Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (166 commits) Revert "ax25: zero length frame filtering in AX25" Revert "netrom: zero length frame filtering in NetRom" cfg80211: default CONFIG_WIRELESS_OLD_REGULATORY to n mac80211/iwlwifi: move virtual A-MDPU queue bookkeeping to iwlwifi mac80211: fix aggregation to not require queue stop mac80211: add skb length sanity checking mac80211: unify and fix TX aggregation start mac80211: clean up __ieee80211_tx args mac80211: rework the pending packets code mac80211: fix A-MPDU queue assignment mac80211: rewrite fragmentation iwlwifi: show current driver status in user readable format b43: Add BCM4307 PCI-ID cfg80211: fix locking in nl80211_set_wiphy mac80211: fix RX path ath5k: properly drop packets from ops->tx ar9170: single module build ath9k: fix dma mapping leak of rx buffer upon rmmod rt2x00: New USB ID for rt73usb ath5k: warn and correct rate for unknown hw rate indexes ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2009-03-27 18:35:03 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2009-03-27 18:35:03 -0700
commit: 5d80f8e5a9dc9c9a94d4aeaa567e219a808b8a4a (patch)
tree: 357258d77e2153ef7409926773655c5f8775a1f3 /drivers
parent: 7b616c8a2f5c8507b4aed6907336ec5b85803a39 (diff)
parent: 0870352bc6e0dee485c86a0c99dd60e7089c8917 (diff)
download: linux-5d80f8e5a9dc9c9a94d4aeaa567e219a808b8a4a.tar.bz2
121 files changed, 9566 insertions, 1329 deletions
diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c
index 5b91a85fe107..4f08bd995836 100644
--- a/drivers/net/3c503.c
+++ b/drivers/net/3c503.c
@@ -353,9 +353,6 @@ el2_probe1(struct net_device *dev, int ioaddr)
 
     dev->netdev_ops = &el2_netdev_ops;
     dev->ethtool_ops = &netdev_ethtool_ops;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-    dev->poll_controller = eip_poll;
-#endif
 
     retval = register_netdev(dev);
     if (retval)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e5ffc1c606c1..f062b424704e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -972,6 +972,14 @@ config ENC28J60_WRITEVERIFY
 	  Enable the verify after the buffer write useful for debugging purpose.
 	  If unsure, say N.
 
+config ETHOC
+	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
+	depends on NET_ETHERNET
+	select MII
+	select PHYLIB
+	help
+	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
+
 config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 758ecdf4c820..98409c9dd445 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -230,6 +230,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
 pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
 obj-$(CONFIG_MLX4_CORE) += mlx4/
 obj-$(CONFIG_ENC28J60) += enc28j60.o
+obj-$(CONFIG_ETHOC) += ethoc.o
 
 obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
 
diff --git a/drivers/net/ac3200.c b/drivers/net/ac3200.c
index 071a851a2ea1..eac73382c087 100644
--- a/drivers/net/ac3200.c
+++ b/drivers/net/ac3200.c
@@ -143,6 +143,22 @@ out:
 }
 #endif
 
+static const struct net_device_ops ac_netdev_ops = {
+	.ndo_open		= ac_open,
+	.ndo_stop 		= ac_close_card,
+
+	.ndo_start_xmit		= ei_start_xmit,
+	.ndo_tx_timeout		= ei_tx_timeout,
+	.ndo_get_stats		= ei_get_stats,
+	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= ei_poll,
+#endif
+};
+
 static int __init ac_probe1(int ioaddr, struct net_device *dev)
 {
 	int i, retval;
@@ -253,11 +269,7 @@ static int __init ac_probe1(int ioaddr, struct net_device *dev)
 	ei_status.block_output = &ac_block_output;
 	ei_status.get_8390_hdr = &ac_get_8390_hdr;
 
-	dev->open = &ac_open;
-	dev->stop = &ac_close_card;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = ei_poll;
-#endif
+	dev->netdev_ops = &ac_netdev_ops;
 	NS8390_init(dev, 0);
 
 	retval = register_netdev(dev);
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 54819a34ba0a..7f8325419803 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -171,7 +171,6 @@ static unsigned int cops_debug = COPS_DEBUG;
 
 struct cops_local
 {
-        struct net_device_stats stats;
         int board;			/* Holds what board type is. */
 	int nodeid;			/* Set to 1 once have nodeid. */
         unsigned char node_acquire;	/* Node ID when acquired. */
@@ -197,7 +196,6 @@ static int  cops_send_packet (struct sk_buff *skb, struct net_device *dev);
 static void set_multicast_list (struct net_device *dev);
 static int  cops_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
 static int  cops_close (struct net_device *dev);
-static struct net_device_stats *cops_get_stats (struct net_device *dev);
 
 static void cleanup_card(struct net_device *dev)
 {
@@ -260,6 +258,15 @@ out:
 	return ERR_PTR(err);
 }
 
+static const struct net_device_ops cops_netdev_ops = {
+	.ndo_open               = cops_open,
+        .ndo_stop               = cops_close,
+	.ndo_start_xmit   	= cops_send_packet,
+	.ndo_tx_timeout		= cops_timeout,
+        .ndo_do_ioctl           = cops_ioctl,
+	.ndo_set_multicast_list = set_multicast_list,
+};
+
 /*
  *      This is the real probe routine. Linux has a history of friendly device
  *      probes on the ISA bus. A good device probes avoids doing writes, and
@@ -333,16 +340,9 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr)
 	/* Copy local board variable to lp struct. */
 	lp->board               = board;
 
-	dev->hard_start_xmit    = cops_send_packet;
-	dev->tx_timeout		= cops_timeout;
+	dev->netdev_ops 	= &cops_netdev_ops;
 	dev->watchdog_timeo	= HZ * 2;
 
-        dev->get_stats          = cops_get_stats;
-	dev->open               = cops_open;
-        dev->stop               = cops_close;
-        dev->do_ioctl           = cops_ioctl;
-	dev->set_multicast_list = set_multicast_list;
-        dev->mc_list            = NULL;
 
 	/* Tell the user where the card is and what mode we're in. */
 	if(board==DAYNA)
@@ -797,7 +797,7 @@ static void cops_rx(struct net_device *dev)
         {
                 printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n",
 			dev->name);
-                lp->stats.rx_dropped++;
+                dev->stats.rx_dropped++;
                 while(pkt_len--)        /* Discard packet */
                         inb(ioaddr);
                 spin_unlock_irqrestore(&lp->lock, flags);
@@ -819,7 +819,7 @@ static void cops_rx(struct net_device *dev)
         {
 		printk(KERN_WARNING "%s: Bad packet length of %d bytes.\n", 
 			dev->name, pkt_len);
-                lp->stats.tx_errors++;
+                dev->stats.tx_errors++;
                 dev_kfree_skb_any(skb);
                 return;
         }
@@ -836,7 +836,7 @@ static void cops_rx(struct net_device *dev)
         if(rsp_type != LAP_RESPONSE)
         {
                 printk(KERN_WARNING "%s: Bad packet type %d.\n", dev->name, rsp_type);
-                lp->stats.tx_errors++;
+                dev->stats.tx_errors++;
                 dev_kfree_skb_any(skb);
                 return;
         }
@@ -846,8 +846,8 @@ static void cops_rx(struct net_device *dev)
         skb_reset_transport_header(skb);    /* Point to data (Skip header). */
 
         /* Update the counters. */
-        lp->stats.rx_packets++;
-        lp->stats.rx_bytes += skb->len;
+        dev->stats.rx_packets++;
+        dev->stats.rx_bytes += skb->len;
 
         /* Send packet to a higher place. */
         netif_rx(skb);
@@ -858,7 +858,7 @@ static void cops_timeout(struct net_device *dev)
         struct cops_local *lp = netdev_priv(dev);
         int ioaddr = dev->base_addr;
 
-	lp->stats.tx_errors++;
+	dev->stats.tx_errors++;
         if(lp->board==TANGENT)
         {
 		if((inb(ioaddr+TANG_CARD_STATUS)&TANG_TX_READY)==0)
@@ -916,8 +916,8 @@ static int cops_send_packet(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&lp->lock, flags);	/* Restore interrupts. */
 
 	/* Done sending packet, update counters and cleanup. */
-	lp->stats.tx_packets++;
-	lp->stats.tx_bytes += skb->len;
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
 	dev->trans_start = jiffies;
 	dev_kfree_skb (skb);
         return 0;
@@ -986,15 +986,6 @@ static int cops_close(struct net_device *dev)
         return 0;
 }
 
-/*
- *      Get the current statistics.
- *      This may be called with the card open or closed.
- */
-static struct net_device_stats *cops_get_stats(struct net_device *dev)
-{
-        struct cops_local *lp = netdev_priv(dev);
-        return &lp->stats;
-}
 
 #ifdef MODULE
 static struct net_device *cops_dev;
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index dc4d49605603..78cc71469136 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -261,7 +261,6 @@ static unsigned char *ltdmacbuf;
 
 struct ltpc_private
 {
-	struct net_device_stats stats;
 	struct atalk_addr my_addr;
 };
 
@@ -699,7 +698,6 @@ static int do_read(struct net_device *dev, void *cbuf, int cbuflen,
 static struct timer_list ltpc_timer;
 
 static int ltpc_xmit(struct sk_buff *skb, struct net_device *dev);
-static struct net_device_stats *ltpc_get_stats(struct net_device *dev);
 
 static int read_30 ( struct net_device *dev)
 {
@@ -726,8 +724,6 @@ static int sendup_buffer (struct net_device *dev)
 	int dnode, snode, llaptype, len; 
 	int sklen;
 	struct sk_buff *skb;
-	struct ltpc_private *ltpc_priv = netdev_priv(dev);
-	struct net_device_stats *stats = &ltpc_priv->stats;
 	struct lt_rcvlap *ltc = (struct lt_rcvlap *) ltdmacbuf;
 
 	if (ltc->command != LT_RCVLAP) {
@@ -779,8 +775,8 @@ static int sendup_buffer (struct net_device *dev)
 
 	skb_reset_transport_header(skb);
 
-	stats->rx_packets++;
-	stats->rx_bytes+=skb->len;
+	dev->stats.rx_packets++;
+	dev->stats.rx_bytes += skb->len;
 
 	/* toss it onwards */
 	netif_rx(skb);
@@ -904,10 +900,6 @@ static int ltpc_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* in kernel 1.3.xx, on entry skb->data points to ddp header,
 	 * and skb->len is the length of the ddp data + ddp header
 	 */
-
-	struct ltpc_private *ltpc_priv = netdev_priv(dev);
-	struct net_device_stats *stats = &ltpc_priv->stats;
-
 	int i;
 	struct lt_sendlap cbuf;
 	unsigned char *hdr;
@@ -936,20 +928,13 @@ static int ltpc_xmit(struct sk_buff *skb, struct net_device *dev)
 		printk("\n");
 	}
 
-	stats->tx_packets++;
-	stats->tx_bytes+=skb->len;
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
 
 	dev_kfree_skb(skb);
 	return 0;
 }
 
-static struct net_device_stats *ltpc_get_stats(struct net_device *dev)
-{
-	struct ltpc_private *ltpc_priv = netdev_priv(dev);
-	struct net_device_stats *stats = &ltpc_priv->stats;
-	return stats;
-}
-
 /* initialization stuff */
   
 static int __init ltpc_probe_dma(int base, int dma)
@@ -1027,6 +1012,12 @@ static int __init ltpc_probe_dma(int base, int dma)
 	return (want & 2) ? 3 : 1;
 }
 
+static const struct net_device_ops ltpc_netdev = {
+	.ndo_start_xmit		= ltpc_xmit,
+	.ndo_do_ioctl		= ltpc_ioctl,
+	.ndo_set_multicast_list = set_multicast_list,
+};
+
 struct net_device * __init ltpc_probe(void)
 {
 	struct net_device *dev;
@@ -1133,14 +1124,7 @@ struct net_device * __init ltpc_probe(void)
 	else
 		printk(KERN_INFO "Apple/Farallon LocalTalk-PC card at %03x, DMA%d.  Using polled mode.\n",io,dma);
 
-	/* Fill in the fields of the device structure with ethernet-generic values. */
-	dev->hard_start_xmit = ltpc_xmit;
-	dev->get_stats = ltpc_get_stats;
-
-	/* add the ltpc-specific things */
-	dev->do_ioctl = &ltpc_ioctl;
-
-	dev->set_multicast_list = &set_multicast_list;
+	dev->netdev_ops = &ltpc_netdev;
 	dev->mc_list = NULL;
 	dev->base_addr = io;
 	dev->irq = irq;
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index ced70799b898..18b566ad4fd1 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -249,6 +249,17 @@ out:
 	return ERR_PTR(err);
 }
 
+static const struct net_device_ops at1700_netdev_ops = {
+	.ndo_open		= net_open,
+	.ndo_stop		= net_close,
+	.ndo_start_xmit 	= net_send_packet,
+	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_tx_timeout 	= net_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /* The Fujitsu datasheet suggests that the NIC be probed for by checking its
    "signature", the default bit pattern after a reset.  This *doesn't* work --
    there is no way to reset the bus interface without a complete power-cycle!
@@ -448,13 +459,7 @@ found:
 	if (net_debug)
 		printk(version);
 
-	memset(lp, 0, sizeof(struct net_local));
-
-	dev->open		= net_open;
-	dev->stop		= net_close;
-	dev->hard_start_xmit = net_send_packet;
-	dev->set_multicast_list = &set_rx_mode;
-	dev->tx_timeout = net_tx_timeout;
+	dev->netdev_ops = &at1700_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	spin_lock_init(&lp->lock);
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index f901fee79a20..9b75aa630062 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -16,6 +16,7 @@
  */
 
 #include "be.h"
+#include <asm/div64.h>
 
 MODULE_VERSION(DRV_VER);
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
@@ -290,6 +291,17 @@ static struct net_device_stats *be_get_stats(struct net_device *dev)
 	return &adapter->stats.net_stats;
 }
 
+static u32 be_calc_rate(u64 bytes, unsigned long ticks)
+{
+	u64 rate = bytes;
+
+	do_div(rate, ticks / HZ);
+	rate <<= 3;			/* bytes/sec -> bits/sec */
+	do_div(rate, 1000000ul);	/* MB/Sec */
+
+	return rate;
+}
+
 static void be_tx_rate_update(struct be_adapter *adapter)
 {
 	struct be_drvr_stats *stats = drvr_stats(adapter);
@@ -303,11 +315,9 @@ static void be_tx_rate_update(struct be_adapter *adapter)
 
 	/* Update tx rate once in two seconds */
 	if ((now - stats->be_tx_jiffies) > 2 * HZ) {
-		u32 r;
-		r = (stats->be_tx_bytes - stats->be_tx_bytes_prev) /
-			((now - stats->be_tx_jiffies) / HZ);
-		r = r / 1000000;			/* M bytes/s */
-		stats->be_tx_rate = r * 8;	/* M bits/s */
+		stats->be_tx_rate = be_calc_rate(stats->be_tx_bytes
+						  - stats->be_tx_bytes_prev,
+						 now - stats->be_tx_jiffies);
 		stats->be_tx_jiffies = now;
 		stats->be_tx_bytes_prev = stats->be_tx_bytes;
 	}
@@ -599,7 +609,6 @@ static void be_rx_rate_update(struct be_adapter *adapter)
 {
 	struct be_drvr_stats *stats = drvr_stats(adapter);
 	ulong now = jiffies;
-	u32 rate;
 
 	/* Wrapped around */
 	if (time_before(now, stats->be_rx_jiffies)) {
@@ -611,10 +620,9 @@ static void be_rx_rate_update(struct be_adapter *adapter)
 	if ((now - stats->be_rx_jiffies) < 2 * HZ)
 		return;
 
-	rate = (stats->be_rx_bytes - stats->be_rx_bytes_prev) /
-		((now - stats->be_rx_jiffies) / HZ);
-	rate = rate / 1000000;	/* MB/Sec */
-	stats->be_rx_rate = rate * 8; 	/* Mega Bits/Sec */
+	stats->be_rx_rate = be_calc_rate(stats->be_rx_bytes
+					  - stats->be_rx_bytes_prev,
+					 now - stats->be_rx_jiffies);
 	stats->be_rx_jiffies = now;
 	stats->be_rx_bytes_prev = stats->be_rx_bytes;
 }
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index ff6497658a45..7433b88eed7e 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -501,6 +501,21 @@ static void net_poll_controller(struct net_device *dev)
 }
 #endif
 
+static const struct net_device_ops net_ops = {
+	.ndo_open		= net_open,
+	.ndo_stop		= net_close,
+	.ndo_tx_timeout		= net_timeout,
+	.ndo_start_xmit 	= net_send_packet,
+	.ndo_get_stats		= net_get_stats,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_mac_address 	= set_mac_address,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= net_poll_controller,
+#endif
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /* This is the real probe routine.  Linux has a history of friendly device
    probes on the ISA bus.  A good device probes avoids doing writes, and
    verifies that the correct device exists and functions.
@@ -843,17 +858,8 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 	/* print the ethernet address. */
 	printk(", MAC %pM", dev->dev_addr);
 
-	dev->open		= net_open;
-	dev->stop		= net_close;
-	dev->tx_timeout		= net_timeout;
-	dev->watchdog_timeo	= HZ;
-	dev->hard_start_xmit 	= net_send_packet;
-	dev->get_stats		= net_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-	dev->set_mac_address 	= set_mac_address;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller	= net_poll_controller;
-#endif
+	dev->netdev_ops	= &net_ops;
+	dev->watchdog_timeo = HZ;
 
 	printk("\n");
 	if (net_debug)
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index 71eaa431371d..714df2b675e6 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -85,6 +85,8 @@ struct fl_pg_chunk {
 	struct page *page;
 	void *va;
 	unsigned int offset;
+	u64 *p_cnt;
+	DECLARE_PCI_UNMAP_ADDR(mapping);
 };
 
 struct rx_desc;
@@ -101,6 +103,7 @@ struct sge_fl {                     /* SGE per free-buffer list state */
 	struct fl_pg_chunk pg_chunk;/* page chunk cache */
 	unsigned int use_pages;     /* whether FL uses pages or sk_buffs */
 	unsigned int order;	    /* order of page allocations */
+	unsigned int alloc_size;    /* size of allocated buffer */
 	struct rx_desc *desc;       /* address of HW Rx descriptor ring */
 	struct rx_sw_desc *sdesc;   /* address of SW Rx descriptor ring */
 	dma_addr_t   phys_addr;     /* physical address of HW ring start */
@@ -291,6 +294,7 @@ void t3_os_link_fault_handler(struct adapter *adapter, int port_id);
 
 void t3_sge_start(struct adapter *adap);
 void t3_sge_stop(struct adapter *adap);
+void t3_start_sge_timers(struct adapter *adap);
 void t3_stop_sge_timers(struct adapter *adap);
 void t3_free_sge_resources(struct adapter *adap);
 void t3_sge_err_intr_handler(struct adapter *adapter);
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index 9ee021e750c8..e508dc32f3ec 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -191,7 +191,8 @@ struct mdio_ops {
 };
 
 struct adapter_info {
-	unsigned char nports;	/* # of ports */
+	unsigned char nports0;        /* # of ports on channel 0 */
+	unsigned char nports1;        /* # of ports on channel 1 */
 	unsigned char phy_base_addr;	/* MDIO PHY base address */
 	unsigned int gpio_out;	/* GPIO output settings */
 	unsigned char gpio_intr[MAX_NPORTS]; /* GPIO PHY IRQ pins */
@@ -422,6 +423,7 @@ struct adapter_params {
 	unsigned short b_wnd[NCCTRL_WIN];
 
 	unsigned int nports;	/* # of ethernet ports */
+	unsigned int chan_map;  /* bitmap of in-use Tx channels */
 	unsigned int stats_update_period;	/* MAC stats accumulation period */
 	unsigned int linkpoll_period;	/* link poll period in 0.1s */
 	unsigned int rev;	/* chip revision */
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index d8be89621bf7..2c2aaa741450 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -602,7 +602,6 @@ static int setup_sge_qsets(struct adapter *adap)
 				&adap->params.sge.qset[qset_idx], ntxq, dev,
 				netdev_get_tx_queue(dev, j));
 			if (err) {
-				t3_stop_sge_timers(adap);
 				t3_free_sge_resources(adap);
 				return err;
 			}
@@ -1046,6 +1045,8 @@ static int cxgb_up(struct adapter *adap)
 		setup_rss(adap);
 		if (!(adap->flags & NAPI_INIT))
 			init_napi(adap);
+
+		t3_start_sge_timers(adap);
 		adap->flags |= FULL_INIT_DONE;
 	}
 
@@ -2870,6 +2871,9 @@ static void t3_io_resume(struct pci_dev *pdev)
 {
 	struct adapter *adapter = pci_get_drvdata(pdev);
 
+	CH_ALERT(adapter, "adapter recovering, PEX ERR 0x%x\n",
+		 t3_read_reg(adapter, A_PCIE_PEX_ERR));
+
 	t3_resume_ports(adapter);
 }
 
@@ -3002,7 +3006,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 	static int version_printed;
 
 	int i, err, pci_using_dac = 0;
-	unsigned long mmio_start, mmio_len;
+	resource_size_t mmio_start, mmio_len;
 	const struct adapter_info *ai;
 	struct adapter *adapter = NULL;
 	struct port_info *pi;
@@ -3082,7 +3086,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 	INIT_WORK(&adapter->fatal_error_handler_task, fatal_error_task);
 	INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task);
 
-	for (i = 0; i < ai->nports; ++i) {
+	for (i = 0; i < ai->nports0 + ai->nports1; ++i) {
 		struct net_device *netdev;
 
 		netdev = alloc_etherdev_mq(sizeof(struct port_info), SGE_QSETS);
@@ -3172,7 +3176,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 
 out_free_dev:
 	iounmap(adapter->regs);
-	for (i = ai->nports - 1; i >= 0; --i)
+	for (i = ai->nports0 + ai->nports1 - 1; i >= 0; --i)
 		if (adapter->port[i])
 			free_netdev(adapter->port[i]);
 
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index a7555cb3fa4a..26d3587f3399 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -50,6 +50,7 @@
 #define SGE_RX_COPY_THRES  256
 #define SGE_RX_PULL_LEN    128
 
+#define SGE_PG_RSVD SMP_CACHE_BYTES
 /*
  * Page chunk size for FL0 buffers if FL0 is to be populated with page chunks.
  * It must be a divisor of PAGE_SIZE.  If set to 0 FL0 will use sk_buffs
@@ -57,8 +58,10 @@
  */
 #define FL0_PG_CHUNK_SIZE  2048
 #define FL0_PG_ORDER 0
+#define FL0_PG_ALLOC_SIZE (PAGE_SIZE << FL0_PG_ORDER)
 #define FL1_PG_CHUNK_SIZE (PAGE_SIZE > 8192 ? 16384 : 8192)
 #define FL1_PG_ORDER (PAGE_SIZE > 8192 ? 0 : 1)
+#define FL1_PG_ALLOC_SIZE (PAGE_SIZE << FL1_PG_ORDER)
 
 #define SGE_RX_DROP_THRES 16
 #define RX_RECLAIM_PERIOD (HZ/4)
@@ -345,13 +348,21 @@ static inline int should_restart_tx(const struct sge_txq *q)
 	return q->in_use - r < (q->size >> 1);
 }
 
-static void clear_rx_desc(const struct sge_fl *q, struct rx_sw_desc *d)
+static void clear_rx_desc(struct pci_dev *pdev, const struct sge_fl *q,
+			  struct rx_sw_desc *d)
 {
-	if (q->use_pages) {
-		if (d->pg_chunk.page)
-			put_page(d->pg_chunk.page);
+	if (q->use_pages && d->pg_chunk.page) {
+		(*d->pg_chunk.p_cnt)--;
+		if (!*d->pg_chunk.p_cnt)
+			pci_unmap_page(pdev,
+				       pci_unmap_addr(&d->pg_chunk, mapping),
+				       q->alloc_size, PCI_DMA_FROMDEVICE);
+
+		put_page(d->pg_chunk.page);
 		d->pg_chunk.page = NULL;
 	} else {
+		pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr),
+				 q->buf_size, PCI_DMA_FROMDEVICE);
 		kfree_skb(d->skb);
 		d->skb = NULL;
 	}
@@ -372,9 +383,8 @@ static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
 	while (q->credits--) {
 		struct rx_sw_desc *d = &q->sdesc[cidx];
 
-		pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr),
-				 q->buf_size, PCI_DMA_FROMDEVICE);
-		clear_rx_desc(q, d);
+
+		clear_rx_desc(pdev, q, d);
 		if (++cidx == q->size)
 			cidx = 0;
 	}
@@ -417,18 +427,39 @@ static inline int add_one_rx_buf(void *va, unsigned int len,
 	return 0;
 }
 
-static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp,
+static inline int add_one_rx_chunk(dma_addr_t mapping, struct rx_desc *d,
+				   unsigned int gen)
+{
+	d->addr_lo = cpu_to_be32(mapping);
+	d->addr_hi = cpu_to_be32((u64) mapping >> 32);
+	wmb();
+	d->len_gen = cpu_to_be32(V_FLD_GEN1(gen));
+	d->gen2 = cpu_to_be32(V_FLD_GEN2(gen));
+	return 0;
+}
+
+static int alloc_pg_chunk(struct adapter *adapter, struct sge_fl *q,
+			  struct rx_sw_desc *sd, gfp_t gfp,
 			  unsigned int order)
 {
 	if (!q->pg_chunk.page) {
+		dma_addr_t mapping;
+
 		q->pg_chunk.page = alloc_pages(gfp, order);
 		if (unlikely(!q->pg_chunk.page))
 			return -ENOMEM;
 		q->pg_chunk.va = page_address(q->pg_chunk.page);
+		q->pg_chunk.p_cnt = q->pg_chunk.va + (PAGE_SIZE << order) -
+				    SGE_PG_RSVD;
 		q->pg_chunk.offset = 0;
+		mapping = pci_map_page(adapter->pdev, q->pg_chunk.page,
+				       0, q->alloc_size, PCI_DMA_FROMDEVICE);
+		pci_unmap_addr_set(&q->pg_chunk, mapping, mapping);
 	}
 	sd->pg_chunk = q->pg_chunk;
 
+	prefetch(sd->pg_chunk.p_cnt);
+
 	q->pg_chunk.offset += q->buf_size;
 	if (q->pg_chunk.offset == (PAGE_SIZE << order))
 		q->pg_chunk.page = NULL;
@@ -436,6 +467,12 @@ static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp,
 		q->pg_chunk.va += q->buf_size;
 		get_page(q->pg_chunk.page);
 	}
+
+	if (sd->pg_chunk.offset == 0)
+		*sd->pg_chunk.p_cnt = 1;
+	else
+		*sd->pg_chunk.p_cnt += 1;
+
 	return 0;
 }
 
@@ -460,35 +497,43 @@ static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
  */
 static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
 {
-	void *buf_start;
 	struct rx_sw_desc *sd = &q->sdesc[q->pidx];
 	struct rx_desc *d = &q->desc[q->pidx];
 	unsigned int count = 0;
 
 	while (n--) {
+		dma_addr_t mapping;
 		int err;
 
 		if (q->use_pages) {
-			if (unlikely(alloc_pg_chunk(q, sd, gfp, q->order))) {
+			if (unlikely(alloc_pg_chunk(adap, q, sd, gfp,
+						    q->order))) {
 nomem:				q->alloc_failed++;
 				break;
 			}
-			buf_start = sd->pg_chunk.va;
+			mapping = pci_unmap_addr(&sd->pg_chunk, mapping) +
+						 sd->pg_chunk.offset;
+			pci_unmap_addr_set(sd, dma_addr, mapping);
+
+			add_one_rx_chunk(mapping, d, q->gen);
+			pci_dma_sync_single_for_device(adap->pdev, mapping,
+						q->buf_size - SGE_PG_RSVD,
+						PCI_DMA_FROMDEVICE);
 		} else {
-			struct sk_buff *skb = alloc_skb(q->buf_size, gfp);
+			void *buf_start;
 
+			struct sk_buff *skb = alloc_skb(q->buf_size, gfp);
 			if (!skb)
 				goto nomem;
 
 			sd->skb = skb;
 			buf_start = skb->data;
-		}
-
-		err = add_one_rx_buf(buf_start, q->buf_size, d, sd, q->gen,
-				     adap->pdev);
-		if (unlikely(err)) {
-			clear_rx_desc(q, sd);
-			break;
+			err = add_one_rx_buf(buf_start, q->buf_size, d, sd,
+					     q->gen, adap->pdev);
+			if (unlikely(err)) {
+				clear_rx_desc(adap->pdev, q, sd);
+				break;
+			}
 		}
 
 		d++;
@@ -795,19 +840,19 @@ static struct sk_buff *get_packet_pg(struct adapter *adap, struct sge_fl *fl,
 	struct sk_buff *newskb, *skb;
 	struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
 
-	newskb = skb = q->pg_skb;
+	dma_addr_t dma_addr = pci_unmap_addr(sd, dma_addr);
 
+	newskb = skb = q->pg_skb;
 	if (!skb && (len <= SGE_RX_COPY_THRES)) {
 		newskb = alloc_skb(len, GFP_ATOMIC);
 		if (likely(newskb != NULL)) {
 			__skb_put(newskb, len);
-			pci_dma_sync_single_for_cpu(adap->pdev,
-					    pci_unmap_addr(sd, dma_addr), len,
+			pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len,
 					    PCI_DMA_FROMDEVICE);
 			memcpy(newskb->data, sd->pg_chunk.va, len);
-			pci_dma_sync_single_for_device(adap->pdev,
-					    pci_unmap_addr(sd, dma_addr), len,
-					    PCI_DMA_FROMDEVICE);
+			pci_dma_sync_single_for_device(adap->pdev, dma_addr,
+						       len,
+						       PCI_DMA_FROMDEVICE);
 		} else if (!drop_thres)
 			return NULL;
 recycle:
@@ -820,16 +865,25 @@ recycle:
 	if (unlikely(q->rx_recycle_buf || (!skb && fl->credits <= drop_thres)))
 		goto recycle;
 
+	prefetch(sd->pg_chunk.p_cnt);
+
 	if (!skb)
 		newskb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);
+
 	if (unlikely(!newskb)) {
 		if (!drop_thres)
 			return NULL;
 		goto recycle;
 	}
 
-	pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
-			 fl->buf_size, PCI_DMA_FROMDEVICE);
+	pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len,
+				    PCI_DMA_FROMDEVICE);
+	(*sd->pg_chunk.p_cnt)--;
+	if (!*sd->pg_chunk.p_cnt)
+		pci_unmap_page(adap->pdev,
+			       pci_unmap_addr(&sd->pg_chunk, mapping),
+			       fl->alloc_size,
+			       PCI_DMA_FROMDEVICE);
 	if (!skb) {
 		__skb_put(newskb, SGE_RX_PULL_LEN);
 		memcpy(newskb->data, sd->pg_chunk.va, SGE_RX_PULL_LEN);
@@ -1089,7 +1143,7 @@ static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
 	struct tx_desc *d = &q->desc[pidx];
 	struct cpl_tx_pkt *cpl = (struct cpl_tx_pkt *)d;
 
-	cpl->len = htonl(skb->len | 0x80000000);
+	cpl->len = htonl(skb->len);
 	cntrl = V_TXPKT_INTF(pi->port_id);
 
 	if (vlan_tx_tag_present(skb) && pi->vlan_grp)
@@ -1958,8 +2012,8 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
 	skb_pull(skb, sizeof(*p) + pad);
 	skb->protocol = eth_type_trans(skb, adap->port[p->iff]);
 	pi = netdev_priv(skb->dev);
-	if ((pi->rx_offload & T3_RX_CSUM) && p->csum_valid && p->csum == htons(0xffff) &&
-	    !p->fragment) {
+	if ((pi->rx_offload & T3_RX_CSUM) && p->csum_valid &&
+	    p->csum == htons(0xffff) && !p->fragment) {
 		qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 	} else
@@ -2034,10 +2088,19 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 	fl->credits--;
 
 	len -= offset;
-	pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
-			 fl->buf_size, PCI_DMA_FROMDEVICE);
+	pci_dma_sync_single_for_cpu(adap->pdev,
+				    pci_unmap_addr(sd, dma_addr),
+				    fl->buf_size - SGE_PG_RSVD,
+				    PCI_DMA_FROMDEVICE);
 
-	prefetch(&qs->lro_frag_tbl);
+	(*sd->pg_chunk.p_cnt)--;
+	if (!*sd->pg_chunk.p_cnt)
+		pci_unmap_page(adap->pdev,
+			       pci_unmap_addr(&sd->pg_chunk, mapping),
+			       fl->alloc_size,
+			       PCI_DMA_FROMDEVICE);
+
+	prefetch(qs->lro_va);
 
 	rx_frag += nr_frags;
 	rx_frag->page = sd->pg_chunk.page;
@@ -2047,6 +2110,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 	qs->lro_frag_tbl.nr_frags++;
 	qs->lro_frag_tbl.len = frag_len;
 
+
 	if (!complete)
 		return;
 
@@ -2236,6 +2300,8 @@ no_mem:
 			if (fl->use_pages) {
 				void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
 
+				prefetch(&qs->lro_frag_tbl);
+
 				prefetch(addr);
 #if L1_CACHE_BYTES < 128
 				prefetch(addr + L1_CACHE_BYTES);
@@ -2972,21 +3038,23 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 	q->fl[1].use_pages = FL1_PG_CHUNK_SIZE > 0;
 	q->fl[0].order = FL0_PG_ORDER;
 	q->fl[1].order = FL1_PG_ORDER;
+	q->fl[0].alloc_size = FL0_PG_ALLOC_SIZE;
+	q->fl[1].alloc_size = FL1_PG_ALLOC_SIZE;
 
 	spin_lock_irq(&adapter->sge.reg_lock);
 
 	/* FL threshold comparison uses < */
 	ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx,
 				   q->rspq.phys_addr, q->rspq.size,
-				   q->fl[0].buf_size, 1, 0);
+				   q->fl[0].buf_size - SGE_PG_RSVD, 1, 0);
 	if (ret)
 		goto err_unlock;
 
 	for (i = 0; i < SGE_RXQ_PER_SET; ++i) {
 		ret = t3_sge_init_flcntxt(adapter, q->fl[i].cntxt_id, 0,
 					  q->fl[i].phys_addr, q->fl[i].size,
-					  q->fl[i].buf_size, p->cong_thres, 1,
-					  0);
+					  q->fl[i].buf_size - SGE_PG_RSVD,
+					  p->cong_thres, 1, 0);
 		if (ret)
 			goto err_unlock;
 	}
@@ -3044,9 +3112,6 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 	t3_write_reg(adapter, A_SG_GTS, V_RSPQ(q->rspq.cntxt_id) |
 		     V_NEWTIMER(q->rspq.holdoff_tmr));
 
-	mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
-	mod_timer(&q->rx_reclaim_timer, jiffies + RX_RECLAIM_PERIOD);
-
 	return 0;
 
 err_unlock:
@@ -3057,6 +3122,27 @@ err:
 }
 
 /**
+ *      t3_start_sge_timers - start SGE timer call backs
+ *      @adap: the adapter
+ *
+ *      Starts each SGE queue set's timer call back
+ */
+void t3_start_sge_timers(struct adapter *adap)
+{
+	int i;
+
+	for (i = 0; i < SGE_QSETS; ++i) {
+		struct sge_qset *q = &adap->sge.qs[i];
+
+	if (q->tx_reclaim_timer.function)
+		mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
+
+	if (q->rx_reclaim_timer.function)
+		mod_timer(&q->rx_reclaim_timer, jiffies + RX_RECLAIM_PERIOD);
+	}
+}
+
+/**
  *	t3_stop_sge_timers - stop SGE timer call backs
  *	@adap: the adapter
  *
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index ff262a04ded0..31ed31a3428b 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -493,20 +493,20 @@ int t3_phy_lasi_intr_handler(struct cphy *phy)
 }
 
 static const struct adapter_info t3_adap_info[] = {
-	{2, 0,
+	{1, 1, 0,
 	 F_GPIO2_OEN | F_GPIO4_OEN |
 	 F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, { S_GPIO3, S_GPIO5 }, 0,
 	 &mi1_mdio_ops, "Chelsio PE9000"},
-	{2, 0,
+	{1, 1, 0,
 	 F_GPIO2_OEN | F_GPIO4_OEN |
 	 F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, { S_GPIO3, S_GPIO5 }, 0,
 	 &mi1_mdio_ops, "Chelsio T302"},
-	{1, 0,
+	{1, 0, 0,
 	 F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN |
 	 F_GPIO11_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
 	 { 0 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
 	 &mi1_mdio_ext_ops, "Chelsio T310"},
-	{2, 0,
+	{1, 1, 0,
 	 F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN |
 	 F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL |
 	 F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
@@ -514,7 +514,7 @@ static const struct adapter_info t3_adap_info[] = {
 	 &mi1_mdio_ext_ops, "Chelsio T320"},
 	{},
 	{},
-	{1, 0,
+	{1, 0, 0,
 	 F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO6_OEN | F_GPIO7_OEN |
 	 F_GPIO10_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
 	 { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
@@ -2128,16 +2128,40 @@ void t3_port_intr_clear(struct adapter *adapter, int idx)
 static int t3_sge_write_context(struct adapter *adapter, unsigned int id,
 				unsigned int type)
 {
-	t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff);
-	t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff);
-	t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0xffffffff);
-	t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff);
+	if (type == F_RESPONSEQ) {
+		/*
+		 * Can't write the Response Queue Context bits for
+		 * Interrupt Armed or the Reserve bits after the chip
+		 * has been initialized out of reset.  Writing to these
+		 * bits can confuse the hardware.
+		 */
+		t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff);
+		t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff);
+		t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0x17ffffff);
+		t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff);
+	} else {
+		t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff);
+		t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff);
+		t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0xffffffff);
+		t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff);
+	}
 	t3_write_reg(adapter, A_SG_CONTEXT_CMD,
 		     V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id));
 	return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
 			       0, SG_CONTEXT_CMD_ATTEMPTS, 1);
 }
 
+/**
+ *	clear_sge_ctxt - completely clear an SGE context
+ *	@adapter: the adapter
+ *	@id: the context id
+ *	@type: the context type
+ *
+ *	Completely clear an SGE context.  Used predominantly at post-reset
+ *	initialization.  Note in particular that we don't skip writing to any
+ *	"sensitive bits" in the contexts the way that t3_sge_write_context()
+ *	does ...
+ */
 static int clear_sge_ctxt(struct adapter *adap, unsigned int id,
 			  unsigned int type)
 {
@@ -2145,7 +2169,14 @@ static int clear_sge_ctxt(struct adapter *adap, unsigned int id,
 	t3_write_reg(adap, A_SG_CONTEXT_DATA1, 0);
 	t3_write_reg(adap, A_SG_CONTEXT_DATA2, 0);
 	t3_write_reg(adap, A_SG_CONTEXT_DATA3, 0);
-	return t3_sge_write_context(adap, id, type);
+	t3_write_reg(adap, A_SG_CONTEXT_MASK0, 0xffffffff);
+	t3_write_reg(adap, A_SG_CONTEXT_MASK1, 0xffffffff);
+	t3_write_reg(adap, A_SG_CONTEXT_MASK2, 0xffffffff);
+	t3_write_reg(adap, A_SG_CONTEXT_MASK3, 0xffffffff);
+	t3_write_reg(adap, A_SG_CONTEXT_CMD,
+		     V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id));
+	return t3_wait_op_done(adap, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+			       0, SG_CONTEXT_CMD_ATTEMPTS, 1);
 }
 
 /**
@@ -2729,10 +2760,10 @@ static void tp_config(struct adapter *adap, const struct tp_params *p)
 		     F_TCPCHECKSUMOFFLOAD | V_IPTTL(64));
 	t3_write_reg(adap, A_TP_TCP_OPTIONS, V_MTUDEFAULT(576) |
 		     F_MTUENABLE | V_WINDOWSCALEMODE(1) |
-		     V_TIMESTAMPSMODE(0) | V_SACKMODE(1) | V_SACKRX(1));
+		     V_TIMESTAMPSMODE(1) | V_SACKMODE(1) | V_SACKRX(1));
 	t3_write_reg(adap, A_TP_DACK_CONFIG, V_AUTOSTATE3(1) |
 		     V_AUTOSTATE2(1) | V_AUTOSTATE1(0) |
-		     V_BYTETHRESHOLD(16384) | V_MSSTHRESHOLD(2) |
+		     V_BYTETHRESHOLD(26880) | V_MSSTHRESHOLD(2) |
 		     F_AUTOCAREFUL | F_AUTOENABLE | V_DACK_MODE(1));
 	t3_set_reg_field(adap, A_TP_IN_CONFIG, F_RXFBARBPRIO | F_TXFBARBPRIO,
 			 F_IPV6ENABLE | F_NICMODE);
@@ -3196,20 +3227,22 @@ int t3_mps_set_active_ports(struct adapter *adap, unsigned int port_mask)
 }
 
 /*
- * Perform the bits of HW initialization that are dependent on the number
- * of available ports.
+ * Perform the bits of HW initialization that are dependent on the Tx
+ * channels being used.
  */
-static void init_hw_for_avail_ports(struct adapter *adap, int nports)
+static void chan_init_hw(struct adapter *adap, unsigned int chan_map)
 {
 	int i;
 
-	if (nports == 1) {
+	if (chan_map != 3) {                                 /* one channel */
 		t3_set_reg_field(adap, A_ULPRX_CTL, F_ROUND_ROBIN, 0);
 		t3_set_reg_field(adap, A_ULPTX_CONFIG, F_CFG_RR_ARB, 0);
-		t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_TPTXPORT0EN |
-			     F_PORT0ACTIVE | F_ENFORCEPKT);
-		t3_write_reg(adap, A_PM1_TX_CFG, 0xffffffff);
-	} else {
+		t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_ENFORCEPKT |
+			     (chan_map == 1 ? F_TPTXPORT0EN | F_PORT0ACTIVE :
+					      F_TPTXPORT1EN | F_PORT1ACTIVE));
+		t3_write_reg(adap, A_PM1_TX_CFG,
+			     chan_map == 1 ? 0xffffffff : 0);
+	} else {                                             /* two channels */
 		t3_set_reg_field(adap, A_ULPRX_CTL, 0, F_ROUND_ROBIN);
 		t3_set_reg_field(adap, A_ULPTX_CONFIG, 0, F_CFG_RR_ARB);
 		t3_write_reg(adap, A_ULPTX_DMA_WEIGHT,
@@ -3517,7 +3550,7 @@ int t3_init_hw(struct adapter *adapter, u32 fw_params)
 	t3_write_reg(adapter, A_PM1_RX_CFG, 0xffffffff);
 	t3_write_reg(adapter, A_PM1_RX_MODE, 0);
 	t3_write_reg(adapter, A_PM1_TX_MODE, 0);
-	init_hw_for_avail_ports(adapter, adapter->params.nports);
+	chan_init_hw(adapter, adapter->params.chan_map);
 	t3_sge_init(adapter, &adapter->params.sge);
 
 	t3_write_reg(adapter, A_T3DBG_GPIO_ACT_LOW, calc_gpio_intr(adapter));
@@ -3754,7 +3787,8 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
 	get_pci_mode(adapter, &adapter->params.pci);
 
 	adapter->params.info = ai;
-	adapter->params.nports = ai->nports;
+	adapter->params.nports = ai->nports0 + ai->nports1;
+	adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1);
 	adapter->params.rev = t3_read_reg(adapter, A_PL_REV);
 	/*
 	 * We used to only run the "adapter check task" once a second if
@@ -3785,7 +3819,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
 		mc7_prep(adapter, &adapter->pmtx, MC7_PMTX_BASE_ADDR, "PMTX");
 		mc7_prep(adapter, &adapter->cm, MC7_CM_BASE_ADDR, "CM");
 
-		p->nchan = ai->nports;
+		p->nchan = adapter->params.chan_map == 3 ? 2 : 1;
 		p->pmrx_size = t3_mc7_size(&adapter->pmrx);
 		p->pmtx_size = t3_mc7_size(&adapter->pmtx);
 		p->cm_size = t3_mc7_size(&adapter->cm);
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 55625dbbae5a..357f565851ed 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -566,6 +566,18 @@ MODULE_LICENSE("GPL");
     outw(CSR0, DEPCA_ADDR);\
     outw(STOP, DEPCA_DATA)
 
+static const struct net_device_ops depca_netdev_ops = {
+	.ndo_open 		= depca_open,
+	.ndo_start_xmit 	= depca_start_xmit,
+	.ndo_stop 		= depca_close,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_do_ioctl 		= depca_ioctl,
+	.ndo_tx_timeout 	= depca_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __init depca_hw_init (struct net_device *dev, struct device *device)
 {
 	struct depca_private *lp;
@@ -793,12 +805,7 @@ static int __init depca_hw_init (struct net_device *dev, struct device *device)
 	}
 
 	/* The DEPCA-specific entries in the device structure. */
-	dev->open = &depca_open;
-	dev->hard_start_xmit = &depca_start_xmit;
-	dev->stop = &depca_close;
-	dev->set_multicast_list = &set_multicast_list;
-	dev->do_ioctl = &depca_ioctl;
-	dev->tx_timeout = depca_tx_timeout;
+	dev->netdev_ops = &depca_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	dev->mem_start = 0;
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index e187c88ae145..cc2ab6412c73 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -739,6 +739,17 @@ static void __init eepro_print_info (struct net_device *dev)
 
 static const struct ethtool_ops eepro_ethtool_ops;
 
+static const struct net_device_ops eepro_netdev_ops = {
+ 	.ndo_open               = eepro_open,
+ 	.ndo_stop               = eepro_close,
+ 	.ndo_start_xmit    	= eepro_send_packet,
+ 	.ndo_set_multicast_list = set_multicast_list,
+ 	.ndo_tx_timeout		= eepro_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /* This is the real probe routine.  Linux has a history of friendly device
    probes on the ISA bus.  A good device probe avoids doing writes, and
    verifies that the correct device exists and functions.  */
@@ -851,11 +862,7 @@ static int __init eepro_probe1(struct net_device *dev, int autoprobe)
  		}
  	}
 
- 	dev->open               = eepro_open;
- 	dev->stop               = eepro_close;
- 	dev->hard_start_xmit    = eepro_send_packet;
- 	dev->set_multicast_list = &set_multicast_list;
- 	dev->tx_timeout		= eepro_tx_timeout;
+	dev->netdev_ops		= &eepro_netdev_ops;
  	dev->watchdog_timeo	= TX_TIMEOUT;
 	dev->ethtool_ops	= &eepro_ethtool_ops;
 
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 9ff3f2f5e382..1686dca28748 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -1043,6 +1043,17 @@ static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
 	lp->last_tx = jiffies;
 }
 
+static const struct net_device_ops eexp_netdev_ops = {
+	.ndo_open 		= eexp_open,
+	.ndo_stop 		= eexp_close,
+	.ndo_start_xmit		= eexp_xmit,
+	.ndo_set_multicast_list = eexp_set_multicast,
+	.ndo_tx_timeout		= eexp_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /*
  * Sanity check the suspected EtherExpress card
  * Read hardware address, reset card, size memory and initialize buffer
@@ -1163,11 +1174,7 @@ static int __init eexp_hw_probe(struct net_device *dev, unsigned short ioaddr)
 	lp->rx_buf_start = TX_BUF_START + (lp->num_tx_bufs*TX_BUF_SIZE);
 	lp->width = buswidth;
 
-	dev->open = eexp_open;
-	dev->stop = eexp_close;
-	dev->hard_start_xmit = eexp_xmit;
-	dev->set_multicast_list = &eexp_set_multicast;
-	dev->tx_timeout = eexp_timeout;
+	dev->netdev_ops = &eexp_netdev_ops;
 	dev->watchdog_timeo = 2*HZ;
 
 	return register_netdev(dev);
diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c
index 5c048f2fd74f..0d8b6da046f2 100644
--- a/drivers/net/eth16i.c
+++ b/drivers/net/eth16i.c
@@ -475,6 +475,17 @@ out:
 }
 #endif
 
+static const struct net_device_ops eth16i_netdev_ops = {
+	.ndo_open               = eth16i_open,
+	.ndo_stop               = eth16i_close,
+	.ndo_start_xmit    	= eth16i_tx,
+	.ndo_set_multicast_list = eth16i_multicast,
+	.ndo_tx_timeout 	= eth16i_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __init eth16i_probe1(struct net_device *dev, int ioaddr)
 {
 	struct eth16i_local *lp = netdev_priv(dev);
@@ -549,12 +560,7 @@ static int __init eth16i_probe1(struct net_device *dev, int ioaddr)
 	BITCLR(ioaddr + CONFIG_REG_1, POWERUP);
 
 	/* Initialize the device structure */
-	memset(lp, 0, sizeof(struct eth16i_local));
-	dev->open               = eth16i_open;
-	dev->stop               = eth16i_close;
-	dev->hard_start_xmit    = eth16i_tx;
-	dev->set_multicast_list = eth16i_multicast;
-	dev->tx_timeout 	= eth16i_timeout;
+	dev->netdev_ops         = &eth16i_netdev_ops;
 	dev->watchdog_timeo	= TX_TIMEOUT;
 	spin_lock_init(&lp->lock);
 
