_state = scic_sds_phy_ready_state_exit,
-	},
-	[SCI_BASE_PHY_STATE_RESETTING] = {
-		.enter_state = scic_sds_phy_resetting_state_enter,
-	},
-	[SCI_BASE_PHY_STATE_FINAL] = {
-		.enter_state = scic_sds_phy_final_state_enter,
-	},
-};
-
-void scic_sds_phy_construct(struct scic_sds_phy *sci_phy,
-			    struct scic_sds_port *owning_port, u8 phy_index)
-{
-	sci_base_state_machine_construct(&sci_phy->state_machine,
-					 sci_phy,
-					 scic_sds_phy_state_table,
-					 SCI_BASE_PHY_STATE_INITIAL);
-
-	sci_base_state_machine_start(&sci_phy->state_machine);
-
-	/* Copy the rest of the input data to our locals */
-	sci_phy->owning_port = owning_port;
-	sci_phy->phy_index = phy_index;
-	sci_phy->bcn_received_while_port_unassigned = false;
-	sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
-	sci_phy->link_layer_registers = NULL;
-	sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
-	sci_phy->sata_timeout_timer = NULL;
-
-	/* Initialize the the substate machines */
-	sci_base_state_machine_construct(&sci_phy->starting_substate_machine,
-					 sci_phy,
-					 scic_sds_phy_starting_substates,
-					 SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL);
-}
diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h
deleted file mode 100644
index 0d7bab3fc93b..000000000000
--- a/drivers/scsi/isci/core/scic_sds_phy.h
+++ /dev/null
@@ -1,439 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SCIC_SDS_PHY_H_
-#define _SCIC_SDS_PHY_H_
-
-#include "sas.h"
-#include "scic_phy.h"
-#include "registers.h"
-#include "state_machine.h"
-#include <scsi/libsas.h>
-
-struct scic_sds_port;
-/**
- *
- *
- * This is the timeout value for the SATA phy to wait for a SIGNATURE FIS
- * before restarting the starting state machine.  Technically, the old parallel
- * ATA specification required up to 30 seconds for a device to issue its
- * signature FIS as a result of a soft reset.  Now we see that devices respond
- * generally within 15 seconds, but we'll use 25 for now.
- */
-#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT    25000
-
-/**
- *
- *
- * This is the timeout for the SATA OOB/SN because the hardware does not
- * recognize a hot plug after OOB signal but before the SN signals.  We need to
- * make sure after a hotplug timeout if we have not received the speed event
- * notification from the hardware that we restart the hardware OOB state
- * machine.
- */
-#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT  250
-
-enum scic_sds_phy_states {
-	/**
-	 * Simply the initial state for the base domain state machine.
-	 */
-	SCI_BASE_PHY_STATE_INITIAL,
-
-	/**
-	 * This state indicates that the phy has successfully been stopped.
-	 * In this state no new IO operations are permitted on this phy.
-	 * This state is entered from the INITIAL state.
-	 * This state is entered from the STARTING state.
-	 * This state is entered from the READY state.
-	 * This state is entered from the RESETTING state.
-	 */
-	SCI_BASE_PHY_STATE_STOPPED,
-
-	/**
-	 * This state indicates that the phy is in the process of becomming
-	 * ready.  In this state no new IO operations are permitted on this phy.
-	 * This state is entered from the STOPPED state.
-	 * This state is entered from the READY state.
-	 * This state is entered from the RESETTING state.
-	 */
-	SCI_BASE_PHY_STATE_STARTING,
-
-	/**
-	 * This state indicates the the phy is now ready.  Thus, the user
-	 * is able to perform IO operations utilizing this phy as long as it
-	 * is currently part of a valid port.
-	 * This state is entered from the STARTING state.
-	 */
-	SCI_BASE_PHY_STATE_READY,
-
-	/**
-	 * This state indicates that the phy is in the process of being reset.
-	 * In this state no new IO operations are permitted on this phy.
-	 * This state is entered from the READY state.
-	 */
-	SCI_BASE_PHY_STATE_RESETTING,
-
-	/**
-	 * Simply the final state for the base phy state machine.
-	 */
-	SCI_BASE_PHY_STATE_FINAL,
-};
-
-
-/**
- * enum scic_sds_phy_starting_substates -
- *
- *
- */
-enum scic_sds_phy_starting_substates {
-	/**
-	 * Initial state
-	 */
-	SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL,
-
-	/**
-	 * Wait state for the hardware OSSP event type notification
-	 */
-	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN,
-
-	/**
-	 * Wait state for the PHY speed notification
-	 */
-	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN,
-
-	/**
-	 * Wait state for the IAF Unsolicited frame notification
-	 */
-	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF,
-
-	/**
-	 * Wait state for the request to consume power
-	 */
-	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER,
-
-	/**
-	 * Wait state for request to consume power
-	 */
-	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER,
-
-	/**
-	 * Wait state for the SATA PHY notification
-	 */
-	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN,
-
-	/**
-	 * Wait for the SATA PHY speed notification
-	 */
-	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN,
-
-	/**
-	 * Wait state for the SIGNATURE FIS unsolicited frame notification
-	 */
-	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF,
-
-	/**
-	 * Exit state for this state machine
-	 */
-	SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL,
-};
-
-struct scic_sds_port;
-struct scic_sds_controller;
-
-/**
- * This enumeration provides a named phy type for the state machine
- *
- *
- */
-enum scic_sds_phy_protocol {
-	/**
-	 * This is an unknown phy type since there is either nothing on the other
-	 * end or we have not detected the phy type as yet.
-	 */
-	SCIC_SDS_PHY_PROTOCOL_UNKNOWN,
-
-	/**
-	 * This is a SAS PHY
-	 */
-	SCIC_SDS_PHY_PROTOCOL_SAS,
-
-	/**
-	 * This is a SATA PHY
-	 */
-	SCIC_SDS_PHY_PROTOCOL_SATA,
-
-	SCIC_SDS_MAX_PHY_PROTOCOLS
-};
-
-/**
- * struct scic_sds_phy - This structure  contains or references all of the data
- *    necessary to represent the core phy object and SCU harware protocol
- *    engine.
- *
- *
- */
-struct scic_sds_phy {
-	/**
-	 * This field contains the information for the base phy state machine.
-	 */
-	struct sci_base_state_machine state_machine;
-
-	/**
-	 * This field specifies the port object that owns/contains this phy.
-	 */
-	struct scic_sds_port *owning_port;
-
-	/**
-	 * This field indicates whether the phy supports 1.5 Gb/s, 3.0 Gb/s,
-	 * or 6.0 Gb/s operation.
-	 */
-	enum sas_linkrate max_negotiated_speed;
-
-	/**
-	 * This member specifies the protocol being utilized on this phy.  This
-	 * field contains a legitamite value once the PHY has link trained with
-	 * a remote phy.
-	 */
-	enum scic_sds_phy_protocol protocol;
-
-	/**
-	 * This field specifies the index with which this phy is associated (0-3).
-	 */
-	u8 phy_index;
-
-	/**
-	 * This member indicates if this particular PHY has received a BCN while
-	 * it had no port assignement.  This BCN will be reported once the phy is
-	 * assigned to a port.
-	 */
-	bool bcn_received_while_port_unassigned;
-
-	/**
-	 * This field indicates if this PHY is currently in the process of
-	 * link training (i.e. it has started OOB, but has yet to perform
-	 * IAF exchange/Signature FIS reception).
-	 */
-	bool is_in_link_training;
-
-	/**
-	 * This field contains a reference to the timer utilized in detecting
-	 * when a signature FIS timeout has occurred.  The signature FIS is the
-	 * first FIS sent by an attached SATA device after OOB/SN.
-	 */
-	void *sata_timeout_timer;
-
-	const struct scic_sds_phy_state_handler *state_handlers;
-
-	struct sci_base_state_machine starting_substate_machine;
-
-	/**
-	 * This field is the pointer to the transport layer register for the SCU
-	 * hardware.
-	 */
-	struct scu_transport_layer_registers __iomem *transport_layer_registers;
-
-	/**
-	 * This field points to the link layer register set within the SCU.
-	 */
-	struct scu_link_layer_registers __iomem *link_layer_registers;
-
-};
-
-typedef enum sci_status (*scic_sds_phy_handler_t)(struct scic_sds_phy *);
-typedef enum sci_status (*scic_sds_phy_event_handler_t)(struct scic_sds_phy *, u32);
-typedef enum sci_status (*scic_sds_phy_frame_handler_t)(struct scic_sds_phy *, u32);
-typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *);
-
-/**
- * struct scic_sds_phy_state_handler -
- *
- *
- */
-struct scic_sds_phy_state_handler {
-	/**
-	 * The start_handler specifies the method invoked when there is an
-	 * attempt to start a phy.
-	 */
-	scic_sds_phy_handler_t start_handler;
-
-	/**
-	 * The stop_handler specifies the method invoked when there is an
-	 * attempt to stop a phy.
-	 */
-	scic_sds_phy_handler_t stop_handler;
-
-	/**
-	 * The reset_handler specifies the method invoked when there is an
-	 * attempt to reset a phy.
-	 */
-	scic_sds_phy_handler_t reset_handler;
-
-	/**
-	 * The destruct_handler specifies the method invoked when attempting to
-	 * destruct a phy.
-	 */
-	scic_sds_phy_handler_t destruct_handler;
-
-	/**
-	 * The state handler for unsolicited frames received from the SCU hardware.
-	 */
-	scic_sds_phy_frame_handler_t frame_handler;
-
-	/**
-	 * The state handler for events received from the SCU hardware.
-	 */
-	scic_sds_phy_event_handler_t event_handler;
-
-	/**
-	 * The state handler for staggered spinup.
-	 */
-	scic_sds_phy_power_handler_t consume_power_handler;
-
-};
-
-/**
- * scic_sds_phy_get_index() -
- *
- * This macro returns the phy index for the specified phy
- */
-#define scic_sds_phy_get_index(phy) \
-	((phy)->phy_index)
-
-/**
- * scic_sds_phy_get_controller() - This macro returns the controller for this
- *    phy
- *
- *
- */
-#define scic_sds_phy_get_controller(phy) \
-	(scic_sds_port_get_controller((phy)->owning_port))
-
-/**
- * scic_sds_phy_set_state_handlers() - This macro sets the state handlers for
- *    this phy object
- *
- *
- */
-#define scic_sds_phy_set_state_handlers(phy, handlers) \
-	((phy)->state_handlers = (handlers))
-
-/**
- * scic_sds_phy_set_base_state_handlers() -
- *
- * This macro set the base state handlers for the phy object.
