drm/amd/pm: add SMU_13_0_7 PMFW headers

Add driver_if/ppsmc/pptable head files.

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

3 files changed, 1896 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_7.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_7.h
new file mode 100644
index 000000000000..d99b4b47d49d
--- /dev/null
+++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_7.h
@@ -0,0 +1,1562 @@
+/*
+ * Copyright 2022 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+#ifndef SMU13_DRIVER_IF_SMU_13_0_7_H
+#define SMU13_DRIVER_IF_SMU_13_0_7_H
+
+// *** IMPORTANT ***
+// PMFW TEAM: Always increment the interface version on any change to this file
+#define SMU13_DRIVER_IF_VERSION  0x28
+
+//Increment this version if SkuTable_t or BoardTable_t change
+#define PPTABLE_VERSION 0x1D
+
+#define NUM_GFXCLK_DPM_LEVELS    16
+#define NUM_SOCCLK_DPM_LEVELS    8
+#define NUM_MP0CLK_DPM_LEVELS    2
+#define NUM_DCLK_DPM_LEVELS      8
+#define NUM_VCLK_DPM_LEVELS      8
+#define NUM_DISPCLK_DPM_LEVELS   8
+#define NUM_DPPCLK_DPM_LEVELS    8
+#define NUM_DPREFCLK_DPM_LEVELS  8
+#define NUM_DCFCLK_DPM_LEVELS    8
+#define NUM_DTBCLK_DPM_LEVELS    8
+#define NUM_UCLK_DPM_LEVELS      4
+#define NUM_LINK_LEVELS          3
+#define NUM_FCLK_DPM_LEVELS      8
+#define NUM_OD_FAN_MAX_POINTS    6
+
+// Feature Control Defines
+#define FEATURE_FW_DATA_READ_BIT              0
+#define FEATURE_DPM_GFXCLK_BIT                1
+#define FEATURE_DPM_GFX_POWER_OPTIMIZER_BIT   2
+#define FEATURE_DPM_UCLK_BIT                  3
+#define FEATURE_DPM_FCLK_BIT                  4
+#define FEATURE_DPM_SOCCLK_BIT                5
+#define FEATURE_DPM_MP0CLK_BIT                6
+#define FEATURE_DPM_LINK_BIT                  7
+#define FEATURE_DPM_DCN_BIT                   8
+#define FEATURE_VMEMP_SCALING_BIT             9
+#define FEATURE_VDDIO_MEM_SCALING_BIT         10
+#define FEATURE_DS_GFXCLK_BIT                 11
+#define FEATURE_DS_SOCCLK_BIT                 12
+#define FEATURE_DS_FCLK_BIT                   13
+#define FEATURE_DS_LCLK_BIT                   14
+#define FEATURE_DS_DCFCLK_BIT                 15
+#define FEATURE_DS_UCLK_BIT                   16
+#define FEATURE_GFX_ULV_BIT                   17
+#define FEATURE_FW_DSTATE_BIT                 18
+#define FEATURE_GFXOFF_BIT                    19
+#define FEATURE_BACO_BIT                      20
+#define FEATURE_MM_DPM_BIT                    21
+#define FEATURE_SOC_MPCLK_DS_BIT              22
+#define FEATURE_BACO_MPCLK_DS_BIT             23
+#define FEATURE_THROTTLERS_BIT                24
+#define FEATURE_SMARTSHIFT_BIT                25
+#define FEATURE_GTHR_BIT                      26
+#define FEATURE_ACDC_BIT                      27
+#define FEATURE_VR0HOT_BIT                    28
+#define FEATURE_FW_CTF_BIT                    29
+#define FEATURE_FAN_CONTROL_BIT               30
+#define FEATURE_GFX_DCS_BIT                   31
+#define FEATURE_GFX_READ_MARGIN_BIT           32
+#define FEATURE_LED_DISPLAY_BIT               33
+#define FEATURE_GFXCLK_SPREAD_SPECTRUM_BIT    34
+#define FEATURE_OUT_OF_BAND_MONITOR_BIT       35
+#define FEATURE_OPTIMIZED_VMIN_BIT            36
+#define FEATURE_GFX_IMU_BIT                   37
+#define FEATURE_BOOT_TIME_CAL_BIT             38
+#define FEATURE_GFX_PCC_DFLL_BIT              39
+#define FEATURE_SOC_CG_BIT                    40
+#define FEATURE_DF_CSTATE_BIT                 41
+#define FEATURE_GFX_EDC_BIT                   42
+#define FEATURE_BOOT_POWER_OPT_BIT            43
+#define FEATURE_CLOCK_POWER_DOWN_BYPASS_BIT   44
+#define FEATURE_DS_VCN_BIT                    45
+#define FEATURE_BACO_CG_BIT                   46
+#define FEATURE_MEM_TEMP_READ_BIT             47
+#define FEATURE_ATHUB_MMHUB_PG_BIT            48
+#define FEATURE_SOC_PCC_BIT                   49
+#define FEATURE_SPARE_50_BIT                  50
+#define FEATURE_SPARE_51_BIT                  51
+#define FEATURE_SPARE_52_BIT                  52
+#define FEATURE_SPARE_53_BIT                  53
+#define FEATURE_SPARE_54_BIT                  54
+#define FEATURE_SPARE_55_BIT                  55
+#define FEATURE_SPARE_56_BIT                  56
+#define FEATURE_SPARE_57_BIT                  57
+#define FEATURE_SPARE_58_BIT                  58
+#define FEATURE_SPARE_59_BIT                  59
+#define FEATURE_SPARE_60_BIT                  60
+#define FEATURE_SPARE_61_BIT                  61
+#define FEATURE_SPARE_62_BIT                  62
+#define FEATURE_SPARE_63_BIT                  63
+#define NUM_FEATURES                          64
+
+//For use with feature control messages
+typedef enum {
+  FEATURE_PWR_ALL,
+  FEATURE_PWR_S5,
+  FEATURE_PWR_BACO,
+  FEATURE_PWR_SOC,
+  FEATURE_PWR_GFX,
+  FEATURE_PWR_DOMAIN_COUNT,
+} FEATURE_PWR_DOMAIN_e;
+
+
+// Debug Overrides Bitmask
+#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_VCN_FCLK      0x00000001
+#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_DCN_FCLK      0x00000002
+#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_MP0_FCLK      0x00000004
+#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_VCN_DCFCLK    0x00000008
+#define DEBUG_OVERRIDE_DISABLE_FAST_FCLK_TIMER         0x00000010
+#define DEBUG_OVERRIDE_DISABLE_VCN_PG                  0x00000020
+#define DEBUG_OVERRIDE_DISABLE_FMAX_VMAX               0x00000040
+#define DEBUG_OVERRIDE_DISABLE_IMU_FW_CHECKS           0x00000080
+#define DEBUG_OVERRIDE_DISABLE_D0i2_REENTRY_HSR_TIMER_CHECK 0x00000100
+#define DEBUG_OVERRIDE_DISABLE_DFLL                    0x00000200
+#define DEBUG_OVERRIDE_ENABLE_RLC_VF_BRINGUP_MODE      0x00000400
+#define DEBUG_OVERRIDE_DFLL_MASTER_MODE                0x00000800
+
+// VR Mapping Bit Defines
+#define VR_MAPPING_VR_SELECT_MASK  0x01
+#define VR_MAPPING_VR_SELECT_SHIFT 0x00
+
+#define VR_MAPPING_PLANE_SELECT_MASK  0x02
+#define VR_MAPPING_PLANE_SELECT_SHIFT 0x01
+
+// PSI Bit Defines
+#define PSI_SEL_VR0_PLANE0_PSI0  0x01
+#define PSI_SEL_VR0_PLANE0_PSI1  0x02
+#define PSI_SEL_VR0_PLANE1_PSI0  0x04
+#define PSI_SEL_VR0_PLANE1_PSI1  0x08
+#define PSI_SEL_VR1_PLANE0_PSI0  0x10
+#define PSI_SEL_VR1_PLANE0_PSI1  0x20
+#define PSI_SEL_VR1_PLANE1_PSI0  0x40
+#define PSI_SEL_VR1_PLANE1_PSI1  0x80
+
+typedef enum {
+  SVI_PSI_0, // Full phase count (default)
+  SVI_PSI_1, // Phase count 1st level
+  SVI_PSI_2, // Phase count 2nd level
+  SVI_PSI_3, // Single phase operation + active diode emulation
+  SVI_PSI_4, // Single phase operation + passive diode emulation *optional*
+  SVI_PSI_5, // Reserved
+  SVI_PSI_6, // Power down to 0V (voltage regulation disabled)
+  SVI_PSI_7, // Automated phase shedding and diode emulation
+} SVI_PSI_e;
+
+// Throttler Control/Status Bits
+#define THROTTLER_TEMP_EDGE_BIT        0
+#define THROTTLER_TEMP_HOTSPOT_BIT     1
+#define THROTTLER_TEMP_HOTSPOT_G_BIT   2
+#define THROTTLER_TEMP_HOTSPOT_M_BIT   3
+#define THROTTLER_TEMP_MEM_BIT         4
+#define THROTTLER_TEMP_VR_GFX_BIT      5
+#define THROTTLER_TEMP_VR_MEM0_BIT     6
+#define THROTTLER_TEMP_VR_MEM1_BIT     7
+#define THROTTLER_TEMP_VR_SOC_BIT      8
+#define THROTTLER_TEMP_VR_U_BIT        9
+#define THROTTLER_TEMP_LIQUID0_BIT     10
+#define THROTTLER_TEMP_LIQUID1_BIT     11
+#define THROTTLER_TEMP_PLX_BIT         12
+#define THROTTLER_TDC_GFX_BIT          13
+#define THROTTLER_TDC_SOC_BIT          14
+#define THROTTLER_TDC_U_BIT            15
+#define THROTTLER_PPT0_BIT             16
+#define THROTTLER_PPT1_BIT             17
+#define THROTTLER_PPT2_BIT             18
+#define THROTTLER_PPT3_BIT             19
+#define THROTTLER_FIT_BIT              20
+#define THROTTLER_GFX_APCC_PLUS_BIT    21
+#define THROTTLER_COUNT                22
+
+// FW DState Features Control Bits
+#define FW_DSTATE_SOC_ULV_BIT               0
+#define FW_DSTATE_G6_HSR_BIT                1
+#define FW_DSTATE_G6_PHY_VMEMP_OFF_BIT      2
+#define FW_DSTATE_SMN_DS_BIT                3
+#define FW_DSTATE_MP1_WHISPER_MODE_BIT      4
+#define FW_DSTATE_SOC_LIV_MIN_BIT           5
+#define FW_DSTATE_SOC_PLL_PWRDN_BIT         6
