Merge branch 'upstream-fixes'

80 files changed, 537 insertions, 366 deletions

diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index 14f6a6201da3..05983a312d50 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -555,7 +555,7 @@ fore200e_pca_reset(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_pca_map(struct fore200e* fore200e)
 {
     DPRINTK(2, "device %s being mapped in memory\n", fore200e->name);
@@ -589,7 +589,7 @@ fore200e_pca_unmap(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_pca_configure(struct fore200e* fore200e)
 {
     struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev;
@@ -2125,7 +2125,7 @@ fore200e_change_qos(struct atm_vcc* vcc,struct atm_qos* qos, int flags)
 }
     
 
-static int __init
+static int __devinit
 fore200e_irq_request(struct fore200e* fore200e)
 {
     if (request_irq(fore200e->irq, fore200e_interrupt, SA_SHIRQ, fore200e->name, fore200e->atm_dev) < 0) {
@@ -2148,7 +2148,7 @@ fore200e_irq_request(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_get_esi(struct fore200e* fore200e)
 {
     struct prom_data* prom = fore200e_kmalloc(sizeof(struct prom_data), GFP_KERNEL | GFP_DMA);
@@ -2180,7 +2180,7 @@ fore200e_get_esi(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_alloc_rx_buf(struct fore200e* fore200e)
 {
     int scheme, magn, nbr, size, i;
@@ -2245,7 +2245,7 @@ fore200e_alloc_rx_buf(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_bs_queue(struct fore200e* fore200e)
 {
     int scheme, magn, i;
@@ -2308,7 +2308,7 @@ fore200e_init_bs_queue(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_rx_queue(struct fore200e* fore200e)
 {
     struct host_rxq*     rxq =  &fore200e->host_rxq;
@@ -2368,7 +2368,7 @@ fore200e_init_rx_queue(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_tx_queue(struct fore200e* fore200e)
 {
     struct host_txq*     txq =  &fore200e->host_txq;
@@ -2431,7 +2431,7 @@ fore200e_init_tx_queue(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_cmd_queue(struct fore200e* fore200e)
 {
     struct host_cmdq*     cmdq =  &fore200e->host_cmdq;
@@ -2487,7 +2487,7 @@ fore200e_param_bs_queue(struct fore200e* fore200e,
 }
 
 
-static int __init
+static int __devinit
 fore200e_initialize(struct fore200e* fore200e)
 {
     struct cp_queues __iomem * cpq;
@@ -2539,7 +2539,7 @@ fore200e_initialize(struct fore200e* fore200e)
 }
 
 
-static void __init
+static void __devinit
 fore200e_monitor_putc(struct fore200e* fore200e, char c)
 {
     struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
@@ -2551,7 +2551,7 @@ fore200e_monitor_putc(struct fore200e* fore200e, char c)
 }
 
 
-static int __init
+static int __devinit
 fore200e_monitor_getc(struct fore200e* fore200e)
 {
     struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
@@ -2576,7 +2576,7 @@ fore200e_monitor_getc(struct fore200e* fore200e)
 }
 
 
-static void __init
+static void __devinit
 fore200e_monitor_puts(struct fore200e* fore200e, char* str)
 {
     while (*str) {
@@ -2591,7 +2591,7 @@ fore200e_monitor_puts(struct fore200e* fore200e, char* str)
 }
 
 
-static int __init
+static int __devinit
 fore200e_start_fw(struct fore200e* fore200e)
 {
     int               ok;
@@ -2622,7 +2622,7 @@ fore200e_start_fw(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_load_fw(struct fore200e* fore200e)
 {
     u32* fw_data = (u32*) fore200e->bus->fw_data;
@@ -2648,7 +2648,7 @@ fore200e_load_fw(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_register(struct fore200e* fore200e)
 {
     struct atm_dev* atm_dev;
@@ -2675,7 +2675,7 @@ fore200e_register(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init(struct fore200e* fore200e)
 {
     if (fore200e_register(fore200e) < 0)
@@ -2721,7 +2721,7 @@ fore200e_init(struct fore200e* fore200e)
 	return -EBUSY;
 
     fore200e_supply(fore200e);
-    
+
     /* all done, board initialization is now complete */
     fore200e->state = FORE200E_STATE_COMPLETE;
     return 0;
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 6ede1f352c29..37b8cda3e8bc 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -41,6 +41,7 @@
 #include <linux/timer.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/random.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include "DAC960.h"
@@ -3463,7 +3464,7 @@ static inline boolean DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
 		Command->SegmentCount, Command->DmaDirection);
 
 	 if (!end_that_request_first(Request, UpToDate, Command->BlockCount)) {
-
+		add_disk_randomness(Request->rq_disk);
  	 	end_that_request_last(Request, UpToDate);
 
 		if (Command->Completion) {
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index c92378121b4c..1b05fa688996 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -675,7 +675,7 @@ static int __init mmtimer_init(void)
 	cnodeid_t node, maxn = -1;
 
 	if (!ia64_platform_is("sn2"))
-		return -1;
+		return 0;
 
 	/*
 	 * Sanity check the cycles/sec variable
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 18a455651121..52f3eb45d2b9 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -6,17 +6,29 @@
 # $Id: Kconfig,v 1.4.2.7 2005/07/08 22:05:38 dsp_llnl Exp $
 #
 
-menu 'EDAC - error detection and reporting (RAS)'
+menu 'EDAC - error detection and reporting (RAS) (EXPERIMENTAL)'
 
 config EDAC
-	tristate "EDAC core system error reporting"
-	depends on X86
+	tristate "EDAC core system error reporting (EXPERIMENTAL)"
+	depends on X86 && EXPERIMENTAL
 	help
 	  EDAC is designed to report errors in the core system.
 	  These are low-level errors that are reported in the CPU or
 	  supporting chipset: memory errors, cache errors, PCI errors,
 	  thermal throttling, etc..  If unsure, select 'Y'.
 
+	  If this code is reporting problems on your system, please
+	  see the EDAC project web pages for more information at:
+
+	  <http://bluesmoke.sourceforge.net/>
+
+	  and:
+
+	  <http://buttersideup.com/edacwiki>
+
+	  There is also a mailing list for the EDAC project, which can
+	  be found via the sourceforge page.
+
 
 comment "Reporting subsystems"
 	depends on EDAC
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index b10ee4698b1d..262e44544dc8 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -132,11 +132,13 @@ static struct kobject edac_pci_kobj;
  * /sys/devices/system/edac/mc;
  * 	data structures and methods
  */
+#if 0
 static ssize_t memctrl_string_show(void *ptr, char *buffer)
 {
 	char *value = (char*) ptr;
 	return sprintf(buffer, "%s\n", value);
 }
+#endif
 
 static ssize_t memctrl_int_show(void *ptr, char *buffer)
 {
@@ -207,7 +209,9 @@ struct memctrl_dev_attribute attr_##_name = {			\
 };
 
 /* cwrow<id> attribute f*/
+#if 0
 MEMCTRL_STRING_ATTR(mc_version,EDAC_MC_VERSION,S_IRUGO,memctrl_string_show,NULL);
+#endif
 
 /* csrow<id> control files */
 MEMCTRL_ATTR(panic_on_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
@@ -222,7 +226,6 @@ static struct memctrl_dev_attribute *memctrl_attr[] = {
 	&attr_log_ue,
 	&attr_log_ce,
 	&attr_poll_msec,
-	&attr_mc_version,
 	NULL,
 };
 
@@ -309,6 +312,8 @@ struct list_control {
 	int *count;
 };
 
+
+#if 0
 /* Output the list as:  vendor_id:device:id<,vendor_id:device_id> */
 static ssize_t edac_pci_list_string_show(void *ptr, char *buffer)
 {
@@ -430,6 +435,7 @@ static ssize_t edac_pci_list_string_store(void *ptr, const char *buffer,
 	return count;
 }
 
+#endif
 static ssize_t edac_pci_int_show(void *ptr, char *buffer)
 {
 	int *value = ptr;
@@ -498,6 +504,7 @@ struct edac_pci_dev_attribute edac_pci_attr_##_name = {		\
 	.store  = _store,					\
 };
 
+#if 0
 static struct list_control pci_whitelist_control = {
 	.list = pci_whitelist,
 	.count = &pci_whitelist_count
@@ -520,6 +527,7 @@ EDAC_PCI_STRING_ATTR(pci_parity_blacklist,
 	S_IRUGO|S_IWUSR,
 	edac_pci_list_string_show,
 	edac_pci_list_string_store);
+#endif
 
 /* PCI Parity control files */
 EDAC_PCI_ATTR(check_pci_parity,S_IRUGO|S_IWUSR,edac_pci_int_show,edac_pci_int_store);
@@ -531,8 +539,6 @@ static struct edac_pci_dev_attribute *edac_pci_attr[] = {
 	&edac_pci_attr_check_pci_parity,
 	&edac_pci_attr_panic_on_pci_parity,
 	&edac_pci_attr_pci_parity_count,
-	&edac_pci_attr_pci_parity_whitelist,
-	&edac_pci_attr_pci_parity_blacklist,
 	NULL,
 };
 
diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c
index 8ed6ddbb9c5d..4652512f7d1a 100644
--- a/drivers/firmware/dcdbas.c
+++ b/drivers/firmware/dcdbas.c
@@ -39,7 +39,7 @@
 #include "dcdbas.h"
 
 #define DRIVER_NAME		"dcdbas"
-#define DRIVER_VERSION		"5.6.0-1"
+#define DRIVER_VERSION		"5.6.0-2"
 #define DRIVER_DESCRIPTION	"Dell Systems Management Base Driver"
 
 static struct platform_device *dcdbas_pdev;
@@ -581,9 +581,13 @@ static int __init dcdbas_init(void)
  */
 static void __exit dcdbas_exit(void)
 {
-	platform_device_unregister(dcdbas_pdev);
+	/*
+	 * make sure functions that use dcdbas_pdev are called
+	 * before platform_device_unregister
+	 */
 	unregister_reboot_notifier(&dcdbas_reboot_nb);
 	smi_data_buf_free();
+	platform_device_unregister(dcdbas_pdev);
 }
 
 module_init(dcdbas_init);
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 2d2d4ac3525a..960dae5c87d1 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -1155,6 +1155,12 @@ static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
 
 	spin_lock_irq(target->scsi_host->host_lock);
 
+	if (target->state == SRP_TARGET_DEAD ||
+	    target->state == SRP_TARGET_REMOVED) {
+		scmnd->result = DID_BAD_TARGET << 16;
+		goto out;
+	}
+
 	if (scmnd->host_scribble == (void *) -1L)
 		goto out;
 
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 19b1b0121726..ad6217467676 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -58,7 +58,7 @@ static unsigned int psmouse_resetafter = 5;
 module_param_named(resetafter, psmouse_resetafter, uint, 0644);
 MODULE_PARM_DESC(resetafter, "Reset device after so many bad packets (0 = never).");
 
-static unsigned int psmouse_resync_time = 5;
+static unsigned int psmouse_resync_time;
 module_param_named(resync_time, psmouse_resync_time, uint, 0644);
 MODULE_PARM_DESC(resync_time, "How long can mouse stay idle before forcing resync (in seconds, 0 = never).");
 