- */
-#define scic_sds_phy_set_base_state_handlers(phy, state_id) \
-	scic_sds_phy_set_state_handlers(\
-		(phy), \
-		&scic_sds_phy_state_handler_table[(state_id)] \
-		)
-
-void scic_sds_phy_construct(
-	struct scic_sds_phy *this_phy,
-	struct scic_sds_port *owning_port,
-	u8 phy_index);
-
-struct scic_sds_port *scic_sds_phy_get_port(
-	struct scic_sds_phy *this_phy);
-
-void scic_sds_phy_set_port(
-	struct scic_sds_phy *this_phy,
-	struct scic_sds_port *owning_port);
-
-enum sci_status scic_sds_phy_initialize(
-	struct scic_sds_phy *this_phy,
-	struct scu_transport_layer_registers __iomem *transport_layer_registers,
-	struct scu_link_layer_registers __iomem *link_layer_registers);
-
-enum sci_status scic_sds_phy_start(
-	struct scic_sds_phy *this_phy);
-
-enum sci_status scic_sds_phy_stop(
-	struct scic_sds_phy *this_phy);
-
-enum sci_status scic_sds_phy_reset(
-	struct scic_sds_phy *this_phy);
-
-void scic_sds_phy_resume(
-	struct scic_sds_phy *this_phy);
-
-void scic_sds_phy_setup_transport(
-	struct scic_sds_phy *this_phy,
-	u32 device_id);
-
-enum sci_status scic_sds_phy_event_handler(
-	struct scic_sds_phy *this_phy,
-	u32 event_code);
-
-enum sci_status scic_sds_phy_frame_handler(
-	struct scic_sds_phy *this_phy,
-	u32 frame_index);
-
-enum sci_status scic_sds_phy_consume_power_handler(
-	struct scic_sds_phy *this_phy);
-
-void scic_sds_phy_get_sas_address(
-	struct scic_sds_phy *this_phy,
-	struct sci_sas_address *sas_address);
-
-void scic_sds_phy_get_attached_sas_address(
-	struct scic_sds_phy *this_phy,
-	struct sci_sas_address *sas_address);
-
-void scic_sds_phy_get_protocols(
-	struct scic_sds_phy *sci_phy,
-	struct scic_phy_proto *protocols);
-
-#endif /* _SCIC_SDS_PHY_H_ */
diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c
index a9f3ce111b86..11b516a9a130 100644
--- a/drivers/scsi/isci/core/scic_sds_port.c
+++ b/drivers/scsi/isci/core/scic_sds_port.c
@@ -54,9 +54,7 @@
  */
 
 #include "host.h"
-#include "scic_phy.h"
 #include "scic_port.h"
-#include "scic_sds_phy.h"
 #include "scic_sds_port.h"
 #include "remote_device.h"
 #include "remote_node_context.h"
diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h
index 56a40a712589..7fd161700475 100644
--- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h
+++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h
@@ -64,7 +64,6 @@
  */
 
 #include "scic_sds_port.h"
-#include "scic_sds_phy.h"
 
 struct scic_sds_controller;
 struct scic_sds_port_configuration_agent;
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 1134395c970e..b92d51f25481 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -56,12 +56,2219 @@
 #include "isci.h"
 #include "host.h"
 #include "phy.h"
+#include "scu_event_codes.h"
 #include "scic_port.h"
 #include "scic_config_parameters.h"
+#include "timers.h"
 
-struct scic_sds_phy;
-extern enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy);
-extern enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy);
+/* Maximum arbitration wait time in micro-seconds */
+#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME  (700)
+
+enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy)
+{
+	return sci_phy->max_negotiated_speed;
+}
+
+/*
+ * *****************************************************************************
+ * * SCIC SDS PHY Internal Methods
+ * ***************************************************************************** */
+
+/**
+ * This method will initialize the phy transport layer registers
+ * @sci_phy:
+ * @transport_layer_registers
+ *
+ * enum sci_status
+ */
+static enum sci_status scic_sds_phy_transport_layer_initialization(
+	struct scic_sds_phy *sci_phy,
+	struct scu_transport_layer_registers __iomem *transport_layer_registers)
+{
+	u32 tl_control;
+
+	sci_phy->transport_layer_registers = transport_layer_registers;
+
+	writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX,
+		&sci_phy->transport_layer_registers->stp_rni);
+
+	/*
+	 * Hardware team recommends that we enable the STP prefetch for all
+	 * transports
+	 */
+	tl_control = readl(&sci_phy->transport_layer_registers->control);
+	tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH);
+	writel(tl_control, &sci_phy->transport_layer_registers->control);
+
+	return SCI_SUCCESS;
+}
+
+/**
+ * This method will initialize the phy link layer registers
+ * @sci_phy:
+ * @link_layer_registers:
+ *
+ * enum sci_status
+ */
+static enum sci_status
+scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
+				       struct scu_link_layer_registers __iomem *link_layer_registers)
+{
+	struct scic_sds_controller *scic =
+		sci_phy->owning_port->owning_controller;
+	int phy_idx = sci_phy->phy_index;
+	struct sci_phy_user_params *phy_user =
+		&scic->user_parameters.sds1.phys[phy_idx];
+	struct sci_phy_oem_params *phy_oem =
+		&scic->oem_parameters.sds1.phys[phy_idx];
+	u32 phy_configuration;
+	struct scic_phy_cap phy_cap;
+	u32 parity_check = 0;
+	u32 parity_count = 0;
+	u32 llctl, link_rate;
+	u32 clksm_value = 0;
+
+	sci_phy->link_layer_registers = link_layer_registers;
+
+	/* Set our IDENTIFY frame data */
+	#define SCI_END_DEVICE 0x01
+
+	writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) |
+	       SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) |
+	       SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) |
+	       SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) |
+	       SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE),
+	       &sci_phy->link_layer_registers->transmit_identification);
+
+	/* Write the device SAS Address */
+	writel(0xFEDCBA98,
+	       &sci_phy->link_layer_registers->sas_device_name_high);
+	writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low);
+
+	/* Write the source SAS Address */
+	writel(phy_oem->sas_address.high,
+		&sci_phy->link_layer_registers->source_sas_address_high);
+	writel(phy_oem->sas_address.low,
+		&sci_phy->link_layer_registers->source_sas_address_low);
+
+	/* Clear and Set the PHY Identifier */
+	writel(0, &sci_phy->link_layer_registers->identify_frame_phy_id);
+	writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx),
+		&sci_phy->link_layer_registers->identify_frame_phy_id);
+
+	/* Change the initial state of the phy configuration register */
+	phy_configuration =
+		readl(&sci_phy->link_layer_registers->phy_configuration);
+
+	/* Hold OOB state machine in reset */
+	phy_configuration |=  SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+	writel(phy_configuration,
+		&sci_phy->link_layer_registers->phy_configuration);
+
+	/* Configure the SNW capabilities */
+	phy_cap.all = 0;
+	phy_cap.start = 1;
+	phy_cap.gen3_no_ssc = 1;
+	phy_cap.gen2_no_ssc = 1;
+	phy_cap.gen1_no_ssc = 1;
+	if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) {
+		phy_cap.gen3_ssc = 1;
+		phy_cap.gen2_ssc = 1;
+		phy_cap.gen1_ssc = 1;
+	}
+
+	/*
+	 * The SAS specification indicates that the phy_capabilities that
+	 * are transmitted shall have an even parity.  Calculate the parity. */
+	parity_check = phy_cap.all;
+	while (parity_check != 0) {
+		if (parity_check & 0x1)
+			parity_count++;
+		parity_check >>= 1;
+	}
+
+	/*
+	 * If parity indicates there are an odd number of bits set, then
+	 * set the parity bit to 1 in the phy capabilities. */
+	if ((parity_count % 2) != 0)
+		phy_cap.parity = 1;
+
+	writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities);
+
+	/* Set the enable spinup period but disable the ability to send
+	 * notify enable spinup
+	 */
+	writel(SCU_ENSPINUP_GEN_VAL(COUNT,
+			phy_user->notify_enable_spin_up_insertion_frequency),
+		&sci_phy->link_layer_registers->notify_enable_spinup_control);
+
+	/* Write the ALIGN Insertion Ferequency for connected phy and
+	 * inpendent of connected state
+	 */
+	clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED,
+			phy_user->in_connection_align_insertion_frequency);
+
+	clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
+			phy_user->align_insertion_frequency);
+
+	writel(clksm_value, &sci_phy->link_layer_registers->clock_skew_management);
+
+	/* @todo Provide a way to write this register correctly */
+	writel(0x02108421,
+		&sci_phy->link_layer_registers->afe_lookup_table_control);
+
+	llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT,
+		(u8)scic->user_parameters.sds1.no_outbound_task_timeout);
+
+	switch(phy_user->max_speed_generation) {
+	case SCIC_SDS_PARM_GEN3_SPEED:
+		link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3;
+		break;
+	case SCIC_SDS_PARM_GEN2_SPEED:
+		link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2;
+		break;
+	default:
+		link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1;
+		break;
+	}
+	llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
+	writel(llctl, &sci_phy->link_layer_registers->link_layer_control);
+
+	if (is_a0() || is_a2()) {
+		/* Program the max ARB time for the PHY to 700us so we inter-operate with
+		 * the PMC expander which shuts down PHYs if the expander PHY generates too
+		 * many breaks.  This time value will guarantee that the initiator PHY will
+		 * generate the break.
+		 */
+		writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME,
+			&sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout);
+	}
+
+	/*
+	 * Set the link layer hang detection to 500ms (0x1F4) from its default
+	 * value of 128ms.  Max value is 511 ms.
+	 */
+	writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout);
+
+	/* We can exit the initial state to the stopped state */
+	sci_base_state_machine_change_state(&sci_phy->state_machine,
+					    SCI_BASE_PHY_STATE_STOPPED);
+
+	return SCI_SUCCESS;
+}
+
+/**
+ * This function will handle the sata SIGNATURE FIS timeout condition.  It will
+ * restart the starting substate machine since we dont know what has actually
+ * happening.
+ */
+static void scic_sds_phy_sata_timeout(void *phy)
+{
+	struct scic_sds_phy *sci_phy = phy;
+
+	dev_dbg(sciphy_to_dev(sci_phy),
+		 "%s: SCIC SDS Phy 0x%p did not receive signature fis before "
+		 "timeout.\n",
+		 __func__,
+		 sci_phy);
+
+	sci_base_state_machine_stop(&sci_phy->starting_substate_machine);
+
+	sci_base_state_machine_change_state(&sci_phy->state_machine,
+					    SCI_BASE_PHY_STATE_STARTING);
+}
+
+/**
+ * This method returns the port currently containing this phy. If the phy is
+ *    currently contained by the dummy port, then the phy is considered to not
+ *    be part of a port.
+ * @sci_phy: This parameter specifies the phy for which to retrieve the
+ *    containing port.
+ *
+ * This method returns a handle to a port that contains the supplied phy.
+ * NULL This value is returned if the phy is not part of a real
+ * port (i.e. it's contained in the dummy port). !NULL All other
+ * values indicate a handle/pointer to the port containing the phy.
+ */
+struct scic_sds_port *scic_sds_phy_get_port(
+	struct scic_sds_phy *sci_phy)
+{
+	if (scic_sds_port_get_index(sci_phy->owning_port) == SCIC_SDS_DUMMY_PORT)
+		return NULL;
+
+	return sci_phy->owning_port;
+}
+
+/**
+ * This method will assign a port to the phy object.
+ * @out]: sci_phy This parameter specifies the phy for which to assign a port
+ *    object.
+ *
+ *
+ */
+void scic_sds_phy_set_port(
+	struct scic_sds_phy *sci_phy,
+	struct scic_sds_port *sci_port)
+{
+	sci_phy->owning_port = sci_port;
+
+	if (sci_phy->bcn_received_while_port_unassigned) {
+		sci_phy->bcn_received_while_port_unassigned = false;
+		scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy);
+	}
+}
+
+/**
+ * This method will initialize the constructed phy
+ * @sci_phy:
+ * @link_layer_registers:
+ *
+ * enum sci_status
+ */
+enum sci_status scic_sds_phy_initialize(
+	struct scic_sds_phy *sci_phy,
+	struct scu_transport_layer_registers __iomem *transport_layer_registers,
+	struct scu_link_layer_registers __iomem *link_layer_registers)
+{
+	struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy);
+	struct isci_host *ihost = scic_to_ihost(scic);
+
+	/* Create the SIGNATURE FIS Timeout timer for this phy */
+	sci_phy->sata_timeout_timer =
+		isci_timer_create(
+			ihost,
+			sci_phy,
+			scic_sds_phy_sata_timeout);
+
+	/* Perfrom the initialization of the TL hardware */
+	scic_sds_phy_transport_layer_initialization(
+			sci_phy,
+			transport_layer_registers);
+
+	/* Perofrm the initialization of the PE hardware */
+	scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers);
+
+	/*
+	 * There is nothing that needs to be done in this state just
+	 * transition to the stopped state. */
+	sci_base_state_machine_change_state(&sci_phy->state_machine,
+					    SCI_BASE_PHY_STATE_STOPPED);
+
+	return SCI_SUCCESS;
+}
+
+/**
+ * This method assigns the direct attached device ID for this phy.
+ *
+ * @sci_phy The phy for which the direct attached device id is to
+ *       be assigned.
+ * @device_id The direct attached device ID to assign to the phy.
+ *       This will either be the RNi for the device or an invalid RNi if there
+ *       is no current device assigned to the phy.