+#define FW_DSTATE_MEM_PLL_PWRDN_BIT         7
+#define FW_DSTATE_MALL_ALLOC_BIT            8
+#define FW_DSTATE_MEM_PSI_BIT               9
+#define FW_DSTATE_HSR_NON_STROBE_BIT        10
+#define FW_DSTATE_MP0_ENTER_WFI_BIT         11
+#define FW_DSTATE_U_ULV_BIT                 12
+#define FW_DSTATE_MALL_FLUSH_BIT            13
+#define FW_DSTATE_SOC_PSI_BIT               14
+#define FW_DSTATE_U_PSI_BIT                 15
+#define FW_DSTATE_UCP_DS_BIT                16
+#define FW_DSTATE_CSRCLK_DS_BIT             17
+#define FW_DSTATE_MMHUB_INTERLOCK_BIT       18
+#define FW_DSTATE_D0i3_2_QUIET_FW_BIT       19
+#define FW_DSTATE_CLDO_PRG_BIT              20
+#define FW_DSTATE_DF_PLL_PWRDN_BIT          21
+#define FW_DSTATE_U_LOW_PWR_MODE_EN_BIT     22
+#define FW_DSTATE_GFX_PSI6_BIT              23
+#define FW_DSTATE_GFX_VR_PWR_STAGE_BIT      24
+
+//LED Display Mask & Control Bits
+#define LED_DISPLAY_GFX_DPM_BIT            0
+#define LED_DISPLAY_PCIE_BIT               1
+#define LED_DISPLAY_ERROR_BIT              2
+
+
+#define MEM_TEMP_READ_OUT_OF_BAND_BIT          0
+#define MEM_TEMP_READ_IN_BAND_REFRESH_BIT      1
+#define MEM_TEMP_READ_IN_BAND_DUMMY_PSTATE_BIT 2
+
+typedef enum {
+  SMARTSHIFT_VERSION_1,
+  SMARTSHIFT_VERSION_2,
+  SMARTSHIFT_VERSION_3,
+} SMARTSHIFT_VERSION_e;
+
+typedef enum {
+  FOPT_CALC_AC_CALC_DC,
+  FOPT_PPTABLE_AC_CALC_DC,
+  FOPT_CALC_AC_PPTABLE_DC,
+  FOPT_PPTABLE_AC_PPTABLE_DC,
+} FOPT_CALC_e;
+
+typedef enum {
+  DRAM_BIT_WIDTH_DISABLED = 0,
+  DRAM_BIT_WIDTH_X_8 = 8,
+  DRAM_BIT_WIDTH_X_16 = 16,
+  DRAM_BIT_WIDTH_X_32 = 32,
+  DRAM_BIT_WIDTH_X_64 = 64,
+  DRAM_BIT_WIDTH_X_128 = 128,
+  DRAM_BIT_WIDTH_COUNT,
+} DRAM_BIT_WIDTH_TYPE_e;
+
+//I2C Interface
+#define NUM_I2C_CONTROLLERS                8
+
+#define I2C_CONTROLLER_ENABLED             1
+#define I2C_CONTROLLER_DISABLED            0
+
+#define MAX_SW_I2C_COMMANDS                24
+
+typedef enum {
+  I2C_CONTROLLER_PORT_0 = 0,  //CKSVII2C0
+  I2C_CONTROLLER_PORT_1 = 1,  //CKSVII2C1
+  I2C_CONTROLLER_PORT_COUNT,
+} I2cControllerPort_e;
+
+typedef enum {
+  I2C_CONTROLLER_NAME_VR_GFX = 0,
+  I2C_CONTROLLER_NAME_VR_SOC,
+  I2C_CONTROLLER_NAME_VR_VMEMP,
+  I2C_CONTROLLER_NAME_VR_VDDIO,
+  I2C_CONTROLLER_NAME_LIQUID0,
+  I2C_CONTROLLER_NAME_LIQUID1,
+  I2C_CONTROLLER_NAME_PLX,
+  I2C_CONTROLLER_NAME_OTHER,
+  I2C_CONTROLLER_NAME_COUNT,
+} I2cControllerName_e;
+
+typedef enum {
+  I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0,
+  I2C_CONTROLLER_THROTTLER_VR_GFX,
+  I2C_CONTROLLER_THROTTLER_VR_SOC,
+  I2C_CONTROLLER_THROTTLER_VR_VMEMP,
+  I2C_CONTROLLER_THROTTLER_VR_VDDIO,
+  I2C_CONTROLLER_THROTTLER_LIQUID0,
+  I2C_CONTROLLER_THROTTLER_LIQUID1,
+  I2C_CONTROLLER_THROTTLER_PLX,
+  I2C_CONTROLLER_THROTTLER_INA3221,
+  I2C_CONTROLLER_THROTTLER_COUNT,
+} I2cControllerThrottler_e;
+
+typedef enum {
+  I2C_CONTROLLER_PROTOCOL_VR_XPDE132G5,
+  I2C_CONTROLLER_PROTOCOL_VR_IR35217,
+  I2C_CONTROLLER_PROTOCOL_TMP_TMP102A,
+  I2C_CONTROLLER_PROTOCOL_INA3221,
+  I2C_CONTROLLER_PROTOCOL_COUNT,
+} I2cControllerProtocol_e;
+
+typedef struct {
+  uint8_t   Enabled;
+  uint8_t   Speed;
+  uint8_t   SlaveAddress;
+  uint8_t   ControllerPort;
+  uint8_t   ControllerName;
+  uint8_t   ThermalThrotter;
+  uint8_t   I2cProtocol;
+  uint8_t   PaddingConfig;
+} I2cControllerConfig_t;
+
+typedef enum {
+  I2C_PORT_SVD_SCL = 0,
+  I2C_PORT_GPIO,
+} I2cPort_e;
+
+typedef enum {
+  I2C_SPEED_FAST_50K = 0,      //50  Kbits/s
+  I2C_SPEED_FAST_100K,         //100 Kbits/s
+  I2C_SPEED_FAST_400K,         //400 Kbits/s
+  I2C_SPEED_FAST_PLUS_1M,      //1   Mbits/s (in fast mode)
+  I2C_SPEED_HIGH_1M,           //1   Mbits/s (in high speed mode)
+  I2C_SPEED_HIGH_2M,           //2.3 Mbits/s
+  I2C_SPEED_COUNT,
+} I2cSpeed_e;
+
+typedef enum {
+  I2C_CMD_READ = 0,
+  I2C_CMD_WRITE,
+  I2C_CMD_COUNT,
+} I2cCmdType_e;
+
+#define CMDCONFIG_STOP_BIT             0
+#define CMDCONFIG_RESTART_BIT          1
+#define CMDCONFIG_READWRITE_BIT        2 //bit should be 0 for read, 1 for write
+
+#define CMDCONFIG_STOP_MASK           (1 << CMDCONFIG_STOP_BIT)
+#define CMDCONFIG_RESTART_MASK        (1 << CMDCONFIG_RESTART_BIT)
+#define CMDCONFIG_READWRITE_MASK      (1 << CMDCONFIG_READWRITE_BIT)
+
+typedef struct {
+  uint8_t ReadWriteData;  //Return data for read. Data to send for write
+  uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command, and is a read or write
+} SwI2cCmd_t; //SW I2C Command Table
+
+typedef struct {
+  uint8_t     I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1)
+  uint8_t     I2CSpeed;          //Use I2cSpeed_e to indicate speed to select
+  uint8_t     SlaveAddress;      //Slave address of device
+  uint8_t     NumCmds;           //Number of commands
+
+  SwI2cCmd_t  SwI2cCmds[MAX_SW_I2C_COMMANDS];
+} SwI2cRequest_t; // SW I2C Request Table
+
+typedef struct {
+  SwI2cRequest_t SwI2cRequest;
+
+  uint32_t Spare[8];
+  uint32_t MmHubPadding[8]; // SMU internal use
+} SwI2cRequestExternal_t;
+
+typedef struct {
+  uint64_t mca_umc_status;
+  uint64_t mca_umc_addr;
+
+  uint16_t ce_count_lo_chip;
+  uint16_t ce_count_hi_chip;
+
+  uint32_t eccPadding;
+} EccInfo_t;
+
+typedef struct {
+  EccInfo_t  EccInfo[24];
+} EccInfoTable_t;
+
+//D3HOT sequences
+typedef enum {
+  BACO_SEQUENCE,
+  MSR_SEQUENCE,
+  BAMACO_SEQUENCE,
+  ULPS_SEQUENCE,
+  D3HOT_SEQUENCE_COUNT,
+} D3HOTSequence_e;
+
+//This is aligned with RSMU PGFSM Register Mapping
+typedef enum {
+  PG_DYNAMIC_MODE = 0,
+  PG_STATIC_MODE,
+} PowerGatingMode_e;
+
+//This is aligned with RSMU PGFSM Register Mapping
+typedef enum {
+  PG_POWER_DOWN = 0,
+  PG_POWER_UP,
+} PowerGatingSettings_e;
+
+typedef struct {
+  uint32_t a;  // store in IEEE float format in this variable
+  uint32_t b;  // store in IEEE float format in this variable
+  uint32_t c;  // store in IEEE float format in this variable
+} QuadraticInt_t;
+
+typedef struct {
+  uint32_t m;  // store in IEEE float format in this variable
+  uint32_t b;  // store in IEEE float format in this variable
+} LinearInt_t;
+
+typedef struct {
+  uint32_t a;  // store in IEEE float format in this variable
+  uint32_t b;  // store in IEEE float format in this variable
+  uint32_t c;  // store in IEEE float format in this variable
+} DroopInt_t;
+
+typedef enum {
+  DCS_ARCH_DISABLED,
+  DCS_ARCH_FADCS,
+  DCS_ARCH_ASYNC,
+} DCS_ARCH_e;
+
+//Only Clks that have DPM descriptors are listed here
+typedef enum {
+  PPCLK_GFXCLK = 0,
+  PPCLK_SOCCLK,
+  PPCLK_UCLK,
+  PPCLK_FCLK,
+  PPCLK_DCLK_0,
+  PPCLK_VCLK_0,
+  PPCLK_DCLK_1,
+  PPCLK_VCLK_1,
+  PPCLK_DISPCLK,
+  PPCLK_DPPCLK,
+  PPCLK_DPREFCLK,
+  PPCLK_DCFCLK,
+  PPCLK_DTBCLK,
+  PPCLK_COUNT,
+} PPCLK_e;
+
+typedef enum {
+  VOLTAGE_MODE_PPTABLE = 0,
+  VOLTAGE_MODE_FUSES,
+  VOLTAGE_MODE_COUNT,
+} VOLTAGE_MODE_e;
+
+
+typedef enum {
+  AVFS_VOLTAGE_GFX = 0,
+  AVFS_VOLTAGE_SOC,
+  AVFS_VOLTAGE_COUNT,
+} AVFS_VOLTAGE_TYPE_e;
+
+typedef enum {
+  AVFS_TEMP_COLD = 0,
+  AVFS_TEMP_HOT,
+  AVFS_TEMP_COUNT,
+} AVFS_TEMP_e;
+
+typedef enum {
+  AVFS_D_G,
+  AVFS_D_M_B,
+  AVFS_D_M_S,
+  AVFS_D_COUNT,
+} AVFS_D_e;
+
+typedef enum {
+  UCLK_DIV_BY_1 = 0,
+  UCLK_DIV_BY_2,
+  UCLK_DIV_BY_4,
+  UCLK_DIV_BY_8,
+} UCLK_DIV_e;
+
+typedef enum {
+  GPIO_INT_POLARITY_ACTIVE_LOW = 0,
+  GPIO_INT_POLARITY_ACTIVE_HIGH,
+} GpioIntPolarity_e;
+
+typedef enum {
+  PWR_CONFIG_TDP = 0,
+  PWR_CONFIG_TGP,
+  PWR_CONFIG_TCP_ESTIMATED,
+  PWR_CONFIG_TCP_MEASURED,
+} PwrConfig_e;
+
+typedef struct {
+  uint8_t        Padding;
+  uint8_t        SnapToDiscrete;      // 0 - Fine grained DPM, 1 - Discrete DPM
+  uint8_t        NumDiscreteLevels;   // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used
+  uint8_t        CalculateFopt;       // Indication whether FW should calculate Fopt or use values below. Reference FOPT_CALC_e
+  LinearInt_t    ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz)
+  uint32_t       Padding3[3];
+  uint16_t       Padding4;
+  uint16_t       FoptimalDc;          //Foptimal frequency in DC power mode.
+  uint16_t       FoptimalAc;          //Foptimal frequency in AC power mode.