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
new file mode 100644
index 000000000000..91a9b1a33764
--- /dev/null
+++ b/drivers/net/ethoc.c
@@ -0,0 +1,1112 @@
+/*
+ * linux/drivers/net/ethoc.c
+ *
+ * Copyright (C) 2007-2008 Avionic Design Development GmbH
+ * Copyright (C) 2008-2009 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Written by Thierry Reding <thierry.reding@avionic-design.de>
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/crc32.h>
+#include <linux/io.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <net/ethoc.h>
+
+/* register offsets */
+#define	MODER		0x00
+#define	INT_SOURCE	0x04
+#define	INT_MASK	0x08
+#define	IPGT		0x0c
+#define	IPGR1		0x10
+#define	IPGR2		0x14
+#define	PACKETLEN	0x18
+#define	COLLCONF	0x1c
+#define	TX_BD_NUM	0x20
+#define	CTRLMODER	0x24
+#define	MIIMODER	0x28
+#define	MIICOMMAND	0x2c
+#define	MIIADDRESS	0x30
+#define	MIITX_DATA	0x34
+#define	MIIRX_DATA	0x38
+#define	MIISTATUS	0x3c
+#define	MAC_ADDR0	0x40
+#define	MAC_ADDR1	0x44
+#define	ETH_HASH0	0x48
+#define	ETH_HASH1	0x4c
+#define	ETH_TXCTRL	0x50
+
+/* mode register */
+#define	MODER_RXEN	(1 <<  0) /* receive enable */
+#define	MODER_TXEN	(1 <<  1) /* transmit enable */
+#define	MODER_NOPRE	(1 <<  2) /* no preamble */
+#define	MODER_BRO	(1 <<  3) /* broadcast address */
+#define	MODER_IAM	(1 <<  4) /* individual address mode */
+#define	MODER_PRO	(1 <<  5) /* promiscuous mode */
+#define	MODER_IFG	(1 <<  6) /* interframe gap for incoming frames */
+#define	MODER_LOOP	(1 <<  7) /* loopback */
+#define	MODER_NBO	(1 <<  8) /* no back-off */
+#define	MODER_EDE	(1 <<  9) /* excess defer enable */
+#define	MODER_FULLD	(1 << 10) /* full duplex */
+#define	MODER_RESET	(1 << 11) /* FIXME: reset (undocumented) */
+#define	MODER_DCRC	(1 << 12) /* delayed CRC enable */
+#define	MODER_CRC	(1 << 13) /* CRC enable */
+#define	MODER_HUGE	(1 << 14) /* huge packets enable */
+#define	MODER_PAD	(1 << 15) /* padding enabled */
+#define	MODER_RSM	(1 << 16) /* receive small packets */
+
+/* interrupt source and mask registers */
+#define	INT_MASK_TXF	(1 << 0) /* transmit frame */
+#define	INT_MASK_TXE	(1 << 1) /* transmit error */
+#define	INT_MASK_RXF	(1 << 2) /* receive frame */
+#define	INT_MASK_RXE	(1 << 3) /* receive error */
+#define	INT_MASK_BUSY	(1 << 4)
+#define	INT_MASK_TXC	(1 << 5) /* transmit control frame */
+#define	INT_MASK_RXC	(1 << 6) /* receive control frame */
+
+#define	INT_MASK_TX	(INT_MASK_TXF | INT_MASK_TXE)
+#define	INT_MASK_RX	(INT_MASK_RXF | INT_MASK_RXE)
+
+#define	INT_MASK_ALL ( \
+		INT_MASK_TXF | INT_MASK_TXE | \
+		INT_MASK_RXF | INT_MASK_RXE | \
+		INT_MASK_TXC | INT_MASK_RXC | \
+		INT_MASK_BUSY \
+	)
+
+/* packet length register */
+#define	PACKETLEN_MIN(min)		(((min) & 0xffff) << 16)
+#define	PACKETLEN_MAX(max)		(((max) & 0xffff) <<  0)
+#define	PACKETLEN_MIN_MAX(min, max)	(PACKETLEN_MIN(min) | \
+					PACKETLEN_MAX(max))
+
+/* transmit buffer number register */
+#define	TX_BD_NUM_VAL(x)	(((x) <= 0x80) ? (x) : 0x80)
+
+/* control module mode register */
+#define	CTRLMODER_PASSALL	(1 << 0) /* pass all receive frames */
+#define	CTRLMODER_RXFLOW	(1 << 1) /* receive control flow */
+#define	CTRLMODER_TXFLOW	(1 << 2) /* transmit control flow */
+
+/* MII mode register */
+#define	MIIMODER_CLKDIV(x)	((x) & 0xfe) /* needs to be an even number */
+#define	MIIMODER_NOPRE		(1 << 8) /* no preamble */
+
+/* MII command register */
+#define	MIICOMMAND_SCAN		(1 << 0) /* scan status */
+#define	MIICOMMAND_READ		(1 << 1) /* read status */
+#define	MIICOMMAND_WRITE	(1 << 2) /* write control data */
+
+/* MII address register */
+#define	MIIADDRESS_FIAD(x)		(((x) & 0x1f) << 0)
+#define	MIIADDRESS_RGAD(x)		(((x) & 0x1f) << 8)
+#define	MIIADDRESS_ADDR(phy, reg)	(MIIADDRESS_FIAD(phy) | \
+					MIIADDRESS_RGAD(reg))
+
+/* MII transmit data register */
+#define	MIITX_DATA_VAL(x)	((x) & 0xffff)
+
+/* MII receive data register */
+#define	MIIRX_DATA_VAL(x)	((x) & 0xffff)
+
+/* MII status register */
+#define	MIISTATUS_LINKFAIL	(1 << 0)
+#define	MIISTATUS_BUSY		(1 << 1)
+#define	MIISTATUS_INVALID	(1 << 2)
+
+/* TX buffer descriptor */
+#define	TX_BD_CS		(1 <<  0) /* carrier sense lost */
+#define	TX_BD_DF		(1 <<  1) /* defer indication */
+#define	TX_BD_LC		(1 <<  2) /* late collision */
+#define	TX_BD_RL		(1 <<  3) /* retransmission limit */
+#define	TX_BD_RETRY_MASK	(0x00f0)
+#define	TX_BD_RETRY(x)		(((x) & 0x00f0) >>  4)
+#define	TX_BD_UR		(1 <<  8) /* transmitter underrun */
+#define	TX_BD_CRC		(1 << 11) /* TX CRC enable */
+#define	TX_BD_PAD		(1 << 12) /* pad enable for short packets */
+#define	TX_BD_WRAP		(1 << 13)
+#define	TX_BD_IRQ		(1 << 14) /* interrupt request enable */
+#define	TX_BD_READY		(1 << 15) /* TX buffer ready */
+#define	TX_BD_LEN(x)		(((x) & 0xffff) << 16)
+#define	TX_BD_LEN_MASK		(0xffff << 16)
+
+#define	TX_BD_STATS		(TX_BD_CS | TX_BD_DF | TX_BD_LC | \
+				TX_BD_RL | TX_BD_RETRY_MASK | TX_BD_UR)
+
+/* RX buffer descriptor */
+#define	RX_BD_LC	(1 <<  0) /* late collision */
+#define	RX_BD_CRC	(1 <<  1) /* RX CRC error */
+#define	RX_BD_SF	(1 <<  2) /* short frame */
+#define	RX_BD_TL	(1 <<  3) /* too long */
+#define	RX_BD_DN	(1 <<  4) /* dribble nibble */
+#define	RX_BD_IS	(1 <<  5) /* invalid symbol */
+#define	RX_BD_OR	(1 <<  6) /* receiver overrun */
+#define	RX_BD_MISS	(1 <<  7)
+#define	RX_BD_CF	(1 <<  8) /* control frame */
+#define	RX_BD_WRAP	(1 << 13)
+#define	RX_BD_IRQ	(1 << 14) /* interrupt request enable */
+#define	RX_BD_EMPTY	(1 << 15)
+#define	RX_BD_LEN(x)	(((x) & 0xffff) << 16)
+
+#define	RX_BD_STATS	(RX_BD_LC | RX_BD_CRC | RX_BD_SF | RX_BD_TL | \
+			RX_BD_DN | RX_BD_IS | RX_BD_OR | RX_BD_MISS)
+
+#define	ETHOC_BUFSIZ		1536
+#define	ETHOC_ZLEN		64
+#define	ETHOC_BD_BASE		0x400
+#define	ETHOC_TIMEOUT		(HZ / 2)
+#define	ETHOC_MII_TIMEOUT	(1 + (HZ / 5))
+
+/**
+ * struct ethoc - driver-private device structure
+ * @iobase:	pointer to I/O memory region
+ * @membase:	pointer to buffer memory region
+ * @num_tx:	number of send buffers
+ * @cur_tx:	last send buffer written
+ * @dty_tx:	last buffer actually sent
+ * @num_rx:	number of receive buffers
+ * @cur_rx:	current receive buffer
+ * @netdev:	pointer to network device structure
+ * @napi:	NAPI structure
+ * @stats:	network device statistics
+ * @msg_enable:	device state flags
+ * @rx_lock:	receive lock
+ * @lock:	device lock
+ * @phy:	attached PHY
+ * @mdio:	MDIO bus for PHY access
+ * @phy_id:	address of attached PHY
+ */
+struct ethoc {
+	void __iomem *iobase;
+	void __iomem *membase;
+
+	unsigned int num_tx;
+	unsigned int cur_tx;
+	unsigned int dty_tx;
+
+	unsigned int num_rx;
+	unsigned int cur_rx;
+
+	struct net_device *netdev;
+	struct napi_struct napi;
+	struct net_device_stats stats;
+	u32 msg_enable;
+
+	spinlock_t rx_lock;
+	spinlock_t lock;
+
+	struct phy_device *phy;
+	struct mii_bus *mdio;
+	s8 phy_id;
+};
+
+/**
+ * struct ethoc_bd - buffer descriptor
+ * @stat:	buffer statistics
+ * @addr:	physical memory address
+ */
+struct ethoc_bd {
+	u32 stat;
+	u32 addr;
+};
+
+static u32 ethoc_read(struct ethoc *dev, loff_t offset)
+{
+	return ioread32(dev->iobase + offset);
+}
+
+static void ethoc_write(struct ethoc *dev, loff_t offset, u32 data)
+{
+	iowrite32(data, dev->iobase + offset);
+}
+
+static void ethoc_read_bd(struct ethoc *dev, int index, struct ethoc_bd *bd)
+{
+	loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd));
+	bd->stat = ethoc_read(dev, offset + 0);
+	bd->addr = ethoc_read(dev, offset + 4);
+}
+
+static void ethoc_write_bd(struct ethoc *dev, int index,
+		const struct ethoc_bd *bd)
+{
+	loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd));
+	ethoc_write(dev, offset + 0, bd->stat);
+	ethoc_write(dev, offset + 4, bd->addr);
+}
+
+static void ethoc_enable_irq(struct ethoc *dev, u32 mask)
+{
+	u32 imask = ethoc_read(dev, INT_MASK);
+	imask |= mask;
+	ethoc_write(dev, INT_MASK, imask);
+}
+
+static void ethoc_disable_irq(struct ethoc *dev, u32 mask)
+{
+	u32 imask = ethoc_read(dev, INT_MASK);
+	imask &= ~mask;
+	ethoc_write(dev, INT_MASK, imask);
+}
+
+static void ethoc_ack_irq(struct ethoc *dev, u32 mask)
+{
+	ethoc_write(dev, INT_SOURCE, mask);
+}
+
+static void ethoc_enable_rx_and_tx(struct ethoc *dev)
+{
+	u32 mode = ethoc_read(dev, MODER);
+	mode |= MODER_RXEN | MODER_TXEN;
+	ethoc_write(dev, MODER, mode);
+}
+
+static void ethoc_disable_rx_and_tx(struct ethoc *dev)
+{
+	u32 mode = ethoc_read(dev, MODER);
+	mode &= ~(MODER_RXEN | MODER_TXEN);
+	ethoc_write(dev, MODER, mode);
+}
+
+static int ethoc_init_ring(struct ethoc *dev)
+{
+	struct ethoc_bd bd;
+	int i;
+
+	dev->cur_tx = 0;
+	dev->dty_tx = 0;
+	dev->cur_rx = 0;
+
+	/* setup transmission buffers */
+	bd.addr = 0;
+	bd.stat = TX_BD_IRQ | TX_BD_CRC;
+
+	for (i = 0; i < dev->num_tx; i++) {
+		if (i == dev->num_tx - 1)
+			bd.stat |= TX_BD_WRAP;
+
+		ethoc_write_bd(dev, i, &bd);
+		bd.addr += ETHOC_BUFSIZ;
+	}
+
+	bd.addr = dev->num_tx * ETHOC_BUFSIZ;
+	bd.stat = RX_BD_EMPTY | RX_BD_IRQ;
+
+	for (i = 0; i < dev->num_rx; i++) {
+		if (i == dev->num_rx - 1)
+			bd.stat |= RX_BD_WRAP;
+
+		ethoc_write_bd(dev, dev->num_tx + i, &bd);
+		bd.addr += ETHOC_BUFSIZ;
+	}
+
+	return 0;
+}
+
+static int ethoc_reset(struct ethoc *dev)
+{
+	u32 mode;
+
+	/* TODO: reset controller? */
+
+	ethoc_disable_rx_and_tx(dev);
+
+	/* TODO: setup registers */
+
+	/* enable FCS generation and automatic padding */
+	mode = ethoc_read(dev, MODER);
+	mode |= MODER_CRC | MODER_PAD;
+	ethoc_write(dev, MODER, mode);
+
+	/* set full-duplex mode */
+	mode = ethoc_read(dev, MODER);
+	mode |= MODER_FULLD;
+	ethoc_write(dev, MODER, mode);
+	ethoc_write(dev, IPGT, 0x15);
+
+	ethoc_ack_irq(dev, INT_MASK_ALL);
+	ethoc_enable_irq(dev, INT_MASK_ALL);
+	ethoc_enable_rx_and_tx(dev);
+	return 0;
+}
+
+static unsigned int ethoc_update_rx_stats(struct ethoc *dev,
+		struct ethoc_bd *bd)
+{
+	struct net_device *netdev = dev->netdev;
+	unsigned int ret = 0;
+
+	if (bd->stat & RX_BD_TL) {
+		dev_err(&netdev->dev, "RX: frame too long\n");
+		dev->stats.rx_length_errors++;
+		ret++;
+	}
+
+	if (bd->stat & RX_BD_SF) {
+		dev_err(&netdev->dev, "RX: frame too short\n");
+		dev->stats.rx_length_errors++;
+		ret++;
+	}
+
+	if (bd->stat & RX_BD_DN) {
+		dev_err(&netdev->dev, "RX: dribble nibble\n");
+		dev->stats.rx_frame_errors++;
+	}
+
+	if (bd->stat & RX_BD_CRC) {
+		dev_err(&netdev->dev, "RX: wrong CRC\n");
+		dev->stats.rx_crc_errors++;
+		ret++;
+	}
+
+	if (bd->stat & RX_BD_OR) {
+		dev_err(&netdev->dev, "RX: overrun\n");
+		dev->stats.rx_over_errors++;
+		ret++;
+	}
+
+	if (bd->stat & RX_BD_MISS)
+		dev->stats.rx_missed_errors++;
+
+	if (bd->stat & RX_BD_LC) {
+		dev_err(&netdev->dev, "RX: late collision\n");
+		dev->stats.collisions++;
+		ret++;
+	}
+
+	return ret;
+}
+
+static int ethoc_rx(struct net_device *dev, int limit)
+{
+	struct ethoc *priv = netdev_priv(dev);
+	int count;
+
+	for (count = 0; count < limit; ++count) {
+		unsigned int entry;
+		struct ethoc_bd bd;
+
+		entry = priv->num_tx + (priv->cur_rx % priv->num_rx);
+		ethoc_read_bd(priv, entry, &bd);
+		if (bd.stat & RX_BD_EMPTY)
+			break;
+
+		if (ethoc_update_rx_stats(priv, &bd) == 0) {
+			int size = bd.stat >> 16;
+			struct sk_buff *skb = netdev_alloc_skb(dev, size);
+			if (likely(skb)) {
+				void *src = priv->membase + bd.addr;
+				memcpy_fromio(skb_put(skb, size), src, size);
+				skb->protocol = eth_type_trans(skb, dev);
+				dev->last_rx = jiffies;
+				priv->stats.rx_packets++;
+				priv->stats.rx_bytes += size;
+				netif_receive_skb(skb);
+			} else {
+				if (net_ratelimit())
+					dev_warn(&dev->dev, "low on memory - "
+							"packet dropped\n");
+
+				priv->stats.rx_dropped++;
+				break;
+			}
+		}
+
+		/* clear the buffer descriptor so it can be reused */
+		bd.stat &= ~RX_BD_STATS;
+		bd.stat |=  RX_BD_EMPTY;
+		ethoc_write_bd(priv, entry, &bd);
+		priv->cur_rx++;
+	}
+
+	return count;
+}
+
+static int ethoc_update_tx_stats(struct ethoc *dev, struct ethoc_bd *bd)
+{
+	struct net_device *netdev = dev->netdev;
+
+	if (bd->stat & TX_BD_LC) {
+		dev_err(&netdev->dev, "TX: late collision\n");
+		dev->stats.tx_window_errors++;
+	}
+
+	if (bd->stat & TX_BD_RL) {
+		dev_err(&netdev->dev, "TX: retransmit limit\n");
+		dev->stats.tx_aborted_errors++;
+	}
+
+	if (bd->stat & TX_BD_UR) {
+		dev_err(&netdev->dev, "TX: underrun\n");
+		dev->stats.tx_fifo_errors++;
+	}
+
+	if (bd->stat & TX_BD_CS) {
+		dev_err(&netdev->dev, "TX: carrier sense lost\n");
+		dev->stats.tx_carrier_errors++;
+	}
+
+	if (bd->stat & TX_BD_STATS)
+		dev->stats.tx_errors++;
+
+	dev->stats.collisions += (bd->stat >> 4) & 0xf;
+	dev->stats.tx_bytes += bd->stat >> 16;
+	dev->stats.tx_packets++;
+	return 0;
+}
+
+static void ethoc_tx(struct net_device *dev)
+{
+	struct ethoc *priv = netdev_priv(dev);
+
+	spin_lock(&priv->lock);
+
+	while (priv->dty_tx != priv->cur_tx) {
+		unsigned int entry = priv->dty_tx % priv->num_tx;
+		struct ethoc_bd bd;
+
+		ethoc_read_bd(priv, entry, &bd);
+		if (bd.stat & TX_BD_READY)
+			break;
+
+		entry = (++priv->dty_tx) % priv->num_tx;
+		(void)ethoc_update_tx_stats(priv, &bd);
+	}
+
+	if ((priv->cur_tx - priv->dty_tx) <= (priv->num_tx / 2))
+		netif_wake_queue(dev);
+
+	ethoc_ack_irq(priv, INT_MASK_TX);
+	spin_unlock(&priv->lock);
+}
+
+static irqreturn_t ethoc_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct ethoc *priv = netdev_priv(dev);
+	u32 pending;
+
+	ethoc_disable_irq(priv, INT_MASK_ALL);
+	pending = ethoc_read(priv, INT_SOURCE);
+	if (unlikely(pending == 0)) {
+		ethoc_enable_irq(priv, INT_MASK_ALL);
+		return IRQ_NONE;
+	}
+
+	ethoc_ack_irq(priv, INT_MASK_ALL);
+
+	if (pending & INT_MASK_BUSY) {
+		dev_err(&dev->dev, "packet dropped\n");
+		priv->stats.rx_dropped++;
+	}
+
+	if (pending & INT_MASK_RX) {
+		if (napi_schedule_prep(&priv->napi))
+			__napi_schedule(&priv->napi);
+	} else {
+		ethoc_enable_irq(priv, INT_MASK_RX);
+	}
+
+	if (pending & INT_MASK_TX)
+		ethoc_tx(dev);
+
+	ethoc_enable_irq(priv, INT_MASK_ALL & ~INT_MASK_RX);
+	return IRQ_HANDLED;
+}
+
+static int ethoc_get_mac_address(struct net_device *dev, void *addr)
+{
+	struct ethoc *priv = netdev_priv(dev);
+	u8 *mac = (u8 *)addr;
+	u32 reg;
+
+	reg = ethoc_read(priv, MAC_ADDR0);
+	mac[2] = (reg >> 24) & 0xff;
+	mac[3] = (reg >> 16) & 0xff;
+	mac[4] = (reg >>  8) & 0xff;
+	mac[5] = (reg >>  0) & 0xff;
+
+	reg = ethoc_read(priv, MAC_ADDR1);
+	mac[0] = (reg >>  8) & 0xff;
+	mac[1] = (reg >>  0) & 0xff;
+
+	return 0;
+}
+
+static int ethoc_poll(struct napi_struct *napi, int budget)
+{
+	struct ethoc *priv = container_of(napi, struct ethoc, napi);
+	int work_done = 0;
+
+	work_done = ethoc_rx(priv->netdev, budget);
+	if (work_done < budget) {
+		ethoc_enable_irq(priv, INT_MASK_RX);
+		napi_complete(napi);
+	}
+
+	return work_done;
+}
+
+static int ethoc_mdio_read(struct mii_bus *bus, int phy, int reg)
+{
+	unsigned long timeout = jiffies + ETHOC_MII_TIMEOUT;
+	struct ethoc *priv = bus->priv;
+
+	ethoc_write(priv, MIIADDRESS, MIIADDRESS_ADDR(phy, reg));
+	ethoc_write(priv, MIICOMMAND, MIICOMMAND_READ);
+
+	while (time_before(jiffies, timeout)) {
+		u32 status = ethoc_read(priv, MIISTATUS);
+		if (!(status & MIISTATUS_BUSY)) {
+			u32 data = ethoc_read(priv, MIIRX_DATA);
+			/* reset MII command register */
+			ethoc_write(priv, MIICOMMAND, 0);
+			return data;
+		}
+
+		schedule();
+	}
+
+	return -EBUSY;
+}
+
+static int ethoc_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val)
+{
+	unsigned long timeout = jiffies + ETHOC_MII_TIMEOUT;
+	struct ethoc *priv = bus->priv;
+
+	ethoc_write(priv, MIIADDRESS, MIIADDRESS_ADDR(phy, reg));
+	ethoc_write(priv, MIITX_DATA, val);
+	ethoc_write(priv, MIICOMMAND, MIICOMMAND_WRITE);
+
+	while (time_before(jiffies, timeout)) {
+		u32 stat = ethoc_read(priv, MIISTATUS);
+		if (!(stat & MIISTATUS_BUSY))
+			return 0;
+
+		schedule();
+	}
+
+	return -EBUSY;
+}
+
+static int ethoc_mdio_reset(struct mii_bus *bus)
+{
+	return 0;
+}
+
+static void ethoc_mdio_poll(struct net_device *dev)
+{
+}
+
+static int ethoc_mdio_probe(struct net_device *dev)
+{
+	struct ethoc *priv = netdev_priv(dev);
+	struct phy_device *phy;
+	int i;
+
+	for (i = 0; i < PHY_MAX_ADDR; i++) {
+		phy = priv->mdio->phy_map[i];
+		if (phy) {
+			if (priv->phy_id != -1) {
+				/* attach to specified PHY */
+				if (priv->phy_id == phy->addr)
+					break;
+			} else {
+				/* autoselect PHY if none was specified */
+				if (phy->addr != 0)
+					break;
+			}
+		}
+	}
+
+	if (!phy) {
+		dev_err(&dev->dev, "no PHY found\n");
+		return -ENXIO;
+	}
+
+	phy = phy_connect(dev, dev_name(&phy->dev), &ethoc_mdio_poll, 0,
+			PHY_INTERFACE_MODE_GMII);
+	if (IS_ERR(phy)) {
+		dev_err(&dev->dev, "could not attach to PHY\n");
+		return PTR_ERR(phy);
+	}
+
+	priv->phy = phy;
+	return 0;
+}
+
+static int ethoc_open(struct net_device *dev)
+{
+	struct ethoc *priv = netdev_priv(dev);
+	unsigned int min_tx = 2;
+	unsigned int num_bd;
+	int ret;
+
+	ret = request_irq(dev->irq, ethoc_interrupt, IRQF_SHARED,
+			dev->name, dev);
+	if (ret)
+		return ret;
+
+	/* calculate the number of TX/RX buffers */
+	num_bd = (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ;
+	priv->num_tx = min(min_tx, num_bd / 4);
+	priv->num_rx = num_bd - priv->num_tx;
+	ethoc_write(priv, TX_BD_NUM, priv->num_tx);
+
+	ethoc_init_ring(priv);
+	ethoc_reset(priv);
+
+	if (netif_queue_stopped(dev)) {
+		dev_dbg(&dev->dev, " resuming queue\n");
+		netif_wake_queue(dev);
+	} else {
+		dev_dbg(&dev->dev, " starting queue\n");
+		netif_start_queue(dev);
+	}
+
+	phy_start(priv->phy);
+	napi_enable(&priv->napi);
+
+	if (netif_msg_ifup(priv)) {
+		dev_info(&dev->dev, "I/O: %08lx Memory: %08lx-%08lx\n",
+				dev->base_addr, dev->mem_start, dev->mem_end);
+	}
+
+	return 0;
+}
+
+static int ethoc_stop(struct net_device *dev)
+{
+	struct ethoc *priv = netdev_priv(dev);
+
+	napi_disable(&priv->napi);
+
+	if (priv->phy)
+		phy_stop(priv->phy);
+
+	ethoc_disable_rx_and_tx(priv);
+	free_irq(dev->irq, dev);
+
+	if (!netif_queue_stopped(dev))
+		netif_stop_queue(dev);
+
+	return 0;
+}
+
+static int ethoc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct ethoc *priv = netdev_priv(dev);
+	struct mii_ioctl_data *mdio = if_mii(ifr);
+	struct phy_device *phy = NULL;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	if (cmd != SIOCGMIIPHY) {
+		if (mdio->phy_id >= PHY_MAX_ADDR)
+			return -ERANGE;
+
+		phy = priv->mdio->phy_map[mdio->phy_id];
+		if (!phy)
+			return -ENODEV;
+	} else {
+		phy = priv->phy;
+	}
+
+	return phy_mii_ioctl(phy, mdio, cmd);
+}
+
+static int ethoc_config(struct net_device *dev, struct ifmap *map)
+{
+	return -ENOSYS;
+}
+
+static int ethoc_set_mac_address(struct net_device *dev, void *addr)
+{
+	struct ethoc *priv = netdev_priv(dev);
+	u8 *mac = (u8 *)addr;
+
+	ethoc_write(priv, MAC_ADDR0, (mac[2] << 24) | (mac[3] << 16) |
+				     (mac[4] <<  8) | (mac[5] <<  0));
+	ethoc_write(priv, MAC_ADDR1, (mac[0] <<  8) | (mac[1] <<  0));
+
+	return 0;
+}
+
+static void ethoc_set_multicast_list(struct net_device *dev)
+{
+	struct ethoc *priv = netdev_priv(dev);
+	u32 mode = ethoc_read(priv, MODER);
+	struct dev_mc_list *mc = NULL;
+	u32 hash[2] = { 0, 0 };
+
+	/* set loopback mode if requested */
+	if (dev->flags & IFF_LOOPBACK)
+		mode |=  MODER_LOOP;
+	else
+		mode &= ~MODER_LOOP;
+
+	/* receive broadcast frames if requested */
+	if (dev->flags & IFF_BROADCAST)
+		mode &= ~MODER_BRO;
+	else
+		mode |=  MODER_BRO;
+
+	/* enable promiscuous mode if requested */
+	if (dev->flags & IFF_PROMISC)
+		mode |=  MODER_PRO;
+	else
+		mode &= ~MODER_PRO;
+
+	ethoc_write(priv, MODER, mode);
+
+	/* receive multicast frames */
+	if (dev->flags & IFF_ALLMULTI) {
+		hash[0] = 0xffffffff;
+		hash[1] = 0xffffffff;
+	} else {
+		for (mc = dev->mc_list; mc; mc = mc->next) {
+			u32 crc = ether_crc(mc->dmi_addrlen, mc->dmi_addr);
+			int bit = (crc >> 26) & 0x3f;
+			hash[bit >> 5] |= 1 << (bit & 0x1f);
+		}
+	}
+
+	ethoc_write(priv, ETH_HASH0, hash[0]);
+	ethoc_write(priv, ETH_HASH1, hash[1]);
+}
+
+static int ethoc_change_mtu(struct net_device *dev, int new_mtu)
+{
+	return -ENOSYS;
+}
+
+static void ethoc_tx_timeout(struct net_device *dev)
+{
+	struct ethoc *priv = netdev_priv(dev);
+	u32 pending = ethoc_read(priv, INT_SOURCE);
+	if (likely(pending))
+		ethoc_interrupt(dev->irq, dev);
+}
+
+static struct net_device_stats *ethoc_stats(struct net_device *dev)
+{
+	struct ethoc *priv = netdev_priv(dev);
+	return &priv->stats;
+}
+
+static int ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct ethoc *priv = netdev_priv(dev);
+	struct ethoc_bd bd;
+	unsigned int entry;
+	void *dest;
+
+	if (unlikely(skb->len > ETHOC_BUFSIZ)) {
+		priv->stats.tx_errors++;
+		return -EMSGSIZE;
+	}
+
+	entry = priv->cur_tx % priv->num_tx;
+	spin_lock_irq(&priv->lock);
+	priv->cur_tx++;
+
+	ethoc_read_bd(priv, entry, &bd);
+	if (unlikely(skb->len < ETHOC_ZLEN))
+		bd.stat |=  TX_BD_PAD;
+	else
+		bd.stat &= ~TX_BD_PAD;
+
+	dest = priv->membase + bd.addr;
+	memcpy_toio(dest, skb->data, skb->len);
+
+	bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK);
+	bd.stat |= TX_BD_LEN(skb->len);
+	ethoc_write_bd(priv, entry, &bd);
+
+	bd.stat |= TX_BD_READY;
+	ethoc_write_bd(priv, entry, &bd);
+
+	if (priv->cur_tx == (priv->dty_tx + priv->num_tx)) {
+		dev_dbg(&dev->dev, "stopping queue\n");
+		netif_stop_queue(dev);
+	}
+
+	dev->trans_start = jiffies;
+	dev_kfree_skb(skb);
+
+	spin_unlock_irq(&priv->lock);
+	return NETDEV_TX_OK;
+}
+
+static const struct net_device_ops ethoc_netdev_ops = {
+	.ndo_open = ethoc_open,
+	.ndo_stop = ethoc_stop,
+	.ndo_do_ioctl = ethoc_ioctl,
+	.ndo_set_config = ethoc_config,
+	.ndo_set_mac_address = ethoc_set_mac_address,
+	.ndo_set_multicast_list = ethoc_set_multicast_list,
+	.ndo_change_mtu = ethoc_change_mtu,
+	.ndo_tx_timeout = ethoc_tx_timeout,
+	.ndo_get_stats = ethoc_stats,
+	.ndo_start_xmit = ethoc_start_xmit,
+};
+
+/**
+ * ethoc_probe() - initialize OpenCores ethernet MAC
+ * pdev:	platform device
+ */
+static int ethoc_probe(struct platform_device *pdev)
+{
+	struct net_device *netdev = NULL;
+	struct resource *res = NULL;
+	struct resource *mmio = NULL;
+	struct resource *mem = NULL;
+	struct ethoc *priv = NULL;
+	unsigned int phy;
+	int ret = 0;
+
+	/* allocate networking device */
+	netdev = alloc_etherdev(sizeof(struct ethoc));
+	if (!netdev) {
+		dev_err(&pdev->dev, "cannot allocate network device\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+	platform_set_drvdata(pdev, netdev);
+
+	/* obtain I/O memory space */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot obtain I/O memory space\n");
+		ret = -ENXIO;
+		goto free;
+	}
+
+	mmio = devm_request_mem_region(&pdev->dev, res->start,
+			res->end - res->start + 1, res->name);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot request I/O memory space\n");
+		ret = -ENXIO;
+		goto free;
+	}
+
+	netdev->base_addr = mmio->start;
+
+	/* obtain buffer memory space */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot obtain memory space\n");
+		ret = -ENXIO;
+		goto free;
+	}
+
+	mem = devm_request_mem_region(&pdev->dev, res->start,
+			res->end - res->start + 1, res->name);
+	if (!mem) {
+		dev_err(&pdev->dev, "cannot request memory space\n");
+		ret = -ENXIO;
+		goto free;
+	}
+
+	netdev->mem_start = mem->start;
+	netdev->mem_end   = mem->end;
+
+	/* obtain device IRQ number */
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot obtain IRQ\n");
+		ret = -ENXIO;
+		goto free;
+	}
+
+	netdev->irq = res->start;
+
+	/* setup driver-private data */
+	priv = netdev_priv(netdev);
+	priv->netdev = netdev;
+
+	priv->iobase = devm_ioremap_nocache(&pdev->dev, netdev->base_addr,
+			mmio->end - mmio->start + 1);
+	if (!priv->iobase) {
+		dev_err(&pdev->dev, "cannot remap I/O memory space\n");
+		ret = -ENXIO;
+		goto error;
+	}
+
+	priv->membase = devm_ioremap_nocache(&pdev->dev, netdev->mem_start,
+			mem->end - mem->start + 1);
+	if (!priv->membase) {
+		dev_err(&pdev->dev, "cannot remap memory space\n");
+		ret = -ENXIO;
+		goto error;
+	}
+
+	/* Allow the platform setup code to pass in a MAC address. */
+	if (pdev->dev.platform_data) {
+		struct ethoc_platform_data *pdata =
+			(struct ethoc_platform_data *)pdev->dev.platform_data;
+		memcpy(netdev->dev_addr, pdata->hwaddr, IFHWADDRLEN);
+		priv->phy_id = pdata->phy_id;
+	}
+
+	/* Check that the given MAC address is valid. If it isn't, read the
+	 * current MAC from the controller. */
+	if (!is_valid_ether_addr(netdev->dev_addr))
+		ethoc_get_mac_address(netdev, netdev->dev_addr);
+
+	/* Check the MAC again for validity, if it still isn't choose and
+	 * program a random one. */
+	if (!is_valid_ether_addr(netdev->dev_addr))
+		random_ether_addr(netdev->dev_addr);
+
+	ethoc_set_mac_address(netdev, netdev->dev_addr);
+
+	/* register MII bus */
+	priv->mdio = mdiobus_alloc();
+	if (!priv->mdio) {
+		ret = -ENOMEM;
+		goto free;
+	}
+
+	priv->mdio->name = "ethoc-mdio";
+	snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "%s-%d",
+			priv->mdio->name, pdev->id);
+	priv->mdio->read = ethoc_mdio_read;
+	priv->mdio->write = ethoc_mdio_write;
+	priv->mdio->reset = ethoc_mdio_reset;
+	priv->mdio->priv = priv;
+
+	priv->mdio->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (!priv->mdio->irq) {
+		ret = -ENOMEM;
+		goto free_mdio;
+	}
+
+	for (phy = 0; phy < PHY_MAX_ADDR; phy++)
+		priv->mdio->irq[phy] = PHY_POLL;
+
+	ret = mdiobus_register(priv->mdio);
+	if (ret) {
+		dev_err(&netdev->dev, "failed to register MDIO bus\n");
+		goto free_mdio;
+	}
+
+	ret = ethoc_mdio_probe(netdev);
+	if (ret) {
+		dev_err(&netdev->dev, "failed to probe MDIO bus\n");
+		goto error;
+	}
+
+	ether_setup(netdev);
+
+	/* setup the net_device structure */
+	netdev->netdev_ops = &ethoc_netdev_ops;
+	netdev->watchdog_timeo = ETHOC_TIMEOUT;
+	netdev->features |= 0;
+
+	/* setup NAPI */
+	memset(&priv->napi, 0, sizeof(priv->napi));
+	netif_napi_add(netdev, &priv->napi, ethoc_poll, 64);
+
+	spin_lock_init(&priv->rx_lock);
+	spin_lock_init(&priv->lock);
+
+	ret = register_netdev(netdev);
+	if (ret < 0) {
+		dev_err(&netdev->dev, "failed to register interface\n");
+		goto error;
+	}
+
+	goto out;
+
+error:
+	mdiobus_unregister(priv->mdio);
+free_mdio:
+	kfree(priv->mdio->irq);
+	mdiobus_free(priv->mdio);
+free:
+	free_netdev(netdev);
+out:
+	return ret;
+}
+
+/**
+ * ethoc_remove() - shutdown OpenCores ethernet MAC
+ * @pdev:	platform device
+ */
+static int ethoc_remove(struct platform_device *pdev)
+{
+	struct net_device *netdev = platform_get_drvdata(pdev);
+	struct ethoc *priv = netdev_priv(netdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (netdev) {
+		phy_disconnect(priv->phy);
+		priv->phy = NULL;
+
+		if (priv->mdio) {
+			mdiobus_unregister(priv->mdio);
+			kfree(priv->mdio->irq);
+			mdiobus_free(priv->mdio);
+		}
+
+		unregister_netdev(netdev);
+		free_netdev(netdev);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ethoc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	return -ENOSYS;
+}
+
+static int ethoc_resume(struct platform_device *pdev)
+{
+	return -ENOSYS;
+}
+#else
+# define ethoc_suspend NULL
+# define ethoc_resume  NULL
+#endif
+
+static struct platform_driver ethoc_driver = {
+	.probe   = ethoc_probe,
+	.remove  = ethoc_remove,
+	.suspend = ethoc_suspend,
+	.resume  = ethoc_resume,
+	.driver  = {
+		.name = "ethoc",
+	},
+};
+
+static int __init ethoc_init(void)
+{
+	return platform_driver_register(&ethoc_driver);
+}
+
+static void __exit ethoc_exit(void)
+{
+	platform_driver_unregister(&ethoc_driver);
+}
+
+module_init(ethoc_init);
+module_exit(ethoc_exit);
+
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_DESCRIPTION("OpenCores Ethernet MAC driver");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index b852303c9362..1a685a04d4b2 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -388,6 +388,18 @@ static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq)
 	return err;
 }
 
+static const struct net_device_ops ewrk3_netdev_ops = {
+	.ndo_open		= ewrk3_open,
+	.ndo_start_xmit		= ewrk3_queue_pkt,
+	.ndo_stop		= ewrk3_close,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_do_ioctl		= ewrk3_ioctl,
+	.ndo_tx_timeout		= ewrk3_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __init
 ewrk3_hw_init(struct net_device *dev, u_long iobase)
 {
@@ -603,16 +615,11 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase)
 		printk(version);
 	}
 	/* The EWRK3-specific entries in the device structure. */
-	dev->open = ewrk3_open;
-	dev->hard_start_xmit = ewrk3_queue_pkt;
-	dev->stop = ewrk3_close;
-	dev->set_multicast_list = set_multicast_list;
-	dev->do_ioctl = ewrk3_ioctl;
+	dev->netdev_ops = &ewrk3_netdev_ops;
 	if (lp->adapter_name[4] == '3')
 		SET_ETHTOOL_OPS(dev, &ethtool_ops_203);
 	else
 		SET_ETHTOOL_OPS(dev, &ethtool_ops);
-	dev->tx_timeout = ewrk3_timeout;
 	dev->watchdog_timeo = QUEUE_PKT_TIMEOUT;
 
 	dev->mem_start = 0;
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 9d81e7a48dba..6a38800be3f1 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1239,19 +1239,9 @@ static int gfar_enet_open(struct net_device *dev)
 	return err;
 }
 
-static inline struct txfcb *gfar_add_fcb(struct sk_buff **skbp)
+static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb)
 {
-	struct txfcb *fcb;
-	struct sk_buff *skb = *skbp;
-
-	if (unlikely(skb_headroom(skb) < GMAC_FCB_LEN)) {
-		struct sk_buff *old_skb = skb;
-		skb = skb_realloc_headroom(old_skb, GMAC_FCB_LEN);
-		if (!skb)
-			return NULL;
-		dev_kfree_skb_any(old_skb);
-	}
-	fcb = (struct txfcb *)skb_push(skb, GMAC_FCB_LEN);
+	struct txfcb *fcb = (struct txfcb *)skb_push(skb, GMAC_FCB_LEN);
 	cacheable_memzero(fcb, GMAC_FCB_LEN);
 
 	return fcb;
@@ -1320,6 +1310,22 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	base = priv->tx_bd_base;
 
+	/* make space for additional header when fcb is needed */
+	if (((skb->ip_summed == CHECKSUM_PARTIAL) ||
+			(priv->vlgrp && vlan_tx_tag_present(skb))) &&
+			(skb_headroom(skb) < GMAC_FCB_LEN)) {
+		struct sk_buff *skb_new;
+
+		skb_new = skb_realloc_headroom(skb, GMAC_FCB_LEN);
+		if (!skb_new) {
+			dev->stats.tx_errors++;
+			kfree_skb(skb);
+			return NETDEV_TX_OK;
+		}
+		kfree_skb(skb);
+		skb = skb_new;
+	}
+
 	/* total number of fragments in the SKB */
 	nr_frags = skb_shinfo(skb)->nr_frags;
 
@@ -1372,20 +1378,18 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* Set up checksumming */
 	if (CHECKSUM_PARTIAL == skb->ip_summed) {
-		fcb = gfar_add_fcb(&skb);
-		if (likely(fcb != NULL)) {
-			lstatus |= BD_LFLAG(TXBD_TOE);
-			gfar_tx_checksum(skb, fcb);
-		}
+		fcb = gfar_add_fcb(skb);
+		lstatus |= BD_LFLAG(TXBD_TOE);
+		gfar_tx_checksum(skb, fcb);
 	}
 
 	if (priv->vlgrp && vlan_tx_tag_present(skb)) {
-		if (unlikely(NULL == fcb))
-			fcb = gfar_add_fcb(&skb);
-		if (likely(fcb != NULL)) {
+		if (unlikely(NULL == fcb)) {
+			fcb = gfar_add_fcb(skb);
 			lstatus |= BD_LFLAG(TXBD_TOE);
-			gfar_tx_vlan(skb, fcb);
 		}
+
+		gfar_tx_vlan(skb, fcb);
 	}
 
 	/* setup the TxBD length and buffer pointer for the first BD */
@@ -1433,7 +1437,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Unlock priv */
 	spin_unlock_irqrestore(&priv->txlock, flags);
 
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 /* Stops the kernel queue, and halts the controller */
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 5b5bf9f9861a..c25bc0bc0b25 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -905,6 +905,17 @@ static char *ibmlana_adapter_names[] __devinitdata = {
 	NULL
 };
 
+
+static const struct net_device_ops ibmlana_netdev_ops = {
+	.ndo_open 		= ibmlana_open,
+	.ndo_stop 		= ibmlana_close,
+	.ndo_start_xmit		= ibmlana_tx,
+	.ndo_set_multicast_list = ibmlana_set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __devinit ibmlana_init_one(struct device *kdev)
 {
 	struct mca_device *mdev = to_mca_device(kdev);
@@ -973,11 +984,7 @@ static int __devinit ibmlana_init_one(struct device *kdev)
 	mca_device_set_claim(mdev, 1);
 
 	/* set methods */
-
-	dev->open = ibmlana_open;
-	dev->stop = ibmlana_close;
-	dev->hard_start_xmit = ibmlana_tx;
-	dev->set_multicast_list = ibmlana_set_multicast_list;
+	dev->netdev_ops = &ibmlana_netdev_ops;
 	dev->flags |= IFF_MULTICAST;
 
 	/* copy out MAC address */
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 6f3e7f71658d..6b6548b9fda0 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -1524,6 +1524,13 @@ toshoboe_close (struct pci_dev *pci_dev)
   free_netdev(self->netdev);
 }
 
+static const struct net_device_ops toshoboe_netdev_ops = {
+	.ndo_open	= toshoboe_net_open,
+	.ndo_stop	= toshoboe_net_close,
+	.ndo_start_xmit	= toshoboe_hard_xmit,
+	.ndo_do_ioctl	= toshoboe_net_ioctl,
+};
+
 static int
 toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid)
 {
@@ -1657,10 +1664,7 @@ toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid)
 #endif
 
   SET_NETDEV_DEV(dev, &pci_dev->dev);
-  dev->hard_start_xmit = toshoboe_hard_xmit;
-  dev->open = toshoboe_net_open;
-  dev->stop = toshoboe_net_close;
-  dev->do_ioctl = toshoboe_net_ioctl;
+  dev->netdev_ops = &toshoboe_netdev_ops;
 
   err = register_netdev(dev);
   if (err)
diff --git a/drivers/net/lance.c b/drivers/net/lance.c
index d83d4010656d..633808d447be 100644
--- a/drivers/net/lance.c
+++ b/drivers/net/lance.c
@@ -454,6 +454,18 @@ out:
 }
 #endif
 
+static const struct net_device_ops lance_netdev_ops = {
+	.ndo_open 		= lance_open,
+	.ndo_start_xmit		= lance_start_xmit,
+	.ndo_stop		= lance_close,
+	.ndo_get_stats		= lance_get_stats,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_tx_timeout		= lance_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int options)
 {
 	struct lance_private *lp;
@@ -714,12 +726,7 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int
 		printk(version);
 
 	/* The LANCE-specific entries in the device structure. */
-	dev->open = lance_open;
-	dev->hard_start_xmit = lance_start_xmit;
-	dev->stop = lance_close;
-	dev->get_stats = lance_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-	dev->tx_timeout = lance_tx_timeout;
+	dev->netdev_ops = &lance_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	err = register_netdev(dev);
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
index 4d1a059921c6..d44bddbee373 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/lp486e.c
@@ -952,6 +952,17 @@ static void print_eth(char *add)
 		(unsigned char) add[12], (unsigned char) add[13]);
 }
 
+static const struct net_device_ops i596_netdev_ops = {
+	.ndo_open		= i596_open,
+	.ndo_stop		= i596_close,
+	.ndo_start_xmit		= i596_start_xmit,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_tx_timeout		= i596_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __init lp486e_probe(struct net_device *dev) {
 	struct i596_private *lp;
 	unsigned char eth_addr[6] = { 0, 0xaa, 0, 0, 0, 0 };
@@ -1014,12 +1025,8 @@ static int __init lp486e_probe(struct net_device *dev) {
 	printk("\n");
 
 	/* The LP486E-specific entries in the device structure. */
-	dev->open = &i596_open;
-	dev->stop = &i596_close;
-	dev->hard_start_xmit = &i596_start_xmit;
-	dev->set_multicast_list = &set_multicast_list;
+	dev->netdev_ops = &i596_netdev_ops;
 	dev->watchdog_timeo = 5*HZ;
-	dev->tx_timeout = i596_tx_timeout;
 
 #if 0
 	/* selftest reports 0x320925ae - don't know what that means */
diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c
index a8bcc00c3302..77d44a061703 100644
--- a/drivers/net/ni52.c
+++ b/drivers/net/ni52.c
@@ -441,6 +441,18 @@ out:
 	return ERR_PTR(err);
 }
 
+static const struct net_device_ops ni52_netdev_ops = {
+	.ndo_open		= ni52_open,
+	.ndo_stop		= ni52_close,
+	.ndo_get_stats		= ni52_get_stats,
+	.ndo_tx_timeout 	= ni52_timeout,
+	.ndo_start_xmit 	= ni52_send_packet,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __init ni52_probe1(struct net_device *dev, int ioaddr)
 {
 	int i, size, retval;
@@ -561,15 +573,8 @@ static int __init ni52_probe1(struct net_device *dev, int ioaddr)
 		printk("IRQ %d (assigned and not checked!).\n", dev->irq);
 	}
 
-	dev->open		= ni52_open;
-	dev->stop		= ni52_close;
-	dev->get_stats		= ni52_get_stats;
-	dev->tx_timeout 	= ni52_timeout;
+	dev->netdev_ops		= &ni52_netdev_ops;
 	dev->watchdog_timeo	= HZ/20;
-	dev->hard_start_xmit 	= ni52_send_packet;
-	dev->set_multicast_list = set_multicast_list;
-
-	dev->if_port 		= 0;
 
 	return 0;
 out:
diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c
index df5f869e8d8f..6474f02bf783 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ni65.c
@@ -237,7 +237,7 @@ struct priv
 	void *tmdbounce[TMDNUM];
 	int tmdbouncenum;
 	int lock,xmit_queued;
-	struct net_device_stats stats;
+
 	void *self;
 	int cmdr_addr;
 	int cardno;
@@ -257,7 +257,6 @@ static void  ni65_timeout(struct net_device *dev);
 static int  ni65_close(struct net_device *dev);
 static int  ni65_alloc_buffer(struct net_device *dev);
 static void ni65_free_buffer(struct priv *p);
-static struct net_device_stats *ni65_get_stats(struct net_device *);
 static void set_multicast_list(struct net_device *dev);
 
 static int irqtab[] __initdata = { 9,12,15,5 }; /* irq config-translate */
@@ -401,6 +400,17 @@ out:
 	return ERR_PTR(err);
 }
 
+static const struct net_device_ops ni65_netdev_ops = {
+	.ndo_open		= ni65_open,
+	.ndo_stop		= ni65_close,
+	.ndo_start_xmit		= ni65_send_packet,
+	.ndo_tx_timeout		= ni65_timeout,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /*
  * this is the real card probe ..
  */
@@ -549,13 +559,9 @@ static int __init ni65_probe1(struct net_device *dev,int ioaddr)
 	}
 
 	dev->base_addr = ioaddr;
-	dev->open		= ni65_open;
-	dev->stop		= ni65_close;
-	dev->hard_start_xmit	= ni65_send_packet;
-	dev->tx_timeout		= ni65_timeout;
+	dev->netdev_ops = &ni65_netdev_ops;
 	dev->watchdog_timeo	= HZ/2;
-	dev->get_stats		= ni65_get_stats;
-	dev->set_multicast_list = set_multicast_list;
+
 	return 0; /* everything is OK */
 }
 
@@ -901,13 +907,13 @@ static irqreturn_t ni65_interrupt(int irq, void * dev_id)
 			if(debuglevel > 1)
 				printk(KERN_ERR "%s: general error: %04x.\n",dev->name,csr0);
 			if(csr0 & CSR0_BABL)
-				p->stats.tx_errors++;
+				dev->stats.tx_errors++;
 			if(csr0 & CSR0_MISS) {
 				int i;
 				for(i=0;i<RMDNUM;i++)
 					printk("%02x ",p->rmdhead[i].u.s.status);
 				printk("\n");
-				p->stats.rx_errors++;
+				dev->stats.rx_errors++;
 			}
 			if(csr0 & CSR0_MERR) {
 				if(debuglevel > 1)
@@ -997,12 +1003,12 @@ static void ni65_xmit_intr(struct net_device *dev,int csr0)
 #endif
 		 /* checking some errors */
 			if(tmdp->status2 & XMIT_RTRY)
-				p->stats.tx_aborted_errors++;
+				dev->stats.tx_aborted_errors++;
 			if(tmdp->status2 & XMIT_LCAR)
-				p->stats.tx_carrier_errors++;
+				dev->stats.tx_carrier_errors++;
 			if(tmdp->status2 & (XMIT_BUFF | XMIT_UFLO )) {
 		/* this stops the xmitter */
-				p->stats.tx_fifo_errors++;
+				dev->stats.tx_fifo_errors++;
 				if(debuglevel > 0)
 					printk(KERN_ERR "%s: Xmit FIFO/BUFF error\n",dev->name);
 				if(p->features & INIT_RING_BEFORE_START) {
@@ -1016,12 +1022,12 @@ static void ni65_xmit_intr(struct net_device *dev,int csr0)
 			if(debuglevel > 2)
 				printk(KERN_ERR "%s: xmit-error: %04x %02x-%04x\n",dev->name,csr0,(int) tmdstat,(int) tmdp->status2);
 			if(!(csr0 & CSR0_BABL)) /* don't count errors twice */
-				p->stats.tx_errors++;
+				dev->stats.tx_errors++;
 			tmdp->status2 = 0;
 		}
 		else {
-			p->stats.tx_bytes -= (short)(tmdp->blen);
-			p->stats.tx_packets++;
+			dev->stats.tx_bytes -= (short)(tmdp->blen);
+			dev->stats.tx_packets++;
 		}
 
 #ifdef XMT_VIA_SKB
@@ -1057,7 +1063,7 @@ static void ni65_recv_intr(struct net_device *dev,int csr0)
 			if(!(rmdstat & RCV_ERR)) {
 				if(rmdstat & RCV_START)
 				{
-					p->stats.rx_length_errors++;
+					dev->stats.rx_length_errors++;
 					printk(KERN_ERR "%s: recv, packet too long: %d\n",dev->name,rmdp->mlen & 0x0fff);
 				}
 			}
@@ -1066,16 +1072,16 @@ static void ni65_recv_intr(struct net_device *dev,int csr0)
 					printk(KERN_ERR "%s: receive-error: %04x, lance-status: %04x/%04x\n",
 									dev->name,(int) rmdstat,csr0,(int) inw(PORT+L_DATAREG) );
 				if(rmdstat & RCV_FRAM)
-					p->stats.rx_frame_errors++;
+					dev->stats.rx_frame_errors++;
 				if(rmdstat & RCV_OFLO)
-					p->stats.rx_over_errors++;
+					dev->stats.rx_over_errors++;
 				if(rmdstat & RCV_CRC)
-					p->stats.rx_crc_errors++;
+					dev->stats.rx_crc_errors++;
 				if(rmdstat & RCV_BUF_ERR)
-					p->stats.rx_fifo_errors++;
+					dev->stats.rx_fifo_errors++;
 			}
 			if(!(csr0 & CSR0_MISS)) /* don't count errors twice */
-				p->stats.rx_errors++;
+				dev->stats.rx_errors++;
 		}
 		else if( (len = (rmdp->mlen & 0x0fff) - 4) >= 60)
 		{
@@ -1106,20 +1112,20 @@ static void ni65_recv_intr(struct net_device *dev,int csr0)
 				skb_put(skb,len);
 				skb_copy_to_linear_data(skb, (unsigned char *) p->recvbounce[p->rmdnum],len);
 #endif
-				p->stats.rx_packets++;
-				p->stats.rx_bytes += len;
+				dev->stats.rx_packets++;
+				dev->stats.rx_bytes += len;
 				skb->protocol=eth_type_trans(skb,dev);
 				netif_rx(skb);
 			}
 			else
 			{
 				printk(KERN_ERR "%s: can't alloc new sk_buff\n",dev->name);
-				p->stats.rx_dropped++;
+				dev->stats.rx_dropped++;
 			}
 		}
 		else {
 			printk(KERN_INFO "%s: received runt packet\n",dev->name);
-			p->stats.rx_errors++;
+			dev->stats.rx_errors++;
 		}
 		rmdp->blen = -(R_BUF_SIZE-8);
 		rmdp->mlen = 0;
@@ -1213,23 +1219,6 @@ static int ni65_send_packet(struct sk_buff *skb, struct net_device *dev)
 	return 0;
 }
 
-static struct net_device_stats *ni65_get_stats(struct net_device *dev)
-{
-
-#if 0
-	int i;
-	struct priv *p = dev->ml_priv;
-	for(i=0;i<RMDNUM;i++)
-	{
-		struct rmd *rmdp = p->rmdhead + ((p->rmdnum + i) & (RMDNUM-1));
-		printk("%02x ",rmdp->u.s.status);
-	}
-	printk("\n");
-#endif
-
-	return &((struct priv *)dev->ml_priv)->stats;
-}
-
 static void set_multicast_list(struct net_device *dev)
 {
 	if(!ni65_lance_reinit(dev))
diff --git a/drivers/net/seeq8005.c b/drivers/net/seeq8005.c
index 12a8ffffeb03..ebbbe09725fe 100644
--- a/drivers/net/seeq8005.c
+++ b/drivers/net/seeq8005.c
@@ -143,6 +143,17 @@ out:
 	return ERR_PTR(err);
 }
 
+static const struct net_device_ops seeq8005_netdev_ops = {
+	.ndo_open		= seeq8005_open,
+	.ndo_stop		= seeq8005_close,
+	.ndo_start_xmit 	= seeq8005_send_packet,
+	.ndo_tx_timeout		= seeq8005_timeout,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /* This is the real probe routine.  Linux has a history of friendly device
    probes on the ISA bus.  A good device probes avoids doing writes, and
    verifies that the correct device exists and functions.  */
@@ -332,12 +343,8 @@ static int __init seeq8005_probe1(struct net_device *dev, int ioaddr)
 		 }
 	}
 #endif
-	dev->open		= seeq8005_open;
-	dev->stop		= seeq8005_close;
-	dev->hard_start_xmit 	= seeq8005_send_packet;
-	dev->tx_timeout		= seeq8005_timeout;
+	dev->netdev_ops = &seeq8005_netdev_ops;
 	dev->watchdog_timeo	= HZ/20;
-	dev->set_multicast_list = set_multicast_list;
 	dev->flags &= ~IFF_MULTICAST;
 
 	return 0;
diff --git a/drivers/net/smc-ultra.c b/drivers/net/smc-ultra.c
index 2033fee3143a..0291ea098a06 100644
--- a/drivers/net/smc-ultra.c
+++ b/drivers/net/smc-ultra.c
@@ -142,9 +142,6 @@ static int __init do_ultra_probe(struct net_device *dev)
 	int base_addr = dev->base_addr;
 	int irq = dev->irq;
 
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = &ultra_poll;
-#endif
 	if (base_addr > 0x1ff)		/* Check a single specified location. */
 		return ultra_probe1(dev, base_addr);
 	else if (base_addr != 0)	/* Don't probe at all. */
@@ -199,7 +196,7 @@ static const struct net_device_ops ultra_netdev_ops = {
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller 	= ei_poll,
+	.ndo_poll_controller 	= ultra_poll,
 #endif
 };
 
diff --git a/drivers/net/smc-ultra32.c b/drivers/net/smc-ultra32.c
index cb6c097a2e0a..7a554adc70fb 100644
--- a/drivers/net/smc-ultra32.c
+++ b/drivers/net/smc-ultra32.c
@@ -153,6 +153,22 @@ out:
 	return ERR_PTR(err);
 }
 
+
+static const struct net_device_ops ultra32_netdev_ops = {
+	.ndo_open 		= ultra32_open,
+	.ndo_stop 		= ultra32_close,
+	.ndo_start_xmit		= ei_start_xmit,
+	.ndo_tx_timeout		= ei_tx_timeout,
+	.ndo_get_stats		= ei_get_stats,
+	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= ei_poll,
+#endif
+};
+
 static int __init ultra32_probe1(struct net_device *dev, int ioaddr)
 {
 	int i, edge, media, retval;
@@ -273,11 +289,8 @@ static int __init ultra32_probe1(struct net_device *dev, int ioaddr)
 	ei_status.block_output = &ultra32_block_output;
 	ei_status.get_8390_hdr = &ultra32_get_8390_hdr;
 	ei_status.reset_8390 = &ultra32_reset_8390;
-	dev->open = &ultra32_open;
-	dev->stop = &ultra32_close;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = ei_poll;
-#endif
+
+	dev->netdev_ops = &ultra32_netdev_ops;
 	NS8390_init(dev, 0);
 
 	return 0;
diff --git a/drivers/net/smc9194.c b/drivers/net/smc9194.c
index 18d653bbd4e0..9a7973a54116 100644
--- a/drivers/net/smc9194.c
+++ b/drivers/net/smc9194.c
@@ -831,6 +831,17 @@ static int __init smc_findirq(int ioaddr)
 #endif
 }
 
+static const struct net_device_ops smc_netdev_ops = {
+	.ndo_open		 = smc_open,
+	.ndo_stop		= smc_close,
+	.ndo_start_xmit    	= smc_wait_to_send_packet,
+	.ndo_tx_timeout	    	= smc_timeout,
+	.ndo_set_multicast_list	= smc_set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /*----------------------------------------------------------------------
  . Function: smc_probe( int ioaddr )
  .
@@ -1044,12 +1055,8 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
   	  	goto err_out;
       	}
 
-	dev->open		        = smc_open;
-	dev->stop		        = smc_close;
-	dev->hard_start_xmit    	= smc_wait_to_send_packet;
-	dev->tx_timeout		    	= smc_timeout;
+	dev->netdev_ops			= &smc_netdev_ops;
 	dev->watchdog_timeo		= HZ/20;
-	dev->set_multicast_list 	= smc_set_multicast_list;
 
 	return 0;
 
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index ad3cbc91a8fa..af8f60ca0f57 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1680,6 +1680,7 @@ static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata,
 					  u8 address, u8 data)
 {
 	u32 op = E2P_CMD_EPC_CMD_ERASE_ | address;
+	u32 temp;
 	int ret;
 
 	SMSC_TRACE(DRV, "address 0x%x, data 0x%x", address, data);
@@ -1688,6 +1689,10 @@ static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata,
 	if (!ret) {
 		op = E2P_CMD_EPC_CMD_WRITE_ | address;
 		smsc911x_reg_write(pdata, E2P_DATA, (u32)data);
+
+		/* Workaround for hardware read-after-write restriction */
+		temp = smsc911x_reg_read(pdata, BYTE_TEST);
+
 		ret = smsc911x_eeprom_send_cmd(pdata, op);
 	}
 
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
index 193308118f95..456f8bff40be 100644
--- a/drivers/net/tokenring/madgemc.c
+++ b/drivers/net/tokenring/madgemc.c
@@ -142,7 +142,7 @@ static void madgemc_sifwritew(struct net_device *dev, unsigned short val, unsign
 	return;
 }
 
-
+static struct net_device_ops madgemc_netdev_ops __read_mostly;
 
 static int __devinit madgemc_probe(struct device *device)
 {	
@@ -168,7 +168,7 @@ static int __devinit madgemc_probe(struct device *device)
 		goto getout;
 	}
 
-	dev->dma = 0;
+	dev->netdev_ops = &madgemc_netdev_ops;
 
 	card = kmalloc(sizeof(struct card_info), GFP_KERNEL);
 	if (card==NULL) {
@@ -348,9 +348,6 @@ static int __devinit madgemc_probe(struct device *device)
 
 	memcpy(tp->ProductID, "Madge MCA 16/4    ", PROD_ID_SIZE + 1);
 
-	dev->open = madgemc_open;
-	dev->stop = madgemc_close;
-
 	tp->tmspriv = card;
 	dev_set_drvdata(device, dev);
 
@@ -758,6 +755,10 @@ static struct mca_driver madgemc_driver = {
 
 static int __init madgemc_init (void)
 {
+	madgemc_netdev_ops = tms380tr_netdev_ops;
+	madgemc_netdev_ops.ndo_open = madgemc_open;
+	madgemc_netdev_ops.ndo_stop = madgemc_close;
+
 	return mca_register_driver (&madgemc_driver);
 }
 
diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c
index b8c955f6d31a..16e8783ee9cd 100644
--- a/drivers/net/tokenring/proteon.c
+++ b/drivers/net/tokenring/proteon.c
@@ -116,6 +116,8 @@ nodev:
 	return -ENODEV;
 }
 
+static struct net_device_ops proteon_netdev_ops __read_mostly;
+
 static int __init setup_card(struct net_device *dev, struct device *pdev)
 {
 	struct net_local *tp;
@@ -167,8 +169,7 @@ static int __init setup_card(struct net_device *dev, struct device *pdev)
 
 	tp->tmspriv = NULL;
 
-	dev->open = proteon_open;
-	dev->stop = tms380tr_close;
+	dev->netdev_ops = &proteon_netdev_ops;
 
 	if (dev->irq == 0)
 	{
@@ -352,6 +353,10 @@ static int __init proteon_init(void)
 	struct platform_device *pdev;
 	int i, num = 0, err = 0;
 
+	proteon_netdev_ops = tms380tr_netdev_ops;
+	proteon_netdev_ops.ndo_open = proteon_open;
+	proteon_netdev_ops.ndo_stop = tms380tr_close;
+
 	err = platform_driver_register(&proteon_driver);
 	if (err)
 		return err;
diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c
index c0f58f08782c..46db5c5395b2 100644
--- a/drivers/net/tokenring/skisa.c
+++ b/drivers/net/tokenring/skisa.c
@@ -133,6 +133,8 @@ static int __init sk_isa_probe1(struct net_device *dev, int ioaddr)
 	return 0;
 }
 
+static struct net_device_ops sk_isa_netdev_ops __read_mostly;
+
 static int __init setup_card(struct net_device *dev, struct device *pdev)
 {
 	struct net_local *tp;
@@ -184,8 +186,7 @@ static int __init setup_card(struct net_device *dev, struct device *pdev)
 
 	tp->tmspriv = NULL;
 
-	dev->open = sk_isa_open;
-	dev->stop = tms380tr_close;
+	dev->netdev_ops = &sk_isa_netdev_ops;
 
 	if (dev->irq == 0)
 	{
@@ -362,6 +363,10 @@ static int __init sk_isa_init(void)
 	struct platform_device *pdev;
 	int i, num = 0, err = 0;
 
