diff options
author | Mika Westerberg <mika.westerberg@linux.intel.com> | 2018-02-05 14:32:59 +0300 |
---|---|---|
committer | Boris Brezillon <boris.brezillon@bootlin.com> | 2018-05-18 12:53:05 +0200 |
commit | c7d6a82d90e193b1e4daba957e3908f26306d491 (patch) | |
tree | adad9eaa28dc907782bc7ecacb4e4cd694e08dd1 /drivers | |
parent | f134fbbb4ff813dd227c9ce40b5c0b2078a77b07 (diff) | |
download | linux-c7d6a82d90e193b1e4daba957e3908f26306d491.tar.bz2 |
mtd: spi-nor: intel-spi: Fix atomic sequence handling
On many older systems using SW sequencer the PREOP_OPTYPE register
contains two preopcodes as following:
PREOP_OPTYPE=0xf2785006
The last two bytes are the opcodes decoded to:
0x50 - Write enable for volatile status register
0x06 - Write enable
The former is used to modify volatile bits in the status register. For
non-volatile bits the latter is needed. Preopcodes are used in SW
sequencer to send one command "atomically" without anything else
interfering the transfer. The sequence that gets executed is:
- Send preopcode (write enable) from PREOP_OPTYPE register
- Send the actual SPI command
- Poll busy bit in the status register (0x05, RDSR)
Commit 8c473dd61bb5 ("spi-nor: intel-spi: Don't assume OPMENU0/1 to be
programmed by BIOS") enabled atomic sequence handling but because both
preopcodes are programmed, the following happens:
if (preop >> 8)
val |= SSFSTS_CTL_SPOP;
Since on these systems preop >> 8 == 0x50 we end up picking volatile
write enable instead. Because of this the actual write command is pretty
much NOP unless there is a WREN latched in the chip already.
Furthermore we should not really just assume that WREN was issued in
previous call to intel_spi_write_reg() because that might not be the
case.
This updates driver to first check that the opcode is actually available
in PREOP_OPTYPE register and if not return error back to the spi-nor
core (if the controller is not locked we program it now). In addition we
save the opcode to ispi->atomic_preopcode field which is checked in next
call to intel_spi_sw_cycle() to actually enable atomic sequence using
the requested preopcode.
Fixes: 8c473dd61bb5 ("spi-nor: intel-spi: Don't assume OPMENU0/1 to be programmed by BIOS")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mtd/spi-nor/intel-spi.c | 76 |
1 files changed, 67 insertions, 9 deletions
diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c index 699951523179..8e98f4ab87c1 100644 --- a/drivers/mtd/spi-nor/intel-spi.c +++ b/drivers/mtd/spi-nor/intel-spi.c @@ -136,6 +136,7 @@ * @swseq_reg: Use SW sequencer in register reads/writes * @swseq_erase: Use SW sequencer in erase operation * @erase_64k: 64k erase supported + * @atomic_preopcode: Holds preopcode when atomic sequence is requested * @opcodes: Opcodes which are supported. This are programmed by BIOS * before it locks down the controller. */ @@ -153,6 +154,7 @@ struct intel_spi { bool swseq_reg; bool swseq_erase; bool erase_64k; + u8 atomic_preopcode; u8 opcodes[8]; }; @@ -474,7 +476,7 @@ static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, int len, int optype) { u32 val = 0, status; - u16 preop; + u8 atomic_preopcode; int ret; ret = intel_spi_opcode_index(ispi, opcode, optype); @@ -484,17 +486,42 @@ static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, int len, if (len > INTEL_SPI_FIFO_SZ) return -EINVAL; + /* + * Always clear it after each SW sequencer operation regardless + * of whether it is successful or not. + */ + atomic_preopcode = ispi->atomic_preopcode; + ispi->atomic_preopcode = 0; + /* Only mark 'Data Cycle' bit when there is data to be transferred */ if (len > 0) val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS; val |= ret << SSFSTS_CTL_COP_SHIFT; val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE; val |= SSFSTS_CTL_SCGO; - preop = readw(ispi->sregs + PREOP_OPTYPE); - if (preop) { - val |= SSFSTS_CTL_ACS; - if (preop >> 8) - val |= SSFSTS_CTL_SPOP; + if (atomic_preopcode) { + u16 preop; + + switch (optype) { + case OPTYPE_WRITE_NO_ADDR: + case OPTYPE_WRITE_WITH_ADDR: + /* Pick matching preopcode for the atomic sequence */ + preop = readw(ispi->sregs + PREOP_OPTYPE); + if ((preop & 0xff) == atomic_preopcode) + ; /* Do nothing */ + else if ((preop >> 8) == atomic_preopcode) + val |= SSFSTS_CTL_SPOP; + else + return -EINVAL; + + /* Enable atomic sequence */ + val |= SSFSTS_CTL_ACS; + break; + + default: + return -EINVAL; + } + } writel(val, ispi->sregs + SSFSTS_CTL); @@ -538,13 +565,31 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) /* * This is handled with atomic operation and preop code in Intel - * controller so skip it here now. If the controller is not locked, - * program the opcode to the PREOP register for later use. + * controller so we only verify that it is available. If the + * controller is not locked, program the opcode to the PREOP + * register for later use. + * + * When hardware sequencer is used there is no need to program + * any opcodes (it handles them automatically as part of a command). */ if (opcode == SPINOR_OP_WREN) { - if (!ispi->locked) + u16 preop; + + if (!ispi->swseq_reg) + return 0; + + preop = readw(ispi->sregs + PREOP_OPTYPE); + if ((preop & 0xff) != opcode && (preop >> 8) != opcode) { + if (ispi->locked) + return -EINVAL; writel(opcode, ispi->sregs + PREOP_OPTYPE); + } + /* + * This enables atomic sequence on next SW sycle. Will + * be cleared after next operation. + */ + ispi->atomic_preopcode = opcode; return 0; } @@ -569,6 +614,13 @@ static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len, u32 val, status; ssize_t ret; + /* + * Atomic sequence is not expected with HW sequencer reads. Make + * sure it is cleared regardless. + */ + if (WARN_ON_ONCE(ispi->atomic_preopcode)) + ispi->atomic_preopcode = 0; + switch (nor->read_opcode) { case SPINOR_OP_READ: case SPINOR_OP_READ_FAST: @@ -627,6 +679,9 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len, u32 val, status; ssize_t ret; + /* Not needed with HW sequencer write, make sure it is cleared */ + ispi->atomic_preopcode = 0; + while (len > 0) { block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ); @@ -707,6 +762,9 @@ static int intel_spi_erase(struct spi_nor *nor, loff_t offs) return 0; } + /* Not needed with HW sequencer erase, make sure it is cleared */ + ispi->atomic_preopcode = 0; + while (len > 0) { writel(offs, ispi->base + FADDR); |