+  uint16_t       Padding2;
+} DpmDescriptor_t;
+
+typedef enum  {
+  PPT_THROTTLER_PPT0,
+  PPT_THROTTLER_PPT1,
+  PPT_THROTTLER_PPT2,
+  PPT_THROTTLER_PPT3,
+  PPT_THROTTLER_COUNT
+} PPT_THROTTLER_e;
+
+typedef enum  {
+  TEMP_EDGE,
+  TEMP_HOTSPOT,
+  TEMP_HOTSPOT_G,
+  TEMP_HOTSPOT_M,
+  TEMP_MEM,
+  TEMP_VR_GFX,
+  TEMP_VR_MEM0,
+  TEMP_VR_MEM1,
+  TEMP_VR_SOC,
+  TEMP_VR_U,
+  TEMP_LIQUID0,
+  TEMP_LIQUID1,
+  TEMP_PLX,
+  TEMP_COUNT,
+} TEMP_e;
+
+typedef enum {
+  TDC_THROTTLER_GFX,
+  TDC_THROTTLER_SOC,
+  TDC_THROTTLER_U,
+  TDC_THROTTLER_COUNT
+} TDC_THROTTLER_e;
+
+typedef enum {
+  SVI_PLANE_GFX,
+  SVI_PLANE_SOC,
+  SVI_PLANE_VMEMP,
+  SVI_PLANE_VDDIO_MEM,
+  SVI_PLANE_U,
+  SVI_PLANE_COUNT,
+} SVI_PLANE_e;
+
+typedef enum {
+  PMFW_VOLT_PLANE_GFX,
+  PMFW_VOLT_PLANE_SOC,
+  PMFW_VOLT_PLANE_COUNT
+} PMFW_VOLT_PLANE_e;
+
+typedef enum {
+  CUSTOMER_VARIANT_ROW,
+  CUSTOMER_VARIANT_FALCON,
+  CUSTOMER_VARIANT_COUNT,
+} CUSTOMER_VARIANT_e;
+
+typedef enum {
+  POWER_SOURCE_AC,
+  POWER_SOURCE_DC,
+  POWER_SOURCE_COUNT,
+} POWER_SOURCE_e;
+
+typedef enum {
+  MEM_VENDOR_SAMSUNG,
+  MEM_VENDOR_INFINEON,
+  MEM_VENDOR_ELPIDA,
+  MEM_VENDOR_ETRON,
+  MEM_VENDOR_NANYA,
+  MEM_VENDOR_HYNIX,
+  MEM_VENDOR_MOSEL,
+  MEM_VENDOR_WINBOND,
+  MEM_VENDOR_ESMT,
+  MEM_VENDOR_PLACEHOLDER0,
+  MEM_VENDOR_PLACEHOLDER1,
+  MEM_VENDOR_PLACEHOLDER2,
+  MEM_VENDOR_PLACEHOLDER3,
+  MEM_VENDOR_PLACEHOLDER4,
+  MEM_VENDOR_PLACEHOLDER5,
+  MEM_VENDOR_MICRON,
+  MEM_VENDOR_COUNT,
+} MEM_VENDOR_e;
+
+typedef enum {
+  PP_GRTAVFS_HW_CPO_CTL_ZONE0,
+  PP_GRTAVFS_HW_CPO_CTL_ZONE1,
+  PP_GRTAVFS_HW_CPO_CTL_ZONE2,
+  PP_GRTAVFS_HW_CPO_CTL_ZONE3,
+  PP_GRTAVFS_HW_CPO_CTL_ZONE4,
+  PP_GRTAVFS_HW_CPO_EN_0_31_ZONE0,
+  PP_GRTAVFS_HW_CPO_EN_32_63_ZONE0,
+  PP_GRTAVFS_HW_CPO_EN_0_31_ZONE1,
+  PP_GRTAVFS_HW_CPO_EN_32_63_ZONE1,
+  PP_GRTAVFS_HW_CPO_EN_0_31_ZONE2,
+  PP_GRTAVFS_HW_CPO_EN_32_63_ZONE2,
+  PP_GRTAVFS_HW_CPO_EN_0_31_ZONE3,
+  PP_GRTAVFS_HW_CPO_EN_32_63_ZONE3,
+  PP_GRTAVFS_HW_CPO_EN_0_31_ZONE4,
+  PP_GRTAVFS_HW_CPO_EN_32_63_ZONE4,
+  PP_GRTAVFS_HW_ZONE0_VF,
+  PP_GRTAVFS_HW_ZONE1_VF1,
+  PP_GRTAVFS_HW_ZONE2_VF2,
+  PP_GRTAVFS_HW_ZONE3_VF3,
+  PP_GRTAVFS_HW_VOLTAGE_GB,
+  PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE0,
+  PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE1,
+  PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE2,
+  PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE3,
+  PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE4,
+  PP_GRTAVFS_HW_RESERVED_0,
+  PP_GRTAVFS_HW_RESERVED_1,
+  PP_GRTAVFS_HW_RESERVED_2,
+  PP_GRTAVFS_HW_RESERVED_3,
+  PP_GRTAVFS_HW_RESERVED_4,
+  PP_GRTAVFS_HW_RESERVED_5,
+  PP_GRTAVFS_HW_RESERVED_6,
+  PP_GRTAVFS_HW_FUSE_COUNT,
+} PP_GRTAVFS_HW_FUSE_e;
+
+typedef enum {
+  PP_GRTAVFS_FW_COMMON_PPVMIN_Z1_HOT_T0,
+  PP_GRTAVFS_FW_COMMON_PPVMIN_Z1_COLD_T0,
+  PP_GRTAVFS_FW_COMMON_PPVMIN_Z2_HOT_T0,
+  PP_GRTAVFS_FW_COMMON_PPVMIN_Z2_COLD_T0,
+  PP_GRTAVFS_FW_COMMON_PPVMIN_Z3_HOT_T0,
+  PP_GRTAVFS_FW_COMMON_PPVMIN_Z3_COLD_T0,
+  PP_GRTAVFS_FW_COMMON_PPVMIN_Z4_HOT_T0,
+  PP_GRTAVFS_FW_COMMON_PPVMIN_Z4_COLD_T0,
+  PP_GRTAVFS_FW_COMMON_SRAM_RM_Z0,
+  PP_GRTAVFS_FW_COMMON_SRAM_RM_Z1,
+  PP_GRTAVFS_FW_COMMON_SRAM_RM_Z2,
+  PP_GRTAVFS_FW_COMMON_SRAM_RM_Z3,
+  PP_GRTAVFS_FW_COMMON_SRAM_RM_Z4,
+  PP_GRTAVFS_FW_COMMON_FUSE_COUNT,
+} PP_GRTAVFS_FW_COMMON_FUSE_e;
+
+typedef enum {
+  PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_NEG_1,
+  PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_0,
+  PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_1,
+  PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_2,
+  PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_3,
+  PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_4,
+  PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_NEG_1,
+  PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_0,
+  PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_1,
+  PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_2,
+  PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_3,
+  PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_4,
+  PP_GRTAVFS_FW_SEP_FUSE_VF_NEG_1_FREQUENCY,
+  PP_GRTAVFS_FW_SEP_FUSE_VF4_FREQUENCY,
+  PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_0,
+  PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_1,
+  PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_2,
+  PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_3,
+  PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_4,
+  PP_GRTAVFS_FW_SEP_FUSE_COUNT,
+} PP_GRTAVFS_FW_SEP_FUSE_e;
+
+#define PP_NUM_RTAVFS_PWL_ZONES 5
+
+
+
+// VBIOS or PPLIB configures telemetry slope and offset. Only slope expected to be set for SVI3
+// Slope Q1.7, Offset Q1.2
+typedef struct {
+  int8_t   Offset; // in Amps
+  uint8_t  Padding;
+  uint16_t MaxCurrent; // in Amps
+} SviTelemetryScale_t;
+
+#define PP_NUM_OD_VF_CURVE_POINTS PP_NUM_RTAVFS_PWL_ZONES + 1
+
+
+#define PP_OD_FEATURE_VF_CURVE_BIT  0
+#define PP_OD_FEATURE_VMAX_BIT      1
+#define PP_OD_FEATURE_PPT_BIT       2
+#define PP_OD_FEATURE_FAN_CURVE_BIT 3
+#define PP_OD_FEATURE_FREQ_DETER_BIT 4
+#define PP_OD_FEATURE_FULL_CTRL_BIT 5
+#define PP_OD_FEATURE_TDC_BIT      6
+#define PP_OD_FEATURE_GFXCLK_BIT      7
+#define PP_OD_FEATURE_UCLK_BIT      8
+
+typedef enum {
+  PP_OD_POWER_FEATURE_ALWAYS_ENABLED,
+  PP_OD_POWER_FEATURE_DISABLED_WHILE_GAMING,
+  PP_OD_POWER_FEATURE_ALWAYS_DISABLED,
+} PP_OD_POWER_FEATURE_e;
+
+typedef struct {
+  uint32_t FeatureCtrlMask;
+
+  //Voltage control
+  int16_t                VoltageOffsetPerZoneBoundary[PP_NUM_OD_VF_CURVE_POINTS];
+  uint16_t               VddGfxVmax;         // in mV
+
+  uint8_t                IdlePwrSavingFeaturesCtrl;
+  uint8_t                RuntimePwrSavingFeaturesCtrl;
+
+  //Frequency changes
+  uint16_t               GfxclkFmin;           // MHz
+  uint16_t               GfxclkFmax;           // MHz
+  uint16_t               UclkFmin;             // MHz
+  uint16_t               UclkFmax;             // MHz
+
+  //PPT
+  int16_t                Ppt;         // %
+  int16_t                Tdc;
+
+  //Fan control
+  uint8_t                FanLinearPwmPoints[NUM_OD_FAN_MAX_POINTS];
+  uint8_t                FanLinearTempPoints[NUM_OD_FAN_MAX_POINTS];
+  uint16_t               FanMaximumRpm;
+  uint16_t               FanMinimumPwm;
+  uint16_t               FanAcousticLimitRpm;
+  uint16_t               FanTargetTemperature; // Degree Celcius
+  uint8_t                FanZeroRpmEnable;
+  uint8_t                FanZeroRpmStopTemp;
+  uint8_t                FanMode;
+  uint8_t                Padding[1];
+
+
+  uint32_t               Spare[13];
+  uint32_t               MmHubPadding[8]; // SMU internal use. Adding here instead of external as a workaround
+} OverDriveTable_t;
+
+typedef struct {
+  OverDriveTable_t OverDriveTable;
+
+} OverDriveTableExternal_t;
+
+typedef struct {
+  uint32_t FeatureCtrlMask;
+
+  int16_t VoltageOffsetPerZoneBoundary;
+  uint16_t               VddGfxVmax;         // in mV
+
+  uint8_t                IdlePwrSavingFeaturesCtrl;
+  uint8_t                RuntimePwrSavingFeaturesCtrl;
+
+  uint16_t               GfxclkFmin;           // MHz
+  uint16_t               GfxclkFmax;           // MHz
+  uint16_t               UclkFmin;             // MHz
+  uint16_t               UclkFmax;             // MHz
+
+  //PPT
+  int16_t                Ppt;         // %
+  int16_t                Tdc;
+
+  uint8_t                FanLinearPwmPoints;
+  uint8_t                FanLinearTempPoints;
+  uint16_t               FanMaximumRpm;
+  uint16_t               FanMinimumPwm;
+  uint16_t               FanAcousticLimitRpm;
+  uint16_t               FanTargetTemperature; // Degree Celcius
+  uint8_t                FanZeroRpmEnable;
+  uint8_t                FanZeroRpmStopTemp;
+  uint8_t                FanMode;
+  uint8_t                Padding[1];
+
+
+  uint32_t               Spare[13];
+
+} OverDriveLimits_t;
+
+
+typedef enum {
+  BOARD_GPIO_SMUIO_0,
+  BOARD_GPIO_SMUIO_1,
+  BOARD_GPIO_SMUIO_2,
+  BOARD_GPIO_SMUIO_3,
+  BOARD_GPIO_SMUIO_4,
+  BOARD_GPIO_SMUIO_5,
+  BOARD_GPIO_SMUIO_6,
+  BOARD_GPIO_SMUIO_7,
+  BOARD_GPIO_SMUIO_8,
+  BOARD_GPIO_SMUIO_9,
+  BOARD_GPIO_SMUIO_10,
+  BOARD_GPIO_SMUIO_11,
+  BOARD_GPIO_SMUIO_12,
+  BOARD_GPIO_SMUIO_13,
+  BOARD_GPIO_SMUIO_14,
+  BOARD_GPIO_SMUIO_15,
+  BOARD_GPIO_SMUIO_16,
+  BOARD_GPIO_SMUIO_17,
+  BOARD_GPIO_SMUIO_18,
+  BOARD_GPIO_SMUIO_19,
+  BOARD_GPIO_SMUIO_20,
+  BOARD_GPIO_SMUIO_21,
+  BOARD_GPIO_SMUIO_22,
+  BOARD_GPIO_SMUIO_23,
+  BOARD_GPIO_SMUIO_24,
+  BOARD_GPIO_SMUIO_25,
+  BOARD_GPIO_SMUIO_26,
+  BOARD_GPIO_SMUIO_27,
+  BOARD_GPIO_SMUIO_28,
+  BOARD_GPIO_SMUIO_29,
+  BOARD_GPIO_SMUIO_30,
+  BOARD_GPIO_SMUIO_31,
+  MAX_BOARD_GPIO_SMUIO_NUM,
+  BOARD_GPIO_DC_GEN_A,
+  BOARD_GPIO_DC_GEN_B,
+  BOARD_GPIO_DC_GEN_C,
+  BOARD_GPIO_DC_GEN_D,
+  BOARD_GPIO_DC_GEN_E,
+  BOARD_GPIO_DC_GEN_F,
+  BOARD_GPIO_DC_GEN_G,
+  BOARD_GPIO_DC_GENLK_CLK,
+  BOARD_GPIO_DC_GENLK_VSYNC,
+  BOARD_GPIO_DC_SWAPLOCK_A,
+  BOARD_GPIO_DC_SWAPLOCK_B,
+} BOARD_GPIO_TYPE_e;
+
+#define INVALID_BOARD_GPIO 0xFF
+
+
+typedef struct {
+  //PLL 0
+  uint16_t InitGfxclk_bypass;
+  uint16_t InitSocclk;
+  uint16_t InitMp0clk;
+  uint16_t InitMpioclk;
+  uint16_t InitSmnclk;
+  uint16_t InitUcpclk;
+  uint16_t InitCsrclk;
+  //PLL 1
+
+  uint16_t InitDprefclk;
+  uint16_t InitDcfclk;
+  uint16_t InitDtbclk;
+  //PLL 2
+  uint16_t InitDclk; //assume same DCLK/VCLK for both instances
+  uint16_t InitVclk;
+  // PLL 3
+  uint16_t InitUsbdfsclk;
+  uint16_t InitMp1clk;
+  uint16_t InitLclk;
+  uint16_t InitBaco400clk_bypass;
+  uint16_t InitBaco1200clk_bypass;
+  uint16_t InitBaco700clk_bypass;
+  // PLL 4
+  uint16_t InitFclk;
+  // PLL 5
+  uint16_t InitGfxclk_clkb;
+
+  //PLL 6
+  uint8_t InitUclkDPMState;    // =0,1,2,3, frequency from FreqTableUclk
+
+  uint8_t Padding[3];
+
+  uint32_t InitVcoFreqPll0;
+  uint32_t InitVcoFreqPll1;
+  uint32_t InitVcoFreqPll2;
+  uint32_t InitVcoFreqPll3;
+  uint32_t InitVcoFreqPll4;
+  uint32_t InitVcoFreqPll5;
+  uint32_t InitVcoFreqPll6;
+
+  //encoding will change depending on SVI2/SVI3
+  uint16_t InitGfx;     // In mV(Q2) ,  should be 0?