+	sk_isa_netdev_ops = tms380tr_netdev_ops;
+	sk_isa_netdev_ops.ndo_open = sk_isa_open;
+	sk_isa_netdev_ops.ndo_stop = tms380tr_close;
+
 	err = platform_driver_register(&sk_isa_driver);
 	if (err)
 		return err;
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 9d7db2c8d661..a91d9c55d78e 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -124,7 +124,6 @@ static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev);
 static int smctr_get_physical_drop_number(struct net_device *dev);
 static __u8 *smctr_get_rx_pointer(struct net_device *dev, short queue);
 static int smctr_get_station_id(struct net_device *dev);
-static struct net_device_stats *smctr_get_stats(struct net_device *dev);
 static FCBlock *smctr_get_tx_fcb(struct net_device *dev, __u16 queue,
         __u16 bytes_count);
 static int smctr_get_upstream_neighbor_addr(struct net_device *dev);
@@ -3633,6 +3632,14 @@ out:
 	return ERR_PTR(err);
 }
 
+static const struct net_device_ops smctr_netdev_ops = {
+	.ndo_open          = smctr_open,
+	.ndo_stop          = smctr_close,
+	.ndo_start_xmit    = smctr_send_packet,
+	.ndo_tx_timeout	   = smctr_timeout,
+	.ndo_get_stats     = smctr_get_stats,
+	.ndo_set_multicast_list = smctr_set_multicast_list,
+};
 
 static int __init smctr_probe1(struct net_device *dev, int ioaddr)
 {
@@ -3683,13 +3690,8 @@ static int __init smctr_probe1(struct net_device *dev, int ioaddr)
                 (unsigned int)dev->base_addr,
                 dev->irq, tp->rom_base, tp->ram_base);
 
-        dev->open               = smctr_open;
-        dev->stop               = smctr_close;
-        dev->hard_start_xmit    = smctr_send_packet;
-        dev->tx_timeout		= smctr_timeout;
+	dev->netdev_ops = &smctr_netdev_ops;
         dev->watchdog_timeo	= HZ;
-        dev->get_stats          = smctr_get_stats;
-        dev->set_multicast_list = &smctr_set_multicast_list;
         return (0);
 
 out:
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index a110326dce6f..86a479f61c0c 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2009,6 +2009,9 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)
 	/* Disable Rx and Tx */
 	clrbits32(&ug_regs->maccfg1, MACCFG1_ENABLE_RX | MACCFG1_ENABLE_TX);
 
+	phy_disconnect(ugeth->phydev);
+	ugeth->phydev = NULL;
+
 	ucc_geth_memclean(ugeth);
 }
 
@@ -3345,6 +3348,14 @@ static int ucc_geth_open(struct net_device *dev)
 		return -EINVAL;
 	}
 
+	err = init_phy(dev);
+	if (err) {
+		if (netif_msg_ifup(ugeth))
+			ugeth_err("%s: Cannot initialize PHY, aborting.",
+				  dev->name);
+		return err;
+	}
+
 	err = ucc_struct_init(ugeth);
 	if (err) {
 		if (netif_msg_ifup(ugeth))
@@ -3381,13 +3392,6 @@ static int ucc_geth_open(struct net_device *dev)
 				   &ugeth->ug_regs->macstnaddr1,
 				   &ugeth->ug_regs->macstnaddr2);
 
-	err = init_phy(dev);
-	if (err) {
-		if (netif_msg_ifup(ugeth))
-			ugeth_err("%s: Cannot initialize PHY, aborting.", dev->name);
-		goto out_err;
-	}
-
 	phy_start(ugeth->phydev);
 
 	err = ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
@@ -3430,9 +3434,6 @@ static int ucc_geth_close(struct net_device *dev)
 
 	free_irq(ugeth->ug_info->uf_info.irq, ugeth->dev);
 
-	phy_disconnect(ugeth->phydev);
-	ugeth->phydev = NULL;
-
 	netif_stop_queue(dev);
 
 	return 0;
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index 6a07ba9371db..1d637f407a0c 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -714,19 +714,19 @@ static int sdla_transmit(struct sk_buff *skb, struct net_device *dev)
 		switch (ret)
 		{
 			case SDLA_RET_OK:
-				flp->stats.tx_packets++;
+				dev->stats.tx_packets++;
 				ret = DLCI_RET_OK;
 				break;
 
 			case SDLA_RET_CIR_OVERFLOW:
 			case SDLA_RET_BUF_OVERSIZE:
 			case SDLA_RET_NO_BUFS:
-				flp->stats.tx_dropped++;
+				dev->stats.tx_dropped++;
 				ret = DLCI_RET_DROP;
 				break;
 
 			default:
-				flp->stats.tx_errors++;
+				dev->stats.tx_errors++;
 				ret = DLCI_RET_ERR;
 				break;
 		}
@@ -807,7 +807,7 @@ static void sdla_receive(struct net_device *dev)
 		if (i == CONFIG_DLCI_MAX)
 		{
 			printk(KERN_NOTICE "%s: Received packet from invalid DLCI %i, ignoring.", dev->name, dlci);
-			flp->stats.rx_errors++;
+			dev->stats.rx_errors++;
 			success = 0;
 		}
 	}
@@ -819,7 +819,7 @@ static void sdla_receive(struct net_device *dev)
 		if (skb == NULL) 
 		{
 			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-			flp->stats.rx_dropped++; 
+			dev->stats.rx_dropped++;
 			success = 0;
 		}
 		else
@@ -859,7 +859,7 @@ static void sdla_receive(struct net_device *dev)
 
 	if (success)
 	{
-		flp->stats.rx_packets++;
+		dev->stats.rx_packets++;
 		dlp = netdev_priv(master);
 		(*dlp->receive)(skb, master);
 	}
@@ -1590,13 +1590,14 @@ fail:
 	return err;
 }
  
-static struct net_device_stats *sdla_stats(struct net_device *dev)
-{
-	struct frad_local *flp;
-	flp = netdev_priv(dev);
-
-	return(&flp->stats);
-}
+static const struct net_device_ops sdla_netdev_ops = {
+	.ndo_open	= sdla_open,
+	.ndo_stop	= sdla_close,
+	.ndo_do_ioctl	= sdla_ioctl,
+	.ndo_set_config	= sdla_set_config,
+	.ndo_start_xmit	= sdla_transmit,
+	.ndo_change_mtu	= sdla_change_mtu,
+};
 
 static void setup_sdla(struct net_device *dev)
 {
@@ -1604,20 +1605,13 @@ static void setup_sdla(struct net_device *dev)
 
 	netdev_boot_setup_check(dev);
 
+	dev->netdev_ops		= &sdla_netdev_ops;
 	dev->flags		= 0;
 	dev->type		= 0xFFFF;
 	dev->hard_header_len	= 0;
 	dev->addr_len		= 0;
 	dev->mtu		= SDLA_MAX_MTU;
 
-	dev->open		= sdla_open;
-	dev->stop		= sdla_close;
-	dev->do_ioctl		= sdla_ioctl;
-	dev->set_config		= sdla_set_config;
-	dev->get_stats		= sdla_stats;
-	dev->hard_start_xmit	= sdla_transmit;
-	dev->change_mtu		= sdla_change_mtu;
-
 	flp->activate		= sdla_activate;
 	flp->deactivate		= sdla_deactivate;
 	flp->assoc		= sdla_assoc;
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 612fffe100a6..8a0823588c51 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -485,6 +485,7 @@ config MWL8K
 source "drivers/net/wireless/p54/Kconfig"
 source "drivers/net/wireless/ath5k/Kconfig"
 source "drivers/net/wireless/ath9k/Kconfig"
+source "drivers/net/wireless/ar9170/Kconfig"
 source "drivers/net/wireless/ipw2x00/Kconfig"
 source "drivers/net/wireless/iwlwifi/Kconfig"
 source "drivers/net/wireless/hostap/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index d780487c420f..50e7fba7f0ea 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -57,5 +57,6 @@ obj-$(CONFIG_P54_COMMON)	+= p54/
 
 obj-$(CONFIG_ATH5K)	+= ath5k/
 obj-$(CONFIG_ATH9K)	+= ath9k/
+obj-$(CONFIG_AR9170_USB)	+= ar9170/
 