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index 8159bcecd0c2..df9d65201819 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -1929,6 +1929,8 @@ static struct pci_device_id hisax_pci_tbl[] __initdata = {
 	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B00B,         PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B00C,         PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B100,         PCI_ANY_ID, PCI_ANY_ID},
+	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B700,         PCI_ANY_ID, PCI_ANY_ID},
+	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B701,         PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_ABOCOM,   PCI_DEVICE_ID_ABOCOM_2BD1,      PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_ASUSTEK,  PCI_DEVICE_ID_ASUSTEK_0675,     PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_BERKOM,   PCI_DEVICE_ID_BERKOM_T_CONCEPT, PCI_ANY_ID, PCI_ANY_ID},
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 4866fc32d8d9..91d25acb5ede 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -51,6 +51,8 @@ static const PCI_ENTRY id_list[] =
 	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00B, "Billion", "B00B"},
 	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00C, "Billion", "B00C"},
 	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B100, "Seyeon", "B100"},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B700, "Primux II S0", "B700"},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B701, "Primux II S0 NT", "B701"},
 	{PCI_VENDOR_ID_ABOCOM, PCI_DEVICE_ID_ABOCOM_2BD1, "Abocom/Magitek", "2BD1"},
 	{PCI_VENDOR_ID_ASUSTEK, PCI_DEVICE_ID_ASUSTEK_0675, "Asuscom/Askey", "675"},
 	{PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_T_CONCEPT, "German telekom", "T-Concept"},
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index ca5b4a3b683e..262c44127419 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -1,7 +1,7 @@
 /*
  * hfc_usb.c
  *
- * $Id: hfc_usb.c,v 4.36 2005/04/08 09:55:13 martinb1 Exp $
+ * $Id: hfc_usb.c,v 2.3.2.13 2006/02/17 17:17:22 mbachem Exp $
  *
  * modular HiSax ISDN driver for Colognechip HFC-S USB chip
  *
@@ -45,7 +45,7 @@
 #include "hfc_usb.h"
 
 static const char *hfcusb_revision =
-    "$Revision: 4.36 $ $Date: 2005/04/08 09:55:13 $ ";
+    "$Revision: 2.3.2.13 $ $Date: 2006/02/17 17:17:22 $ ";
 
 /* Hisax debug support
 * use "modprobe debug=x" where x is bitfield of USB_DBG & ISDN_DBG
@@ -219,7 +219,7 @@ symbolic(struct hfcusb_symbolic_list list[], const int num)
 	for (i = 0; list[i].name != NULL; i++)
 		if (list[i].num == num)
 			return (list[i].name);
-	return "<unkown ERROR>";
+	return "<unknown ERROR>";
 }
 
 
@@ -235,9 +235,9 @@ ctrl_start_transfer(hfcusb_data * hfc)
 		hfc->ctrl_urb->transfer_buffer = NULL;
 		hfc->ctrl_urb->transfer_buffer_length = 0;
 		hfc->ctrl_write.wIndex =
-		    hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg;
+		    cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg);
 		hfc->ctrl_write.wValue =
-		    hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val;
+		    cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val);
 
 		usb_submit_urb(hfc->ctrl_urb, GFP_ATOMIC);	/* start transfer */
 	}
@@ -1282,7 +1282,7 @@ usb_init(hfcusb_data * hfc)
 	/* init the background machinery for control requests */
 	hfc->ctrl_read.bRequestType = 0xc0;
 	hfc->ctrl_read.bRequest = 1;
-	hfc->ctrl_read.wLength = 1;
+	hfc->ctrl_read.wLength = cpu_to_le16(1);
 	hfc->ctrl_write.bRequestType = 0x40;
 	hfc->ctrl_write.bRequest = 0;
 	hfc->ctrl_write.wLength = 0;
@@ -1373,9 +1373,8 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	vend_idx = 0xffff;
 	for (i = 0; hfcusb_idtab[i].idVendor; i++) {
-		if (dev->descriptor.idVendor == hfcusb_idtab[i].idVendor
-		    && dev->descriptor.idProduct ==
-		    hfcusb_idtab[i].idProduct) {
+		if ((le16_to_cpu(dev->descriptor.idVendor) == hfcusb_idtab[i].idVendor)
+		    && (le16_to_cpu(dev->descriptor.idProduct) == hfcusb_idtab[i].idProduct)) {
 			vend_idx = i;
 			continue;
 		}
@@ -1516,8 +1515,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 							    usb_transfer_mode
 							    = USB_INT;
 							packet_size =
-							    ep->desc.
-							    wMaxPacketSize;
+							    le16_to_cpu(ep->desc.wMaxPacketSize);
 							break;
 						case USB_ENDPOINT_XFER_BULK:
 							if (ep_addr & 0x80)
@@ -1545,8 +1543,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 							    usb_transfer_mode
 							    = USB_BULK;
 							packet_size =
-							    ep->desc.
-							    wMaxPacketSize;
+							    le16_to_cpu(ep->desc.wMaxPacketSize);
 							break;
 						case USB_ENDPOINT_XFER_ISOC:
 							if (ep_addr & 0x80)
@@ -1574,8 +1571,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 							    usb_transfer_mode
 							    = USB_ISOC;
 							iso_packet_size =
-							    ep->desc.
-							    wMaxPacketSize;
+							    le16_to_cpu(ep->desc.wMaxPacketSize);
 							break;
 						default:
 							context->
@@ -1588,10 +1584,8 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 						    fifonum = cidx;
 						context->fifos[cidx].hfc =
 						    context;
-						context->fifos[cidx].
-						    usb_packet_maxlen =
-						    ep->desc.
-						    wMaxPacketSize;
+						context->fifos[cidx].usb_packet_maxlen =
+						    le16_to_cpu(ep->desc.wMaxPacketSize);
 						context->fifos[cidx].
 						    intervall =
 						    ep->desc.bInterval;
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 393633681f49..aeaa1db74bd8 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1682,6 +1682,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 #ifdef ISDN_DEBUG_MODEM_OPEN
 		printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
 #endif
+		module_put(info->owner);
 		return;
 	}
 	info->flags |= ISDN_ASYNC_CLOSING;
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index bb8d5efe19bf..6c0ba04bc57a 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -35,6 +35,8 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 
+#include <asm/prom.h>
+
 #include "windfarm.h"
 
 #define VERSION "0.2"
@@ -465,6 +467,11 @@ static int __init windfarm_core_init(void)
 {
 	DBG("wf: core loaded\n");
 
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
 	platform_device_register(&wf_platform_device);
 	return 0;
 }
diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c
index 607dbaca69c9..81337cd16e80 100644
--- a/drivers/macintosh/windfarm_cpufreq_clamp.c
+++ b/drivers/macintosh/windfarm_cpufreq_clamp.c
@@ -8,6 +8,8 @@
 #include <linux/wait.h>
 #include <linux/cpufreq.h>
 
+#include <asm/prom.h>
+
 #include "windfarm.h"
 
 #define VERSION "0.3"
@@ -74,6 +76,12 @@ static int __init wf_cpufreq_clamp_init(void)
 {
 	struct wf_control *clamp;
 
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
+
 	clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
 	if (clamp == NULL)
 		return -ENOMEM;
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 906d3ecae6e6..423bfa2432c0 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -25,7 +25,7 @@
 
 #include "windfarm.h"
 
-#define VERSION "0.1"
+#define VERSION "0.2"
 
 #undef DEBUG
 
@@ -113,6 +113,7 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
 					     const char *loc)
 {
 	struct wf_lm75_sensor *lm;
+	int rc;
 
 	DBG("wf_lm75: creating  %s device at address 0x%02x\n",
 	    ds1775 ? "ds1775" : "lm75", addr);
@@ -139,9 +140,11 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
 	lm->i2c.driver = &wf_lm75_driver;
 	strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
 
-	if (i2c_attach_client(&lm->i2c)) {
-		printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
-		       ds1775 ? "ds1775" : "lm75", lm->i2c.name);
+	rc = i2c_attach_client(&lm->i2c);
+	if (rc) {
+		printk(KERN_ERR "windfarm: failed to attach %s %s to i2c,"
+		       " err %d\n", ds1775 ? "ds1775" : "lm75",
+		       lm->i2c.name, rc);
 		goto fail;
 	}
 
@@ -175,16 +178,22 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
 	     (dev = of_get_next_child(busnode, dev)) != NULL;) {
 		const char *loc =
 			get_property(dev, "hwsensor-location", NULL);
-		u32 *reg = (u32 *)get_property(dev, "reg", NULL);
-		DBG(" dev: %s... (loc: %p, reg: %p)\n", dev->name, loc, reg);
-		if (loc == NULL || reg == NULL)
+		u8 addr;
+
+		/* We must re-match the adapter in order to properly check
+		 * the channel on multibus setups
+		 */
+		if (!pmac_i2c_match_adapter(dev, adapter))
+			continue;
+		addr = pmac_i2c_get_dev_addr(dev);
+		if (loc == NULL || addr == 0)
 			continue;
 		/* real lm75 */
 		if (device_is_compatible(dev, "lm75"))
-			wf_lm75_create(adapter, *reg, 0, loc);
+			wf_lm75_create(adapter, addr, 0, loc);
 		/* ds1775 (compatible, better resolution */
 		else if (device_is_compatible(dev, "ds1775"))
-			wf_lm75_create(adapter, *reg, 1, loc);
+			wf_lm75_create(adapter, addr, 1, loc);
 	}
 	return 0;
 }
@@ -206,6 +215,11 @@ static int wf_lm75_detach(struct i2c_client *client)
 
 static int __init wf_lm75_sensor_init(void)
 {
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
 	return i2c_add_driver(&wf_lm75_driver);
 }
 
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index 5b9ad6ca7cba..8e99d408fddd 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -17,7 +17,7 @@
 
 #include "windfarm.h"
 
-#define VERSION "0.1"
+#define VERSION "0.2"
 