+  uint16_t InitSoc;     // In mV(Q2)
+  uint16_t InitU; // In Mv(Q2) not applicable
+
+  uint16_t Padding2;
+
+  uint32_t Spare[8];
+
+} BootValues_t;
+
+
+typedef struct {
+   uint16_t Power[PPT_THROTTLER_COUNT][POWER_SOURCE_COUNT]; // Watts
+  uint16_t Tdc[TDC_THROTTLER_COUNT];             // Amps
+
+  uint16_t Temperature[TEMP_COUNT]; // Celsius
+
+  uint8_t  PwmLimitMin;
+  uint8_t  PwmLimitMax;
+  uint8_t  FanTargetTemperature;
+  uint8_t  Spare1[1];
+
+  uint16_t AcousticTargetRpmThresholdMin;
+  uint16_t AcousticTargetRpmThresholdMax;
+
+  uint16_t AcousticLimitRpmThresholdMin;
+  uint16_t AcousticLimitRpmThresholdMax;
+
+  uint16_t  PccLimitMin;
+  uint16_t  PccLimitMax;
+
+  uint16_t  FanStopTempMin;
+  uint16_t  FanStopTempMax;
+  uint16_t  FanStartTempMin;
+  uint16_t  FanStartTempMax;
+
+  uint32_t Spare[12];
+
+} MsgLimits_t;
+
+typedef struct {
+  uint16_t BaseClockAc;
+  uint16_t GameClockAc;
+  uint16_t BoostClockAc;
+  uint16_t BaseClockDc;
+  uint16_t GameClockDc;
+  uint16_t BoostClockDc;
+
+  uint32_t Reserved[4];
+} DriverReportedClocks_t;
+
+typedef struct {
+  uint8_t           DcBtcEnabled;
+  uint8_t           Padding[3];
+
+  uint16_t          DcTol;            // mV Q2
+  uint16_t          DcBtcGb;       // mV Q2
+
+  uint16_t          DcBtcMin;       // mV Q2
+  uint16_t          DcBtcMax;       // mV Q2
+
+  LinearInt_t       DcBtcGbScalar;
+
+} AvfsDcBtcParams_t;
+
+typedef struct {
+  uint16_t       AvfsTemp[AVFS_TEMP_COUNT]; //in degrees C
+  uint16_t      VftFMin;  // in MHz
+  uint16_t      VInversion; // in mV Q2
+  QuadraticInt_t qVft[AVFS_TEMP_COUNT];
+  QuadraticInt_t qAvfsGb;
+  QuadraticInt_t qAvfsGb2;
+} AvfsFuseOverride_t;
+
+typedef struct {
+  // SECTION: Version
+
+  uint32_t Version; // should be unique to each SKU(i.e if any value changes in below structure then this value must be different)
+
+  // SECTION: Feature Control
+  uint32_t FeaturesToRun[NUM_FEATURES / 32]; // Features that PMFW will attempt to enable. Use FEATURE_*_BIT as mapping
+
+  // SECTION: Miscellaneous Configuration
+  uint8_t      TotalPowerConfig;    // Determines how PMFW calculates the power. Use defines from PwrConfig_e
+  uint8_t      CustomerVariant; //To specify if this PPTable is intended for a particular customer. Use defines from CUSTOMER_VARIANT_e
+  uint8_t      MemoryTemperatureTypeMask; // Bit mapping indicating which methods of memory temperature reading are enabled. Use defines from MEM_TEMP_*BIT
+  uint8_t      SmartShiftVersion; // Determine what SmartShift feature version is supported Use defines from SMARTSHIFT_VERSION_e
+
+  // SECTION: Infrastructure Limits
+  uint16_t SocketPowerLimitAc[PPT_THROTTLER_COUNT]; // In Watts. Power limit that PMFW attempts to control to in AC mode. Multiple limits supported
+  uint16_t SocketPowerLimitDc[PPT_THROTTLER_COUNT];  // In Watts. Power limit that PMFW attempts to control to in DC mode. Multiple limits supported
+
+  uint16_t SocketPowerLimitSmartShift2; // In Watts. Power limit used SmartShift
+
+  //if set to 1, SocketPowerLimitAc and SocketPowerLimitDc will be interpreted as legacy programs(i.e absolute power). If 0, all except index 0 will be scalars
+  //relative index 0
+  uint8_t  EnableLegacyPptLimit;
+  uint8_t  UseInputTelemetry; //applicable to SVI3 only and only to be set if VRs support
+  uint8_t  SmartShiftMinReportedPptinDcs; //minimum possible active power consumption for this SKU. Used for SmartShift power reporting
+
+  uint8_t  PaddingPpt[1];
+
+  uint16_t VrTdcLimit[TDC_THROTTLER_COUNT];             // In Amperes. Current limit associated with VR regulator maximum temperature
+
+  uint16_t PlatformTdcLimit[TDC_THROTTLER_COUNT];             // In Amperes. Current limit associated with platform maximum temperature per VR current rail
+
+  uint16_t TemperatureLimit[TEMP_COUNT]; // In degrees Celsius. Temperature limit associated with each input
+
+  uint16_t HwCtfTempLimit; // In degrees Celsius. Temperature above which HW will trigger CTF. Consumed by VBIOS only
+
+  uint16_t PaddingInfra;
+
+  // Per year normalized Vmax state failure rates (sum of the two domains divided by life time in years)
+  uint32_t FitControllerFailureRateLimit; //in IEEE float
+  //Expected GFX Duty Cycle at Vmax.
+  uint32_t FitControllerGfxDutyCycle; // in IEEE float
+  //Expected SOC Duty Cycle at Vmax.
+  uint32_t FitControllerSocDutyCycle; // in IEEE float
+
+  //This offset will be deducted from the controller output to before it goes through the SOC Vset limiter block.
+  uint32_t FitControllerSocOffset;  //in IEEE float
+
+  uint32_t     GfxApccPlusResidencyLimit; // Percentage value. Used by APCC+ controller to control PCC residency to some value
+
+  // SECTION: Throttler settings
+  uint32_t ThrottlerControlMask;   // See THROTTLER_*_BIT for mapping
+
+  // SECTION: FW DSTATE Settings
+  uint32_t FwDStateMask;           // See FW_DSTATE_*_BIT for mapping
+
+  // SECTION: Voltage Control Parameters
+  uint16_t  UlvVoltageOffset[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2). ULV offset used in either GFX_ULV or SOC_ULV(part of FW_DSTATE)
+
+  uint16_t     UlvVoltageOffsetU; // In mV(Q2). ULV offset used in either U_ULV(part of FW_DSTATE)
+  uint16_t     DeepUlvVoltageOffsetSoc;        // In mV(Q2)  Long Idle Vmin (deep ULV), for VDD_SOC as part of FW_DSTATE
+
+  // Voltage Limits
+  uint16_t     DefaultMaxVoltage[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2) Maximum voltage without FIT controller enabled
+  uint16_t     BoostMaxVoltage[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2) Maximum voltage with FIT controller enabled
+
+  //Vmin Optimizations
+  int16_t         VminTempHystersis[PMFW_VOLT_PLANE_COUNT]; // Celsius Temperature hysteresis for switching between low/high temperature values for Vmin
+  int16_t         VminTempThreshold[PMFW_VOLT_PLANE_COUNT]; // Celsius Temperature threshold for switching between low/high temperature values for Vmin
+  uint16_t        Vmin_Hot_T0[PMFW_VOLT_PLANE_COUNT];            //In mV(Q2) Initial (pre-aging) Vset to be used at hot.
+  uint16_t        Vmin_Cold_T0[PMFW_VOLT_PLANE_COUNT];           //In mV(Q2) Initial (pre-aging) Vset to be used at cold.
+  uint16_t        Vmin_Hot_Eol[PMFW_VOLT_PLANE_COUNT];           //In mV(Q2) End-of-life Vset to be used at hot.
+  uint16_t        Vmin_Cold_Eol[PMFW_VOLT_PLANE_COUNT];          //In mV(Q2) End-of-life Vset to be used at cold.
+  uint16_t        Vmin_Aging_Offset[PMFW_VOLT_PLANE_COUNT];      //In mV(Q2) Worst-case aging margin
+  uint16_t        Vmin_Plat_Offset_Hot[PMFW_VOLT_PLANE_COUNT];   //In mV(Q2) Platform offset apply to T0 Hot
+  uint16_t        Vmin_Plat_Offset_Cold[PMFW_VOLT_PLANE_COUNT];  //In mV(Q2) Platform offset apply to T0 Cold
+
+  //This is a fixed/minimum VMIN aging degradation offset which is applied at T0. This reflects the minimum amount of aging already accounted for.
+  uint16_t        VcBtcFixedVminAgingOffset[PMFW_VOLT_PLANE_COUNT];
+  //Linear offset or GB term to account for mis-correlation between PSM and Vmin shift trends across parts.