 obj-$(CONFIG_MAC80211_HWSIM)	+= mac80211_hwsim.o
diff --git a/drivers/net/wireless/ar9170/Kconfig b/drivers/net/wireless/ar9170/Kconfig
new file mode 100644
index 000000000000..de4281fda129
--- /dev/null
+++ b/drivers/net/wireless/ar9170/Kconfig
@@ -0,0 +1,17 @@
+config AR9170_USB
+	tristate "Atheros AR9170 802.11n USB support"
+	depends on USB && MAC80211 && WLAN_80211 && EXPERIMENTAL
+	select FW_LOADER
+	help
+	  This is a driver for the Atheros "otus" 802.11n USB devices.
+
+	  These devices require additional firmware (2 files).
+	  For now, these files can be downloaded from here:
+	  http://wireless.kernel.org/en/users/Drivers/ar9170
+
+	  If you choose to build a module, it'll be called ar9170usb.
+
+config AR9170_LEDS
+	bool
+	depends on AR9170_USB && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_USB)
+	default y
diff --git a/drivers/net/wireless/ar9170/Makefile b/drivers/net/wireless/ar9170/Makefile
new file mode 100644
index 000000000000..8d91c7ee3215
--- /dev/null
+++ b/drivers/net/wireless/ar9170/Makefile
@@ -0,0 +1,3 @@
+ar9170usb-objs := usb.o main.o cmd.o mac.o phy.o led.o
+
+obj-$(CONFIG_AR9170_USB) += ar9170usb.o
diff --git a/drivers/net/wireless/ar9170/ar9170.h b/drivers/net/wireless/ar9170/ar9170.h
new file mode 100644
index 000000000000..f4fb2e94aea0
--- /dev/null
+++ b/drivers/net/wireless/ar9170/ar9170.h
@@ -0,0 +1,209 @@
+/*
+ * Atheros AR9170 driver
+ *
+ * Driver specific definitions
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *    Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ *    Permission to use, copy, modify, and/or distribute this software for any
+ *    purpose with or without fee is hereby granted, provided that the above
+ *    copyright notice and this permission notice appear in all copies.
+ *
+ *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef __AR9170_H
+#define __AR9170_H
+
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+#include <net/wireless.h>
+#include <net/mac80211.h>
+#ifdef CONFIG_AR9170_LEDS
+#include <linux/leds.h>
+#endif /* CONFIG_AR9170_LEDS */
+#include "eeprom.h"
+#include "hw.h"
+
+#define PAYLOAD_MAX	(AR9170_MAX_CMD_LEN/4 - 1)
+
+enum ar9170_bw {
+	AR9170_BW_20,
+	AR9170_BW_40_BELOW,
+	AR9170_BW_40_ABOVE,
+
+	__AR9170_NUM_BW,
+};
+
+enum ar9170_rf_init_mode {
+	AR9170_RFI_NONE,
+	AR9170_RFI_WARM,
+	AR9170_RFI_COLD,
+};
+
+#define AR9170_MAX_RX_BUFFER_SIZE		8192
+
+#ifdef CONFIG_AR9170_LEDS
+struct ar9170;
+
+struct ar9170_led {
+	struct ar9170 *ar;
+	struct led_classdev l;
+	char name[32];
+	unsigned int toggled;
+	bool registered;
+};
+
+#endif /* CONFIG_AR9170_LEDS */
+
+enum ar9170_device_state {
+	AR9170_UNKNOWN_STATE,
+	AR9170_STOPPED,
+	AR9170_IDLE,
+	AR9170_STARTED,
+	AR9170_ASSOCIATED,
+};
+
+struct ar9170 {
+	struct ieee80211_hw *hw;
+	struct mutex mutex;
+	enum ar9170_device_state state;
+
+	int (*open)(struct ar9170 *);
+	void (*stop)(struct ar9170 *);
+	int (*tx)(struct ar9170 *, struct sk_buff *, bool, unsigned int);
+	int (*exec_cmd)(struct ar9170 *, enum ar9170_cmd, u32 ,
+			void *, u32 , void *);
+	void (*callback_cmd)(struct ar9170 *, u32 , void *);
+
+	/* interface mode settings */
+	struct ieee80211_vif *vif;
+	u8 mac_addr[ETH_ALEN];
+	u8 bssid[ETH_ALEN];
+
+	/* beaconing */
+	struct sk_buff *beacon;
+	struct work_struct beacon_work;
+
+	/* cryptographic engine */
+	u64 usedkeys;
+	bool rx_software_decryption;
+	bool disable_offload;
+
+	/* filter settings */
+	struct work_struct filter_config_work;
+	u64 cur_mc_hash, want_mc_hash;
+	u32 cur_filter, want_filter;
+	unsigned int filter_changed;
+	bool sniffer_enabled;
+
+	/* PHY */
+	struct ieee80211_channel *channel;
+	int noise[4];
+
+	/* power calibration data */
+	u8 power_5G_leg[4];
+	u8 power_2G_cck[4];
+	u8 power_2G_ofdm[4];
+	u8 power_5G_ht20[8];
+	u8 power_5G_ht40[8];
+	u8 power_2G_ht20[8];
+	u8 power_2G_ht40[8];
+
+#ifdef CONFIG_AR9170_LEDS
+	struct delayed_work led_work;
+	struct ar9170_led leds[AR9170_NUM_LEDS];
+#endif /* CONFIG_AR9170_LEDS */
+
+	/* qos queue settings */
+	spinlock_t tx_stats_lock;
+	struct ieee80211_tx_queue_stats tx_stats[5];
+	struct ieee80211_tx_queue_params edcf[5];
+
+	spinlock_t cmdlock;
+	__le32 cmdbuf[PAYLOAD_MAX + 1];
+
+	/* MAC statistics */
+	struct ieee80211_low_level_stats stats;
+
+	/* EEPROM */
+	struct ar9170_eeprom eeprom;
+
+	/* global tx status for unregistered Stations. */
+	struct sk_buff_head global_tx_status;
+	struct sk_buff_head global_tx_status_waste;
+	struct delayed_work tx_status_janitor;
+};
+
+struct ar9170_sta_info {
+	struct sk_buff_head tx_status[__AR9170_NUM_TXQ];
+};
+
+#define IS_STARTED(a)		(a->state >= AR9170_STARTED)
+#define IS_ACCEPTING_CMD(a)	(a->state >= AR9170_IDLE)
+
+#define AR9170_FILTER_CHANGED_PROMISC		BIT(0)
+#define AR9170_FILTER_CHANGED_MULTICAST		BIT(1)
+#define AR9170_FILTER_CHANGED_FRAMEFILTER	BIT(2)
+
+/* exported interface */
+void *ar9170_alloc(size_t priv_size);
+int ar9170_register(struct ar9170 *ar, struct device *pdev);
+void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb);
+void ar9170_unregister(struct ar9170 *ar);
+void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb,
+			     bool update_statistics, u16 tx_status);
+
+/* MAC */
+int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
+int ar9170_init_mac(struct ar9170 *ar);
+int ar9170_set_qos(struct ar9170 *ar);
+int ar9170_update_multicast(struct ar9170 *ar);
+int ar9170_update_frame_filter(struct ar9170 *ar);
+int ar9170_set_operating_mode(struct ar9170 *ar);
+int ar9170_set_beacon_timers(struct ar9170 *ar);
+int ar9170_set_hwretry_limit(struct ar9170 *ar, u32 max_retry);
+int ar9170_update_beacon(struct ar9170 *ar);
+void ar9170_new_beacon(struct work_struct *work);
+int ar9170_upload_key(struct ar9170 *ar, u8 id, const u8 *mac, u8 ktype,
+		      u8 keyidx, u8 *keydata, int keylen);
+int ar9170_disable_key(struct ar9170 *ar, u8 id);
+
+/* LEDs */
+#ifdef CONFIG_AR9170_LEDS
+int ar9170_register_leds(struct ar9170 *ar);
+void ar9170_unregister_leds(struct ar9170 *ar);
+#endif /* CONFIG_AR9170_LEDS */
+int ar9170_init_leds(struct ar9170 *ar);
+int ar9170_set_leds_state(struct ar9170 *ar, u32 led_state);
+
+/* PHY / RF */
+int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band);
+int ar9170_init_rf(struct ar9170 *ar);
+int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
+		       enum ar9170_rf_init_mode rfi, enum ar9170_bw bw);
+
+#endif /* __AR9170_H */
diff --git a/drivers/net/wireless/ar9170/cmd.c b/drivers/net/wireless/ar9170/cmd.c
new file mode 100644
index 000000000000..f57a6200167b
--- /dev/null
+++ b/drivers/net/wireless/ar9170/cmd.c
@@ -0,0 +1,129 @@
+/*
+ * Atheros AR9170 driver
+ *
+ * Basic HW register/memory/command access functions
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *    Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ *    Permission to use, copy, modify, and/or distribute this software for any
+ *    purpose with or without fee is hereby granted, provided that the above
+ *    copyright notice and this permission notice appear in all copies.
+ *
+ *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ar9170.h"
+#include "cmd.h"
+
+int ar9170_write_mem(struct ar9170 *ar, const __le32 *data, size_t len)
+{
+	int err;
+
+	if (unlikely(!IS_ACCEPTING_CMD(ar)))
+		return 0;
+
+	err = ar->exec_cmd(ar, AR9170_CMD_WMEM, len, (u8 *) data, 0, NULL);
+	if (err)
+		printk(KERN_DEBUG "%s: writing memory failed\n",
+		       wiphy_name(ar->hw->wiphy));
+	return err;
+}
+
+int ar9170_write_reg(struct ar9170 *ar, const u32 reg, const u32 val)
+{
+	__le32 buf[2] = {
+		cpu_to_le32(reg),
+		cpu_to_le32(val),
+	};
+	int err;
+
+	if (unlikely(!IS_ACCEPTING_CMD(ar)))
+		return 0;
+
+	err = ar->exec_cmd(ar, AR9170_CMD_WREG, sizeof(buf),
+			   (u8 *) buf, 0, NULL);
+	if (err)
+		printk(KERN_DEBUG "%s: writing reg %#x (val %#x) failed\n",
+		       wiphy_name(ar->hw->wiphy), reg, val);
+	return err;
+}
+
+static int ar9170_read_mreg(struct ar9170 *ar, int nregs,
+			    const u32 *regs, u32 *out)
+{
+	int i, err;
+	__le32 *offs, *res;
+
+	if (unlikely(!IS_ACCEPTING_CMD(ar)))
+		return 0;
+
+	/* abuse "out" for the register offsets, must be same length */
+	offs = (__le32 *)out;
+	for (i = 0; i < nregs; i++)
+		offs[i] = cpu_to_le32(regs[i]);
+
+	/* also use the same buffer for the input */
+	res = (__le32 *)out;
+
+	err = ar->exec_cmd(ar, AR9170_CMD_RREG,
+			   4 * nregs, (u8 *)offs,
+			   4 * nregs, (u8 *)res);
+	if (err)
+		return err;
+
+	/* convert result to cpu endian */
+	for (i = 0; i < nregs; i++)
+		out[i] = le32_to_cpu(res[i]);
+
+	return 0;
+}
+
+int ar9170_read_reg(struct ar9170 *ar, u32 reg, u32 *val)
+{
+	return ar9170_read_mreg(ar, 1, &reg, val);
+}
+
+int ar9170_echo_test(struct ar9170 *ar, u32 v)
+{
+	__le32 echobuf = cpu_to_le32(v);
+	__le32 echores;
+	int err;
+
+	if (unlikely(!IS_ACCEPTING_CMD(ar)))
+		return -ENODEV;
+
+	err = ar->exec_cmd(ar, AR9170_CMD_ECHO,
+			   4, (u8 *)&echobuf,
+			   4, (u8 *)&echores);
+	if (err)
+		return err;
+
+	if (echobuf != echores)
+		return -EINVAL;
+
+	return 0;
+}
diff --git a/drivers/net/wireless/ar9170/cmd.h b/drivers/net/wireless/ar9170/cmd.h
new file mode 100644
index 000000000000..a4f0e50e52b4
--- /dev/null
+++ b/drivers/net/wireless/ar9170/cmd.h
@@ -0,0 +1,91 @@
+/*
+ * Atheros AR9170 driver
+ *
+ * Basic HW register/memory/command access functions
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *    Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ *    Permission to use, copy, modify, and/or distribute this software for any
+ *    purpose with or without fee is hereby granted, provided that the above
+ *    copyright notice and this permission notice appear in all copies.
+ *
+ *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef __CMD_H
+#define __CMD_H
+
+#include "ar9170.h"
+
+/* basic HW access */
+int ar9170_write_mem(struct ar9170 *ar, const __le32 *data, size_t len);
+int ar9170_write_reg(struct ar9170 *ar, const u32 reg, const u32 val);
+int ar9170_read_reg(struct ar9170 *ar, u32 reg, u32 *val);
+int ar9170_echo_test(struct ar9170 *ar, u32 v);
+
+/*
+ * Macros to facilitate writing multiple registers in a single
+ * write-combining USB command. Note that when the first group
+ * fails the whole thing will fail without any others attempted,
+ * but you won't know which write in the group failed.
+ */
+#define ar9170_regwrite_begin(ar)					\
+do {									\
+	int __nreg = 0, __err = 0;					\
+	struct ar9170 *__ar = ar;
+
+#define ar9170_regwrite(r, v) do {					\
+	__ar->cmdbuf[2 * __nreg + 1] = cpu_to_le32(r);			\
+	__ar->cmdbuf[2 * __nreg + 2] = cpu_to_le32(v);			\
+	__nreg++;							\
+	if ((__nreg >= PAYLOAD_MAX/2)) {				\
+		if (IS_ACCEPTING_CMD(__ar))				\
+			__err = ar->exec_cmd(__ar, AR9170_CMD_WREG,	\
+					     8 * __nreg,		\
+					     (u8 *) &__ar->cmdbuf[1],	\
+					     0, NULL);			\
+		__nreg = 0;						\
+		if (__err)						\
+			goto __regwrite_out;				\
+	}								\
+} while (0)
+
+#define ar9170_regwrite_finish()					\
+__regwrite_out :							\
+	if (__nreg) {							\
+		if (IS_ACCEPTING_CMD(__ar))				\
+			__err = ar->exec_cmd(__ar, AR9170_CMD_WREG,	\
+					     8 * __nreg, 		\
+					     (u8 *) &__ar->cmdbuf[1],	\
+					     0, NULL);			\
+		__nreg = 0;						\
+	}
+
+#define ar9170_regwrite_result()					\
+	__err;								\
+} while (0);
+
+#endif /* __CMD_H */
diff --git a/drivers/net/wireless/ar9170/eeprom.h b/drivers/net/wireless/ar9170/eeprom.h
new file mode 100644
index 000000000000..d2c8cc83f1dd
--- /dev/null
+++ b/drivers/net/wireless/ar9170/eeprom.h
@@ -0,0 +1,179 @@
+/*
+ * Atheros AR9170 driver
+ *
+ * EEPROM layout
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *    Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ *    Permission to use, copy, modify, and/or distribute this software for any
+ *    purpose with or without fee is hereby granted, provided that the above
+ *    copyright notice and this permission notice appear in all copies.
+ *
+ *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef __AR9170_EEPROM_H
+#define __AR9170_EEPROM_H
+
+#define AR5416_MAX_CHAINS		2
+#define AR5416_MODAL_SPURS		5
+
+struct ar9170_eeprom_modal {
+	__le32	antCtrlChain[AR5416_MAX_CHAINS];
+	__le32	antCtrlCommon;
+	s8	antennaGainCh[AR5416_MAX_CHAINS];
+	u8	switchSettling;
+	u8	txRxAttenCh[AR5416_MAX_CHAINS];
+	u8	rxTxMarginCh[AR5416_MAX_CHAINS];
+	s8	adcDesiredSize;
+	s8	pgaDesiredSize;
+	u8	xlnaGainCh[AR5416_MAX_CHAINS];
+	u8	txEndToXpaOff;
+	u8	txEndToRxOn;
+	u8	txFrameToXpaOn;
+	u8	thresh62;
+	s8	noiseFloorThreshCh[AR5416_MAX_CHAINS];
+	u8	xpdGain;
+	u8	xpd;
+	s8	iqCalICh[AR5416_MAX_CHAINS];
+	s8	iqCalQCh[AR5416_MAX_CHAINS];
+	u8	pdGainOverlap;
+	u8	ob;
+	u8	db;
+	u8	xpaBiasLvl;
+	u8	pwrDecreaseFor2Chain;
+	u8	pwrDecreaseFor3Chain;
+	u8	txFrameToDataStart;
+	u8	txFrameToPaOn;
+	u8	ht40PowerIncForPdadc;
+	u8	bswAtten[AR5416_MAX_CHAINS];
+	u8	bswMargin[AR5416_MAX_CHAINS];
+	u8	swSettleHt40;
+	u8	reserved[22];
+	struct spur_channel {
+		__le16 spurChan;
+		u8	spurRangeLow;
+		u8	spurRangeHigh;
+	} __packed spur_channels[AR5416_MODAL_SPURS];
+} __packed;
+
+#define AR5416_NUM_PD_GAINS		4
+#define AR5416_PD_GAIN_ICEPTS		5
+
+struct ar9170_calibration_data_per_freq {
+	u8	pwr_pdg[AR5416_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
+	u8	vpd_pdg[AR5416_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
+} __packed;
+
+#define AR5416_NUM_5G_CAL_PIERS		8
+#define AR5416_NUM_2G_CAL_PIERS		4
+
+#define AR5416_NUM_5G_TARGET_PWRS	8
+#define AR5416_NUM_2G_CCK_TARGET_PWRS	3
+#define AR5416_NUM_2G_OFDM_TARGET_PWRS	4
+#define AR5416_MAX_NUM_TGT_PWRS		8
+
+struct ar9170_calibration_target_power_legacy {
+	u8	freq;
+	u8	power[4];
+} __packed;
+
+struct ar9170_calibration_target_power_ht {
+	u8	freq;
+	u8	power[8];
+} __packed;
+
+#define AR5416_NUM_CTLS			24
+
+struct ar9170_calctl_edges {
+	u8	channel;
+#define AR9170_CALCTL_EDGE_FLAGS	0xC0
+	u8	power_flags;
+} __packed;
+
+#define AR5416_NUM_BAND_EDGES		8
+
+struct ar9170_calctl_data {
+	struct ar9170_calctl_edges
+		control_edges[AR5416_MAX_CHAINS][AR5416_NUM_BAND_EDGES];
+} __packed;
+
+
+struct ar9170_eeprom {
+	__le16	length;
+	__le16	checksum;
+	__le16	version;
+	u8	operating_flags;
+#define AR9170_OPFLAG_5GHZ 		1
+#define AR9170_OPFLAG_2GHZ 		2
+	u8	misc;
+	__le16	reg_domain[2];
+	u8	mac_address[6];
+	u8	rx_mask;
+	u8	tx_mask;
+	__le16	rf_silent;
+	__le16	bluetooth_options;
+	__le16	device_capabilities;
+	__le32	build_number;
+	u8	deviceType;
+	u8	reserved[33];
+
+	u8	customer_data[64];
+
+	struct ar9170_eeprom_modal
+		modal_header[2];
+
+	u8	cal_freq_pier_5G[AR5416_NUM_5G_CAL_PIERS];
+	u8	cal_freq_pier_2G[AR5416_NUM_2G_CAL_PIERS];
+
+	struct ar9170_calibration_data_per_freq
+		cal_pier_data_5G[AR5416_MAX_CHAINS][AR5416_NUM_5G_CAL_PIERS],
+		cal_pier_data_2G[AR5416_MAX_CHAINS][AR5416_NUM_2G_CAL_PIERS];
+
+	/* power calibration data */
+	struct ar9170_calibration_target_power_legacy
+		cal_tgt_pwr_5G[AR5416_NUM_5G_TARGET_PWRS];
+	struct ar9170_calibration_target_power_ht
+		cal_tgt_pwr_5G_ht20[AR5416_NUM_5G_TARGET_PWRS],
+		cal_tgt_pwr_5G_ht40[AR5416_NUM_5G_TARGET_PWRS];
+
+	struct ar9170_calibration_target_power_legacy
+		cal_tgt_pwr_2G_cck[AR5416_NUM_2G_CCK_TARGET_PWRS],
+		cal_tgt_pwr_2G_ofdm[AR5416_NUM_2G_OFDM_TARGET_PWRS];
+	struct ar9170_calibration_target_power_ht
+		cal_tgt_pwr_2G_ht20[AR5416_NUM_2G_OFDM_TARGET_PWRS],
+		cal_tgt_pwr_2G_ht40[AR5416_NUM_2G_OFDM_TARGET_PWRS];
+
+	/* conformance testing limits */
+	u8	ctl_index[AR5416_NUM_CTLS];
+	struct ar9170_calctl_data
+		ctl_data[AR5416_NUM_CTLS];
+
+	u8	pad;
+	__le16	subsystem_id;
+} __packed;
+
+#endif /* __AR9170_EEPROM_H */
diff --git a/drivers/net/wireless/ar9170/hw.h b/drivers/net/wireless/ar9170/hw.h
new file mode 100644
index 000000000000..13091bd9d815
--- /dev/null
+++ b/drivers/net/wireless/ar9170/hw.h
@@ -0,0 +1,417 @@
+/*
+ * Atheros AR9170 driver
+ *
+ * Hardware-specific definitions
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *    Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ *    Permission to use, copy, modify, and/or distribute this software for any
+ *    purpose with or without fee is hereby granted, provided that the above
+ *    copyright notice and this permission notice appear in all copies.
+ *
+ *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef __AR9170_HW_H
+#define __AR9170_HW_H
+
+#define AR9170_MAX_CMD_LEN	64
+
+enum ar9170_cmd {
+	AR9170_CMD_RREG		= 0x00,
+	AR9170_CMD_WREG		= 0x01,
+	AR9170_CMD_RMEM		= 0x02,
+	AR9170_CMD_WMEM		= 0x03,
+	AR9170_CMD_BITAND	= 0x04,
+	AR9170_CMD_BITOR	= 0x05,
+	AR9170_CMD_EKEY		= 0x28,
+	AR9170_CMD_DKEY		= 0x29,
+	AR9170_CMD_FREQUENCY	= 0x30,
+	AR9170_CMD_RF_INIT	= 0x31,
+	AR9170_CMD_SYNTH	= 0x32,
+	AR9170_CMD_FREQ_START	= 0x33,
+	AR9170_CMD_ECHO		= 0x80,
+	AR9170_CMD_TALLY	= 0x81,
+	AR9170_CMD_TALLY_APD	= 0x82,
+	AR9170_CMD_CONFIG	= 0x83,
+	AR9170_CMD_RESET	= 0x90,
+	AR9170_CMD_DKRESET	= 0x91,
+	AR9170_CMD_DKTX_STATUS	= 0x92,
+	AR9170_CMD_FDC		= 0xA0,
+	AR9170_CMD_WREEPROM	= 0xB0,
+	AR9170_CMD_WFLASH	= 0xB0,
+	AR9170_CMD_FLASH_ERASE	= 0xB1,
+	AR9170_CMD_FLASH_PROG	= 0xB2,
+	AR9170_CMD_FLASH_CHKSUM	= 0xB3,
+	AR9170_CMD_FLASH_READ	= 0xB4,
+	AR9170_CMD_FW_DL_INIT	= 0xB5,
+	AR9170_CMD_MEM_WREEPROM	= 0xBB,
+};
+
+/* endpoints */
+#define AR9170_EP_TX				1
+#define AR9170_EP_RX				2
+#define AR9170_EP_IRQ				3
+#define AR9170_EP_CMD				4
+
+#define AR9170_EEPROM_START			0x1600
+
+#define AR9170_GPIO_REG_BASE			0x1d0100
+#define AR9170_GPIO_REG_PORT_TYPE		AR9170_GPIO_REG_BASE
+#define AR9170_GPIO_REG_DATA			(AR9170_GPIO_REG_BASE + 4)
+#define AR9170_NUM_LEDS				2
+
+
+#define AR9170_USB_REG_BASE			0x1e1000
+#define AR9170_USB_REG_DMA_CTL			(AR9170_USB_REG_BASE + 0x108)
+#define		AR9170_DMA_CTL_ENABLE_TO_DEVICE		0x1
+#define		AR9170_DMA_CTL_ENABLE_FROM_DEVICE	0x2
+#define		AR9170_DMA_CTL_HIGH_SPEED		0x4
+#define		AR9170_DMA_CTL_PACKET_MODE		0x8
+
+#define AR9170_USB_REG_MAX_AGG_UPLOAD		(AR9170_USB_REG_BASE + 0x110)
+#define AR9170_USB_REG_UPLOAD_TIME_CTL		(AR9170_USB_REG_BASE + 0x114)
+
+
+
+#define AR9170_MAC_REG_BASE			0x1c3000
+
+#define AR9170_MAC_REG_TSF_L			(AR9170_MAC_REG_BASE + 0x514)
+#define AR9170_MAC_REG_TSF_H			(AR9170_MAC_REG_BASE + 0x518)
+
+#define AR9170_MAC_REG_ATIM_WINDOW		(AR9170_MAC_REG_BASE + 0x51C)
+#define AR9170_MAC_REG_BCN_PERIOD		(AR9170_MAC_REG_BASE + 0x520)
+#define AR9170_MAC_REG_PRETBTT			(AR9170_MAC_REG_BASE + 0x524)
+
+#define AR9170_MAC_REG_MAC_ADDR_L		(AR9170_MAC_REG_BASE + 0x610)
+#define AR9170_MAC_REG_MAC_ADDR_H		(AR9170_MAC_REG_BASE + 0x614)
+#define AR9170_MAC_REG_BSSID_L			(AR9170_MAC_REG_BASE + 0x618)
+#define AR9170_MAC_REG_BSSID_H			(AR9170_MAC_REG_BASE + 0x61c)
+
+#define AR9170_MAC_REG_GROUP_HASH_TBL_L		(AR9170_MAC_REG_BASE + 0x624)
+#define AR9170_MAC_REG_GROUP_HASH_TBL_H		(AR9170_MAC_REG_BASE + 0x628)
+
+#define AR9170_MAC_REG_RX_TIMEOUT		(AR9170_MAC_REG_BASE + 0x62C)
+
+#define AR9170_MAC_REG_BASIC_RATE		(AR9170_MAC_REG_BASE + 0x630)
+#define AR9170_MAC_REG_MANDATORY_RATE		(AR9170_MAC_REG_BASE + 0x634)
+#define AR9170_MAC_REG_RTS_CTS_RATE		(AR9170_MAC_REG_BASE + 0x638)
+#define AR9170_MAC_REG_BACKOFF_PROTECT		(AR9170_MAC_REG_BASE + 0x63c)
+#define AR9170_MAC_REG_RX_THRESHOLD		(AR9170_MAC_REG_BASE + 0x640)
+#define AR9170_MAC_REG_RX_PE_DELAY		(AR9170_MAC_REG_BASE + 0x64C)
+
+#define AR9170_MAC_REG_DYNAMIC_SIFS_ACK		(AR9170_MAC_REG_BASE + 0x658)
+#define AR9170_MAC_REG_SNIFFER			(AR9170_MAC_REG_BASE + 0x674)
+#define		AR9170_MAC_REG_SNIFFER_ENABLE_PROMISC	BIT(0)
+#define		AR9170_MAC_REG_SNIFFER_DEFAULTS		0x02000000
+#define AR9170_MAC_REG_ENCRYPTION		(AR9170_MAC_REG_BASE + 0x678)
+#define		AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE	BIT(3)
+#define		AR9170_MAC_REG_ENCRYPTION_DEFAULTS	0x70
+
+#define AR9170_MAC_REG_MISC_680			(AR9170_MAC_REG_BASE + 0x680)
+#define AR9170_MAC_REG_TX_UNDERRUN		(AR9170_MAC_REG_BASE + 0x688)
+
+#define AR9170_MAC_REG_FRAMETYPE_FILTER		(AR9170_MAC_REG_BASE + 0x68c)
+#define		AR9170_MAC_REG_FTF_ASSOC_REQ		BIT(0)
+#define		AR9170_MAC_REG_FTF_ASSOC_RESP		BIT(1)
+#define		AR9170_MAC_REG_FTF_REASSOC_REQ		BIT(2)
+#define		AR9170_MAC_REG_FTF_REASSOC_RESP		BIT(3)
+#define		AR9170_MAC_REG_FTF_PRB_REQ		BIT(4)
+#define		AR9170_MAC_REG_FTF_PRB_RESP		BIT(5)
+#define		AR9170_MAC_REG_FTF_BIT6			BIT(6)
+#define		AR9170_MAC_REG_FTF_BIT7			BIT(7)
+#define		AR9170_MAC_REG_FTF_BEACON		BIT(8)
+#define		AR9170_MAC_REG_FTF_ATIM			BIT(9)
+#define		AR9170_MAC_REG_FTF_DEASSOC		BIT(10)
+#define		AR9170_MAC_REG_FTF_AUTH			BIT(11)
+#define		AR9170_MAC_REG_FTF_DEAUTH		BIT(12)
+#define		AR9170_MAC_REG_FTF_BIT13		BIT(13)
+#define		AR9170_MAC_REG_FTF_BIT14		BIT(14)
+#define		AR9170_MAC_REG_FTF_BIT15		BIT(15)
+#define		AR9170_MAC_REG_FTF_BAR			BIT(24)
+#define		AR9170_MAC_REG_FTF_BIT25		BIT(25)
+#define		AR9170_MAC_REG_FTF_PSPOLL		BIT(26)
+#define		AR9170_MAC_REG_FTF_RTS			BIT(27)
+#define		AR9170_MAC_REG_FTF_CTS			BIT(28)
+#define		AR9170_MAC_REG_FTF_ACK			BIT(29)
+#define		AR9170_MAC_REG_FTF_CFE			BIT(30)
+#define		AR9170_MAC_REG_FTF_CFE_ACK		BIT(31)
+#define		AR9170_MAC_REG_FTF_DEFAULTS		0x0500ffff
+#define		AR9170_MAC_REG_FTF_MONITOR		0xfd00ffff
+
+#define AR9170_MAC_REG_RX_TOTAL			(AR9170_MAC_REG_BASE + 0x6A0)
+#define AR9170_MAC_REG_RX_CRC32			(AR9170_MAC_REG_BASE + 0x6A4)
+#define AR9170_MAC_REG_RX_CRC16			(AR9170_MAC_REG_BASE + 0x6A8)
+#define AR9170_MAC_REG_RX_ERR_DECRYPTION_UNI	(AR9170_MAC_REG_BASE + 0x6AC)
+#define AR9170_MAC_REG_RX_OVERRUN		(AR9170_MAC_REG_BASE + 0x6B0)
+#define AR9170_MAC_REG_RX_ERR_DECRYPTION_MUL	(AR9170_MAC_REG_BASE + 0x6BC)
+#define AR9170_MAC_REG_TX_RETRY			(AR9170_MAC_REG_BASE + 0x6CC)
+#define AR9170_MAC_REG_TX_TOTAL			(AR9170_MAC_REG_BASE + 0x6F4)
+
+
+#define AR9170_MAC_REG_ACK_EXTENSION		(AR9170_MAC_REG_BASE + 0x690)
+#define AR9170_MAC_REG_EIFS_AND_SIFS		(AR9170_MAC_REG_BASE + 0x698)
+
+#define AR9170_MAC_REG_SLOT_TIME		(AR9170_MAC_REG_BASE + 0x6F0)
+
+#define AR9170_MAC_REG_POWERMANAGEMENT		(AR9170_MAC_REG_BASE + 0x700)
+#define		AR9170_MAC_REG_POWERMGT_IBSS		0xe0
+#define		AR9170_MAC_REG_POWERMGT_AP		0xa1
+#define		AR9170_MAC_REG_POWERMGT_STA		0x2
+#define		AR9170_MAC_REG_POWERMGT_AP_WDS		0x3
+#define		AR9170_MAC_REG_POWERMGT_DEFAULTS	(0xf << 24)
+
+#define AR9170_MAC_REG_ROLL_CALL_TBL_L		(AR9170_MAC_REG_BASE + 0x704)
+#define AR9170_MAC_REG_ROLL_CALL_TBL_H		(AR9170_MAC_REG_BASE + 0x708)
+
+#define AR9170_MAC_REG_AC0_CW			(AR9170_MAC_REG_BASE + 0xB00)
+#define AR9170_MAC_REG_AC1_CW			(AR9170_MAC_REG_BASE + 0xB04)
+#define AR9170_MAC_REG_AC2_CW			(AR9170_MAC_REG_BASE + 0xB08)
+#define AR9170_MAC_REG_AC3_CW			(AR9170_MAC_REG_BASE + 0xB0C)
+#define AR9170_MAC_REG_AC4_CW			(AR9170_MAC_REG_BASE + 0xB10)
+#define AR9170_MAC_REG_AC1_AC0_AIFS		(AR9170_MAC_REG_BASE + 0xB14)
+#define AR9170_MAC_REG_AC3_AC2_AIFS		(AR9170_MAC_REG_BASE + 0xB18)
+
+#define AR9170_MAC_REG_RETRY_MAX		(AR9170_MAC_REG_BASE + 0xB28)
+
+#define AR9170_MAC_REG_FCS_SELECT		(AR9170_MAC_REG_BASE + 0xBB0)
+#define		AR9170_MAC_FCS_SWFCS		0x1
+#define		AR9170_MAC_FCS_FIFO_PROT	0x4
+
+
+#define AR9170_MAC_REG_TXOP_NOT_ENOUGH_IND	(AR9170_MAC_REG_BASE + 0xB30)
+
+#define AR9170_MAC_REG_AC1_AC0_TXOP		(AR9170_MAC_REG_BASE + 0xB44)
+#define AR9170_MAC_REG_AC3_AC2_TXOP		(AR9170_MAC_REG_BASE + 0xB48)
+
+#define AR9170_MAC_REG_ACK_TABLE		(AR9170_MAC_REG_BASE + 0xC00)
+#define AR9170_MAC_REG_AMPDU_RX_THRESH		(AR9170_MAC_REG_BASE + 0xC50)
+
+#define AR9170_MAC_REG_TXRX_MPI			(AR9170_MAC_REG_BASE + 0xD7C)
+#define		AR9170_MAC_TXRX_MPI_TX_MPI_MASK	0x0000000f
+#define		AR9170_MAC_TXRX_MPI_TX_TO_MASK	0x0000fff0
+#define		AR9170_MAC_TXRX_MPI_RX_MPI_MASK	0x000f0000
+#define		AR9170_MAC_TXRX_MPI_RX_TO_MASK	0xfff00000
+
+#define AR9170_MAC_REG_BCN_ADDR			(AR9170_MAC_REG_BASE + 0xD84)
+#define AR9170_MAC_REG_BCN_LENGTH		(AR9170_MAC_REG_BASE + 0xD88)
+#define AR9170_MAC_REG_BCN_PLCP			(AR9170_MAC_REG_BASE + 0xD90)
+#define AR9170_MAC_REG_BCN_CTRL			(AR9170_MAC_REG_BASE + 0xD94)
+#define AR9170_MAC_REG_BCN_HT1			(AR9170_MAC_REG_BASE + 0xDA0)
+#define AR9170_MAC_REG_BCN_HT2			(AR9170_MAC_REG_BASE + 0xDA4)
+
+
+#define AR9170_PWR_REG_BASE			0x1D4000
+
+#define AR9170_PWR_REG_CLOCK_SEL		(AR9170_PWR_REG_BASE + 0x008)
+#define		AR9170_PWR_CLK_AHB_40MHZ	0
+#define		AR9170_PWR_CLK_AHB_20_22MHZ	1
+#define		AR9170_PWR_CLK_AHB_40_44MHZ	2
+#define		AR9170_PWR_CLK_AHB_80_88MHZ	3
+#define		AR9170_PWR_CLK_DAC_160_INV_DLY	0x70
+
+
+/* put beacon here in memory */
+#define AR9170_BEACON_BUFFER_ADDRESS		0x117900
+
+
+struct ar9170_tx_control {
+	__le16 length;
+	__le16 mac_control;
+	__le32 phy_control;
+	u8 frame_data[0];
+} __packed;
+
+/* these are either-or */
+#define AR9170_TX_MAC_PROT_RTS			0x0001
+#define AR9170_TX_MAC_PROT_CTS			0x0002
+
+#define AR9170_TX_MAC_NO_ACK			0x0004
+/* if unset, MAC will only do SIFS space before frame */
+#define AR9170_TX_MAC_BACKOFF			0x0008
+#define AR9170_TX_MAC_BURST			0x0010
+#define AR9170_TX_MAC_AGGR			0x0020
+
+/* encryption is a two-bit field */
+#define AR9170_TX_MAC_ENCR_NONE			0x0000
+#define AR9170_TX_MAC_ENCR_RC4			0x0040
+#define AR9170_TX_MAC_ENCR_CENC			0x0080
+#define AR9170_TX_MAC_ENCR_AES			0x00c0
+
+#define AR9170_TX_MAC_MMIC			0x0100
+#define AR9170_TX_MAC_HW_DURATION		0x0200
+#define AR9170_TX_MAC_QOS_SHIFT			10
+#define AR9170_TX_MAC_QOS_MASK			(3 << AR9170_TX_MAC_QOS_SHIFT)
+#define AR9170_TX_MAC_AGGR_QOS_BIT1		0x0400
+#define AR9170_TX_MAC_AGGR_QOS_BIT2		0x0800
+#define AR9170_TX_MAC_DISABLE_TXOP		0x1000
+#define AR9170_TX_MAC_TXOP_RIFS			0x2000
+#define AR9170_TX_MAC_IMM_AMPDU			0x4000
+#define AR9170_TX_MAC_RATE_PROBE		0x8000
+
+/* either-or */
+#define AR9170_TX_PHY_MOD_CCK			0x00000000
+#define AR9170_TX_PHY_MOD_OFDM			0x00000001
+#define AR9170_TX_PHY_MOD_HT			0x00000002
+
+/* depends on modulation */
+#define AR9170_TX_PHY_SHORT_PREAMBLE		0x00000004
+#define AR9170_TX_PHY_GREENFIELD		0x00000004
+
+#define AR9170_TX_PHY_BW_SHIFT			3
+#define AR9170_TX_PHY_BW_MASK			(3 << AR9170_TX_PHY_BW_SHIFT)
+#define AR9170_TX_PHY_BW_20MHZ			0
+#define AR9170_TX_PHY_BW_40MHZ			2
+#define AR9170_TX_PHY_BW_40MHZ_DUP		3
+
+#define AR9170_TX_PHY_TX_HEAVY_CLIP_SHIFT	6
+#define AR9170_TX_PHY_TX_HEAVY_CLIP_MASK	(7 << AR9170_TX_PHY_TX_HEAVY_CLIP_SHIFT)
+
+#define AR9170_TX_PHY_TX_PWR_SHIFT		9
+#define AR9170_TX_PHY_TX_PWR_MASK		(0x3f << AR9170_TX_PHY_TX_PWR_SHIFT)
+
+/* not part of the hw-spec */
+#define AR9170_TX_PHY_QOS_SHIFT			25
+#define AR9170_TX_PHY_QOS_MASK			(3 << AR9170_TX_PHY_QOS_SHIFT)
+
+#define AR9170_TX_PHY_TXCHAIN_SHIFT		15
+#define AR9170_TX_PHY_TXCHAIN_MASK		(7 << AR9170_TX_PHY_TXCHAIN_SHIFT)
+#define AR9170_TX_PHY_TXCHAIN_1			1
+/* use for cck, ofdm 6/9/12/18/24 and HT if capable */
+#define AR9170_TX_PHY_TXCHAIN_2			5
+
+#define AR9170_TX_PHY_MCS_SHIFT			18
+#define AR9170_TX_PHY_MCS_MASK			(0x7f << AR9170_TX_PHY_MCS_SHIFT)
+
+#define AR9170_TX_PHY_SHORT_GI			0x80000000
+
+struct ar9170_rx_head {
+	u8 plcp[12];
+};
+
+struct ar9170_rx_tail {
+	union {
+		struct {
+			u8 rssi_ant0, rssi_ant1, rssi_ant2,
+			   rssi_ant0x, rssi_ant1x, rssi_ant2x,
+			   rssi_combined;
+		};
+		u8 rssi[7];
+	};
+
+	u8 evm_stream0[6], evm_stream1[6];
+	u8 phy_err;
+	u8 SAidx, DAidx;
+	u8 error;
+	u8 status;
+};
+
+#define AR9170_ENC_ALG_NONE			0x0
+#define AR9170_ENC_ALG_WEP64			0x1
+#define AR9170_ENC_ALG_TKIP			0x2
+#define AR9170_ENC_ALG_AESCCMP			0x4
+#define AR9170_ENC_ALG_WEP128			0x5
+#define AR9170_ENC_ALG_WEP256			0x6
+#define AR9170_ENC_ALG_CENC			0x7
+
+#define AR9170_RX_ENC_SOFTWARE			0x8
+
+static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_tail *t)
+{
+	return (t->SAidx & 0xc0) >> 4 |
+	       (t->DAidx & 0xc0) >> 6;
+}
+
+#define AR9170_RX_STATUS_MODULATION_MASK	0x03
+#define AR9170_RX_STATUS_MODULATION_CCK		0x00
+#define AR9170_RX_STATUS_MODULATION_OFDM	0x01
+#define AR9170_RX_STATUS_MODULATION_HT		0x02
+#define AR9170_RX_STATUS_MODULATION_DUPOFDM	0x03
+
+/* depends on modulation */
+#define AR9170_RX_STATUS_SHORT_PREAMBLE		0x08
+#define AR9170_RX_STATUS_GREENFIELD		0x08
+
+#define AR9170_RX_STATUS_MPDU_MASK		0x30
+#define AR9170_RX_STATUS_MPDU_SINGLE		0x00
+#define AR9170_RX_STATUS_MPDU_FIRST		0x10
+#define AR9170_RX_STATUS_MPDU_MIDDLE		0x20
+#define AR9170_RX_STATUS_MPDU_LAST		0x30
+
+
+#define AR9170_RX_ERROR_RXTO			0x01
+#define AR9170_RX_ERROR_OVERRUN			0x02
+#define AR9170_RX_ERROR_DECRYPT			0x04
+#define AR9170_RX_ERROR_FCS			0x08
+#define AR9170_RX_ERROR_WRONG_RA		0x10
+#define AR9170_RX_ERROR_PLCP			0x20
+#define AR9170_RX_ERROR_MMIC			0x40
+
+struct ar9170_cmd_tx_status {
+	__le16 unkn;
+	u8 dst[ETH_ALEN];
+	__le32 rate;
+	__le16 status;
+} __packed;
+
+#define AR9170_TX_STATUS_COMPLETE		0x00
+#define AR9170_TX_STATUS_RETRY			0x01
+#define AR9170_TX_STATUS_FAILED			0x02
+
+struct ar9170_cmd_ba_failed_count {
+	__le16 failed;
+	__le16 rate;
+} __packed;
+
+struct ar9170_cmd_response {
+	u8 flag;
+	u8 type;
+
+	union {
+		struct ar9170_cmd_tx_status		tx_status;
+		struct ar9170_cmd_ba_failed_count	ba_fail_cnt;
+		u8 data[0];
+	};
+} __packed;
+
+/* QoS */
+
+/* mac80211 queue to HW/FW map */
+static const u8 ar9170_qos_hwmap[4] = { 3, 2, 0, 1 };
+
+/* HW/FW queue to mac80211 map */
+static const u8 ar9170_qos_mac80211map[4] = { 2, 3, 1, 0 };
+
+enum ar9170_txq {
+	AR9170_TXQ_BE,
+	AR9170_TXQ_BK,
+	AR9170_TXQ_VI,
+	AR9170_TXQ_VO,
+
+	__AR9170_NUM_TXQ,
+};
+
+#endif /* __AR9170_HW_H */
diff --git a/drivers/net/wireless/ar9170/led.c b/drivers/net/wireless/ar9170/led.c
new file mode 100644
index 000000000000..341cead7f606
--- /dev/null
+++ b/drivers/net/wireless/ar9170/led.c
@@ -0,0 +1,171 @@
+/*
+ * Atheros AR9170 driver
+ *
+ * LED handling
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *    Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ *    Permission to use, copy, modify, and/or distribute this software for any
+ *    purpose with or without fee is hereby granted, provided that the above
+ *    copyright notice and this permission notice appear in all copies.
+ *
+ *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ar9170.h"
+#include "cmd.h"
+
+int ar9170_set_leds_state(struct ar9170 *ar, u32 led_state)
+{
+	return ar9170_write_reg(ar, AR9170_GPIO_REG_DATA, led_state);
+}
+
+int ar9170_init_leds(struct ar9170 *ar)
+{
+	int err;
+
+	/* disable LEDs */
+	/* GPIO [0/1 mode: output, 2/3: input] */
+	err = ar9170_write_reg(ar, AR9170_GPIO_REG_PORT_TYPE, 3);
+	if (err)
+		goto out;
+
+	/* GPIO 0/1 value: off */
+	err = ar9170_set_leds_state(ar, 0);
+
+out:
+	return err;
+}
+
+#ifdef CONFIG_AR9170_LEDS
+static void ar9170_update_leds(struct work_struct *work)
+{
+	struct ar9170 *ar = container_of(work, struct ar9170, led_work.work);
+	int i, tmp, blink_delay = 1000;
+	u32 led_val = 0;
+	bool rerun = false;
+
+	if (unlikely(!IS_ACCEPTING_CMD(ar)))
+		return ;
+
+	mutex_lock(&ar->mutex);
+	for (i = 0; i < AR9170_NUM_LEDS; i++)
+		if (ar->leds[i].toggled) {
+			led_val |= 1 << i;
+
+			tmp = 70 + 200 / (ar->leds[i].toggled);
+			if (tmp < blink_delay)
+				blink_delay = tmp;
+
+			if (ar->leds[i].toggled > 1)
+				ar->leds[i].toggled = 0;
+
+			rerun = true;
+		}
+
+	ar9170_set_leds_state(ar, led_val);
+	mutex_unlock(&ar->mutex);
+
+	if (rerun)
+		queue_delayed_work(ar->hw->workqueue, &ar->led_work,
+				   msecs_to_jiffies(blink_delay));
+}
+
+static void ar9170_led_brightness_set(struct led_classdev *led,
+				      enum led_brightness brightness)
+{
+	struct ar9170_led *arl = container_of(led, struct ar9170_led, l);
+	struct ar9170 *ar = arl->ar;
+
+	arl->toggled++;
+
+	if (likely(IS_ACCEPTING_CMD(ar) && brightness))
+		queue_delayed_work(ar->hw->workqueue, &ar->led_work, HZ/10);
+}
+
+static int ar9170_register_led(struct ar9170 *ar, int i, char *name,
+			       char *trigger)
+{
+	int err;
+
+	snprintf(ar->leds[i].name, sizeof(ar->leds[i].name),
+		 "ar9170-%s::%s", wiphy_name(ar->hw->wiphy), name);
+
+	ar->leds[i].ar = ar;
+	ar->leds[i].l.name = ar->leds[i].name;
+	ar->leds[i].l.brightness_set = ar9170_led_brightness_set;
+	ar->leds[i].l.brightness = 0;
+	ar->leds[i].l.default_trigger = trigger;
+
+	err = led_classdev_register(wiphy_dev(ar->hw->wiphy),
+				    &ar->leds[i].l);
+	if (err)
+		printk(KERN_ERR "%s: failed to register %s LED (%d).\n",
+		       wiphy_name(ar->hw->wiphy), ar->leds[i].name, err);
+	else
+		ar->leds[i].registered = true;
+
+	return err;
+}
+
+void ar9170_unregister_leds(struct ar9170 *ar)
+{
+	int i;
+
+	cancel_delayed_work_sync(&ar->led_work);
+
+	for (i = 0; i < AR9170_NUM_LEDS; i++)
+		if (ar->leds[i].registered) {
+			led_classdev_unregister(&ar->leds[i].l);
+			ar->leds[i].registered = false;
+		}
+}
+
+int ar9170_register_leds(struct ar9170 *ar)
+{
+	int err;
+
+	INIT_DELAYED_WORK(&ar->led_work, ar9170_update_leds);
+
+	err = ar9170_register_led(ar, 0, "tx",
+				  ieee80211_get_tx_led_name(ar->hw));
+	if (err)
+		goto fail;
+
+	err = ar9170_register_led(ar, 1, "assoc",
+				 ieee80211_get_assoc_led_name(ar->hw));
+	if (err)
+		goto fail;
+
+	return 0;
+
+fail:
+	ar9170_unregister_leds(ar);
+	return err;
+}
+
+#endif /* CONFIG_AR9170_LEDS */
diff --git a/drivers/net/wireless/ar9170/mac.c b/drivers/net/wireless/ar9170/mac.c
new file mode 100644
index 000000000000..c8fa3073169f
--- /dev/null
+++ b/drivers/net/wireless/ar9170/mac.c
@@ -0,0 +1,452 @@
+/*
+ * Atheros AR9170 driver
+ *
+ * MAC programming
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *    Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ *    Permission to use, copy, modify, and/or distribute this software for any
+ *    purpose with or without fee is hereby granted, provided that the above
+ *    copyright notice and this permission notice appear in all copies.
+ *
+ *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include "ar9170.h"
+#include "cmd.h"
+
+int ar9170_set_qos(struct ar9170 *ar)
+{
+	ar9170_regwrite_begin(ar);
+
+	ar9170_regwrite(AR9170_MAC_REG_AC0_CW, ar->edcf[0].cw_min |
+			(ar->edcf[0].cw_max << 16));
+	ar9170_regwrite(AR9170_MAC_REG_AC1_CW, ar->edcf[1].cw_min |
+			(ar->edcf[1].cw_max << 16));
+	ar9170_regwrite(AR9170_MAC_REG_AC2_CW, ar->edcf[2].cw_min |
+			(ar->edcf[2].cw_max << 16));
+	ar9170_regwrite(AR9170_MAC_REG_AC3_CW, ar->edcf[3].cw_min |
+			(ar->edcf[3].cw_max << 16));
+	ar9170_regwrite(AR9170_MAC_REG_AC4_CW, ar->edcf[4].cw_min |
+			(ar->edcf[4].cw_max << 16));
+
+	ar9170_regwrite(AR9170_MAC_REG_AC1_AC0_AIFS,
+			((ar->edcf[0].aifs * 9 + 10)) |
+			((ar->edcf[1].aifs * 9 + 10) << 12) |
+			((ar->edcf[2].aifs * 9 + 10) << 24));
+	ar9170_regwrite(AR9170_MAC_REG_AC3_AC2_AIFS,
+			((ar->edcf[2].aifs * 9 + 10) >> 8) |
+			((ar->edcf[3].aifs * 9 + 10) << 4) |
+			((ar->edcf[4].aifs * 9 + 10) << 16));
+
+	ar9170_regwrite(AR9170_MAC_REG_AC1_AC0_TXOP,
+			ar->edcf[0].txop | ar->edcf[1].txop << 16);
+	ar9170_regwrite(AR9170_MAC_REG_AC3_AC2_TXOP,
+			ar->edcf[1].txop | ar->edcf[3].txop << 16);
+
+	ar9170_regwrite_finish();
+
+	return ar9170_regwrite_result();
+}
+
+int ar9170_init_mac(struct ar9170 *ar)
+{
+	ar9170_regwrite_begin(ar);
+
+	ar9170_regwrite(AR9170_MAC_REG_ACK_EXTENSION, 0x40);
+
+	ar9170_regwrite(AR9170_MAC_REG_RETRY_MAX, 0);
+
+	/* enable MMIC */
+	ar9170_regwrite(AR9170_MAC_REG_SNIFFER,
+			AR9170_MAC_REG_SNIFFER_DEFAULTS);
+
+	ar9170_regwrite(AR9170_MAC_REG_RX_THRESHOLD, 0xc1f80);
+
+	ar9170_regwrite(AR9170_MAC_REG_RX_PE_DELAY, 0x70);
+	ar9170_regwrite(AR9170_MAC_REG_EIFS_AND_SIFS, 0xa144000);
+	ar9170_regwrite(AR9170_MAC_REG_SLOT_TIME, 9 << 10);
+
+	/* CF-END mode */
+	ar9170_regwrite(0x1c3b2c, 0x19000000);
+
+	/* NAV protects ACK only (in TXOP) */
+	ar9170_regwrite(0x1c3b38, 0x201);
+
+	/* Set Beacon PHY CTRL's TPC to 0x7, TA1=1 */
+	/* OTUS set AM to 0x1 */
+	ar9170_regwrite(AR9170_MAC_REG_BCN_HT1, 0x8000170);
+
+	ar9170_regwrite(AR9170_MAC_REG_BACKOFF_PROTECT, 0x105);
+
+	/* AGG test code*/
+	/* Aggregation MAX number and timeout */
+	ar9170_regwrite(0x1c3b9c, 0x10000a);
+
+	ar9170_regwrite(AR9170_MAC_REG_FRAMETYPE_FILTER,
+			AR9170_MAC_REG_FTF_DEFAULTS);
+
+	/* Enable deaggregator, response in sniffer mode */
+	ar9170_regwrite(0x1c3c40, 0x1 | 1<<30);
+
+	/* rate sets */
+	ar9170_regwrite(AR9170_MAC_REG_BASIC_RATE, 0x150f);
+	ar9170_regwrite(AR9170_MAC_REG_MANDATORY_RATE, 0x150f);
+	ar9170_regwrite(AR9170_MAC_REG_RTS_CTS_RATE, 0x10b01bb);
+
+	/* MIMO response control */
+	ar9170_regwrite(0x1c3694, 0x4003C1E);/* bit 26~28  otus-AM */
+
+	/* switch MAC to OTUS interface */
+	ar9170_regwrite(0x1c3600, 0x3);
+
+	ar9170_regwrite(AR9170_MAC_REG_AMPDU_RX_THRESH, 0xffff);
+
+	/* set PHY register read timeout (??) */
+	ar9170_regwrite(AR9170_MAC_REG_MISC_680, 0xf00008);
+
+	/* Disable Rx TimeOut, workaround for BB. */
+	ar9170_regwrite(AR9170_MAC_REG_RX_TIMEOUT, 0x0);
+
+	/* Set CPU clock frequency to 88/80MHz */
+	ar9170_regwrite(AR9170_PWR_REG_CLOCK_SEL,
+			AR9170_PWR_CLK_AHB_80_88MHZ |
+			AR9170_PWR_CLK_DAC_160_INV_DLY);
+
+	/* Set WLAN DMA interrupt mode: generate int per packet */
+	ar9170_regwrite(AR9170_MAC_REG_TXRX_MPI, 0x110011);
+
+	ar9170_regwrite(AR9170_MAC_REG_FCS_SELECT,
+			AR9170_MAC_FCS_FIFO_PROT);
+
+	/* Disables the CF_END frame, undocumented register */
+	ar9170_regwrite(AR9170_MAC_REG_TXOP_NOT_ENOUGH_IND,
+			0x141E0F48);
+
+	ar9170_regwrite_finish();
+
+	return ar9170_regwrite_result();
+}
+
+static int ar9170_set_mac_reg(struct ar9170 *ar, const u32 reg, const u8 *mac)
+{
+	static const u8 zero[ETH_ALEN] = { 0 };
+
+	if (!mac)
+		mac = zero;
+
+	ar9170_regwrite_begin(ar);
+
+	ar9170_regwrite(reg,
+			(mac[3] << 24) | (mac[2] << 16) |
+			(mac[1] << 8) | mac[0]);
+
+	ar9170_regwrite(reg + 4, (mac[5] << 8) | mac[4]);
+
+	ar9170_regwrite_finish();
+
+	return ar9170_regwrite_result();
+}
+
+int ar9170_update_multicast(struct ar9170 *ar)
+{
+	int err;
+
+	ar9170_regwrite_begin(ar);
+	ar9170_regwrite(AR9170_MAC_REG_GROUP_HASH_TBL_H,
+		ar->want_mc_hash >> 32);
+	ar9170_regwrite(AR9170_MAC_REG_GROUP_HASH_TBL_L,
+		ar->want_mc_hash);
+
+	ar9170_regwrite_finish();
+	err = ar9170_regwrite_result();
+
+	if (err)
+		return err;
+
+	ar->cur_mc_hash = ar->want_mc_hash;
+
+	return 0;
+}
+
+int ar9170_update_frame_filter(struct ar9170 *ar)
+{
+	int err;
+
+	err = ar9170_write_reg(ar, AR9170_MAC_REG_FRAMETYPE_FILTER,
+			       ar->want_filter);
+
+	if (err)
+		return err;
+
+	ar->cur_filter = ar->want_filter;
+
+	return 0;
+}
+
+static int ar9170_set_promiscouous(struct ar9170 *ar)
+{
+	u32 encr_mode, sniffer;
+	int err;
+
+	err = ar9170_read_reg(ar, AR9170_MAC_REG_SNIFFER, &sniffer);
+	if (err)
+		return err;
+
+	err = ar9170_read_reg(ar, AR9170_MAC_REG_ENCRYPTION, &encr_mode);
+	if (err)
+		return err;
+
+	if (ar->sniffer_enabled) {
+		sniffer |= AR9170_MAC_REG_SNIFFER_ENABLE_PROMISC;
+
+		/*
+		 * Rx decryption works in place.
+		 *
+		 * If we don't disable it, the hardware will render all
+		 * encrypted frames which are encrypted with an unknown
+		 * key useless.
+		 */
+
+		encr_mode |= AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE;
+		ar->sniffer_enabled = true;
+	} else {
+		sniffer &= ~AR9170_MAC_REG_SNIFFER_ENABLE_PROMISC;
+
+		if (ar->rx_software_decryption)
+			encr_mode |= AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE;
+		else
+			encr_mode &= ~AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE;
+	}
+
+	ar9170_regwrite_begin(ar);
+	ar9170_regwrite(AR9170_MAC_REG_ENCRYPTION, encr_mode);
+	ar9170_regwrite(AR9170_MAC_REG_SNIFFER, sniffer);
+	ar9170_regwrite_finish();
+
+	return ar9170_regwrite_result();
+}
+
+int ar9170_set_operating_mode(struct ar9170 *ar)
+{
+	u32 pm_mode = AR9170_MAC_REG_POWERMGT_DEFAULTS;
+	u8 *mac_addr, *bssid;
+	int err;
+
+	if (ar->vif) {
+		mac_addr = ar->mac_addr;
+		bssid = ar->bssid;
+
+		switch (ar->vif->type) {
+		case NL80211_IFTYPE_MESH_POINT:
+		case NL80211_IFTYPE_ADHOC:
+			pm_mode |= AR9170_MAC_REG_POWERMGT_IBSS;
+			break;
+/*		case NL80211_IFTYPE_AP:
+			pm_mode |= AR9170_MAC_REG_POWERMGT_AP;
+			break;*/
+		case NL80211_IFTYPE_WDS:
+			pm_mode |= AR9170_MAC_REG_POWERMGT_AP_WDS;
+			break;
+		case NL80211_IFTYPE_MONITOR:
+			ar->sniffer_enabled = true;
+			ar->rx_software_decryption = true;
+			break;
+		default:
+			pm_mode |= AR9170_MAC_REG_POWERMGT_STA;
+			break;
+		}
+	} else {
+		mac_addr = NULL;
+		bssid = NULL;
+	}
+
+	err = ar9170_set_mac_reg(ar, AR9170_MAC_REG_MAC_ADDR_L, mac_addr);
+	if (err)
+		return err;
+
+	err = ar9170_set_mac_reg(ar, AR9170_MAC_REG_BSSID_L, bssid);
+	if (err)
+		return err;
+
+	err = ar9170_set_promiscouous(ar);
+	if (err)
+		return err;
+
+	ar9170_regwrite_begin(ar);
+
+	ar9170_regwrite(AR9170_MAC_REG_POWERMANAGEMENT, pm_mode);
+	ar9170_regwrite_finish();
+
+	return ar9170_regwrite_result();
+}
+
+int ar9170_set_hwretry_limit(struct ar9170 *ar, unsigned int max_retry)
+{
+	u32 tmp = min_t(u32, 0x33333, max_retry * 0x11111);
+
+	return ar9170_write_reg(ar, AR9170_MAC_REG_RETRY_MAX, tmp);
+}
+
+int ar9170_set_beacon_timers(struct ar9170 *ar)
+{
+	u32 v = 0;
+	u32 pretbtt = 0;
+
+	v |= ar->hw->conf.beacon_int;
+
+	if (ar->vif) {
+		switch (ar->vif->type) {
+		case NL80211_IFTYPE_MESH_POINT:
+		case NL80211_IFTYPE_ADHOC:
+			v |= BIT(25);
+			break;
+		case NL80211_IFTYPE_AP:
+			v |= BIT(24);
+			pretbtt = (ar->hw->conf.beacon_int - 6) << 16;
+			break;
+		default:
+			break;
+		}
+
+		v |= ar->vif->bss_conf.dtim_period << 16;
+	}
+
+	ar9170_regwrite_begin(ar);
+
+	ar9170_regwrite(AR9170_MAC_REG_PRETBTT, pretbtt);
+	ar9170_regwrite(AR9170_MAC_REG_BCN_PERIOD, v);
+	ar9170_regwrite_finish();
+	return ar9170_regwrite_result();
+}
+
+int ar9170_update_beacon(struct ar9170 *ar)
+{
+	struct sk_buff *skb;
+	__le32 *data, *old = NULL;
+	u32 word;
+	int i;
+
+	skb = ieee80211_beacon_get(ar->hw, ar->vif);
+	if (!skb)
+		return -ENOMEM;
+
+	data = (__le32 *)skb->data;
+	if (ar->beacon)
+		old = (__le32 *)ar->beacon->data;
+
+	ar9170_regwrite_begin(ar);
+	for (i = 0; i < DIV_ROUND_UP(skb->len, 4); i++) {
+		/*
+		 * XXX: This accesses beyond skb data for up
+		 *	to the last 3 bytes!!
+		 */
+
+		if (old && (data[i] == old[i]))
+			continue;
+
+		word = le32_to_cpu(data[i]);
+		ar9170_regwrite(AR9170_BEACON_BUFFER_ADDRESS + 4 * i, word);
+	}
+
+	/* XXX: use skb->cb info */
+	if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ)
+		ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
+				((skb->len + 4) << (3+16)) + 0x0400);
+	else
+		ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
+				((skb->len + 4) << (3+16)) + 0x0400);
+
+	ar9170_regwrite(AR9170_MAC_REG_BCN_LENGTH, skb->len + 4);
+	ar9170_regwrite(AR9170_MAC_REG_BCN_ADDR, AR9170_BEACON_BUFFER_ADDRESS);
+	ar9170_regwrite(AR9170_MAC_REG_BCN_CTRL, 1);
+
+	ar9170_regwrite_finish();
+
+	dev_kfree_skb(ar->beacon);
+	ar->beacon = skb;
+
+	return ar9170_regwrite_result();
+}
+
+void ar9170_new_beacon(struct work_struct *work)
+{
+	struct ar9170 *ar = container_of(work, struct ar9170,
+					 beacon_work);
+	struct sk_buff *skb;
+
+	if (unlikely(!IS_STARTED(ar)))
+		return ;
+
+	mutex_lock(&ar->mutex);
+
+	if (!ar->vif)
+		goto out;
+
+	ar9170_update_beacon(ar);
+
+	rcu_read_lock();
+	while ((skb = ieee80211_get_buffered_bc(ar->hw, ar->vif)))
+		ar9170_op_tx(ar->hw, skb);
+
+	rcu_read_unlock();
+
+ out:
+	mutex_unlock(&ar->mutex);
+}
+
+int ar9170_upload_key(struct ar9170 *ar, u8 id, const u8 *mac, u8 ktype,
+		      u8 keyidx, u8 *keydata, int keylen)
+{
+	__le32 vals[7];
+	static const u8 bcast[ETH_ALEN] =
+		{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+	u8 dummy;
+
+	mac = mac ? : bcast;
+
+	vals[0] = cpu_to_le32((keyidx << 16) + id);
+	vals[1] = cpu_to_le32(mac[1] << 24 | mac[0] << 16 | ktype);
+	vals[2] = cpu_to_le32(mac[5] << 24 | mac[4] << 16 |
+			      mac[3] << 8 | mac[2]);
+	memset(&vals[3], 0, 16);
+	if (keydata)
+		memcpy(&vals[3], keydata, keylen);
+
+	return ar->exec_cmd(ar, AR9170_CMD_EKEY,
+			    sizeof(vals), (u8 *)vals,
+			    1, &dummy);
+}
+
+int ar9170_disable_key(struct ar9170 *ar, u8 id)
+{
+	__le32 val = cpu_to_le32(id);
+	u8 dummy;
+
+	return ar->exec_cmd(ar, AR9170_CMD_EKEY,
+			    sizeof(val), (u8 *)&val,
+			    1, &dummy);
+}
diff --git a/drivers/net/wireless/ar9170/main.c b/drivers/net/wireless/ar9170/main.c
new file mode 100644
index 000000000000..5996ff9f7f47
--- /dev/null
+++ b/drivers/net/wireless/ar9170/main.c
@@ -0,0 +1,1671 @@
+/*
+ * Atheros AR9170 driver
+ *
+ * mac80211 interaction code
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2009, Christian Lamparter <chunkeey@web.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *    Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ *    Permission to use, copy, modify, and/or distribute this software for any
+ *    purpose with or without fee is hereby granted, provided that the above
+ *    copyright notice and this permission notice appear in all copies.
+ *
+ *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <net/mac80211.h>
+#include "ar9170.h"
+#include "hw.h"
+#include "cmd.h"
+
+static int modparam_nohwcrypt;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+#define RATE(_bitrate, _hw_rate, _txpidx, _flags) {	\
+	.bitrate	= (_bitrate),			\
+	.flags		= (_flags),			\
+	.hw_value	= (_hw_rate) | (_txpidx) << 4,	\
+}
+
+static struct ieee80211_rate __ar9170_ratetable[] = {
+	RATE(10, 0, 0, 0),
+	RATE(20, 1, 1, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(55, 2, 2, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(110, 3, 3, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(60, 0xb, 0, 0),
+	RATE(90, 0xf, 0, 0),
+	RATE(120, 0xa, 0, 0),
+	RATE(180, 0xe, 0, 0),
+	RATE(240, 0x9, 0, 0),
+	RATE(360, 0xd, 1, 0),
+	RATE(480, 0x8, 2, 0),
+	RATE(540, 0xc, 3, 0),
+};
+#undef RATE
+
+#define ar9170_g_ratetable	(__ar9170_ratetable + 0)
+#define ar9170_g_ratetable_size	12
+#define ar9170_a_ratetable	(__ar9170_ratetable + 4)
+#define ar9170_a_ratetable_size	8
+
+/*
+ * NB: The hw_value is used as an index into the ar9170_phy_freq_params
+ *     array in phy.c so that we don't have to do frequency lookups!
+ */
+#define CHAN(_freq, _idx) {		\
+	.center_freq	= (_freq),	\
+	.hw_value	= (_idx),	\
+	.max_power	= 18, /* XXX */	\
+}
+
+static struct ieee80211_channel ar9170_2ghz_chantable[] = {
+	CHAN(2412,  0),
+	CHAN(2417,  1),
+	CHAN(2422,  2),
+	CHAN(2427,  3),
+	CHAN(2432,  4),
+	CHAN(2437,  5),
+	CHAN(2442,  6),
+	CHAN(2447,  7),
+	CHAN(2452,  8),
+	CHAN(2457,  9),
+	CHAN(2462, 10),
+	CHAN(2467, 11),
+	CHAN(2472, 12),
+	CHAN(2484, 13),
+};
+
+static struct ieee80211_channel ar9170_5ghz_chantable[] = {
+	CHAN(4920, 14),
+	CHAN(4940, 15),
+	CHAN(4960, 16),
+	CHAN(4980, 17),
+	CHAN(5040, 18),
+	CHAN(5060, 19),
+	CHAN(5080, 20),
+	CHAN(5180, 21),
+	CHAN(5200, 22),
+	CHAN(5220, 23),
+	CHAN(5240, 24),
+	CHAN(5260, 25),
+	CHAN(5280, 26),
+	CHAN(5300, 27),
+	CHAN(5320, 28),
+	CHAN(5500, 29),
+	CHAN(5520, 30),
+	CHAN(5540, 31),
+	CHAN(5560, 32),
+	CHAN(5580, 33),
+	CHAN(5600, 34),
+	CHAN(5620, 35),
+	CHAN(5640, 36),
+	CHAN(5660, 37),
+	CHAN(5680, 38),
+	CHAN(5700, 39),
+	CHAN(5745, 40),
+	CHAN(5765, 41),
+	CHAN(5785, 42),
+	CHAN(5805, 43),
+	CHAN(5825, 44),
+	CHAN(5170, 45),
+	CHAN(5190, 46),
+	CHAN(5210, 47),
+	CHAN(5230, 48),
+};
+#undef CHAN
+
+static struct ieee80211_supported_band ar9170_band_2GHz = {
+	.channels	= ar9170_2ghz_chantable,
+	.n_channels	= ARRAY_SIZE(ar9170_2ghz_chantable),
+	.bitrates	= ar9170_g_ratetable,
+	.n_bitrates	= ar9170_g_ratetable_size,
+};
+
+#ifdef AR9170_QUEUE_DEBUG
+/*
+ * In case some wants works with AR9170's crazy tx_status queueing techniques.
+ * He might need this rather useful probing function.
+ *
+ * NOTE: caller must hold the queue's spinlock!
+ */
+
+static void ar9170_print_txheader(struct ar9170 *ar, struct sk_buff *skb)
+{
+	struct ar9170_tx_control *txc = (void *) skb->data;
+	struct ieee80211_hdr *hdr = (void *)txc->frame_data;
+
+	printk(KERN_DEBUG "%s: => FRAME [skb:%p, queue:%d, DA:[%pM] "
+			  "mac_control:%04x, phy_control:%08x]\n",
+	       wiphy_name(ar->hw->wiphy), skb, skb_get_queue_mapping(skb),
+	       ieee80211_get_DA(hdr), le16_to_cpu(txc->mac_control),
+	       le32_to_cpu(txc->phy_control));
+}
+
+static void ar9170_dump_station_tx_status_queue(struct ar9170 *ar,
+						struct sk_buff_head *queue)
+{
+	struct sk_buff *skb;
+	int i = 0;
+
+	printk(KERN_DEBUG "---[ cut here ]---\n");
+	printk(KERN_DEBUG "%s: %d entries in tx_status queue.\n",
+	       wiphy_name(ar->hw->wiphy), skb_queue_len(queue));
+
+	skb_queue_walk(queue, skb) {
+		struct ar9170_tx_control *txc = (void *) skb->data;
+		struct ieee80211_hdr *hdr = (void *)txc->frame_data;
+
+		printk(KERN_DEBUG "index:%d => \n", i);
+		ar9170_print_txheader(ar, skb);
+	}
+	printk(KERN_DEBUG "---[ end ]---\n");
+}
+#endif /* AR9170_QUEUE_DEBUG */
+
+static struct ieee80211_supported_band ar9170_band_5GHz = {
+	.channels	= ar9170_5ghz_chantable,
+	.n_channels	= ARRAY_SIZE(ar9170_5ghz_chantable),
+	.bitrates	= ar9170_a_ratetable,
+	.n_bitrates	= ar9170_a_ratetable_size,
+};
+
+void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb,
+			     bool valid_status, u16 tx_status)
+{
+	struct ieee80211_tx_info *txinfo;
+	unsigned int retries = 0, queue = skb_get_queue_mapping(skb);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ar->tx_stats_lock, flags);
+	ar->tx_stats[queue].len--;
+	if (ieee80211_queue_stopped(ar->hw, queue))
+		ieee80211_wake_queue(ar->hw, queue);
+	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
+
+	txinfo = IEEE80211_SKB_CB(skb);
+	ieee80211_tx_info_clear_status(txinfo);
+
+	switch (tx_status) {
+	case AR9170_TX_STATUS_RETRY:
+		retries = 2;
+	case AR9170_TX_STATUS_COMPLETE:
+		txinfo->flags |= IEEE80211_TX_STAT_ACK;
+		break;
+
+	case AR9170_TX_STATUS_FAILED:
+		retries = ar->hw->conf.long_frame_max_tx_count;
+		break;
+
+	default:
+		printk(KERN_ERR "%s: invalid tx_status response (%x).\n",
+		       wiphy_name(ar->hw->wiphy), tx_status);
+		break;
+	}
+
+	if (valid_status)
+		txinfo->status.rates[0].count = retries + 1;
+
+	skb_pull(skb, sizeof(struct ar9170_tx_control));
+	ieee80211_tx_status_irqsafe(ar->hw, skb);
+}
+
+static struct sk_buff *ar9170_find_skb_in_queue(struct ar9170 *ar,
+						const u8 *mac,
+						const u32 queue,
+						struct sk_buff_head *q)
+{
+	unsigned long flags;
+	struct sk_buff *skb;
+
+	spin_lock_irqsave(&q->lock, flags);
+	skb_queue_walk(q, skb) {
+		struct ar9170_tx_control *txc = (void *) skb->data;
+		struct ieee80211_hdr *hdr = (void *) txc->frame_data;
+		u32 txc_queue = (le32_to_cpu(txc->phy_control) &
+				AR9170_TX_PHY_QOS_MASK) >>
+				AR9170_TX_PHY_QOS_SHIFT;
+
+		if  ((queue != txc_queue) ||
+		     (compare_ether_addr(ieee80211_get_DA(hdr), mac)))
+			continue;
+
+		__skb_unlink(skb, q);
+		spin_unlock_irqrestore(&q->lock, flags);
+		return skb;
+	}
+	spin_unlock_irqrestore(&q->lock, flags);
+	return NULL;
+}
+
+static struct sk_buff *ar9170_find_queued_skb(struct ar9170 *ar, const u8 *mac,
+					      const u32 queue)
+{
+	struct ieee80211_sta *sta;
+	struct sk_buff *skb;
+
+	/*
+	 * Unfortunately, the firmware does not tell to which (queued) frame
+	 * this transmission status report belongs to.
+	 *
+	 * So we have to make risky guesses - with the scarce information
+	 * the firmware provided (-> destination MAC, and phy_control) -
+	 * and hope that we picked the right one...
+	 */
+	rcu_read_lock();
+	sta = ieee80211_find_sta(ar->hw, mac);
+
+	if (likely(sta)) {
+		struct ar9170_sta_info *sta_priv = (void *) sta->drv_priv;
+		skb = skb_dequeue(&sta_priv->tx_status[queue]);
+		rcu_read_unlock();
+		if (likely(skb))
+			return skb;
+	} else
+		rcu_read_unlock();
+
+	/* scan the waste queue for candidates */
+	skb = ar9170_find_skb_in_queue(ar, mac, queue,
+				       &ar->global_tx_status_waste);
+	if (!skb) {
+		/* so it still _must_ be in the global list. */
+		skb = ar9170_find_skb_in_queue(ar, mac, queue,
+					       &ar->global_tx_status);
+	}
+
+#ifdef AR9170_QUEUE_DEBUG
+	if (unlikely((!skb) && net_ratelimit())) {
+		printk(KERN_ERR "%s: ESS:[%pM] does not have any "
+				"outstanding frames in this queue (%d).\n",
+				wiphy_name(ar->hw->wiphy), mac, queue);
+	}
+#endif /* AR9170_QUEUE_DEBUG */
+	return skb;
+}
+
+/*
+ * This worker tries to keep the global tx_status queue empty.
+ * So we can guarantee that incoming tx_status reports for
+ * unregistered stations are always synced with the actual
+ * frame - which we think - belongs to.
+ */
+
+static void ar9170_tx_status_janitor(struct work_struct *work)
+{
+	struct ar9170 *ar = container_of(work, struct ar9170,
+					 tx_status_janitor.work);
+	struct sk_buff *skb;
+
+	if (unlikely(!IS_STARTED(ar)))
+		return ;
+
+	mutex_lock(&ar->mutex);
+	/* recycle the garbage back to mac80211... one by one. */
+	while ((skb = skb_dequeue(&ar->global_tx_status_waste))) {
+#ifdef AR9170_QUEUE_DEBUG
+		printk(KERN_DEBUG "%s: dispose queued frame =>\n",
+		       wiphy_name(ar->hw->wiphy));
+		ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+		ar9170_handle_tx_status(ar, skb, false,
+					AR9170_TX_STATUS_FAILED);
+	}
+
+	while ((skb = skb_dequeue(&ar->global_tx_status))) {
+#ifdef AR9170_QUEUE_DEBUG
+		printk(KERN_DEBUG "%s: moving frame into waste queue =>\n",
+		       wiphy_name(ar->hw->wiphy));
+
+		ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+		skb_queue_tail(&ar->global_tx_status_waste, skb);
+	}
+
+	/* recall the janitor in 100ms - if there's garbage in the can. */
+	if (skb_queue_len(&ar->global_tx_status_waste) > 0)
+		queue_delayed_work(ar->hw->workqueue, &ar->tx_status_janitor,
+				   msecs_to_jiffies(100));
+
+	mutex_unlock(&ar->mutex);
+}
+
+static void ar9170_handle_command_response(struct ar9170 *ar,
+					   void *buf, u32 len)
+{
+	struct ar9170_cmd_response *cmd = (void *) buf;
+
+	if ((cmd->type & 0xc0) != 0xc0) {
+		ar->callback_cmd(ar, len, buf);
+		return;
+	}
+
+	/* hardware event handlers */
+	switch (cmd->type) {
+	case 0xc1: {
+		/*
+		 * TX status notification:
+		 * bytes: 0c c1 XX YY M1 M2 M3 M4 M5 M6 R4 R3 R2 R1 S2 S1
+		 *
+		 * XX always 81
+		 * YY always 00
+		 * M1-M6 is the MAC address
+		 * R1-R4 is the transmit rate
+		 * S1-S2 is the transmit status
+		 */
+
+		struct sk_buff *skb;
+		u32 queue = (le32_to_cpu(cmd->tx_status.rate) &
+			    AR9170_TX_PHY_QOS_MASK) >> AR9170_TX_PHY_QOS_SHIFT;
+
+		skb = ar9170_find_queued_skb(ar, cmd->tx_status.dst, queue);
+		if (unlikely(!skb))
+			return ;
+
+		ar9170_handle_tx_status(ar, skb, true,
+					le16_to_cpu(cmd->tx_status.status));
+		break;
+		}
+
+	case 0xc0:
+		/*
+		 * pre-TBTT event
+		 */
+		if (ar->vif && ar->vif->type == NL80211_IFTYPE_AP)
+			queue_work(ar->hw->workqueue, &ar->beacon_work);
+		break;
+
+	case 0xc2:
+		/*
+		 * (IBSS) beacon send notification
+		 * bytes: 04 c2 XX YY B4 B3 B2 B1
+		 *
+		 * XX always 80
+		 * YY always 00
+		 * B1-B4 "should" be the number of send out beacons.
+		 */
+		break;
+
+	case 0xc3:
+		/* End of Atim Window */
+		break;
+
+	case 0xc4:
+	case 0xc5:
+		/* BlockACK events */
+		break;
+
+	case 0xc6:
+		/* Watchdog Interrupt */
+		break;
+
+	case 0xc9:
+		/* retransmission issue / SIFS/EIFS collision ?! */
+		break;
+
+	default:
+		printk(KERN_INFO "received unhandled event %x\n", cmd->type);
+		print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE, buf, len);
+		break;
+	}
+}
+
+/*
+ * If the frame alignment is right (or the kernel has
+ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), and there
+ * is only a single MPDU in the USB frame, then we can
+ * submit to mac80211 the SKB directly. However, since
+ * there may be multiple packets in one SKB in stream
+ * mode, and we need to observe the proper ordering,
+ * this is non-trivial.
+ */
+static void ar9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len)
+{
+	struct sk_buff *skb;
+	struct ar9170_rx_head *head = (void *)buf;
+	struct ar9170_rx_tail *tail;
+	struct ieee80211_rx_status status;
+	int mpdu_len, i;
+	u8 error, antennas = 0, decrypt;
+	__le16 fc;
+	int reserved;
+
+	if (unlikely(!IS_STARTED(ar)))
+		return ;
+
+	/* Received MPDU */
+	mpdu_len = len;
+	mpdu_len -= sizeof(struct ar9170_rx_head);
+	mpdu_len -= sizeof(struct ar9170_rx_tail);
+	BUILD_BUG_ON(sizeof(struct ar9170_rx_head) != 12);
+	BUILD_BUG_ON(sizeof(struct ar9170_rx_tail) != 24);
+
+	if (mpdu_len <= FCS_LEN)
+		return;
+
+	tail = (void *)(buf + sizeof(struct ar9170_rx_head) + mpdu_len);
+
+	for (i = 0; i < 3; i++)
+		if (tail->rssi[i] != 0x80)
+			antennas |= BIT(i);
+
+	/* post-process RSSI */
+	for (i = 0; i < 7; i++)
+		if (tail->rssi[i] & 0x80)
+			tail->rssi[i] = ((tail->rssi[i] & 0x7f) + 1) & 0x7f;
+
+	memset(&status, 0, sizeof(status));
+
+	status.band = ar->channel->band;
+	status.freq = ar->channel->center_freq;
+	status.signal = ar->noise[0] + tail->rssi_combined;
+	status.noise = ar->noise[0];
+	status.antenna = antennas;
+
+	switch (tail->status & AR9170_RX_STATUS_MODULATION_MASK) {
+	case AR9170_RX_STATUS_MODULATION_CCK:
+		if (tail->status & AR9170_RX_STATUS_SHORT_PREAMBLE)
+			status.flag |= RX_FLAG_SHORTPRE;
+		switch (head->plcp[0]) {
+		case 0x0a:
+			status.rate_idx = 0;
+			break;
+		case 0x14:
+			status.rate_idx = 1;
+			break;
+		case 0x37:
+			status.rate_idx = 2;
+			break;
+		case 0x6e:
+			status.rate_idx = 3;
+			break;
+		default:
+			if ((!ar->sniffer_enabled) && (net_ratelimit()))
+				printk(KERN_ERR "%s: invalid plcp cck rate "
+				       "(%x).\n", wiphy_name(ar->hw->wiphy),
+				       head->plcp[0]);
+			return;
+		}
+		break;
+	case AR9170_RX_STATUS_MODULATION_OFDM:
+		switch (head->plcp[0] & 0xF) {
+		case 0xB:
+			status.rate_idx = 0;
+			break;
+		case 0xF:
+			status.rate_idx = 1;
+			break;
+		case 0xA:
+			status.rate_idx = 2;
+			break;
+		case 0xE:
+			status.rate_idx = 3;
+			break;
+		case 0x9:
+			status.rate_idx = 4;
+			break;
+		case 0xD:
+			status.rate_idx = 5;
+			break;
+		case 0x8:
+			status.rate_idx = 6;
+			break;
+		case 0xC:
+			status.rate_idx = 7;
+			break;
+		default:
+			if ((!ar->sniffer_enabled) && (net_ratelimit()))
+				printk(KERN_ERR "%s: invalid plcp ofdm rate "
+				       "(%x).\n", wiphy_name(ar->hw->wiphy),
+				       head->plcp[0]);
+			return;
+		}
+		if (status.band == IEEE80211_BAND_2GHZ)
+			status.rate_idx += 4;
+		break;
+	case AR9170_RX_STATUS_MODULATION_HT:
+	case AR9170_RX_STATUS_MODULATION_DUPOFDM:
+		/* XXX */
+
+		if (net_ratelimit())
+			printk(KERN_ERR "%s: invalid modulation\n",
+			       wiphy_name(ar->hw->wiphy));
+		return;
+	}
+
+	error = tail->error;
+
+	if (error & AR9170_RX_ERROR_MMIC) {
+		status.flag |= RX_FLAG_MMIC_ERROR;
+		error &= ~AR9170_RX_ERROR_MMIC;
+	}
+
+	if (error & AR9170_RX_ERROR_PLCP) {
+		status.flag |= RX_FLAG_FAILED_PLCP_CRC;
+		error &= ~AR9170_RX_ERROR_PLCP;
+	}
+
+	if (error & AR9170_RX_ERROR_FCS) {
+		status.flag |= RX_FLAG_FAILED_FCS_CRC;
+		error &= ~AR9170_RX_ERROR_FCS;
+	}
+
+	decrypt = ar9170_get_decrypt_type(tail);
+	if (!(decrypt & AR9170_RX_ENC_SOFTWARE) &&
+	    decrypt != AR9170_ENC_ALG_NONE)
+		status.flag |= RX_FLAG_DECRYPTED;
+
+	/* ignore wrong RA errors */
+	error &= ~AR9170_RX_ERROR_WRONG_RA;
+
+	if (error & AR9170_RX_ERROR_DECRYPT) {
+		error &= ~AR9170_RX_ERROR_DECRYPT;
+
+		/*
+		 * Rx decryption is done in place,
+		 * the original data is lost anyway.
+		 */
+		return ;
+	}
+
+	/* drop any other error frames */
+	if ((error) && (net_ratelimit())) {
+		printk(KERN_DEBUG "%s: errors: %#x\n",
+		       wiphy_name(ar->hw->wiphy), error);
+		return;
+	}
+
+	buf += sizeof(struct ar9170_rx_head);
+	fc = *(__le16 *)buf;
+
+	if (ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc))
+		reserved = 32 + 2;
+	else
+		reserved = 32;
+
+	skb = dev_alloc_skb(mpdu_len + reserved);
+	if (!skb)
+		return;
+
+	skb_reserve(skb, reserved);
+	memcpy(skb_put(skb, mpdu_len), buf, mpdu_len);
+	ieee80211_rx_irqsafe(ar->hw, skb, &status);
+}
+
+void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb)
+{
+	unsigned int i, tlen, resplen;
+	u8 *tbuf, *respbuf;
+
+	tbuf = skb->data;
+	tlen = skb->len;
+
+	while (tlen >= 4) {
+		int clen = tbuf[1] << 8 | tbuf[0];
+		int wlen = (clen + 3) & ~3;
+
+		/*
+		 * parse stream (if any)
+		 */
+		if (tbuf[2] != 0 || tbuf[3] != 0x4e) {
+			printk(KERN_ERR "%s: missing tag!\n",
+			       wiphy_name(ar->hw->wiphy));
+			return ;
+		}
+		if (wlen > tlen - 4) {
+			printk(KERN_ERR "%s: invalid RX (%d, %d, %d)\n",
+			       wiphy_name(ar->hw->wiphy), clen, wlen, tlen);
+			print_hex_dump(KERN_DEBUG, "data: ",
+				       DUMP_PREFIX_OFFSET,
+				       16, 1, tbuf, tlen, true);
+			return ;
+		}
+		resplen = clen;
+		respbuf = tbuf + 4;
+		tbuf += wlen + 4;
+		tlen -= wlen + 4;
+
+		i = 0;
+
+		/* weird thing, but this is the same in the original driver */
+		while (resplen > 2 && i < 12 &&
+		       respbuf[0] == 0xff && respbuf[1] == 0xff) {
+			i += 2;
+			resplen -= 2;
+			respbuf += 2;
+		}
+
+		if (resplen < 4)
+			continue;
+
+		/* found the 6 * 0xffff marker? */
+		if (i == 12)
+			ar9170_handle_command_response(ar, respbuf, resplen);
+		else
+			ar9170_handle_mpdu(ar, respbuf, resplen);
+	}
+
+	if (tlen)
+		printk(KERN_ERR "%s: buffer remains!\n",
+		       wiphy_name(ar->hw->wiphy));
+}
+
+#define AR9170_FILL_QUEUE(queue, ai_fs, cwmin, cwmax, _txop)		\
+do {									\
+	queue.aifs = ai_fs;						\
+	queue.cw_min = cwmin;						\
+	queue.cw_max = cwmax;						\
+	queue.txop = _txop;						\
+} while (0)
+
+static int ar9170_op_start(struct ieee80211_hw *hw)
+{
+	struct ar9170 *ar = hw->priv;
+	int err, i;
+
+	mutex_lock(&ar->mutex);
+
+	/* reinitialize queues statistics */
+	memset(&ar->tx_stats, 0, sizeof(ar->tx_stats));
+	for (i = 0; i < ARRAY_SIZE(ar->tx_stats); i++)
+		ar->tx_stats[i].limit = 8;
+
+	/* reset QoS defaults */
+	AR9170_FILL_QUEUE(ar->edcf[0], 3, 15, 1023,  0); /* BEST EFFORT*/
+	AR9170_FILL_QUEUE(ar->edcf[1], 7, 15, 1023,  0); /* BACKGROUND */
+	AR9170_FILL_QUEUE(ar->edcf[2], 2, 7,    15, 94); /* VIDEO */
+	AR9170_FILL_QUEUE(ar->edcf[3], 2, 3,     7, 47); /* VOICE */
+	AR9170_FILL_QUEUE(ar->edcf[4], 2, 3,     7,  0); /* SPECIAL */
+
+	err = ar->open(ar);
+	if (err)
+		goto out;
+
+	err = ar9170_init_mac(ar);
+	if (err)
+		goto out;
+
+	err = ar9170_set_qos(ar);
+	if (err)
+		goto out;
+
+	err = ar9170_init_phy(ar, IEEE80211_BAND_2GHZ);
+	if (err)
+		goto out;
+
+	err = ar9170_init_rf(ar);
+	if (err)
+		goto out;
+
+	/* start DMA */
+	err = ar9170_write_reg(ar, 0x1c3d30, 0x100);
+	if (err)
+		goto out;
+
+	ar->state = AR9170_STARTED;
+
+out:
+	mutex_unlock(&ar->mutex);
+	return err;
+}
+
+static void ar9170_op_stop(struct ieee80211_hw *hw)
+{
+	struct ar9170 *ar = hw->priv;
+
+	if (IS_STARTED(ar))
+		ar->state = AR9170_IDLE;
+
+	mutex_lock(&ar->mutex);
+
+	cancel_delayed_work_sync(&ar->tx_status_janitor);
+	cancel_work_sync(&ar->filter_config_work);
+	cancel_work_sync(&ar->beacon_work);
+	skb_queue_purge(&ar->global_tx_status_waste);
+	skb_queue_purge(&ar->global_tx_status);
+
+	if (IS_ACCEPTING_CMD(ar)) {
+		ar9170_set_leds_state(ar, 0);
+
+		/* stop DMA */
+		ar9170_write_reg(ar, 0x1c3d30, 0);
+		ar->stop(ar);
+	}
+
+	mutex_unlock(&ar->mutex);
+}
+
+int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct ar9170 *ar = hw->priv;
+	struct ieee80211_hdr *hdr;
+	struct ar9170_tx_control *txc;
+	struct ieee80211_tx_info *info;
+	struct ieee80211_rate *rate = NULL;
+	struct ieee80211_tx_rate *txrate;
+	unsigned int queue = skb_get_queue_mapping(skb);
+	unsigned long flags = 0;
+	struct ar9170_sta_info *sta_info = NULL;
+	u32 power, chains;
+	u16 keytype = 0;
+	u16 len, icv = 0;
+	int err;
+	bool tx_status;
+
+	if (unlikely(!IS_STARTED(ar)))
+		goto err_free;
+
+	hdr = (void *)skb->data;
+	info = IEEE80211_SKB_CB(skb);
+	len = skb->len;
+
+	spin_lock_irqsave(&ar->tx_stats_lock, flags);
+	if (ar->tx_stats[queue].limit < ar->tx_stats[queue].len) {
+		spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
+		return NETDEV_TX_OK;
+	}
+
+	ar->tx_stats[queue].len++;
+	ar->tx_stats[queue].count++;
+	if (ar->tx_stats[queue].limit == ar->tx_stats[queue].len)
+		ieee80211_stop_queue(hw, queue);
+
+	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
+
+	txc = (void *)skb_push(skb, sizeof(*txc));
+
+	tx_status = (((info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) != 0) ||
+		    ((info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) != 0));
+
+	if (info->control.hw_key) {
+		icv = info->control.hw_key->icv_len;
+
+		switch (info->control.hw_key->alg) {
+		case ALG_WEP:
+			keytype = AR9170_TX_MAC_ENCR_RC4;
+			break;
+		case ALG_TKIP:
+			keytype = AR9170_TX_MAC_ENCR_RC4;
+			break;
+		case ALG_CCMP:
+			keytype = AR9170_TX_MAC_ENCR_AES;
+			break;
+		default:
+			WARN_ON(1);
+			goto err_dequeue;
+		}
+	}
+
+	/* Length */
+	txc->length = cpu_to_le16(len + icv + 4);
+
+	txc->mac_control = cpu_to_le16(AR9170_TX_MAC_HW_DURATION |
+				       AR9170_TX_MAC_BACKOFF);
+	txc->mac_control |= cpu_to_le16(ar9170_qos_hwmap[queue] <<
+					AR9170_TX_MAC_QOS_SHIFT);
+	txc->mac_control |= cpu_to_le16(keytype);
+	txc->phy_control = cpu_to_le32(0);
+
+	if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_NO_ACK);
+
+	if (info->flags & IEEE80211_TX_CTL_AMPDU)
+		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_AGGR);
+
+	txrate = &info->control.rates[0];
+
+	if (txrate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
+		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_CTS);
+	else if (txrate->flags & IEEE80211_TX_RC_USE_RTS_CTS)
+		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_RTS);
+
+	if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD)
+		txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_GREENFIELD);
+
+	if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+		txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_SHORT_PREAMBLE);
+
+	if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+		txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ);
+	/* this works because 40 MHz is 2 and dup is 3 */
+	if (txrate->flags & IEEE80211_TX_RC_DUP_DATA)
+		txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ_DUP);
+
+	if (txrate->flags & IEEE80211_TX_RC_SHORT_GI)
+		txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_SHORT_GI);
+
+	if (txrate->flags & IEEE80211_TX_RC_MCS) {
+		u32 r = txrate->idx;
+		u8 *txpower;
+
+		r <<= AR9170_TX_PHY_MCS_SHIFT;
+		if (WARN_ON(r & ~AR9170_TX_PHY_MCS_MASK))
+			goto err_dequeue;
+		txc->phy_control |= cpu_to_le32(r & AR9170_TX_PHY_MCS_MASK);
+		txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_MOD_HT);
+
+		if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) {
+			if (info->band == IEEE80211_BAND_5GHZ)
+				txpower = ar->power_5G_ht40;
+			else
+				txpower = ar->power_2G_ht40;
+		} else {
+			if (info->band == IEEE80211_BAND_5GHZ)
+				txpower = ar->power_5G_ht20;
+			else
+				txpower = ar->power_2G_ht20;
+		}
+
+		power = txpower[(txrate->idx) & 7];
+	} else {
+		u8 *txpower;
+		u32 mod;
+		u32 phyrate;
+		u8 idx = txrate->idx;
+
+		if (info->band != IEEE80211_BAND_2GHZ) {
+			idx += 4;
+			txpower = ar->power_5G_leg;
+			mod = AR9170_TX_PHY_MOD_OFDM;
+		} else {
+			if (idx < 4) {
+				txpower = ar->power_2G_cck;
+				mod = AR9170_TX_PHY_MOD_CCK;
+			} else {
+				mod = AR9170_TX_PHY_MOD_OFDM;
+				txpower = ar->power_2G_ofdm;
+			}
+		}
+
+		rate = &__ar9170_ratetable[idx];
+
+		phyrate = rate->hw_value & 0xF;
+		power = txpower[(rate->hw_value & 0x30) >> 4];
+		phyrate <<= AR9170_TX_PHY_MCS_SHIFT;
+
+		txc->phy_control |= cpu_to_le32(mod);
+		txc->phy_control |= cpu_to_le32(phyrate);
+	}
+
+	power <<= AR9170_TX_PHY_TX_PWR_SHIFT;
+	power &= AR9170_TX_PHY_TX_PWR_MASK;
+	txc->phy_control |= cpu_to_le32(power);
+
+	/* set TX chains */
+	if (ar->eeprom.tx_mask == 1) {
+		chains = AR9170_TX_PHY_TXCHAIN_1;
+	} else {
+		chains = AR9170_TX_PHY_TXCHAIN_2;
+
+		/* >= 36M legacy OFDM - use only one chain */
+		if (rate && rate->bitrate >= 360)
+			chains = AR9170_TX_PHY_TXCHAIN_1;
+	}
+	txc->phy_control |= cpu_to_le32(chains << AR9170_TX_PHY_TXCHAIN_SHIFT);
+
+	if (tx_status) {
+		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE);
+		/*
+		 * WARNING:
+		 * Putting the QoS queue bits into an unexplored territory is
+		 * certainly not elegant.
+		 *
+		 * In my defense: This idea provides a reasonable way to
+		 * smuggle valuable information to the tx_status callback.
+		 * Also, the idea behind this bit-abuse came straight from
+		 * the original driver code.
+		 */
+
+		txc->phy_control |=
+			cpu_to_le32(queue << AR9170_TX_PHY_QOS_SHIFT);
+
+		if (info->control.sta) {
+			sta_info = (void *) info->control.sta->drv_priv;
+			skb_queue_tail(&sta_info->tx_status[queue], skb);
+		} else {
+			skb_queue_tail(&ar->global_tx_status, skb);
+
+			queue_delayed_work(ar->hw->workqueue,
+					   &ar->tx_status_janitor,
+					   msecs_to_jiffies(100));
+		}
+	}
+
+	err = ar->tx(ar, skb, tx_status, 0);
+	if (unlikely(tx_status && err)) {
+		if (info->control.sta)
+			skb_unlink(skb, &sta_info->tx_status[queue]);
+		else
+			skb_unlink(skb, &ar->global_tx_status);
+	}
+
+	return NETDEV_TX_OK;
+
+err_dequeue:
+	spin_lock_irqsave(&ar->tx_stats_lock, flags);
+	ar->tx_stats[queue].len--;
+	ar->tx_stats[queue].count--;
+	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
+
+err_free:
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+}
+
+static int ar9170_op_add_interface(struct ieee80211_hw *hw,
+				   struct ieee80211_if_init_conf *conf)
+{
+	struct ar9170 *ar = hw->priv;
+	int err = 0;
+
+	mutex_lock(&ar->mutex);
+
+	if (ar->vif) {
+		err = -EBUSY;
+		goto unlock;
+	}
+
+	ar->vif = conf->vif;
+	memcpy(ar->mac_addr, conf->mac_addr, ETH_ALEN);
+
+	if (modparam_nohwcrypt || (ar->vif->type != NL80211_IFTYPE_STATION)) {
+		ar->rx_software_decryption = true;
+		ar->disable_offload = true;
+	}
+
+	ar->cur_filter = 0;
+	ar->want_filter = AR9170_MAC_REG_FTF_DEFAULTS;
+	err = ar9170_update_frame_filter(ar);
+	if (err)
+		goto unlock;
+
+	err = ar9170_set_operating_mode(ar);
+
+unlock:
+	mutex_unlock(&ar->mutex);
+	return err;
+}
+
+static void ar9170_op_remove_interface(struct ieee80211_hw *hw,
+				       struct ieee80211_if_init_conf *conf)
+{
+	struct ar9170 *ar = hw->priv;
+
+	mutex_lock(&ar->mutex);
+	ar->vif = NULL;
+	ar->want_filter = 0;
+	ar9170_update_frame_filter(ar);
+	ar9170_set_beacon_timers(ar);
+	dev_kfree_skb(ar->beacon);
+	ar->beacon = NULL;
+	ar->sniffer_enabled = false;
+	ar->rx_software_decryption = false;
+	ar9170_set_operating_mode(ar);
+	mutex_unlock(&ar->mutex);
+}
+
+static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct ar9170 *ar = hw->priv;
+	int err = 0;
+
+	mutex_lock(&ar->mutex);
+
+	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
+		/* TODO */
+		err = 0;
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
+		/* TODO */
+		err = 0;
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_PS) {
+		/* TODO */
+		err = 0;
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		/* TODO */
+		err = 0;
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
+		/*
+		 * is it long_frame_max_tx_count or short_frame_max_tx_count?
+		 */
+
+		err = ar9170_set_hwretry_limit(ar,
+			ar->hw->conf.long_frame_max_tx_count);
+		if (err)
+			goto out;
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) {
+		err = ar9170_set_beacon_timers(ar);
+		if (err)
+			goto out;
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		err = ar9170_set_channel(ar, hw->conf.channel,
+					 AR9170_RFI_NONE, AR9170_BW_20);
+		if (err)
+			goto out;
+		/* adjust slot time for 5 GHz */
+		if (hw->conf.channel->band == IEEE80211_BAND_5GHZ)
+			err = ar9170_write_reg(ar, AR9170_MAC_REG_SLOT_TIME,
+					       9 << 10);
+	}
+
+out:
+	mutex_unlock(&ar->mutex);
+	return err;
+}
+
+static int ar9170_op_config_interface(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif,
+				      struct ieee80211_if_conf *conf)
+{
+	struct ar9170 *ar = hw->priv;
+	int err = 0;
+
+	mutex_lock(&ar->mutex);
+
+	if (conf->changed & IEEE80211_IFCC_BSSID) {
+		memcpy(ar->bssid, conf->bssid, ETH_ALEN);
+		err = ar9170_set_operating_mode(ar);
+	}
+
+	if (conf->changed & IEEE80211_IFCC_BEACON) {
+		err = ar9170_update_beacon(ar);
+
+		if (err)
+			goto out;
+		err = ar9170_set_beacon_timers(ar);
+	}
+
+out:
+	mutex_unlock(&ar->mutex);
+	return err;
+}
+
+static void ar9170_set_filters(struct work_struct *work)
+{
+	struct ar9170 *ar = container_of(work, struct ar9170,
+					 filter_config_work);
+	int err;
+
+	mutex_lock(&ar->mutex);
+	if (unlikely(!IS_STARTED(ar)))
+		goto unlock;
+
+	if (ar->filter_changed & AR9170_FILTER_CHANGED_PROMISC) {
+		err = ar9170_set_operating_mode(ar);
+		if (err)
+			goto unlock;
+	}
+
+	if (ar->filter_changed & AR9170_FILTER_CHANGED_MULTICAST) {
+		err = ar9170_update_multicast(ar);
+		if (err)
+			goto unlock;
+	}
+
+	if (ar->filter_changed & AR9170_FILTER_CHANGED_FRAMEFILTER)
+		err = ar9170_update_frame_filter(ar);
+
+unlock:
+	mutex_unlock(&ar->mutex);
+}
+
+static void ar9170_op_configure_filter(struct ieee80211_hw *hw,
+				       unsigned int changed_flags,
+				       unsigned int *new_flags,
+				       int mc_count, struct dev_mc_list *mclist)
+{
+	struct ar9170 *ar = hw->priv;
+
+	/* mask supported flags */
+	*new_flags &= FIF_ALLMULTI | FIF_CONTROL | FIF_BCN_PRBRESP_PROMISC |
+		      FIF_PROMISC_IN_BSS;
+
+	/*
+	 * We can support more by setting the sniffer bit and
+	 * then checking the error flags, later.
+	 */
+
+	if (changed_flags & FIF_ALLMULTI) {