 /* This currently only exports the external temperature sensor,
    since that's all the control loops need. */
@@ -81,7 +81,7 @@ static struct wf_sensor_ops wf_max6690_ops = {
 static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr)
 {
 	struct wf_6690_sensor *max;
-	char *name = "u4-temp";
+	char *name = "backside-temp";
 
 	max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
 	if (max == NULL) {
@@ -118,7 +118,6 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
 	struct device_node *busnode, *dev = NULL;
 	struct pmac_i2c_bus *bus;
 	const char *loc;
-	u32 *reg;
 
 	bus = pmac_i2c_adapter_to_bus(adapter);
 	if (bus == NULL)
@@ -126,16 +125,23 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
 	busnode = pmac_i2c_get_bus_node(bus);
 
 	while ((dev = of_get_next_child(busnode, dev)) != NULL) {
+		u8 addr;
+
+		/* We must re-match the adapter in order to properly check
+		 * the channel on multibus setups
+		 */
+		if (!pmac_i2c_match_adapter(dev, adapter))
+			continue;
 		if (!device_is_compatible(dev, "max6690"))
 			continue;
+		addr = pmac_i2c_get_dev_addr(dev);
 		loc = get_property(dev, "hwsensor-location", NULL);
-		reg = (u32 *) get_property(dev, "reg", NULL);
-		if (!loc || !reg)
+		if (loc == NULL || addr == 0)
 			continue;
-		printk("found max6690, loc=%s reg=%x\n", loc, *reg);
+		printk("found max6690, loc=%s addr=0x%02x\n", loc, addr);
 		if (strcmp(loc, "BACKSIDE"))
 			continue;
-		wf_max6690_create(adapter, *reg);
+		wf_max6690_create(adapter, addr);
 	}
 
 	return 0;
@@ -153,6 +159,11 @@ static int wf_max6690_detach(struct i2c_client *client)
 
 static int __init wf_max6690_sensor_init(void)
 {
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
 	return i2c_add_driver(&wf_max6690_driver);
 }
 
diff --git a/drivers/macintosh/windfarm_pid.c b/drivers/macintosh/windfarm_pid.c
index 0842432e27ad..f10efb28cae4 100644
--- a/drivers/macintosh/windfarm_pid.c
+++ b/drivers/macintosh/windfarm_pid.c
@@ -143,3 +143,7 @@ s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 new_power, s32 new_temp)
 	return st->target;
 }
 EXPORT_SYMBOL_GPL(wf_cpu_pid_run);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("PID algorithm for PowerMacs thermal control");
+MODULE_LICENSE("GPL");
diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c
index c2a4e689c784..ef66bf2778ec 100644
--- a/drivers/macintosh/windfarm_pm112.c
+++ b/drivers/macintosh/windfarm_pm112.c
@@ -358,6 +358,7 @@ static void backside_fan_tick(void)
 		return;
 	if (!backside_tick) {
 		/* first time; initialize things */
+		printk(KERN_INFO "windfarm: Backside control loop started.\n");
 		backside_param.min = backside_fan->ops->get_min(backside_fan);
 		backside_param.max = backside_fan->ops->get_max(backside_fan);
 		wf_pid_init(&backside_pid, &backside_param);
@@ -407,6 +408,7 @@ static void drive_bay_fan_tick(void)
 		return;
 	if (!drive_bay_tick) {
 		/* first time; initialize things */
+		printk(KERN_INFO "windfarm: Drive bay control loop started.\n");
 		drive_bay_prm.min = drive_bay_fan->ops->get_min(drive_bay_fan);
 		drive_bay_prm.max = drive_bay_fan->ops->get_max(drive_bay_fan);
 		wf_pid_init(&drive_bay_pid, &drive_bay_prm);
@@ -458,6 +460,7 @@ static void slots_fan_tick(void)
 		return;
 	if (!slots_started) {
 		/* first time; initialize things */
+		printk(KERN_INFO "windfarm: Slots control loop started.\n");
 		wf_pid_init(&slots_pid, &slots_param);
 		slots_started = 1;
 	}
@@ -504,6 +507,7 @@ static void pm112_tick(void)
 
 	if (!started) {
 		started = 1;
+		printk(KERN_INFO "windfarm: CPUs control loops started.\n");
 		for (i = 0; i < nr_cores; ++i) {
 			if (create_cpu_loop(i) < 0) {
 				failure_state = FAILURE_PERM;
@@ -594,8 +598,6 @@ static void pm112_new_sensor(struct wf_sensor *sr)
 {
 	unsigned int i;
 
-	if (have_all_sensors)
-		return;
 	if (!strncmp(sr->name, "cpu-temp-", 9)) {
 		i = sr->name[9] - '0';
 		if (sr->name[10] == 0 && i < NR_CORES &&
@@ -613,7 +615,7 @@ static void pm112_new_sensor(struct wf_sensor *sr)
 	} else if (!strcmp(sr->name, "slots-power")) {
 		if (slots_power == NULL && wf_get_sensor(sr) == 0)
 			slots_power = sr;
-	} else if (!strcmp(sr->name, "u4-temp")) {
+	} else if (!strcmp(sr->name, "backside-temp")) {
 		if (u4_temp == NULL && wf_get_sensor(sr) == 0)
 			u4_temp = sr;
 	} else
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index d39f584cd8b3..5d88329e3c7a 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -306,6 +306,7 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 	r1bio_t * r1_bio = (r1bio_t *)(bio->bi_private);
 	int mirror, behind = test_bit(R1BIO_BehindIO, &r1_bio->state);
 	conf_t *conf = mddev_to_conf(r1_bio->mddev);
+	struct bio *to_put = NULL;
 
 	if (bio->bi_size)
 		return 1;
@@ -323,6 +324,7 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 		 * this branch is our 'one mirror IO has finished' event handler:
 		 */
 		r1_bio->bios[mirror] = NULL;
+		to_put = bio;
 		if (!uptodate) {
 			md_error(r1_bio->mddev, conf->mirrors[mirror].rdev);
 			/* an I/O failed, we can't clear the bitmap */
@@ -375,7 +377,7 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 			/* Don't dec_pending yet, we want to hold
 			 * the reference over the retry
 			 */
-			return 0;
+			goto out;
 		}
 		if (test_bit(R1BIO_BehindIO, &r1_bio->state)) {
 			/* free extra copy of the data pages */
@@ -392,10 +394,11 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 		raid_end_bio_io(r1_bio);
 	}
 
-	if (r1_bio->bios[mirror]==NULL)
-		bio_put(bio);
-
 	rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
+ out:
+	if (to_put)
+		bio_put(to_put);
+
 	return 0;
 }
 
@@ -857,7 +860,7 @@ static int make_request(request_queue_t *q, struct bio * bio)
 	atomic_set(&r1_bio->remaining, 0);
 	atomic_set(&r1_bio->behind_remaining, 0);
 
-	do_barriers = bio->bi_rw & BIO_RW_BARRIER;
+	do_barriers = bio_barrier(bio);
 	if (do_barriers)
 		set_bit(R1BIO_Barrier, &r1_bio->state);
 
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 390cc3a99ce6..9c7f122826e0 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -526,7 +526,7 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 		info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
 	} else
 	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
-	if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+	if ((fc->fe = vp310_mt312_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
 		ops = fc->fe->ops;
 
 		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index 34c3189a1a33..356f447ee2ab 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -382,7 +382,7 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *
 EXPORT_SYMBOL(bt878_device_control);
 
 
-struct cards card_list[] __devinitdata = {
+static struct cards card_list[] __devinitdata = {
 
 	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV,			"Nebula Electronics DigiTV" },
 	{ 0x07611461, BTTV_BOARD_AVDVBT_761,			"AverMedia AverTV DVB-T 761" },
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index 3a2ff1cc24b7..0310e3dd07e6 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -602,7 +602,7 @@ static int dst_type_print(u8 type)
 
 */
 
-struct dst_types dst_tlist[] = {
+static struct dst_types dst_tlist[] = {
 	{
 		.device_id = "200103A",
 		.offset = 0,
diff --git a/drivers/media/dvb/dvb-core/demux.h b/drivers/media/dvb/dvb-core/demux.h
index 9f025825b2d2..0c1d87c5227a 100644
--- a/drivers/media/dvb/dvb-core/demux.h
+++ b/drivers/media/dvb/dvb-core/demux.h
@@ -216,7 +216,7 @@ struct dmx_frontend {
 /*--------------------------------------------------------------------------*/
 
 /*
- * Flags OR'ed in the capabilites field of struct dmx_demux.
+ * Flags OR'ed in the capabilities field of struct dmx_demux.
  */
 
 #define DMX_TS_FILTERING                        1
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index f327fac1688e..162f9795cd89 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -282,7 +282,7 @@ static struct cx22702_config cxusb_cx22702_config = {
 	.pll_set  = dvb_usb_pll_set_i2c,
 };
 
-static struct lgdt330x_config cxusb_lgdt330x_config = {
+static struct lgdt330x_config cxusb_lgdt3303_config = {
 	.demod_address = 0x0e,
 	.demod_chip    = LGDT3303,
 	.pll_set       = dvb_usb_pll_set_i2c,
@@ -357,14 +357,14 @@ static int cxusb_cx22702_frontend_attach(struct dvb_usb_device *d)
 	return -EIO;
 }
 
-static int cxusb_lgdt330x_frontend_attach(struct dvb_usb_device *d)
+static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_device *d)
 {
 	if (usb_set_interface(d->udev,0,7) < 0)
 		err("set interface failed");
 
 	cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, NULL, 0);
 
-	if ((d->fe = lgdt330x_attach(&cxusb_lgdt330x_config, &d->i2c_adap)) != NULL)
+	if ((d->fe = lgdt330x_attach(&cxusb_lgdt3303_config, &d->i2c_adap)) != NULL)
 		return 0;
 
 	return -EIO;
@@ -506,7 +506,7 @@ static struct dvb_usb_properties cxusb_bluebird_lgh064f_properties = {
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
 	.power_ctrl       = cxusb_power_ctrl,
-	.frontend_attach  = cxusb_lgdt330x_frontend_attach,
+	.frontend_attach  = cxusb_lgdt3303_frontend_attach,
 	.tuner_attach     = cxusb_lgh064f_tuner_attach,
 
 	.i2c_algo         = &cxusb_i2c_algo,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
index 716f8bf528cd..ce34a55e5c24 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -47,7 +47,7 @@ static int dvb_usb_init(struct dvb_usb_device *d)
 
 	d->state = DVB_USB_STATE_INIT;
 
-/* check the capabilites and set appropriate variables */
+/* check the capabilities and set appropriate variables */
 
 /* speed - when running at FULL speed we need a HW PID filter */
 	if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) {
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 5e5d21ad93c9..d4909e5c67e0 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -87,7 +87,7 @@ struct dvb_usb_device;
 
 /**
  * struct dvb_usb_properties - properties of a dvb-usb-device
- * @caps: capabilites of the DVB USB device.
+ * @caps: capabilities of the DVB USB device.
  * @pid_filter_count: number of PID filter position in the optional hardware
  *  PID-filter.
  *
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 76b6a2aef32f..c676b1e23ab0 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -29,7 +29,7 @@ config DVB_TDA8083
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_MT312
-	tristate "Zarlink MT312 based"
+	tristate "Zarlink VP310/MT312 based"
 	depends on DVB_CORE
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index ec4e641acc64..d3aea83cf218 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -612,76 +612,6 @@ static void mt312_release(struct dvb_frontend* fe)
 	kfree(state);
 }
 
-static struct dvb_frontend_ops vp310_mt312_ops;
-
-struct dvb_frontend* vp310_attach(const struct mt312_config* config,
-				  struct i2c_adapter* i2c)
-{
-	struct mt312_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
-	strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
-
-	/* check if the demod is there */
-	if (mt312_readreg(state, ID, &state->id) < 0)
-		goto error;
-	if (state->id != ID_VP310) {
-		goto error;
-	}
-
-	/* create dvb_frontend */
-	state->frequency = 90;
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-struct dvb_frontend* mt312_attach(const struct mt312_config* config,
-				  struct i2c_adapter* i2c)
-{
-	struct mt312_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
-	strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
-
-	/* check if the demod is there */
-	if (mt312_readreg(state, ID, &state->id) < 0)
-		goto error;
-	if (state->id != ID_MT312) {
-		goto error;
-	}
-
-	/* create dvb_frontend */
-	state->frequency = 60;
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
 static struct dvb_frontend_ops vp310_mt312_ops = {
 