+  uint16_t        VcBtcVmin2PsmDegrationGb[PMFW_VOLT_PLANE_COUNT];
+  //Scalar coefficient of the PSM aging degradation function
+  uint32_t        VcBtcPsmA[PMFW_VOLT_PLANE_COUNT];                   // A_PSM
+  //Exponential coefficient of the PSM aging degradation function
+  uint32_t        VcBtcPsmB[PMFW_VOLT_PLANE_COUNT];                   // B_PSM
+  //Scalar coefficient of the VMIN aging degradation function. Specified as worst case between hot and cold.
+  uint32_t        VcBtcVminA[PMFW_VOLT_PLANE_COUNT];                  // A_VMIN
+  //Exponential coefficient of the VMIN aging degradation function. Specified as worst case between hot and cold.
+  uint32_t        VcBtcVminB[PMFW_VOLT_PLANE_COUNT];                  // B_VMIN
+
+  uint8_t        PerPartVminEnabled[PMFW_VOLT_PLANE_COUNT];
+  uint8_t        VcBtcEnabled[PMFW_VOLT_PLANE_COUNT];
+
+  uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms
+  uint16_t SocketPowerLimitDcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms
+
+  uint32_t       SpareVmin[12];
+
+
+  //SECTION: DPM Configuration 1
+  DpmDescriptor_t DpmDescriptor[PPCLK_COUNT];
+
+  uint16_t       FreqTableGfx      [NUM_GFXCLK_DPM_LEVELS  ];     // In MHz
+  uint16_t       FreqTableVclk     [NUM_VCLK_DPM_LEVELS    ];     // In MHz
+  uint16_t       FreqTableDclk     [NUM_DCLK_DPM_LEVELS    ];     // In MHz
+  uint16_t       FreqTableSocclk   [NUM_SOCCLK_DPM_LEVELS  ];     // In MHz
+  uint16_t       FreqTableUclk     [NUM_UCLK_DPM_LEVELS    ];     // In MHz
+  uint16_t       FreqTableDispclk  [NUM_DISPCLK_DPM_LEVELS ];     // In MHz
+  uint16_t       FreqTableDppClk   [NUM_DPPCLK_DPM_LEVELS  ];     // In MHz
+  uint16_t       FreqTableDprefclk [NUM_DPREFCLK_DPM_LEVELS];     // In MHz
+  uint16_t       FreqTableDcfclk   [NUM_DCFCLK_DPM_LEVELS  ];     // In MHz
+  uint16_t       FreqTableDtbclk   [NUM_DTBCLK_DPM_LEVELS  ];     // In MHz
+  uint16_t       FreqTableFclk     [NUM_FCLK_DPM_LEVELS    ];     // In MHz
+
+  uint32_t       DcModeMaxFreq     [PPCLK_COUNT            ];     // In MHz
+
+  // SECTION: DPM Configuration 2
+  uint16_t       Mp0clkFreq        [NUM_MP0CLK_DPM_LEVELS];       // in MHz
+  uint16_t       Mp0DpmVoltage     [NUM_MP0CLK_DPM_LEVELS];       // mV(Q2)
+
+  uint8_t         GfxclkSpare[2];
+  uint16_t        GfxclkFreqCap;
+
+  //GFX Idle Power Settings
+  uint16_t        GfxclkFgfxoffEntry;   // in Mhz
+  uint16_t        GfxclkFgfxoffExitImu; // in Mhz
+  uint16_t        GfxclkFgfxoffExitRlc; // in Mhz
+  uint16_t        GfxclkThrottleClock;  //Used primarily in DCS
+  uint8_t         EnableGfxPowerStagesGpio; //Genlk_vsync GPIO flag used to control gfx power stages
+  uint8_t         GfxIdlePadding;
+
+  uint8_t          SmsRepairWRCKClkDivEn;
+  uint8_t          SmsRepairWRCKClkDivVal;
+  uint8_t          GfxOffEntryEarlyMGCGEn;
+  uint8_t          GfxOffEntryForceCGCGEn;
+  uint8_t          GfxOffEntryForceCGCGDelayEn;
+  uint8_t          GfxOffEntryForceCGCGDelayVal; // in microseconds
+
+  uint16_t        GfxclkFreqGfxUlv; // in MHz
+  uint8_t         GfxIdlePadding2[2];
+
+  uint32_t        GfxoffSpare[16];
+
+  // GFX GPO
+  uint32_t        GfxGpoSpare[16];
+
+  // GFX DCS
+
+  uint16_t        DcsGfxOffVoltage;     //Voltage in mV(Q2) applied to VDDGFX when entering DCS GFXOFF phase
+  uint16_t        PaddingDcs;
+
+  uint16_t        DcsMinGfxOffTime;     //Minimum amount of time PMFW shuts GFX OFF as part of GFX DCS phase
+  uint16_t        DcsMaxGfxOffTime;      //Maximum amount of time PMFW can shut GFX OFF as part of GFX DCS phase at a stretch.
+
+  uint32_t        DcsMinCreditAccum;    //Min amount of positive credit accumulation before waking GFX up as part of DCS.
+
+  uint16_t        DcsExitHysteresis;    //The min amount of time power credit accumulator should have a value > 0 before SMU exits the DCS throttling phase.
+  uint16_t        DcsTimeout;           //This is the amount of time SMU FW waits for RLC to put GFX into GFXOFF before reverting to the fallback mechanism of throttling GFXCLK to Fmin.
+
+
+  uint32_t        DcsSpare[16];
+
+  // UCLK section
+  uint8_t      UseStrobeModeOptimizations; //Set to indicate that FW should use strobe mode optimizations
+  uint8_t      PaddingMem[3];
+
+  uint8_t      UclkDpmPstates     [NUM_UCLK_DPM_LEVELS];     // 4 DPM states, 0-P0, 1-P1, 2-P2, 3-P3.
+  uint8_t      FreqTableUclkDiv  [NUM_UCLK_DPM_LEVELS    ];     // 0:Div-1, 1:Div-1/2, 2:Div-1/4, 3:Div-1/8
+
+  uint16_t     MemVmempVoltage   [NUM_UCLK_DPM_LEVELS];         // mV(Q2)
+  uint16_t     MemVddioVoltage    [NUM_UCLK_DPM_LEVELS];         // mV(Q2)
+
+  //FCLK Section
+
+  uint8_t      FclkDpmUPstates[NUM_FCLK_DPM_LEVELS]; // U P-state ID associated with each FCLK DPM state.
+  uint16_t     FclkDpmVddU[NUM_FCLK_DPM_LEVELS]; // mV(Q2) Vset U voltage associated with each FCLK DPM state.
+  uint16_t     FclkDpmUSpeed[NUM_FCLK_DPM_LEVELS]; //U speed associated with each FCLK DPM state
+  uint16_t     FclkDpmDisallowPstateFreq;  //Frequency which FW will target when indicated that display config cannot support P-state. Set to 0 use FW calculated value
+  uint16_t     PaddingFclk;
+
+  // Link DPM Settings
+  uint8_t      PcieGenSpeed[NUM_LINK_LEVELS];           ///< 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 3:PciE-gen4
+  uint8_t      PcieLaneCount[NUM_LINK_LEVELS];          ///< 1=x1, 2=x2, 3=x4, 4=x8, 5=x12, 6=x16
+  uint16_t     LclkFreq[NUM_LINK_LEVELS];
+
+  // SECTION: Fan Control
+  uint16_t     FanStopTemp[TEMP_COUNT];          //Celsius
+  uint16_t     FanStartTemp[TEMP_COUNT];         //Celsius
+
+  uint16_t     FanGain[TEMP_COUNT];
+  uint16_t     FanGainPadding;
+
+  uint16_t     FanPwmMin;
+  uint16_t     AcousticTargetRpmThreshold;
+  uint16_t     AcousticLimitRpmThreshold;
+  uint16_t     FanMaximumRpm;
+  uint16_t     MGpuAcousticLimitRpmThreshold;
+  uint16_t     FanTargetGfxclk;
+  uint32_t     TempInputSelectMask;
+  uint8_t      FanZeroRpmEnable;
+  uint8_t      FanTachEdgePerRev;
+  uint16_t     FanTargetTemperature[TEMP_COUNT];
+
+  // The following are AFC override parameters. Leave at 0 to use FW defaults.
+  int16_t      FuzzyFan_ErrorSetDelta;
+  int16_t      FuzzyFan_ErrorRateSetDelta;
+  int16_t      FuzzyFan_PwmSetDelta;
+  uint16_t     FuzzyFan_Reserved;
+
+  uint16_t     FwCtfLimit[TEMP_COUNT];
+
+  uint16_t IntakeTempEnableRPM;
+  int16_t IntakeTempOffsetTemp;
+  uint16_t IntakeTempReleaseTemp;
+  uint16_t IntakeTempHighIntakeAcousticLimit;
+  uint16_t IntakeTempAcouticLimitReleaseRate;
+
+  uint16_t FanStalledTempLimitOffset;
+  uint16_t FanStalledTriggerRpm;
+  uint16_t FanAbnormalTriggerRpm;
+  uint16_t FanPadding;
+
+  uint32_t     FanSpare[14];
+
+  // SECTION: VDD_GFX AVFS
+
+  uint8_t      OverrideGfxAvfsFuses;
+  uint8_t      GfxAvfsPadding[3];
+
+  uint32_t     L2HwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT]; //see fusedoc for encoding
+  uint32_t     SeHwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT];
+
+  uint32_t     CommonRtAvfs[PP_GRTAVFS_FW_COMMON_FUSE_COUNT];
+
+  uint32_t     L2FwRtAvfsFuses[PP_GRTAVFS_FW_SEP_FUSE_COUNT];
+  uint32_t     SeFwRtAvfsFuses[PP_GRTAVFS_FW_SEP_FUSE_COUNT];
+
+  uint32_t    Droop_PWL_F[PP_NUM_RTAVFS_PWL_ZONES];
+  uint32_t    Droop_PWL_a[PP_NUM_RTAVFS_PWL_ZONES];
+  uint32_t    Droop_PWL_b[PP_NUM_RTAVFS_PWL_ZONES];
+  uint32_t    Droop_PWL_c[PP_NUM_RTAVFS_PWL_ZONES];
+
+  uint32_t   Static_PWL_Offset[PP_NUM_RTAVFS_PWL_ZONES];
+
+  uint32_t   dGbV_dT_vmin;
+  uint32_t   dGbV_dT_vmax;
+
+  //Unused: PMFW-9370
+  uint32_t   V2F_vmin_range_low;
+  uint32_t   V2F_vmin_range_high;
+  uint32_t   V2F_vmax_range_low;
+  uint32_t   V2F_vmax_range_high;
+
+  AvfsDcBtcParams_t DcBtcGfxParams;
+
+  uint32_t   GfxAvfsSpare[32];
+
+  //SECTION: VDD_SOC AVFS
+
+  uint8_t      OverrideSocAvfsFuses;
+  uint8_t      MinSocAvfsRevision;
+  uint8_t      SocAvfsPadding[2];
+
+  AvfsFuseOverride_t SocAvfsFuseOverride[AVFS_D_COUNT];
+
+  DroopInt_t        dBtcGbSoc[AVFS_D_COUNT];            // GHz->V BtcGb
+
+  LinearInt_t       qAgingGb[AVFS_D_COUNT];          // GHz->V
+
+  QuadraticInt_t    qStaticVoltageOffset[AVFS_D_COUNT]; // GHz->V
+
+  AvfsDcBtcParams_t DcBtcSocParams[AVFS_D_COUNT];
+
+  uint32_t   SocAvfsSpare[32];
+
+  //SECTION: Boot clock and voltage values
+  BootValues_t BootValues;
+
+  //SECTION: Driver Reported Clocks
+  DriverReportedClocks_t DriverReportedClocks;
+
+  //SECTION: Message Limits
+  MsgLimits_t MsgLimits;
+
+  //SECTION: OverDrive Limits
+  OverDriveLimits_t OverDriveLimitsMin;
+  OverDriveLimits_t OverDriveLimitsBasicMax;
+  OverDriveLimits_t OverDriveLimitsAdvancedMax;
+
+  // SECTION: Advanced Options
+  uint32_t          DebugOverrides;
+
+  // SECTION: Sku Reserved
+  uint32_t         Spare[64];
+
+  // Padding for MMHUB - do not modify this