+ */
+void scic_sds_phy_setup_transport(
+	struct scic_sds_phy *sci_phy,
+	u32 device_id)
+{
+	u32 tl_control;
+
+	writel(device_id, &sci_phy->transport_layer_registers->stp_rni);
+
+	/*
+	 * The read should guarantee that the first write gets posted
+	 * before the next write
+	 */
+	tl_control = readl(&sci_phy->transport_layer_registers->control);
+	tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE);
+	writel(tl_control, &sci_phy->transport_layer_registers->control);
+}
+
+/**
+ *
+ * @sci_phy: The phy object to be suspended.
+ *
+ * This function will perform the register reads/writes to suspend the SCU
+ * hardware protocol engine. none
+ */
+static void scic_sds_phy_suspend(
+	struct scic_sds_phy *sci_phy)
+{
+	u32 scu_sas_pcfg_value;
+
+	scu_sas_pcfg_value =
+		readl(&sci_phy->link_layer_registers->phy_configuration);
+	scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
+	writel(scu_sas_pcfg_value,
+		&sci_phy->link_layer_registers->phy_configuration);
+
+	scic_sds_phy_setup_transport(
+			sci_phy,
+			SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
+}
+
+void scic_sds_phy_resume(struct scic_sds_phy *sci_phy)
+{
+	u32 scu_sas_pcfg_value;
+
+	scu_sas_pcfg_value =
+		readl(&sci_phy->link_layer_registers->phy_configuration);
+	scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
+	writel(scu_sas_pcfg_value,
+		&sci_phy->link_layer_registers->phy_configuration);
+}
+
+void scic_sds_phy_get_sas_address(struct scic_sds_phy *sci_phy,
+				  struct sci_sas_address *sas_address)
+{
+	sas_address->high = readl(&sci_phy->link_layer_registers->source_sas_address_high);
+	sas_address->low = readl(&sci_phy->link_layer_registers->source_sas_address_low);
+}
+
+void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy,
+					   struct sci_sas_address *sas_address)
+{
+	struct sas_identify_frame *iaf;
+	struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
+
+	iaf = &iphy->frame_rcvd.iaf;
+	memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE);
+}
+
+void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy,
+				struct scic_phy_proto *protocols)
+{
+	protocols->all =
+		(u16)(readl(&sci_phy->
+			link_layer_registers->transmit_identification) &
+				0x0000FFFF);
+}
+
+/**
+ * This method will attempt to start the phy object. This request is only valid
+ *    when the phy is in the stopped state
+ * @sci_phy:
+ *
+ * enum sci_status
+ */
+enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy)
+{
+	return sci_phy->state_handlers->start_handler(sci_phy);
+}
+
+/**
+ * This method will attempt to stop the phy object.
+ * @sci_phy:
+ *
+ * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE
+ * if the phy is not in a valid state to stop
+ */
+enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy)
+{
+	return sci_phy->state_handlers->stop_handler(sci_phy);
+}
+
+/**
+ * This method will attempt to reset the phy.  This request is only valid when
+ *    the phy is in an ready state
+ * @sci_phy:
+ *
+ * enum sci_status
+ */
+enum sci_status scic_sds_phy_reset(
+	struct scic_sds_phy *sci_phy)
+{
+	return sci_phy->state_handlers->reset_handler(sci_phy);
+}
+
+/**
+ * This method will process the event code received.
+ * @sci_phy:
+ * @event_code:
+ *
+ * enum sci_status
+ */
+enum sci_status scic_sds_phy_event_handler(
+	struct scic_sds_phy *sci_phy,
+	u32 event_code)
+{
+	return sci_phy->state_handlers->event_handler(sci_phy, event_code);
+}
+
+/**
+ * This method will process the frame index received.
+ * @sci_phy:
+ * @frame_index:
+ *
+ * enum sci_status
+ */
+enum sci_status scic_sds_phy_frame_handler(
+	struct scic_sds_phy *sci_phy,
+	u32 frame_index)
+{
+	return sci_phy->state_handlers->frame_handler(sci_phy, frame_index);
+}
+
+/**
+ * This method will give the phy permission to consume power
+ * @sci_phy:
+ *
+ * enum sci_status
+ */
+enum sci_status scic_sds_phy_consume_power_handler(
+	struct scic_sds_phy *sci_phy)
+{
+	return sci_phy->state_handlers->consume_power_handler(sci_phy);
+}
+
+/*
+ * *****************************************************************************
+ * * SCIC SDS PHY HELPER FUNCTIONS
+ * ***************************************************************************** */
+
+
+/**
+ *
+ * @sci_phy: The phy object that received SAS PHY DETECTED.
+ *
+ * This method continues the link training for the phy as if it were a SAS PHY
+ * instead of a SATA PHY. This is done because the completion queue had a SAS
+ * PHY DETECTED event when the state machine was expecting a SATA PHY event.
+ * none
+ */
+static void scic_sds_phy_start_sas_link_training(
+	struct scic_sds_phy *sci_phy)
+{
+	u32 phy_control;
+
+	phy_control =
+		readl(&sci_phy->link_layer_registers->phy_configuration);
+	phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD);
+	writel(phy_control,
+		&sci_phy->link_layer_registers->phy_configuration);
+
+	sci_base_state_machine_change_state(
+		&sci_phy->starting_substate_machine,
+		SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN
+		);
+
+	sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS;
+}
+
+/**
+ *
+ * @sci_phy: The phy object that received a SATA SPINUP HOLD event
+ *
+ * This method continues the link training for the phy as if it were a SATA PHY
+ * instead of a SAS PHY.  This is done because the completion queue had a SATA
+ * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none
+ */
+static void scic_sds_phy_start_sata_link_training(
+	struct scic_sds_phy *sci_phy)
+{
+	sci_base_state_machine_change_state(
+		&sci_phy->starting_substate_machine,
+		SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER
+		);
+
+	sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;
+}
+
+/**
+ * scic_sds_phy_complete_link_training - perform processing common to
+ *    all protocols upon completion of link training.
+ * @sci_phy: This parameter specifies the phy object for which link training
+ *    has completed.
+ * @max_link_rate: This parameter specifies the maximum link rate to be
+ *    associated with this phy.
+ * @next_state: This parameter specifies the next state for the phy's starting
+ *    sub-state machine.
+ *
+ */
+static void scic_sds_phy_complete_link_training(
+	struct scic_sds_phy *sci_phy,
+	enum sas_linkrate max_link_rate,
+	u32 next_state)
+{
+	sci_phy->max_negotiated_speed = max_link_rate;
+
+	sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
+					    next_state);
+}
+
+static void scic_sds_phy_restart_starting_state(
+	struct scic_sds_phy *sci_phy)
+{
+	/* Stop the current substate machine */
+	sci_base_state_machine_stop(&sci_phy->starting_substate_machine);
+
+	/* Re-enter the base state machine starting state */
+	sci_base_state_machine_change_state(&sci_phy->state_machine,
+					    SCI_BASE_PHY_STATE_STARTING);
+}
+
+/* ****************************************************************************
+   * SCIC SDS PHY general handlers
+   ************************************************************************** */
+static enum sci_status scic_sds_phy_starting_substate_general_stop_handler(
+	struct scic_sds_phy *phy)
+{
+	sci_base_state_machine_stop(&phy->starting_substate_machine);
+
+	sci_base_state_machine_change_state(&phy->state_machine,
+						 SCI_BASE_PHY_STATE_STOPPED);
+
+	return SCI_SUCCESS;
+}
+
+/*
+ * *****************************************************************************
+ * * SCIC SDS PHY EVENT_HANDLERS
+ * ***************************************************************************** */
+
+/**
+ *
+ * @phy: This struct scic_sds_phy object which has received an event.
+ * @event_code: This is the event code which the phy object is to decode.
+ *
+ * This method is called when an event notification is received for the phy
+ * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. -
+ * decode the event - sas phy detected causes a state transition to the wait
+ * for speed event notification. - any other events log a warning message and
+ * set a failure status enum sci_status SCI_SUCCESS on any valid event notification
+ * SCI_FAILURE on any unexpected event notifation
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler(
+	struct scic_sds_phy *sci_phy,
+	u32 event_code)
+{
+	u32 result = SCI_SUCCESS;
+
+	switch (scu_get_event_code(event_code)) {
+	case SCU_EVENT_SAS_PHY_DETECTED:
+		scic_sds_phy_start_sas_link_training(sci_phy);
+		sci_phy->is_in_link_training = true;
+		break;
+
+	case SCU_EVENT_SATA_SPINUP_HOLD:
+		scic_sds_phy_start_sata_link_training(sci_phy);
+		sci_phy->is_in_link_training = true;
+		break;
+
+	default:
+		dev_dbg(sciphy_to_dev(sci_phy),
+			"%s: PHY starting substate machine received "
+			"unexpected event_code %x\n",
+			__func__,
+			event_code);
+
+		result = SCI_FAILURE;
+		break;
+	}
+
+	return result;
+}
+
+/**
+ *
+ * @phy: This struct scic_sds_phy object which has received an event.
+ * @event_code: This is the event code which the phy object is to decode.
+ *
+ * This method is called when an event notification is received for the phy
+ * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. -
+ * decode the event - sas phy detected returns us back to this state. - speed
+ * event detected causes a state transition to the wait for iaf. - identify
+ * timeout is an un-expected event and the state machine is restarted. - link
+ * failure events restart the starting state machine - any other events log a
+ * warning message and set a failure status enum sci_status SCI_SUCCESS on any valid
+ * event notification SCI_FAILURE on any unexpected event notifation
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler(
+	struct scic_sds_phy *sci_phy,
+	u32 event_code)
+{
+	u32 result = SCI_SUCCESS;
+
+	switch (scu_get_event_code(event_code)) {
+	case SCU_EVENT_SAS_PHY_DETECTED:
+		/*
+		 * Why is this being reported again by the controller?
+		 * We would re-enter this state so just stay here */
+		break;
+
+	case SCU_EVENT_SAS_15:
+	case SCU_EVENT_SAS_15_SSC:
+		scic_sds_phy_complete_link_training(
+			sci_phy,
+			SAS_LINK_RATE_1_5_GBPS,
+			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF);
+		break;
+
+	case SCU_EVENT_SAS_30:
+	case SCU_EVENT_SAS_30_SSC:
+		scic_sds_phy_complete_link_training(
+			sci_phy,
+			SAS_LINK_RATE_3_0_GBPS,
+			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF);
+		break;
+
+	case SCU_EVENT_SAS_60:
+	case SCU_EVENT_SAS_60_SSC:
+		scic_sds_phy_complete_link_training(
+			sci_phy,
+			SAS_LINK_RATE_6_0_GBPS,
+			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF);
+		break;
+
+	case SCU_EVENT_SATA_SPINUP_HOLD:
+		/*
+		 * We were doing SAS PHY link training and received a SATA PHY event
+		 * continue OOB/SN as if this were a SATA PHY */
+		scic_sds_phy_start_sata_link_training(sci_phy);
+		break;
+
+	case SCU_EVENT_LINK_FAILURE:
+		/* Link failure change state back to the starting state */
+		scic_sds_phy_restart_starting_state(sci_phy);
+		break;
+
+	default:
+		dev_warn(sciphy_to_dev(sci_phy),
+			 "%s: PHY starting substate machine received "
+			 "unexpected event_code %x\n",
+			 __func__,
+			 event_code);
+
+		result = SCI_FAILURE;
+		break;
+	}
+
+	return result;
+}
+
+/**
+ *
+ * @phy: This struct scic_sds_phy object which has received an event.
+ * @event_code: This is the event code which the phy object is to decode.