 	.info = {
@@ -720,6 +650,49 @@ static struct dvb_frontend_ops vp310_mt312_ops = {
 	.set_voltage = mt312_set_voltage,
 };
 
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+					struct i2c_adapter* i2c)
+{
+	struct mt312_state* state = NULL;
+
+	/* allocate memory for the internal state */
+	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+	memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
+
+	/* check if the demod is there */
+	if (mt312_readreg(state, ID, &state->id) < 0)
+		goto error;
+
+	switch (state->id) {
+	case ID_VP310:
+		strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
+		state->frequency = 90;
+		break;
+	case ID_MT312:
+		strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
+		state->frequency = 60;
+		break;
+	default:
+		printk (KERN_WARNING "Only Zarlink VP310/MT312 are supported chips.\n");
+		goto error;
+	}
+
+	/* create dvb_frontend */
+	state->frontend.ops = &state->ops;
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
@@ -727,5 +700,4 @@ MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver");
 MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
 MODULE_LICENSE("GPL");
 
-EXPORT_SYMBOL(mt312_attach);
-EXPORT_SYMBOL(vp310_attach);
+EXPORT_SYMBOL(vp310_mt312_attach);
diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h
index b3a53a73a117..074d844f0139 100644
--- a/drivers/media/dvb/frontends/mt312.h
+++ b/drivers/media/dvb/frontends/mt312.h
@@ -38,10 +38,8 @@ struct mt312_config
 	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
 };
 
-extern struct dvb_frontend* mt312_attach(const struct mt312_config* config,
-					 struct i2c_adapter* i2c);
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+					struct i2c_adapter* i2c);
 
-extern struct dvb_frontend* vp310_attach(const struct mt312_config* config,
-					 struct i2c_adapter* i2c);
 
 #endif // MT312_H
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 6122ba754bc5..eb15676d374f 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -393,10 +393,6 @@ static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par
 		break;
 
 	case QAM_128:
-		delay = 150;
-		sweeprate = 1000;
-		break;
-
 	case QAM_256:
 		delay = 200;
 		sweeprate = 500;
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index d36369e9e88f..7c6ccb96b157 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -1439,7 +1439,7 @@ static int check_firmware(struct av7110* av7110)
 	len = ntohl(*(u32*) ptr);
 	ptr += 4;
 	if (len >= 512) {
-		printk("dvb-ttpci: dpram file is way to big.\n");
+		printk("dvb-ttpci: dpram file is way too big.\n");
 		return -EINVAL;
 	}
 	if (crc != crc32_le(0, ptr, len)) {
@@ -2477,7 +2477,8 @@ static int frontend_init(struct av7110 *av7110)
  * The same behaviour of missing VSYNC can be duplicated on budget
  * cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
  */
-static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *pci_ext)
+static int __devinit av7110_attach(struct saa7146_dev* dev,
+				   struct saa7146_pci_extension_data *pci_ext)
 {
 	const int length = TS_WIDTH * TS_HEIGHT;
 	struct pci_dev *pdev = dev->pci;
@@ -2827,7 +2828,7 @@ err_kfree_0:
 	goto out;
 }
 
-static int av7110_detach(struct saa7146_dev* saa)
+static int __devexit av7110_detach(struct saa7146_dev* saa)
 {
 	struct av7110 *av7110 = saa->ext_priv;
 	dprintk(4, "%p\n", av7110);
@@ -2974,7 +2975,7 @@ static struct saa7146_extension av7110_extension = {
 	.module		= THIS_MODULE,
 	.pci_tbl	= &pci_tbl[0],
 	.attach		= av7110_attach,
-	.detach		= av7110_detach,
+	.detach		= __devexit_p(av7110_detach),
 
 	.irq_mask	= MASK_19 | MASK_03 | MASK_10,
 	.irq_func	= av7110_irq,
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index b2e63e9fc053..0bb6e74ae7f0 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -245,6 +245,9 @@ int av7110_bootarm(struct av7110 *av7110)
 
 	/* test DEBI */
 	iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
+	/* FIXME: Why does Nexus CA require 2x iwdebi for first init? */
+	iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
+
 	if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) {
 		printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: "
 		       "%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 617e4f6c0ed7..d54bbcdde2cc 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -208,7 +208,7 @@ static void ir_handler(struct av7110 *av7110, u32 ircom)
 }
 
 
-int __init av7110_ir_init(struct av7110 *av7110)
+int __devinit av7110_ir_init(struct av7110 *av7110)
 {
 	static struct proc_dir_entry *e;
 
@@ -248,7 +248,7 @@ int __init av7110_ir_init(struct av7110 *av7110)
 }
 
 
-void __exit av7110_ir_exit(struct av7110 *av7110)
+void __devexit av7110_ir_exit(struct av7110 *av7110)
 {
 	int i;
 
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 9f59541155d9..85d964b5b33c 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -3369,7 +3369,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
 	//DBG("cpia_ioctl: %u\n", ioctlnr);
 
 	switch (ioctlnr) {
-	/* query capabilites */
+	/* query capabilities */
 	case VIDIOCGCAP:
 	{
 		struct video_capability *b = arg;
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 08ffd1f325fc..5588b9a5c430 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -567,7 +567,7 @@ static struct v4l2_queryctrl cx25840_qctrl[] = {
 		.type          = V4L2_CTRL_TYPE_INTEGER,
 		.name          = "Contrast",
 		.minimum       = 0,
-		.maximum       = 255,
+		.maximum       = 127,
 		.step          = 1,
 		.default_value = 64,
 		.flags         = 0,
@@ -576,7 +576,7 @@ static struct v4l2_queryctrl cx25840_qctrl[] = {
 		.type          = V4L2_CTRL_TYPE_INTEGER,
 		.name          = "Saturation",
 		.minimum       = 0,
-		.maximum       = 255,
+		.maximum       = 127,
 		.step          = 1,
 		.default_value = 64,
 		.flags         = 0,
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 048d000941c7..ffd87ce55556 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -1027,7 +1027,7 @@ static struct v4l2_queryctrl saa7115_qctrl[] = {
 		.type          = V4L2_CTRL_TYPE_INTEGER,
 		.name          = "Contrast",
 		.minimum       = 0,
-		.maximum       = 255,
+		.maximum       = 127,
 		.step          = 1,
 		.default_value = 64,
 		.flags         = 0,
@@ -1036,7 +1036,7 @@ static struct v4l2_queryctrl saa7115_qctrl[] = {
 		.type          = V4L2_CTRL_TYPE_INTEGER,
 		.name          = "Saturation",
 		.minimum       = 0,
-		.maximum       = 255,
+		.maximum       = 127,
 		.step          = 1,
 		.default_value = 64,
 		.flags         = 0,
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index a7a6ab9298a9..7df5e0826e12 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -54,10 +54,12 @@ MODULE_PARM_DESC(debug,"enable debug messages [alsa]");
 
 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */
 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
-static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
+static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
 
 module_param_array(index, int, NULL, 0444);
+module_param_array(enable, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s).");
+MODULE_PARM_DESC(enable, "Enable (or not) the SAA7134 capture interface(s).");
 
 #define dprintk(fmt, arg...)    if (debug) \
 	printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ##arg)
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 5a35d3b6550d..6bc63a4086c1 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -977,7 +977,7 @@ struct saa7134_board saa7134_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
-		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
 		.inputs         = {{
 			.name = name_tv,
 			.vmux = 3,
@@ -1666,7 +1666,7 @@ struct saa7134_board saa7134_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
-		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
 		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs         = {{
 			.name = name_tv,
@@ -2187,7 +2187,7 @@ struct saa7134_board saa7134_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= 0x61,
 		.radio_addr	= ADDR_UNSET,
-		.tda9887_conf   = TDA9887_PRESENT,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
 		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs = {{
 			.name   = name_tv,
@@ -2211,7 +2211,7 @@ struct saa7134_board saa7134_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= 0x61,
 		.radio_addr	= ADDR_UNSET,
-		.tda9887_conf   = TDA9887_PRESENT,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
 		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs = {{
 			.name   = name_tv,
@@ -2392,7 +2392,7 @@ struct saa7134_board saa7134_boards[] = {
 		}},
 	},
 	[SAA7134_BOARD_PINNACLE_PCTV_110i] = {
-		.name           = "Pinnacle PCTV 110i (saa7133)",
+	       .name           = "Pinnacle PCTV 40i/50i/110i (saa7133)",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_TDA8290,
 		.radio_type     = UNSET,
@@ -2407,6 +2407,10 @@ struct saa7134_board saa7134_boards[] = {
 		},{
 			  .name = name_comp1,
 			  .vmux = 1,
+			 .amux = LINE2,
+	       },{
+			 .name = name_comp2,
+			 .vmux = 0,
 			  .amux = LINE2,
 		},{
 			  .name = name_svideo,
@@ -2745,7 +2749,7 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7130,
 		.subvendor    = 0x1048,
-		.subdevice    = 0x226b,
+		.subdevice    = 0x226a,
 		.driver_data  = SAA7134_BOARD_ELSA_500TV,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
@@ -3201,6 +3205,11 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		/* power-up tuner chip */
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00040000, 0x00040000);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
+	case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
+		/* this turns the remote control chip off to work around a bug in it */
+		saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
+		saa_writeb(SAA7134_GPIO_GPSTATUS1, 0x80);
+		break;
 	case SAA7134_BOARD_MONSTERTV_MOBILE:
 		/* power-up tuner chip */
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00040000, 0x00040000);
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 1a536e865277..9db8e13f21c3 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -110,6 +110,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe)
 	mt352_write(fe, fsm_ctl_cfg,    sizeof(fsm_ctl_cfg));
 	mt352_write(fe, scan_ctl_cfg,   sizeof(scan_ctl_cfg));
 	mt352_write(fe, irq_cfg,        sizeof(irq_cfg));
+
 	return 0;
 }
 
@@ -117,8 +118,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
 				  struct dvb_frontend_parameters* params,
 				  u8* pllbuf)
 {
-	static int on  = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
-	static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
+	u8 off[] = { 0x00, 0xf1};
+	u8 on[]  = { 0x00, 0x71};
+	struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
+
 	struct saa7134_dev *dev = fe->dvb->priv;
 	struct v4l2_frequency f;
 
@@ -126,9 +129,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
 	f.tuner     = 0;
 	f.type      = V4L2_TUNER_DIGITAL_TV;
 	f.frequency = params->frequency / 1000 * 16 / 1000;
-	saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
+	i2c_transfer(&dev->i2c_adap, &msg, 1);
 	saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
-	saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
+	msg.buf = on;
+	i2c_transfer(&dev->i2c_adap, &msg, 1);
 
 	pinnacle_antenna_pwr(dev, antenna_pwr);
 
diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c
index 7b4fb282ac82..a796a4e1917c 100644
--- a/drivers/media/video/tda8290.c
+++ b/drivers/media/video/tda8290.c
@@ -580,9 +580,10 @@ int tda8290_init(struct i2c_client *c)
 
 int tda8290_probe(struct i2c_client *c)
 {
-	unsigned char soft_reset[]  = { 0x00, 0x00 };
-	unsigned char easy_mode_b[] = { 0x01, 0x02 };
-	unsigned char easy_mode_g[] = { 0x01, 0x04 };
+	unsigned char soft_reset[]   = { 0x00, 0x00 };
+	unsigned char easy_mode_b[]  = { 0x01, 0x02 };
+	unsigned char easy_mode_g[]  = { 0x01, 0x04 };
+	unsigned char restore_9886[] = { 0x00, 0xd6, 0x30 };
 	unsigned char addr_dto_lsb = 0x07;
 	unsigned char data;
 
