diff options
author | Aleksa Savic <savicaleksa83@gmail.com> | 2022-04-04 15:42:11 +0200 |
---|---|---|
committer | Guenter Roeck <linux@roeck-us.net> | 2022-05-17 05:52:59 -0700 |
commit | 752b927951eaa6297bffc12efe603df10496566e (patch) | |
tree | 763e01a96624b7d0b9d5f2a7ba21fc729afe54b9 /drivers | |
parent | c0c45238fcf44b05c86f2f7d1dda136df7a83ff9 (diff) | |
download | linux-752b927951eaa6297bffc12efe603df10496566e.tar.bz2 |
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Octo
Extend aquacomputer_d5next driver to expose hardware temperature sensors
and fans of the Aquacomputer Octo fan controller, which communicates
through a proprietary USB HID protocol.
Four temperature sensors and eight PWM controllable fans are available.
Additionally, serial number, firmware version and power-on count are
exposed through debugfs.
This driver has been tested on x86_64.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220404134212.9690-1-savicaleksa83@gmail.com
[groeck: Add missing "select CRC16"]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/hwmon/Kconfig | 8 | ||||
-rw-r--r-- | drivers/hwmon/aquacomputer_d5next.c | 433 |
2 files changed, 389 insertions, 52 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index f2b038fa3b84..d35d74ef6497 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -256,11 +256,13 @@ config SENSORS_AHT10 will be called aht10. config SENSORS_AQUACOMPUTER_D5NEXT - tristate "Aquacomputer D5 Next watercooling pump" + tristate "Aquacomputer D5 Next, Octo and Farbwerk 360" depends on USB_HID + select CRC16 help - If you say yes here you get support for the Aquacomputer D5 Next - watercooling pump sensors. + If you say yes here you get support for sensors and fans of + the Aquacomputer D5 Next watercooling pump, Octo fan + controller and Farbwerk 360 RGB controller, where available. This driver can also be built as a module. If so, the module will be called aquacomputer_d5next. diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c index 525809cf7c95..a464473bc981 100644 --- a/drivers/hwmon/aquacomputer_d5next.c +++ b/drivers/hwmon/aquacomputer_d5next.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk 360) + * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk 360, Octo) * * Aquacomputer devices send HID reports (with ID 0x01) every second to report * sensor values. @@ -8,23 +8,27 @@ * Copyright 2021 Aleksa Savic <savicaleksa83@gmail.com> */ +#include <linux/crc16.h> #include <linux/debugfs.h> #include <linux/hid.h> #include <linux/hwmon.h> #include <linux/jiffies.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/seq_file.h> #include <asm/unaligned.h> #define USB_VENDOR_ID_AQUACOMPUTER 0x0c70 #define USB_PRODUCT_ID_D5NEXT 0xf00e #define USB_PRODUCT_ID_FARBWERK360 0xf010 +#define USB_PRODUCT_ID_OCTO 0xf011 -enum kinds { d5next, farbwerk360 }; +enum kinds { d5next, farbwerk360, octo }; static const char *const aqc_device_names[] = { [d5next] = "d5next", - [farbwerk360] = "farbwerk360" + [farbwerk360] = "farbwerk360", + [octo] = "octo" }; #define DRIVER_NAME "aquacomputer_d5next" @@ -35,6 +39,18 @@ static const char *const aqc_device_names[] = { #define SERIAL_SECOND_PART 5 #define FIRMWARE_VERSION 13 +#define CTRL_REPORT_ID 0x03 + +/* The HID report that the official software always sends + * after writing values, currently same for all devices + */ +#define SECONDARY_CTRL_REPORT_ID 0x02 +#define SECONDARY_CTRL_REPORT_SIZE 0x0B + +static u8 secondary_ctrl_report[] = { + 0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x34, 0xC6 +}; + /* Register offsets for the D5 Next pump */ #define D5NEXT_POWER_CYCLES 24 @@ -55,12 +71,38 @@ static const char *const aqc_device_names[] = { /* Register offsets for the Farbwerk 360 RGB controller */ #define FARBWERK360_NUM_SENSORS 4 -#define FARBWERK360_SENSOR_START 0x32 +#define FARBWERK360_SENSOR_START 0x32 #define FARBWERK360_SENSOR_SIZE 0x02 #define FARBWERK360_SENSOR_DISCONNECTED 0x7FFF +/* Register offsets for the Octo fan controller */ +#define OCTO_POWER_CYCLES 0x18 +#define OCTO_NUM_FANS 8 +#define OCTO_FAN_PERCENT_OFFSET 0x00 +#define OCTO_FAN_VOLTAGE_OFFSET 0x02 +#define