+ *
+ * This method is called when an event notification is received for the phy
+ * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. -
+ * decode the event - sas phy detected event backs up the state machine to the
+ * await speed notification. - identify timeout is an un-expected event and the
+ * state machine is restarted. - link failure events restart the starting state
+ * machine - any other events log a warning message and set a failure status
+ * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any
+ * unexpected event notifation
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler(
+	struct scic_sds_phy *sci_phy,
+	u32 event_code)
+{
+	u32 result = SCI_SUCCESS;
+
+	switch (scu_get_event_code(event_code)) {
+	case SCU_EVENT_SAS_PHY_DETECTED:
+		/* Backup the state machine */
+		scic_sds_phy_start_sas_link_training(sci_phy);
+		break;
+
+	case SCU_EVENT_SATA_SPINUP_HOLD:
+		/*
+		 * We were doing SAS PHY link training and received a SATA PHY event
+		 * continue OOB/SN as if this were a SATA PHY */
+		scic_sds_phy_start_sata_link_training(sci_phy);
+		break;
+
+	case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT:
+	case SCU_EVENT_LINK_FAILURE:
+	case SCU_EVENT_HARD_RESET_RECEIVED:
+		/* Start the oob/sn state machine over again */
+		scic_sds_phy_restart_starting_state(sci_phy);
+		break;
+
+	default:
+		dev_warn(sciphy_to_dev(sci_phy),
+			 "%s: PHY starting substate machine received "
+			 "unexpected event_code %x\n",
+			 __func__,
+			 event_code);
+
+		result = SCI_FAILURE;
+		break;
+	}
+
+	return result;
+}
+
+/**
+ *
+ * @phy: This struct scic_sds_phy object which has received an event.
+ * @event_code: This is the event code which the phy object is to decode.
+ *
+ * This method is called when an event notification is received for the phy
+ * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_POWER. -
+ * decode the event - link failure events restart the starting state machine -
+ * any other events log a warning message and set a failure status enum sci_status
+ * SCI_SUCCESS on a link failure event SCI_FAILURE on any unexpected event
+ * notifation
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_handler(
+	struct scic_sds_phy *sci_phy,
+	u32 event_code)
+{
+	u32 result = SCI_SUCCESS;
+
+	switch (scu_get_event_code(event_code)) {
+	case SCU_EVENT_LINK_FAILURE:
+		/* Link failure change state back to the starting state */
+		scic_sds_phy_restart_starting_state(sci_phy);
+		break;
+
+	default:
+		dev_warn(sciphy_to_dev(sci_phy),
+			"%s: PHY starting substate machine received unexpected "
+			"event_code %x\n",
+			__func__,
+			event_code);
+
+		result = SCI_FAILURE;
+		break;
+	}
+
+	return result;
+}
+
+/**
+ *
+ * @phy: This struct scic_sds_phy object which has received an event.
+ * @event_code: This is the event code which the phy object is to decode.
+ *
+ * This method is called when an event notification is received for the phy
+ * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. -
+ * decode the event - link failure events restart the starting state machine -
+ * sata spinup hold events are ignored since they are expected - any other
+ * events log a warning message and set a failure status enum sci_status SCI_SUCCESS
+ * on a link failure event SCI_FAILURE on any unexpected event notifation
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_handler(
+	struct scic_sds_phy *sci_phy,
+	u32 event_code)
+{
+	u32 result = SCI_SUCCESS;
+
+	switch (scu_get_event_code(event_code)) {
+	case SCU_EVENT_LINK_FAILURE:
+		/* Link failure change state back to the starting state */
+		scic_sds_phy_restart_starting_state(sci_phy);
+		break;
+
+	case SCU_EVENT_SATA_SPINUP_HOLD:
+		/* These events are received every 10ms and are expected while in this state */
+		break;
+
+	case SCU_EVENT_SAS_PHY_DETECTED:
+		/*
+		 * There has been a change in the phy type before OOB/SN for the
+		 * SATA finished start down the SAS link traning path. */
+		scic_sds_phy_start_sas_link_training(sci_phy);
+		break;
+
+	default:
+		dev_warn(sciphy_to_dev(sci_phy),
+			 "%s: PHY starting substate machine received "
+			 "unexpected event_code %x\n",
+			 __func__,
+			 event_code);
+
+		result = SCI_FAILURE;
+		break;
+	}
+
+	return result;
+}
+
+/**
+ * scic_sds_phy_starting_substate_await_sata_phy_event_handler -
+ * @phy: This struct scic_sds_phy object which has received an event.
+ * @event_code: This is the event code which the phy object is to decode.
+ *
+ * This method is called when an event notification is received for the phy
+ * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. -
+ * decode the event - link failure events restart the starting state machine -
+ * sata spinup hold events are ignored since they are expected - sata phy
+ * detected event change to the wait speed event - any other events log a
+ * warning message and set a failure status enum sci_status SCI_SUCCESS on a link
+ * failure event SCI_FAILURE on any unexpected event notifation
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handler(
+	struct scic_sds_phy *sci_phy, u32 event_code)
+{
+	u32 result = SCI_SUCCESS;
+
+	switch (scu_get_event_code(event_code)) {
+	case SCU_EVENT_LINK_FAILURE:
+		/* Link failure change state back to the starting state */
+		scic_sds_phy_restart_starting_state(sci_phy);
+		break;
+
+	case SCU_EVENT_SATA_SPINUP_HOLD:
+		/* These events might be received since we dont know how many may be in
+		 * the completion queue while waiting for power
+		 */
+		break;
+
+	case SCU_EVENT_SATA_PHY_DETECTED:
+		sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;
+
+		/* We have received the SATA PHY notification change state */
+		sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
+						    SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN);
+		break;
+
+	case SCU_EVENT_SAS_PHY_DETECTED:
+		/* There has been a change in the phy type before OOB/SN for the
+		 * SATA finished start down the SAS link traning path.
+		 */
+		scic_sds_phy_start_sas_link_training(sci_phy);
+		break;
+
+	default:
+		dev_warn(sciphy_to_dev(sci_phy),
+			 "%s: PHY starting substate machine received "
+			 "unexpected event_code %x\n",
+			 __func__,
+			 event_code);
+
+		result = SCI_FAILURE;
+		break;
+	}
+
+	return result;
+}
+
+/**
+ *
+ * @phy: This struct scic_sds_phy object which has received an event.
+ * @event_code: This is the event code which the phy object is to decode.
+ *
+ * This method is called when an event notification is received for the phy
+ * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN.
+ * - decode the event - sata phy detected returns us back to this state. -
+ * speed event detected causes a state transition to the wait for signature. -
+ * link failure events restart the starting state machine - any other events
+ * log a warning message and set a failure status enum sci_status SCI_SUCCESS on any
+ * valid event notification SCI_FAILURE on any unexpected event notifation
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_handler(
+	struct scic_sds_phy *sci_phy,
+	u32 event_code)
+{
+	u32 result = SCI_SUCCESS;
+
+	switch (scu_get_event_code(event_code)) {
+	case SCU_EVENT_SATA_PHY_DETECTED:
+		/*
+		 * The hardware reports multiple SATA PHY detected events
+		 * ignore the extras */
+		break;
+
+	case SCU_EVENT_SATA_15:
+	case SCU_EVENT_SATA_15_SSC:
+		scic_sds_phy_complete_link_training(
+			sci_phy,
+			SAS_LINK_RATE_1_5_GBPS,
+			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
+		break;
+
+	case SCU_EVENT_SATA_30:
+	case SCU_EVENT_SATA_30_SSC:
+		scic_sds_phy_complete_link_training(
+			sci_phy,
+			SAS_LINK_RATE_3_0_GBPS,
+			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
+		break;
+
+	case SCU_EVENT_SATA_60:
+	case SCU_EVENT_SATA_60_SSC:
+		scic_sds_phy_complete_link_training(
+			sci_phy,
+			SAS_LINK_RATE_6_0_GBPS,
+			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
+		break;
+
+	case SCU_EVENT_LINK_FAILURE:
+		/* Link failure change state back to the starting state */
+		scic_sds_phy_restart_starting_state(sci_phy);
+		break;
+
+	case SCU_EVENT_SAS_PHY_DETECTED:
+		/*
+		 * There has been a change in the phy type before OOB/SN for the
+		 * SATA finished start down the SAS link traning path. */
+		scic_sds_phy_start_sas_link_training(sci_phy);
+		break;
+
+	default:
+		dev_warn(sciphy_to_dev(sci_phy),
+			 "%s: PHY starting substate machine received "
+			 "unexpected event_code %x\n",
+			 __func__,
+			 event_code);
+
+		result = SCI_FAILURE;
+		break;
+	}
+
+	return result;
+}
+
+/**
+ * scic_sds_phy_starting_substate_await_sig_fis_event_handler -
+ * @phy: This struct scic_sds_phy object which has received an event.
+ * @event_code: This is the event code which the phy object is to decode.
+ *
+ * This method is called when an event notification is received for the phy
+ * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. -
+ * decode the event - sas phy detected event backs up the state machine to the
+ * await speed notification. - identify timeout is an un-expected event and the
+ * state machine is restarted. - link failure events restart the starting state
+ * machine - any other events log a warning message and set a failure status
+ * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any
+ * unexpected event notifation
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handler(
+	struct scic_sds_phy *sci_phy, u32 event_code)
+{
+	u32 result = SCI_SUCCESS;
+
+	switch (scu_get_event_code(event_code)) {
+	case SCU_EVENT_SATA_PHY_DETECTED:
+		/* Backup the state machine */
+		sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
+						    SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN);
+		break;
+
+	case SCU_EVENT_LINK_FAILURE:
+		/* Link failure change state back to the starting state */
+		scic_sds_phy_restart_starting_state(sci_phy);
+		break;
+
+	default:
+		dev_warn(sciphy_to_dev(sci_phy),
+			 "%s: PHY starting substate machine received "
+			 "unexpected event_code %x\n",
+			 __func__,
+			 event_code);
+
+		result = SCI_FAILURE;
+		break;
+	}
+
+	return result;
+}
+
+
+/*
+ * *****************************************************************************
+ * *  SCIC SDS PHY FRAME_HANDLERS
+ * ***************************************************************************** */
+
+/**
+ *
+ * @phy: This is struct scic_sds_phy object which is being requested to decode the
+ *    frame data.
+ * @frame_index: This is the index of the unsolicited frame which was received
+ *    for this phy.
+ *
+ * This method decodes the unsolicited frame when the struct scic_sds_phy is in the
+ * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Get the UF Header - If the UF
+ * is an IAF - Copy IAF data to local phy object IAF data buffer. - Change
+ * starting substate to wait power. - else - log warning message of unexpected
+ * unsolicted frame - release frame buffer enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler(
+	struct scic_sds_phy *sci_phy, u32 frame_index)
+{
+	enum sci_status result;
+	u32 *frame_words;
+	struct sas_identify_frame iaf;
+	struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
+
+	result = scic_sds_unsolicited_frame_control_get_header(
+		&(scic_sds_phy_get_controller(sci_phy)->uf_control),
+		frame_index,
+		(void **)&frame_words);
+
+	if (result != SCI_SUCCESS)
+		return result;
+
+	sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32));
+	if (iaf.frame_type == 0) {
+		u32 state;
+
+		memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf));
+		if (iaf.smp_tport) {
+			/* We got the IAF for an expander PHY go to the final
+			 * state since there are no power requirements for
+			 * expander phys.
+			 */
+			state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL;
+		} else {
+			/* We got the IAF we can now go to the await spinup
+			 * semaphore state
+			 */
+			state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER;
+		}
+		sci_base_state_machine_change_state(
+				&sci_phy->starting_substate_machine,
+				state);
+		result = SCI_SUCCESS;
+	} else
+		dev_warn(sciphy_to_dev(sci_phy),
+			"%s: PHY starting substate machine received "
+			"unexpected frame id %x\n",
+			__func__,
+			frame_index);
+
+	scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy),
+					  frame_index);
+
+	return result;
+}
+
+/**
+ *
+ * @phy: This is struct scic_sds_phy object which is being requested to decode the
+ *    frame data.
+ * @frame_index: This is the index of the unsolicited frame which was received
+ *    for this phy.