+  uint32_t     MmHubPadding[8];
+
+} SkuTable_t;
+
+typedef struct {
+  // SECTION: Version
+  uint32_t    Version; //should be unique to each board type
+
+
+  // SECTION: I2C Control
+  I2cControllerConfig_t  I2cControllers[NUM_I2C_CONTROLLERS];
+
+  // SECTION: SVI2 Board Parameters
+  uint8_t      VddGfxVrMapping;   // Use VR_MAPPING* bitfields
+  uint8_t      VddSocVrMapping;   // Use VR_MAPPING* bitfields
+  uint8_t      VddMem0VrMapping;  // Use VR_MAPPING* bitfields
+  uint8_t      VddMem1VrMapping;  // Use VR_MAPPING* bitfields
+
+  uint8_t      GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
+  uint8_t      SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
+  uint8_t      VmempUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
+  uint8_t      VddioUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
+
+  //SECTION SVI3 Board Parameters
+  uint8_t      SlaveAddrMapping[SVI_PLANE_COUNT];
+  uint8_t      VrPsiSupport[SVI_PLANE_COUNT];
+
+  uint8_t      PaddingPsi[SVI_PLANE_COUNT];
+  uint8_t      EnablePsi6[SVI_PLANE_COUNT];       // only applicable in SVI3
+
+  // SECTION: Voltage Regulator Settings
+  SviTelemetryScale_t SviTelemetryScale[SVI_PLANE_COUNT];
+  uint32_t     VoltageTelemetryRatio[SVI_PLANE_COUNT]; // This is used for VDDIO  Svi2 Div Ratio workaround. It has 16 fractional bits (Q16.16)
+
+  uint8_t      DownSlewRateVr[SVI_PLANE_COUNT];
+
+  // SECTION: GPIO Settings
+
+  uint8_t      LedOffGpio;
+  uint8_t      FanOffGpio;
+  uint8_t      GfxVrPowerStageOffGpio;
+
+  uint8_t      AcDcGpio;        // GPIO pin configured for AC/DC switching
+  uint8_t      AcDcPolarity;    // GPIO polarity for AC/DC switching
+  uint8_t      VR0HotGpio;      // GPIO pin configured for VR0 HOT event
+  uint8_t      VR0HotPolarity;  // GPIO polarity for VR0 HOT event
+
+  uint8_t      GthrGpio;        // GPIO pin configured for GTHR Event
+  uint8_t      GthrPolarity;    // replace GPIO polarity for GTHR
+
+  // LED Display Settings
+  uint8_t      LedPin0;         // GPIO number for LedPin[0]
+  uint8_t      LedPin1;         // GPIO number for LedPin[1]
+  uint8_t      LedPin2;         // GPIO number for LedPin[2]
+  uint8_t      LedEnableMask;
+
+  uint8_t      LedPcie;        // GPIO number for PCIE results
+  uint8_t      LedError;       // GPIO number for Error Cases
+
+  // SECTION: Clock Spread Spectrum
+
+  // UCLK Spread Spectrum
+  uint16_t     UclkSpreadPadding;
+  uint16_t     UclkSpreadFreq;      // kHz
+
+  // UCLK Spread Spectrum
+  uint8_t      UclkSpreadPercent[MEM_VENDOR_COUNT];
+
+  // FCLK Spread Spectrum
+  uint8_t      FclkSpreadPadding;
+  uint8_t      FclkSpreadPercent;   // Q4.4
+  uint16_t     FclkSpreadFreq;      // kHz
+
+  // Section: Memory Config
+  uint8_t      DramWidth; // Width of interface to the channel for each DRAM module. See DRAM_BIT_WIDTH_TYPE_e
+  uint8_t      PaddingMem1[3];
+
+  // Section: Total Board Power
+  uint16_t     TotalBoardPower;     //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power
+  uint16_t     BoardPowerPadding;
+
+  // SECTION: UMC feature flags
+  uint8_t      HsrEnabled;
+  uint8_t      VddqOffEnabled;
+  uint8_t      PaddingUmcFlags[2];
+
+  uint32_t    PostVoltageSetBacoDelay; // in microseconds. Amount of time FW will wait after power good is established or PSI0 command is issued
+  uint32_t    BacoEntryDelay; // in milliseconds. Amount of time FW will wait to trigger BACO entry after receiving entry notification from OS
+
+
+  // SECTION: Board Reserved
+  uint32_t     BoardSpare[64];
+
+  // SECTION: Structure Padding
+
+  // Padding for MMHUB - do not modify this
+  uint32_t     MmHubPadding[8];
+} BoardTable_t;
+
+typedef struct {
+  SkuTable_t SkuTable;
+  BoardTable_t BoardTable;
+} PPTable_t;
+
+typedef struct {
+  // Time constant parameters for clock averages in ms
+  uint16_t     GfxclkAverageLpfTau;
+  uint16_t     FclkAverageLpfTau;
+  uint16_t     UclkAverageLpfTau;
+  uint16_t     GfxActivityLpfTau;
+  uint16_t     UclkActivityLpfTau;
+  uint16_t     SocketPowerLpfTau;
+  uint16_t     VcnClkAverageLpfTau;
+  uint16_t     VcnUsageAverageLpfTau;
+} DriverSmuConfig_t;
+
+typedef struct {
+  DriverSmuConfig_t DriverSmuConfig;
+
+  uint32_t     Spare[8];
+  // Padding - ignore
+  uint32_t     MmHubPadding[8]; // SMU internal use
+} DriverSmuConfigExternal_t;
+
+
+typedef struct {
+
+  uint16_t       FreqTableGfx      [NUM_GFXCLK_DPM_LEVELS  ];     // In MHz
+  uint16_t       FreqTableVclk     [NUM_VCLK_DPM_LEVELS    ];     // In MHz
+  uint16_t       FreqTableDclk     [NUM_DCLK_DPM_LEVELS    ];     // In MHz
+  uint16_t       FreqTableSocclk   [NUM_SOCCLK_DPM_LEVELS  ];     // In MHz
+  uint16_t       FreqTableUclk     [NUM_UCLK_DPM_LEVELS    ];     // In MHz
+  uint16_t       FreqTableDispclk  [NUM_DISPCLK_DPM_LEVELS ];     // In MHz
+  uint16_t       FreqTableDppClk   [NUM_DPPCLK_DPM_LEVELS  ];     // In MHz
+  uint16_t       FreqTableDprefclk [NUM_DPREFCLK_DPM_LEVELS];     // In MHz
+  uint16_t       FreqTableDcfclk   [NUM_DCFCLK_DPM_LEVELS  ];     // In MHz
+  uint16_t       FreqTableDtbclk   [NUM_DTBCLK_DPM_LEVELS  ];     // In MHz
+  uint16_t       FreqTableFclk     [NUM_FCLK_DPM_LEVELS    ];     // In MHz
+
+  uint16_t       DcModeMaxFreq     [PPCLK_COUNT            ];     // In MHz
+
+  uint16_t       Padding;
+
+  uint32_t Spare[32];
+
+  // Padding - ignore
+  uint32_t     MmHubPadding[8]; // SMU internal use
+
+} DriverInfoTable_t;
+
+typedef struct {
+  uint32_t CurrClock[PPCLK_COUNT];
+
+  uint16_t AverageGfxclkFrequencyTarget;
+  uint16_t AverageGfxclkFrequencyPreDs;
+  uint16_t AverageGfxclkFrequencyPostDs;
+  uint16_t AverageFclkFrequencyPreDs;
+  uint16_t AverageFclkFrequencyPostDs;
+  uint16_t AverageMemclkFrequencyPreDs  ; // this is scaled to actual memory clock
+  uint16_t AverageMemclkFrequencyPostDs  ; // this is scaled to actual memory clock
+  uint16_t AverageVclk0Frequency  ;
+  uint16_t AverageDclk0Frequency  ;
+  uint16_t AverageVclk1Frequency  ;
+  uint16_t AverageDclk1Frequency  ;
+
+  uint16_t AvgVoltage[SVI_PLANE_COUNT];
+
+  uint16_t AverageGfxActivity    ;
+  uint16_t AverageUclkActivity   ;
+  uint16_t Vcn0ActivityPercentage  ;
+  uint16_t Vcn1ActivityPercentage  ;
+
+  uint32_t EnergyAccumulator;
+  uint16_t AverageSocketPower    ;
+  uint16_t AvgTemperature[TEMP_COUNT];
+
+  uint8_t  PcieRate               ;
+  uint8_t  PcieWidth              ;
+
+  uint8_t  AvgFanPwm;
+  uint8_t  Padding[1];
+  uint16_t AvgFanRpm;
+
+
+  uint8_t ThrottlingPercentage[THROTTLER_COUNT];
+
+  //metrics for D3hot entry/exit and driver ARM msgs
+  uint32_t D3HotEntryCountPerMode[D3HOT_SEQUENCE_COUNT];
+  uint32_t D3HotExitCountPerMode[D3HOT_SEQUENCE_COUNT];
+  uint32_t ArmMsgReceivedCountPerMode[D3HOT_SEQUENCE_COUNT];
+
+  uint16_t ApuSTAPMSmartShiftLimit;
+  uint16_t ApuSTAPMLimit;
+  uint16_t AvgApuSocketPower;
+
+  uint16_t AverageUclkActivity_MAX;
+
+} SmuMetrics_t;
+
+typedef struct {
+  SmuMetrics_t SmuMetrics;
+  uint32_t Spare[32];
+
+  // Padding - ignore
+  uint32_t     MmHubPadding[8]; // SMU internal use
+} SmuMetricsExternal_t;
+
+typedef struct {
+  uint8_t  WmSetting;
+  uint8_t  Flags;
+  uint8_t  Padding[2];
+
+} WatermarkRowGeneric_t;
+
+#define NUM_WM_RANGES 4
+
+typedef enum {
+  WATERMARKS_CLOCK_RANGE = 0,
+  WATERMARKS_DUMMY_PSTATE,
+  WATERMARKS_MALL,
+  WATERMARKS_COUNT,
+} WATERMARKS_FLAGS_e;
+
+typedef struct {
+  // Watermarks
+  WatermarkRowGeneric_t WatermarkRow[NUM_WM_RANGES];
+} Watermarks_t;
+
+typedef struct {
+  Watermarks_t Watermarks;
+  uint32_t  Spare[16];
+
+  uint32_t     MmHubPadding[8]; // SMU internal use
+} WatermarksExternal_t;
+
+typedef struct {
+  uint16_t avgPsmCount[36];
+  uint16_t minPsmCount[36];
+  float    avgPsmVoltage[36];
+  float    minPsmVoltage[36];
+} AvfsDebugTable_t;
+
+typedef struct {
+  AvfsDebugTable_t AvfsDebugTable;
+
+  uint32_t     MmHubPadding[8]; // SMU internal use
+} AvfsDebugTableExternal_t;
+
+
+typedef struct {
+  uint8_t   Gfx_ActiveHystLimit;
+  uint8_t   Gfx_IdleHystLimit;
+  uint8_t   Gfx_FPS;
+  uint8_t   Gfx_MinActiveFreqType;
+  uint8_t   Gfx_BoosterFreqType;
+  uint8_t   PaddingGfx;
+  uint16_t  Gfx_MinActiveFreq;              // MHz
+  uint16_t  Gfx_BoosterFreq;                // MHz
+  uint16_t  Gfx_PD_Data_time_constant;      // Time constant of PD controller in ms
+  uint32_t  Gfx_PD_Data_limit_a;            // Q16
+  uint32_t  Gfx_PD_Data_limit_b;            // Q16
+  uint32_t  Gfx_PD_Data_limit_c;            // Q16
+  uint32_t  Gfx_PD_Data_error_coeff;        // Q16
+  uint32_t  Gfx_PD_Data_error_rate_coeff;   // Q16
+
+  uint8_t   Fclk_ActiveHystLimit;
+  uint8_t   Fclk_IdleHystLimit;
+  uint8_t   Fclk_FPS;
+  uint8_t   Fclk_MinActiveFreqType;
+  uint8_t   Fclk_BoosterFreqType;
+  uint8_t   PaddingFclk;