OCTO_FAN_CURRENT_OFFSET 0x04 +#define OCTO_FAN_POWER_OFFSET 0x06 +#define OCTO_FAN_SPEED_OFFSET 0x08 + +static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 }; + +#define OCTO_NUM_SENSORS 4 +#define OCTO_SENSOR_START 0x3D +#define OCTO_SENSOR_SIZE 0x02 +#define OCTO_SENSOR_DISCONNECTED 0x7FFF + +#define OCTO_CTRL_REPORT_SIZE 0x65F +#define OCTO_CTRL_REPORT_CHECKSUM_OFFSET 0x65D +#define OCTO_CTRL_REPORT_CHECKSUM_START 0x01 +#define OCTO_CTRL_REPORT_CHECKSUM_LENGTH 0x65C + +/* Fan speed registers in Octo control report (from 0-100%) */ +static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0x259, 0x2AE }; + /* Labels for D5 Next */ -#define L_D5NEXT_COOLANT_TEMP "Coolant temp" +static const char *const label_d5next_temp[] = { + "Coolant temp" +}; static const char *const label_d5next_speeds[] = { "Pump speed", @@ -83,7 +125,7 @@ static const char *const label_d5next_current[] = { "Fan current" }; -/* Labels for Farbwerk 360 temperature sensors */ +/* Labels for Farbwerk 360 and Octo temperature sensors */ static const char *const label_temp_sensors[] = { "Sensor 1", "Sensor 2", @@ -91,32 +133,182 @@ static const char *const label_temp_sensors[] = { "Sensor 4" }; +/* Labels for Octo */ +static const char *const label_fan_speed[] = { + "Fan 1 speed", + "Fan 2 speed", + "Fan 3 speed", + "Fan 4 speed", + "Fan 5 speed", + "Fan 6 speed", + "Fan 7 speed", + "Fan 8 speed" +}; + +static const char *const label_fan_power[] = { + "Fan 1 power", + "Fan 2 power", + "Fan 3 power", + "Fan 4 power", + "Fan 5 power", + "Fan 6 power", + "Fan 7 power", + "Fan 8 power" +}; + +static const char *const label_fan_voltage[] = { + "Fan 1 voltage", + "Fan 2 voltage", + "Fan 3 voltage", + "Fan 4 voltage", + "Fan 5 voltage", + "Fan 6 voltage", + "Fan 7 voltage", + "Fan 8 voltage" +}; + +static const char *const label_fan_current[] = { + "Fan 1 current", + "Fan 2 current", + "Fan 3 current", + "Fan 4 current", + "Fan 5 current", + "Fan 6 current", + "Fan 7 current", + "Fan 8 current" +}; + struct aqc_data { struct hid_device *hdev; struct device *hwmon_dev; struct dentry *debugfs; + struct mutex mutex; /* Used for locking access when reading and writing PWM values */ enum kinds kind; const char *name; + int buffer_size; + u8 *buffer; + int checksum_start; + int checksum_length; + int checksum_offset; + /* General info, same across all devices */ u32 serial_number[2]; u16 firmware_version; - /* D5 Next specific - how many times the device was powered on */ + /* How many times the device was powered on */ u32 power_cycles; /* Sensor values */ s32 temp_input[4]; - u16 speed_input[2]; - u32 power_input[2]; - u16 voltage_input[3]; - u16 current_input[2]; + u16 speed_input[8]; + u32 power_input[8]; + u16 voltage_input[8]; + u16 current_input[8]; + + /* Label values */ + const char *const *temp_label; + const char *const *speed_label; + const char *const *power_label; + const char *const *voltage_label; + const char *const *current_label; unsigned long updated; }; -static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, - int channel) +/* Converts from centi-percent */ +static int aqc_percent_to_pwm(u16 val) +{ + return DIV_ROUND_CLOSEST(val * 255, 100 * 100); +} + +/* Converts to centi-percent */ +static int aqc_pwm_to_percent(long val) +{ + if (val < 0 || val > 255) + return -EINVAL; + + return DIV_ROUND_CLOSEST(val * 100 * 100, 255); +} + +/* Expects the mutex to be locked */ +static int aqc_get_ctrl_data(struct aqc_data *priv) +{ + int ret; + + memset(priv->buffer, 0x00, priv->buffer_size); + ret = hid_hw_raw_request(priv->hdev, CTRL_REPORT_ID, priv->buffer, priv->buffer_size, + HID_FEATURE_REPORT, HID_REQ_GET_REPORT); + if (ret < 0) + ret = -ENODATA; + + return ret; +} + +/* Expects the mutex to be locked */ +static int aqc_send_ctrl_data(struct aqc_data *priv) +{ + int ret; + u16 checksum; + + /* Init and xorout value for CRC-16/USB is 0xffff */ + checksum = crc16(0xffff, priv->buffer + priv->checksum_start, priv->checksum_length); + checksum ^= 0xffff; + + /* Place the new checksum at the end of the report */ + put_unaligned_be16(checksum, priv->buffer + priv->checksum_offset); + + /* Send