summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorGuennadi Liakhovetski <g.liakhovetski@gmx.de>2007-10-16 01:24:02 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-16 09:42:50 -0700
commitb3b708fa2780cd2b5d8266a8f0c3a1cab364d4d2 (patch)
treeaf7c490d02118c59bf17cb0c3e055e149f38f147 /drivers
parentaa5346a2126ea65e8ef04eebea0f2481f701bdb8 (diff)
downloadlinux-b3b708fa2780cd2b5d8266a8f0c3a1cab364d4d2.tar.bz2
wake up from a serial port
Enable wakeup from serial ports, make it run-time configurable over sysfs, e.g., echo enabled > /sys/devices/platform/serial8250.0/tty/ttyS0/power/wakeup Requires # CONFIG_SYSFS_DEPRECATED is not set Following suggestions from Alan and Russell moved the may_wake_up checks to serial_core.c. This time actually tested - it does even work. Could someone, please, verify, that put_device after device_find_child is correct? Also would be nice to test with a Natsemi UART, that can wake up the system, if such systems exist. For this you just have to apply the patch below, issue the above "echo" command to one of your Natsemi port, suspend and resume your system, and verify that your Natsemi port still works. If you are actually capable of waking up the system from that port, would be nice to test that as well. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/serial/serial_core.c40
1 files changed, 39 insertions, 1 deletions
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index a3bd3a3f41f3..68aa4da01865 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1938,9 +1938,24 @@ static void uart_change_pm(struct uart_state *state, int pm_state)
}
}
+struct uart_match {
+ struct uart_port *port;
+ struct uart_driver *driver;
+};
+
+static int serial_match_port(struct device *dev, void *data)
+{
+ struct uart_match *match = data;
+ dev_t devt = MKDEV(match->driver->major, match->driver->minor) + match->port->line;
+
+ return dev->devt == devt; /* Actually, only one tty per port */
+}
+
int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
{
struct uart_state *state = drv->state + port->line;
+ struct device *tty_dev;
+ struct uart_match match = {port, drv};
mutex_lock(&state->mutex);
@@ -1951,6 +1966,15 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
}
#endif
+ tty_dev = device_find_child(port->dev, &match, serial_match_port);
+ if (device_may_wakeup(tty_dev)) {
+ enable_irq_wake(port->irq);
+ put_device(tty_dev);
+ mutex_unlock(&state->mutex);
+ return 0;
+ }
+ port->suspended = 1;
+
if (state->info && state->info->flags & UIF_INITIALIZED) {
const struct uart_ops *ops = port->ops;
@@ -1999,6 +2023,13 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
}
#endif
+ if (!port->suspended) {
+ disable_irq_wake(port->irq);
+ mutex_unlock(&state->mutex);
+ return 0;
+ }
+ port->suspended = 0;
+
uart_change_pm(state, 0);
/*
@@ -2278,6 +2309,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
{
struct uart_state *state;
int ret = 0;
+ struct device *tty_dev;
BUG_ON(in_interrupt());
@@ -2314,7 +2346,13 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
* Register the port whether it's detected or not. This allows
* setserial to be used to alter this ports parameters.
*/
- tty_register_device(drv->tty_driver, port->line, port->dev);
+ tty_dev = tty_register_device(drv->tty_driver, port->line, port->dev);
+ if (likely(!IS_ERR(tty_dev))) {
+ device_can_wakeup(tty_dev) = 1;
+ device_set_wakeup_enable(tty_dev, 0);
+ } else
+ printk(KERN_ERR "Cannot register tty device on line %d\n",
+ port->line);
/*
* Ensure UPF_DEAD is not set.