+  uint16_t  Fclk_MinActiveFreq;              // MHz
+  uint16_t  Fclk_BoosterFreq;                // MHz
+  uint16_t  Fclk_PD_Data_time_constant;      // Time constant of PD controller in ms
+  uint32_t  Fclk_PD_Data_limit_a;            // Q16
+  uint32_t  Fclk_PD_Data_limit_b;            // Q16
+  uint32_t  Fclk_PD_Data_limit_c;            // Q16
+  uint32_t  Fclk_PD_Data_error_coeff;        // Q16
+  uint32_t  Fclk_PD_Data_error_rate_coeff;   // Q16
+
+  uint32_t  Mem_UpThreshold_Limit[NUM_UCLK_DPM_LEVELS];          // Q16
+  uint8_t   Mem_UpHystLimit[NUM_UCLK_DPM_LEVELS];
+  uint8_t   Mem_DownHystLimit[NUM_UCLK_DPM_LEVELS];
+  uint16_t  Mem_Fps;
+  uint8_t   padding[2];
+
+} DpmActivityMonitorCoeffInt_t;
+
+
+typedef struct {
+  DpmActivityMonitorCoeffInt_t DpmActivityMonitorCoeffInt;
+  uint32_t     MmHubPadding[8]; // SMU internal use
+} DpmActivityMonitorCoeffIntExternal_t;
+
+
+
+// Workload bits
+#define WORKLOAD_PPLIB_DEFAULT_BIT        0
+#define WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT 1
+#define WORKLOAD_PPLIB_POWER_SAVING_BIT   2
+#define WORKLOAD_PPLIB_VIDEO_BIT          3
+#define WORKLOAD_PPLIB_VR_BIT             4
+#define WORKLOAD_PPLIB_COMPUTE_BIT        5
+#define WORKLOAD_PPLIB_CUSTOM_BIT         6
+#define WORKLOAD_PPLIB_WINDOW_3D_BIT      7
+#define WORKLOAD_PPLIB_COUNT              8
+
+
+// These defines are used with the following messages:
+// SMC_MSG_TransferTableDram2Smu
+// SMC_MSG_TransferTableSmu2Dram
+
+// Table transfer status
+#define TABLE_TRANSFER_OK         0x0
+#define TABLE_TRANSFER_FAILED     0xFF
+#define TABLE_TRANSFER_PENDING    0xAB
+
+// Table types
+#define TABLE_PPTABLE                 0
+#define TABLE_COMBO_PPTABLE           1
+#define TABLE_WATERMARKS              2
+#define TABLE_AVFS_PSM_DEBUG          3
+#define TABLE_PMSTATUSLOG             4
+#define TABLE_SMU_METRICS             5
+#define TABLE_DRIVER_SMU_CONFIG       6
+#define TABLE_ACTIVITY_MONITOR_COEFF  7
+#define TABLE_OVERDRIVE               8
+#define TABLE_I2C_COMMANDS            9
+#define TABLE_DRIVER_INFO             10
+#define TABLE_ECCINFO                 11
+#define TABLE_COUNT                   12
+
+//IH Interupt ID
+#define IH_INTERRUPT_ID_TO_DRIVER                   0xFE
+#define IH_INTERRUPT_CONTEXT_ID_BACO                0x2
+#define IH_INTERRUPT_CONTEXT_ID_AC                  0x3
+#define IH_INTERRUPT_CONTEXT_ID_DC                  0x4
+#define IH_INTERRUPT_CONTEXT_ID_AUDIO_D0            0x5
+#define IH_INTERRUPT_CONTEXT_ID_AUDIO_D3            0x6
+#define IH_INTERRUPT_CONTEXT_ID_THERMAL_THROTTLING  0x7
+
+#endif
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v13_0_7_ppsmc.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v13_0_7_ppsmc.h
new file mode 100644
index 000000000000..3f2d0a9e4745
--- /dev/null
+++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v13_0_7_ppsmc.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2021 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+#ifndef SMU_V13_0_7_PPSMC_H
+#define SMU_V13_0_7_PPSMC_H
+
+#define PPSMC_VERSION 0x1
+
+// SMU Response Codes:
+#define PPSMC_Result_OK                    0x1
+#define PPSMC_Result_Failed                0xFF
+#define PPSMC_Result_UnknownCmd            0xFE
+#define PPSMC_Result_CmdRejectedPrereq     0xFD
+#define PPSMC_Result_CmdRejectedBusy       0xFC
+
+// Message Definitions:
+// BASIC
+#define PPSMC_MSG_TestMessage                    0x1
+#define PPSMC_MSG_GetSmuVersion                  0x2
+#define PPSMC_MSG_GetDriverIfVersion             0x3
+#define PPSMC_MSG_SetAllowedFeaturesMaskLow      0x4
+#define PPSMC_MSG_SetAllowedFeaturesMaskHigh     0x5
+#define PPSMC_MSG_EnableAllSmuFeatures           0x6
+#define PPSMC_MSG_DisableAllSmuFeatures          0x7
+#define PPSMC_MSG_EnableSmuFeaturesLow           0x8
+#define PPSMC_MSG_EnableSmuFeaturesHigh          0x9
+#define PPSMC_MSG_DisableSmuFeaturesLow          0xA
+#define PPSMC_MSG_DisableSmuFeaturesHigh         0xB
+#define PPSMC_MSG_GetRunningSmuFeaturesLow       0xC
+#define PPSMC_MSG_GetRunningSmuFeaturesHigh      0xD
+#define PPSMC_MSG_SetDriverDramAddrHigh          0xE
+#define PPSMC_MSG_SetDriverDramAddrLow           0xF
+#define PPSMC_MSG_SetToolsDramAddrHigh           0x10
+#define PPSMC_MSG_SetToolsDramAddrLow            0x11
+#define PPSMC_MSG_TransferTableSmu2Dram          0x12
+#define PPSMC_MSG_TransferTableDram2Smu          0x13
+#define PPSMC_MSG_UseDefaultPPTable              0x14
+
+//BACO/BAMACO/BOMACO
+#define PPSMC_MSG_EnterBaco                      0x15
+#define PPSMC_MSG_ExitBaco                       0x16
+#define PPSMC_MSG_ArmD3                          0x17
+#define PPSMC_MSG_BacoAudioD3PME                 0x18
+
+//DPM
+#define PPSMC_MSG_SetSoftMinByFreq               0x19
+#define PPSMC_MSG_SetSoftMaxByFreq               0x1A
+#define PPSMC_MSG_SetHardMinByFreq               0x1B
+#define PPSMC_MSG_SetHardMaxByFreq               0x1C
+#define PPSMC_MSG_GetMinDpmFreq                  0x1D
+#define PPSMC_MSG_GetMaxDpmFreq                  0x1E
+#define PPSMC_MSG_GetDpmFreqByIndex              0x1F
+#define PPSMC_MSG_OverridePcieParameters         0x20
+
+//DramLog Set DramAddr
+#define PPSMC_MSG_DramLogSetDramAddrHigh         0x21
+#define PPSMC_MSG_DramLogSetDramAddrLow          0x22
+#define PPSMC_MSG_DramLogSetDramSize             0x23
+#define PPSMC_MSG_SetWorkloadMask                0x24
+
+#define PPSMC_MSG_GetVoltageByDpm                0x25
+#define PPSMC_MSG_SetVideoFps                    0x26
+#define PPSMC_MSG_GetDcModeMaxDpmFreq            0x27
+
+//Power Gating
+#define PPSMC_MSG_AllowGfxOff                    0x28
+#define PPSMC_MSG_DisallowGfxOff                 0x29
+#define PPSMC_MSG_PowerUpVcn                     0x2A
+#define PPSMC_MSG_PowerDownVcn                   0x2B
+#define PPSMC_MSG_PowerUpJpeg                    0x2C
+#define PPSMC_MSG_PowerDownJpeg                  0x2D
+
+//Resets
+#define PPSMC_MSG_PrepareMp1ForUnload            0x2E
+#define PPSMC_MSG_Mode1Reset                     0x2F
+
+//Set SystemVirtual DramAddrHigh
+#define PPSMC_MSG_SetSystemVirtualDramAddrHigh   0x30
+#define PPSMC_MSG_SetSystemVirtualDramAddrLow    0x31
+//ACDC Power Source
+#define PPSMC_MSG_SetPptLimit                    0x32
+#define PPSMC_MSG_GetPptLimit                    0x33
+#define PPSMC_MSG_ReenableAcDcInterrupt          0x34
+#define PPSMC_MSG_NotifyPowerSource              0x35
+
+//BTC
+#define PPSMC_MSG_RunDcBtc                       0x36
+
+//                                               0x37
+
+//Others
+#define PPSMC_MSG_SetTemperatureInputSelect      0x38
+#define PPSMC_MSG_SetFwDstatesMask               0x39
+#define PPSMC_MSG_SetThrottlerMask               0x3A
+
+#define PPSMC_MSG_SetExternalClientDfCstateAllow 0x3B
+
+#define PPSMC_MSG_SetMGpuFanBoostLimitRpm        0x3C
+
+//STB to dram log
+#define PPSMC_MSG_DumpSTBtoDram                  0x3D
+#define PPSMC_MSG_STBtoDramLogSetDramAddrHigh    0x3E
+#define PPSMC_MSG_STBtoDramLogSetDramAddrLow     0x3F
+#define PPSMC_MSG_STBtoDramLogSetDramSize        0x40
+
+#define PPSMC_MSG_SetGpoAllow                    0x41
+#define PPSMC_MSG_AllowGfxDcs                    0x42
+#define PPSMC_MSG_DisallowGfxDcs                 0x43
+#define PPSMC_MSG_EnableAudioStutterWA           0x44
+#define PPSMC_MSG_PowerUpUmsch                   0x45
+#define PPSMC_MSG_PowerDownUmsch                 0x46
+#define PPSMC_Message_Count                      0x4C
+
+
+#endif
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0_7_pptable.h b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0_7_pptable.h
new file mode 100644
index 000000000000..3f29f4327378
--- /dev/null
+++ b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v13_0_7_pptable.h
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2022 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef SMU_13_0_7_PPTABLE_H
+#define SMU_13_0_7_PPTABLE_H
+
+#define SMU_13_0_7_TABLE_FORMAT_REVISION 15
+
+//// POWERPLAYTABLE::ulPlatformCaps
+#define SMU_13_0_7_PP_PLATFORM_CAP_POWERPLAY 0x1        // This cap indicates whether CCC need to show Powerplay page.
+#define SMU_13_0_7_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 0x2 // This cap indicates whether power source notificaiton is done by SBIOS instead of OS.
+#define SMU_13_0_7_PP_PLATFORM_CAP_HARDWAREDC 0x4       // This cap indicates whether DC mode notificaiton is done by GPIO pin directly.
+#define SMU_13_0_7_PP_PLATFORM_CAP_BACO 0x8             // This cap indicates whether board supports the BACO circuitry.
+#define SMU_13_0_7_PP_PLATFORM_CAP_MACO 0x10            // This cap indicates whether board supports the MACO circuitry.
+#define SMU_13_0_7_PP_PLATFORM_CAP_SHADOWPSTATE 0x20    // This cap indicates whether board supports the Shadow Pstate.