+		if (*new_flags & FIF_ALLMULTI) {
+			ar->want_mc_hash = ~0ULL;
+		} else {
+			u64 mchash;
+			int i;
+
+			/* always get broadcast frames */
+			mchash = 1ULL << (0xff>>2);
+
+			for (i = 0; i < mc_count; i++) {
+				if (WARN_ON(!mclist))
+					break;
+				mchash |= 1ULL << (mclist->dmi_addr[5] >> 2);
+				mclist = mclist->next;
+			}
+		ar->want_mc_hash = mchash;
+		}
+		ar->filter_changed |= AR9170_FILTER_CHANGED_MULTICAST;
+	}
+
+	if (changed_flags & FIF_CONTROL) {
+		u32 filter = AR9170_MAC_REG_FTF_PSPOLL |
+			     AR9170_MAC_REG_FTF_RTS |
+			     AR9170_MAC_REG_FTF_CTS |
+			     AR9170_MAC_REG_FTF_ACK |
+			     AR9170_MAC_REG_FTF_CFE |
+			     AR9170_MAC_REG_FTF_CFE_ACK;
+
+		if (*new_flags & FIF_CONTROL)
+			ar->want_filter = ar->cur_filter | filter;
+		else
+			ar->want_filter = ar->cur_filter & ~filter;
+
+		ar->filter_changed |= AR9170_FILTER_CHANGED_FRAMEFILTER;
+	}
+
+	if (changed_flags & FIF_PROMISC_IN_BSS) {
+		ar->sniffer_enabled = ((*new_flags) & FIF_PROMISC_IN_BSS) != 0;
+		ar->filter_changed |= AR9170_FILTER_CHANGED_PROMISC;
+	}
+
+	if (likely(IS_STARTED(ar)))
+		queue_work(ar->hw->workqueue, &ar->filter_config_work);
+}
+
+static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       struct ieee80211_bss_conf *bss_conf,
+				       u32 changed)
+{
+	struct ar9170 *ar = hw->priv;
+	int err = 0;
+
+	mutex_lock(&ar->mutex);
+
+	ar9170_regwrite_begin(ar);
+
+	if (changed & BSS_CHANGED_ASSOC) {
+		ar->state = bss_conf->assoc ? AR9170_ASSOCIATED : ar->state;
+
+#ifndef CONFIG_AR9170_LEDS
+		/* enable assoc LED. */
+		err = ar9170_set_leds_state(ar, bss_conf->assoc ? 2 : 0);
+#endif /* CONFIG_AR9170_LEDS */
+	}
+
+	if (changed & BSS_CHANGED_HT) {
+		/* TODO */
+		err = 0;
+	}
+
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		u32 slottime = 20;
+
+		if (bss_conf->use_short_slot)
+			slottime = 9;
+
+		ar9170_regwrite(AR9170_MAC_REG_SLOT_TIME, slottime << 10);
+	}
+
+	if (changed & BSS_CHANGED_BASIC_RATES) {
+		u32 cck, ofdm;
+
+		if (hw->conf.channel->band == IEEE80211_BAND_5GHZ) {
+			ofdm = bss_conf->basic_rates;
+			cck = 0;
+		} else {
+			/* four cck rates */
+			cck = bss_conf->basic_rates & 0xf;
+			ofdm = bss_conf->basic_rates >> 4;
+		}
+		ar9170_regwrite(AR9170_MAC_REG_BASIC_RATE,
+				ofdm << 8 | cck);
+	}
+
+	ar9170_regwrite_finish();
+	err = ar9170_regwrite_result();
+	mutex_unlock(&ar->mutex);
+}
+
+static u64 ar9170_op_get_tsf(struct ieee80211_hw *hw)
+{
+	struct ar9170 *ar = hw->priv;
+	int err;
+	u32 tsf_low;
+	u32 tsf_high;
+	u64 tsf;
+
+	mutex_lock(&ar->mutex);
+	err = ar9170_read_reg(ar, AR9170_MAC_REG_TSF_L, &tsf_low);
+	if (!err)
+		err = ar9170_read_reg(ar, AR9170_MAC_REG_TSF_H, &tsf_high);
+	mutex_unlock(&ar->mutex);
+
+	if (WARN_ON(err))
+		return 0;
+
+	tsf = tsf_high;
+	tsf = (tsf << 32) | tsf_low;
+	return tsf;
+}
+
+static int ar9170_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			  struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+			  struct ieee80211_key_conf *key)
+{
+	struct ar9170 *ar = hw->priv;
+	int err = 0, i;
+	u8 ktype;
+
+	if ((!ar->vif) || (ar->disable_offload))
+		return -EOPNOTSUPP;
+
+	switch (key->alg) {
+	case ALG_WEP:
+		if (key->keylen == LEN_WEP40)
+			ktype = AR9170_ENC_ALG_WEP64;
+		else
+			ktype = AR9170_ENC_ALG_WEP128;
+		break;
+	case ALG_TKIP:
+		ktype = AR9170_ENC_ALG_TKIP;
+		break;
+	case ALG_CCMP:
+		ktype = AR9170_ENC_ALG_AESCCMP;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	mutex_lock(&ar->mutex);
+	if (cmd == SET_KEY) {
+		if (unlikely(!IS_STARTED(ar))) {
+			err = -EOPNOTSUPP;
+			goto out;
+		}
+
+		/* group keys need all-zeroes address */
+		if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+			sta = NULL;
+
+		if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
+			for (i = 0; i < 64; i++)
+				if (!(ar->usedkeys & BIT(i)))
+					break;
+			if (i == 64) {
+				ar->rx_software_decryption = true;
+				ar9170_set_operating_mode(ar);
+				err = -ENOSPC;
+				goto out;
+			}
+		} else {
+			i = 64 + key->keyidx;
+		}
+
+		key->hw_key_idx = i;
+
+		err = ar9170_upload_key(ar, i, sta ? sta->addr : NULL, ktype, 0,
+					key->key, min_t(u8, 16, key->keylen));
+		if (err)
+			goto out;
+
+		if (key->alg == ALG_TKIP) {
+			err = ar9170_upload_key(ar, i, sta ? sta->addr : NULL,
+						ktype, 1, key->key + 16, 16);
+			if (err)
+				goto out;
+
+			/*
+			 * hardware is not capable generating the MMIC
+			 * for fragmented frames!
+			 */
+			key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		}
+
+		if (i < 64)
+			ar->usedkeys |= BIT(i);
+
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+	} else {
+		if (unlikely(!IS_STARTED(ar))) {
+			/* The device is gone... together with the key ;-) */
+			err = 0;
+			goto out;
+		}
+
+		err = ar9170_disable_key(ar, key->hw_key_idx);
+		if (err)
+			goto out;
+
+		if (key->hw_key_idx < 64) {
+			ar->usedkeys &= ~BIT(key->hw_key_idx);
+		} else {
+			err = ar9170_upload_key(ar, key->hw_key_idx, NULL,
+						AR9170_ENC_ALG_NONE, 0,
+						NULL, 0);
+			if (err)
+				goto out;
+
+			if (key->alg == ALG_TKIP) {
+				err = ar9170_upload_key(ar, key->hw_key_idx,
+							NULL,
+							AR9170_ENC_ALG_NONE, 1,
+							NULL, 0);
+				if (err)
+					goto out;
+			}
+
+		}
+	}
+
+	ar9170_regwrite_begin(ar);
+	ar9170_regwrite(AR9170_MAC_REG_ROLL_CALL_TBL_L, ar->usedkeys);
+	ar9170_regwrite(AR9170_MAC_REG_ROLL_CALL_TBL_H, ar->usedkeys >> 32);
+	ar9170_regwrite_finish();
+	err = ar9170_regwrite_result();
+
+out:
+	mutex_unlock(&ar->mutex);
+
+	return err;
+}
+
+static void ar9170_sta_notify(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
+			      enum sta_notify_cmd cmd,
+			      struct ieee80211_sta *sta)
+{
+	struct ar9170 *ar = hw->priv;
+	struct ar9170_sta_info *info = (void *) sta->drv_priv;
+	struct sk_buff *skb;
+	unsigned int i;
+
+	switch (cmd) {
+	case STA_NOTIFY_ADD:
+		for (i = 0; i < ar->hw->queues; i++)
+			skb_queue_head_init(&info->tx_status[i]);
+		break;
+
+	case STA_NOTIFY_REMOVE:
+
+		/*
+		 * transfer all outstanding frames that need a tx_status
+		 * reports to the global tx_status queue
+		 */
+
+		for (i = 0; i < ar->hw->queues; i++) {
+			while ((skb = skb_dequeue(&info->tx_status[i]))) {
+#ifdef AR9170_QUEUE_DEBUG
+				printk(KERN_DEBUG "%s: queueing frame in "
+					  "global tx_status queue =>\n",
+				       wiphy_name(ar->hw->wiphy));
+
+				ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+				skb_queue_tail(&ar->global_tx_status, skb);
+			}
+		}
+		queue_delayed_work(ar->hw->workqueue, &ar->tx_status_janitor,
+				   msecs_to_jiffies(100));
+		break;
+
+	default:
+		break;
+	}
+}
+
+static int ar9170_get_stats(struct ieee80211_hw *hw,
+			    struct ieee80211_low_level_stats *stats)
+{
+	struct ar9170 *ar = hw->priv;
+	u32 val;
+	int err;
+
+	mutex_lock(&ar->mutex);
+	err = ar9170_read_reg(ar, AR9170_MAC_REG_TX_RETRY, &val);
+	ar->stats.dot11ACKFailureCount += val;
+
+	memcpy(stats, &ar->stats, sizeof(*stats));
+	mutex_unlock(&ar->mutex);
+
+	return 0;
+}
+
+static int ar9170_get_tx_stats(struct ieee80211_hw *hw,
+			       struct ieee80211_tx_queue_stats *tx_stats)
+{
+	struct ar9170 *ar = hw->priv;
+
+	spin_lock_bh(&ar->tx_stats_lock);
+	memcpy(tx_stats, ar->tx_stats, sizeof(tx_stats[0]) * hw->queues);
+	spin_unlock_bh(&ar->tx_stats_lock);
+
+	return 0;
+}
+
+static int ar9170_conf_tx(struct ieee80211_hw *hw, u16 queue,
+			  const struct ieee80211_tx_queue_params *param)
+{
+	struct ar9170 *ar = hw->priv;
+	int ret;
+
+	mutex_lock(&ar->mutex);
+	if ((param) && !(queue > ar->hw->queues)) {
+		memcpy(&ar->edcf[ar9170_qos_hwmap[queue]],
+		       param, sizeof(*param));
+
+		ret = ar9170_set_qos(ar);
+	} else
+		ret = -EINVAL;
+
+	mutex_unlock(&ar->mutex);
+	return ret;
+}
+
+static const struct ieee80211_ops ar9170_ops = {
+	.start			= ar9170_op_start,
+	.stop			= ar9170_op_stop,
+	.tx			= ar9170_op_tx,
+	.add_interface		= ar9170_op_add_interface,
+	.remove_interface	= ar9170_op_remove_interface,
+	.config			= ar9170_op_config,
+	.config_interface	= ar9170_op_config_interface,
+	.configure_filter	= ar9170_op_configure_filter,
+	.conf_tx		= ar9170_conf_tx,
+	.bss_info_changed	= ar9170_op_bss_info_changed,
+	.get_tsf		= ar9170_op_get_tsf,
+	.set_key		= ar9170_set_key,
+	.sta_notify		= ar9170_sta_notify,
+	.get_stats		= ar9170_get_stats,
+	.get_tx_stats		= ar9170_get_tx_stats,
+};
+
+void *ar9170_alloc(size_t priv_size)
+{
+	struct ieee80211_hw *hw;
+	struct ar9170 *ar;
+	int i;
+
+	hw = ieee80211_alloc_hw(priv_size, &ar9170_ops);
+	if (!hw)
+		return ERR_PTR(-ENOMEM);
+
+	ar = hw->priv;
+	ar->hw = hw;
+
+	mutex_init(&ar->mutex);
+	spin_lock_init(&ar->cmdlock);
+	spin_lock_init(&ar->tx_stats_lock);
+	skb_queue_head_init(&ar->global_tx_status);
+	skb_queue_head_init(&ar->global_tx_status_waste);
+	INIT_WORK(&ar->filter_config_work, ar9170_set_filters);
+	INIT_WORK(&ar->beacon_work, ar9170_new_beacon);
+	INIT_DELAYED_WORK(&ar->tx_status_janitor, ar9170_tx_status_janitor);
+
+	/* all hw supports 2.4 GHz, so set channel to 1 by default */
+	ar->channel = &ar9170_2ghz_chantable[0];
+
+	/* first part of wiphy init */
+	ar->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+					 BIT(NL80211_IFTYPE_WDS) |
+					 BIT(NL80211_IFTYPE_ADHOC);
+	ar->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS |
+			 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+			 IEEE80211_HW_SIGNAL_DBM |
+			 IEEE80211_HW_NOISE_DBM;
+
+	ar->hw->queues = __AR9170_NUM_TXQ;
+	ar->hw->extra_tx_headroom = 8;
+	ar->hw->sta_data_size = sizeof(struct ar9170_sta_info);
+
+	ar->hw->max_rates = 1;
+	ar->hw->max_rate_tries = 3;
+
+	for (i = 0; i < ARRAY_SIZE(ar->noise); i++)
+		ar->noise[i] = -95; /* ATH_DEFAULT_NOISE_FLOOR */
+
+	return ar;
+}
+
+static int ar9170_read_eeprom(struct ar9170 *ar)
+{
+#define RW	8	/* number of words to read at once */
+#define RB	(sizeof(u32) * RW)
+	DECLARE_MAC_BUF(mbuf);
+	u8 *eeprom = (void *)&ar->eeprom;
+	u8 *addr = ar->eeprom.mac_address;
+	__le32 offsets[RW];
+	int i, j, err, bands = 0;
+
+	BUILD_BUG_ON(sizeof(ar->eeprom) & 3);
+
+	BUILD_BUG_ON(RB > AR9170_MAX_CMD_LEN - 4);
+#ifndef __CHECKER__
+	/* don't want to handle trailing remains */
+	BUILD_BUG_ON(sizeof(ar->eeprom) % RB);
+#endif
+
+	for (i = 0; i < sizeof(ar->eeprom)/RB; i++) {
+		for (j = 0; j < RW; j++)
+			offsets[j] = cpu_to_le32(AR9170_EEPROM_START +
+						 RB * i + 4 * j);
+
+		err = ar->exec_cmd(ar, AR9170_CMD_RREG,
+				   RB, (u8 *) &offsets,
+				   RB, eeprom + RB * i);
+		if (err)
+			return err;
+	}
+
+#undef RW
+#undef RB
+
+	if (ar->eeprom.length == cpu_to_le16(0xFFFF))
+		return -ENODATA;
+
+	if (ar->eeprom.operating_flags & AR9170_OPFLAG_2GHZ) {
+		ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &ar9170_band_2GHz;
+		bands++;
+	}
+	if (ar->eeprom.operating_flags & AR9170_OPFLAG_5GHZ) {
+		ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &ar9170_band_5GHz;
+		bands++;
+	}
+	/*
+	 * I measured this, a bandswitch takes roughly
+	 * 135 ms and a frequency switch about 80.
+	 *
+	 * FIXME: measure these values again once EEPROM settings
+	 *	  are used, that will influence them!
+	 */
+	if (bands == 2)
+		ar->hw->channel_change_time = 135 * 1000;
+	else
+		ar->hw->channel_change_time = 80 * 1000;
+
+	/* second part of wiphy init */
+	SET_IEEE80211_PERM_ADDR(ar->hw, addr);
+
+	return bands ? 0 : -EINVAL;
+}
+
+int ar9170_register(struct ar9170 *ar, struct device *pdev)
+{
+	int err;
+
+	/* try to read EEPROM, init MAC addr */
+	err = ar9170_read_eeprom(ar);
+	if (err)
+		goto err_out;
+
+	err = ieee80211_register_hw(ar->hw);
+	if (err)
+		goto err_out;
+
+	err = ar9170_init_leds(ar);
+	if (err)
+		goto err_unreg;
+
+#ifdef CONFIG_AR9170_LEDS
+	err = ar9170_register_leds(ar);
+	if (err)
+		goto err_unreg;
+#endif /* CONFIG_AR9170_LEDS */
+
+	dev_info(pdev, "Atheros AR9170 is registered as '%s'\n",
+		 wiphy_name(ar->hw->wiphy));
+
+	return err;
+
+err_unreg:
+	ieee80211_unregister_hw(ar->hw);
+
+err_out:
+	return err;
+}
+
+void ar9170_unregister(struct ar9170 *ar)
+{
+#ifdef CONFIG_AR9170_LEDS
+	ar9170_unregister_leds(ar);
+#endif /* CONFIG_AR9170_LEDS */
+
+	ieee80211_unregister_hw(ar->hw);
+	mutex_destroy(&ar->mutex);
+}
diff --git a/drivers/net/wireless/ar9170/phy.c b/drivers/net/wireless/ar9170/phy.c
new file mode 100644
index 000000000000..6ce20754b8e7
--- /dev/null
+++ b/drivers/net/wireless/ar9170/phy.c
@@ -0,0 +1,1240 @@
+/*
+ * Atheros AR9170 driver
+ *
+ * PHY and RF code
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *    Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ *    Permission to use, copy, modify, and/or distribute this software for any
+ *    purpose with or without fee is hereby granted, provided that the above
+ *    copyright notice and this permission notice appear in all copies.
+ *
+ *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/bitrev.h>
+#include "ar9170.h"
+#include "cmd.h"
+
+static int ar9170_init_power_cal(struct ar9170 *ar)
+{
+	ar9170_regwrite_begin(ar);
+
+	ar9170_regwrite(0x1bc000 + 0x993c, 0x7f);
+	ar9170_regwrite(0x1bc000 + 0x9934, 0x3f3f3f3f);
+	ar9170_regwrite(0x1bc000 + 0x9938, 0x3f3f3f3f);
+	ar9170_regwrite(0x1bc000 + 0xa234, 0x3f3f3f3f);
+	ar9170_regwrite(0x1bc000 + 0xa238, 0x3f3f3f3f);
+	ar9170_regwrite(0x1bc000 + 0xa38c, 0x3f3f3f3f);
+	ar9170_regwrite(0x1bc000 + 0xa390, 0x3f3f3f3f);
+	ar9170_regwrite(0x1bc000 + 0xa3cc, 0x3f3f3f3f);
+	ar9170_regwrite(0x1bc000 + 0xa3d0, 0x3f3f3f3f);
+	ar9170_regwrite(0x1bc000 + 0xa3d4, 0x3f3f3f3f);
+
+	ar9170_regwrite_finish();
+	return ar9170_regwrite_result();
+}
+
+struct ar9170_phy_init {
+	u32 reg, _5ghz_20, _5ghz_40, _2ghz_40, _2ghz_20;
+};
+
+static struct ar9170_phy_init ar5416_phy_init[] = {
+	{ 0x1c5800, 0x00000007, 0x00000007, 0x00000007, 0x00000007, },
+	{ 0x1c5804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, },
+	{ 0x1c5808, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c580c, 0xad848e19, 0xad848e19, 0xad848e19, 0xad848e19, },
+	{ 0x1c5810, 0x7d14e000, 0x7d14e000, 0x7d14e000, 0x7d14e000, },
+	{ 0x1c5814, 0x9c0a9f6b, 0x9c0a9f6b, 0x9c0a9f6b, 0x9c0a9f6b, },
+	{ 0x1c5818, 0x00000090, 0x00000090, 0x00000090, 0x00000090, },
+	{ 0x1c581c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, },
+	{ 0x1c5824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, },
+	{ 0x1c5828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, },
+	{ 0x1c582c, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, },
+	{ 0x1c5830, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, },
+	{ 0x1c5838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, },
+	{ 0x1c583c, 0x00200400, 0x00200400, 0x00200400, 0x00200400, },
+	{ 0x1c5840, 0x206a002e, 0x206a002e, 0x206a002e, 0x206a002e, },
+	{ 0x1c5844, 0x1372161e, 0x13721c1e, 0x13721c24, 0x137216a4, },
+	{ 0x1c5848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, },
+	{ 0x1c584c, 0x1284233c, 0x1284233c, 0x1284233c, 0x1284233c, },
+	{ 0x1c5850, 0x6c48b4e4, 0x6c48b4e4, 0x6c48b0e4, 0x6c48b0e4, },
+	{ 0x1c5854, 0x00000859, 0x00000859, 0x00000859, 0x00000859, },
+	{ 0x1c5858, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, },
+	{ 0x1c585c, 0x31395c5e, 0x31395c5e, 0x31395c5e, 0x31395c5e, },
+	{ 0x1c5860, 0x0004dd10, 0x0004dd10, 0x0004dd20, 0x0004dd20, },
+	{ 0x1c5868, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, },
+	{ 0x1c586c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, },
+	{ 0x1c5900, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5904, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5908, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c590c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, },
+	{ 0x1c5918, 0x00000118, 0x00000230, 0x00000268, 0x00000134, },
+	{ 0x1c591c, 0x10000fff, 0x10000fff, 0x10000fff, 0x10000fff, },
+	{ 0x1c5920, 0x0510081c, 0x0510081c, 0x0510001c, 0x0510001c, },
+	{ 0x1c5924, 0xd0058a15, 0xd0058a15, 0xd0058a15, 0xd0058a15, },
+	{ 0x1c5928, 0x00000001, 0x00000001, 0x00000001, 0x00000001, },
+	{ 0x1c592c, 0x00000004, 0x00000004, 0x00000004, 0x00000004, },
+	{ 0x1c5934, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
+	{ 0x1c5938, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
+	{ 0x1c593c, 0x0000007f, 0x0000007f, 0x0000007f, 0x0000007f, },
+	{ 0x1c5944, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020, },
+	{ 0x1c5948, 0x9280b212, 0x9280b212, 0x9280b212, 0x9280b212, },
+	{ 0x1c594c, 0x00020028, 0x00020028, 0x00020028, 0x00020028, },
+	{ 0x1c5954, 0x5d50e188, 0x5d50e188, 0x5d50e188, 0x5d50e188, },
+	{ 0x1c5958, 0x00081fff, 0x00081fff, 0x00081fff, 0x00081fff, },
+	{ 0x1c5960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, },
+	{ 0x1c5964, 0x00001120, 0x00001120, 0x00001120, 0x00001120, },
+	{ 0x1c5970, 0x190fb515, 0x190fb515, 0x190fb515, 0x190fb515, },
+	{ 0x1c5974, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5978, 0x00000001, 0x00000001, 0x00000001, 0x00000001, },
+	{ 0x1c597c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5980, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5984, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5988, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c598c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5990, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5994, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5998, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c599c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c59a0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c59a4, 0x00000007, 0x00000007, 0x00000007, 0x00000007, },
+	{ 0x1c59a8, 0x001fff00, 0x001fff00, 0x001fff00, 0x001fff00, },
+	{ 0x1c59ac, 0x006f00c4, 0x006f00c4, 0x006f00c4, 0x006f00c4, },
+	{ 0x1c59b0, 0x03051000, 0x03051000, 0x03051000, 0x03051000, },
+	{ 0x1c59b4, 0x00000820, 0x00000820, 0x00000820, 0x00000820, },
+	{ 0x1c59c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, },
+	{ 0x1c59c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, },
+	{ 0x1c59c8, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c, },
+	{ 0x1c59cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, },
+	{ 0x1c59d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, },
+	{ 0x1c59d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c59d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c59dc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c59e0, 0x00000200, 0x00000200, 0x00000200, 0x00000200, },
+	{ 0x1c59e4, 0x64646464, 0x64646464, 0x64646464, 0x64646464, },
+	{ 0x1c59e8, 0x3c787878, 0x3c787878, 0x3c787878, 0x3c787878, },
+	{ 0x1c59ec, 0x000000aa, 0x000000aa, 0x000000aa, 0x000000aa, },
+	{ 0x1c59f0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c59fc, 0x00001042, 0x00001042, 0x00001042, 0x00001042, },
+	{ 0x1c5a00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5a04, 0x00000040, 0x00000040, 0x00000040, 0x00000040, },
+	{ 0x1c5a08, 0x00000080, 0x00000080, 0x00000080, 0x00000080, },
+	{ 0x1c5a0c, 0x000001a1, 0x000001a1, 0x00000141, 0x00000141, },
+	{ 0x1c5a10, 0x000001e1, 0x000001e1, 0x00000181, 0x00000181, },
+	{ 0x1c5a14, 0x00000021, 0x00000021, 0x000001c1, 0x000001c1, },
+	{ 0x1c5a18, 0x00000061, 0x00000061, 0x00000001, 0x00000001, },
+	{ 0x1c5a1c, 0x00000168, 0x00000168, 0x00000041, 0x00000041, },
+	{ 0x1c5a20, 0x000001a8, 0x000001a8, 0x000001a8, 0x000001a8, },
+	{ 0x1c5a24, 0x000001e8, 0x000001e8, 0x000001e8, 0x000001e8, },
+	{ 0x1c5a28, 0x00000028, 0x00000028, 0x00000028, 0x00000028, },
+	{ 0x1c5a2c, 0x00000068, 0x00000068, 0x00000068, 0x00000068, },
+	{ 0x1c5a30, 0x00000189, 0x00000189, 0x000000a8, 0x000000a8, },
+	{ 0x1c5a34, 0x000001c9, 0x000001c9, 0x00000169, 0x00000169, },
+	{ 0x1c5a38, 0x00000009, 0x00000009, 0x000001a9, 0x000001a9, },
+	{ 0x1c5a3c, 0x00000049, 0x00000049, 0x000001e9, 0x000001e9, },
+	{ 0x1c5a40, 0x00000089, 0x00000089, 0x00000029, 0x00000029, },
+	{ 0x1c5a44, 0x00000170, 0x00000170, 0x00000069, 0x00000069, },
+	{ 0x1c5a48, 0x000001b0, 0x000001b0, 0x00000190, 0x00000190, },
+	{ 0x1c5a4c, 0x000001f0, 0x000001f0, 0x000001d0, 0x000001d0, },
+	{ 0x1c5a50, 0x00000030, 0x00000030, 0x00000010, 0x00000010, },
+	{ 0x1c5a54, 0x00000070, 0x00000070, 0x00000050, 0x00000050, },
+	{ 0x1c5a58, 0x00000191, 0x00000191, 0x00000090, 0x00000090, },
+	{ 0x1c5a5c, 0x000001d1, 0x000001d1, 0x00000151, 0x00000151, },
+	{ 0x1c5a60, 0x00000011, 0x00000011, 0x00000191, 0x00000191, },
+	{ 0x1c5a64, 0x00000051, 0x00000051, 0x000001d1, 0x000001d1, },
+	{ 0x1c5a68, 0x00000091, 0x00000091, 0x00000011, 0x00000011, },
+	{ 0x1c5a6c, 0x000001b8, 0x000001b8, 0x00000051, 0x00000051, },
+	{ 0x1c5a70, 0x000001f8, 0x000001f8, 0x00000198, 0x00000198, },
+	{ 0x1c5a74, 0x00000038, 0x00000038, 0x000001d8, 0x000001d8, },
+	{ 0x1c5a78, 0x00000078, 0x00000078, 0x00000018, 0x00000018, },
+	{ 0x1c5a7c, 0x00000199, 0x00000199, 0x00000058, 0x00000058, },
+	{ 0x1c5a80, 0x000001d9, 0x000001d9, 0x00000098, 0x00000098, },
+	{ 0x1c5a84, 0x00000019, 0x00000019, 0x00000159, 0x00000159, },
+	{ 0x1c5a88, 0x00000059, 0x00000059, 0x00000199, 0x00000199, },
+	{ 0x1c5a8c, 0x00000099, 0x00000099, 0x000001d9, 0x000001d9, },
+	{ 0x1c5a90, 0x000000d9, 0x000000d9, 0x00000019, 0x00000019, },
+	{ 0x1c5a94, 0x000000f9, 0x000000f9, 0x00000059, 0x00000059, },
+	{ 0x1c5a98, 0x000000f9, 0x000000f9, 0x00000099, 0x00000099, },
+	{ 0x1c5a9c, 0x000000f9, 0x000000f9, 0x000000d9, 0x000000d9, },
+	{ 0x1c5aa0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5aa4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5aa8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5aac, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ab0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ab4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ab8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5abc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ac0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ac4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ac8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5acc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ad0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ad4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ad8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5adc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ae0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ae4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5ae8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5aec, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5af0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5af4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5af8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5afc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, },
+	{ 0x1c5b00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5b04, 0x00000001, 0x00000001, 0x00000001, 0x00000001, },
+	{ 0x1c5b08, 0x00000002, 0x00000002, 0x00000002, 0x00000002, },
+	{ 0x1c5b0c, 0x00000003, 0x00000003, 0x00000003, 0x00000003, },
+	{ 0x1c5b10, 0x00000004, 0x00000004, 0x00000004, 0x00000004, },
+	{ 0x1c5b14, 0x00000005, 0x00000005, 0x00000005, 0x00000005, },
+	{ 0x1c5b18, 0x00000008, 0x00000008, 0x00000008, 0x00000008, },
+	{ 0x1c5b1c, 0x00000009, 0x00000009, 0x00000009, 0x00000009, },
+	{ 0x1c5b20, 0x0000000a, 0x0000000a, 0x0000000a, 0x0000000a, },
+	{ 0x1c5b24, 0x0000000b, 0x0000000b, 0x0000000b, 0x0000000b, },
+	{ 0x1c5b28, 0x0000000c, 0x0000000c, 0x0000000c, 0x0000000c, },
+	{ 0x1c5b2c, 0x0000000d, 0x0000000d, 0x0000000d, 0x0000000d, },
+	{ 0x1c5b30, 0x00000010, 0x00000010, 0x00000010, 0x00000010, },
+	{ 0x1c5b34, 0x00000011, 0x00000011, 0x00000011, 0x00000011, },
+	{ 0x1c5b38, 0x00000012, 0x00000012, 0x00000012, 0x00000012, },
+	{ 0x1c5b3c, 0x00000013, 0x00000013, 0x00000013, 0x00000013, },
+	{ 0x1c5b40, 0x00000014, 0x00000014, 0x00000014, 0x00000014, },
+	{ 0x1c5b44, 0x00000015, 0x00000015, 0x00000015, 0x00000015, },
+	{ 0x1c5b48, 0x00000018, 0x00000018, 0x00000018, 0x00000018, },
+	{ 0x1c5b4c, 0x00000019, 0x00000019, 0x00000019, 0x00000019, },
+	{ 0x1c5b50, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, },
+	{ 0x1c5b54, 0x0000001b, 0x0000001b, 0x0000001b, 0x0000001b, },
+	{ 0x1c5b58, 0x0000001c, 0x0000001c, 0x0000001c, 0x0000001c, },
+	{ 0x1c5b5c, 0x0000001d, 0x0000001d, 0x0000001d, 0x0000001d, },
+	{ 0x1c5b60, 0x00000020, 0x00000020, 0x00000020, 0x00000020, },
+	{ 0x1c5b64, 0x00000021, 0x00000021, 0x00000021, 0x00000021, },
+	{ 0x1c5b68, 0x00000022, 0x00000022, 0x00000022, 0x00000022, },
+	{ 0x1c5b6c, 0x00000023, 0x00000023, 0x00000023, 0x00000023, },
+	{ 0x1c5b70, 0x00000024, 0x00000024, 0x00000024, 0x00000024, },
+	{ 0x1c5b74, 0x00000025, 0x00000025, 0x00000025, 0x00000025, },
+	{ 0x1c5b78, 0x00000028, 0x00000028, 0x00000028, 0x00000028, },
+	{ 0x1c5b7c, 0x00000029, 0x00000029, 0x00000029, 0x00000029, },
+	{ 0x1c5b80, 0x0000002a, 0x0000002a, 0x0000002a, 0x0000002a, },
+	{ 0x1c5b84, 0x0000002b, 0x0000002b, 0x0000002b, 0x0000002b, },
+	{ 0x1c5b88, 0x0000002c, 0x0000002c, 0x0000002c, 0x0000002c, },
+	{ 0x1c5b8c, 0x0000002d, 0x0000002d, 0x0000002d, 0x0000002d, },
+	{ 0x1c5b90, 0x00000030, 0x00000030, 0x00000030, 0x00000030, },
+	{ 0x1c5b94, 0x00000031, 0x00000031, 0x00000031, 0x00000031, },
+	{ 0x1c5b98, 0x00000032, 0x00000032, 0x00000032, 0x00000032, },
+	{ 0x1c5b9c, 0x00000033, 0x00000033, 0x00000033, 0x00000033, },
+	{ 0x1c5ba0, 0x00000034, 0x00000034, 0x00000034, 0x00000034, },
+	{ 0x1c5ba4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5ba8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bac, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bb0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bb4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bb8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bbc, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bc0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bc4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bc8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bcc, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bd0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bd4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bd8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bdc, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5be0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5be4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5be8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bec, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bf0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bf4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, },
+	{ 0x1c5bf8, 0x00000010, 0x00000010, 0x00000010, 0x00000010, },
+	{ 0x1c5bfc, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, },
+	{ 0x1c5c00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c0c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c10, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c14, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c18, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c1c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c20, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c24, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c28, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c2c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c30, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c34, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c38, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5c3c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5cf0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5cf4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5cf8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c5cfc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c6200, 0x00000008, 0x00000008, 0x0000000e, 0x0000000e, },
+	{ 0x1c6204, 0x00000440, 0x00000440, 0x00000440, 0x00000440, },
+	{ 0x1c6208, 0xd6be4788, 0xd6be4788, 0xd03e4788, 0xd03e4788, },
+	{ 0x1c620c, 0x012e8160, 0x012e8160, 0x012a8160, 0x012a8160, },
+	{ 0x1c6210, 0x40806333, 0x40806333, 0x40806333, 0x40806333, },
+	{ 0x1c6214, 0x00106c10, 0x00106c10, 0x00106c10, 0x00106c10, },
+	{ 0x1c6218, 0x009c4060, 0x009c4060, 0x009c4060, 0x009c4060, },
+	{ 0x1c621c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, },
+	{ 0x1c6220, 0x018830c6, 0x018830c6, 0x018830c6, 0x018830c6, },
+	{ 0x1c6224, 0x00000400, 0x00000400, 0x00000400, 0x00000400, },
+	{ 0x1c6228, 0x000009b5, 0x000009b5, 0x000009b5, 0x000009b5, },
+	{ 0x1c622c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c6230, 0x00000108, 0x00000210, 0x00000210, 0x00000108, },
+	{ 0x1c6234, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
+	{ 0x1c6238, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
+	{ 0x1c623c, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, },
+	{ 0x1c6240, 0x38490a20, 0x38490a20, 0x38490a20, 0x38490a20, },
+	{ 0x1c6244, 0x00007bb6, 0x00007bb6, 0x00007bb6, 0x00007bb6, },
+	{ 0x1c6248, 0x0fff3ffc, 0x0fff3ffc, 0x0fff3ffc, 0x0fff3ffc, },
+	{ 0x1c624c, 0x00000001, 0x00000001, 0x00000001, 0x00000001, },
+	{ 0x1c6250, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, },
+	{ 0x1c6254, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c6258, 0x0cc75380, 0x0cc75380, 0x0cc75380, 0x0cc75380, },
+	{ 0x1c625c, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, },
+	{ 0x1c6260, 0xdfa91f01, 0xdfa91f01, 0xdfa91f01, 0xdfa91f01, },
+	{ 0x1c6264, 0x00418a11, 0x00418a11, 0x00418a11, 0x00418a11, },
+	{ 0x1c6268, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c626c, 0x09249126, 0x09249126, 0x09249126, 0x09249126, },
+	{ 0x1c6274, 0x0a1a9caa, 0x0a1a9caa, 0x0a1a7caa, 0x0a1a7caa, },
+	{ 0x1c6278, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, },
+	{ 0x1c627c, 0x051701ce, 0x051701ce, 0x051701ce, 0x051701ce, },
+	{ 0x1c6300, 0x18010000, 0x18010000, 0x18010000, 0x18010000, },
+	{ 0x1c6304, 0x30032602, 0x30032602, 0x2e032402, 0x2e032402, },
+	{ 0x1c6308, 0x48073e06, 0x48073e06, 0x4a0a3c06, 0x4a0a3c06, },
+	{ 0x1c630c, 0x560b4c0a, 0x560b4c0a, 0x621a540b, 0x621a540b, },
+	{ 0x1c6310, 0x641a600f, 0x641a600f, 0x764f6c1b, 0x764f6c1b, },
+	{ 0x1c6314, 0x7a4f6e1b, 0x7a4f6e1b, 0x845b7a5a, 0x845b7a5a, },
+	{ 0x1c6318, 0x8c5b7e5a, 0x8c5b7e5a, 0x950f8ccf, 0x950f8ccf, },
+	{ 0x1c631c, 0x9d0f96cf, 0x9d0f96cf, 0xa5cf9b4f, 0xa5cf9b4f, },
+	{ 0x1c6320, 0xb51fa69f, 0xb51fa69f, 0xbddfaf1f, 0xbddfaf1f, },
+	{ 0x1c6324, 0xcb3fbd07, 0xcb3fbcbf, 0xd1ffc93f, 0xd1ffc93f, },
+	{ 0x1c6328, 0x0000d7bf, 0x0000d7bf, 0x00000000, 0x00000000, },
+	{ 0x1c632c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c6330, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c6334, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c6338, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c633c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c6340, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c6344, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c6348, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, },
+	{ 0x1c634c, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, },
+	{ 0x1c6350, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, },
+	{ 0x1c6354, 0x0003ffff, 0x0003ffff, 0x0003ffff, 0x0003ffff, },
+	{ 0x1c6358, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, },
+	{ 0x1c6388, 0x08000000, 0x08000000, 0x08000000, 0x08000000, },
+	{ 0x1c638c, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
+	{ 0x1c6390, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
+	{ 0x1c6394, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, },
+	{ 0x1c6398, 0x000001ce, 0x000001ce, 0x000001ce, 0x000001ce, },
+	{ 0x1c639c, 0x00000007, 0x00000007, 0x00000007, 0x00000007, },
+	{ 0x1c63a0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63a4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63a8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63ac, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63b0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63b4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63b8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63bc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63c0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63c4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63c8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63cc, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
+	{ 0x1c63d0, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
+	{ 0x1c63d4, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, },
+	{ 0x1c63d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, },
+	{ 0x1c63dc, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, },
+	{ 0x1c63e0, 0x000000c0, 0x000000c0, 0x000000c0, 0x000000c0, },
+	{ 0x1c6848, 0x00180a65, 0x00180a65, 0x00180a68, 0x00180a68, },
+	{ 0x1c6920, 0x0510001c, 0x0510001c, 0x0510001c, 0x0510001c, },
+	{ 0x1c6960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, },
+	{ 0x1c720c, 0x012e8160, 0x012e8160, 0x012a8160, 0x012a8160, },
+	{ 0x1c726c, 0x09249126, 0x09249126, 0x09249126, 0x09249126, },
+	{ 0x1c7848, 0x00180a65, 0x00180a65, 0x00180a68, 0x00180a68, },
+	{ 0x1c7920, 0x0510001c, 0x0510001c, 0x0510001c, 0x0510001c, },
+	{ 0x1c7960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, },
+	{ 0x1c820c, 0x012e8160, 0x012e8160, 0x012a8160, 0x012a8160, },
+	{ 0x1c826c, 0x09249126, 0x09249126, 0x09249126, 0x09249126, },
+/*	{ 0x1c8864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, }, */
+	{ 0x1c8864, 0x0001c600, 0x0001c600, 0x0001c600, 0x0001c600, },
+	{ 0x1c895c, 0x004b6a8e, 0x004b6a8e, 0x004b6a8e, 0x004b6a8e, },
+	{ 0x1c8968, 0x000003ce, 0x000003ce, 0x000003ce, 0x000003ce, },
+	{ 0x1c89bc, 0x00181400, 0x00181400, 0x00181400, 0x00181400, },
+	{ 0x1c9270, 0x00820820, 0x00820820, 0x00820820, 0x00820820, },
+	{ 0x1c935c, 0x066c420f, 0x066c420f, 0x066c420f, 0x066c420f, },
+	{ 0x1c9360, 0x0f282207, 0x0f282207, 0x0f282207, 0x0f282207, },
+	{ 0x1c9364, 0x17601685, 0x17601685, 0x17601685, 0x17601685, },
+	{ 0x1c9368, 0x1f801104, 0x1f801104, 0x1f801104, 0x1f801104, },
+	{ 0x1c936c, 0x37a00c03, 0x37a00c03, 0x37a00c03, 0x37a00c03, },
+	{ 0x1c9370, 0x3fc40883, 0x3fc40883, 0x3fc40883, 0x3fc40883, },
+	{ 0x1c9374, 0x57c00803, 0x57c00803, 0x57c00803, 0x57c00803, },
+	{ 0x1c9378, 0x5fd80682, 0x5fd80682, 0x5fd80682, 0x5fd80682, },
+	{ 0x1c937c, 0x7fe00482, 0x7fe00482, 0x7fe00482, 0x7fe00482, },
+	{ 0x1c9380, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, },
+	{ 0x1c9384, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, }
+};
+
+int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band)
+{
+	int i, err;
+	u32 val;
+	bool is_2ghz = band == IEEE80211_BAND_2GHZ;
+	bool is_40mhz = false; /* XXX: for now */
+
+	ar9170_regwrite_begin(ar);
+
+	for (i = 0; i < ARRAY_SIZE(ar5416_phy_init); i++) {
+		if (is_40mhz) {
+			if (is_2ghz)
+				val = ar5416_phy_init[i]._2ghz_40;
+			else
+				val = ar5416_phy_init[i]._5ghz_40;
+		} else {
+			if (is_2ghz)
+				val = ar5416_phy_init[i]._2ghz_20;
+			else
+				val = ar5416_phy_init[i]._5ghz_20;
+		}
+
+		ar9170_regwrite(ar5416_phy_init[i].reg, val);
+	}
+
+	ar9170_regwrite_finish();
+	err = ar9170_regwrite_result();
+	if (err)
+		return err;
+
+	/* XXX: use EEPROM data here! */
+
+	err = ar9170_init_power_cal(ar);
+	if (err)
+		return err;
+
+	/* XXX: remove magic! */
+	if (is_2ghz)
+		err = ar9170_write_reg(ar, 0x1d4014, 0x5163);
+	else
+		err = ar9170_write_reg(ar, 0x1d4014, 0x5143);
+
+	return err;
+}
+
+struct ar9170_rf_init {
+	u32 reg, _5ghz, _2ghz;
+};
+
+static struct ar9170_rf_init ar9170_rf_init[] = {
+     /* bank 0 */
+     { 0x1c58b0,  0x1e5795e5,  0x1e5795e5},
+     { 0x1c58e0,  0x02008020,  0x02008020},
+     /* bank 1 */
+     { 0x1c58b0,  0x02108421,  0x02108421},
+     { 0x1c58ec,  0x00000008,  0x00000008},
+     /* bank 2 */
+     { 0x1c58b0,  0x0e73ff17,  0x0e73ff17},
+     { 0x1c58e0,  0x00000420,  0x00000420},
+     /* bank 3 */
+     { 0x1c58f0,  0x01400018,  0x01c00018},
+     /* bank 4 */
+     { 0x1c58b0,  0x000001a1,  0x000001a1},
+     { 0x1c58e8,  0x00000001,  0x00000001},
+     /* bank 5 */
+     { 0x1c58b0,  0x00000013,  0x00000013},
+     { 0x1c58e4,  0x00000002,  0x00000002},
+     /* bank 6 */
+     { 0x1c58b0,  0x00000000,  0x00000000},
+     { 0x1c58b0,  0x00000000,  0x00000000},
+     { 0x1c58b0,  0x00000000,  0x00000000},
+     { 0x1c58b0,  0x00000000,  0x00000000},
+     { 0x1c58b0,  0x00000000,  0x00000000},
+     { 0x1c58b0,  0x00004000,  0x00004000},
+     { 0x1c58b0,  0x00006c00,  0x00006c00},
+     { 0x1c58b0,  0x00002c00,  0x00002c00},
+     { 0x1c58b0,  0x00004800,  0x00004800},
+     { 0x1c58b0,  0x00004000,  0x00004000},
+     { 0x1c58b0,  0x00006000,  0x00006000},
+     { 0x1c58b0,  0x00001000,  0x00001000},
+     { 0x1c58b0,  0x00004000,  0x00004000},
+     { 0x1c58b0,  0x00007c00,  0x00007c00},
+     { 0x1c58b0,  0x00007c00,  0x00007c00},
+     { 0x1c58b0,  0x00007c00,  0x00007c00},
+     { 0x1c58b0,  0x00007c00,  0x00007c00},
+     { 0x1c58b0,  0x00007c00,  0x00007c00},
+     { 0x1c58b0,  0x00087c00,  0x00087c00},
+     { 0x1c58b0,  0x00007c00,  0x00007c00},
+     { 0x1c58b0,  0x00005400,  0x00005400},
+     { 0x1c58b0,  0x00000c00,  0x00000c00},
+     { 0x1c58b0,  0x00001800,  0x00001800},
+     { 0x1c58b0,  0x00007c00,  0x00007c00},
+     { 0x1c58b0,  0x00006c00,  0x00006c00},
+     { 0x1c58b0,  0x00006c00,  0x00006c00},
+     { 0x1c58b0,  0x00007c00,  0x00007c00},
+     { 0x1c58b0,  0x00002c00,  0x00002c00},
+     { 0x1c58b0,  0x00003c00,  0x00003c00},
+     { 0x1c58b0,  0x00003800,  0x00003800},
+     { 0x1c58b0,  0x00001c00,  0x00001c00},
+     { 0x1c58b0,  0x00000800,  0x00000800},
+     { 0x1c58b0,  0x00000408,  0x00000408},
+     { 0x1c58b0,  0x00004c15,  0x00004c15},
+     { 0x1c58b0,  0x00004188,  0x00004188},
+     { 0x1c58b0,  0x0000201e,  0x0000201e},
+     { 0x1c58b0,  0x00010408,  0x00010408},
+     { 0x1c58b0,  0x00000801,  0x00000801},
+     { 0x1c58b0,  0x00000c08,  0x00000c08},
+     { 0x1c58b0,  0x0000181e,  0x0000181e},
+     { 0x1c58b0,  0x00001016,  0x00001016},
+     { 0x1c58b0,  0x00002800,  0x00002800},
+     { 0x1c58b0,  0x00004010,  0x00004010},
+     { 0x1c58b0,  0x0000081c,  0x0000081c},
+     { 0x1c58b0,  0x00000115,  0x00000115},
+     { 0x1c58b0,  0x00000015,  0x00000015},
+     { 0x1c58b0,  0x00000066,  0x00000066},
+     { 0x1c58b0,  0x0000001c,  0x0000001c},
+     { 0x1c58b0,  0x00000000,  0x00000000},
+     { 0x1c58b0,  0x00000004,  0x00000004},
+     { 0x1c58b0,  0x00000015,  0x00000015},
+     { 0x1c58b0,  0x0000001f,  0x0000001f},
+     { 0x1c58e0,  0x00000000,  0x00000400},
+     /* bank 7 */
+     { 0x1c58b0,  0x000000a0,  0x000000a0},
+     { 0x1c58b0,  0x00000000,  0x00000000},
+     { 0x1c58b0,  0x00000040,  0x00000040},
+     { 0x1c58f0,  0x0000001c,  0x0000001c},
+};
+
+static int ar9170_init_rf_banks_0_7(struct ar9170 *ar, bool band5ghz)
+{
+	int err, i;
+
+	ar9170_regwrite_begin(ar);
+
+	for (i = 0; i < ARRAY_SIZE(ar9170_rf_init); i++)
+		ar9170_regwrite(ar9170_rf_init[i].reg,
+				band5ghz ? ar9170_rf_init[i]._5ghz
+					 : ar9170_rf_init[i]._2ghz);
+
+	ar9170_regwrite_finish();
+	err = ar9170_regwrite_result();
+	if (err)
+		printk(KERN_ERR "%s: rf init failed\n",
+		       wiphy_name(ar->hw->wiphy));
+	return err;
+}
+
+static int ar9170_init_rf_bank4_pwr(struct ar9170 *ar, bool band5ghz,
+				    u32 freq, enum ar9170_bw bw)
+{
+	int err;
+	u32 d0, d1, td0, td1, fd0, fd1;
+	u8 chansel;
+	u8 refsel0 = 1, refsel1 = 0;
+	u8 lf_synth = 0;
+
+	switch (bw) {
+	case AR9170_BW_40_ABOVE:
+		freq += 10;
+		break;
+	case AR9170_BW_40_BELOW:
+		freq -= 10;
+		break;
+	case AR9170_BW_20:
+		break;
+	case __AR9170_NUM_BW:
+		BUG();
+	}
+
+	if (band5ghz) {
+		if (freq % 10) {
+			chansel = (freq - 4800) / 5;
+		} else {
+			chansel = ((freq - 4800) / 10) * 2;
+			refsel0 = 0;
+			refsel1 = 1;
+		}
+		chansel = byte_rev_table[chansel];
+	} else {
+		if (freq == 2484) {
+			chansel = 10 + (freq - 2274) / 5;
+			lf_synth = 1;
+		} else
+			chansel = 16 + (freq - 2272) / 5;
+		chansel *= 4;
+		chansel = byte_rev_table[chansel];
+	}
+
+	d1 =	chansel;
+	d0 =	0x21 |
+		refsel0 << 3 |
+		refsel1 << 2 |
+		lf_synth << 1;
+	td0 =	d0 & 0x1f;
+	td1 =	d1 & 0x1f;
+	fd0 =	td1 << 5 | td0;
+
+	td0 =	(d0 >> 5) & 0x7;
+	td1 =	(d1 >> 5) & 0x7;
+	fd1 =	td1 << 5 | td0;
+
+	ar9170_regwrite_begin(ar);
+
+	ar9170_regwrite(0x1c58b0, fd0);
+	ar9170_regwrite(0x1c58e8, fd1);
+
+	ar9170_regwrite_finish();
+	err = ar9170_regwrite_result();
+	if (err)
+		return err;
+
+	msleep(10);
+
+	return 0;
+}
+
+struct ar9170_phy_freq_params {
+	u8 coeff_exp;
+	u16 coeff_man;
+	u8 coeff_exp_shgi;
+	u16 coeff_man_shgi;
+};
+
+struct ar9170_phy_freq_entry {
+	u16 freq;
+	struct ar9170_phy_freq_params params[__AR9170_NUM_BW];
+};
+
+/* NB: must be in sync with channel tables in main! */
+static const struct ar9170_phy_freq_entry ar9170_phy_freq_params[] = {
+/*
+ *	freq,
+ *		20MHz,
+ *		40MHz (below),
+ *		40Mhz (above),
+ */
+	{ 2412, {
+		{ 3, 21737, 3, 19563, },
+		{ 3, 21827, 3, 19644, },
+		{ 3, 21647, 3, 19482, },
+	} },
+	{ 2417, {
+		{ 3, 21692, 3, 19523, },
+		{ 3, 21782, 3, 19604, },
+		{ 3, 21602, 3, 19442, },
+	} },
+	{ 2422, {
+		{ 3, 21647, 3, 19482, },
+		{ 3, 21737, 3, 19563, },
+		{ 3, 21558, 3, 19402, },
+	} },
+	{ 2427, {
+		{ 3, 21602, 3, 19442, },
+		{ 3, 21692, 3, 19523, },
+		{ 3, 21514, 3, 19362, },
+	} },
+	{ 2432, {
+		{ 3, 21558, 3, 19402, },
+		{ 3, 21647, 3, 19482, },
+		{ 3, 21470, 3, 19323, },
+	} },
+	{ 2437, {
+		{ 3, 21514, 3, 19362, },
+		{ 3, 21602, 3, 19442, },
+		{ 3, 21426, 3, 19283, },
+	} },
+	{ 2442, {
+		{ 3, 21470, 3, 19323, },
+		{ 3, 21558, 3, 19402, },
+		{ 3, 21382, 3, 19244, },
+	} },
+	{ 2447, {
+		{ 3, 21426, 3, 19283, },
+		{ 3, 21514, 3, 19362, },
+		{ 3, 21339, 3, 19205, },
+	} },
+	{ 2452, {
+		{ 3, 21382, 3, 19244, },
+		{ 3, 21470, 3, 19323, },
+		{ 3, 21295, 3, 19166, },
+	} },
+	{ 2457, {
+		{ 3, 21339, 3, 19205, },
+		{ 3, 21426, 3, 19283, },
+		{ 3, 21252, 3, 19127, },
+	} },
+	{ 2462, {
+		{ 3, 21295, 3, 19166, },
+		{ 3, 21382, 3, 19244, },
+		{ 3, 21209, 3, 19088, },
+	} },
+	{ 2467, {
+		{ 3, 21252, 3, 19127, },
+		{ 3, 21339, 3, 19205, },
+		{ 3, 21166, 3, 19050, },
+	} },
+	{ 2472, {
+		{ 3, 21209, 3, 19088, },
+		{ 3, 21295, 3, 19166, },
+		{ 3, 21124, 3, 19011, },
+	} },
+	{ 2484, {
+		{ 3, 21107, 3, 18996, },
+		{ 3, 21192, 3, 19073, },
+		{ 3, 21022, 3, 18920, },
+	} },
+	{ 4920, {
+		{ 4, 21313, 4, 19181, },
+		{ 4, 21356, 4, 19220, },
+		{ 4, 21269, 4, 19142, },
+	} },
+	{ 4940, {
+		{ 4, 21226, 4, 19104, },
+		{ 4, 21269, 4, 19142, },
+		{ 4, 21183, 4, 19065, },
+	} },
+	{ 4960, {
+		{ 4, 21141, 4, 19027, },
+		{ 4, 21183, 4, 19065, },
+		{ 4, 21098, 4, 18988, },
+	} },
+	{ 4980, {
+		{ 4, 21056, 4, 18950, },
+		{ 4, 21098, 4, 18988, },
+		{ 4, 21014, 4, 18912, },
+	} },
+	{ 5040, {
+		{ 4, 20805, 4, 18725, },
+		{ 4, 20846, 4, 18762, },
+		{ 4, 20764, 4, 18687, },
+	} },
+	{ 5060, {
+		{ 4, 20723, 4, 18651, },
+		{ 4, 20764, 4, 18687, },
+		{ 4, 20682, 4, 18614, },
+	} },
+	{ 5080, {
+		{ 4, 20641, 4, 18577, },
+		{ 4, 20682, 4, 18614, },
+		{ 4, 20601, 4, 18541, },
+	} },
+	{ 5180, {
+		{ 4, 20243, 4, 18219, },
+		{ 4, 20282, 4, 18254, },
+		{ 4, 20204, 4, 18183, },
+	} },
+	{ 5200, {
+		{ 4, 20165, 4, 18148, },
+		{ 4, 20204, 4, 18183, },
+		{ 4, 20126, 4, 18114, },
+	} },
+	{ 5220, {
+		{ 4, 20088, 4, 18079, },
+		{ 4, 20126, 4, 18114, },
+		{ 4, 20049, 4, 18044, },
+	} },
+	{ 5240, {
+		{ 4, 20011, 4, 18010, },
+		{ 4, 20049, 4, 18044, },
+		{ 4, 19973, 4, 17976, },
+	} },
+	{ 5260, {
+		{ 4, 19935, 4, 17941, },
+		{ 4, 19973, 4, 17976, },
+		{ 4, 19897, 4, 17907, },
+	} },
+	{ 5280, {
+		{ 4, 19859, 4, 17873, },
+		{ 4, 19897, 4, 17907, },
+		{ 4, 19822, 4, 17840, },
+	} },
+	{ 5300, {
+		{ 4, 19784, 4, 17806, },
+		{ 4, 19822, 4, 17840, },
+		{ 4, 19747, 4, 17772, },
+	} },
+	{ 5320, {
+		{ 4, 19710, 4, 17739, },
+		{ 4, 19747, 4, 17772, },
+		{ 4, 19673, 4, 17706, },
+	} },
+	{ 5500, {
+		{ 4, 19065, 4, 17159, },
+		{ 4, 19100, 4, 17190, },
+		{ 4, 19030, 4, 17127, },
+	} },
+	{ 5520, {
+		{ 4, 18996, 4, 17096, },
+		{ 4, 19030, 4, 17127, },
+		{ 4, 18962, 4, 17065, },
+	} },
+	{ 5540, {
+		{ 4, 18927, 4, 17035, },
+		{ 4, 18962, 4, 17065, },
+		{ 4, 18893, 4, 17004, },
+	} },
+	{ 5560, {
+		{ 4, 18859, 4, 16973, },
+		{ 4, 18893, 4, 17004, },
+		{ 4, 18825, 4, 16943, },
+	} },
+	{ 5580, {
+		{ 4, 18792, 4, 16913, },
+		{ 4, 18825, 4, 16943, },
+		{ 4, 18758, 4, 16882, },
+	} },
+	{ 5600, {
+		{ 4, 18725, 4, 16852, },
+		{ 4, 18758, 4, 16882, },
+		{ 4, 18691, 4, 16822, },
+	} },
+	{ 5620, {
+		{ 4, 18658, 4, 16792, },
+		{ 4, 18691, 4, 16822, },
+		{ 4, 18625, 4, 16762, },
+	} },
+	{ 5640, {
+		{ 4, 18592, 4, 16733, },
+		{ 4, 18625, 4, 16762, },
+		{ 4, 18559, 4, 16703, },
+	} },
+	{ 5660, {
+		{ 4, 18526, 4, 16673, },
+		{ 4, 18559, 4, 16703, },
+		{ 4, 18493, 4, 16644, },
+	} },
+	{ 5680, {
+		{ 4, 18461, 4, 16615, },
+		{ 4, 18493, 4, 16644, },
+		{ 4, 18428, 4, 16586, },
+	} },
+	{ 5700, {
+		{ 4, 18396, 4, 16556, },
+		{ 4, 18428, 4, 16586, },
+		{ 4, 18364, 4, 16527, },
+	} },
+	{ 5745, {
+		{ 4, 18252, 4, 16427, },
+		{ 4, 18284, 4, 16455, },
+		{ 4, 18220, 4, 16398, },
+	} },
+	{ 5765, {
+		{ 4, 18189, 5, 32740, },
+		{ 4, 18220, 4, 16398, },
+		{ 4, 18157, 5, 32683, },
+	} },
+	{ 5785, {
+		{ 4, 18126, 5, 32626, },
+		{ 4, 18157, 5, 32683, },
+		{ 4, 18094, 5, 32570, },
+	} },
+	{ 5805, {
+		{ 4, 18063, 5, 32514, },
+		{ 4, 18094, 5, 32570, },
+		{ 4, 18032, 5, 32458, },
+	} },
+	{ 5825, {
+		{ 4, 18001, 5, 32402, },
+		{ 4, 18032, 5, 32458, },
+		{ 4, 17970, 5, 32347, },
+	} },
+	{ 5170, {
+		{ 4, 20282, 4, 18254, },
+		{ 4, 20321, 4, 18289, },
+		{ 4, 20243, 4, 18219, },
+	} },
+	{ 5190, {
+		{ 4, 20204, 4, 18183, },
+		{ 4, 20243, 4, 18219, },
+		{ 4, 20165, 4, 18148, },
+	} },
+	{ 5210, {
+		{ 4, 20126, 4, 18114, },
+		{ 4, 20165, 4, 18148, },
+		{ 4, 20088, 4, 18079, },
+	} },
+	{ 5230, {
+		{ 4, 20049, 4, 18044, },
+		{ 4, 20088, 4, 18079, },
+		{ 4, 20011, 4, 18010, },
+	} },
+};
+
+static const struct ar9170_phy_freq_params *
+ar9170_get_hw_dyn_params(struct ieee80211_channel *channel,
+			 enum ar9170_bw bw)
+{
+	unsigned int chanidx = 0;
+	u16 freq = 2412;
+
+	if (channel) {
+		chanidx = channel->hw_value;
+		freq = channel->center_freq;
+	}
+
+	BUG_ON(chanidx >= ARRAY_SIZE(ar9170_phy_freq_params));
+
+	BUILD_BUG_ON(__AR9170_NUM_BW != 3);
+
+	WARN_ON(ar9170_phy_freq_params[chanidx].freq != freq);
+
+	return &ar9170_phy_freq_params[chanidx].params[bw];
+}
+
+
+int ar9170_init_rf(struct ar9170 *ar)
+{
+	const struct ar9170_phy_freq_params *freqpar;
+	__le32 cmd[7];
+	int err;
+
+	err = ar9170_init_rf_banks_0_7(ar, false);
+	if (err)
+		return err;
+
+	err = ar9170_init_rf_bank4_pwr(ar, false, 2412, AR9170_BW_20);
+	if (err)
+		return err;
+
+	freqpar = ar9170_get_hw_dyn_params(NULL, AR9170_BW_20);
+
+	cmd[0] = cpu_to_le32(2412 * 1000);
+	cmd[1] = cpu_to_le32(0);
+	cmd[2] = cpu_to_le32(1);
+	cmd[3] = cpu_to_le32(freqpar->coeff_exp);
+	cmd[4] = cpu_to_le32(freqpar->coeff_man);
+	cmd[5] = cpu_to_le32(freqpar->coeff_exp_shgi);
+	cmd[6] = cpu_to_le32(freqpar->coeff_man_shgi);
+
+	/* RF_INIT echoes the command back to us */
+	err = ar->exec_cmd(ar, AR9170_CMD_RF_INIT,
+			   sizeof(cmd), (u8 *)cmd,
+			   sizeof(cmd), (u8 *)cmd);
+	if (err)
+		return err;
+
+	msleep(1000);
+
+	return ar9170_echo_test(ar, 0xaabbccdd);
+}
+
+static int ar9170_find_freq_idx(int nfreqs, u8 *freqs, u8 f)
+{
+	int idx = nfreqs - 2;
+
+	while (idx >= 0) {
+		if (f >= freqs[idx])
+			return idx;
+		idx--;
+	}
+
+	return 0;
+}
+
+static s32 ar9170_interpolate_s32(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
+{
+	/* nothing to interpolate, it's horizontal */
+	if (y2 == y1)
+		return y1;
+
+	/* check if we hit one of the edges */
+	if (x == x1)
+		return y1;
+	if (x == x2)
+		return y2;
+
+	/* x1 == x2 is bad, hopefully == x */
+	if (x2 == x1)
+		return y1;
+
+	return y1 + (((y2 - y1) * (x - x1)) / (x2 - x1));
+}
+
+static u8 ar9170_interpolate_u8(u8 x, u8 x1, u8 y1, u8 x2, u8 y2)
+{
+#define SHIFT		8
+	s32 y;
+
+	y = ar9170_interpolate_s32(x << SHIFT,
+				   x1 << SHIFT, y1 << SHIFT,
+				   x2 << SHIFT, y2 << SHIFT);
+
+	/*
+	 * XXX: unwrap this expression
+	 *	Isn't it just DIV_ROUND_UP(y, 1<<SHIFT)?
+	 *	Can we rely on the compiler to optimise away the div?
+	 */
+	return (y >> SHIFT) + ((y & (1<<(SHIFT-1))) >> (SHIFT - 1));
+#undef SHIFT
+}
+
+static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
+{
+	struct ar9170_calibration_target_power_legacy *ctpl;
+	struct ar9170_calibration_target_power_ht *ctph;
+	u8 *ctpres;
+	int ntargets;
+	int idx, i, n;
+	u8 ackpower, ackchains, f;
+	u8 pwr_freqs[AR5416_MAX_NUM_TGT_PWRS];
+
+	if (freq < 3000)
+		f = freq - 2300;
+	else
+		f = (freq - 4800)/5;
+
+	/*
+	 * cycle through the various modes
+	 *
+	 * legacy modes first: 5G, 2G CCK, 2G OFDM
+	 */
+	for (i = 0; i < 3; i++) {
+		switch (i) {
+		case 0: /* 5 GHz legacy */
+			ctpl = &ar->eeprom.cal_tgt_pwr_5G[0];
+			ntargets = AR5416_NUM_5G_TARGET_PWRS;
+			ctpres = ar->power_5G_leg;
+			break;
+		case 1: /* 2.4 GHz CCK */
+			ctpl = &ar->eeprom.cal_tgt_pwr_2G_cck[0];
+			ntargets = AR5416_NUM_2G_CCK_TARGET_PWRS;
+			ctpres = ar->power_2G_cck;
+			break;
+		case 2: /* 2.4 GHz OFDM */
+			ctpl = &ar->eeprom.cal_tgt_pwr_2G_ofdm[0];
+			ntargets = AR5416_NUM_2G_OFDM_TARGET_PWRS;
+			ctpres = ar->power_2G_ofdm;
+			break;
+		default:
+			BUG();
+		}
+
+		for (n = 0; n < ntargets; n++) {
+			if (ctpl[n].freq == 0xff)
+				break;
+			pwr_freqs[n] = ctpl[n].freq;
+		}
+		ntargets = n;
+		idx = ar9170_find_freq_idx(ntargets, pwr_freqs, f);
+		for (n = 0; n < 4; n++)
+			ctpres[n] = ar9170_interpolate_u8(
+					f,
+					ctpl[idx + 0].freq,
+					ctpl[idx + 0].power[n],
+					ctpl[idx + 1].freq,
+					ctpl[idx + 1].power[n]);
+	}
+
+	/*
+	 * HT modes now: 5G HT20, 5G HT40, 2G CCK, 2G OFDM, 2G HT20, 2G HT40
+	 */
+	for (i = 0; i < 4; i++) {
+		switch (i) {
+		case 0: /* 5 GHz HT 20 */
+			ctph = &ar->eeprom.cal_tgt_pwr_5G_ht20[0];
+			ntargets = AR5416_NUM_5G_TARGET_PWRS;
+			ctpres = ar->power_5G_ht20;
+			break;
+		case 1: /* 5 GHz HT 40 */
+			ctph = &ar->eeprom.cal_tgt_pwr_5G_ht40[0];
+			ntargets = AR5416_NUM_5G_TARGET_PWRS;
+			ctpres = ar->power_5G_ht40;
+			break;
+		case 2: /* 2.4 GHz HT 20 */
+			ctph = &ar->eeprom.cal_tgt_pwr_2G_ht20[0];
+			ntargets = AR5416_NUM_2G_OFDM_TARGET_PWRS;
+			ctpres = ar->power_2G_ht20;
+			break;
+		case 3: /* 2.4 GHz HT 40 */
+			ctph = &ar->eeprom.cal_tgt_pwr_2G_ht40[0];
+			ntargets = AR5416_NUM_2G_OFDM_TARGET_PWRS;
+			ctpres = ar->power_2G_ht40;
+			break;
+		default:
+			BUG();
+		}
+
+		for (n = 0; n < ntargets; n++) {
+			if (ctph[n].freq == 0xff)
+				break;
+			pwr_freqs[n] = ctph[n].freq;
+		}
+		ntargets = n;
+		idx = ar9170_find_freq_idx(ntargets, pwr_freqs, f);
+		for (n = 0; n < 8; n++)
+			ctpres[n] = ar9170_interpolate_u8(
+					f,
+					ctph[idx + 0].freq,
+					ctph[idx + 0].power[n],
+					ctph[idx + 1].freq,
+					ctph[idx + 1].power[n]);
+	}
+
+	/* set ACK/CTS TX power */
+	ar9170_regwrite_begin(ar);
+
+	if (ar->eeprom.tx_mask != 1)
+		ackchains = AR9170_TX_PHY_TXCHAIN_2;
+	else
+		ackchains = AR9170_TX_PHY_TXCHAIN_1;
+
+	if (freq < 3000)
+		ackpower = ar->power_2G_ofdm[0] & 0x3f;
+	else
+		ackpower = ar->power_5G_leg[0] & 0x3f;
+
+	ar9170_regwrite(0x1c3694, ackpower << 20 | ackchains << 26);
+	ar9170_regwrite(0x1c3bb4, ackpower << 5 | ackchains << 11 |
+				  ackpower << 21 | ackchains << 27);
+
+	ar9170_regwrite_finish();
+	return ar9170_regwrite_result();
+}
+
+static int ar9170_calc_noise_dbm(u32 raw_noise)
+{
+	if (raw_noise & 0x100)
+		return ~((raw_noise & 0x0ff) >> 1);
+	else
+		return (raw_noise & 0xff) >> 1;
+}
+
+int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
+		       enum ar9170_rf_init_mode rfi, enum ar9170_bw bw)
+{
+	const struct ar9170_phy_freq_params *freqpar;
+	u32 cmd, tmp, offs;
+	__le32 vals[8];
+	int i, err;
+	bool bandswitch;
+
+	/* clear BB heavy clip enable */
+	err = ar9170_write_reg(ar, 0x1c59e0, 0x200);
+	if (err)
+		return err;
+
+	/* may be NULL at first setup */
+	if (ar->channel)
+		bandswitch = ar->channel->band != channel->band;
+	else
+		bandswitch = true;
+
+	/* HW workaround */
+	if (!ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] &&
+	    channel->center_freq <= 2417)
+		bandswitch = true;
+
+	err = ar->exec_cmd(ar, AR9170_CMD_FREQ_START, 0, NULL, 0, NULL);
+	if (err)
+		return err;
+
+	if (rfi != AR9170_RFI_NONE || bandswitch) {
+		u32 val = 0x400;
+
+		if (rfi == AR9170_RFI_COLD)
+			val = 0x800;
+
+		/* warm/cold reset BB/ADDA */
+		err = ar9170_write_reg(ar, 0x1d4004, val);
+		if (err)
+			return err;
+
+		err = ar9170_write_reg(ar, 0x1d4004, 0x0);
+		if (err)
+			return err;
+
+		err = ar9170_init_phy(ar, channel->band);
+		if (err)
+			return err;
+
+		err = ar9170_init_rf_banks_0_7(ar,
+			channel->band == IEEE80211_BAND_5GHZ);
+		if (err)
+			return err;
+
+		cmd = AR9170_CMD_RF_INIT;
+	} else {
+		cmd = AR9170_CMD_FREQUENCY;
+	}
+
+	err = ar9170_init_rf_bank4_pwr(ar,
+		channel->band == IEEE80211_BAND_5GHZ,
+		channel->center_freq, bw);
+	if (err)
+		return err;
+
+	switch (bw) {
+	case AR9170_BW_20:
+		tmp = 0x240;
+		offs = 0;
+		break;
+	case AR9170_BW_40_BELOW:
+		tmp = 0x2c4;
+		offs = 3;
+		break;
+	case AR9170_BW_40_ABOVE:
+		tmp = 0x2d4;
+		offs = 1;
+		break;
+	default:
+		BUG();
+		return -ENOSYS;
+	}
+
+	if (0 /* 2 streams capable */)
+		tmp |= 0x100;
+
+	err = ar9170_write_reg(ar, 0x1c5804, tmp);
+	if (err)
+		return err;
+
+	err = ar9170_set_power_cal(ar, channel->center_freq, bw);
+	if (err)
+		return err;
+
+	freqpar = ar9170_get_hw_dyn_params(channel, bw);
+
+	vals[0] = cpu_to_le32(channel->center_freq * 1000);
+	vals[1] = cpu_to_le32(bw == AR9170_BW_20 ? 0 : 1);
+	vals[2] = cpu_to_le32(offs << 2 | 1);
+	vals[3] = cpu_to_le32(freqpar->coeff_exp);
+	vals[4] = cpu_to_le32(freqpar->coeff_man);
+	vals[5] = cpu_to_le32(freqpar->coeff_exp_shgi);
+	vals[6] = cpu_to_le32(freqpar->coeff_man_shgi);
+	vals[7] = cpu_to_le32(1000);
+
+	err = ar->exec_cmd(ar, cmd, sizeof(vals), (u8 *)vals,
+			   sizeof(vals), (u8 *)vals);
+	if (err)
+		return err;
+
+	for (i = 0; i < 2; i++) {
+		ar->noise[i] = ar9170_calc_noise_dbm(
+				(le32_to_cpu(vals[2 + i]) >> 19) & 0x1ff);
+
+		ar->noise[i + 2] = ar9170_calc_noise_dbm(
+				    (le32_to_cpu(vals[5 + i]) >> 23) & 0x1ff);
+	}
+
+	ar->channel = channel;
+	return 0;
+}
diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ar9170/usb.c
new file mode 100644
index 000000000000..ad296840893e
--- /dev/null
+++ b/drivers/net/wireless/ar9170/usb.c
@@ -0,0 +1,748 @@
+/*
+ * Atheros AR9170 driver
+ *
+ * USB - frontend
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2009, Christian Lamparter <chunkeey@web.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *    Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ *    Permission to use, copy, modify, and/or distribute this software for any
+ *    purpose with or without fee is hereby granted, provided that the above
+ *    copyright notice and this permission notice appear in all copies.
+ *
+ *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <net/mac80211.h>
+#include "ar9170.h"
+#include "cmd.h"
+#include "hw.h"
+#include "usb.h"
+
+MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
+MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless");
+MODULE_FIRMWARE("ar9170-1.fw");
+MODULE_FIRMWARE("ar9170-2.fw");
+
+static struct usb_device_id ar9170_usb_ids[] = {
+	/* Atheros 9170 */
+	{ USB_DEVICE(0x0cf3, 0x9170) },
+	/* Atheros TG121N */
+	{ USB_DEVICE(0x0cf3, 0x1001) },
+	/* D-Link DWA 160A */
+	{ USB_DEVICE(0x07d1, 0x3c10) },
+	/* Netgear WNDA3100 */
+	{ USB_DEVICE(0x0846, 0x9010) },
+	/* Netgear WN111 v2 */
+	{ USB_DEVICE(0x0846, 0x9001) },
+	/* Zydas ZD1221 */
+	{ USB_DEVICE(0x0ace, 0x1221) },
+	/* Z-Com UB81 BG */
+	{ USB_DEVICE(0x0cde, 0x0023) },
+	/* Z-Com UB82 ABG */
+	{ USB_DEVICE(0x0cde, 0x0026) },
+	/* Arcadyan WN7512 */
+	{ USB_DEVICE(0x083a, 0xf522) },
+	/* Planex GWUS300 */
+	{ USB_DEVICE(0x2019, 0x5304) },
+	/* IO-Data WNGDNUS2 */
+	{ USB_DEVICE(0x04bb, 0x093f) },
+
+	/* terminate */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, ar9170_usb_ids);
+
+static void ar9170_usb_tx_urb_complete_free(struct urb *urb)
+{
+	struct sk_buff *skb = urb->context;
+	struct ar9170_usb *aru = (struct ar9170_usb *)
+	      usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+
+	if (!aru) {
+		dev_kfree_skb_irq(skb);
+		return ;
+	}
+
+	ar9170_handle_tx_status(&aru->common, skb, false,
+				AR9170_TX_STATUS_COMPLETE);
+}
+
+static void ar9170_usb_tx_urb_complete(struct urb *urb)
+{
+}
+
+static void ar9170_usb_irq_completed(struct urb *urb)
+{
+	struct ar9170_usb *aru = urb->context;
+
+	switch (urb->status) {
+	/* everything is fine */
+	case 0:
+		break;
+
+	/* disconnect */
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ENODEV:
+	case -ESHUTDOWN:
+		goto free;
+
+	default:
+		goto resubmit;
+	}
+
+	print_hex_dump_bytes("ar9170 irq: ", DUMP_PREFIX_OFFSET,
+			     urb->transfer_buffer, urb->actual_length);
+
+resubmit:
+	usb_anchor_urb(urb, &aru->rx_submitted);
+	if (usb_submit_urb(urb, GFP_ATOMIC)) {
+		usb_unanchor_urb(urb);
+		goto free;
+	}
+
+	return;
+
+free:
+	usb_buffer_free(aru->udev, 64, urb->transfer_buffer, urb->transfer_dma);
+}
+
+static void ar9170_usb_rx_completed(struct urb *urb)
+{
+	struct sk_buff *skb = urb->context;
+	struct ar9170_usb *aru = (struct ar9170_usb *)
+		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+	int err;
+
+	if (!aru)
+		goto free;
+
+	switch (urb->status) {
+	/* everything is fine */
+	case 0:
+		break;
+
+	/* disconnect */
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ENODEV:
+	case -ESHUTDOWN:
+		goto free;
+
+	default:
+		goto resubmit;
+	}
+
+	skb_put(skb, urb->actual_length);
+	ar9170_rx(&aru->common, skb);
+
+resubmit:
+	skb_reset_tail_pointer(skb);
+	skb_trim(skb, 0);
+
+	usb_anchor_urb(urb, &aru->rx_submitted);
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err) {
+		usb_unanchor_urb(urb);
+		dev_kfree_skb_irq(skb);
+	}
+
+	return ;
+
+free:
+	dev_kfree_skb_irq(skb);
+	return;
+}
+
+static int ar9170_usb_prep_rx_urb(struct ar9170_usb *aru,
+				  struct urb *urb, gfp_t gfp)
+{
+	struct sk_buff *skb;
+
+	skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE + 32, gfp);
+	if (!skb)
+		return -ENOMEM;
+
+	/* reserve some space for mac80211's radiotap */
+	skb_reserve(skb, 32);
+
+	usb_fill_bulk_urb(urb, aru->udev,
+			  usb_rcvbulkpipe(aru->udev, AR9170_EP_RX),
+			  skb->data, min(skb_tailroom(skb),
+			  AR9170_MAX_RX_BUFFER_SIZE),
+			  ar9170_usb_rx_completed, skb);
+
+	return 0;
+}
+
+static int ar9170_usb_alloc_rx_irq_urb(struct ar9170_usb *aru)
+{
+	struct urb *urb = NULL;
+	void *ibuf;
+	int err = -ENOMEM;
+
+	/* initialize interrupt endpoint */
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		goto out;
+
+	ibuf = usb_buffer_alloc(aru->udev, 64, GFP_KERNEL, &urb->transfer_dma);
+	if (!ibuf)
+		goto out;
+
+	usb_fill_int_urb(urb, aru->udev,
+			 usb_rcvintpipe(aru->udev, AR9170_EP_IRQ), ibuf,
+			 64, ar9170_usb_irq_completed, aru, 1);
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	usb_anchor_urb(urb, &aru->rx_submitted);
+	err = usb_submit_urb(urb, GFP_KERNEL);
+	if (err) {
+		usb_unanchor_urb(urb);
+		usb_buffer_free(aru->udev, 64, urb->transfer_buffer,
+				urb->transfer_dma);
+	}
+
+out:
+	usb_free_urb(urb);
+	return err;
+}
+
+static int ar9170_usb_alloc_rx_bulk_urbs(struct ar9170_usb *aru)
+{
+	struct urb *urb;
+	int i;
+	int err = -EINVAL;
+
+	for (i = 0; i < AR9170_NUM_RX_URBS; i++) {
+		err = -ENOMEM;
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb)
+			goto err_out;
+
+		err = ar9170_usb_prep_rx_urb(aru, urb, GFP_KERNEL);
+		if (err) {
+			usb_free_urb(urb);
+			goto err_out;
+		}
+
+		usb_anchor_urb(urb, &aru->rx_submitted);
+		err = usb_submit_urb(urb, GFP_KERNEL);
+		if (err) {
+			usb_unanchor_urb(urb);
+			dev_kfree_skb_any((void *) urb->transfer_buffer);
+			usb_free_urb(urb);
+			goto err_out;
+		}
+		usb_free_urb(urb);
+	}
+
+	/* the device now waiting for a firmware. */
+	aru->common.state = AR9170_IDLE;
+	return 0;
+
+err_out:
+
+	usb_kill_anchored_urbs(&aru->rx_submitted);
+	return err;
+}
+
+static void ar9170_usb_cancel_urbs(struct ar9170_usb *aru)
+{
+	int ret;
+
+	aru->common.state = AR9170_UNKNOWN_STATE;
+
+	usb_unlink_anchored_urbs(&aru->tx_submitted);
+
+	/* give the LED OFF command and the deauth frame a chance to air. */
+	ret = usb_wait_anchor_empty_timeout(&aru->tx_submitted,
+					    msecs_to_jiffies(100));
+	if (ret == 0)
+		dev_err(&aru->udev->dev, "kill pending tx urbs.\n");
+	usb_poison_anchored_urbs(&aru->tx_submitted);
+
+	usb_poison_anchored_urbs(&aru->rx_submitted);
+}
+
+static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd,
+			       unsigned int plen, void *payload,
+			       unsigned int outlen, void *out)
+{
+	struct ar9170_usb *aru = (void *) ar;
+	struct urb *urb = NULL;
+	unsigned long flags;
+	int err = -ENOMEM;
+
+	if (unlikely(!IS_ACCEPTING_CMD(ar)))
+		return -EPERM;
+
+	if (WARN_ON(plen > AR9170_MAX_CMD_LEN - 4))
+		return -EINVAL;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (unlikely(!urb))
+		goto err_free;
+
+	ar->cmdbuf[0] = cpu_to_le32(plen);
+	ar->cmdbuf[0] |= cpu_to_le32(cmd << 8);
+	/* writing multiple regs fills this buffer already */
+	if (plen && payload != (u8 *)(&ar->cmdbuf[1]))
+		memcpy(&ar->cmdbuf[1], payload, plen);
+
+	spin_lock_irqsave(&aru->common.cmdlock, flags);
+	aru->readbuf = (u8 *)out;
+	aru->readlen = outlen;
+	spin_unlock_irqrestore(&aru->common.cmdlock, flags);
+
+	usb_fill_int_urb(urb, aru->udev,
+			 usb_sndbulkpipe(aru->udev, AR9170_EP_CMD),
+			 aru->common.cmdbuf, plen + 4,
+			 ar9170_usb_tx_urb_complete, NULL, 1);
+
+	usb_anchor_urb(urb, &aru->tx_submitted);
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err) {
+		usb_unanchor_urb(urb);
+		usb_free_urb(urb);
+		goto err_unbuf;
+	}
+	usb_free_urb(urb);
+
+	err = wait_for_completion_timeout(&aru->cmd_wait, HZ);
+	if (err == 0) {
+		err = -ETIMEDOUT;
+		goto err_unbuf;
+	}
+
+	if (outlen >= 0 && aru->readlen != outlen) {
+		err = -EMSGSIZE;
+		goto err_unbuf;
+	}
+
+	return 0;
+
+err_unbuf:
+	/* Maybe the device was removed in the second we were waiting? */
+	if (IS_STARTED(ar)) {
+		dev_err(&aru->udev->dev, "no command feedback "
+					 "received (%d).\n", err);
+
+		/* provide some maybe useful debug information */
+		print_hex_dump_bytes("ar9170 cmd: ", DUMP_PREFIX_NONE,
+				     aru->common.cmdbuf, plen + 4);
+		dump_stack();
+	}
+
+	/* invalidate to avoid completing the next prematurely */
+	spin_lock_irqsave(&aru->common.cmdlock, flags);
+	aru->readbuf = NULL;
+	aru->readlen = 0;
+	spin_unlock_irqrestore(&aru->common.cmdlock, flags);
+
+err_free:
+
+	return err;
+}
+
+static int ar9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb,
+			 bool txstatus_needed, unsigned int extra_len)
+{
+	struct ar9170_usb *aru = (struct ar9170_usb *) ar;
+	struct urb *urb;
+	int err;
+
+	if (unlikely(!IS_STARTED(ar))) {
+		/* Seriously, what were you drink... err... thinking!? */
+		return -EPERM;
+	}
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (unlikely(!urb))
+		return -ENOMEM;
+
+	usb_fill_bulk_urb(urb, aru->udev,
+			  usb_sndbulkpipe(aru->udev, AR9170_EP_TX),
+			  skb->data, skb->len + extra_len, (txstatus_needed ?
+			  ar9170_usb_tx_urb_complete :
+			  ar9170_usb_tx_urb_complete_free), skb);
+	urb->transfer_flags |= URB_ZERO_PACKET;
+
+	usb_anchor_urb(urb, &aru->tx_submitted);
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (unlikely(err))
+		usb_unanchor_urb(urb);
+
+	usb_free_urb(urb);
+	return err;
+}
+
+static void ar9170_usb_callback_cmd(struct ar9170 *ar, u32 len , void *buffer)
+{
+	struct ar9170_usb *aru = (void *) ar;
+	unsigned long flags;
+	u32 in, out;
+
+	if (!buffer)
+		return ;
+
+	in = le32_to_cpup((__le32 *)buffer);
+	out = le32_to_cpu(ar->cmdbuf[0]);
+
+	/* mask off length byte */
+	out &= ~0xFF;
+
+	if (aru->readlen >= 0) {
+		/* add expected length */
+		out |= aru->readlen;
+	} else {
+		/* add obtained length */
+		out |= in & 0xFF;
+	}
+
+	/*
+	 * Some commands (e.g: AR9170_CMD_FREQUENCY) have a variable response
+	 * length and we cannot predict the correct length in advance.
+	 * So we only check if we provided enough space for the data.
+	 */
+	if (unlikely(out < in)) {
+		dev_warn(&aru->udev->dev, "received invalid command response "
+					  "got %d bytes, instead of %d bytes "
+					  "and the resp length is %d bytes\n",
+			 in, out, len);
+		print_hex_dump_bytes("ar9170 invalid resp: ",
+				     DUMP_PREFIX_OFFSET, buffer, len);
+		/*
+		 * Do not complete, then the command times out,
+		 * and we get a stack trace from there.
+		 */
+		return ;
+	}
+
+	spin_lock_irqsave(&aru->common.cmdlock, flags);
+	if (aru->readbuf && len > 0) {
+		memcpy(aru->readbuf, buffer + 4, len - 4);
+		aru->readbuf = NULL;
+	}
+	complete(&aru->cmd_wait);
+	spin_unlock_irqrestore(&aru->common.cmdlock, flags);
+}
+
+static int ar9170_usb_upload(struct ar9170_usb *aru, const void *data,
+			     size_t len, u32 addr, bool complete)
+{
+	int transfer, err;
+	u8 *buf = kmalloc(4096, GFP_KERNEL);
+
+	if (!buf)
+		return -ENOMEM;
+
+	while (len) {
+		transfer = min_t(int, len, 4096);
+		memcpy(buf, data, transfer);
+
+		err = usb_control_msg(aru->udev, usb_sndctrlpipe(aru->udev, 0),
+				      0x30 /* FW DL */, 0x40 | USB_DIR_OUT,
+				      addr >> 8, 0, buf, transfer, 1000);
+
+		if (err < 0) {
+			kfree(buf);
+			return err;
+		}
+
+		len -= transfer;
+		data += transfer;
+		addr += transfer;
+	}
+	kfree(buf);
+
+	if (complete) {
+		err = usb_control_msg(aru->udev, usb_sndctrlpipe(aru->udev, 0),
+				      0x31 /* FW DL COMPLETE */,
+				      0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 5000);
+	}
+
+	return 0;
+}
+
+static int ar9170_usb_request_firmware(struct ar9170_usb *aru)
+{
+	int err = 0;
+
+	err = request_firmware(&aru->init_values, "ar9170-1.fw",
+			       &aru->udev->dev);
+	if (err) {
+		dev_err(&aru->udev->dev, "file with init values not found.\n");
+		return err;
+	}
+
+	err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev);
+	if (err) {
+		release_firmware(aru->init_values);
+		dev_err(&aru->udev->dev, "firmware file not found.\n");
+		return err;
+	}
+
+	return err;
+}
+
+static int ar9170_usb_reset(struct ar9170_usb *aru)
+{
+	int ret, lock = (aru->intf->condition != USB_INTERFACE_BINDING);
+
+	if (lock) {
+		ret = usb_lock_device_for_reset(aru->udev, aru->intf);
+		if (ret < 0) {
+			dev_err(&aru->udev->dev, "unable to lock device "
+				"for reset (%d).\n", ret);
+			return ret;
+		}
+	}
+
+	ret = usb_reset_device(aru->udev);
+	if (lock)
+		usb_unlock_device(aru->udev);
+
+	/* let it rest - for a second - */
+	msleep(1000);
+
+	return ret;
+}
+
+static int ar9170_usb_upload_firmware(struct ar9170_usb *aru)
+{
+	int err;
+
+	/* First, upload initial values to device RAM */
+	err = ar9170_usb_upload(aru, aru->init_values->data,
+				aru->init_values->size, 0x102800, false);
+	if (err) {
+		dev_err(&aru->udev->dev, "firmware part 1 "
+			"upload failed (%d).\n", err);
+		return err;
+	}
+
+	/* Then, upload the firmware itself and start it */
+	return ar9170_usb_upload(aru, aru->firmware->data, aru->firmware->size,
+				0x200000, true);
+}
+
+static int ar9170_usb_init_transport(struct ar9170_usb *aru)
+{
+	struct ar9170 *ar = (void *) &aru->common;
+	int err;
+
+	ar9170_regwrite_begin(ar);
+
+	/* Set USB Rx stream mode MAX packet number to 2 */
+	ar9170_regwrite(AR9170_USB_REG_MAX_AGG_UPLOAD, 0x4);
+
+	/* Set USB Rx stream mode timeout to 10us */
+	ar9170_regwrite(AR9170_USB_REG_UPLOAD_TIME_CTL, 0x80);
+
+	ar9170_regwrite_finish();
+
+	err = ar9170_regwrite_result();
+	if (err)
+		dev_err(&aru->udev->dev, "USB setup failed (%d).\n", err);
+
+	return err;
+}
+
+static void ar9170_usb_stop(struct ar9170 *ar)
+{
+	struct ar9170_usb *aru = (void *) ar;
+	int ret;
+
+	if (IS_ACCEPTING_CMD(ar))
+		aru->common.state = AR9170_STOPPED;
+
+	/* lets wait a while until the tx - queues are dried out */
+	ret = usb_wait_anchor_empty_timeout(&aru->tx_submitted,
+					    msecs_to_jiffies(1000));
+	if (ret == 0)
+		dev_err(&aru->udev->dev, "kill pending tx urbs.\n");
+
+	usb_poison_anchored_urbs(&aru->tx_submitted);
+
+	/*
+	 * Note:
+	 * So far we freed all tx urbs, but we won't dare to touch any rx urbs.
+	 * Else we would end up with a unresponsive device...
+	 */
+}
+
+static int ar9170_usb_open(struct ar9170 *ar)
+{
+	struct ar9170_usb *aru = (void *) ar;
+	int err;
+
+	usb_unpoison_anchored_urbs(&aru->tx_submitted);
+	err = ar9170_usb_init_transport(aru);
+	if (err) {
+		usb_poison_anchored_urbs(&aru->tx_submitted);
+		return err;
+	}
+
+	aru->common.state = AR9170_IDLE;
+	return 0;
+}
+
+static int ar9170_usb_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct ar9170_usb *aru;
+	struct ar9170 *ar;
+	struct usb_device *udev;
+	int err;
+
+	aru = ar9170_alloc(sizeof(*aru));
+	if (IS_ERR(aru)) {
+		err = PTR_ERR(aru);
+		goto out;
+	}
+
+	udev = interface_to_usbdev(intf);
+	usb_get_dev(udev);
+	aru->udev = udev;
+	aru->intf = intf;
+	ar = &aru->common;
+
+	usb_set_intfdata(intf, aru);
+	SET_IEEE80211_DEV(ar->hw, &udev->dev);
+
+	init_usb_anchor(&aru->rx_submitted);
+	init_usb_anchor(&aru->tx_submitted);
+	init_completion(&aru->cmd_wait);
+
+	aru->common.stop = ar9170_usb_stop;
+	aru->common.open = ar9170_usb_open;
+	aru->common.tx = ar9170_usb_tx;
+	aru->common.exec_cmd = ar9170_usb_exec_cmd;
+	aru->common.callback_cmd = ar9170_usb_callback_cmd;
+
+	err = ar9170_usb_reset(aru);
+	if (err)
+		goto err_unlock;
+
+	err = ar9170_usb_request_firmware(aru);
+	if (err)
+		goto err_unlock;
+
+	err = ar9170_usb_alloc_rx_irq_urb(aru);
+	if (err)
+		goto err_freefw;
+
+	err = ar9170_usb_alloc_rx_bulk_urbs(aru);
+	if (err)
+		goto err_unrx;
+
+	err = ar9170_usb_upload_firmware(aru);
+	if (err) {
+		err = ar9170_echo_test(&aru->common, 0x60d43110);
+		if (err) {
+			/* force user invention, by disabling the device */
+			err = usb_driver_set_configuration(aru->udev, -1);
+			dev_err(&aru->udev->dev, "device is in a bad state. "
+						 "please reconnect it!\n");
+			goto err_unrx;
+		}
+	}
+
+	err = ar9170_usb_open(ar);
+	if (err)
+		goto err_unrx;
+
+	err = ar9170_register(ar, &udev->dev);
+
+	ar9170_usb_stop(ar);
+	if (err)
+		goto err_unrx;
+
+	return 0;
+
+err_unrx:
+	ar9170_usb_cancel_urbs(aru);
+
+err_freefw:
+	release_firmware(aru->init_values);
+	release_firmware(aru->firmware);
+
+err_unlock:
+	usb_set_intfdata(intf, NULL);
+	usb_put_dev(udev);
+	ieee80211_free_hw(ar->hw);
+out:
+	return err;
+}
+
+static void ar9170_usb_disconnect(struct usb_interface *intf)
+{
+	struct ar9170_usb *aru = usb_get_intfdata(intf);
+
+	if (!aru)
+		return;
+
+	aru->common.state = AR9170_IDLE;
+	ar9170_unregister(&aru->common);
+	ar9170_usb_cancel_urbs(aru);
+
+	release_firmware(aru->init_values);
+	release_firmware(aru->firmware);
+
+	usb_put_dev(aru->udev);
+	usb_set_intfdata(intf, NULL);
+	ieee80211_free_hw(aru->common.hw);
+}
+
+static struct usb_driver ar9170_driver = {
+	.name = "ar9170usb",
+	.probe = ar9170_usb_probe,
+	.disconnect = ar9170_usb_disconnect,
+	.id_table = ar9170_usb_ids,
+	.soft_unbind = 1,
+};
+
+static int __init ar9170_init(void)
+{
+	return usb_register(&ar9170_driver);
+}
+
+static void __exit ar9170_exit(void)
+{
+	usb_deregister(&ar9170_driver);
+}
+
+module_init(ar9170_init);
+module_exit(ar9170_exit);
diff --git a/drivers/net/wireless/ar9170/usb.h b/drivers/net/wireless/ar9170/usb.h
new file mode 100644
index 000000000000..f5852924cd64
--- /dev/null
+++ b/drivers/net/wireless/ar9170/usb.h
@@ -0,0 +1,74 @@
+/*
+ * Atheros AR9170 USB driver
+ *
+ * Driver specific definitions
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2009, Christian Lamparter <chunkeey@web.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *    Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ *    Permission to use, copy, modify, and/or distribute this software for any
+ *    purpose with or without fee is hereby granted, provided that the above
+ *    copyright notice and this permission notice appear in all copies.
+ *
+ *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef __USB_H
+#define __USB_H
+
+#include <linux/usb.h>
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+#include <linux/leds.h>
+#include <net/wireless.h>
+#include <net/mac80211.h>
+#include <linux/firmware.h>
+#include "eeprom.h"
+#include "hw.h"
+#include "ar9170.h"
+
+#define AR9170_NUM_RX_URBS			16
+
+struct firmware;
+
+struct ar9170_usb {
+	struct ar9170 common;
+	struct usb_device *udev;
+	struct usb_interface *intf;
+
+	struct usb_anchor rx_submitted;
+	struct usb_anchor tx_submitted;
+
+	spinlock_t cmdlock;
+	struct completion cmd_wait;
+	int readlen;
+	u8 *readbuf;
+
+	const struct firmware *init_values;
+	const struct firmware *firmware;
+};
+
+#endif /* __USB_H */
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c
index bfca15da6f0f..5b9f1e06ebf6 100644
--- a/drivers/net/wireless/arlan-main.c
+++ b/drivers/net/wireless/arlan-main.c
@@ -1030,7 +1030,17 @@ static int arlan_mac_addr(struct net_device *dev, void *p)
 	return 0;
 }
 