@@ -599,6 +600,7 @@ int tda8290_probe(struct i2c_client *c)
 			return 0;
 		}
 	}
+	i2c_master_send(c, restore_9886, 3);
 	return -1;
 }
 
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index e7ee619d62c5..b6101bf446d4 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -713,8 +713,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 			struct v4l2_frequency *f = arg;
 
 			switch_v4l2();
-			if (V4L2_TUNER_RADIO == f->type &&
-			    V4L2_TUNER_RADIO != t->mode) {
+			if ((V4L2_TUNER_RADIO == f->type && V4L2_TUNER_RADIO != t->mode)
+				|| (V4L2_TUNER_DIGITAL_TV == f->type
+					&& V4L2_TUNER_DIGITAL_TV != t->mode)) {
 				if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
 					    == EINVAL)
 					return 0;
diff --git a/drivers/media/video/videocodec.h b/drivers/media/video/videocodec.h
index 156ae57096fe..b1239ac7f371 100644
--- a/drivers/media/video/videocodec.h
+++ b/drivers/media/video/videocodec.h
@@ -56,7 +56,7 @@
    the slave is bound to it). Otherwise it doesn't need this functions and
    therfor they may not be initialized.
 
-   The other fuctions are just for convenience, as they are for shure used by
+   The other fuctions are just for convenience, as they are for sure used by
    most/all of the codecs. The last ones may be ommited, too. 
 
    See the structure declaration below for more information and which data has
diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c
index bd0cd28543ca..6699725be605 100644
--- a/drivers/media/video/zr36050.c
+++ b/drivers/media/video/zr36050.c
@@ -159,7 +159,7 @@ zr36050_wait_end (struct zr36050 *ptr)
 
 	while (!(zr36050_read_status1(ptr) & 0x4)) {
 		udelay(1);
-		if (i++ > 200000) {	// 200ms, there is for shure something wrong!!!
+		if (i++ > 200000) {	// 200ms, there is for sure something wrong!!!
 			dprintk(1,
 				"%s: timout at wait_end (last status: 0x%02x)\n",
 				ptr->name, ptr->status1);
diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c
index 28fa31a5f150..d8dd003a7aad 100644
--- a/drivers/media/video/zr36060.c
+++ b/drivers/media/video/zr36060.c
@@ -161,7 +161,7 @@ zr36060_wait_end (struct zr36060 *ptr)
 
 	while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) {
 		udelay(1);
-		if (i++ > 200000) {	// 200ms, there is for shure something wrong!!!
+		if (i++ > 200000) {	// 200ms, there is for sure something wrong!!!
 			dprintk(1,
 				"%s: timout at wait_end (last status: 0x%02x)\n",
 				ptr->name, ptr->status);
diff --git a/drivers/media/video/zr36120_i2c.c b/drivers/media/video/zr36120_i2c.c
index 6bfe84d657f1..21fde43a6aed 100644
--- a/drivers/media/video/zr36120_i2c.c
+++ b/drivers/media/video/zr36120_i2c.c
@@ -65,7 +65,7 @@ void attach_inform(struct i2c_bus *bus, int id)
 	 case I2C_DRIVERID_VIDEODECODER:
 		DEBUG(printk(CARD_INFO "decoder attached\n",CARD));
 
-		/* fetch the capabilites of the decoder */
+		/* fetch the capabilities of the decoder */
 		rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc);
 		if (rv) {
 			DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD));
diff --git a/drivers/misc/ibmasm/ibmasm.h b/drivers/misc/ibmasm/ibmasm.h
index 1cef2387fa65..6aba41954448 100644
--- a/drivers/misc/ibmasm/ibmasm.h
+++ b/drivers/misc/ibmasm/ibmasm.h
@@ -101,15 +101,16 @@ struct command {
 static inline void command_put(struct command *cmd)
 {
 	unsigned long flags;
+	spinlock_t *lock = cmd->lock;
 
-	spin_lock_irqsave(cmd->lock, flags);
-        kobject_put(&cmd->kobj);
-	spin_unlock_irqrestore(cmd->lock, flags);
+	spin_lock_irqsave(lock, flags);
+	kobject_put(&cmd->kobj);
+	spin_unlock_irqrestore(lock, flags);
 }
 
 static inline void command_get(struct command *cmd)
 {
-        kobject_get(&cmd->kobj);
+	kobject_get(&cmd->kobj);
 }
 
 
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 824e430486c2..830528dce0ca 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -1574,6 +1574,7 @@ MODULE_LICENSE("GPL");
 
 static int __init el3_init_module(void)
 {
+	int ret = 0;
 	el3_cards = 0;
 
 	if (debug >= 0)
@@ -1589,14 +1590,16 @@ static int __init el3_init_module(void)
 	}
 
 #ifdef CONFIG_EISA
-	if (eisa_driver_register (&el3_eisa_driver) < 0) {
-		eisa_driver_unregister (&el3_eisa_driver);
-	}
+	ret = eisa_driver_register(&el3_eisa_driver);
 #endif
 #ifdef CONFIG_MCA
-	mca_register_driver(&el3_mca_driver);
+	{
+		int err = mca_register_driver(&el3_mca_driver);
+		if (ret == 0)
+			ret = err;
+	}
 #endif
-	return 0;
+	return ret;
 }
 
 static void __exit el3_cleanup_module(void)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index bdf294d2df26..d4d8e5f9ebf1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1087,7 +1087,8 @@ config NE2000
 	  without a specific driver are compatible with NE2000.
 
 	  If you have a PCI NE2000 card however, say N here and Y to "PCI
-	  NE2000 support", above. If you have a NE2000 card and are running on
+	  NE2000 and clone support" under "EISA, VLB, PCI and on board
+	  controllers" below. If you have a NE2000 card and are running on
 	  an MCA system (a bus system used on some IBM PS/2 computers and
 	  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
 	  below.
diff --git a/drivers/net/de620.c b/drivers/net/de620.c
index 0069f5fa973a..22fc5b869a60 100644
--- a/drivers/net/de620.c
+++ b/drivers/net/de620.c
@@ -1012,7 +1012,7 @@ static int __init read_eeprom(struct net_device *dev)
 #ifdef MODULE
 static struct net_device *de620_dev;
 
-int init_module(void)
+int __init init_module(void)
 {
 	de620_dev = de620_probe(-1);
 	if (IS_ERR(de620_dev))
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 6376b63d9b17..1f3627470c95 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -50,8 +50,8 @@
 
 */
 #define DRV_NAME	"D-Link DL2000-based linux driver"
-#define DRV_VERSION	"v1.17a"
-#define DRV_RELDATE	"2002/10/04"
+#define DRV_VERSION	"v1.17b"
+#define DRV_RELDATE	"2006/03/10"
 #include "dl2k.h"
 
 static char version[] __devinitdata =
@@ -765,7 +765,7 @@ rio_free_tx (struct net_device *dev, int irq)
 			break;
 		skb = np->tx_skbuff[entry];
 		pci_unmap_single (np->pdev,
-				  np->tx_ring[entry].fraginfo,
+				  np->tx_ring[entry].fraginfo & 0xffffffffffff,
 				  skb->len, PCI_DMA_TODEVICE);
 		if (irq)
 			dev_kfree_skb_irq (skb);
@@ -892,14 +892,16 @@ receive_packet (struct net_device *dev)
 
 			/* Small skbuffs for short packets */
 			if (pkt_len > copy_thresh) {
-				pci_unmap_single (np->pdev, desc->fraginfo,
+				pci_unmap_single (np->pdev,
+						  desc->fraginfo & 0xffffffffffff,
 						  np->rx_buf_sz,
 						  PCI_DMA_FROMDEVICE);
 				skb_put (skb = np->rx_skbuff[entry], pkt_len);
 				np->rx_skbuff[entry] = NULL;
 			} else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) {
 				pci_dma_sync_single_for_cpu(np->pdev,
-							    desc->fraginfo,
+				  			    desc->fraginfo & 
+							    	0xffffffffffff,
 							    np->rx_buf_sz,
 							    PCI_DMA_FROMDEVICE);
 				skb->dev = dev;
@@ -910,7 +912,8 @@ receive_packet (struct net_device *dev)
 						  pkt_len, 0);
 				skb_put (skb, pkt_len);
 				pci_dma_sync_single_for_device(np->pdev,
-							       desc->fraginfo,
+				  			       desc->fraginfo &
+							       	 0xffffffffffff,
 							       np->rx_buf_sz,
 							       PCI_DMA_FROMDEVICE);
 			}
@@ -1796,8 +1799,9 @@ rio_close (struct net_device *dev)
 		np->rx_ring[i].fraginfo = 0;
 		skb = np->rx_skbuff[i];
 		if (skb) {
-			pci_unmap_single (np->pdev, np->rx_ring[i].fraginfo,
-					  skb->len, PCI_DMA_FROMDEVICE);
+			pci_unmap_single(np->pdev, 
+					 np->rx_ring[i].fraginfo & 0xffffffffffff,
+					 skb->len, PCI_DMA_FROMDEVICE);
 			dev_kfree_skb (skb);
 			np->rx_skbuff[i] = NULL;
 		}
@@ -1805,8 +1809,9 @@ rio_close (struct net_device *dev)
 	for (i = 0; i < TX_RING_SIZE; i++) {
 		skb = np->tx_skbuff[i];
 		if (skb) {
-			pci_unmap_single (np->pdev, np->tx_ring[i].fraginfo,
-					  skb->len, PCI_DMA_TODEVICE);
+			pci_unmap_single(np->pdev, 
+					 np->tx_ring[i].fraginfo & 0xffffffffffff,
+					 skb->len, PCI_DMA_TODEVICE);
 			dev_kfree_skb (skb);
 			np->tx_skbuff[i] = NULL;
 		}
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 9adaf5fa9d48..0c631a77ccf6 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2815,7 +2815,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 					printk(KERN_ERR 
 						"__pskb_pull_tail failed.\n");
 					dev_kfree_skb_any(skb);
-					return -EFAULT;
+					return NETDEV_TX_OK;
 				}
 				len = skb->len - skb->data_len;
 				break;
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 72c1630977d6..73260364cba3 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -74,7 +74,7 @@
 #define TX_RING_SIZE		512
 #define TX_DEF_PENDING		(TX_RING_SIZE - 1)
 #define TX_MIN_PENDING		64
-#define MAX_SKB_TX_LE		(4 + 2*MAX_SKB_FRAGS)
+#define MAX_SKB_TX_LE		(4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
 