+
+// SMU_13_0_7_PP_THERMALCONTROLLER - Thermal Controller Type
+#define SMU_13_0_7_PP_THERMALCONTROLLER_NONE 0
+#define SMU_13_0_7_PP_THERMALCONTROLLER_NAVI21 28
+
+#define SMU_13_0_7_PP_OVERDRIVE_VERSION 0x81        // OverDrive 8 Table Version 0.2
+#define SMU_13_0_7_PP_POWERSAVINGCLOCK_VERSION 0x01 // Power Saving Clock Table Version 1.00
+
+enum SMU_13_0_7_ODFEATURE_CAP
+{
+    SMU_13_0_7_ODCAP_GFXCLK_LIMITS = 0,
+    SMU_13_0_7_ODCAP_GFXCLK_CURVE,
+    SMU_13_0_7_ODCAP_UCLK_LIMITS,
+    SMU_13_0_7_ODCAP_POWER_LIMIT,
+    SMU_13_0_7_ODCAP_FAN_ACOUSTIC_LIMIT,
+    SMU_13_0_7_ODCAP_FAN_SPEED_MIN,
+    SMU_13_0_7_ODCAP_TEMPERATURE_FAN,
+    SMU_13_0_7_ODCAP_TEMPERATURE_SYSTEM,
+    SMU_13_0_7_ODCAP_MEMORY_TIMING_TUNE,
+    SMU_13_0_7_ODCAP_FAN_ZERO_RPM_CONTROL,
+    SMU_13_0_7_ODCAP_AUTO_UV_ENGINE,
+    SMU_13_0_7_ODCAP_AUTO_OC_ENGINE,
+    SMU_13_0_7_ODCAP_AUTO_OC_MEMORY,
+    SMU_13_0_7_ODCAP_FAN_CURVE,
+    SMU_13_0_7_ODCAP_AUTO_FAN_ACOUSTIC_LIMIT,
+    SMU_13_0_7_ODCAP_POWER_MODE,
+    SMU_13_0_7_ODCAP_COUNT,
+};
+
+enum SMU_13_0_7_ODFEATURE_ID
+{
+    SMU_13_0_7_ODFEATURE_GFXCLK_LIMITS           = 1 << SMU_13_0_7_ODCAP_GFXCLK_LIMITS,           //GFXCLK Limit feature
+    SMU_13_0_7_ODFEATURE_GFXCLK_CURVE            = 1 << SMU_13_0_7_ODCAP_GFXCLK_CURVE,            //GFXCLK Curve feature
+    SMU_13_0_7_ODFEATURE_UCLK_LIMITS             = 1 << SMU_13_0_7_ODCAP_UCLK_LIMITS,             //UCLK Limit feature
+    SMU_13_0_7_ODFEATURE_POWER_LIMIT             = 1 << SMU_13_0_7_ODCAP_POWER_LIMIT,             //Power Limit feature
+    SMU_13_0_7_ODFEATURE_FAN_ACOUSTIC_LIMIT      = 1 << SMU_13_0_7_ODCAP_FAN_ACOUSTIC_LIMIT,      //Fan Acoustic RPM feature
+    SMU_13_0_7_ODFEATURE_FAN_SPEED_MIN           = 1 << SMU_13_0_7_ODCAP_FAN_SPEED_MIN,           //Minimum Fan Speed feature
+    SMU_13_0_7_ODFEATURE_TEMPERATURE_FAN         = 1 << SMU_13_0_7_ODCAP_TEMPERATURE_FAN,         //Fan Target Temperature Limit feature
+    SMU_13_0_7_ODFEATURE_TEMPERATURE_SYSTEM      = 1 << SMU_13_0_7_ODCAP_TEMPERATURE_SYSTEM,      //Operating Temperature Limit feature
+    SMU_13_0_7_ODFEATURE_MEMORY_TIMING_TUNE      = 1 << SMU_13_0_7_ODCAP_MEMORY_TIMING_TUNE,      //AC Timing Tuning feature
+    SMU_13_0_7_ODFEATURE_FAN_ZERO_RPM_CONTROL    = 1 << SMU_13_0_7_ODCAP_FAN_ZERO_RPM_CONTROL,    //Zero RPM feature
+    SMU_13_0_7_ODFEATURE_AUTO_UV_ENGINE          = 1 << SMU_13_0_7_ODCAP_AUTO_UV_ENGINE,          //Auto Under Volt GFXCLK feature
+    SMU_13_0_7_ODFEATURE_AUTO_OC_ENGINE          = 1 << SMU_13_0_7_ODCAP_AUTO_OC_ENGINE,          //Auto Over Clock GFXCLK feature
+    SMU_13_0_7_ODFEATURE_AUTO_OC_MEMORY          = 1 << SMU_13_0_7_ODCAP_AUTO_OC_MEMORY,          //Auto Over Clock MCLK feature
+    SMU_13_0_7_ODFEATURE_FAN_CURVE               = 1 << SMU_13_0_7_ODCAP_FAN_CURVE,               //Fan Curve feature
+    SMU_13_0_7_ODFEATURE_AUTO_FAN_ACOUSTIC_LIMIT = 1 << SMU_13_0_7_ODCAP_AUTO_FAN_ACOUSTIC_LIMIT, //Auto Fan Acoustic RPM feature
+    SMU_13_0_7_ODFEATURE_POWER_MODE              = 1 << SMU_13_0_7_ODCAP_POWER_MODE,              //Optimized GPU Power Mode feature
+    SMU_13_0_7_ODFEATURE_COUNT                   = 16,
+};
+
+#define SMU_13_0_7_MAX_ODFEATURE 32 //Maximum Number of OD Features
+
+enum SMU_13_0_7_ODSETTING_ID
+{
+    SMU_13_0_7_ODSETTING_GFXCLKFMAX = 0,
+    SMU_13_0_7_ODSETTING_GFXCLKFMIN,
+    SMU_13_0_7_ODSETTING_CUSTOM_GFX_VF_CURVE_A,
+    SMU_13_0_7_ODSETTING_CUSTOM_GFX_VF_CURVE_B,
+    SMU_13_0_7_ODSETTING_CUSTOM_GFX_VF_CURVE_C,
+    SMU_13_0_7_ODSETTING_CUSTOM_CURVE_VFT_FMIN,
+    SMU_13_0_7_ODSETTING_UCLKFMIN,
+    SMU_13_0_7_ODSETTING_UCLKFMAX,
+    SMU_13_0_7_ODSETTING_POWERPERCENTAGE,
+    SMU_13_0_7_ODSETTING_FANRPMMIN,
+    SMU_13_0_7_ODSETTING_FANRPMACOUSTICLIMIT,
+    SMU_13_0_7_ODSETTING_FANTARGETTEMPERATURE,
+    SMU_13_0_7_ODSETTING_OPERATINGTEMPMAX,
+    SMU_13_0_7_ODSETTING_ACTIMING,
+    SMU_13_0_7_ODSETTING_FAN_ZERO_RPM_CONTROL,
+    SMU_13_0_7_ODSETTING_AUTOUVENGINE,
+    SMU_13_0_7_ODSETTING_AUTOOCENGINE,
+    SMU_13_0_7_ODSETTING_AUTOOCMEMORY,
+    SMU_13_0_7_ODSETTING_FAN_CURVE_TEMPERATURE_1,
+    SMU_13_0_7_ODSETTING_FAN_CURVE_SPEED_1,
+    SMU_13_0_7_ODSETTING_FAN_CURVE_TEMPERATURE_2,
+    SMU_13_0_7_ODSETTING_FAN_CURVE_SPEED_2,
+    SMU_13_0_7_ODSETTING_FAN_CURVE_TEMPERATURE_3,
+    SMU_13_0_7_ODSETTING_FAN_CURVE_SPEED_3,
+    SMU_13_0_7_ODSETTING_FAN_CURVE_TEMPERATURE_4,
+    SMU_13_0_7_ODSETTING_FAN_CURVE_SPEED_4,
+    SMU_13_0_7_ODSETTING_FAN_CURVE_TEMPERATURE_5,
+    SMU_13_0_7_ODSETTING_FAN_CURVE_SPEED_5,
+    SMU_13_0_7_ODSETTING_AUTO_FAN_ACOUSTIC_LIMIT,
+    SMU_13_0_7_ODSETTING_POWER_MODE,
+    SMU_13_0_7_ODSETTING_COUNT,
+};
+#define SMU_13_0_7_MAX_ODSETTING 64 //Maximum Number of ODSettings
+
+enum SMU_13_0_7_PWRMODE_SETTING
+{
+    SMU_13_0_7_PMSETTING_POWER_LIMIT_QUIET = 0,
+    SMU_13_0_7_PMSETTING_POWER_LIMIT_BALANCE,
+    SMU_13_0_7_PMSETTING_POWER_LIMIT_TURBO,
+    SMU_13_0_7_PMSETTING_POWER_LIMIT_RAGE,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_TEMP_QUIET,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_TEMP_BALANCE,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_TEMP_TURBO,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_TEMP_RAGE,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_TARGET_RPM_QUIET,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_TARGET_RPM_BALANCE,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_TARGET_RPM_TURBO,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_TARGET_RPM_RAGE,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_LIMIT_RPM_QUIET,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_LIMIT_RPM_BALANCE,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_LIMIT_RPM_TURBO,
+    SMU_13_0_7_PMSETTING_ACOUSTIC_LIMIT_RPM_RAGE,
+};
+#define SMU_13_0_7_MAX_PMSETTING 32 //Maximum Number of PowerMode Settings
+
+struct smu_13_0_7_overdrive_table
+{
+    uint8_t revision;                             //Revision = SMU_13_0_7_PP_OVERDRIVE_VERSION
+    uint8_t reserve[3];                           //Zero filled field reserved for future use
+    uint32_t feature_count;                       //Total number of supported features
+    uint32_t setting_count;                       //Total number of supported settings
+    uint8_t cap[SMU_13_0_7_MAX_ODFEATURE];        //OD feature support flags
+    uint32_t max[SMU_13_0_7_MAX_ODSETTING];       //default maximum settings
+    uint32_t min[SMU_13_0_7_MAX_ODSETTING];       //default minimum settings
+    int16_t pm_setting[SMU_13_0_7_MAX_PMSETTING]; //Optimized power mode feature settings
+};
+
+enum SMU_13_0_7_PPCLOCK_ID
+{
+    SMU_13_0_7_PPCLOCK_GFXCLK = 0,
+    SMU_13_0_7_PPCLOCK_SOCCLK,
+    SMU_13_0_7_PPCLOCK_UCLK,
+    SMU_13_0_7_PPCLOCK_FCLK,
+    SMU_13_0_7_PPCLOCK_DCLK_0,
+    SMU_13_0_7_PPCLOCK_VCLK_0,
+    SMU_13_0_7_PPCLOCK_DCLK_1,
+    SMU_13_0_7_PPCLOCK_VCLK_1,
+    SMU_13_0_7_PPCLOCK_DCEFCLK,
+    SMU_13_0_7_PPCLOCK_DISPCLK,
+    SMU_13_0_7_PPCLOCK_PIXCLK,
+    SMU_13_0_7_PPCLOCK_PHYCLK,
+    SMU_13_0_7_PPCLOCK_DTBCLK,
+    SMU_13_0_7_PPCLOCK_COUNT,
+};
+#define SMU_13_0_7_MAX_PPCLOCK 16 //Maximum Number of PP Clocks
+
+struct smu_13_0_7_powerplay_table
+{
+    struct atom_common_table_header header; //For PLUM_BONITO, header.format_revision = 15, header.content_revision = 0
+    uint8_t table_revision;                 //For PLUM_BONITO, table_revision = 2
+    uint8_t padding;
+    uint16_t table_size;                    //Driver portion table size. The offset to smc_pptable including header size
+    uint32_t golden_pp_id;                  //PPGen use only: PP Table ID on the Golden Data Base
+    uint32_t golden_revision;               //PPGen use only: PP Table Revision on the Golden Data Base
+    uint16_t format_id;                     //PPGen use only: PPTable for different ASICs. For PLUM_BONITO this should be 0x80
+    uint32_t platform_caps;                 //POWERPLAYABLE::ulPlatformCaps
+
+    uint8_t thermal_controller_type; //one of SMU_13_0_7_PP_THERMALCONTROLLER
+
+    uint16_t small_power_limit1;
+    uint16_t small_power_limit2;
+    uint16_t boost_power_limit; //For Gemini Board, when the slave adapter is in BACO mode, the master adapter will use this boost power limit instead of the default power limit to boost the power limit.
+    uint16_t software_shutdown_temp;
+
+    uint32_t reserve[45];
+
+    struct smu_13_0_7_overdrive_table overdrive_table;
+    uint8_t padding1;
+    PPTable_t smc_pptable; //PPTable_t in driver_if.h
+} __attribute__((packed));
+
+
+#endif