-
+static const struct net_device_ops arlan_netdev_ops = {
+	.ndo_open		= arlan_open,
+	.ndo_stop		= arlan_close,
+	.ndo_start_xmit		= arlan_tx,
+	.ndo_get_stats		= arlan_statistics,
+	.ndo_set_multicast_list = arlan_set_multicast,
+	.ndo_change_mtu		= arlan_change_mtu,
+	.ndo_set_mac_address	= arlan_mac_addr,
+	.ndo_tx_timeout		= arlan_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+};
 
 static int __init arlan_setup_device(struct net_device *dev, int num)
 {
@@ -1042,14 +1052,7 @@ static int __init arlan_setup_device(struct net_device *dev, int num)
 	ap->conf = (struct arlan_shmem *)(ap+1);
 
 	dev->tx_queue_len = tx_queue_len;
-	dev->open = arlan_open;
-	dev->stop = arlan_close;
-	dev->hard_start_xmit = arlan_tx;
-	dev->get_stats = arlan_statistics;
-	dev->set_multicast_list = arlan_set_multicast;
-	dev->change_mtu = arlan_change_mtu;
-	dev->set_mac_address = arlan_mac_addr;
-	dev->tx_timeout = arlan_tx_timeout;
+	dev->netdev_ops = &arlan_netdev_ops;
 	dev->watchdog_timeo = 3*HZ;
 	
 	ap->irq_test_done = 0;
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h
index 0dc2c7321c8b..0b616e72fe05 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -204,9 +204,9 @@
 #define AR5K_TUNE_CWMAX_11B			1023
 #define AR5K_TUNE_CWMAX_XR			7
 #define AR5K_TUNE_NOISE_FLOOR			-72
-#define AR5K_TUNE_MAX_TXPOWER			60
-#define AR5K_TUNE_DEFAULT_TXPOWER		30
-#define AR5K_TUNE_TPC_TXPOWER			true
+#define AR5K_TUNE_MAX_TXPOWER			63
+#define AR5K_TUNE_DEFAULT_TXPOWER		25
+#define AR5K_TUNE_TPC_TXPOWER			false
 #define AR5K_TUNE_ANT_DIVERSITY			true
 #define AR5K_TUNE_HWTXTRIES			4
 
@@ -551,11 +551,11 @@ enum ath5k_pkt_type {
  */
 #define AR5K_TXPOWER_OFDM(_r, _v)	(			\
 	((0 & 1) << ((_v) + 6)) |				\
-	(((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v))	\
+	(((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v))	\
 )
 
 #define AR5K_TXPOWER_CCK(_r, _v)	(			\
-	(ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v)	\
+	(ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v)	\
 )
 
 /*
@@ -1085,13 +1085,25 @@ struct ath5k_hw {
 	struct ath5k_gain	ah_gain;
 	u8			ah_offset[AR5K_MAX_RF_BANKS];
 
+
 	struct {
-		u16		txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE];
-		u16		txp_rates[AR5K_MAX_RATES];
-		s16		txp_min;
-		s16		txp_max;
+		/* Temporary tables used for interpolation */
+		u8		tmpL[AR5K_EEPROM_N_PD_GAINS]
+					[AR5K_EEPROM_POWER_TABLE_SIZE];
+		u8		tmpR[AR5K_EEPROM_N_PD_GAINS]
+					[AR5K_EEPROM_POWER_TABLE_SIZE];
+		u8		txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2];
+		u16		txp_rates_power_table[AR5K_MAX_RATES];
+		u8		txp_min_idx;
 		bool		txp_tpc;
+		/* Values in 0.25dB units */
+		s16		txp_min_pwr;
+		s16		txp_max_pwr;
+		s16		txp_offset;
 		s16		txp_ofdm;
+		/* Values in dB units */
+		s16		txp_cck_ofdm_pwr_delta;
+		s16		txp_cck_ofdm_gainf_delta;
 	} ah_txpower;
 
 	struct {
@@ -1161,6 +1173,7 @@ extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_l
 
 /* EEPROM access functions */
 extern int ath5k_eeprom_init(struct ath5k_hw *ah);
+extern void ath5k_eeprom_detach(struct ath5k_hw *ah);
 extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
 extern bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah);
 
@@ -1256,8 +1269,8 @@ extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
 extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
 extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
 /* TX power setup */
-extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
-extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
+extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower);
+extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower);
 
 /*
  * Functions used internaly
diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c
index 656cb9dc833b..70d376c63aac 100644
--- a/drivers/net/wireless/ath5k/attach.c
+++ b/drivers/net/wireless/ath5k/attach.c
@@ -341,6 +341,8 @@ void ath5k_hw_detach(struct ath5k_hw *ah)
 	if (ah->ah_rf_banks != NULL)
 		kfree(ah->ah_rf_banks);
 
+	ath5k_eeprom_detach(ah);
+
 	/* assume interrupts are down */
 	kfree(ah);
 }
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index cad3ccf61b00..5d57d774e466 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -685,13 +685,6 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	if (err)
 		return err;
 
-	/*
-	 * Suspend/Resume resets the PCI configuration space, so we have to
-	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
-	 * PCI Tx retries from interfering with C3 CPU state
-	 */
-	pci_write_config_byte(pdev, 0x41, 0);
-
 	err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
 	if (err) {
 		ATH5K_ERR(sc, "request_irq failed\n");
@@ -1095,9 +1088,18 @@ ath5k_mode_setup(struct ath5k_softc *sc)
 static inline int
 ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
 {
-	WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES,
-			"hw_rix out of bounds: %x\n", hw_rix);
-	return sc->rate_idx[sc->curband->band][hw_rix];
+	int rix;
+
+	/* return base rate on errors */
+	if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES,
+			"hw_rix out of bounds: %x\n", hw_rix))
+		return 0;
+
+	rix = sc->rate_idx[sc->curband->band][hw_rix];
+	if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix))
+		rix = 0;
+
+	return rix;
 }
 
 /***************\
@@ -1216,6 +1218,9 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
 	pktlen = skb->len;
 
+	/* FIXME: If we are in g mode and rate is a CCK rate
+	 * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
+	 * from tx power (value is in dB units already) */
 	if (info->control.hw_key) {
 		keyidx = info->control.hw_key->hw_key_idx;
 		pktlen += info->control.hw_key->icv_len;
@@ -2044,6 +2049,9 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 			antenna = sc->bsent & 4 ? 2 : 1;
 	}
 
+	/* FIXME: If we are in g mode and rate is a CCK rate
+	 * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
+	 * from tx power (value is in dB units already) */
 	ds->ds_data = bf->skbaddr;
 	ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
 			ieee80211_get_hdrlen_from_skb(skb),
@@ -2305,7 +2313,7 @@ ath5k_init(struct ath5k_softc *sc)
 	sc->curband = &sc->sbands[sc->curchan->band];
 	sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
 		AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
-		AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
+		AR5K_INT_FATAL | AR5K_INT_GLOBAL;
 	ret = ath5k_reset(sc, false, false);
 	if (ret)
 		goto done;
@@ -2554,7 +2562,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		if (skb_headroom(skb) < padsize) {
 			ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
 				  " headroom to pad %d\n", hdrlen, padsize);
-			return NETDEV_TX_BUSY;
+			goto drop_packet;
 		}
 		skb_push(skb, padsize);
 		memmove(skb->data, skb->data+padsize, hdrlen);
@@ -2565,7 +2573,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
 		spin_unlock_irqrestore(&sc->txbuflock, flags);
 		ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
-		return NETDEV_TX_BUSY;
+		goto drop_packet;
 	}
 	bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
 	list_del(&bf->list);
@@ -2582,10 +2590,12 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		list_add_tail(&bf->list, &sc->txbuf);
 		sc->txbuf_len++;
 		spin_unlock_irqrestore(&sc->txbuflock, flags);
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
+		goto drop_packet;
 	}
+	return NETDEV_TX_OK;
 
+drop_packet:
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
@@ -2608,12 +2618,6 @@ ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
 		goto err;
 	}
 
-	/*
-	 * This is needed only to setup initial state
-	 * but it's best done after a reset.
-	 */
-	ath5k_hw_set_txpower_limit(sc->ah, 0);
-
 	ret = ath5k_rx_start(sc);
 	if (ret) {
 		ATH5K_ERR(sc, "can't start recv logic\n");
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index 20e0d14b41ec..822956114cd7 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -112,7 +112,7 @@ struct ath5k_softc {
 	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
 	struct ieee80211_channel channels[ATH_CHAN_MAX];
 	struct ieee80211_rate	rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
-	u8			rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
+	s8			rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
 	enum nl80211_iftype	opmode;
 	struct ath5k_hw		*ah;		/* Atheros HW */
 
diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c
index b40a9287a39a..dc30a2b70a6b 100644
--- a/drivers/net/wireless/ath5k/desc.c
+++ b/drivers/net/wireless/ath5k/desc.c
@@ -194,6 +194,10 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
 		return -EINVAL;
 	}
 
+	tx_power += ah->ah_txpower.txp_offset;
+	if (tx_power > AR5K_TUNE_MAX_TXPOWER)
+		tx_power = AR5K_TUNE_MAX_TXPOWER;
+
 	/* Clear descriptor */
 	memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc));
 
diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath5k/eeprom.c
index ac45ca47ca87..c0fb3b09ba45 100644
--- a/drivers/net/wireless/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath5k/eeprom.c
@@ -1,7 +1,7 @@
 /*
  * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -98,11 +98,6 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah)
 	int ret;
 	u16 val;
 
-	/* Initial TX thermal adjustment values */
-	ee->ee_tx_clip = 4;
-	ee->ee_pwd_84 = ee->ee_pwd_90 = 1;
-	ee->ee_gain_select = 1;
-
 	/*
 	 * Read values from EEPROM and store them in the capability structure
 	 */
@@ -241,22 +236,22 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
 	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
 	switch(mode) {
 	case AR5K_EEPROM_MODE_11A:
-		ee->ee_ob[mode][3]		= (val >> 5) & 0x7;
-		ee->ee_db[mode][3]		= (val >> 2) & 0x7;
-		ee->ee_ob[mode][2]		= (val << 1) & 0x7;
+		ee->ee_ob[mode][3]	= (val >> 5) & 0x7;
+		ee->ee_db[mode][3]	= (val >> 2) & 0x7;
+		ee->ee_ob[mode][2]	= (val << 1) & 0x7;
 
 		AR5K_EEPROM_READ(o++, val);
-		ee->ee_ob[mode][2]		|= (val >> 15) & 0x1;
-		ee->ee_db[mode][2]		= (val >> 12) & 0x7;
-		ee->ee_ob[mode][1]		= (val >> 9) & 0x7;
-		ee->ee_db[mode][1]		= (val >> 6) & 0x7;
-		ee->ee_ob[mode][0]		= (val >> 3) & 0x7;
-		ee->ee_db[mode][0]		= val & 0x7;
+		ee->ee_ob[mode][2]	|= (val >> 15) & 0x1;
+		ee->ee_db[mode][2]	= (val >> 12) & 0x7;
+		ee->ee_ob[mode][1]	= (val >> 9) & 0x7;
+		ee->ee_db[mode][1]	= (val >> 6) & 0x7;
+		ee->ee_ob[mode][0]	= (val >> 3) & 0x7;
+		ee->ee_db[mode][0]	= val & 0x7;
 		break;
 	case AR5K_EEPROM_MODE_11G:
 	case AR5K_EEPROM_MODE_11B:
-		ee->ee_ob[mode][1]		= (val >> 4) & 0x7;
-		ee->ee_db[mode][1]		= val & 0x7;
+		ee->ee_ob[mode][1]	= (val >> 4) & 0x7;
+		ee->ee_db[mode][1]	= val & 0x7;
 		break;
 	}
 
@@ -504,35 +499,6 @@ ath5k_eeprom_init_modes(struct ath5k_hw *ah)
 	return 0;
 }
 
-/* Used to match PCDAC steps with power values on RF5111 chips
- * (eeprom versions < 4). For RF5111 we have 10 pre-defined PCDAC
- * steps that match with the power values we read from eeprom. On
- * older eeprom versions (< 3.2) these steps are equaly spaced at
- * 10% of the pcdac curve -until the curve reaches it's maximum-
- * (10 steps from 0 to 100%) but on newer eeprom versions (>= 3.2)
- * these 10 steps are spaced in a different way. This function returns
- * the pcdac steps based on eeprom version and curve min/max so that we
- * can have  pcdac/pwr points.
- */
-static inline void
-ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp)
-{
-	static const u16 intercepts3[] =
-		{ 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 };
-	static const u16 intercepts3_2[] =
-		{ 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 };
-	const u16 *ip;
-	int i;
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2)
-		ip = intercepts3_2;
-	else
-		ip = intercepts3;
-
-	for (i = 0; i < ARRAY_SIZE(intercepts3); i++)
-		*vp++ = (ip[i] * max + (100 - ip[i]) * min) / 100;
-}
-
 /* Read the frequency piers for each mode (mostly used on newer eeproms with 0xff
  * frequency mask) */
 static inline int
@@ -546,26 +512,25 @@ ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max,
 	int ret;
 	u16 val;
 
+	ee->ee_n_piers[mode] = 0;
 	while(i < max) {
 		AR5K_EEPROM_READ(o++, val);
 
-		freq1 = (val >> 8) & 0xff;
-		freq2 = val & 0xff;
-
-		if (freq1) {
-			pc[i++].freq = ath5k_eeprom_bin2freq(ee,
-					freq1, mode);
-			ee->ee_n_piers[mode]++;
-		}
+		freq1 = val & 0xff;
+		if (!freq1)
+			break;
 
-		if (freq2) {
-			pc[i++].freq = ath5k_eeprom_bin2freq(ee,
-					freq2, mode);
-			ee->ee_n_piers[mode]++;
-		}
+		pc[i++].freq = ath5k_eeprom_bin2freq(ee,
+				freq1, mode);
+		ee->ee_n_piers[mode]++;
 
-		if (!freq1 || !freq2)
+		freq2 = (val >> 8) & 0xff;
+		if (!freq2)
 			break;
+
+		pc[i++].freq = ath5k_eeprom_bin2freq(ee,
+				freq2, mode);
+		ee->ee_n_piers[mode]++;
 	}
 
 	/* return new offset */
@@ -652,13 +617,122 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset)
 	return 0;
 }
 
-/* Read power calibration for RF5111 chips
+/*
+ * Read power calibration for RF5111 chips
+ *
  * For RF5111 we have an XPD -eXternal Power Detector- curve
- * for each calibrated channel. Each curve has PCDAC steps on
- * x axis and power on y axis and looks like a logarithmic
- * function. To recreate the curve and pass the power values
- * on the pcdac table, we read 10 points here and interpolate later.
+ * for each calibrated channel. Each curve has 0,5dB Power steps
+ * on x axis and PCDAC steps (offsets) on y axis and looks like an
+ * exponential function. To recreate the curve we read 11 points
+ * here and interpolate later.
  */
+
+/* Used to match PCDAC steps with power values on RF5111 chips
+ * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC
+ * steps that match with the power values we read from eeprom. On
+ * older eeprom versions (< 3.2) these steps are equaly spaced at
+ * 10% of the pcdac curve -until the curve reaches it's maximum-
+ * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2)
+ * these 11 steps are spaced in a different way. This function returns
+ * the pcdac steps based on eeprom version and curve min/max so that we
+ * can have pcdac/pwr points.
+ */
+static inline void
+ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp)
+{
+	const static u16 intercepts3[] =
+		{ 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 };
+	const static u16 intercepts3_2[] =
+		{ 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 };
+	const u16 *ip;
+	int i;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2)
+		ip = intercepts3_2;
+	else
+		ip = intercepts3;
+
+	for (i = 0; i < ARRAY_SIZE(intercepts3); i++)
+		vp[i] = (ip[i] * max + (100 - ip[i]) * min) / 100;
+}
+
+/* Convert RF5111 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode,
+				struct ath5k_chan_pcal_info *chinfo)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info_rf5111 *pcinfo;
+	struct ath5k_pdgain_info *pd;
+	u8 pier, point, idx;
+	u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+
+	/* Fill raw data for each calibration pier */
+	for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+		pcinfo = &chinfo[pier].rf5111_info;
+
+		/* Allocate pd_curves for this cal pier */
+		chinfo[pier].pd_curves =
+			kcalloc(AR5K_EEPROM_N_PD_CURVES,
+				sizeof(struct ath5k_pdgain_info),
+				GFP_KERNEL);
+
+		if (!chinfo[pier].pd_curves)
+			return -ENOMEM;
+
+		/* Only one curve for RF5111
+		 * find out which one and place
+		 * in in pd_curves.
+		 * Note: ee_x_gain is reversed here */
+		for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) {
+
+			if (!((ee->ee_x_gain[mode] >> idx) & 0x1)) {
+				pdgain_idx[0] = idx;
+				break;
+			}
+		}
+
+		ee->ee_pd_gains[mode] = 1;
+
+		pd = &chinfo[pier].pd_curves[idx];
+
+		pd->pd_points = AR5K_EEPROM_N_PWR_POINTS_5111;
+
+		/* Allocate pd points for this curve */
+		pd->pd_step = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111,
+					sizeof(u8), GFP_KERNEL);
+		if (!pd->pd_step)
+			return -ENOMEM;
+
+		pd->pd_pwr = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111,
+					sizeof(s16), GFP_KERNEL);
+		if (!pd->pd_pwr)
+			return -ENOMEM;
+
+		/* Fill raw dataset
+		 * (convert power to 0.25dB units
+		 * for RF5112 combatibility) */
+		for (point = 0; point < pd->pd_points; point++) {
+
+			/* Absolute values */
+			pd->pd_pwr[point] = 2 * pcinfo->pwr[point];
+
+			/* Already sorted */
+			pd->pd_step[point] = pcinfo->pcdac[point];
+		}
+
+		/* Set min/max pwr */
+		chinfo[pier].min_pwr = pd->pd_pwr[0];
+		chinfo[pier].max_pwr = pd->pd_pwr[10];
+
+	}
+
+	return 0;
+}
+
+/* Parse EEPROM data */
 static int
 ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode)
 {
@@ -747,30 +821,165 @@ ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode)
 			cdata->pcdac_max, cdata->pcdac);
 	}
 
-	return 0;
+	return ath5k_eeprom_convert_pcal_info_5111(ah, mode, pcal);
 }
 
-/* Read power calibration for RF5112 chips
+
+/*
+ * Read power calibration for RF5112 chips
+ *
  * For RF5112 we have 4 XPD -eXternal Power Detector- curves
  * for each calibrated channel on 0, -6, -12 and -18dbm but we only
- * use the higher (3) and the lower (0) curves. Each curve has PCDAC
- * steps on x axis and power on y axis and looks like a linear
- * function. To recreate the curve and pass the power values
- * on the pcdac table, we read 4 points for xpd 0 and 3 points
- * for xpd 3 here and interpolate later.
+ * use the higher (3) and the lower (0) curves. Each curve has 0.5dB
+ * power steps on x axis and PCDAC steps on y axis and looks like a
+ * linear function. To recreate the curve and pass the power values
+ * on hw, we read 4 points for xpd 0 (lower gain -> max power)
+ * and 3 points for xpd 3 (higher gain -> lower power) here and
+ * interpolate later.
  *
  * Note: Many vendors just use xpd 0 so xpd 3 is zeroed.
  */
+
+/* Convert RF5112 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode,
+				struct ath5k_chan_pcal_info *chinfo)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info_rf5112 *pcinfo;
+	u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+	unsigned int pier, pdg, point;
+
+	/* Fill raw data for each calibration pier */
+	for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+		pcinfo = &chinfo[pier].rf5112_info;
+
+		/* Allocate pd_curves for this cal pier */
+		chinfo[pier].pd_curves =
+				kcalloc(AR5K_EEPROM_N_PD_CURVES,
+					sizeof(struct ath5k_pdgain_info),
+					GFP_KERNEL);
+
+		if (!chinfo[pier].pd_curves)
+			return -ENOMEM;
+
+		/* Fill pd_curves */
+		for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+
+			u8 idx = pdgain_idx[pdg];
+			struct ath5k_pdgain_info *pd =
+					&chinfo[pier].pd_curves[idx];
+
+			/* Lowest gain curve (max power) */
+			if (pdg == 0) {
+				/* One more point for better accuracy */
+				pd->pd_points = AR5K_EEPROM_N_XPD0_POINTS;
+
+				/* Allocate pd points for this curve */
+				pd->pd_step = kcalloc(pd->pd_points,
+						sizeof(u8), GFP_KERNEL);
+
+				if (!pd->pd_step)
+					return -ENOMEM;
+
+				pd->pd_pwr = kcalloc(pd->pd_points,
+						sizeof(s16), GFP_KERNEL);
+
+				if (!pd->pd_pwr)
+					return -ENOMEM;
+
+
+				/* Fill raw dataset
+				 * (all power levels are in 0.25dB units) */
+				pd->pd_step[0] = pcinfo->pcdac_x0[0];
+				pd->pd_pwr[0] = pcinfo->pwr_x0[0];
+
+				for (point = 1; point < pd->pd_points;
+				point++) {
+					/* Absolute values */
+					pd->pd_pwr[point] =
+						pcinfo->pwr_x0[point];
+
+					/* Deltas */
+					pd->pd_step[point] =
+						pd->pd_step[point - 1] +
+						pcinfo->pcdac_x0[point];
+				}
+
+				/* Set min power for this frequency */
+				chinfo[pier].min_pwr = pd->pd_pwr[0];
+
+			/* Highest gain curve (min power) */
+			} else if (pdg == 1) {
+
+				pd->pd_points = AR5K_EEPROM_N_XPD3_POINTS;
+
+				/* Allocate pd points for this curve */
+				pd->pd_step = kcalloc(pd->pd_points,
+						sizeof(u8), GFP_KERNEL);
+
+				if (!pd->pd_step)
+					return -ENOMEM;
+
+				pd->pd_pwr = kcalloc(pd->pd_points,
+						sizeof(s16), GFP_KERNEL);
+
+				if (!pd->pd_pwr)
+					return -ENOMEM;
+
+				/* Fill raw dataset
+				 * (all power levels are in 0.25dB units) */
+				for (point = 0; point < pd->pd_points;
+				point++) {
+					/* Absolute values */
+					pd->pd_pwr[point] =
+						pcinfo->pwr_x3[point];
+
+					/* Fixed points */
+					pd->pd_step[point] =
+						pcinfo->pcdac_x3[point];
+				}
+
+				/* Since we have a higher gain curve
+				 * override min power */
+				chinfo[pier].min_pwr = pd->pd_pwr[0];
+			}
+		}
+	}
+
+	return 0;
+}
+
+/* Parse EEPROM data */
 static int
 ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
 {
 	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
 	struct ath5k_chan_pcal_info_rf5112 *chan_pcal_info;
 	struct ath5k_chan_pcal_info *gen_chan_info;
+	u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
 	u32 offset;
-	unsigned int i, c;
+	u8 i, c;
 	u16 val;
 	int ret;
+	u8 pd_gains = 0;
+
+	/* Count how many curves we have and
+	 * identify them (which one of the 4
+	 * available curves we have on each count).
+	 * Curves are stored from lower (x0) to
+	 * higher (x3) gain */
+	for (i = 0; i < AR5K_EEPROM_N_PD_CURVES; i++) {
+		/* ee_x_gain[mode] is x gain mask */
+		if ((ee->ee_x_gain[mode] >> i) & 0x1)
+			pdgain_idx[pd_gains++] = i;
+	}
+	ee->ee_pd_gains[mode] = pd_gains;
+
+	if (pd_gains == 0 || pd_gains > 2)
+		return -EINVAL;
 
 	switch (mode) {
 	case AR5K_EEPROM_MODE_11A:
@@ -808,13 +1017,13 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
 	for (i = 0; i < ee->ee_n_piers[mode]; i++) {
 		chan_pcal_info = &gen_chan_info[i].rf5112_info;
 