+ *
+ * This method decodes the unsolicited frame when the struct scic_sds_phy is in the
+ * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Get the UF Header - If
+ * the UF is an SIGNATURE FIS - Copy IAF data to local phy object SIGNATURE FIS
+ * data buffer. - else - log warning message of unexpected unsolicted frame -
+ * release frame buffer enum sci_status SCI_SUCCESS Must decode the SIGNATURE FIS
+ * data
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handler(
+	struct scic_sds_phy *sci_phy,
+	u32 frame_index)
+{
+	enum sci_status result;
+	struct dev_to_host_fis *frame_header;
+	u32 *fis_frame_data;
+	struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
+
+	result = scic_sds_unsolicited_frame_control_get_header(
+		&(scic_sds_phy_get_controller(sci_phy)->uf_control),
+		frame_index,
+		(void **)&frame_header);
+
+	if (result != SCI_SUCCESS)
+		return result;
+
+	if ((frame_header->fis_type == FIS_REGD2H) &&
+	    !(frame_header->status & ATA_BUSY)) {
+		scic_sds_unsolicited_frame_control_get_buffer(
+			&(scic_sds_phy_get_controller(sci_phy)->uf_control),
+			frame_index,
+			(void **)&fis_frame_data);
+
+		scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis,
+						       frame_header,
+						       fis_frame_data);
+
+		/* got IAF we can now go to the await spinup semaphore state */
+		sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
+						    SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
+
+		result = SCI_SUCCESS;
+	} else
+		dev_warn(sciphy_to_dev(sci_phy),
+			 "%s: PHY starting substate machine received "
+			 "unexpected frame id %x\n",
+			 __func__,
+			 frame_index);
+
+	/* Regardless of the result we are done with this frame with it */
+	scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy),
+					  frame_index);
+
+	return result;
+}
+
+/*
+ * *****************************************************************************
+ * * SCIC SDS PHY POWER_HANDLERS
+ * ***************************************************************************** */
+
+/*
+ * This method is called by the struct scic_sds_controller when the phy object is
+ * granted power. - The notify enable spinups are turned on for this phy object
+ * - The phy state machine is transitioned to the
+ * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler(
+	struct scic_sds_phy *sci_phy)
+{
+	u32 enable_spinup;
+
+	enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control);
+	enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE);
+	writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control);
+
+	/* Change state to the final state this substate machine has run to completion */
+	sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
+					    SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
+
+	return SCI_SUCCESS;
+}
+
+/*
+ * This method is called by the struct scic_sds_controller when the phy object is
+ * granted power. - The phy state machine is transitioned to the
+ * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler(
+	struct scic_sds_phy *sci_phy)
+{
+	u32 scu_sas_pcfg_value;
+
+	/* Release the spinup hold state and reset the OOB state machine */
+	scu_sas_pcfg_value =
+		readl(&sci_phy->link_layer_registers->phy_configuration);
+	scu_sas_pcfg_value &=
+		~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE));
+	scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+	writel(scu_sas_pcfg_value,
+		&sci_phy->link_layer_registers->phy_configuration);
+
+	/* Now restart the OOB operation */
+	scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+	scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
+	writel(scu_sas_pcfg_value,
+		&sci_phy->link_layer_registers->phy_configuration);
+
+	/* Change state to the final state this substate machine has run to completion */
+	sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
+					    SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);
+
+	return SCI_SUCCESS;
+}
+
+static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy,
+					   const char *func)
+{
+	dev_dbg(sciphy_to_dev(sci_phy),
+		 "%s: in wrong state: %d\n", func,
+		 sci_base_state_machine_get_state(&sci_phy->state_machine));
+	return SCI_FAILURE_INVALID_STATE;
+}
+
+static enum sci_status
+scic_sds_phy_default_start_handler(struct scic_sds_phy *sci_phy)
+{
+	return default_phy_handler(sci_phy, __func__);
+}
+
+static enum sci_status
+scic_sds_phy_default_stop_handler(struct scic_sds_phy *sci_phy)
+{
+	return default_phy_handler(sci_phy, __func__);
+}
+
+static enum sci_status
+scic_sds_phy_default_reset_handler(struct scic_sds_phy *sci_phy)
+{
+	return default_phy_handler(sci_phy, __func__);
+}
+
+static enum sci_status
+scic_sds_phy_default_destroy_handler(struct scic_sds_phy *sci_phy)
+{
+	return default_phy_handler(sci_phy, __func__);
+}
+
+static enum sci_status
+scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy,
+				   u32 frame_index)
+{
+	struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy);
+
+	default_phy_handler(sci_phy, __func__);
+	scic_sds_controller_release_frame(scic, frame_index);
+
+	return SCI_FAILURE_INVALID_STATE;
+}
+
+static enum sci_status
+scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy,
+				   u32 event_code)
+{
+	return default_phy_handler(sci_phy, __func__);
+}
+
+static enum sci_status
+scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy)
+{
+	return default_phy_handler(sci_phy, __func__);
+}
+
+
+
+static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = {
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = {
+		.start_handler		= scic_sds_phy_default_start_handler,
+		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
+		.reset_handler		= scic_sds_phy_default_reset_handler,
+		.destruct_handler	= scic_sds_phy_default_destroy_handler,
+		.frame_handler		= scic_sds_phy_default_frame_handler,
+		.event_handler		= scic_sds_phy_default_event_handler,
+		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = {
+		.start_handler		= scic_sds_phy_default_start_handler,
+		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
+		.reset_handler		= scic_sds_phy_default_reset_handler,
+		.destruct_handler	= scic_sds_phy_default_destroy_handler,
+		.frame_handler		= scic_sds_phy_default_frame_handler,
+		.event_handler		= scic_sds_phy_starting_substate_await_ossp_event_handler,
+		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = {
+		.start_handler		= scic_sds_phy_default_start_handler,
+		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
+		.reset_handler		= scic_sds_phy_default_reset_handler,
+		.destruct_handler	= scic_sds_phy_default_destroy_handler,
+		.frame_handler		= scic_sds_phy_default_frame_handler,
+		.event_handler		= scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler,
+		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = {
+		.start_handler		= scic_sds_phy_default_start_handler,
+		.stop_handler		= scic_sds_phy_default_stop_handler,
+		.reset_handler		= scic_sds_phy_default_reset_handler,
+		.destruct_handler	= scic_sds_phy_default_destroy_handler,
+		.frame_handler		= scic_sds_phy_starting_substate_await_iaf_uf_frame_handler,
+		.event_handler		= scic_sds_phy_starting_substate_await_iaf_uf_event_handler,
+		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = {
+		.start_handler		= scic_sds_phy_default_start_handler,
+		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
+		.reset_handler		= scic_sds_phy_default_reset_handler,
+		.destruct_handler	= scic_sds_phy_default_destroy_handler,
+		.frame_handler		= scic_sds_phy_default_frame_handler,
+		.event_handler		= scic_sds_phy_starting_substate_await_sas_power_event_handler,
+		.consume_power_handler	= scic_sds_phy_starting_substate_await_sas_power_consume_power_handler
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = {
+		.start_handler		= scic_sds_phy_default_start_handler,
+		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
+		.reset_handler		= scic_sds_phy_default_reset_handler,
+		.destruct_handler	= scic_sds_phy_default_destroy_handler,
+		.frame_handler		= scic_sds_phy_default_frame_handler,
+		.event_handler		= scic_sds_phy_starting_substate_await_sata_power_event_handler,
+		.consume_power_handler	= scic_sds_phy_starting_substate_await_sata_power_consume_power_handler
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = {
+		.start_handler		= scic_sds_phy_default_start_handler,
+		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
+		.reset_handler		= scic_sds_phy_default_reset_handler,
+		.destruct_handler	= scic_sds_phy_default_destroy_handler,
+		.frame_handler		= scic_sds_phy_default_frame_handler,
+		.event_handler		= scic_sds_phy_starting_substate_await_sata_phy_event_handler,
+		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = {
+		.start_handler		= scic_sds_phy_default_start_handler,
+		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
+		.reset_handler		= scic_sds_phy_default_reset_handler,
+		.destruct_handler	= scic_sds_phy_default_destroy_handler,
+		.frame_handler		= scic_sds_phy_default_frame_handler,
+		.event_handler		= scic_sds_phy_starting_substate_await_sata_speed_event_handler,
+		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = {
+		.start_handler		= scic_sds_phy_default_start_handler,
+		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
+		.reset_handler		= scic_sds_phy_default_reset_handler,
+		.destruct_handler	= scic_sds_phy_default_destroy_handler,
+		.frame_handler		= scic_sds_phy_starting_substate_await_sig_fis_frame_handler,
+		.event_handler		= scic_sds_phy_starting_substate_await_sig_fis_event_handler,
+		.consume_power_handler	= scic_sds_phy_default_consume_power_handler
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = {
+		.start_handler		= scic_sds_phy_default_start_handler,
+		.stop_handler		= scic_sds_phy_starting_substate_general_stop_handler,
+		.reset_handler		= scic_sds_phy_default_reset_handler,
+		.destruct_handler	= scic_sds_phy_default_destroy_handler,
+		.frame_handler		 = scic_sds_phy_default_frame_handler,
+		.event_handler		 = scic_sds_phy_default_event_handler,
+		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
+	}
+};
+
+/**
+ * scic_sds_phy_set_starting_substate_handlers() -
+ *
+ * This macro sets the starting substate handlers by state_id
+ */
+#define scic_sds_phy_set_starting_substate_handlers(phy, state_id) \
+	scic_sds_phy_set_state_handlers(\
+		(phy), \
+		&scic_sds_phy_starting_substate_handler_table[(state_id)] \
+		)
+
+/*
+ * ****************************************************************************
+ * *  PHY STARTING SUBSTATE METHODS
+ * **************************************************************************** */
+
+/**
+ * scic_sds_phy_starting_initial_substate_enter -
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state
+ * handlers are put in place for the struct scic_sds_phy object. - The state is
+ * changed to the wait phy type event notification. none
+ */
+static void scic_sds_phy_starting_initial_substate_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_starting_substate_handlers(
+		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL);
+
+	/* This is just an temporary state go off to the starting state */
+	sci_base_state_machine_change_state(&sci_phy->starting_substate_machine,
+					    SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the
+ * struct scic_sds_phy object state handlers for this state. none
+ */
+static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_starting_substate_handlers(
+		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN
+		);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the
+ * struct scic_sds_phy object state handlers for this state. none
+ */
+static void scic_sds_phy_starting_await_sas_speed_en_substate_enter(
+		void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_starting_substate_handlers(
+		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN
+		);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the
+ * struct scic_sds_phy object state handlers for this state. none
+ */
+static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_starting_substate_handlers(
+		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF
+		);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the
+ * struct scic_sds_phy object state handlers for this state. - Add this phy object to
+ * the power control queue none
+ */
+static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_starting_substate_handlers(
+		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER
+		);
+
+	scic_sds_controller_power_control_queue_insert(
+		scic_sds_phy_get_controller(sci_phy),
+		sci_phy
+		);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on exiting
+ * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the
+ * struct scic_sds_phy object from the power control queue. none
+ */
+static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_controller_power_control_queue_remove(
+		scic_sds_phy_get_controller(sci_phy), sci_phy
+		);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the
+ * struct scic_sds_phy object state handlers for this state. - Add this phy object to
+ * the power control queue none
+ */
+static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_starting_substate_handlers(
+		sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER
+		);
+
+	scic_sds_controller_power_control_queue_insert(
+		scic_sds_phy_get_controller(sci_phy),
+		sci_phy
+		);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on exiting
+ * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the
+ * struct scic_sds_phy object from the power control queue. none
+ */
+static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_controller_power_control_queue_remove(
+		scic_sds_phy_get_controller(sci_phy),
+		sci_phy
+		);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This function will perform the actions required by the struct scic_sds_phy on
+ * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the
+ * struct scic_sds_phy object state handlers for this state. none
+ */
+static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_starting_substate_handlers(
+			sci_phy,
+			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);
+
+	isci_timer_start(sci_phy->sata_timeout_timer,
+			 SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy
+ * on exiting
+ * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer
+ * that was started on entry to await sata phy event notification none
+ */
+static inline void scic_sds_phy_starting_await_sata_phy_substate_exit(
+		void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	isci_timer_stop(sci_phy->sata_timeout_timer);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the
+ * struct scic_sds_phy object state handlers for this state. none
+ */
+static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_starting_substate_handlers(
+			sci_phy,
+			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN);
+
+	isci_timer_start(sci_phy->sata_timeout_timer,
+			 SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This function will perform the actions required by the
+ * struct scic_sds_phy on exiting
+ * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer
+ * that was started on entry to await sata phy event notification none
+ */
+static inline void scic_sds_phy_starting_await_sata_speed_substate_exit(
+	void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	isci_timer_stop(sci_phy->sata_timeout_timer);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This function will perform the actions required by the struct scic_sds_phy on
+ * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the
+ * struct scic_sds_phy object state handlers for this state.
