diff options
author | Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> | 2021-06-25 15:14:56 +1200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2021-07-21 09:47:15 +0200 |
commit | b5fdf5c6e6bee35837e160c00ac89327bdad031b (patch) | |
tree | f8b076f721e628d4c000e76e8a2da78c9e9c653f /drivers | |
parent | 5b01248156bd75303e66985c351dee648c149979 (diff) | |
download | linux-b5fdf5c6e6bee35837e160c00ac89327bdad031b.tar.bz2 |
usb: max-3421: Prevent corruption of freed memory
The MAX-3421 USB driver remembers the state of the USB toggles for a
device/endpoint. To save SPI writes, this was only done when a new
device/endpoint was being used. Unfortunately, if the old device was
removed, this would cause writes to freed memory.
To fix this, a simpler scheme is used. The toggles are read from
hardware when a URB is completed, and the toggles are always written to
hardware when any URB transaction is started. This will cause a few more
SPI transactions, but no causes kernel panics.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/host/max3421-hcd.c | 44 |
1 files changed, 14 insertions, 30 deletions
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index e7a8e0609853..59cc1bc7f12f 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -153,8 +153,6 @@ struct max3421_hcd { */ struct urb *curr_urb; enum scheduling_pass sched_pass; - struct usb_device *loaded_dev; /* dev that's loaded into the chip */ - int loaded_epnum; /* epnum whose toggles are loaded */ int urb_done; /* > 0 -> no errors, < 0: errno */ size_t curr_len; u8 hien; @@ -492,39 +490,17 @@ max3421_set_speed(struct usb_hcd *hcd, struct usb_device *dev) * Caller must NOT hold HCD spinlock. */ static void -max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum, - int force_toggles) +max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum) { - struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); - int old_epnum, same_ep, rcvtog, sndtog; - struct usb_device *old_dev; + int rcvtog, sndtog; u8 hctl; - old_dev = max3421_hcd->loaded_dev; - old_epnum = max3421_hcd->loaded_epnum; - - same_ep = (dev == old_dev && epnum == old_epnum); - if (same_ep && !force_toggles) - return; - - if (old_dev && !same_ep) { - /* save the old end-points toggles: */ - u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); - - rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1; - sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1; - - /* no locking: HCD (i.e., we) own toggles, don't we? */ - usb_settoggle(old_dev, old_epnum, 0, rcvtog); - usb_settoggle(old_dev, old_epnum, 1, sndtog); - } /* setup new endpoint's toggle bits: */ rcvtog = usb_gettoggle(dev, epnum, 0); sndtog = usb_gettoggle(dev, epnum, 1); hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) | BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT)); - max3421_hcd->loaded_epnum = epnum; spi_wr8(hcd, MAX3421_REG_HCTL, hctl); /* @@ -532,7 +508,6 @@ max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum, * address-assignment so it's best to just always load the * address whenever the end-point changed/was forced. */ - max3421_hcd->loaded_dev = dev; spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum); } @@ -667,7 +642,7 @@ max3421_select_and_start_urb(struct usb_hcd *hcd) struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); struct urb *urb, *curr_urb = NULL; struct max3421_ep *max3421_ep; - int epnum, force_toggles = 0; + int epnum; struct usb_host_endpoint *ep; struct list_head *pos; unsigned long flags; @@ -777,7 +752,6 @@ done: usb_settoggle(urb->dev, epnum, 0, 1); usb_settoggle(urb->dev, epnum, 1, 1); max3421_ep->pkt_state = PKT_STATE_SETUP; - force_toggles = 1; } else max3421_ep->pkt_state = PKT_STATE_TRANSFER; } @@ -785,7 +759,7 @@ done: spin_unlock_irqrestore(&max3421_hcd->lock, flags); max3421_ep->last_active = max3421_hcd->frame_number; - max3421_set_address(hcd, urb->dev, epnum, force_toggles); + max3421_set_address(hcd, urb->dev, epnum); max3421_set_speed(hcd, urb->dev); max3421_next_transfer(hcd, 0); return 1; @@ -1379,6 +1353,16 @@ max3421_urb_done(struct usb_hcd *hcd) status = 0; urb = max3421_hcd->curr_urb; if (urb) { + /* save the old end-points toggles: */ + u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); + int rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1; + int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1; + int epnum = usb_endpoint_num(&urb->ep->desc); + + /* no locking: HCD (i.e., we) own toggles, don't we? */ + usb_settoggle(urb->dev, epnum, 0, rcvtog); + usb_settoggle(urb->dev, epnum, 1, sndtog); + max3421_hcd->curr_urb = NULL; spin_lock_irqsave(&max3421_hcd->lock, flags); usb_hcd_unlink_urb_from_ep(hcd, urb); |