the patched up report back to the device */ + ret = hid_hw_raw_request(priv->hdev, CTRL_REPORT_ID, priv->buffer, priv->buffer_size, + HID_FEATURE_REPORT, HID_REQ_SET_REPORT); + if (ret < 0) + return ret; + + /* The official software sends this report after every change, so do it here as well */ + ret = hid_hw_raw_request(priv->hdev, SECONDARY_CTRL_REPORT_ID, secondary_ctrl_report, + SECONDARY_CTRL_REPORT_SIZE, HID_FEATURE_REPORT, + HID_REQ_SET_REPORT); + return ret; +} + +/* Refreshes the control buffer and returns value at offset */ +static int aqc_get_ctrl_val(struct aqc_data *priv, int offset) +{ + int ret; + + mutex_lock(&priv->mutex); + + ret = aqc_get_ctrl_data(priv); + if (ret < 0) + goto unlock_and_return; + + ret = get_unaligned_be16(priv->buffer + offset); + +unlock_and_return: + mutex_unlock(&priv->mutex); + return ret; +} + +static int aqc_set_ctrl_val(struct aqc_data *priv, int offset, long val) +{ + int ret; + + mutex_lock(&priv->mutex); + + ret = aqc_get_ctrl_data(priv); + if (ret < 0) + goto unlock_and_return; + + put_unaligned_be16((u16)val, priv->buffer + offset); + + ret = aqc_send_ctrl_data(priv); + +unlock_and_return: + mutex_unlock(&priv->mutex); + return ret; +} + +static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, int channel) { const struct aqc_data *priv = data; @@ -128,17 +320,47 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3 return 0444; break; case farbwerk360: + case octo: return 0444; default: break; } break; + case hwmon_pwm: + switch (priv->kind) { + case octo: + switch (attr) { + case hwmon_pwm_input: + return 0644; + default: + break; + } + break; + default: + break; + } + break; case hwmon_fan: case hwmon_power: - case hwmon_in: case hwmon_curr: switch (priv->kind) { case d5next: + if (channel < 2) + return 0444; + break; + case octo: + return 0444; + default: + break; + } + break; + case hwmon_in: + switch (priv->kind) { + case d5next: + if (channel < 3) + return 0444; + break; + case octo: return 0444; default: break; @@ -154,6 +376,7 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3 static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) { + int ret; struct aqc_data *priv = dev_get_drvdata(dev); if (time_after(jiffies, priv->updated + STATUS_UPDATE_INTERVAL)) @@ -172,6 +395,19 @@ static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, case hwmon_power: *val = priv->power_input[channel]; break; + case hwmon_pwm: + switch (priv->kind) { + case octo: + ret = aqc_get_ctrl_val(priv, octo_ctrl_fan_offsets[channel]); + if (ret < 0) + return ret; + + *val = aqc_percent_to_pwm(ret); + break; + default: + break; + } + break; case hwmon_in: *val = priv->voltage_input[channel]; break; @@ -192,48 +428,51 @@ static int aqc_read_string(struct device *dev, enum hwmon_sensor_types type, u32 switch (type) { case hwmon_temp: - switch (priv->kind) { - case d5next: - *str = L_D5NEXT_COOLANT_TEMP; - break; - case farbwerk360: - *str = label_temp_sensors[channel]; - break; - default: - break; - } + *str = priv->temp_label[channel]; break; case hwmon_fan: - switch (priv->kind) { - case d5next: - *str = label_d5next_speeds[channel]; - break; - default: - break; - } + *str = priv->speed_label[channel]; break; case hwmon_power: - switch (priv->kind) { - case d5next: - *str = label_d5next_power[channel]; - break; - default: - break; - } + *str = priv->power_label[channel]; break; case hwmon_in: - switch (priv->kind) { - case d5next: - *str = label_d5next_voltages[channel]; - break; - default: - break; - } + *str = priv->voltage_label[channel]; break; case hwmon_curr: - switch (priv->kind) { - case d5next: - *str = label_d5next_current[channel]; + *str = priv->current_label[channel]; + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int aqc_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, + long val) +{ + int ret, pwm_value; + struct aqc_data *priv = dev_get_drvdata(dev); + + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + switch (priv->kind) { + case octo: + pwm_value = aqc_pwm_to_percent(val); + if (pwm_value < 0) + return pwm_value; + + ret = aqc_set_ctrl_val(priv, octo_ctrl_fan_offsets[channel], + pwm_value); + if (ret < 0) + return ret; + break; + default: + break; + } break; default: break; @@ -250,6 +489,7 @@ static const struct hwmon_ops aqc_hwmon_ops = { .is_visible = aqc_is_visible, .read = aqc_read, .read_string = aqc_read_string, + .write = aqc_write }; static const struct hwmon_channel_info *aqc_info[] = { @@ -260,16 +500,48 @@ static const struct hwmon_channel_info *aqc_info[] = { HWMON_T_INPUT | HWMON_T_LABEL), HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, HWMON_F_INPUT | HWMON_F_LABEL), HWMON_CHANNEL_INFO(power, HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, HWMON_P_INPUT | HWMON_P_LABEL), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT), HWMON_CHANNEL_INFO(in, HWMON_I_INPUT | HWMON_I_LABEL, HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, HWMON_I_INPUT | HWMON_I_LABEL), HWMON_CHANNEL_INFO(curr, HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, HWMON_C_INPUT | HWMON_C_LABEL), NULL }; @@ -326,6 +598,35 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 priv->temp_input[i] = sensor_value * 10; } break; + case octo: + priv->power_cycles = get_unaligned_be32(data + OCTO_POWER_CYCLES); + + /* Fan speed and related readings */ + for (i = 0; i < OCTO_NUM_FANS; i++) { + priv->speed_input[i] = + get_unaligned_be16(data + octo_sensor_fan_offsets[i] + + OCTO_FAN_SPEED_OFFSET); + priv->power_input[i] = + get_unaligned_be16(data + octo_sensor_fan_offsets[i] + + OCTO_FAN_POWER_OFFSET) * 10000; + priv->voltage_input[i] = + get_unaligned_be16(data + octo_sensor_fan_offsets[i] + + OCTO_FAN_VOLTAGE_OFFSET) * 10; + priv->current_input[i] = + get_unaligned_be16(data + octo_sensor_fan_offsets[i] + + OCTO_FAN_CURRENT_OFFSET); + } + + /* Temperature sensor readings */ + for (i = 0; i < OCTO_NUM_SENSORS; i++) { + sensor_value = get_unaligned_be16(data + OCTO_SENSOR_START + + i * OCTO_SENSOR_SIZE); + if (sensor_value == OCTO_SENSOR_DISCONNECTED) + priv->temp_input[i] = -ENODATA; + else + priv->temp_input[i] = sensor_value * 10; + } + break; default: break; } @@ -378,8 +679,14 @@ static void aqc_debugfs_init(struct aqc_data *priv) debugfs_create_file("serial_number", 0444, priv->debugfs, priv, &serial_number_fops); debugfs_create_file("firmware_version", 0444, priv->debugfs, priv, &firmware_version_fops); - if (priv->kind == d5next) + switch (priv->kind) { + case d5next: + case octo: debugfs_create_file("power_cycles", 0444, priv->debugfs, priv, &power_cycles_fops); + break; + default: + break; + } } #else @@ -419,9 +726,30 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) switch (hdev->product) { case USB_PRODUCT_ID_D5NEXT: priv->kind = d5next; + + priv->temp_label = label_d5next_temp; + priv->speed_label = label_d5next_speeds; + priv->power_label = label_d5next_power; + priv->voltage_label = label_d5next_voltages; + priv->current_label = label_d5next_current; break; case USB_PRODUCT_ID_FARBWERK360: priv->kind = farbwerk360; + + priv->temp_label = label_temp_sensors; + break; + case USB_PRODUCT_ID_OCTO: + priv->kind = octo; + priv->buffer_size = OCTO_CTRL_REPORT_SIZE; + priv->checksum_start = OCTO_CTRL_REPORT_CHECKSUM_START; + priv->checksum_length = OCTO_CTRL_REPORT_CHECKSUM_LENGTH; + priv->checksum_offset = OCTO_CTRL_REPORT_CHECKSUM_OFFSET; + + priv->temp_label = label_temp_sensors; + priv->speed_label = label_fan_speed; + priv->power_label = label_fan_power; + priv->voltage_label = label_fan_voltage; + priv->current_label = label_fan_current; break; default: break; @@ -429,6 +757,12 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->name = aqc_device_names[priv->kind]; + priv->buffer = devm_kzalloc(&hdev->dev, priv->buffer_size, GFP_KERNEL); + if (!priv->buffer) + return -ENOMEM; + + mutex_init(&priv->mutex); + priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, priv->name, priv, &aqc_chip_info, NULL); @@ -462,6 +796,7 @@ static void aqc_remove(struct hid_device *hdev) static const struct hid_device_id aqc_table[] = { { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_D5NEXT) }, { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) }, + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) }, { } }; |