-		/* Power values in dBm * 4
+		/* Power values in quarter dB
 		 * for the lower xpd gain curve
 		 * (0 dBm -> higher output power) */
 		for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) {
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pwr_x0[c] = (val & 0xff);
-			chan_pcal_info->pwr_x0[++c] = ((val >> 8) & 0xff);
+			chan_pcal_info->pwr_x0[c] = (s8) (val & 0xff);
+			chan_pcal_info->pwr_x0[++c] = (s8) ((val >> 8) & 0xff);
 		}
 
 		/* PCDAC steps
@@ -825,12 +1034,12 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
 		chan_pcal_info->pcdac_x0[2] = ((val >> 5) & 0x1f);
 		chan_pcal_info->pcdac_x0[3] = ((val >> 10) & 0x1f);
 
-		/* Power values in dBm * 4
+		/* Power values in quarter dB
 		 * for the higher xpd gain curve
 		 * (18 dBm -> lower output power) */
 		AR5K_EEPROM_READ(offset++, val);
-		chan_pcal_info->pwr_x3[0] = (val & 0xff);
-		chan_pcal_info->pwr_x3[1] = ((val >> 8) & 0xff);
+		chan_pcal_info->pwr_x3[0] = (s8) (val & 0xff);
+		chan_pcal_info->pwr_x3[1] = (s8) ((val >> 8) & 0xff);
 
 		AR5K_EEPROM_READ(offset++, val);
 		chan_pcal_info->pwr_x3[2] = (val & 0xff);
@@ -843,24 +1052,36 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
 		chan_pcal_info->pcdac_x3[2] = 63;
 
 		if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) {
-			chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0xff);
+			chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0x3f);
 
 			/* Last xpd0 power level is also channel maximum */
 			gen_chan_info[i].max_pwr = chan_pcal_info->pwr_x0[3];
 		} else {
 			chan_pcal_info->pcdac_x0[0] = 1;
-			gen_chan_info[i].max_pwr = ((val >> 8) & 0xff);
+			gen_chan_info[i].max_pwr = (s8) ((val >> 8) & 0xff);
 		}
 
-		/* Recreate pcdac_x0 table for this channel using pcdac steps */
-		chan_pcal_info->pcdac_x0[1] += chan_pcal_info->pcdac_x0[0];
-		chan_pcal_info->pcdac_x0[2] += chan_pcal_info->pcdac_x0[1];
-		chan_pcal_info->pcdac_x0[3] += chan_pcal_info->pcdac_x0[2];
 	}
 
-	return 0;
+	return ath5k_eeprom_convert_pcal_info_5112(ah, mode, gen_chan_info);
 }
 
+
+/*
+ * Read power calibration for RF2413 chips
+ *
+ * For RF2413 we have a Power to PDDAC table (Power Detector)
+ * instead of a PCDAC and 4 pd gain curves for each calibrated channel.
+ * Each curve has power on x axis in 0.5 db steps and PDDADC steps on y
+ * axis and looks like an exponential function like the RF5111 curve.
+ *
+ * To recreate the curves we read here the points and interpolate
+ * later. Note that in most cases only 2 (higher and lower) curves are
+ * used (like RF5112) but vendors have the oportunity to include all
+ * 4 curves on eeprom. The final curve (higher power) has an extra
+ * point for better accuracy like RF5112.
+ */
+
 /* For RF2413 power calibration data doesn't start on a fixed location and
  * if a mode is not supported, it's section is missing -not zeroed-.
  * So we need to calculate the starting offset for each section by using
@@ -890,13 +1111,15 @@ ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode)
 	switch(mode) {
 	case AR5K_EEPROM_MODE_11G:
 		if (AR5K_EEPROM_HDR_11B(ee->ee_header))
-			offset += ath5k_pdgains_size_2413(ee, AR5K_EEPROM_MODE_11B) +
-							AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
+			offset += ath5k_pdgains_size_2413(ee,
+					AR5K_EEPROM_MODE_11B) +
+					AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
 		/* fall through */
 	case AR5K_EEPROM_MODE_11B:
 		if (AR5K_EEPROM_HDR_11A(ee->ee_header))
-			offset += ath5k_pdgains_size_2413(ee, AR5K_EEPROM_MODE_11A) +
-							AR5K_EEPROM_N_5GHZ_CHAN / 2;
+			offset += ath5k_pdgains_size_2413(ee,
+					AR5K_EEPROM_MODE_11A) +
+					AR5K_EEPROM_N_5GHZ_CHAN / 2;
 		/* fall through */
 	case AR5K_EEPROM_MODE_11A:
 		break;
@@ -907,37 +1130,118 @@ ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode)
 	return offset;
 }
 
-/* Read power calibration for RF2413 chips
- * For RF2413 we have a PDDAC table (Power Detector) instead
- * of a PCDAC and 4 pd gain curves for each calibrated channel.
- * Each curve has PDDAC steps on x axis and power on y axis and
- * looks like an exponential function. To recreate the curves
- * we read here the points and interpolate later. Note that
- * in most cases only higher and lower curves are used (like
- * RF5112) but vendors have the oportunity to include all 4
- * curves on eeprom. The final curve (higher power) has an extra
- * point for better accuracy like RF5112.
- */
+/* Convert RF2413 specific data to generic raw data
+ * used by interpolation code */
+static int
+ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode,
+				struct ath5k_chan_pcal_info *chinfo)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info_rf2413 *pcinfo;
+	u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
+	unsigned int pier, pdg, point;
+
+	/* Fill raw data for each calibration pier */
+	for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+
+		pcinfo = &chinfo[pier].rf2413_info;
+
+		/* Allocate pd_curves for this cal pier */
+		chinfo[pier].pd_curves =
+				kcalloc(AR5K_EEPROM_N_PD_CURVES,
+					sizeof(struct ath5k_pdgain_info),
+					GFP_KERNEL);
+
+		if (!chinfo[pier].pd_curves)
+			return -ENOMEM;
+
+		/* Fill pd_curves */
+		for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+
+			u8 idx = pdgain_idx[pdg];
+			struct ath5k_pdgain_info *pd =
+					&chinfo[pier].pd_curves[idx];
+
+			/* One more point for the highest power
+			 * curve (lowest gain) */
+			if (pdg == ee->ee_pd_gains[mode] - 1)
+				pd->pd_points = AR5K_EEPROM_N_PD_POINTS;
+			else
+				pd->pd_points = AR5K_EEPROM_N_PD_POINTS - 1;
+
+			/* Allocate pd points for this curve */
+			pd->pd_step = kcalloc(pd->pd_points,
+					sizeof(u8), GFP_KERNEL);
+
+			if (!pd->pd_step)
+				return -ENOMEM;
+
+			pd->pd_pwr = kcalloc(pd->pd_points,
+					sizeof(s16), GFP_KERNEL);
+
+			if (!pd->pd_pwr)
+				return -ENOMEM;
+
+			/* Fill raw dataset
+			 * convert all pwr levels to
+			 * quarter dB for RF5112 combatibility */
+			pd->pd_step[0] = pcinfo->pddac_i[pdg];
+			pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg];
+
+			for (point = 1; point < pd->pd_points; point++) {
+
+				pd->pd_pwr[point] = pd->pd_pwr[point - 1] +
+					2 * pcinfo->pwr[pdg][point - 1];
+
+				pd->pd_step[point] = pd->pd_step[point - 1] +
+						pcinfo->pddac[pdg][point - 1];
+
+			}
+
+			/* Highest gain curve -> min power */
+			if (pdg == 0)
+				chinfo[pier].min_pwr = pd->pd_pwr[0];
+
+			/* Lowest gain curve -> max power */
+			if (pdg == ee->ee_pd_gains[mode] - 1)
+				chinfo[pier].max_pwr =
+					pd->pd_pwr[pd->pd_points - 1];
+		}
+	}
+
+	return 0;
+}
+
+/* Parse EEPROM data */
 static int
 ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
 {
 	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	struct ath5k_chan_pcal_info_rf2413 *chan_pcal_info;
-	struct ath5k_chan_pcal_info *gen_chan_info;
-	unsigned int i, c;
+	struct ath5k_chan_pcal_info_rf2413 *pcinfo;
+	struct ath5k_chan_pcal_info *chinfo;
+	u8 *pdgain_idx = ee->ee_pdc_to_idx[mode];
 	u32 offset;
-	int ret;
+	int idx, i, ret;
 	u16 val;
 	u8 pd_gains = 0;
 
-	if (ee->ee_x_gain[mode] & 0x1) pd_gains++;
-	if ((ee->ee_x_gain[mode] >> 1) & 0x1) pd_gains++;
-	if ((ee->ee_x_gain[mode] >> 2) & 0x1) pd_gains++;
-	if ((ee->ee_x_gain[mode] >> 3) & 0x1) pd_gains++;
+	/* Count how many curves we have and
+	 * identify them (which one of the 4
+	 * available curves we have on each count).
+	 * Curves are stored from higher to
+	 * lower gain so we go backwards */
+	for (idx = AR5K_EEPROM_N_PD_CURVES - 1; idx >= 0; idx--) {
+		/* ee_x_gain[mode] is x gain mask */
+		if ((ee->ee_x_gain[mode] >> idx) & 0x1)
+			pdgain_idx[pd_gains++] = idx;
+
+	}
 	ee->ee_pd_gains[mode] = pd_gains;
 
+	if (pd_gains == 0)
+		return -EINVAL;
+
 	offset = ath5k_cal_data_offset_2413(ee, mode);
-	ee->ee_n_piers[mode] = 0;
 	switch (mode) {
 	case AR5K_EEPROM_MODE_11A:
 		if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
@@ -945,7 +1249,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
 
 		ath5k_eeprom_init_11a_pcal_freq(ah, offset);
 		offset += AR5K_EEPROM_N_5GHZ_CHAN / 2;
-		gen_chan_info = ee->ee_pwr_cal_a;
+		chinfo = ee->ee_pwr_cal_a;
 		break;
 	case AR5K_EEPROM_MODE_11B:
 		if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
@@ -953,7 +1257,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
 
 		ath5k_eeprom_init_11bg_2413(ah, mode, offset);
 		offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
-		gen_chan_info = ee->ee_pwr_cal_b;
+		chinfo = ee->ee_pwr_cal_b;
 		break;
 	case AR5K_EEPROM_MODE_11G:
 		if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
@@ -961,41 +1265,35 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
 
 		ath5k_eeprom_init_11bg_2413(ah, mode, offset);
 		offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
-		gen_chan_info = ee->ee_pwr_cal_g;
+		chinfo = ee->ee_pwr_cal_g;
 		break;
 	default:
 		return -EINVAL;
 	}
 
-	if (pd_gains == 0)
-		return 0;
-
 	for (i = 0; i < ee->ee_n_piers[mode]; i++) {
-		chan_pcal_info = &gen_chan_info[i].rf2413_info;
+		pcinfo = &chinfo[i].rf2413_info;
 
 		/*
 		 * Read pwr_i, pddac_i and the first
 		 * 2 pd points (pwr, pddac)
 		 */
 		AR5K_EEPROM_READ(offset++, val);
-		chan_pcal_info->pwr_i[0] = val & 0x1f;
-		chan_pcal_info->pddac_i[0] = (val >> 5) & 0x7f;
-		chan_pcal_info->pwr[0][0] =
-					(val >> 12) & 0xf;
+		pcinfo->pwr_i[0] = val & 0x1f;
+		pcinfo->pddac_i[0] = (val >> 5) & 0x7f;
+		pcinfo->pwr[0][0] = (val >> 12) & 0xf;
 
 		AR5K_EEPROM_READ(offset++, val);
-		chan_pcal_info->pddac[0][0] = val & 0x3f;
-		chan_pcal_info->pwr[0][1] = (val >> 6) & 0xf;
-		chan_pcal_info->pddac[0][1] =
-					(val >> 10) & 0x3f;
+		pcinfo->pddac[0][0] = val & 0x3f;
+		pcinfo->pwr[0][1] = (val >> 6) & 0xf;
+		pcinfo->pddac[0][1] = (val >> 10) & 0x3f;
 
 		AR5K_EEPROM_READ(offset++, val);
-		chan_pcal_info->pwr[0][2] = val & 0xf;
-		chan_pcal_info->pddac[0][2] =
-					(val >> 4) & 0x3f;
+		pcinfo->pwr[0][2] = val & 0xf;
+		pcinfo->pddac[0][2] = (val >> 4) & 0x3f;
 
-		chan_pcal_info->pwr[0][3] = 0;
-		chan_pcal_info->pddac[0][3] = 0;
+		pcinfo->pwr[0][3] = 0;
+		pcinfo->pddac[0][3] = 0;
 
 		if (pd_gains > 1) {
 			/*
@@ -1003,44 +1301,36 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
 			 * so it only has 2 pd points.
 			 * Continue wih pd gain 1.
 			 */
-			chan_pcal_info->pwr_i[1] = (val >> 10) & 0x1f;
+			pcinfo->pwr_i[1] = (val >> 10) & 0x1f;
 
-			chan_pcal_info->pddac_i[1] = (val >> 15) & 0x1;
+			pcinfo->pddac_i[1] = (val >> 15) & 0x1;
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pddac_i[1] |= (val & 0x3F) << 1;
+			pcinfo->pddac_i[1] |= (val & 0x3F) << 1;
 
-			chan_pcal_info->pwr[1][0] = (val >> 6) & 0xf;
-			chan_pcal_info->pddac[1][0] =
-						(val >> 10) & 0x3f;
+			pcinfo->pwr[1][0] = (val >> 6) & 0xf;
+			pcinfo->pddac[1][0] = (val >> 10) & 0x3f;
 
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pwr[1][1] = val & 0xf;
-			chan_pcal_info->pddac[1][1] =
-						(val >> 4) & 0x3f;
-			chan_pcal_info->pwr[1][2] =
-						(val >> 10) & 0xf;
-
-			chan_pcal_info->pddac[1][2] =
-						(val >> 14) & 0x3;
+			pcinfo->pwr[1][1] = val & 0xf;
+			pcinfo->pddac[1][1] = (val >> 4) & 0x3f;
+			pcinfo->pwr[1][2] = (val >> 10) & 0xf;
+
+			pcinfo->pddac[1][2] = (val >> 14) & 0x3;
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pddac[1][2] |=
-						(val & 0xF) << 2;
+			pcinfo->pddac[1][2] |= (val & 0xF) << 2;
 
-			chan_pcal_info->pwr[1][3] = 0;
-			chan_pcal_info->pddac[1][3] = 0;
+			pcinfo->pwr[1][3] = 0;
+			pcinfo->pddac[1][3] = 0;
 		} else if (pd_gains == 1) {
 			/*
 			 * Pd gain 0 is the last one so
 			 * read the extra point.
 			 */
-			chan_pcal_info->pwr[0][3] =
-						(val >> 10) & 0xf;
+			pcinfo->pwr[0][3] = (val >> 10) & 0xf;
 
-			chan_pcal_info->pddac[0][3] =
-						(val >> 14) & 0x3;
+			pcinfo->pddac[0][3] = (val >> 14) & 0x3;
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pddac[0][3] |=
-						(val & 0xF) << 2;
+			pcinfo->pddac[0][3] |= (val & 0xF) << 2;
 		}
 
 		/*
@@ -1048,105 +1338,65 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
 		 * as above.
 		 */
 		if (pd_gains > 2) {
-			chan_pcal_info->pwr_i[2] = (val >> 4) & 0x1f;
-			chan_pcal_info->pddac_i[2] = (val >> 9) & 0x7f;
+			pcinfo->pwr_i[2] = (val >> 4) & 0x1f;
+			pcinfo->pddac_i[2] = (val >> 9) & 0x7f;
 
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pwr[2][0] =
-						(val >> 0) & 0xf;
-			chan_pcal_info->pddac[2][0] =
-						(val >> 4) & 0x3f;
-			chan_pcal_info->pwr[2][1] =
-						(val >> 10) & 0xf;
-
-			chan_pcal_info->pddac[2][1] =
-						(val >> 14) & 0x3;
+			pcinfo->pwr[2][0] = (val >> 0) & 0xf;
+			pcinfo->pddac[2][0] = (val >> 4) & 0x3f;
+			pcinfo->pwr[2][1] = (val >> 10) & 0xf;
+
+			pcinfo->pddac[2][1] = (val >> 14) & 0x3;
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pddac[2][1] |=
-						(val & 0xF) << 2;
+			pcinfo->pddac[2][1] |= (val & 0xF) << 2;
 
-			chan_pcal_info->pwr[2][2] =
-						(val >> 4) & 0xf;
-			chan_pcal_info->pddac[2][2] =
-						(val >> 8) & 0x3f;
+			pcinfo->pwr[2][2] = (val >> 4) & 0xf;
+			pcinfo->pddac[2][2] = (val >> 8) & 0x3f;
 
-			chan_pcal_info->pwr[2][3] = 0;
-			chan_pcal_info->pddac[2][3] = 0;
+			pcinfo->pwr[2][3] = 0;
+			pcinfo->pddac[2][3] = 0;
 		} else if (pd_gains == 2) {
-			chan_pcal_info->pwr[1][3] =
-						(val >> 4) & 0xf;
-			chan_pcal_info->pddac[1][3] =
-						(val >> 8) & 0x3f;
+			pcinfo->pwr[1][3] = (val >> 4) & 0xf;
+			pcinfo->pddac[1][3] = (val >> 8) & 0x3f;
 		}
 
 		if (pd_gains > 3) {
-			chan_pcal_info->pwr_i[3] = (val >> 14) & 0x3;
+			pcinfo->pwr_i[3] = (val >> 14) & 0x3;
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pwr_i[3] |= ((val >> 0) & 0x7) << 2;
+			pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2;
 
-			chan_pcal_info->pddac_i[3] = (val >> 3) & 0x7f;
-			chan_pcal_info->pwr[3][0] =
-						(val >> 10) & 0xf;
-			chan_pcal_info->pddac[3][0] =
-						(val >> 14) & 0x3;
+			pcinfo->pddac_i[3] = (val >> 3) & 0x7f;
+			pcinfo->pwr[3][0] = (val >> 10) & 0xf;
+			pcinfo->pddac[3][0] = (val >> 14) & 0x3;
 
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pddac[3][0] |=
-						(val & 0xF) << 2;
-			chan_pcal_info->pwr[3][1] =
-						(val >> 4) & 0xf;
-			chan_pcal_info->pddac[3][1] =
-						(val >> 8) & 0x3f;
-
-			chan_pcal_info->pwr[3][2] =
-						(val >> 14) & 0x3;
+			pcinfo->pddac[3][0] |= (val & 0xF) << 2;
+			pcinfo->pwr[3][1] = (val >> 4) & 0xf;
+			pcinfo->pddac[3][1] = (val >> 8) & 0x3f;
+
+			pcinfo->pwr[3][2] = (val >> 14) & 0x3;
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pwr[3][2] |=
-						((val >> 0) & 0x3) << 2;
+			pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2;
 
-			chan_pcal_info->pddac[3][2] =
-						(val >> 2) & 0x3f;
-			chan_pcal_info->pwr[3][3] =
-						(val >> 8) & 0xf;
+			pcinfo->pddac[3][2] = (val >> 2) & 0x3f;
+			pcinfo->pwr[3][3] = (val >> 8) & 0xf;
 
-			chan_pcal_info->pddac[3][3] =
-						(val >> 12) & 0xF;
+			pcinfo->pddac[3][3] = (val >> 12) & 0xF;
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pddac[3][3] |=
-						((val >> 0) & 0x3) << 4;
+			pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4;
 		} else if (pd_gains == 3) {
-			chan_pcal_info->pwr[2][3] =
-						(val >> 14) & 0x3;
+			pcinfo->pwr[2][3] = (val >> 14) & 0x3;
 			AR5K_EEPROM_READ(offset++, val);
-			chan_pcal_info->pwr[2][3] |=
-						((val >> 0) & 0x3) << 2;
-
-			chan_pcal_info->pddac[2][3] =
-						(val >> 2) & 0x3f;
-		}
+			pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2;
 
-		for (c = 0; c < pd_gains; c++) {
-			/* Recreate pwr table for this channel using pwr steps */
-			chan_pcal_info->pwr[c][0] += chan_pcal_info->pwr_i[c] * 2;
-			chan_pcal_info->pwr[c][1] += chan_pcal_info->pwr[c][0];
-			chan_pcal_info->pwr[c][2] += chan_pcal_info->pwr[c][1];
-			chan_pcal_info->pwr[c][3] += chan_pcal_info->pwr[c][2];
-			if (chan_pcal_info->pwr[c][3] == chan_pcal_info->pwr[c][2])
-				chan_pcal_info->pwr[c][3] = 0;
-
-			/* Recreate pddac table for this channel using pddac steps */
-			chan_pcal_info->pddac[c][0] += chan_pcal_info->pddac_i[c];
-			chan_pcal_info->pddac[c][1] += chan_pcal_info->pddac[c][0];
-			chan_pcal_info->pddac[c][2] += chan_pcal_info->pddac[c][1];
-			chan_pcal_info->pddac[c][3] += chan_pcal_info->pddac[c][2];
-			if (chan_pcal_info->pddac[c][3] == chan_pcal_info->pddac[c][2])
-				chan_pcal_info->pddac[c][3] = 0;
+			pcinfo->pddac[2][3] = (val >> 2) & 0x3f;
 		}
 	}
 
-	return 0;
+	return ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo);
 }
 
+
 /*
  * Read per rate target power (this is the maximum tx power
  * supported by the card). This info is used when setting
@@ -1154,11 +1404,12 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
  *
  * This also works for v5 EEPROMs.
  */
-static int ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
+static int
+ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
 {
 	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
 	struct ath5k_rate_pcal_info *rate_pcal_info;
-	u16 *rate_target_pwr_num;
+	u8 *rate_target_pwr_num;
 	u32 offset;
 	u16 val;
 	int ret, i;
@@ -1264,7 +1515,9 @@ ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah)
 	else
 		read_pcal = ath5k_eeprom_read_pcal_info_5111;
 
-	for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) {
+
+	for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G;
+	mode++) {
 		err = read_pcal(ah, mode);
 		if (err)
 			return err;
@@ -1277,6 +1530,62 @@ ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah)
 	return 0;
 }
 
+static int
+ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info *chinfo;
+	u8 pier, pdg;
+
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
+			return 0;
+		chinfo = ee->ee_pwr_cal_a;
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
+			return 0;
+		chinfo = ee->ee_pwr_cal_b;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
+			return 0;
+		chinfo = ee->ee_pwr_cal_g;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) {
+		if (!chinfo[pier].pd_curves)
+			continue;
+
+		for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+			struct ath5k_pdgain_info *pd =
+					&chinfo[pier].pd_curves[pdg];
+
+			if (pd != NULL) {
+				kfree(pd->pd_step);
+				kfree(pd->pd_pwr);
+			}
+		}
+
+		kfree(chinfo[pier].pd_curves);
+	}
+
+	return 0;
+}
+
+void
+ath5k_eeprom_detach(struct ath5k_hw *ah)
+{
+	u8 mode;
+
+	for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++)
+		ath5k_eeprom_free_pcal_info(ah, mode);
+}
+
 /* Read conformance test limits used for regulatory control */
 static int
 ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah)
@@ -1457,3 +1766,4 @@ bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah)
 	else
 		return false;
 }
+
diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath5k/eeprom.h
index 1deebc0257d4..b0c0606dea0b 100644
--- a/drivers/net/wireless/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath5k/eeprom.h
@@ -173,6 +173,7 @@
 #define AR5K_EEPROM_N_5GHZ_CHAN		10
 #define AR5K_EEPROM_N_2GHZ_CHAN		3
 #define AR5K_EEPROM_N_2GHZ_CHAN_2413	4
+#define	AR5K_EEPROM_N_2GHZ_CHAN_MAX	4
 #define AR5K_EEPROM_MAX_CHAN		10
 #define AR5K_EEPROM_N_PWR_POINTS_5111	11
 #define AR5K_EEPROM_N_PCDAC		11
@@ -193,7 +194,7 @@
 #define AR5K_EEPROM_SCALE_OC_DELTA(_x)	(((_x) * 2) / 10)
 #define AR5K_EEPROM_N_CTLS(_v)		AR5K_EEPROM_OFF(_v, 16, 32)
 #define AR5K_EEPROM_MAX_CTLS		32
-#define AR5K_EEPROM_N_XPD_PER_CHANNEL	4
+#define AR5K_EEPROM_N_PD_CURVES		4
 #define AR5K_EEPROM_N_XPD0_POINTS	4
 #define AR5K_EEPROM_N_XPD3_POINTS	3
 #define AR5K_EEPROM_N_PD_GAINS		4
@@ -232,7 +233,7 @@ enum ath5k_ctl_mode {
 	AR5K_CTL_11B = 1,
 	AR5K_CTL_11G = 2,
 	AR5K_CTL_TURBO = 3,
-	AR5K_CTL_108G = 4,
+	AR5K_CTL_TURBOG = 4,
 	AR5K_CTL_2GHT20 = 5,
 	AR5K_CTL_5GHT20 = 6,
 	AR5K_CTL_2GHT40 = 7,
@@ -240,65 +241,114 @@ enum ath5k_ctl_mode {
 	AR5K_CTL_MODE_M = 15,
 };
 
+/* Default CTL ids for the 3 main reg domains.
+ * Atheros only uses these by default but vendors
+ * can have up to 32 different CTLs for different
+ * scenarios. Note that theese values are ORed with
+ * the mode id (above) so we can have up to 24 CTL
+ * datasets out of these 3 main regdomains. That leaves
+ * 8 ids that can be used by vendors and since 0x20 is
+ * missing from HAL sources i guess this is the set of
+ * custom CTLs vendors can use. */
+#define	AR5K_CTL_FCC	0x10
+#define	AR5K_CTL_CUSTOM	0x20
+#define	AR5K_CTL_ETSI	0x30
+#define	AR5K_CTL_MKK	0x40
+
+/* Indicates a CTL with only mode set and
+ * no reg domain mapping, such CTLs are used
+ * for world roaming domains or simply when
+ * a reg domain is not set */
+#define	AR5K_CTL_NO_REGDOMAIN	0xf0
+
+/* Indicates an empty (invalid) CTL */
+#define AR5K_CTL_NO_CTL		0xff
+
 /* Per channel calibration data, used for power table setup */
 struct ath5k_chan_pcal_info_rf5111 {
 	/* Power levels in half dbm units
 	 * for one power curve. */
-	u8		pwr[AR5K_EEPROM_N_PWR_POINTS_5111];
+	u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111];
 	/* PCDAC table steps
 	 * for the above values */
-	u8		pcdac[AR5K_EEPROM_N_PWR_POINTS_5111];
+	u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111];
 	/* Starting PCDAC step */
-	u8		pcdac_min;
+	u8 pcdac_min;
 	/* Final PCDAC step */
-	u8		pcdac_max;
+	u8 pcdac_max;
 };
 
 struct ath5k_chan_pcal_info_rf5112 {
 	/* Power levels in quarter dBm units
 	 * for lower (0) and higher (3)
-	 * level curves */
-	s8		pwr_x0[AR5K_EEPROM_N_XPD0_POINTS];
-	s8		pwr_x3[AR5K_EEPROM_N_XPD3_POINTS];
+	 * level curves in 0.25dB units */
+	s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS];
+	s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS];
 	/* PCDAC table steps
 	 * for the above values */
-	u8	pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS];
-	u8	pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS];
+	u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS];
+	u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS];
 };
 
 struct ath5k_chan_pcal_info_rf2413 {
 	/* Starting pwr/pddac values */
-	s8		pwr_i[AR5K_EEPROM_N_PD_GAINS];
-	u8	pddac_i[AR5K_EEPROM_N_PD_GAINS];
-	/* (pwr,pddac) points */
-	s8		pwr[AR5K_EEPROM_N_PD_GAINS]
-				[AR5K_EEPROM_N_PD_POINTS];
-	u8	pddac[AR5K_EEPROM_N_PD_GAINS]
-				[AR5K_EEPROM_N_PD_POINTS];
+	s8 pwr_i[AR5K_EEPROM_N_PD_GAINS];
+	u8 pddac_i[AR5K_EEPROM_N_PD_GAINS];
+	/* (pwr,pddac) points
+	 * power levels in 0.5dB units */
+	s8 pwr[AR5K_EEPROM_N_PD_GAINS]
+		[AR5K_EEPROM_N_PD_POINTS];
+	u8 pddac[AR5K_EEPROM_N_PD_GAINS]
+		[AR5K_EEPROM_N_PD_POINTS];
+};
+
+enum ath5k_powertable_type {
+	AR5K_PWRTABLE_PWR_TO_PCDAC = 0,
+	AR5K_PWRTABLE_LINEAR_PCDAC = 1,
+	AR5K_PWRTABLE_PWR_TO_PDADC = 2,
+};
+
+struct ath5k_pdgain_info {
+	u8 pd_points;
+	u8 *pd_step;
+	/* Power values are in
+	 * 0.25dB units */
+	s16 *pd_pwr;
 };
 
 struct ath5k_chan_pcal_info {
 	/* Frequency */
 	u16	freq;
-	/* Max available power */
-	s8		max_pwr;
+	/* Tx power boundaries */
+	s16	max_pwr;
+	s16	min_pwr;
 	union {
 		struct ath5k_chan_pcal_info_rf5111 rf5111_info;
 		struct ath5k_chan_pcal_info_rf5112 rf5112_info;
 		struct ath5k_chan_pcal_info_rf2413 rf2413_info;
 	};
+	/* Raw values used by phy code
+	 * Curves are stored in order from lower
+	 * gain to higher gain (max txpower -> min txpower) */
+	struct ath5k_pdgain_info *pd_curves;
 };
 
-/* Per rate calibration data for each mode, used for power table setup */
+/* Per rate calibration data for each mode,
+ * used for rate power table setup.
+ * Note: Values in 0.5dB units */
 struct ath5k_rate_pcal_info {
 	u16	freq; /* Frequency */
-	/* Power level for 6-24Mbit/s rates */
+	/* Power level for 6-24Mbit/s rates or
+	 * 1Mb rate */
 	u16	target_power_6to24;
-	/* Power level for 36Mbit rate */
+	/* Power level for 36Mbit rate or
+	 * 2Mb rate */
 	u16	target_power_36;
-	/* Power level for 48Mbit rate */
+	/* Power level for 48Mbit rate or
+	 * 5.5Mbit rate */
 	u16	target_power_48;
-	/* Power level for 54Mbit rate */
+	/* Power level for 54Mbit rate or
+	 * 11Mbit rate */
 	u16	target_power_54;
 };
 
@@ -330,12 +380,6 @@ struct ath5k_eeprom_info {
 	u16	ee_cck_ofdm_power_delta;
 	u16	ee_scaled_cck_delta;
 
-	/* Used for tx thermal adjustment (eeprom_init, rfregs) */
-	u16	ee_tx_clip;
-	u16	ee_pwd_84;
-	u16	ee_pwd_90;
-	u16	ee_gain_select;
-
 	/* RF Calibration settings (reset, rfregs) */
 	u16	ee_i_cal[AR5K_EEPROM_N_MODES];
 	u16	ee_q_cal[AR5K_EEPROM_N_MODES];
@@ -363,23 +407,25 @@ struct ath5k_eeprom_info {
 	/* Power calibration data */
 	u16	ee_false_detect[AR5K_EEPROM_N_MODES];
 
-	/* Number of pd gain curves per mode (RF2413) */
-	u8 ee_pd_gains[AR5K_EEPROM_N_MODES];
+	/* Number of pd gain curves per mode */
+	u8	ee_pd_gains[AR5K_EEPROM_N_MODES];
+	/* Back mapping pdcurve number -> pdcurve index in pd->pd_curves */
+	u8	ee_pdc_to_idx[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PD_GAINS];
 
-	u8 ee_n_piers[AR5K_EEPROM_N_MODES];
+	u8	ee_n_piers[AR5K_EEPROM_N_MODES];
 	struct ath5k_chan_pcal_info	ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN];
-	struct ath5k_chan_pcal_info	ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN];
-	struct ath5k_chan_pcal_info	ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN];
+	struct ath5k_chan_pcal_info	ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+	struct ath5k_chan_pcal_info	ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
 
 	/* Per rate target power levels */
-	u16	ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES];
+	u8	ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES];
 	struct ath5k_rate_pcal_info	ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN];
-	struct ath5k_rate_pcal_info	ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN];
-	struct ath5k_rate_pcal_info	ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN];
+	struct ath5k_rate_pcal_info	ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+	struct ath5k_rate_pcal_info	ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
 
 	/* Conformance test limits (Unused) */
-	u16	ee_ctls;
-	u16	ee_ctl[AR5K_EEPROM_MAX_CTLS];
+	u8	ee_ctls;
+	u8	ee_ctl[AR5K_EEPROM_MAX_CTLS];
 	struct ath5k_edge_power ee_ctl_pwr[AR5K_EEPROM_N_EDGES * AR5K_EEPROM_MAX_CTLS];
 
 	/* Noise Floor Calibration settings */
diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c
index 44886434187b..61fb621ed20d 100644
--- a/drivers/net/wireless/ath5k/initvals.c
+++ b/drivers/net/wireless/ath5k/initvals.c
@@ -1510,8 +1510,8 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
 					rf2425_ini_mode_end, mode);
 
 			ath5k_hw_ini_registers(ah,
-					ARRAY_SIZE(rf2413_ini_common_end),
-					rf2413_ini_common_end, change_channel);
+					ARRAY_SIZE(rf2425_ini_common_end),
+					rf2425_ini_common_end, change_channel);
 
 			ath5k_hw_ini_registers(ah,
 					ARRAY_SIZE(rf5112_ini_bbgain),
diff --git a/drivers/net/wireless/ath5k/led.c b/drivers/net/wireless/ath5k/led.c
index 0686e12738b3..19555fb79c9b 100644
--- a/drivers/net/wireless/ath5k/led.c
+++ b/drivers/net/wireless/ath5k/led.c
@@ -65,6 +65,8 @@ static const struct pci_device_id ath5k_led_devices[] = {
 	{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) },
 	/* E-machines E510 (tuliom@gmail.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) },
+	/* Acer Extensa 5620z (nekoreeve@gmail.com) */
+	{ ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) },
 	{ }
 };
 
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index 81f5bebc48b1..9e2faae5ae94 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -4,6 +4,7 @@
  * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
  * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
  * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -183,7 +184,9 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
 	if (ah->ah_gain.g_state != AR5K_RFGAIN_ACTIVE)
 		return;
 
-	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max,
+	/* Send the packet with 2dB below max power as
+	 * patent doc suggest */
+	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4,
 			AR5K_PHY_PAPD_PROBE_TXPOWER) |
 			AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
 
@@ -1433,93 +1436,1120 @@ unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah)
 	return false; /*XXX: What do we return for 5210 ?*/
 }
 
+
+/****************\
+* TX power setup *
+\****************/
+
+/*
+ * Helper functions
+ */
+
+/*
+ * Do linear interpolation between two given (x, y) points
+ */
+static s16
+ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right,
+					s16 y_left, s16 y_right)
+{
+	s16 ratio, result;
+
+	/* Avoid divide by zero and skip interpolation
+	 * if we have the same point */
+	if ((x_left == x_right) || (y_left == y_right))
+		return y_left;
+
+	/*
+	 * Since we use ints and not fps, we need to scale up in
+	 * order to get a sane ratio value (or else we 'll eg. get
+	 * always 1 instead of 1.25, 1.75 etc). We scale up by 100
+	 * to have some accuracy both for 0.5 and 0.25 steps.
+	 */
+	ratio = ((100 * y_right - 100 * y_left)/(x_right - x_left));
+
+	/* Now scale down to be in range */
+	result = y_left + (ratio * (target - x_left) / 100);
+
+	return result;
+}
+
+/*
+ * Find vertical boundary (min pwr) for the linear PCDAC curve.
+ *
+ * Since we have the top of the curve and we draw the line below
+ * until we reach 1 (1 pcdac step) we need to know which point
+ * (x value) that is so that we don't go below y axis and have negative
+ * pcdac values when creating the curve, or fill the table with zeroes.
+ */
+static s16
+ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
+				const s16 *pwrL, const s16 *pwrR)
+{
+	s8 tmp;
+	s16 min_pwrL, min_pwrR;
+	s16 pwr_i = pwrL[0];
+
+	do {
+		pwr_i--;
+		tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+						pwrL[0], pwrL[1],
+						stepL[0], stepL[1]);
+
+	} while (tmp > 1);
+
+	min_pwrL = pwr_i;
+
+	pwr_i = pwrR[0];
+	do {
+		pwr_i--;
+		tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+						pwrR[0], pwrR[1],
+						stepR[0], stepR[1]);
+
+	} while (tmp > 1);
+
+	min_pwrR = pwr_i;
+
+	/* Keep the right boundary so that it works for both curves */
+	return max(min_pwrL, min_pwrR);
+}
+
+/*
+ * Interpolate (pwr,vpd) points to create a Power to PDADC or a
+ * Power to PCDAC curve.
+ *
+ * Each curve has power on x axis (in 0.5dB units) and PCDAC/PDADC
+ * steps (offsets) on y axis. Power can go up to 31.5dB and max
+ * PCDAC/PDADC step for each curve is 64 but we can write more than
+ * one curves on hw so we can go up to 128 (which is the max step we
+ * can write on the final table).
+ *
+ * We write y values (PCDAC/PDADC steps) on hw.
+ */
+static void
+ath5k_create_power_curve(s16 pmin, s16 pmax,
+			const s16 *pwr, const u8 *vpd,
+			u8 num_points,
+			u8 *vpd_table, u8 type)
+{
+	u8 idx[2] = { 0, 1 };
+	s16 pwr_i = 2*pmin;
+	int i;
+
+	if (num_points < 2)
+		return;
+
+	/* We want the whole line, so adjust boundaries
+	 * to cover the entire power range. Note that
+	 * power values are already 0.25dB so no need
+	 * to multiply pwr_i by 2 */
+	if (type == AR5K_PWRTABLE_LINEAR_PCDAC) {
+		pwr_i = pmin;
+		pmin = 0;
+		pmax = 63;
+	}
+
+	/* Find surrounding turning points (TPs)
+	 * and interpolate between them */
+	for (i = 0; (i <= (u16) (pmax - pmin)) &&
+	(i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) {
+
+		/* We passed the right TP, move to the next set of TPs
+		 * if we pass the last TP, extrapolate above using the last
+		 * two TPs for ratio */
+		if ((pwr_i > pwr[idx[1]]) && (idx[1] < num_points - 1)) {
+			idx[0]++;
+			idx[1]++;
+		}
+
+		vpd_table[i] = (u8) ath5k_get_interpolated_value(pwr_i,
+						pwr[idx[0]], pwr[idx[1]],
+						vpd[idx[0]], vpd[idx[1]]);
+
+		/* Increase by 0.5dB
+		 * (0.25 dB units) */
+		pwr_i += 2;
+	}
+}
+
+/*
+ * Get the surrounding per-channel power calibration piers
+ * for a given frequency so that we can interpolate between
+ * them and come up with an apropriate dataset for our current
+ * channel.
+ */
+static void
+ath5k_get_chan_pcal_surrounding_piers(struct ath5k_hw *ah,
+			struct ieee80211_channel *channel,
+			struct ath5k_chan_pcal_info **pcinfo_l,
+			struct ath5k_chan_pcal_info **pcinfo_r)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_chan_pcal_info *pcinfo;
+	u8 idx_l, idx_r;
+	u8 mode, max, i;
+	u32 target = channel->center_freq;
+
+	idx_l = 0;
+	idx_r = 0;
+
+	if (!(channel->hw_value & CHANNEL_OFDM)) {
+		pcinfo = ee->ee_pwr_cal_b;
+		mode = AR5K_EEPROM_MODE_11B;
+	} else if (channel->hw_value & CHANNEL_2GHZ) {
+		pcinfo = ee->ee_pwr_cal_g;
+		mode = AR5K_EEPROM_MODE_11G;
+	} else {
+		pcinfo = ee->ee_pwr_cal_a;
+		mode = AR5K_EEPROM_MODE_11A;
+	}
+	max = ee->ee_n_piers[mode] - 1;
+
+	/* Frequency is below our calibrated
+	 * range. Use the lowest power curve
+	 * we have */
+	if (target < pcinfo[0].freq) {
+		idx_l = idx_r = 0;
+		goto done;
+	}
+
+	/* Frequency is above our calibrated
+	 * range. Use the highest power curve
+	 * we have */
+	if (target > pcinfo[max].freq) {
+		idx_l = idx_r = max;
+		goto done;
+	}
+
+	/* Frequency is inside our calibrated
+	 * channel range. Pick the surrounding
+	 * calibration piers so that we can
+	 * interpolate */
+	for (i = 0; i <= max; i++) {
+
+		/* Frequency matches one of our calibration
+		 * piers, no need to interpolate, just use
+		 * that calibration pier */
+		if (pcinfo[i].freq == target) {
+			idx_l = idx_r = i;
+			goto done;
+		}
+
+		/* We found a calibration pier that's above
+		 * frequency, use this pier and the previous
+		 * one to interpolate */
+		if (target < pcinfo[i].freq) {
+			idx_r = i;
+			idx_l = idx_r - 1;
+			goto done;
+		}
+	}
+
+done:
+	*pcinfo_l = &pcinfo[idx_l];
+	*pcinfo_r = &pcinfo[idx_r];
+
+	return;
+}
+
+/*
+ * Get the surrounding per-rate power calibration data
+ * for a given frequency and interpolate between power
+ * values to set max target power supported by hw for
+ * each rate.
+ */
+static void
+ath5k_get_rate_pcal_data(struct ath5k_hw *ah,
+			struct ieee80211_channel *channel,
+			struct ath5k_rate_pcal_info *rates)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_rate_pcal_info *rpinfo;
+	u8 idx_l, idx_r;
+	u8 mode, max, i;
+	u32 target = channel->center_freq;
+
+	idx_l = 0;
+	idx_r = 0;
+
+	if (!(channel->hw_value & CHANNEL_OFDM)) {
+		rpinfo = ee->ee_rate_tpwr_b;
+		mode = AR5K_EEPROM_MODE_11B;
+	} else if (channel->hw_value & CHANNEL_2GHZ) {
+		rpinfo = ee->ee_rate_tpwr_g;
+		mode = AR5K_EEPROM_MODE_11G;
+	} else {
+		rpinfo = ee->ee_rate_tpwr_a;
+		mode = AR5K_EEPROM_MODE_11A;
+	}
+	max = ee->ee_rate_target_pwr_num[mode] - 1;
+
+	/* Get the surrounding calibration
+	 * piers - same as above */
+	if (target < rpinfo[0].freq) {
+		idx_l = idx_r = 0;
+		goto done;
+	}
+
+	if (target > rpinfo[max].freq) {
+		idx_l = idx_r = max;
+		goto done;
+	}
+
+	for (i = 0; i <= max; i++) {
+
+		if (rpinfo[i].freq == target) {
+			idx_l = idx_r = i;
+			goto done;
+		}
+
+		if (target < rpinfo[i].freq) {
+			idx_r = i;
+			idx_l = idx_r - 1;
+			goto done;
+		}
+	}
+
+done:
+	/* Now interpolate power value, based on the frequency */
+	rates->freq = target;
+
+	rates->target_power_6to24 =
+		ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+					rpinfo[idx_r].freq,
+					rpinfo[idx_l].target_power_6to24,
+					rpinfo[idx_r].target_power_6to24);
+
+	rates->target_power_36 =
+		ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+					rpinfo[idx_r].freq,
+					rpinfo[idx_l].target_power_36,
+					rpinfo[idx_r].target_power_36);
+
+	rates->target_power_48 =
+		ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+					rpinfo[idx_r].freq,
+					rpinfo[idx_l].target_power_48,
+					rpinfo[idx_r].target_power_48);
+
+	rates->target_power_54 =
+		ath5k_get_interpolated_value(target, rpinfo[idx_l].freq,
+					rpinfo[idx_r].freq,
+					rpinfo[idx_l].target_power_54,
+					rpinfo[idx_r].target_power_54);
+}
+
+/*
+ * Get the max edge power for this channel if
+ * we have such data from EEPROM's Conformance Test
+ * Limits (CTL), and limit max power if needed.
+ *
+ * FIXME: Only works for world regulatory domains
+ */
+static void
+ath5k_get_max_ctl_power(struct ath5k_hw *ah,
+			struct ieee80211_channel *channel)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct ath5k_edge_power *rep = ee->ee_ctl_pwr;
+	u8 *ctl_val = ee->ee_ctl;
+	s16 max_chan_pwr = ah->ah_txpower.txp_max_pwr / 4;
+	s16 edge_pwr = 0;
+	u8 rep_idx;
+	u8 i, ctl_mode;
+	u8 ctl_idx = 0xFF;
+	u32 target = channel->center_freq;
+
+	/* Find out a CTL for our mode that's not mapped
+	 * on a specific reg domain.
+	 *
+	 * TODO: Map our current reg domain to one of the 3 available
+	 * reg domain ids so that we can support more CTLs. */
+	switch (channel->hw_value & CHANNEL_MODES) {
+	case CHANNEL_A:
+		ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN;
+		break;
+	case CHANNEL_G:
+		ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN;
+		break;
+	case CHANNEL_B:
+		ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN;
+		break;
+	case CHANNEL_T:
+		ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN;
+		break;
+	case CHANNEL_TG:
+		ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN;
+		break;
+	case CHANNEL_XR:
+		/* Fall through */
+	default:
+		return;
+	}
+
+	for (i = 0; i < ee->ee_ctls; i++) {
+		if (ctl_val[i] == ctl_mode) {
+			ctl_idx = i;
+			break;
+		}
+	}
+
+	/* If we have a CTL dataset available grab it and find the
+	 * edge power for our frequency */
+	if (ctl_idx == 0xFF)
+		return;
+
+	/* Edge powers are sorted by frequency from lower
+	 * to higher. Each CTL corresponds to 8 edge power
+	 * measurements. */
+	rep_idx = ctl_idx * AR5K_EEPROM_N_EDGES;
+
+	/* Don't do boundaries check because we
+	 * might have more that one bands defined
+	 * for this mode */
+
+	/* Get the edge power that's closer to our
+	 * frequency */
+	for (i = 0; i < AR5K_EEPROM_N_EDGES; i++) {
+		rep_idx += i;
+		if (target <= rep[rep_idx].freq)
+			edge_pwr = (s16) rep[rep_idx].edge;
+	}
+
+	if (edge_pwr)
+		ah->ah_txpower.txp_max_pwr = 4*min(edge_pwr, max_chan_pwr);
+}
+
+
+/*
+ * Power to PCDAC table functions
+ */
+
 /*
- * TX power setup
+ * Fill Power to PCDAC table on RF5111
+ *
+ * No further processing is needed for RF5111, the only thing we have to
+ * do is fill the values below and above calibration range since eeprom data
+ * may not cover the entire PCDAC table.
  */
+static void
+ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min,
+							s16 *table_max)
+{
+	u8 	*pcdac_out = ah->ah_txpower.txp_pd_table;
+	u8	*pcdac_tmp = ah->ah_txpower.tmpL[0];
+	u8	pcdac_0, pcdac_n, pcdac_i, pwr_idx, i;
+	s16	min_pwr, max_pwr;
+
+	/* Get table boundaries */
+	min_pwr = table_min[0];
+	pcdac_0 = pcdac_tmp[0];
+
+	max_pwr = table_max[0];
+	pcdac_n = pcdac_tmp[table_max[0] - table_min[0]];
+
+	/* Extrapolate below minimum using pcdac_0 */
+	pcdac_i = 0;
+	for (i = 0; i < min_pwr; i++)
+		pcdac_out[pcdac_i++] = pcdac_0;
+
+	/* Copy values from pcdac_tmp */
+	pwr_idx = min_pwr;
+	for (i = 0 ; pwr_idx <= max_pwr &&
+	pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) {
+		pcdac_out[pcdac_i++] = pcdac_tmp[i];
+		pwr_idx++;
+	}
+
+	/* Extrapolate above maximum */
+	while (pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE)
+		pcdac_out[pcdac_i++] = pcdac_n;
+
+}
 
 /*
- * Initialize the tx power table (not fully implemented)
+ * Combine available XPD Curves and fill Linear Power to PCDAC table
+ * on RF5112
+ *
+ * RFX112 can have up to 2 curves (one for low txpower range and one for
+ * higher txpower range). We need to put them both on pcdac_out and place
+ * them in the correct location. In case we only have one curve available
+ * just fit it on pcdac_out (it's supposed to cover the entire range of
+ * available pwr levels since it's always the higher power curve). Extrapolate
+ * below and above final table if needed.
  */
-static void ath5k_txpower_table(struct ath5k_hw *ah,
-		struct ieee80211_channel *channel, s16 max_power)
+static void
+ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min,
+						s16 *table_max, u8 pdcurves)
 {
-	unsigned int i, min, max, n;
-	u16 txpower, *rates;
-
-	rates = ah->ah_txpower.txp_rates;
-
-	txpower = AR5K_TUNE_DEFAULT_TXPOWER * 2;
-	if (max_power > txpower)
-		txpower = max_power > AR5K_TUNE_MAX_TXPOWER ?
-		    AR5K_TUNE_MAX_TXPOWER : max_power;
-
-	for (i = 0; i < AR5K_MAX_RATES; i++)
-		rates[i] = txpower;
-
-	/* XXX setup target powers by rate */
-
-	ah->ah_txpower.txp_min = rates[7];
-	ah->ah_txpower.txp_max = rates[0];
-	ah->ah_txpower.txp_ofdm = rates[0];
-
-	/* Calculate the power table */
-	n = ARRAY_SIZE(ah->ah_txpower.txp_pcdac);
-	min = AR5K_EEPROM_PCDAC_START;
-	max = AR5K_EEPROM_PCDAC_STOP;
-	for (i = 0; i < n; i += AR5K_EEPROM_PCDAC_STEP)
-		ah->ah_txpower.txp_pcdac[i] =
-#ifdef notyet
-		min + ((i * (max - min)) / n);
-#else
-		min;
+	u8 	*pcdac_out = ah->ah_txpower.txp_pd_table;
+	u8	*pcdac_low_pwr;
+	u8	*pcdac_high_pwr;
+	u8	*pcdac_tmp;
+	u8	pwr;
+	s16	max_pwr_idx;
+	s16	min_pwr_idx;
+	s16	mid_pwr_idx = 0;
+	/* Edge flag turs on the 7nth bit on the PCDAC
+	 * to delcare the higher power curve (force values
+	 * to be greater than 64). If we only have one curve
+	 * we don't need to set this, if we have 2 curves and
+	 * fill the table backwards this can also be used to
+	 * switch from higher power curve to lower power curve */
+	u8	edge_flag;
+	int	i;
+
+	/* When we have only one curve available
+	 * that's the higher power curve. If we have
+	 * two curves the first is the high power curve
+	 * and the next is the low power curve. */
+	if (pdcurves > 1) {
+		pcdac_low_pwr = ah->ah_txpower.tmpL[1];
+		pcdac_high_pwr = ah->ah_txpower.tmpL[0];
+		mid_pwr_idx = table_max[1] - table_min[1] - 1;
+		max_pwr_idx = (table_max[0] - table_min[0]) / 2;
+
+		/* If table size goes beyond 31.5dB, keep the
+		 * upper 31.5dB range when setting tx power.
+		 * Note: 126 = 31.5 dB in quarter dB steps */
+		if (table_max[0] - table_min[1] > 126)
+			min_pwr_idx = table_max[0] - 126;
+		else
+			min_pwr_idx = table_min[1];
+
+		/* Since we fill table backwards
+		 * start from high power curve */
+		pcdac_tmp = pcdac_high_pwr;
+
+		edge_flag = 0x40;
+#if 0
+		/* If both min and max power limits are in lower
+		 * power curve's range, only use the low power curve.
+		 * TODO: min/max levels are related to target
+		 * power values requested from driver/user
+		 * XXX: Is this really needed ? */
+		if (min_pwr < table_max[1] &&
+		max_pwr < table_max[1]) {
+			edge_flag = 0;
+			pcdac_tmp = pcdac_low_pwr;
+			max_pwr_idx = (table_max[1] - table_min[1])/2;
+		}
 #endif
+	} else {
+		pcdac_low_pwr = ah->ah_txpower.tmpL[1]; /* Zeroed */
+		pcdac_high_pwr = ah->ah_txpower.tmpL[0];
+		min_pwr_idx = table_min[0];
+		max_pwr_idx = (table_max[0] - table_min[0]) / 2;
+		pcdac_tmp = pcdac_high_pwr;
+		edge_flag = 0;
+	}
+
+	/* This is used when setting tx power*/
+	ah->ah_txpower.txp_min_idx = min_pwr_idx/2;
+
+	/* Fill Power to PCDAC table backwards */
+	pwr = max_pwr_idx;
+	for (i = 63; i >= 0; i--) {
+		/* Entering lower power range, reset
+		 * edge flag and set pcdac_tmp to lower
+		 * power curve.*/
+		if (edge_flag == 0x40 &&
+		(2*pwr <= (table_max[1] - table_min[0]) || pwr == 0)) {
+			edge_flag = 0x00;
+			pcdac_tmp = pcdac_low_pwr;
+			pwr = mid_pwr_idx/2;
+		}
+
+		/* Don't go below 1, extrapolate below if we have
+		 * already swithced to the lower power curve -or
+		 * we only have one curve and edge_flag is zero
+		 * anyway */
+		if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) {
+			while (i >= 0) {
+				pcdac_out[i] = pcdac_out[i + 1];
+				i--;
+			}
+			break;
+		}
+
+		pcdac_out[i] = pcdac_tmp[pwr] | edge_flag;
+
+		/* Extrapolate above if pcdac is greater than
+		 * 126 -this can happen because we OR pcdac_out
+		 * value with edge_flag on high power curve */
+		if (pcdac_out[i] > 126)
+			pcdac_out[i] = 126;
+
+		/* Decrease by a 0.5dB step */
+		pwr--;
+	}
 }
 
+/* Write PCDAC values on hw */
+static void
+ath5k_setup_pcdac_table(struct ath5k_hw *ah)
+{
+	u8 	*pcdac_out = ah->ah_txpower.txp_pd_table;
+	int	i;
+
+	/*
+	 * Write TX power values
+	 */
+	for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
+		ath5k_hw_reg_write(ah,
+			(((pcdac_out[2*i + 0] << 8 | 0xff) & 0xffff) << 0) |
+			(((pcdac_out[2*i + 1] << 8 | 0xff) & 0xffff) << 16),
+			AR5K_PHY_PCDAC_TXPOWER(i));
+	}
+}
+
+
 /*
- * Set transmition power
+ * Power to PDADC table functions
  */
-int /*O.K. - txpower_table is unimplemented so this doesn't work*/
-ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
-		unsigned int txpower)
+
+/*
+ * Set the gain boundaries and create final Power to PDADC table
+ *
+ * We can have up to 4 pd curves, we need to do a simmilar process
+ * as we do for RF5112. This time we don't have an edge_flag but we
+ * set the gain boundaries on a separate register.
+ */
+static void
+ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah,
+			s16 *pwr_min, s16 *pwr_max, u8 pdcurves)
 {
-	bool tpc = ah->ah_txpower.txp_tpc;
-	unsigned int i;
+	u8 gain_boundaries[AR5K_EEPROM_N_PD_GAINS];
+	u8 *pdadc_out = ah->ah_txpower.txp_pd_table;
+	u8 *pdadc_tmp;
+	s16 pdadc_0;
+	u8 pdadc_i, pdadc_n, pwr_step, pdg, max_idx, table_size;
+	u8 pd_gain_overlap;
+
+	/* Note: Register value is initialized on initvals
+	 * there is no feedback from hw.
+	 * XXX: What about pd_gain_overlap from EEPROM ? */
+	pd_gain_overlap = (u8) ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG5) &
+		AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP;
+
+	/* Create final PDADC table */
+	for (pdg = 0, pdadc_i = 0; pdg < pdcurves; pdg++) {
+		pdadc_tmp = ah->ah_txpower.tmpL[pdg];
+
+		if (pdg == pdcurves - 1)
+			/* 2 dB boundary stretch for last
+			 * (higher power) curve */
+			gain_boundaries[pdg] = pwr_max[pdg] + 4;
+		else
+			/* Set gain boundary in the middle
+			 * between this curve and the next one */
+			gain_boundaries[pdg] =
+				(pwr_max[pdg] + pwr_min[pdg + 1]) / 2;
+
+		/* Sanity check in case our 2 db stretch got out of
+		 * range. */
+		if (gain_boundaries[pdg] > AR5K_TUNE_MAX_TXPOWER)
+			gain_boundaries[pdg] = AR5K_TUNE_MAX_TXPOWER;
+
+		/* For the first curve (lower power)
+		 * start from 0 dB */
+		if (pdg == 0)
+			pdadc_0 = 0;
+		else
+			/* For the other curves use the gain overlap */
+			pdadc_0 = (gain_boundaries[pdg - 1] - pwr_min[pdg]) -
+							pd_gain_overlap;
 