+ * - Start the SIGNATURE FIS
+ * timeout timer none
+ */
+static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object)
+{
+	bool continue_to_ready_state;
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_starting_substate_handlers(
+			sci_phy,
+			SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
+
+	continue_to_ready_state = scic_sds_port_link_detected(
+		sci_phy->owning_port,
+		sci_phy);
+
+	if (continue_to_ready_state) {
+		/*
+		 * Clear the PE suspend condition so we can actually
+		 * receive SIG FIS
+		 * The hardware will not respond to the XRDY until the PE
+		 * suspend condition is cleared.
+		 */
+		scic_sds_phy_resume(sci_phy);
+
+		isci_timer_start(sci_phy->sata_timeout_timer,
+				 SCIC_SDS_SIGNATURE_FIS_TIMEOUT);
+	} else
+		sci_phy->is_in_link_training = false;
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This function will perform the actions required by the
+ * struct scic_sds_phy on exiting
+ * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE
+ * FIS timeout timer. none
+ */
+static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(
+	void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	isci_timer_stop(sci_phy->sata_timeout_timer);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy
+ * object state handlers for this state. - Change base state machine to the
+ * ready state. none
+ */
+static void scic_sds_phy_starting_final_substate_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_starting_substate_handlers(sci_phy,
+						    SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
+
+	/* State machine has run to completion so exit out and change
+	 * the base state machine to the ready state
+	 */
+	sci_base_state_machine_change_state(&sci_phy->state_machine,
+					    SCI_BASE_PHY_STATE_READY);
+}
+
+/* --------------------------------------------------------------------------- */
+
+static const struct sci_base_state scic_sds_phy_starting_substates[] = {
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = {
+		.enter_state = scic_sds_phy_starting_initial_substate_enter,
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = {
+		.enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter,
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = {
+		.enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter,
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = {
+		.enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter,
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = {
+		.enter_state = scic_sds_phy_starting_await_sas_power_substate_enter,
+		.exit_state  = scic_sds_phy_starting_await_sas_power_substate_exit,
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = {
+		.enter_state = scic_sds_phy_starting_await_sata_power_substate_enter,
+		.exit_state  = scic_sds_phy_starting_await_sata_power_substate_exit
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = {
+		.enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter,
+		.exit_state  = scic_sds_phy_starting_await_sata_phy_substate_exit
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = {
+		.enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter,
+		.exit_state  = scic_sds_phy_starting_await_sata_speed_substate_exit
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = {
+		.enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter,
+		.exit_state  = scic_sds_phy_starting_await_sig_fis_uf_substate_exit
+	},
+	[SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = {
+		.enter_state = scic_sds_phy_starting_final_substate_enter,
+	}
+};
+
+/*
+ * This method takes the struct scic_sds_phy from a stopped state and
+ * attempts to start it. - The phy state machine is transitioned to the
+ * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS
+ */
+static enum sci_status
+scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy)
+{
+	struct isci_host *ihost;
+	struct scic_sds_controller *scic;
+
+	scic = scic_sds_phy_get_controller(sci_phy),
+	ihost = scic_to_ihost(scic);
+
+	/* Create the SIGNATURE FIS Timeout timer for this phy */
+	sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy,
+							scic_sds_phy_sata_timeout);
+
+	if (sci_phy->sata_timeout_timer)
+		sci_base_state_machine_change_state(&sci_phy->state_machine,
+						    SCI_BASE_PHY_STATE_STARTING);
+
+	return SCI_SUCCESS;
+}
+
+static enum sci_status
+scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy)
+{
+	return SCI_SUCCESS;
+}
+
+static enum sci_status
+scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy)
+{
+	sci_base_state_machine_change_state(&sci_phy->state_machine,
+					    SCI_BASE_PHY_STATE_STOPPED);
+
+	return SCI_SUCCESS;
+}
+
+static enum sci_status
+scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy)
+{
+	sci_base_state_machine_change_state(&sci_phy->state_machine,
+					    SCI_BASE_PHY_STATE_RESETTING);
+
+	return SCI_SUCCESS;
+}
+
+/**
+ * scic_sds_phy_ready_state_event_handler -
+ * @phy: This is the struct scic_sds_phy object which has received the event.
+ *
+ * This method request the struct scic_sds_phy handle the received event.  The only
+ * event that we are interested in while in the ready state is the link failure
+ * event. - decoded event is a link failure - transition the struct scic_sds_phy back
+ * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will
+ * report a warning message enum sci_status SCI_SUCCESS if the event received is a
+ * link failure SCI_FAILURE_INVALID_STATE for any other event received.
+ */
+static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy,
+							      u32 event_code)
+{
+	enum sci_status result = SCI_FAILURE;
+
+	switch (scu_get_event_code(event_code)) {
+	case SCU_EVENT_LINK_FAILURE:
+		/* Link failure change state back to the starting state */
+		sci_base_state_machine_change_state(&sci_phy->state_machine,
+						    SCI_BASE_PHY_STATE_STARTING);
+		result = SCI_SUCCESS;
+		break;
+
+	case SCU_EVENT_BROADCAST_CHANGE:
+		/* Broadcast change received. Notify the port. */
+		if (scic_sds_phy_get_port(sci_phy) != NULL)
+			scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy);
+		else
+			sci_phy->bcn_received_while_port_unassigned = true;
+		break;
+
+	default:
+		dev_warn(sciphy_to_dev(sci_phy),
+			 "%sP SCIC PHY 0x%p ready state machine received "
+			 "unexpected event_code %x\n",
+			 __func__, sci_phy, event_code);
+
+		result = SCI_FAILURE_INVALID_STATE;
+		break;
+	}
+
+	return result;
+}
+
+static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy,
+								  u32 event_code)
+{
+	enum sci_status result = SCI_FAILURE;
+
+	switch (scu_get_event_code(event_code)) {
+	case SCU_EVENT_HARD_RESET_TRANSMITTED:
+		/* Link failure change state back to the starting state */
+		sci_base_state_machine_change_state(&sci_phy->state_machine,
+						    SCI_BASE_PHY_STATE_STARTING);
+		result = SCI_SUCCESS;
+		break;
+
+	default:
+		dev_warn(sciphy_to_dev(sci_phy),
+			 "%s: SCIC PHY 0x%p resetting state machine received "
+			 "unexpected event_code %x\n",
+			 __func__, sci_phy, event_code);
+
+		result = SCI_FAILURE_INVALID_STATE;
+		break;
+	}
+
+	return result;
+}
+
+/* --------------------------------------------------------------------------- */
+
+static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = {
+	[SCI_BASE_PHY_STATE_INITIAL] = {
+		.start_handler = scic_sds_phy_default_start_handler,
+		.stop_handler  = scic_sds_phy_default_stop_handler,
+		.reset_handler = scic_sds_phy_default_reset_handler,
+		.destruct_handler = scic_sds_phy_default_destroy_handler,
+		.frame_handler		 = scic_sds_phy_default_frame_handler,
+		.event_handler		 = scic_sds_phy_default_event_handler,
+		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
+	},
+	[SCI_BASE_PHY_STATE_STOPPED]  = {
+		.start_handler = scic_sds_phy_stopped_state_start_handler,
+		.stop_handler  = scic_sds_phy_default_stop_handler,
+		.reset_handler = scic_sds_phy_default_reset_handler,
+		.destruct_handler = scic_sds_phy_stopped_state_destroy_handler,
+		.frame_handler		 = scic_sds_phy_default_frame_handler,
+		.event_handler		 = scic_sds_phy_default_event_handler,
+		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
+	},
+	[SCI_BASE_PHY_STATE_STARTING] = {
+		.start_handler = scic_sds_phy_default_start_handler,
+		.stop_handler  = scic_sds_phy_default_stop_handler,
+		.reset_handler = scic_sds_phy_default_reset_handler,
+		.destruct_handler = scic_sds_phy_default_destroy_handler,
+		.frame_handler		 = scic_sds_phy_default_frame_handler,
+		.event_handler		 = scic_sds_phy_default_event_handler,
+		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
+	},
+	[SCI_BASE_PHY_STATE_READY] = {
+		.start_handler = scic_sds_phy_default_start_handler,
+		.stop_handler  = scic_sds_phy_ready_state_stop_handler,
+		.reset_handler = scic_sds_phy_ready_state_reset_handler,
+		.destruct_handler = scic_sds_phy_default_destroy_handler,
+		.frame_handler		 = scic_sds_phy_default_frame_handler,
+		.event_handler		 = scic_sds_phy_ready_state_event_handler,
+		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
+	},
+	[SCI_BASE_PHY_STATE_RESETTING] = {
+		.start_handler = scic_sds_phy_default_start_handler,
+		.stop_handler  = scic_sds_phy_default_stop_handler,
+		.reset_handler = scic_sds_phy_default_reset_handler,
+		.destruct_handler = scic_sds_phy_default_destroy_handler,
+		.frame_handler		 = scic_sds_phy_default_frame_handler,
+		.event_handler		 = scic_sds_phy_resetting_state_event_handler,
+		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
+	},
+	[SCI_BASE_PHY_STATE_FINAL] = {
+		.start_handler = scic_sds_phy_default_start_handler,
+		.stop_handler  = scic_sds_phy_default_stop_handler,
+		.reset_handler = scic_sds_phy_default_reset_handler,
+		.destruct_handler = scic_sds_phy_default_destroy_handler,
+		.frame_handler		 = scic_sds_phy_default_frame_handler,
+		.event_handler		 = scic_sds_phy_default_event_handler,
+		.consume_power_handler	 = scic_sds_phy_default_consume_power_handler
+	}
+};
+
+/*
+ * ****************************************************************************
+ * *  PHY STATE PRIVATE METHODS
+ * **************************************************************************** */
+
+/**
+ *
+ * @sci_phy: This is the struct scic_sds_phy object to stop.
+ *
+ * This method will stop the struct scic_sds_phy object. This does not reset the
+ * protocol engine it just suspends it and places it in a state where it will
+ * not cause the end device to power up. none
+ */
+static void scu_link_layer_stop_protocol_engine(
+	struct scic_sds_phy *sci_phy)
+{
+	u32 scu_sas_pcfg_value;
+	u32 enable_spinup_value;
+
+	/* Suspend the protocol engine and place it in a sata spinup hold state */
+	scu_sas_pcfg_value =
+		readl(&sci_phy->link_layer_registers->phy_configuration);
+	scu_sas_pcfg_value |=
+		(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
+		 SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) |
+		 SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD));
+	writel(scu_sas_pcfg_value,
+	       &sci_phy->link_layer_registers->phy_configuration);
+
+	/* Disable the notify enable spinup primitives */
+	enable_spinup_value = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control);
+	enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE);
+	writel(enable_spinup_value, &sci_phy->link_layer_registers->notify_enable_spinup_control);
+}
+
+/**
+ *
+ *
+ * This method will start the OOB/SN state machine for this struct scic_sds_phy object.
+ */
+static void scu_link_layer_start_oob(
+	struct scic_sds_phy *sci_phy)
+{
+	u32 scu_sas_pcfg_value;
+
+	scu_sas_pcfg_value =
+		readl(&sci_phy->link_layer_registers->phy_configuration);
+	scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
+	scu_sas_pcfg_value &=
+		~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
+		SCU_SAS_PCFG_GEN_BIT(HARD_RESET));
+	writel(scu_sas_pcfg_value,
+	       &sci_phy->link_layer_registers->phy_configuration);
+}
+
+/**
+ *
+ *
+ * This method will transmit a hard reset request on the specified phy. The SCU
+ * hardware requires that we reset the OOB state machine and set the hard reset
+ * bit in the phy configuration register. We then must start OOB over with the
+ * hard reset bit set.