 #define STATUS_RING_SIZE	2048	/* 2 ports * (TX + 2*RX) */
 #define STATUS_LE_BYTES		(STATUS_RING_SIZE*sizeof(struct sky2_status_le))
@@ -622,8 +622,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 
 	/* Configure Rx MAC FIFO */
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
-	sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T),
-		     GMF_RX_CTRL_DEF);
+	sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
+		     GMF_OPER_ON | GMF_RX_F_FL_ON);
 
 	/* Flush Rx MAC FIFO on any flow control or error */
 	sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
@@ -995,6 +995,10 @@ static int sky2_rx_start(struct sky2_port *sky2)
 		sky2_rx_add(sky2, re->mapaddr);
 	}
 
+ 	/* Truncate oversize frames */
+ 	sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8);
+ 	sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
 	/* Tell chip about available buffers */
 	sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
 	sky2->rx_last_put = sky2_read16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX));
@@ -1145,6 +1149,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 	struct sky2_tx_le *le = NULL;
 	struct tx_ring_info *re;
 	unsigned i, len;
+	int avail;
 	dma_addr_t mapping;
 	u32 addr64;
 	u16 mss;
@@ -1287,12 +1292,16 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 	re->idx = sky2->tx_prod;
 	le->ctrl |= EOP;
 
+	avail = tx_avail(sky2);
+	if (mss != 0 || avail < TX_MIN_PENDING) {
+ 		le->ctrl |= FRC_STAT;
+		if (avail <= MAX_SKB_TX_LE)
+			netif_stop_queue(dev);
+	}
+
 	sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod,
 		     &sky2->tx_last_put, TX_RING_SIZE);
 
-	if (tx_avail(sky2) <= MAX_SKB_TX_LE)
-		netif_stop_queue(dev);
-
 out_unlock:
 	spin_unlock(&sky2->tx_lock);
 
@@ -1707,10 +1716,12 @@ static void sky2_tx_timeout(struct net_device *dev)
 
 
 #define roundup(x, y)   ((((x)+((y)-1))/(y))*(y))
-/* Want receive buffer size to be multiple of 64 bits, and incl room for vlan */
+/* Want receive buffer size to be multiple of 64 bits
+ * and incl room for vlan and truncation
+ */
 static inline unsigned sky2_buf_size(int mtu)
 {
-	return roundup(mtu + ETH_HLEN + 4, 8);
+	return roundup(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8;
 }
 
 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
@@ -1793,7 +1804,7 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2,
 	if (!(status & GMR_FS_RX_OK))
 		goto resubmit;
 
-	if ((status >> 16) != length || length > sky2->rx_bufsize)
+	if (length > sky2->netdev->mtu + ETH_HLEN)
 		goto oversize;
 
 	if (length < copybreak) {
@@ -3243,8 +3254,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 		}
 	}
 
-	err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM,
-			  DRV_NAME, hw);
+	err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw);
 	if (err) {
 		printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
 		       pci_name(pdev), pdev->irq);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 83ff5994a8d5..0f3798f81883 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -3532,9 +3532,23 @@ static inline int tg3_4g_overflow_test(dma_addr_t mapping, int len)
 		(base + len + 8 < base));
 }
 
+/* Test for DMA addresses > 40-bit */
+static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping,
+					  int len)
+{
+#if defined(CONFIG_HIGHMEM) && (BITS_PER_LONG == 64)
+	if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
+		return (((u64) mapping + len) > DMA_40BIT_MASK);
+	return 0;
+#else
+	return 0;
+#endif
+}
+
 static void tg3_set_txd(struct tg3 *, int, dma_addr_t, int, u32, u32);
 
-static int tigon3_4gb_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
+/* Workaround 4GB and 40-bit hardware DMA bugs. */
+static int tigon3_dma_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
 				       u32 last_plus_one, u32 *start,
 				       u32 base_flags, u32 mss)
 {
@@ -3742,6 +3756,9 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			if (tg3_4g_overflow_test(mapping, len))
 				would_hit_hwbug = 1;
 
+			if (tg3_40bit_overflow_test(tp, mapping, len))
+				would_hit_hwbug = 1;
+
 			if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
 				tg3_set_txd(tp, entry, mapping, len,
 					    base_flags, (i == last)|(mss << 1));
@@ -3763,7 +3780,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		/* If the workaround fails due to memory/mapping
 		 * failure, silently drop this packet.
 		 */
-		if (tigon3_4gb_hwbug_workaround(tp, skb, last_plus_one,
+		if (tigon3_dma_hwbug_workaround(tp, skb, last_plus_one,
 						&start, base_flags, mss))
 			goto out_unlock;
 
@@ -10608,8 +10625,9 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	unsigned long tg3reg_base, tg3reg_len;
 	struct net_device *dev;
 	struct tg3 *tp;
-	int i, err, pci_using_dac, pm_cap;
+	int i, err, pm_cap;
 	char str[40];
+	u64 dma_mask, persist_dma_mask;
 
 	if (tg3_version_printed++ == 0)
 		printk(KERN_INFO "%s", version);
@@ -10646,26 +10664,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		goto err_out_free_res;
 	}
 
-	/* Configure DMA attributes. */
-	err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
-	if (!err) {
-		pci_using_dac = 1;
-		err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
-		if (err < 0) {
-			printk(KERN_ERR PFX "Unable to obtain 64 bit DMA "
-			       "for consistent allocations\n");
-			goto err_out_free_res;
-		}
-	} else {
-		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-		if (err) {
-			printk(KERN_ERR PFX "No usable DMA configuration, "
-			       "aborting.\n");
-			goto err_out_free_res;
-		}
-		pci_using_dac = 0;
-	}
-
 	tg3reg_base = pci_resource_start(pdev, 0);
 	tg3reg_len = pci_resource_len(pdev, 0);
 
@@ -10679,8 +10677,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	SET_MODULE_OWNER(dev);
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
-	if (pci_using_dac)
-		dev->features |= NETIF_F_HIGHDMA;
 	dev->features |= NETIF_F_LLTX;
 #if TG3_VLAN_TAG_USED
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
@@ -10765,6 +10761,44 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		goto err_out_iounmap;
 	}
 
+	/* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit.
+	 * On 64-bit systems with IOMMU, use 40-bit dma_mask.
+	 * On 64-bit systems without IOMMU, use 64-bit dma_mask and
+	 * do DMA address check in tg3_start_xmit().
+	 */
+	if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
+		persist_dma_mask = dma_mask = DMA_40BIT_MASK;
+#ifdef CONFIG_HIGHMEM
+		dma_mask = DMA_64BIT_MASK;
+#endif
+	} else if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
+		persist_dma_mask = dma_mask = DMA_32BIT_MASK;
+	else
+		persist_dma_mask = dma_mask = DMA_64BIT_MASK;
+
+	/* Configure DMA attributes. */
+	if (dma_mask > DMA_32BIT_MASK) {
+		err = pci_set_dma_mask(pdev, dma_mask);
+		if (!err) {
+			dev->features |= NETIF_F_HIGHDMA;
+			err = pci_set_consistent_dma_mask(pdev,
+							  persist_dma_mask);
+			if (err < 0) {
+				printk(KERN_ERR PFX "Unable to obtain 64 bit "
+				       "DMA for consistent allocations\n");
+				goto err_out_iounmap;
+			}
+		}
+	}
+	if (err || dma_mask == DMA_32BIT_MASK) {
+		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (err) {
+			printk(KERN_ERR PFX "No usable DMA configuration, "
+			       "aborting.\n");
+			goto err_out_iounmap;
+		}
+	}
+
 	tg3_init_bufmgr_config(tp);
 
 #if TG3_TSO_SUPPORT != 0
@@ -10833,9 +10867,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	} else
 		tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS;
 
-	if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
-		dev->features &= ~NETIF_F_HIGHDMA;
-
 	/* flow control autonegotiation is default behavior */
 	tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
 
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index d6c3d52d2e86..6299e186c73f 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -1357,7 +1357,6 @@ static int de_open (struct net_device *dev)
 {
 	struct de_private *de = dev->priv;
 	int rc;
-	unsigned long flags;
 
 	if (netif_msg_ifup(de))
 		printk(KERN_DEBUG "%s: enabling interface\n", dev->name);
@@ -1371,18 +1370,20 @@ static int de_open (struct net_device *dev)
 		return rc;
 	}
 
-	rc = de_init_hw(de);
-	if (rc) {
-		printk(KERN_ERR "%s: h/w init failure, err=%d\n",
-		       dev->name, rc);
-		goto err_out_free;
-	}
+	dw32(IntrMask, 0);
 
 	rc = request_irq(dev->irq, de_interrupt, SA_SHIRQ, dev->name, dev);
 	if (rc) {
 		printk(KERN_ERR "%s: IRQ %d request failure, err=%d\n",
 		       dev->name, dev->irq, rc);
-		goto err_out_hw;
+		goto err_out_free;
+	}
+
+	rc = de_init_hw(de);
+	if (rc) {
+		printk(KERN_ERR "%s: h/w init failure, err=%d\n",
+		       dev->name, rc);
+		goto err_out_free_irq;
 	}
 
 	netif_start_queue(dev);
@@ -1390,11 +1391,8 @@ static int de_open (struct net_device *dev)
 
 	return 0;
 
-err_out_hw:
-	spin_lock_irqsave(&de->lock, flags);
-	de_stop_hw(de);
-	spin_unlock_irqrestore(&de->lock, flags);
-
+err_out_free_irq:
+	free_irq(dev->irq, dev);
 err_out_free:
 	de_free_rings(de);
 	return rc;
@@ -1450,6 +1448,8 @@ static void de_tx_timeout (struct net_device *dev)
 	synchronize_irq(dev->irq);
 	de_clean_rings(de);
 
+	de_init_rings(de);
+
 	de_init_hw(de);
 	
 	netif_wake_queue(dev);
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index 166de3507780..10845253c9e0 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -312,8 +312,7 @@ static int __devinit parport_register (struct pci_dev *dev,
 {
 	struct parport_pc_pci *card;
 	struct parport_serial_private *priv = pci_get_drvdata (dev);
-	int i = id->driver_data, n;
-	int success = 0;
+	int n, success = 0;
 
 	priv->par = cards[id->driver_data];
 	card = &priv->par;
@@ -344,10 +343,8 @@ static int __devinit parport_register (struct pci_dev *dev,
                                         "hi" as an offset (see SYBA
                                         def.) */
 		/* TODO: test if sharing interrupts works */
-		printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, "
-			"I/O at %#lx(%#lx)\n",
-			parport_serial_pci_tbl[i].vendor,
-			parport_serial_pci_tbl[i].device, io_lo, io_hi);
+		dev_dbg(&dev->dev, "PCI parallel port detected: I/O at "
+			"%#lx(%#lx)\n", io_lo, io_hi);
 		port = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
 					      PARPORT_DMA_NONE, dev);
 		if (port) {
@@ -359,7 +356,7 @@ static int __devinit parport_register (struct pci_dev *dev,
 	if (card->postinit_hook)
 		card->postinit_hook (dev, card, !success);
 
