diff options
| author | Peter Hurley <peter@hurleysoftware.com> | 2015-01-25 14:44:52 -0500 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-02-02 10:11:28 -0800 |
| commit | 9719acce37803d179fc94884c8d50b883fc8186e (patch) | |
| tree | 6733045f07039bd64f197917505aaef6b1b827f6 /drivers | |
| parent | 391f93f2ec9f857c83bdd21a14dcf7e699f38579 (diff) | |
| download | linux-9719acce37803d179fc94884c8d50b883fc8186e.tar.bz2 | |
serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling
Commit 88838d3112702 ("serial: omap_8250: Fix RTS handling") fixed
RTS pin control when in autoRTS mode.
New support added in "serial: core: Rework hw-assisted flow control support"
enables a much simpler approach; rather than masking out autoRTS
whenever writing the EFR register, use the UPSTAT_* mode to determine if
autoRTS should be enabled when raising RTS (in omap8250_set_mctrl()).
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 16 |
1 files changed, 7 insertions, 9 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 6e4ff7148ead..fe6d2e51da09 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -120,10 +120,11 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) */ lcr = serial_in(up, UART_LCR); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - if (mctrl & TIOCM_RTS) - serial_out(up, UART_EFR, priv->efr); + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + priv->efr |= UART_EFR_RTS; else - serial_out(up, UART_EFR, priv->efr & ~UART_EFR_RTS); + priv->efr &= ~UART_EFR_RTS; + serial_out(up, UART_EFR, priv->efr); serial_out(up, UART_LCR, lcr); } @@ -272,10 +273,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_dl_write(up, priv->quot); - if (up->port.mctrl & TIOCM_RTS) - serial_out(up, UART_EFR, priv->efr); - else - serial_out(up, UART_EFR, priv->efr & ~UART_EFR_RTS); + serial_out(up, UART_EFR, priv->efr); /* Configure flow control */ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -424,9 +422,9 @@ static void omap_8250_set_termios(struct uart_port *port, up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { - /* Enable AUTORTS and AUTOCTS */ + /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; - priv->efr |= UART_EFR_CTS | UART_EFR_RTS; + priv->efr |= UART_EFR_CTS; } else if (up->port.flags & UPF_SOFT_FLOW) { /* * IXON Flag: |