+ */
+static void scu_link_layer_tx_hard_reset(
+	struct scic_sds_phy *sci_phy)
+{
+	u32 phy_configuration_value;
+
+	/*
+	 * SAS Phys must wait for the HARD_RESET_TX event notification to transition
+	 * to the starting state. */
+	phy_configuration_value =
+		readl(&sci_phy->link_layer_registers->phy_configuration);
+	phy_configuration_value |=
+		(SCU_SAS_PCFG_GEN_BIT(HARD_RESET) |
+		 SCU_SAS_PCFG_GEN_BIT(OOB_RESET));
+	writel(phy_configuration_value,
+	       &sci_phy->link_layer_registers->phy_configuration);
+
+	/* Now take the OOB state machine out of reset */
+	phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
+	phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+	writel(phy_configuration_value,
+	       &sci_phy->link_layer_registers->phy_configuration);
+}
+
+/*
+ * ****************************************************************************
+ * *  PHY BASE STATE METHODS
+ * **************************************************************************** */
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state
+ * handlers for the phy object base state machine initial state. none
+ */
+static void scic_sds_phy_initial_state_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This function will perform the actions required by the struct scic_sds_phy on
+ * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state
+ * handlers for the phy object base state machine initial state. - The SCU
+ * hardware is requested to stop the protocol engine. none
+ */
+static void scic_sds_phy_stopped_state_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+	struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy);
+	struct isci_host *ihost = scic_to_ihost(scic);
+
+	/*
+	 * @todo We need to get to the controller to place this PE in a
+	 * reset state
+	 */
+
+	scic_sds_phy_set_base_state_handlers(sci_phy,
+					     SCI_BASE_PHY_STATE_STOPPED);
+
+	if (sci_phy->sata_timeout_timer != NULL) {
+		isci_del_timer(ihost, sci_phy->sata_timeout_timer);
+
+		sci_phy->sata_timeout_timer = NULL;
+	}
+
+	scu_link_layer_stop_protocol_engine(sci_phy);
+
+	if (sci_phy->state_machine.previous_state_id !=
+			SCI_BASE_PHY_STATE_INITIAL)
+		scic_sds_controller_link_down(
+				scic_sds_phy_get_controller(sci_phy),
+				scic_sds_phy_get_port(sci_phy),
+				sci_phy);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state
+ * handlers for the phy object base state machine starting state. - The SCU
+ * hardware is requested to start OOB/SN on this protocl engine. - The phy
+ * starting substate machine is started. - If the previous state was the ready
+ * state then the struct scic_sds_controller is informed that the phy has gone link
+ * down. none
+ */
+static void scic_sds_phy_starting_state_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING);
+
+	scu_link_layer_stop_protocol_engine(sci_phy);
+	scu_link_layer_start_oob(sci_phy);
+
+	/* We don't know what kind of phy we are going to be just yet */
+	sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
+	sci_phy->bcn_received_while_port_unassigned = false;
+
+	/* Change over to the starting substate machine to continue */
+	sci_base_state_machine_start(&sci_phy->starting_substate_machine);
+
+	if (sci_phy->state_machine.previous_state_id
+	    == SCI_BASE_PHY_STATE_READY) {
+		scic_sds_controller_link_down(
+			scic_sds_phy_get_controller(sci_phy),
+			scic_sds_phy_get_port(sci_phy),
+			sci_phy
+			);
+	}
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state
+ * handlers for the phy object base state machine ready state. - The SCU
+ * hardware protocol engine is resumed. - The struct scic_sds_controller is informed
+ * that the phy object has gone link up. none
+ */
+static void scic_sds_phy_ready_state_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY);
+
+	scic_sds_controller_link_up(
+		scic_sds_phy_get_controller(sci_phy),
+		scic_sds_phy_get_port(sci_phy),
+		sci_phy
+		);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on exiting
+ * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware
+ * protocol engine represented by this struct scic_sds_phy object. none
+ */
+static void scic_sds_phy_ready_state_exit(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_suspend(sci_phy);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state
+ * handlers for the phy object base state machine resetting state. none
+ */
+static void scic_sds_phy_resetting_state_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING);
+
+	/*
+	 * The phy is being reset, therefore deactivate it from the port.
+	 * In the resetting state we don't notify the user regarding
+	 * link up and link down notifications. */
+	scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false);
+
+	if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
+		scu_link_layer_tx_hard_reset(sci_phy);
+	} else {
+		/*
+		 * The SCU does not need to have a discrete reset state so
+		 * just go back to the starting state.
+		 */
+		sci_base_state_machine_change_state(
+				&sci_phy->state_machine,
+				SCI_BASE_PHY_STATE_STARTING);
+	}
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_phy object.
+ *
+ * This method will perform the actions required by the struct scic_sds_phy on
+ * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state
+ * handlers for the phy object base state machine final state. none
+ */
+static void scic_sds_phy_final_state_enter(void *object)
+{
+	struct scic_sds_phy *sci_phy = object;
+
+	scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL);
+
+	/* Nothing to do here */
+}
+
+/* --------------------------------------------------------------------------- */
+
+static const struct sci_base_state scic_sds_phy_state_table[] = {
+	[SCI_BASE_PHY_STATE_INITIAL] = {
+		.enter_state = scic_sds_phy_initial_state_enter,
+	},
+	[SCI_BASE_PHY_STATE_STOPPED] = {
+		.enter_state = scic_sds_phy_stopped_state_enter,
+	},
+	[SCI_BASE_PHY_STATE_STARTING] = {
+		.enter_state = scic_sds_phy_starting_state_enter,
+	},
+	[SCI_BASE_PHY_STATE_READY] = {
+		.enter_state = scic_sds_phy_ready_state_enter,
+		.exit_state = scic_sds_phy_ready_state_exit,
+	},
+	[SCI_BASE_PHY_STATE_RESETTING] = {
+		.enter_state = scic_sds_phy_resetting_state_enter,
+	},
+	[SCI_BASE_PHY_STATE_FINAL] = {
+		.enter_state = scic_sds_phy_final_state_enter,
+	},
+};
+
+void scic_sds_phy_construct(struct scic_sds_phy *sci_phy,
+			    struct scic_sds_port *owning_port, u8 phy_index)
+{
+	sci_base_state_machine_construct(&sci_phy->state_machine,
+					 sci_phy,
+					 scic_sds_phy_state_table,
+					 SCI_BASE_PHY_STATE_INITIAL);
+
+	sci_base_state_machine_start(&sci_phy->state_machine);
+
+	/* Copy the rest of the input data to our locals */
+	sci_phy->owning_port = owning_port;
+	sci_phy->phy_index = phy_index;
+	sci_phy->bcn_received_while_port_unassigned = false;
+	sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
+	sci_phy->link_layer_registers = NULL;
+	sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
+	sci_phy->sata_timeout_timer = NULL;
+
+	/* Initialize the the substate machines */
+	sci_base_state_machine_construct(&sci_phy->starting_substate_machine,
+					 sci_phy,
+					 scic_sds_phy_starting_substates,
+					 SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL);
+}
 
 void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index)
 {
diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h
index 3a95adbb508c..093fd473366c 100644
--- a/drivers/scsi/isci/phy.h
+++ b/drivers/scsi/isci/phy.h
@@ -57,7 +57,105 @@
 
 #include <scsi/sas.h>
 #include <scsi/libsas.h>
-#include "scic_sds_phy.h"
+#include "state_machine.h"
+
+/* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS
+ * before restarting the starting state machine.  Technically, the old parallel
+ * ATA specification required up to 30 seconds for a device to issue its
+ * signature FIS as a result of a soft reset.  Now we see that devices respond
+ * generally within 15 seconds, but we'll use 25 for now.
+ */
+#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT    25000
+
+/* This is the timeout for the SATA OOB/SN because the hardware does not
+ * recognize a hot plug after OOB signal but before the SN signals.  We need to
+ * make sure after a hotplug timeout if we have not received the speed event
+ * notification from the hardware that we restart the hardware OOB state
+ * machine.
+ */
+#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT  250
+
+enum scic_sds_phy_protocol {
+	SCIC_SDS_PHY_PROTOCOL_UNKNOWN,
+	SCIC_SDS_PHY_PROTOCOL_SAS,
+	SCIC_SDS_PHY_PROTOCOL_SATA,
+	SCIC_SDS_MAX_PHY_PROTOCOLS
+};
+
+/**
+ * struct scic_sds_phy - This structure  contains or references all of the data
+ *    necessary to represent the core phy object and SCU harware protocol
+ *    engine.
+ *
+ *
+ */
+struct scic_sds_phy {
+	/**
+	 * This field contains the information for the base phy state machine.
+	 */
+	struct sci_base_state_machine state_machine;
+
+	/**
+	 * This field specifies the port object that owns/contains this phy.
+	 */
+	struct scic_sds_port *owning_port;
+
+	/**
+	 * This field indicates whether the phy supports 1.5 Gb/s, 3.0 Gb/s,
+	 * or 6.0 Gb/s operation.
+	 */
+	enum sas_linkrate max_negotiated_speed;
+
+	/**
+	 * This member specifies the protocol being utilized on this phy.  This
+	 * field contains a legitamite value once the PHY has link trained with
+	 * a remote phy.
+	 */
+	enum scic_sds_phy_protocol protocol;
+
+	/**
+	 * This field specifies the index with which this phy is associated (0-3).
+	 */
+	u8 phy_index;
+
+	/**
+	 * This member indicates if this particular PHY has received a BCN while
+	 * it had no port assignement.  This BCN will be reported once the phy is
+	 * assigned to a port.
+	 */
+	bool bcn_received_while_port_unassigned;
+
+	/**
+	 * This field indicates if this PHY is currently in the process of
+	 * link training (i.e. it has started OOB, but has yet to perform
+	 * IAF exchange/Signature FIS reception).
+	 */
+	bool is_in_link_training;
+
+	/**
+	 * This field contains a reference to the timer utilized in detecting
+	 * when a signature FIS timeout has occurred.  The signature FIS is the
+	 * first FIS sent by an attached SATA device after OOB/SN.
+	 */
+	void *sata_timeout_timer;
+
+	const struct scic_sds_phy_state_handler *state_handlers;
+
+	struct sci_base_state_machine starting_substate_machine;
+
+	/**
+	 * This field is the pointer to the transport layer register for the SCU
+	 * hardware.
+	 */
+	struct scu_transport_layer_registers __iomem *transport_layer_registers;
+
+	/**
+	 * This field points to the link layer register set within the SCU.
+	 */
+	struct scu_link_layer_registers __iomem *link_layer_registers;
+
+};
+
 
 struct isci_phy {
 	struct scic_sds_phy sci;
@@ -85,6 +183,480 @@ static inline struct isci_phy *sci_phy_to_iphy(struct scic_sds_phy *sci_phy)
 	return iphy;
 }
 
+struct scic_phy_cap {
+	union {
+		struct {
+			/*
+			 * The SAS specification indicates the start bit shall
+			 * always be set to
+			 * 1.  This implementation will have the start bit set
+			 * to 0 if the PHY CAPABILITIES were either not
+			 * received or speed negotiation failed.
+			 */
+			u8 start:1;
+			u8 tx_ssc_type:1;
+			u8 res1:2;
+			u8 req_logical_linkrate:4;
+
+			u32 gen1_no_ssc:1;
+			u32 gen1_ssc:1;
+			u32 gen2_no_ssc:1;
+			u32 gen2_ssc:1;
+			u32 gen3_no_ssc:1;
+			u32 gen3_ssc:1;
+			u32 res2:17;
+			u32 parity:1;
+		};
+		u32 all;
+	};
+}  __packed;
+
+/* this data structure reflects the link layer transmit identification reg */
+struct scic_phy_proto {
+	union {
+		struct {
+			u16 _r_a:1;
+			u16 smp_iport:1;
+			u16 stp_iport:1;
+			u16 ssp_iport:1;
+			u16 _r_b:4;
+			u16 _r_c:1;
+			u16 smp_tport:1;
+			u16 stp_tport:1;
+			u16 ssp_tport:1;
+			u16 _r_d:4;
+		};
+		u16 all;
+	};
+} __packed;
+
+
+/**
+ * struct scic_phy_properties - This structure defines the properties common to
+ *    all phys that can be retrieved.