-	return success ? 0 : 1;
+	return 0;
 }
 
 static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 54ad93daca3c..bb96ce1db08c 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -411,7 +411,7 @@ static int pcmcia_device_probe(struct device * dev)
 	 * pseudo devices, and if not, add the second one.
 	 */
 	did = (struct pcmcia_device_id *) p_dev->dev.driver_data;
-	if ((did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
+	if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
 	    (p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
 		pcmcia_add_pseudo_device(p_dev->socket);
 
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index af1d5b404cee..33157c84d1d3 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -215,9 +215,10 @@ dasd_state_basic_to_known(struct dasd_device * device)
  * interrupt for this detection ccw uses the kernel event daemon to
  * trigger the call to dasd_change_state. All this is done in the
  * discipline code, see dasd_eckd.c.
- * After the analysis ccw is done (do_analysis returned 0 or error)
- * the block device is setup. Either a fake disk is added to allow
- * formatting or a proper device request queue is created.
+ * After the analysis ccw is done (do_analysis returned 0) the block
+ * device is setup.
+ * In case the analysis returns an error, the device setup is stopped
+ * (a fake disk was already added to allow formatting).
  */
 static inline int
 dasd_state_basic_to_ready(struct dasd_device * device)
@@ -227,13 +228,19 @@ dasd_state_basic_to_ready(struct dasd_device * device)
 	rc = 0;
 	if (device->discipline->do_analysis != NULL)
 		rc = device->discipline->do_analysis(device);
-	if (rc)
+	if (rc) {
+		if (rc != -EAGAIN)
+			device->state = DASD_STATE_UNFMT;
 		return rc;
+	}
+	/* make disk known with correct capacity */
 	dasd_setup_queue(device);
+	set_capacity(device->gdp, device->blocks << device->s2b_shift);
 	device->state = DASD_STATE_READY;
-	if (dasd_scan_partitions(device) != 0)
+	rc = dasd_scan_partitions(device);
+	if (rc)
 		device->state = DASD_STATE_BASIC;
-	return 0;
+	return rc;
 }
 
 /*
@@ -254,6 +261,15 @@ dasd_state_ready_to_basic(struct dasd_device * device)
 }
 
 /*
+ * Back to basic.
+ */
+static inline void
+dasd_state_unfmt_to_basic(struct dasd_device * device)
+{
+	device->state = DASD_STATE_BASIC;
+}
+
+/*
  * Make the device online and schedule the bottom half to start
  * the requeueing of requests from the linux request queue to the
  * ccw queue.
@@ -319,8 +335,12 @@ dasd_decrease_state(struct dasd_device *device)
 	if (device->state == DASD_STATE_READY &&
 	    device->target <= DASD_STATE_BASIC)
 		dasd_state_ready_to_basic(device);
-	
-	if (device->state == DASD_STATE_BASIC && 
+
+	if (device->state == DASD_STATE_UNFMT &&
+	    device->target <= DASD_STATE_BASIC)
+		dasd_state_unfmt_to_basic(device);
+
+	if (device->state == DASD_STATE_BASIC &&
 	    device->target <= DASD_STATE_KNOWN)
 		dasd_state_basic_to_known(device);
 	
@@ -1722,7 +1742,7 @@ dasd_open(struct inode *inp, struct file *filp)
 		goto out;
 	}
 
-	if (device->state < DASD_STATE_BASIC) {
+	if (device->state <= DASD_STATE_BASIC) {
 		DBF_DEV_EVENT(DBF_ERR, device, " %s",
 			      " Cannot open unrecognized device");
 		rc = -ENODEV;
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index 65dc844b975c..fce2835e7d19 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -100,8 +100,6 @@ dasd_scan_partitions(struct dasd_device * device)
 {
 	struct block_device *bdev;
 
-	/* Make the disk known. */
-	set_capacity(device->gdp, device->blocks << device->s2b_shift);
 	bdev = bdget_disk(device->gdp, 0);
 	if (!bdev || blkdev_get(bdev, FMODE_READ, 1) < 0)
 		return -ENODEV;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 0592354cc604..7cb0b9e78a6a 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -26,7 +26,7 @@
  *   new: the dasd_device structure is allocated.
  *   known: the discipline for the device is identified.
  *   basic: the device can do basic i/o.
- *   accept: the device is analysed (format is known).
+ *   unfmt: the device could not be analyzed (format is unknown).
  *   ready: partition detection is done and the device is can do block io.
  *   online: the device accepts requests from the block device queue.
  *
@@ -47,8 +47,9 @@
 #define DASD_STATE_NEW	  0
 #define DASD_STATE_KNOWN  1
 #define DASD_STATE_BASIC  2
-#define DASD_STATE_READY  3
-#define DASD_STATE_ONLINE 4
+#define DASD_STATE_UNFMT  3
+#define DASD_STATE_READY  4
+#define DASD_STATE_ONLINE 5
 
 #include <linux/module.h>
 #include <linux/wait.h>
diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c
index 2d5da3c75ca7..1aa3c261718a 100644
--- a/drivers/s390/block/dasd_proc.c
+++ b/drivers/s390/block/dasd_proc.c
@@ -93,6 +93,9 @@ dasd_devices_show(struct seq_file *m, void *v)
 	case DASD_STATE_BASIC:
 		seq_printf(m, "basic");
 		break;
+	case DASD_STATE_UNFMT:
+		seq_printf(m, "unformatted");
+		break;
 	case DASD_STATE_READY:
 	case DASD_STATE_ONLINE:
 		seq_printf(m, "active ");
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 8cf9905d484b..f4183d660258 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -1115,6 +1115,9 @@ chsc_enable_facility(int operation_code)
 		goto out;
 	}
 	switch (sda_area->response.code) {
+	case 0x0001: /* everything ok */
+		ret = 0;
+		break;
 	case 0x0003: /* invalid request block */
 	case 0x0007:
 		ret = -EINVAL;
@@ -1123,6 +1126,8 @@ chsc_enable_facility(int operation_code)
 	case 0x0101: /* facility not provided */
 		ret = -EOPNOTSUPP;
 		break;
+	default: /* something went wrong */
+		ret = -EIO;
 	}
  out:
 	free_page((unsigned long)sda_area);
diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c
index d6469baa7e16..72118ee68954 100644
--- a/drivers/s390/net/smsgiucv.c
+++ b/drivers/s390/net/smsgiucv.c
@@ -168,7 +168,7 @@ smsg_init(void)
 		driver_unregister(&smsg_driver);
 		return -EIO;	/* better errno ? */
 	}
-	rc = iucv_connect (&smsg_pathid, 1, 0, "*MSG    ", 0, 0, 0, 0,
+	rc = iucv_connect (&smsg_pathid, 255, 0, "*MSG    ", 0, 0, 0, 0,
 			   smsg_handle, 0);
 	if (rc) {
 		printk(KERN_ERR "SMSGIUCV: failed to connect to *MSG");
diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c
index 5d02ff4db6cc..b65462f76484 100644
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -192,7 +192,7 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
 	SDev = cd->device;
 
 	if (!sense) {
-		sense = kmalloc(sizeof(*sense), GFP_KERNEL);
+		sense = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
 		if (!sense) {
 			err = -ENOMEM;
 			goto out;
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index f3763d2ccb86..a37579ce6d76 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -2301,7 +2301,6 @@ static void receive_chars(struct uart_port *the_port)
 	int read_count, request_count = IOC4_MAX_CHARS;
 	struct uart_icount *icount;
 	struct uart_info *info = the_port->info;
-	int flip = 0;
 	unsigned long pflags;
 
 	/* Make sure all the pointers are "good" ones */
@@ -2313,7 +2312,7 @@ static void receive_chars(struct uart_port *the_port)
 	spin_lock_irqsave(&the_port->lock, pflags);
 	tty = info->tty;
 
-	request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS - 2);
+	request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS);
 
 	if (request_count > 0) {
 		icount = &the_port->icount;
@@ -2326,8 +2325,7 @@ static void receive_chars(struct uart_port *the_port)
 
 	spin_unlock_irqrestore(&the_port->lock, pflags);
 
-	if (flip)
-		tty_flip_buffer_push(tty);
+	tty_flip_buffer_push(tty);
 }
 
 /**
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 419dd3cd7862..193722d680cf 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -420,10 +420,8 @@ static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
 	if (up->port.info == NULL)
 		goto ack_tx_int;
 	xmit = &up->port.info->xmit;
-	if (uart_circ_empty(xmit)) {
-		uart_write_wakeup(&up->port);
+	if (uart_circ_empty(xmit))
 		goto ack_tx_int;
-	}
 	if (uart_tx_stopped(&up->port))
 		goto ack_tx_int;
 
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 95fb4939c675..cc1faa31d124 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -71,6 +71,11 @@ static void uart_change_pm(struct uart_state *state, int pm_state);
 void uart_write_wakeup(struct uart_port *port)
 {
 	struct uart_info *info = port->info;
+	/*
+	 * This means you called this function _after_ the port was
+	 * closed.  No cookie for you.
+	 */
+	BUG_ON(!info);
 	tasklet_schedule(&info->tlet);
 }
 
@@ -471,14 +476,26 @@ static void uart_flush_chars(struct tty_struct *tty)
 }
 
 static int
-uart_write(struct tty_struct *tty, const unsigned char * buf, int count)
+uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
-	struct circ_buf *circ = &state->info->xmit;
+	struct uart_port *port;
+	struct circ_buf *circ;
 	unsigned long flags;
 	int c, ret = 0;
 
+	/*
+	 * This means you called this function _after_ the port was
+	 * closed.  No cookie for you.
+	 */
+	if (!state || !state->info) {
+		WARN_ON(1);
+		return -EL3HLT;
+	}
+
+	port = state->port;
+	circ = &state->info->xmit;
+
 	if (!circ->buf)
 		return 0;
 
@@ -521,6 +538,15 @@ static void uart_flush_buffer(struct tty_struct *tty)
 	struct uart_port *port = state->port;
 	unsigned long flags;
 
+	/*
+	 * This means you called this function _after_ the port was
+	 * closed.  No cookie for you.
+	 */
+	if (!state || !state->info) {
+		WARN_ON(1);
+		return;
+	}
+
 	DPRINTK("uart_flush_buffer(%d) called\n", tty->index);
 
 	spin_lock_irqsave(&port->lock, flags);
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 43e67d6c29d4..60ea4a3f0713 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -820,7 +820,7 @@ static int __init sn_sal_module_init(void)
 	int retval;
 
 	if (!ia64_platform_is("sn2"))
-		return -ENODEV;
+		return 0;
 
 	printk(KERN_INFO "sn_console: Console driver init\n");
 
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4dd6865d32b0..b5c96e74a903 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -242,8 +242,10 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
 
 	down(&port->sem);
 
-	if (port->open_count == 0)
-		goto out;
+	if (port->open_count == 0) {
+		up(&port->sem);
+		return;
+	}
 
 	--port->open_count;
 	if (port->open_count == 0) {
@@ -260,10 +262,8 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
 		module_put(port->serial->type->driver.owner);
 	}
 