+ *
+ *
+ */
+struct scic_phy_properties {
+	/**
+	 * This field specifies the port that currently contains the
+	 * supplied phy.  This field may be set to NULL
+	 * if the phy is not currently contained in a port.
+	 */
+	struct scic_sds_port *owning_port;
+
+	/**
+	 * This field specifies the link rate at which the phy is
+	 * currently operating.
+	 */
+	enum sas_linkrate negotiated_link_rate;
+
+	/**
+	 * This field specifies the index of the phy in relation to other
+	 * phys within the controller.  This index is zero relative.
+	 */
+	u8 index;
+};
+
+/**
+ * struct scic_sas_phy_properties - This structure defines the properties,
+ *    specific to a SAS phy, that can be retrieved.
+ *
+ *
+ */
+struct scic_sas_phy_properties {
+	/**
+	 * This field delineates the Identify Address Frame received
+	 * from the remote end point.
+	 */
+	struct sas_identify_frame rcvd_iaf;
+
+	/**
+	 * This field delineates the Phy capabilities structure received
+	 * from the remote end point.
+	 */
+	struct scic_phy_cap rcvd_cap;
+
+};
+
+/**
+ * struct scic_sata_phy_properties - This structure defines the properties,
+ *    specific to a SATA phy, that can be retrieved.
+ *
+ *
+ */
+struct scic_sata_phy_properties {
+	/**
+	 * This field delineates the signature FIS received from the
+	 * attached target.
+	 */
+	struct dev_to_host_fis signature_fis;
+
+	/**
+	 * This field specifies to the user if a port selector is connected
+	 * on the specified phy.
+	 */
+	bool is_port_selector_present;
+
+};
+
+/**
+ * enum scic_phy_counter_id - This enumeration depicts the various pieces of
+ *    optional information that can be retrieved for a specific phy.
+ *
+ *
+ */
+enum scic_phy_counter_id {
+	/**
+	 * This PHY information field tracks the number of frames received.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_FRAME,
+
+	/**
+	 * This PHY information field tracks the number of frames transmitted.
+	 */
+	SCIC_PHY_COUNTER_TRANSMITTED_FRAME,
+
+	/**
+	 * This PHY information field tracks the number of DWORDs received.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD,
+
+	/**
+	 * This PHY information field tracks the number of DWORDs transmitted.
+	 */
+	SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD,
+
+	/**
+	 * This PHY information field tracks the number of times DWORD
+	 * synchronization was lost.
+	 */
+	SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR,
+
+	/**
+	 * This PHY information field tracks the number of received DWORDs with
+	 * running disparity errors.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR,
+
+	/**
+	 * This PHY information field tracks the number of received frames with a
+	 * CRC error (not including short or truncated frames).
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR,
+
+	/**
+	 * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
+	 * primitives received.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT,
+
+	/**
+	 * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
+	 * primitives transmitted.
+	 */
+	SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT,
+
+	/**
+	 * This PHY information field tracks the number of times the inactivity
+	 * timer for connections on the phy has been utilized.
+	 */
+	SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED,
+
+	/**
+	 * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
+	 * primitives received.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT,
+
+	/**
+	 * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
+	 * primitives transmitted.
+	 */
+	SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT,
+
+	/**
+	 * This PHY information field tracks the number of CREDIT BLOCKED
+	 * primitives received.
+	 * @note Depending on remote device implementation, credit blocks
+	 *       may occur regularly.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED,
+
+	/**
+	 * This PHY information field contains the number of short frames
+	 * received.  A short frame is simply a frame smaller then what is
+	 * allowed by either the SAS or SATA specification.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME,
+
+	/**
+	 * This PHY information field contains the number of frames received after
+	 * credit has been exhausted.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT,
+
+	/**
+	 * This PHY information field contains the number of frames received after
+	 * a DONE has been received.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE,
+
+	/**
+	 * This PHY information field contains the number of times the phy
+	 * failed to achieve DWORD synchronization during speed negotiation.
+	 */
+	SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR
+};
+
+enum scic_sds_phy_states {
+	/**
+	 * Simply the initial state for the base domain state machine.
+	 */
+	SCI_BASE_PHY_STATE_INITIAL,
+
+	/**
+	 * This state indicates that the phy has successfully been stopped.
+	 * In this state no new IO operations are permitted on this phy.
+	 * This state is entered from the INITIAL state.
+	 * This state is entered from the STARTING state.
+	 * This state is entered from the READY state.
+	 * This state is entered from the RESETTING state.
+	 */
+	SCI_BASE_PHY_STATE_STOPPED,
+
+	/**
+	 * This state indicates that the phy is in the process of becomming
+	 * ready.  In this state no new IO operations are permitted on this phy.
+	 * This state is entered from the STOPPED state.
+	 * This state is entered from the READY state.
+	 * This state is entered from the RESETTING state.
+	 */
+	SCI_BASE_PHY_STATE_STARTING,
+
+	/**
+	 * This state indicates the the phy is now ready.  Thus, the user
+	 * is able to perform IO operations utilizing this phy as long as it
+	 * is currently part of a valid port.
+	 * This state is entered from the STARTING state.
+	 */
+	SCI_BASE_PHY_STATE_READY,
+
+	/**
+	 * This state indicates that the phy is in the process of being reset.
+	 * In this state no new IO operations are permitted on this phy.
+	 * This state is entered from the READY state.
+	 */
+	SCI_BASE_PHY_STATE_RESETTING,
+
+	/**
+	 * Simply the final state for the base phy state machine.
+	 */
+	SCI_BASE_PHY_STATE_FINAL,
+};
+
+
+/**
+ * enum scic_sds_phy_starting_substates -
+ *
+ *
+ */
+enum scic_sds_phy_starting_substates {
+	/**
+	 * Initial state
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL,
+
+	/**
+	 * Wait state for the hardware OSSP event type notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN,
+
+	/**
+	 * Wait state for the PHY speed notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN,
+
+	/**
+	 * Wait state for the IAF Unsolicited frame notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF,
+
+	/**
+	 * Wait state for the request to consume power
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER,
+
+	/**
+	 * Wait state for request to consume power
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER,
+
+	/**
+	 * Wait state for the SATA PHY notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN,
+
+	/**
+	 * Wait for the SATA PHY speed notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN,
+
+	/**
+	 * Wait state for the SIGNATURE FIS unsolicited frame notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF,
+
+	/**
+	 * Exit state for this state machine
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL,
+};
+
+
+
+typedef enum sci_status (*scic_sds_phy_handler_t)(struct scic_sds_phy *);
+typedef enum sci_status (*scic_sds_phy_event_handler_t)(struct scic_sds_phy *, u32);
+typedef enum sci_status (*scic_sds_phy_frame_handler_t)(struct scic_sds_phy *, u32);
+typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *);
+
+struct scic_sds_phy_state_handler {
+	/**
+	 * The start_handler specifies the method invoked when there is an
+	 * attempt to start a phy.
+	 */
+	scic_sds_phy_handler_t start_handler;
+
+	/**
+	 * The stop_handler specifies the method invoked when there is an
+	 * attempt to stop a phy.
+	 */
+	scic_sds_phy_handler_t stop_handler;
+
+	/**
+	 * The reset_handler specifies the method invoked when there is an
+	 * attempt to reset a phy.
+	 */
+	scic_sds_phy_handler_t reset_handler;
+
+	/**
+	 * The destruct_handler specifies the method invoked when attempting to
+	 * destruct a phy.
+	 */
+	scic_sds_phy_handler_t destruct_handler;
+
+	/**
+	 * The state handler for unsolicited frames received from the SCU hardware.
+	 */
+	scic_sds_phy_frame_handler_t frame_handler;
+
+	/**
+	 * The state handler for events received from the SCU hardware.
+	 */
+	scic_sds_phy_event_handler_t event_handler;
+
+	/**
+	 * The state handler for staggered spinup.
+	 */
+	scic_sds_phy_power_handler_t consume_power_handler;
+
+};
+
+/**
+ * scic_sds_phy_get_index() -
+ *
+ * This macro returns the phy index for the specified phy
+ */
+#define scic_sds_phy_get_index(phy) \
+	((phy)->phy_index)
+
+/**
+ * scic_sds_phy_get_controller() - This macro returns the controller for this
+ *    phy
+ *
+ *
+ */
+#define scic_sds_phy_get_controller(phy) \
+	(scic_sds_port_get_controller((phy)->owning_port))
+
+/**
+ * scic_sds_phy_set_state_handlers() - This macro sets the state handlers for
+ *    this phy object
+ *
+ *
+ */
+#define scic_sds_phy_set_state_handlers(phy, handlers) \
+	((phy)->state_handlers = (handlers))
+
+/**
+ * scic_sds_phy_set_base_state_handlers() -
+ *
+ * This macro set the base state handlers for the phy object.
+ */
+#define scic_sds_phy_set_base_state_handlers(phy, state_id) \
+	scic_sds_phy_set_state_handlers(\
+		(phy), \
+		&scic_sds_phy_state_handler_table[(state_id)] \
+		)
+
+void scic_sds_phy_construct(
+	struct scic_sds_phy *this_phy,
+	struct scic_sds_port *owning_port,
+	u8 phy_index);
+
+struct scic_sds_port *scic_sds_phy_get_port(
+	struct scic_sds_phy *this_phy);
+
+void scic_sds_phy_set_port(
+	struct scic_sds_phy *this_phy,
+	struct scic_sds_port *owning_port);
+
+enum sci_status scic_sds_phy_initialize(
+	struct scic_sds_phy *this_phy,
+	struct scu_transport_layer_registers __iomem *transport_layer_registers,
+	struct scu_link_layer_registers __iomem *link_layer_registers);
+
+enum sci_status scic_sds_phy_start(
+	struct scic_sds_phy *this_phy);
+
+enum sci_status scic_sds_phy_stop(
+	struct scic_sds_phy *this_phy);
+
+enum sci_status scic_sds_phy_reset(
+	struct scic_sds_phy *this_phy);
+
+void scic_sds_phy_resume(
+	struct scic_sds_phy *this_phy);
+
+void scic_sds_phy_setup_transport(
+	struct scic_sds_phy *this_phy,
+	u32 device_id);
+
+enum sci_status scic_sds_phy_event_handler(
+	struct scic_sds_phy *this_phy,
+	u32 event_code);
+
+enum sci_status scic_sds_phy_frame_handler(
+	struct scic_sds_phy *this_phy,
+	u32 frame_index);
+
+enum sci_status scic_sds_phy_consume_power_handler(
+	struct scic_sds_phy *this_phy);
+
+void scic_sds_phy_get_sas_address(
+	struct scic_sds_phy *this_phy,
+	struct sci_sas_address *sas_address);
+
+void scic_sds_phy_get_attached_sas_address(
+	struct scic_sds_phy *this_phy,
+	struct sci_sas_address *sas_address);
+
+struct scic_phy_proto;
+void scic_sds_phy_get_protocols(
+	struct scic_sds_phy *sci_phy,
+	struct scic_phy_proto *protocols);
+enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy);
+
 struct isci_host;
 void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index);
 int isci_phy_control(struct asd_sas_phy *phy, enum phy_func func, void *buf);
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index d4bf6d2d8c9b..321935d9560b 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -55,8 +55,6 @@
 
 #include <linux/workqueue.h>
 #include "isci.h"
-#include "scic_phy.h"
-#include "scic_sds_phy.h"
 #include "scic_port.h"
 #include "port.h"
 #include "request.h"
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index 23390102514f..2baa215cb275 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -57,9 +57,7 @@
 #include "port.h"
 #include "remote_device.h"
 #include "request.h"
-#include "scic_phy.h"
 #include "scic_port.h"
-#include "scic_sds_phy.h"
 #include "scic_sds_port.h"
 #include "remote_node_context.h"
 #include "scu_event_codes.h"