-	kref_put(&port->serial->kref, destroy_serial);
-
-out:
 	up(&port->sem);
+	kref_put(&port->serial->kref, destroy_serial);
 }
 
 static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count)
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index df8e5667b348..466042808daf 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -253,7 +253,7 @@ static void arcfb_lcd_update_page(struct arcfb_par *par, unsigned int upper,
 {
 	unsigned char *src;
 	unsigned int xindex, yindex, chipindex, linesize;
-	int i, count;
+	int i;
 	unsigned char val;
 	unsigned char bitmask, rightshift;
 
@@ -282,7 +282,6 @@ static void arcfb_lcd_update_page(struct arcfb_par *par, unsigned int upper,
 		}
 		ks108_writeb_data(par, chipindex, val);
 		left++;
-		count++;
 		if (bitmask == 0x80) {
 			bitmask = 1;
 			src++;
@@ -460,11 +459,11 @@ static ssize_t arcfb_write(struct file *file, const char __user *buf, size_t cou
 	inode = file->f_dentry->d_inode;
 	fbidx = iminor(inode);
 	info = registered_fb[fbidx];
-	par = info->par;
 
 	if (!info || !info->screen_base)
 		return -ENODEV;
 
+	par = info->par;
 	xres = info->var.xres;
 	fbmemlength = (xres * info->var.yres)/8;
 
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index bfc8a93b2c73..620c9a934e0e 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1326,7 +1326,7 @@ static int aty128_var_to_pll(u32 period_in_ps, struct aty128_pll *pll,
 	unsigned char post_dividers[] = {1,2,4,8,3,6,12};
 	u32 output_freq;
 	u32 vclk;        /* in .01 MHz */
-	int i;
+	int i = 0;
 	u32 n, d;
 
 	vclk = 100000000 / period_in_ps;	/* convert units to 10 kHz */
@@ -1340,15 +1340,16 @@ static int aty128_var_to_pll(u32 period_in_ps, struct aty128_pll *pll,
 	/* now, find an acceptable divider */
 	for (i = 0; i < sizeof(post_dividers); i++) {
 		output_freq = post_dividers[i] * vclk;
-		if (output_freq >= c.ppll_min && output_freq <= c.ppll_max)
+		if (output_freq >= c.ppll_min && output_freq <= c.ppll_max) {
+			pll->post_divider = post_dividers[i];
 			break;
+		}
 	}
 
 	/* calculate feedback divider */
 	n = c.ref_divider * output_freq;
 	d = c.ref_clk;
 
-	pll->post_divider = post_dividers[i];
 	pll->feedback_divider = round_div(n, d);
 	pll->vclk = vclk;
 
diff --git a/drivers/video/aty/radeon_monitor.c b/drivers/video/aty/radeon_monitor.c
index 7f9838dceab5..98c05bc0de44 100644
--- a/drivers/video/aty/radeon_monitor.c
+++ b/drivers/video/aty/radeon_monitor.c
@@ -396,6 +396,10 @@ static int __devinit radeon_parse_monitor_layout(struct radeonfb_info *rinfo,
 				s1[i] = *s;
 			i++;
 		}
+
+		if (i > 4)
+			i = 4;
+
 	} while (*s++);
 	if (second)
 		s2[i] = 0;
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index bd39bbd88d41..151fda8dded0 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -172,7 +172,7 @@ struct backlight_device *backlight_device_register(const char *name, void *devda
 
 	new_bd = kmalloc(sizeof(struct backlight_device), GFP_KERNEL);
 	if (unlikely(!new_bd))
-		return ERR_PTR(ENOMEM);
+		return ERR_PTR(-ENOMEM);
 
 	init_MUTEX(&new_bd->sem);
 	new_bd->props = bp;
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 9e32485ee7bb..86908a60c630 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -171,7 +171,7 @@ struct lcd_device *lcd_device_register(const char *name, void *devdata,
 
 	new_ld = kmalloc(sizeof(struct lcd_device), GFP_KERNEL);
 	if (unlikely(!new_ld))
-		return ERR_PTR(ENOMEM);
+		return ERR_PTR(-ENOMEM);
 
 	init_MUTEX(&new_ld->sem);
 	new_ld->props = lp;
diff --git a/drivers/video/imsttfb.c b/drivers/video/imsttfb.c
index ad416ae47596..7db42542eb19 100644
--- a/drivers/video/imsttfb.c
+++ b/drivers/video/imsttfb.c
@@ -1510,6 +1510,8 @@ imsttfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		default:
 			printk(KERN_INFO "imsttfb: Device 0x%x unknown, "
 					 "contact maintainer.\n", pdev->device);
+			release_mem_region(addr, size);
+			framebuffer_release(info);
 			return -ENODEV;
 	}
 
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c
index 6b8bd3cdf9c0..995b47c165a7 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/intelfb/intelfbdrv.c
@@ -1333,33 +1333,35 @@ intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	if (regno > 255)
 		return 1;
 
-	switch (dinfo->depth) {
-	case 8:
-		{
-			red >>= 8;
-			green >>= 8;
-			blue >>= 8;
+	if (dinfo->depth == 8) {
+		red >>= 8;
+		green >>= 8;
+		blue >>= 8;
+
+		intelfbhw_setcolreg(dinfo, regno, red, green, blue,
+				    transp);
+	}
 
-			intelfbhw_setcolreg(dinfo, regno, red, green, blue,
-					    transp);
+	if (regno < 16) {
+		switch (dinfo->depth) {
+		case 15:
+			dinfo->pseudo_palette[regno] = ((red & 0xf800) >>  1) |
+				((green & 0xf800) >>  6) |
+				((blue & 0xf800) >> 11);
+			break;
+		case 16:
+			dinfo->pseudo_palette[regno] = (red & 0xf800) |
+				((green & 0xfc00) >>  5) |
+				((blue  & 0xf800) >> 11);
+			break;
+		case 24:
+			dinfo->pseudo_palette[regno] = ((red & 0xff00) << 8) |
+				(green & 0xff00) |
+				((blue  & 0xff00) >> 8);
+			break;
 		}
-		break;
-	case 15:
-		dinfo->pseudo_palette[regno] = ((red & 0xf800) >>  1) |
-					       ((green & 0xf800) >>  6) |
-					       ((blue & 0xf800) >> 11);
-		break;
-	case 16:
-		dinfo->pseudo_palette[regno] = (red & 0xf800) |
-					       ((green & 0xfc00) >>  5) |
-					       ((blue  & 0xf800) >> 11);
-		break;
-	case 24:
-		dinfo->pseudo_palette[regno] = ((red & 0xff00) << 8) |
-					       (green & 0xff00) |
-					       ((blue  & 0xff00) >> 8);
-		break;
 	}
+
 	return 0;
 }
 
diff --git a/drivers/video/kyro/STG4000VTG.c b/drivers/video/kyro/STG4000VTG.c
index 3690b04190af..bd389709d234 100644
--- a/drivers/video/kyro/STG4000VTG.c
+++ b/drivers/video/kyro/STG4000VTG.c
@@ -17,7 +17,7 @@
 void DisableVGA(volatile STG4000REG __iomem *pSTGReg)
 {
 	u32 tmp;
-	volatile u32 count, i;
+	volatile u32 count = 0, i;
 
 	/* Reset the VGA registers */
 	tmp = STG_READ_REG(SoftwareReset);
diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c
index a2e201dc40f7..b961d5601bd9 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/neofb.c
@@ -486,10 +486,8 @@ static void vgaHWRestore(const struct fb_info *info,
 static inline int neo2200_sync(struct fb_info *info)
 {
 	struct neofb_par *par = info->par;
-	int waitcycles;
 
-	while (readl(&par->neo2200->bltStat) & 1)
-		waitcycles++;
+	while (readl(&par->neo2200->bltStat) & 1);
 	return 0;
 }
 
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index e5d0f92eeae3..feec47bdd479 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -588,6 +588,7 @@ s1d13xxxfb_probe(struct platform_device *pdev)
 		goto bail;
 	}
 
+	platform_set_drvdata(pdev, info);
 	default_par = info->par;
 	default_par->regs = ioremap_nocache(pdev->resource[1].start,
 			pdev->resource[1].end - pdev->resource[1].start +1);
@@ -638,8 +639,6 @@ s1d13xxxfb_probe(struct platform_device *pdev)
 		goto bail;
 	}
 
-	platform_set_drvdata(pdev, info);
-
 	printk(KERN_INFO "fb%d: %s frame buffer device\n",
 	       info->node, info->fix.id);
 
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index ab727eaa7f43..10e6b3aab9ea 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -2021,8 +2021,8 @@ static int __devinit savagefb_probe (struct pci_dev* dev,
 #if defined(CONFIG_FB_SAVAGE_I2C)
 	savagefb_create_i2c_busses(info);
 	savagefb_probe_i2c_connector(info, &par->edid);
-	kfree(par->edid);
 	fb_edid_to_monspecs(par->edid, &info->monspecs);
+	kfree(par->edid);
 	fb_videomode_to_modelist(info->monspecs.modedb,
 				 info->monspecs.modedb_len,
 				 &info->modelist);
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 3e7baf4c9fa8..5e5328d682db 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -786,28 +786,32 @@ static int tdfxfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	if (regno >= info->cmap.len || regno > 255) return 1;
    
 	switch (info->fix.visual) {
-		case FB_VISUAL_PSEUDOCOLOR:
-			rgbcol =(((u32)red   & 0xff00) << 8) |
-				(((u32)green & 0xff00) << 0) |
-				(((u32)blue  & 0xff00) >> 8);
-			do_setpalentry(par, regno, rgbcol);
-			break;
-		/* Truecolor has no hardware color palettes. */
-		case FB_VISUAL_TRUECOLOR:
+	case FB_VISUAL_PSEUDOCOLOR:
+		rgbcol =(((u32)red   & 0xff00) << 8) |
+			(((u32)green & 0xff00) << 0) |
+			(((u32)blue  & 0xff00) >> 8);
+		do_setpalentry(par, regno, rgbcol);
+		break;
+	/* Truecolor has no hardware color palettes. */
+	case FB_VISUAL_TRUECOLOR:
+		if (regno < 16) {
 			rgbcol = (CNVT_TOHW( red, info->var.red.length) <<
 				  info->var.red.offset) |
-				 (CNVT_TOHW( green, info->var.green.length) <<
-				  info->var.green.offset) |
-				 (CNVT_TOHW( blue, info->var.blue.length) <<
-				  info->var.blue.offset) |
-				 (CNVT_TOHW( transp, info->var.transp.length) <<
-				  info->var.transp.offset);
-				par->palette[regno] = rgbcol;
-			break;
-		default:
-			DPRINTK("bad depth %u\n", info->var.bits_per_pixel);
-			break;
+				(CNVT_TOHW( green, info->var.green.length) <<
+				 info->var.green.offset) |
+				(CNVT_TOHW( blue, info->var.blue.length) <<
+				 info->var.blue.offset) |
+				(CNVT_TOHW( transp, info->var.transp.length) <<
+				 info->var.transp.offset);
+			par->palette[regno] = rgbcol;
+		}
+
+		break;
+	default:
+		DPRINTK("bad depth %u\n", info->var.bits_per_pixel);
+		break;
 	}
+
 	return 0;
 }