-	ATH5K_TRACE(ah->ah_sc);
-	if (txpower > AR5K_TUNE_MAX_TXPOWER) {
-		ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
-		return -EINVAL;
+		/* Force each power step to be at least 0.5 dB */
+		if ((pdadc_tmp[1] - pdadc_tmp[0]) > 1)
+			pwr_step = pdadc_tmp[1] - pdadc_tmp[0];
+		else
+			pwr_step = 1;
+
+		/* If pdadc_0 is negative, we need to extrapolate
+		 * below this pdgain by a number of pwr_steps */
+		while ((pdadc_0 < 0) && (pdadc_i < 128)) {
+			s16 tmp = pdadc_tmp[0] + pdadc_0 * pwr_step;
+			pdadc_out[pdadc_i++] = (tmp < 0) ? 0 : (u8) tmp;
+			pdadc_0++;
+		}
+
+		/* Set last pwr level, using gain boundaries */
+		pdadc_n = gain_boundaries[pdg] + pd_gain_overlap - pwr_min[pdg];
+		/* Limit it to be inside pwr range */
+		table_size = pwr_max[pdg] - pwr_min[pdg];
+		max_idx = (pdadc_n < table_size) ? pdadc_n : table_size;
+
+		/* Fill pdadc_out table */
+		while (pdadc_0 < max_idx)
+			pdadc_out[pdadc_i++] = pdadc_tmp[pdadc_0++];
+
+		/* Need to extrapolate above this pdgain? */
+		if (pdadc_n <= max_idx)
+			continue;
+
+		/* Force each power step to be at least 0.5 dB */
+		if ((pdadc_tmp[table_size - 1] - pdadc_tmp[table_size - 2]) > 1)
+			pwr_step = pdadc_tmp[table_size - 1] -
+						pdadc_tmp[table_size - 2];
+		else
+			pwr_step = 1;
+
+		/* Extrapolate above */
+		while ((pdadc_0 < (s16) pdadc_n) &&
+		(pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2)) {
+			s16 tmp = pdadc_tmp[table_size - 1] +
+					(pdadc_0 - max_idx) * pwr_step;
+			pdadc_out[pdadc_i++] = (tmp > 127) ? 127 : (u8) tmp;
+			pdadc_0++;
+		}
 	}
 
+	while (pdg < AR5K_EEPROM_N_PD_GAINS) {
+		gain_boundaries[pdg] = gain_boundaries[pdg - 1];
+		pdg++;
+	}
+
+	while (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2) {
+		pdadc_out[pdadc_i] = pdadc_out[pdadc_i - 1];
+		pdadc_i++;
+	}
+
+	/* Set gain boundaries */
+	ath5k_hw_reg_write(ah,
+		AR5K_REG_SM(pd_gain_overlap,
+			AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP) |
+		AR5K_REG_SM(gain_boundaries[0],
+			AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1) |
+		AR5K_REG_SM(gain_boundaries[1],
+			AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2) |
+		AR5K_REG_SM(gain_boundaries[2],
+			AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3) |
+		AR5K_REG_SM(gain_boundaries[3],
+			AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4),
+		AR5K_PHY_TPC_RG5);
+
+	/* Used for setting rate power table */
+	ah->ah_txpower.txp_min_idx = pwr_min[0];
+
+}
+
+/* Write PDADC values on hw */
+static void
+ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah,
+			u8 pdcurves, u8 *pdg_to_idx)
+{
+	u8 *pdadc_out = ah->ah_txpower.txp_pd_table;
+	u32 reg;
+	u8 i;
+
+	/* Select the right pdgain curves */
+
+	/* Clear current settings */
+	reg = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG1);
+	reg &= ~(AR5K_PHY_TPC_RG1_PDGAIN_1 |
+		AR5K_PHY_TPC_RG1_PDGAIN_2 |
+		AR5K_PHY_TPC_RG1_PDGAIN_3 |
+		AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
+
 	/*
-	 * RF2413 for some reason can't
-	 * transmit anything if we call
-	 * this funtion, so we skip it
-	 * until we fix txpower.
+	 * Use pd_gains curve from eeprom
 	 *
-	 * XXX: Assume same for RF2425
-	 * to be safe.
+	 * This overrides the default setting from initvals
+	 * in case some vendors (e.g. Zcomax) don't use the default
+	 * curves. If we don't honor their settings we 'll get a
+	 * 5dB (1 * gain overlap ?) drop.
 	 */
-	if ((ah->ah_radio == AR5K_RF2413) || (ah->ah_radio == AR5K_RF2425))
-		return 0;
+	reg |= AR5K_REG_SM(pdcurves, AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
 
-	/* Reset TX power values */
-	memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
-	ah->ah_txpower.txp_tpc = tpc;
-
-	/* Initialize TX power table */
-	ath5k_txpower_table(ah, channel, txpower);
+	switch (pdcurves) {
+	case 3:
+		reg |= AR5K_REG_SM(pdg_to_idx[2], AR5K_PHY_TPC_RG1_PDGAIN_3);
+		/* Fall through */
+	case 2:
+		reg |= AR5K_REG_SM(pdg_to_idx[1], AR5K_PHY_TPC_RG1_PDGAIN_2);
+		/* Fall through */
+	case 1:
+		reg |= AR5K_REG_SM(pdg_to_idx[0], AR5K_PHY_TPC_RG1_PDGAIN_1);
+		break;
+	}
+	ath5k_hw_reg_write(ah, reg, AR5K_PHY_TPC_RG1);
 
 	/*
 	 * Write TX power values
 	 */
 	for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
 		ath5k_hw_reg_write(ah,
-			((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) | 0xff) & 0xffff) << 16) |
-			(((ah->ah_txpower.txp_pcdac[(i << 1)    ] << 8) | 0xff) & 0xffff),
-			AR5K_PHY_PCDAC_TXPOWER(i));
+			((pdadc_out[4*i + 0] & 0xff) << 0) |
+			((pdadc_out[4*i + 1] & 0xff) << 8) |
+			((pdadc_out[4*i + 2] & 0xff) << 16) |
+			((pdadc_out[4*i + 3] & 0xff) << 24),
+			AR5K_PHY_PDADC_TXPOWER(i));
+	}
+}
+
+
+/*
+ * Common code for PCDAC/PDADC tables
+ */
+
+/*
+ * This is the main function that uses all of the above
+ * to set PCDAC/PDADC table on hw for the current channel.
+ * This table is used for tx power calibration on the basband,
+ * without it we get weird tx power levels and in some cases
+ * distorted spectral mask
+ */
+static int
+ath5k_setup_channel_powertable(struct ath5k_hw *ah,
+			struct ieee80211_channel *channel,
+			u8 ee_mode, u8 type)
+{
+	struct ath5k_pdgain_info *pdg_L, *pdg_R;
+	struct ath5k_chan_pcal_info *pcinfo_L;
+	struct ath5k_chan_pcal_info *pcinfo_R;
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode];
+	s16 table_min[AR5K_EEPROM_N_PD_GAINS];
+	s16 table_max[AR5K_EEPROM_N_PD_GAINS];
+	u8 *tmpL;
+	u8 *tmpR;
+	u32 target = channel->center_freq;
+	int pdg, i;
+
+	/* Get surounding freq piers for this channel */
+	ath5k_get_chan_pcal_surrounding_piers(ah, channel,
+						&pcinfo_L,
+						&pcinfo_R);
+
+	/* Loop over pd gain curves on
+	 * surounding freq piers by index */
+	for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) {
+
+		/* Fill curves in reverse order
+		 * from lower power (max gain)
+		 * to higher power. Use curve -> idx
+		 * backmaping we did on eeprom init */
+		u8 idx = pdg_curve_to_idx[pdg];
+
+		/* Grab the needed curves by index */
+		pdg_L = &pcinfo_L->pd_curves[idx];
+		pdg_R = &pcinfo_R->pd_curves[idx];
+
+		/* Initialize the temp tables */
+		tmpL = ah->ah_txpower.tmpL[pdg];
+		tmpR = ah->ah_txpower.tmpR[pdg];
+
+		/* Set curve's x boundaries and create
+		 * curves so that they cover the same
+		 * range (if we don't do that one table
+		 * will have values on some range and the
+		 * other one won't have any so interpolation
+		 * will fail) */
+		table_min[pdg] = min(pdg_L->pd_pwr[0],
+					pdg_R->pd_pwr[0]) / 2;
+
+		table_max[pdg] = max(pdg_L->pd_pwr[pdg_L->pd_points - 1],
+				pdg_R->pd_pwr[pdg_R->pd_points - 1]) / 2;
+
+		/* Now create the curves on surrounding channels
+		 * and interpolate if needed to get the final
+		 * curve for this gain on this channel */
+		switch (type) {
+		case AR5K_PWRTABLE_LINEAR_PCDAC:
+			/* Override min/max so that we don't loose
+			 * accuracy (don't divide by 2) */
+			table_min[pdg] = min(pdg_L->pd_pwr[0],
+						pdg_R->pd_pwr[0]);
+
+			table_max[pdg] =
+				max(pdg_L->pd_pwr[pdg_L->pd_points - 1],
+					pdg_R->pd_pwr[pdg_R->pd_points - 1]);
+
+			/* Override minimum so that we don't get
+			 * out of bounds while extrapolating
+			 * below. Don't do this when we have 2
+			 * curves and we are on the high power curve
+			 * because table_min is ok in this case */
+			if (!(ee->ee_pd_gains[ee_mode] > 1 && pdg == 0)) {
+
+				table_min[pdg] =
+					ath5k_get_linear_pcdac_min(pdg_L->pd_step,
+								pdg_R->pd_step,
+								pdg_L->pd_pwr,
+								pdg_R->pd_pwr);
+
+				/* Don't go too low because we will
+				 * miss the upper part of the curve.
+				 * Note: 126 = 31.5dB (max power supported)
+				 * in 0.25dB units */
+				if (table_max[pdg] - table_min[pdg] > 126)
+					table_min[pdg] = table_max[pdg] - 126;
+			}
+
+			/* Fall through */
+		case AR5K_PWRTABLE_PWR_TO_PCDAC:
+		case AR5K_PWRTABLE_PWR_TO_PDADC:
+
+			ath5k_create_power_curve(table_min[pdg],
+						table_max[pdg],
+						pdg_L->pd_pwr,
+						pdg_L->pd_step,
+						pdg_L->pd_points, tmpL, type);
+
+			/* We are in a calibration
+			 * pier, no need to interpolate
+			 * between freq piers */
+			if (pcinfo_L == pcinfo_R)
+				continue;
+
+			ath5k_create_power_curve(table_min[pdg],
+						table_max[pdg],
+						pdg_R->pd_pwr,
+						pdg_R->pd_step,
+						pdg_R->pd_points, tmpR, type);
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		/* Interpolate between curves
+		 * of surounding freq piers to
+		 * get the final curve for this
+		 * pd gain. Re-use tmpL for interpolation
+		 * output */
+		for (i = 0; (i < (u16) (table_max[pdg] - table_min[pdg])) &&
+		(i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) {
+			tmpL[i] = (u8) ath5k_get_interpolated_value(target,
+							(s16) pcinfo_L->freq,
+							(s16) pcinfo_R->freq,
+							(s16) tmpL[i],
+							(s16) tmpR[i]);
+		}
 	}
 
+	/* Now we have a set of curves for this
+	 * channel on tmpL (x range is table_max - table_min
+	 * and y values are tmpL[pdg][]) sorted in the same
+	 * order as EEPROM (because we've used the backmaping).
+	 * So for RF5112 it's from higher power to lower power
+	 * and for RF2413 it's from lower power to higher power.
+	 * For RF5111 we only have one curve. */
+
+	/* Fill min and max power levels for this
+	 * channel by interpolating the values on
+	 * surounding channels to complete the dataset */
+	ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target,
+					(s16) pcinfo_L->freq,
+					(s16) pcinfo_R->freq,
+					pcinfo_L->min_pwr, pcinfo_R->min_pwr);
+
+	ah->ah_txpower.txp_max_pwr = ath5k_get_interpolated_value(target,
+					(s16) pcinfo_L->freq,
+					(s16) pcinfo_R->freq,
+					pcinfo_L->max_pwr, pcinfo_R->max_pwr);
+
+	/* We are ready to go, fill PCDAC/PDADC
+	 * table and write settings on hardware */
+	switch (type) {
+	case AR5K_PWRTABLE_LINEAR_PCDAC:
+		/* For RF5112 we can have one or two curves
+		 * and each curve covers a certain power lvl
+		 * range so we need to do some more processing */
+		ath5k_combine_linear_pcdac_curves(ah, table_min, table_max,
+						ee->ee_pd_gains[ee_mode]);
+
+		/* Set txp.offset so that we can
+		 * match max power value with max
+		 * table index */
+		ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2);
+
+		/* Write settings on hw */
+		ath5k_setup_pcdac_table(ah);
+		break;
+	case AR5K_PWRTABLE_PWR_TO_PCDAC:
+		/* We are done for RF5111 since it has only
+		 * one curve, just fit the curve on the table */
+		ath5k_fill_pwr_to_pcdac_table(ah, table_min, table_max);
+
+		/* No rate powertable adjustment for RF5111 */
+		ah->ah_txpower.txp_min_idx = 0;
+		ah->ah_txpower.txp_offset = 0;
+
+		/* Write settings on hw */
+		ath5k_setup_pcdac_table(ah);
+		break;
+	case AR5K_PWRTABLE_PWR_TO_PDADC:
+		/* Set PDADC boundaries and fill
+		 * final PDADC table */
+		ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max,
+						ee->ee_pd_gains[ee_mode]);
+
+		/* Write settings on hw */
+		ath5k_setup_pwr_to_pdadc_table(ah, pdg, pdg_curve_to_idx);
+
+		/* Set txp.offset, note that table_min
+		 * can be negative */
+		ah->ah_txpower.txp_offset = table_min[0];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+/*
+ * Per-rate tx power setting
+ *
+ * This is the code that sets the desired tx power (below
+ * maximum) on hw for each rate (we also have TPC that sets
+ * power per packet). We do that by providing an index on the
+ * PCDAC/PDADC table we set up.
+ */
+
+/*
+ * Set rate power table
+ *
+ * For now we only limit txpower based on maximum tx power
+ * supported by hw (what's inside rate_info). We need to limit
+ * this even more, based on regulatory domain etc.
+ *
+ * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps)
+ * and is indexed as follows:
+ * rates[0] - rates[7] -> OFDM rates
+ * rates[8] - rates[14] -> CCK rates
+ * rates[15] -> XR rates (they all have the same power)
+ */
+static void
+ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
+			struct ath5k_rate_pcal_info *rate_info,
+			u8 ee_mode)
+{
+	unsigned int i;
+	u16 *rates;
+
+	/* max_pwr is power level we got from driver/user in 0.5dB
+	 * units, switch to 0.25dB units so we can compare */
+	max_pwr *= 2;
+	max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max_pwr) / 2;
+
+	/* apply rate limits */
+	rates = ah->ah_txpower.txp_rates_power_table;
+
+	/* OFDM rates 6 to 24Mb/s */
+	for (i = 0; i < 5; i++)
+		rates[i] = min(max_pwr, rate_info->target_power_6to24);
+
+	/* Rest OFDM rates */
+	rates[5] = min(rates[0], rate_info->target_power_36);
+	rates[6] = min(rates[0], rate_info->target_power_48);
+	rates[7] = min(rates[0], rate_info->target_power_54);
+
+	/* CCK rates */
+	/* 1L */
+	rates[8] = min(rates[0], rate_info->target_power_6to24);
+	/* 2L */
+	rates[9] = min(rates[0], rate_info->target_power_36);
+	/* 2S */
+	rates[10] = min(rates[0], rate_info->target_power_36);
+	/* 5L */
+	rates[11] = min(rates[0], rate_info->target_power_48);
+	/* 5S */
+	rates[12] = min(rates[0], rate_info->target_power_48);
+	/* 11L */
+	rates[13] = min(rates[0], rate_info->target_power_54);
+	/* 11S */
+	rates[14] = min(rates[0], rate_info->target_power_54);
+
+	/* XR rates */
+	rates[15] = min(rates[0], rate_info->target_power_6to24);
+
+	/* CCK rates have different peak to average ratio
+	 * so we have to tweak their power so that gainf
+	 * correction works ok. For this we use OFDM to
+	 * CCK delta from eeprom */
+	if ((ee_mode == AR5K_EEPROM_MODE_11G) &&
+	(ah->ah_phy_revision < AR5K_SREV_PHY_5212A))
+		for (i = 8; i <= 15; i++)
+			rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta;
+
+	ah->ah_txpower.txp_min_pwr = rates[7];
+	ah->ah_txpower.txp_max_pwr = rates[0];
+	ah->ah_txpower.txp_ofdm = rates[7];
+}
+
+
+/*
+ * Set transmition power
+ */
+int
+ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+		u8 ee_mode, u8 txpower)
+{
+	struct ath5k_rate_pcal_info rate_info;
+	u8 type;
+	int ret;
+
+	ATH5K_TRACE(ah->ah_sc);
+	if (txpower > AR5K_TUNE_MAX_TXPOWER) {
+		ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
+		return -EINVAL;
+	}
+	if (txpower == 0)
+		txpower = AR5K_TUNE_DEFAULT_TXPOWER;
+
+	/* Reset TX power values */
+	memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
+	ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+	ah->ah_txpower.txp_min_pwr = 0;
+	ah->ah_txpower.txp_max_pwr = AR5K_TUNE_MAX_TXPOWER;
+
+	/* Initialize TX power table */
+	switch (ah->ah_radio) {
+	case AR5K_RF5111:
+		type = AR5K_PWRTABLE_PWR_TO_PCDAC;
+		break;
+	case AR5K_RF5112:
+		type = AR5K_PWRTABLE_LINEAR_PCDAC;
+		break;
+	case AR5K_RF2413:
+	case AR5K_RF5413:
+	case AR5K_RF2316:
+	case AR5K_RF2317:
+	case AR5K_RF2425:
+		type = AR5K_PWRTABLE_PWR_TO_PDADC;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* FIXME: Only on channel/mode change */
+	ret = ath5k_setup_channel_powertable(ah, channel, ee_mode, type);
+	if (ret)
+		return ret;
+
+	/* Limit max power if we have a CTL available */
+	ath5k_get_max_ctl_power(ah, channel);
+
+	/* FIXME: Tx power limit for this regdomain
+	 * XXX: Mac80211/CRDA will do that anyway ? */
+
+	/* FIXME: Antenna reduction stuff */
+
+	/* FIXME: Limit power on turbo modes */
+
+	/* FIXME: TPC scale reduction */
+
+	/* Get surounding channels for per-rate power table
+	 * calibration */
+	ath5k_get_rate_pcal_data(ah, channel, &rate_info);
+
+	/* Setup rate power table */
+	ath5k_setup_rate_powertable(ah, txpower, &rate_info, ee_mode);
+
+	/* Write rate power table on hw */
 	ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) |
 		AR5K_TXPOWER_OFDM(2, 16) | AR5K_TXPOWER_OFDM(1, 8) |
 		AR5K_TXPOWER_OFDM(0, 0), AR5K_PHY_TXPOWER_RATE1);
@@ -1536,26 +2566,34 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 		AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) |
 		AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4);
 
-	if (ah->ah_txpower.txp_tpc)
+	/* FIXME: TPC support */
+	if (ah->ah_txpower.txp_tpc) {
 		ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE |
 			AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
-	else
+
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_ACK) |
+			AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CTS) |
+			AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP),
+			AR5K_TPC);
+	} else {
 		ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX |
 			AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
+	}
 
 	return 0;
 }
 
-int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power)
+int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower)
 {
 	/*Just a try M.F.*/
 	struct ieee80211_channel *channel = &ah->ah_current_channel;
 
 	ATH5K_TRACE(ah->ah_sc);
 	ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
-		"changing txpower to %d\n", power);
+		"changing txpower to %d\n", txpower);
 
-	return ath5k_hw_txpower(ah, channel, power);
+	return ath5k_hw_txpower(ah, channel, mode, txpower);
 }
 
 #undef _ATH5K_PHY
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 2dc008e10226..7070d1543cdc 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -1554,6 +1554,19 @@
 /*===5212 Specific PCU registers===*/
 
 /*
+ * Transmit power control register
+ */
+#define AR5K_TPC			0x80e8
+#define AR5K_TPC_ACK			0x0000003f	/* ack frames */
+#define AR5K_TPC_ACK_S			0
+#define AR5K_TPC_CTS			0x00003f00	/* cts frames */
+#define AR5K_TPC_CTS_S			8
+#define AR5K_TPC_CHIRP			0x003f0000	/* chirp frames */
+#define AR5K_TPC_CHIRP_S		16
+#define AR5K_TPC_DOPPLER		0x0f000000	/* doppler chirp span */
+#define AR5K_TPC_DOPPLER_S		24
+
+/*
  * XR (eXtended Range) mode register
  */
 #define AR5K_XRMODE			0x80c0			/* Register Address */
@@ -2550,6 +2563,12 @@
 #define	AR5K_PHY_TPC_RG1		0xa258
 #define	AR5K_PHY_TPC_RG1_NUM_PD_GAIN	0x0000c000
 #define	AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S	14
+#define AR5K_PHY_TPC_RG1_PDGAIN_1	0x00030000
+#define AR5K_PHY_TPC_RG1_PDGAIN_1_S	16
+#define AR5K_PHY_TPC_RG1_PDGAIN_2	0x000c0000
+#define AR5K_PHY_TPC_RG1_PDGAIN_2_S	18
+#define AR5K_PHY_TPC_RG1_PDGAIN_3	0x00300000
+#define AR5K_PHY_TPC_RG1_PDGAIN_3_S	20
 
 #define	AR5K_PHY_TPC_RG5			0xa26C
 #define	AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP	0x0000000F
diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c
index 685dc213edae..7a17d31b2fd9 100644
--- a/drivers/net/wireless/ath5k/reset.c
+++ b/drivers/net/wireless/ath5k/reset.c
@@ -664,29 +664,35 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 		struct ieee80211_channel *channel, u8 *ant, u8 ee_mode)
 {
 	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	s16 cck_ofdm_pwr_delta;
 
-	/* Set CCK to OFDM power delta */
-	if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
-		int16_t cck_ofdm_pwr_delta;
-
-		/* Adjust power delta for channel 14 */
-		if (channel->center_freq == 2484)
-			cck_ofdm_pwr_delta =
-				((ee->ee_cck_ofdm_power_delta -
-				ee->ee_scaled_cck_delta) * 2) / 10;
-		else
-			cck_ofdm_pwr_delta =
-				(ee->ee_cck_ofdm_power_delta * 2) / 10;
+	/* Adjust power delta for channel 14 */
+	if (channel->center_freq == 2484)
+		cck_ofdm_pwr_delta =
+			((ee->ee_cck_ofdm_power_delta -
+			ee->ee_scaled_cck_delta) * 2) / 10;
+	else
+		cck_ofdm_pwr_delta =
+			(ee->ee_cck_ofdm_power_delta * 2) / 10;
 
+	/* Set CCK to OFDM power delta on tx power
+	 * adjustment register */
+	if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
 		if (channel->hw_value == CHANNEL_G)
 			ath5k_hw_reg_write(ah,
-			AR5K_REG_SM((ee->ee_cck_ofdm_power_delta * -1),
+			AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1),
 				AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) |
 			AR5K_REG_SM((cck_ofdm_pwr_delta * -1),
 				AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX),
 				AR5K_PHY_TX_PWR_ADJ);
 		else
 			ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ);
+	} else {
+		/* For older revs we scale power on sw during tx power
+		 * setup */
+		ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta;
+		ah->ah_txpower.txp_cck_ofdm_gainf_delta =
+						ee->ee_cck_ofdm_gain_delta;
 	}
 
 	/* Set antenna idle switch table */
@@ -994,7 +1000,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		/*
 		 * Set TX power (FIXME)
 		 */
-		ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER);
+		ret = ath5k_hw_txpower(ah, channel, ee_mode,
+					AR5K_TUNE_DEFAULT_TXPOWER);
 		if (ret)
 			return ret;
 
diff --git a/drivers/net/wireless/ath9k/ahb.c b/drivers/net/wireless/ath9k/ahb.c
index 00cc7bb01f2e..0e65c51ba176 100644
--- a/drivers/net/wireless/ath9k/ahb.c
+++ b/drivers/net/wireless/ath9k/ahb.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
  * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
  *
diff --git a/drivers/net/wireless/ath9k/ani.c b/drivers/net/wireless/ath9k/ani.c
index a39eb760cbb7..6c5e887d50d7 100644
--- a/drivers/net/wireless/ath9k/ani.c
+++ b/drivers/net/wireless/ath9k/ani.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/ani.h b/drivers/net/wireless/ath9k/ani.h
index 7315761f6d74..08b4e7ed5ff0 100644
--- a/drivers/net/wireless/ath9k/ani.h
+++ b/drivers/net/wireless/ath9k/ani.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h
index b64be8e9a690..2689a08a2844 100644
--- a/drivers/net/wireless/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath9k/ath9k.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -295,13 +295,9 @@ struct ath_tx_control {
 	enum ath9k_internal_frame_type frame_type;
 };
 
-struct ath_xmit_status {
-	int retries;
-	int flags;
 #define ATH_TX_ERROR        0x01
 #define ATH_TX_XRETRY       0x02
 #define ATH_TX_BAR          0x04
-};
 
 /* All RSSI values are noise floor adjusted */
 struct ath_tx_stat {
@@ -390,6 +386,7 @@ void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid
 
 struct ath_vif {
 	int av_bslot;
+	__le64 tsf_adjust; /* TSF adjustment for staggered beacons */
 	enum nl80211_iftype av_opmode;
 	struct ath_buf *av_bcbuf;
 	struct ath_tx_control av_btxctl;
@@ -406,7 +403,7 @@ struct ath_vif {
  * number of beacon intervals, the game's up.
  */
 #define BSTUCK_THRESH           	(9 * ATH_BCBUF)
-#define	ATH_BCBUF               	1
+#define	ATH_BCBUF               	4
 #define ATH_DEFAULT_BINTVAL     	100 /* TU */
 #define ATH_DEFAULT_BMISS_LIMIT 	10
 #define IEEE80211_MS_TO_TU(x)           (((x) * 1000) / 1024)
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c
index 039c78136c50..ec995730632d 100644
--- a/drivers/net/wireless/ath9k/beacon.c
+++ b/drivers/net/wireless/ath9k/beacon.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -70,7 +70,8 @@ static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
 	ds = bf->bf_desc;
 	flags = ATH9K_TXDESC_NOACK;
 
-	if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC &&
+	if (((sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
+	     (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) &&
 	    (ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
 		ds->ds_link = bf->bf_daddr; /* self-linked */
 		flags |= ATH9K_TXDESC_VEOL;
@@ -153,6 +154,8 @@ static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw,
 	bf->bf_mpdu = skb;
 	if (skb == NULL)
 		return NULL;
+	((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp =
+		avp->tsf_adjust;
 
 	info = IEEE80211_SKB_CB(skb);
 	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
@@ -253,7 +256,6 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 {
 	struct ath_softc *sc = aphy->sc;
 	struct ath_vif *avp;
-	struct ieee80211_hdr *hdr;
 	struct ath_buf *bf;
 	struct sk_buff *skb;
 	__le64 tstamp;
@@ -316,42 +318,33 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 
 	tstamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
 	sc->beacon.bc_tstamp = le64_to_cpu(tstamp);
-
-	/*
-	 * Calculate a TSF adjustment factor required for
-	 * staggered beacons.  Note that we assume the format
-	 * of the beacon frame leaves the tstamp field immediately
-	 * following the header.
-	 */
+	/* Calculate a TSF adjustment factor required for staggered beacons. */
 	if (avp->av_bslot > 0) {
 		u64 tsfadjust;
-		__le64 val;
 		int intval;
 
 		intval = sc->hw->conf.beacon_int ?
 			sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
 
 		/*
-		 * The beacon interval is in TU's; the TSF in usecs.
-		 * We figure out how many TU's to add to align the
-		 * timestamp then convert to TSF units and handle
-		 * byte swapping before writing it in the frame.
-		 * The hardware will then add this each time a beacon
-		 * frame is sent.  Note that we align vif's 1..N
-		 * and leave vif 0 untouched.  This means vap 0
-		 * has a timestamp in one beacon interval while the
-		 * others get a timestamp aligned to the next interval.
+		 * Calculate the TSF offset for this beacon slot, i.e., the
+		 * number of usecs that need to be added to the timestamp field
+		 * in Beacon and Probe Response frames. Beacon slot 0 is
+		 * processed at the correct offset, so it does not require TSF
+		 * adjustment. Other slots are adjusted to get the timestamp
+		 * close to the TBTT for the BSS.
 		 */
-		tsfadjust = (intval * (ATH_BCBUF - avp->av_bslot)) / ATH_BCBUF;
-		val = cpu_to_le64(tsfadjust << 10);     /* TU->TSF */
+		tsfadjust = intval * avp->av_bslot / ATH_BCBUF;
+		avp->tsf_adjust = cpu_to_le64(TU_TO_USEC(tsfadjust));
 
 		DPRINTF(sc, ATH_DBG_BEACON,
 			"stagger beacons, bslot %d intval %u tsfadjust %llu\n",
 			avp->av_bslot, intval, (unsigned long long)tsfadjust);
 
-		hdr = (struct ieee80211_hdr *)skb->data;
-		memcpy(&hdr[1], &val, sizeof(val));
-	}
+		((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp =
+			avp->tsf_adjust;
+	} else
+		avp->tsf_adjust = cpu_to_le64(0);
 
 	bf->bf_mpdu = skb;
 	bf->bf_buf_addr = bf->bf_dmacontext =
@@ -447,8 +440,16 @@ void ath_beacon_tasklet(unsigned long data)
 	tsf = ath9k_hw_gettsf64(ah);
 	tsftu = TSF_TO_TU(tsf>>32, tsf);
 	slot = ((tsftu % intval) * ATH_BCBUF) / intval;
-	vif = sc->beacon.bslot[(slot + 1) % ATH_BCBUF];
-	aphy = sc->beacon.bslot_aphy[(slot + 1) % ATH_BCBUF];
+	/*
+	 * Reverse the slot order to get slot 0 on the TBTT offset that does
+	 * not require TSF adjustment and other slots adding
+	 * slot/ATH_BCBUF * beacon_int to timestamp. For example, with
+	 * ATH_BCBUF = 4, we process beacon slots as follows: 3 2 1 0 3 2 1 ..
+	 * and slot 0 is at correct offset to TBTT.
+	 */
+	slot = ATH_BCBUF - slot - 1;
+	vif = sc->beacon.bslot[slot];
+	aphy = sc->beacon.bslot_aphy[slot];
 
 	DPRINTF(sc, ATH_DBG_BEACON,
 		"slot %d [tsf %llu tsftu %u intval %u] vif %p\n",
@@ -728,6 +729,7 @@ void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
 			ath_beacon_config_ap(sc, &conf, avp);
 			break;
 		case NL80211_IFTYPE_ADHOC:
+		case NL80211_IFTYPE_MESH_POINT:
 			ath_beacon_config_adhoc(sc, &conf, avp, vif);
 			break;
 		case NL80211_IFTYPE_STATION:
diff --git a/drivers/net/wireless/ath9k/calib.c b/drivers/net/wireless/ath9k/calib.c
index c9446fb6b153..e2d62e97131c 100644
--- a/drivers/net/wireless/ath9k/calib.c
+++ b/drivers/net/wireless/ath9k/calib.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/calib.h b/drivers/net/wireless/ath9k/calib.h
index 32589e0c5018..1c74bd50700d 100644
--- a/drivers/net/wireless/ath9k/calib.h
+++ b/drivers/net/wireless/ath9k/calib.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/debug.c b/drivers/net/wireless/ath9k/debug.c
index 82573cadb1ab..fdf9528fa49b 100644
--- a/drivers/net/wireless/ath9k/debug.c
+++ b/drivers/net/wireless/ath9k/debug.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/debug.h b/drivers/net/wireless/ath9k/debug.h
index 065268b8568f..7b0e5419d2bc 100644
--- a/drivers/net/wireless/ath9k/debug.h
+++ b/drivers/net/wireless/ath9k/debug.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/eeprom.c b/drivers/net/wireless/ath9k/eeprom.c
index 183c949bcca1..ffc36b0361c7 100644
--- a/drivers/net/wireless/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath9k/eeprom.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -342,8 +342,7 @@ static int ath9k_hw_4k_get_eeprom_rev(struct ath_hw *ah)
 static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah)
 {
 #define SIZE_EEPROM_4K (sizeof(struct ar5416_eeprom_4k) / sizeof(u16))
-	struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
-	u16 *eep_data;
+	u16 *eep_data = (u16 *)&ah->eeprom.map4k;
 	int addr, eep_start_loc = 0;
 
 	eep_start_loc = 64;
@@ -353,8 +352,6 @@ static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah)
 			"Reading from EEPROM, not flash\n");
 	}
 
-	eep_data = (u16 *)eep;
-
 	for (addr = 0; addr < SIZE_EEPROM_4K; addr++) {
 		if (!ath9k_hw_nvram_read(ah, addr + eep_start_loc, eep_data)) {
 			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
@@ -363,6 +360,7 @@ static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah)
 		}
 		eep_data++;
 	}
+
 	return true;
 #undef SIZE_EEPROM_4K
 }
@@ -379,16 +377,15 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 
 
 	if (!ath9k_hw_use_flash(ah)) {
-
 		if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET,
 					 &magic)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 				"Reading Magic # failed\n");
 			return false;
 		}
 
 		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-				"Read Magic = 0x%04X\n", magic);
+			"Read Magic = 0x%04X\n", magic);
 
 		if (magic != AR5416_EEPROM_MAGIC) {
 			magic2 = swab16(magic);
@@ -401,16 +398,9 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 					temp = swab16(*eepdata);
 					*eepdata = temp;
 					eepdata++;
-
-					DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-						"0x%04X  ", *eepdata);
-
-					if (((addr + 1) % 6) == 0)
-						DPRINTF(ah->ah_sc,
-							ATH_DBG_EEPROM, "\n");
 				}
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 					"Invalid EEPROM Magic. "
 					"endianness mismatch.\n");
 				return -EINVAL;
@@ -426,7 +416,7 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 	else
 		el = ah->eeprom.map4k.baseEepHeader.length;
 
-	if (el > sizeof(struct ar5416_eeprom_def))
+	if (el > sizeof(struct ar5416_eeprom_4k))
 		el = sizeof(struct ar5416_eeprom_4k) / sizeof(u16);
 	else
 		el = el / sizeof(u16);
@@ -441,7 +431,7 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 		u16 word;
 
 		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"EEPROM Endianness is not native.. Changing \n");
+			"EEPROM Endianness is not native.. Changing\n");
 
 		word = swab16(eep->baseEepHeader.length);
 		eep->baseEepHeader.length = word;
@@ -483,7 +473,7 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 
 	if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
 	    ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"Bad EEPROM checksum 0x%x or revision 0x%04x\n",
 			sum, ah->eep_ops->get_eeprom_ver(ah));
 		return -EINVAL;
@@ -1203,57 +1193,63 @@ static void ath9k_hw_4k_set_addac(struct ath_hw *ah,
 	}
 }
 
-static bool ath9k_hw_4k_set_board_values(struct ath_hw *ah,
-					 struct ath9k_channel *chan)
+static void ath9k_hw_4k_set_gain(struct ath_hw *ah,
+				 struct modal_eep_4k_header *pModal,
+				 struct ar5416_eeprom_4k *eep,
+				 u8 txRxAttenLocal, int regChainOffset)
 {
-	struct modal_eep_4k_header *pModal;
-	struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
-	int regChainOffset;
-	u8 txRxAttenLocal;
-	u8 ob[5], db1[5], db2[5];
-	u8 ant_div_control1, ant_div_control2;
-	u32 regVal;
-
-
-	pModal = &eep->modalHeader;
-
-	txRxAttenLocal = 23;
-
-	REG_WRITE(ah, AR_PHY_SWITCH_COM,
-		  ah->eep_ops->get_eeprom_antenna_cfg(ah, chan));
-
-	regChainOffset = 0;
 	REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset,
 		  pModal->antCtrlChain[0]);
 
 	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset,
-		 (REG_READ(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset) &
-		 ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
-		 AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
-		 SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
-		 SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
+		  (REG_READ(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset) &
+		   ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
+		     AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
+		  SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
+		  SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
 
 	if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
-			AR5416_EEP_MINOR_VER_3) {
+	    AR5416_EEP_MINOR_VER_3) {
 		txRxAttenLocal = pModal->txRxAttenCh[0];
+
 		REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-			AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN, pModal->bswMargin[0]);
+			      AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN, pModal->bswMargin[0]);
 		REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-			AR_PHY_GAIN_2GHZ_XATTEN1_DB, pModal->bswAtten[0]);
+			      AR_PHY_GAIN_2GHZ_XATTEN1_DB, pModal->bswAtten[0]);
 		REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-			AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
-			pModal->xatten2Margin[0]);
+			      AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
+			      pModal->xatten2Margin[0]);
 		REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
-			AR_PHY_GAIN_2GHZ_XATTEN2_DB, pModal->xatten2Db[0]);
+			      AR_PHY_GAIN_2GHZ_XATTEN2_DB, pModal->xatten2Db[0]);
 	}
 
 	REG_RMW_FIELD(ah, AR_PHY_RXGAIN + regChainOffset,
-			AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
+		      AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
 	REG_RMW_FIELD(ah, AR_PHY_RXGAIN + regChainOffset,
-			AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[0]);
+		      AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[0]);
 
 	if (AR_SREV_9285_11(ah))
 		REG_WRITE(ah, AR9285_AN_TOP4, (AR9285_AN_TOP4_DEFAULT | 0x14));
+}
+
+static void ath9k_hw_4k_set_board_values(struct ath_hw *ah,
+					 struct ath9k_channel *chan)
+{
+	struct modal_eep_4k_header *pModal;
+	struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
+	u8 txRxAttenLocal;
+	u8 ob[5], db1[5], db2[5];
+	u8 ant_div_control1, ant_div_control2;
+	u32 regVal;
+
+	pModal = &eep->modalHeader;
+	txRxAttenLocal = 23;
+
+	REG_WRITE(ah, AR_PHY_SWITCH_COM,
+		  ah->eep_ops->get_eeprom_antenna_cfg(ah, chan));
+
+	/* Single chain for 4K EEPROM*/
+	ath9k_hw_4k_set_gain(ah, pModal, eep, txRxAttenLocal, 0);
 
 	/* Initialize Ant Diversity settings from EEPROM */
 	if (pModal->version == 3) {
@@ -1295,9 +1291,6 @@ static bool ath9k_hw_4k_set_board_values(struct ath_hw *ah,
 		db2[4] = ((pModal->db2_234 >> 8) & 0xf);
 
 	} else if (pModal->version == 1) {
-
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"EEPROM Model version is set to 1 \n");
 		ob[0] = (pModal->ob_01 & 0xf);
 		ob[1] = ob[2] = ob[3] = ob[4] = (pModal->ob_01 >> 4) & 0xf;
 		db1[0] = (pModal->db1_01 & 0xf);
@@ -1385,8 +1378,6 @@ static bool ath9k_hw_4k_set_board_values(struct ath_hw *ah,
 				      AR_PHY_SETTLING_SWITCH,
 				      pModal->swSettleHt40);
 	}
-
-	return true;
 }
 
 static u16 ath9k_hw_4k_get_eeprom_antenna_cfg(struct ath_hw *ah,
@@ -1464,16 +1455,13 @@ static int ath9k_hw_def_get_eeprom_rev(struct ath_hw *ah)
 static bool ath9k_hw_def_fill_eeprom(struct ath_hw *ah)
 {
 #define SIZE_EEPROM_DEF (sizeof(struct ar5416_eeprom_def) / sizeof(u16))
-	struct ar5416_eeprom_def *eep = &ah->eeprom.def;
-	u16 *eep_data;
+	u16 *eep_data = (u16 *)&ah->eeprom.def;
 	int addr, ar5416_eep_start_loc = 0x100;
 
-	eep_data = (u16 *)eep;
-
 	for (addr = 0; addr < SIZE_EEPROM_DEF; addr++) {
 		if (!ath9k_hw_nvram_read(ah, addr + ar5416_eep_start_loc,
 					 eep_data)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 				"Unable to read eeprom region\n");
 			return false;
 		}
@@ -1492,17 +1480,14 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
 	bool need_swap = false;
 	int i, addr, size;
 
-	if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET,
-				 &magic)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Reading Magic # failed\n");
+	if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Reading Magic # failed\n");
 		return false;
 	}
 
 	if (!ath9k_hw_use_flash(ah)) {
-
 		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-				"Read Magic = 0x%04X\n", magic);
+			"Read Magic = 0x%04X\n", magic);
 
 		if (magic != AR5416_EEPROM_MAGIC) {
 			magic2 = swab16(magic);
@@ -1516,18 +1501,11 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
 					temp = swab16(*eepdata);
 					*eepdata = temp;
 					eepdata++;
-
-					DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-						"0x%04X  ", *eepdata);
-
-					if (((addr + 1) % 6) == 0)
-						DPRINTF(ah->ah_sc,
-							ATH_DBG_EEPROM, "\n");
 				}
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 					"Invalid EEPROM Magic. "
-					"endianness mismatch.\n");
+					"Endianness mismatch.\n");
 				return -EINVAL;
 			}
 		}
@@ -1556,7 +1534,7 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
 		u16 word;
 
 		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"EEPROM Endianness is not native.. Changing \n");
+			"EEPROM Endianness is not native.. Changing.\n");
 
 		word = swab16(eep->baseEepHeader.length);
 		eep->baseEepHeader.length = word;
@@ -1602,7 +1580,7 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
 
 	if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
 	    ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"Bad EEPROM checksum 0x%x or revision 0x%04x\n",
 			sum, ah->eep_ops->get_eeprom_ver(ah));
 		return -EINVAL;
@@ -1614,7 +1592,6 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
 static u32 ath9k_hw_def_get_eeprom(struct ath_hw *ah,
 				   enum eeprom_param param)
 {
-#define AR5416_VER_MASK (pBase->version & AR5416_EEP_VER_MINOR_MASK)
 	struct ar5416_eeprom_def *eep = &ah->eeprom.def;
 	struct modal_eep_header *pModal = eep->modalHeader;
 	struct base_eep_header *pBase = &eep->baseEepHeader;
@@ -1681,21 +1658,73 @@ static u32 ath9k_hw_def_get_eeprom(struct ath_hw *ah,
 	default:
 		return 0;
 	}
-#undef AR5416_VER_MASK
 }
 
-/* XXX: Clean me up, make me more legible */
-static bool ath9k_hw_def_set_board_values(struct ath_hw *ah,
+static void ath9k_hw_def_set_gain(struct ath_hw *ah,
+				  struct modal_eep_header *pModal,
+				  struct ar5416_eeprom_def *eep,
+				  u8 txRxAttenLocal, int regChainOffset, int i)
+{
+	if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) {
+		txRxAttenLocal = pModal->txRxAttenCh[i];
+
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+			      AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN,
+			      pModal->bswMargin[i]);
+			REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+			      AR_PHY_GAIN_2GHZ_XATTEN1_DB,
+			      pModal->bswAtten[i]);
+			REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+			      AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
+			      pModal->xatten2Margin[i]);
+			REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+			      AR_PHY_GAIN_2GHZ_XATTEN2_DB,
+			      pModal->xatten2Db[i]);
+		} else {
+			REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+			  (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
+			   ~AR_PHY_GAIN_2GHZ_BSW_MARGIN)
+			  | SM(pModal-> bswMargin[i],
+			       AR_PHY_GAIN_2GHZ_BSW_MARGIN));
+			REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+			  (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
+			   ~AR_PHY_GAIN_2GHZ_BSW_ATTEN)
+			  | SM(pModal->bswAtten[i],
+			       AR_PHY_GAIN_2GHZ_BSW_ATTEN));
+		}
+	}
+
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		REG_RMW_FIELD(ah,
+		      AR_PHY_RXGAIN + regChainOffset,
+		      AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
+		REG_RMW_FIELD(ah,
+		      AR_PHY_RXGAIN + regChainOffset,
+		      AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[i]);
+	} else {
+		REG_WRITE(ah,
+			  AR_PHY_RXGAIN + regChainOffset,
+			  (REG_READ(ah, AR_PHY_RXGAIN + regChainOffset) &
+			   ~AR_PHY_RXGAIN_TXRX_ATTEN)
+			  | SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN));
+		REG_WRITE(ah,
+			  AR_PHY_GAIN_2GHZ + regChainOffset,
+			  (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
+			   ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) |
+			  SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN));
+	}
+}
+
+static void ath9k_hw_def_set_board_values(struct ath_hw *ah,
 					  struct ath9k_channel *chan)
 {
-#define AR5416_VER_MASK (eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK)
 	struct modal_eep_header *pModal;
 	struct ar5416_eeprom_def *eep = &ah->eeprom.def;
 	int i, regChainOffset;
 	u8 txRxAttenLocal;
 
 	pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
-
 	txRxAttenLocal = IS_CHAN_2GHZ(chan) ? 23 : 44;
 
 	REG_WRITE(ah, AR_PHY_SWITCH_COM,
@@ -1708,8 +1737,7 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah,
 		}
 
 		if (AR_SREV_5416_20_OR_LATER(ah) &&
-		    (ah->rxchainmask == 5 || ah->txchainmask == 5)
-		    && (i != 0))
+		    (ah->rxchainmask == 5 || ah->txchainmask == 5) && (i != 0))
 			regChainOffset = (i == 1) ? 0x2000 : 0x1000;
 		else
 			regChainOffset = i * 0x1000;
@@ -1718,9 +1746,7 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah,
 			  pModal->antCtrlChain[i]);
 
 		REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset,
-			  (REG_READ(ah,
-				    AR_PHY_TIMING_CTRL4(0) +
-				    regChainOffset) &
+			  (REG_READ(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset) &
 			   ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
 			     AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
 			  SM(pModal->iqCalICh[i],
@@ -1728,87 +1754,9 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah,
 			  SM(pModal->iqCalQCh[i],
 			     AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
 
-		if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah)) {
-			if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) {
-				txRxAttenLocal = pModal->txRxAttenCh[i];
-				if (AR_SREV_9280_10_OR_LATER(ah)) {
-					REG_RMW_FIELD(ah,
-						AR_PHY_GAIN_2GHZ +
-						regChainOffset,
-						AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN,
-						pModal->
-						bswMargin[i]);
-					REG_RMW_FIELD(ah,
-						AR_PHY_GAIN_2GHZ +
-						regChainOffset,
-						AR_PHY_GAIN_2GHZ_XATTEN1_DB,
-						pModal->
-						bswAtten[i]);
-					REG_RMW_FIELD(ah,
-						AR_PHY_GAIN_2GHZ +
-						regChainOffset,
-						AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
-						pModal->
-						xatten2Margin[i]);
-					REG_RMW_FIELD(ah,
-						AR_PHY_GAIN_2GHZ +
-						regChainOffset,
-						AR_PHY_GAIN_2GHZ_XATTEN2_DB,
-						pModal->
-						xatten2Db[i]);
-				} else {
-					REG_WRITE(ah,
-						  AR_PHY_GAIN_2GHZ +
-						  regChainOffset,
-						  (REG_READ(ah,
-							    AR_PHY_GAIN_2GHZ +
-							    regChainOffset) &
-						   ~AR_PHY_GAIN_2GHZ_BSW_MARGIN)
-						  | SM(pModal->
-						  bswMargin[i],
-						  AR_PHY_GAIN_2GHZ_BSW_MARGIN));
-					REG_WRITE(ah,
-						  AR_PHY_GAIN_2GHZ +
-						  regChainOffset,
-						  (REG_READ(ah,
-							    AR_PHY_GAIN_2GHZ +
-							    regChainOffset) &
-						   ~AR_PHY_GAIN_2GHZ_BSW_ATTEN)
-						  | SM(pModal->bswAtten[i],
-						  AR_PHY_GAIN_2GHZ_BSW_ATTEN));
-				}
-			}
-			if (AR_SREV_9280_10_OR_LATER(ah)) {
-				REG_RMW_FIELD(ah,
-					      AR_PHY_RXGAIN +
-					      regChainOffset,
-					      AR9280_PHY_RXGAIN_TXRX_ATTEN,
-					      txRxAttenLocal);
-				REG_RMW_FIELD(ah,
-					      AR_PHY_RXGAIN +
-					      regChainOffset,
-					      AR9280_PHY_RXGAIN_TXRX_MARGIN,
-					      pModal->rxTxMarginCh[i]);
-			} else {
-				REG_WRITE(ah,
-					  AR_PHY_RXGAIN + regChainOffset,
-					  (REG_READ(ah,
-						    AR_PHY_RXGAIN +
-						    regChainOffset) &
-					   ~AR_PHY_RXGAIN_TXRX_ATTEN) |
-					  SM(txRxAttenLocal,
-					     AR_PHY_RXGAIN_TXRX_ATTEN));
-				REG_WRITE(ah,
-					  AR_PHY_GAIN_2GHZ +
-					  regChainOffset,
-					  (REG_READ(ah,
-						    AR_PHY_GAIN_2GHZ +
-						    regChainOffset) &
-					   ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) |
-					  SM(pModal->rxTxMarginCh[i],
-					     AR_PHY_GAIN_2GHZ_RXTX_MARGIN));
-			}
-		}
+		if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah))
+			ath9k_hw_def_set_gain(ah, pModal, eep, txRxAttenLocal,
+					      regChainOffset, i);
 	}
 
 	if (AR_SREV_9280_10_OR_LATER(ah)) {
@@ -1855,8 +1803,6 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah,
 					  AR_AN_TOP2_LOCALBIAS,
 					  AR_AN_TOP2_LOCALBIAS_S,
 					  pModal->local_bias);
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "ForceXPAon: %d\n",
-			pModal->force_xpaon);
 		REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
 			      pModal->force_xpaon);
 	}
@@ -1882,6 +1828,7 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah,
 
 	REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
 		      pModal->txEndToRxOn);
+
 	if (AR_SREV_9280_10_OR_LATER(ah)) {
 		REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62,
 			      pModal->thresh62);
@@ -1912,10 +1859,10 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah,
 	}
 
 	if (AR_SREV_9280_20_OR_LATER(ah) &&
-			AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_19)
+	    AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_19)
 		REG_RMW_FIELD(ah, AR_PHY_CCK_TX_CTRL,
-				AR_PHY_CCK_TX_CTRL_TX_DAC_SCALE_CCK,
-				pModal->miscBits);
+			      AR_PHY_CCK_TX_CTRL_TX_DAC_SCALE_CCK,
+			      pModal->miscBits);
 
 
 	if (AR_SREV_9280_20(ah) && AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_20) {
@@ -1926,18 +1873,15 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah,
 			REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE, 0);
 		else
 			REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE,
-					eep->baseEepHeader.dacLpMode);
+				      eep->baseEepHeader.dacLpMode);
 
 		REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, AR_PHY_FRAME_CTL_TX_CLIP,
-				pModal->miscBits >> 2);
+			      pModal->miscBits >> 2);
 
 		REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL9,
-				AR_PHY_TX_DESIRED_SCALE_CCK,
-				eep->baseEepHeader.desiredScaleCCK);
+			      AR_PHY_TX_DESIRED_SCALE_CCK,
+			      eep->baseEepHeader.desiredScaleCCK);
 	}
-
-	return true;
-#undef AR5416_VER_MASK
 }
 
 static void ath9k_hw_def_set_addac(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath9k/eeprom.h b/drivers/net/wireless/ath9k/eeprom.h
index d6f6108f63c7..25b68c881ff1 100644
--- a/drivers/net/wireless/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath9k/eeprom.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -95,6 +95,7 @@
 #define FREQ2FBIN(x, y)		((y) ? ((x) - 2300) : (((x) - 4800) / 5))
 #define ath9k_hw_use_flash(_ah)	(!(_ah->ah_flags & AH_USE_EEPROM))
 
+#define AR5416_VER_MASK (eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK)
 #define OLC_FOR_AR9280_20_LATER (AR_SREV_9280_20_OR_LATER(ah) && \
 				 ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
 
@@ -489,7 +490,7 @@ struct eeprom_ops {
 	u8 (*get_num_ant_config)(struct ath_hw *hw, enum ieee80211_band band);
 	u16 (*get_eeprom_antenna_cfg)(struct ath_hw *hw,
 				      struct ath9k_channel *chan);
-	bool (*set_board_values)(struct ath_hw *hw, struct ath9k_channel *chan);
+	void (*set_board_values)(struct ath_hw *hw, struct ath9k_channel *chan);
 	void (*set_addac)(struct ath_hw *hw, struct ath9k_channel *chan);
 	int (*set_txpower)(struct ath_hw *hw, struct ath9k_channel *chan,
 			   u16 cfgCtl, u8 twiceAntennaReduction,
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
index d494e98ba971..b15eaf8417ff 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -588,6 +588,10 @@ static int ath9k_hw_post_attach(struct ath_hw *ah)
 	ecode = ath9k_hw_eeprom_attach(ah);
 	if (ecode != 0)
 		return ecode;
+
+	DPRINTF(ah->ah_sc, ATH_DBG_CONFIG, "Eeprom VER: %d, REV: %d\n",
+		ah->eep_ops->get_eeprom_ver(ah), ah->eep_ops->get_eeprom_rev(ah));
+
 	ecode = ath9k_hw_rfattach(ah);
 	if (ecode != 0)
 		return ecode;
@@ -1444,6 +1448,7 @@ static void ath9k_hw_set_operating_mode(struct ath_hw *ah, int opmode)
 		REG_CLR_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
 		break;
 	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_MESH_POINT:
 		REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_ADHOC
 			  | AR_STA_ID1_KSRCH_MODE);
 		REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
@@ -2273,11 +2278,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	else
 		ath9k_hw_spur_mitigate(ah, chan);
 
-	if (!ah->eep_ops->set_board_values(ah, chan)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"error setting board options\n");
-		return -EIO;
-	}
+	ah->eep_ops->set_board_values(ah, chan);
 
 	ath9k_hw_decrease_chain_power(ah, chan);
 
@@ -3149,6 +3150,7 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period)
 		flags |= AR_TBTT_TIMER_EN;
 		break;
 	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_MESH_POINT:
 		REG_SET_BIT(ah, AR_TXCFG,
 			    AR_TXCFG_ADHOC_BEACON_ATIM_TX_POLICY);
 		REG_WRITE(ah, AR_NEXT_NDP_TIMER,
diff --git a/drivers/net/wireless/ath9k/hw.h b/drivers/net/wireless/ath9k/hw.h
index dc681f011fdf..0b594e0ee260 100644
--- a/drivers/net/wireless/ath9k/hw.h
+++ b/drivers/net/wireless/ath9k/hw.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/initvals.h b/drivers/net/wireless/ath9k/initvals.h
index 1d60c3706f1c..e2f0a34b79a1 100644
--- a/drivers/net/wireless/ath9k/initvals.h
+++ b/drivers/net/wireless/ath9k/initvals.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/mac.c b/drivers/net/wireless/ath9k/mac.c
index f757bc7eec68..e0a6dee45839 100644
--- a/drivers/net/wireless/ath9k/mac.c
+++ b/drivers/net/wireless/ath9k/mac.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/mac.h b/drivers/net/wireless/ath9k/mac.h
index a75f65dae1d7..1176bce8b76c 100644
--- a/drivers/net/wireless/ath9k/mac.h
+++ b/drivers/net/wireless/ath9k/mac.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 8db75f6de53e..13d4e6756c99 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -940,18 +940,25 @@ static void ath_led_blink_work(struct work_struct *work)
 
 	if (!(sc->sc_flags & SC_OP_LED_ASSOCIATED))
 		return;
-	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
-			  (sc->sc_flags & SC_OP_LED_ON) ? 1 : 0);
+
+	if ((sc->led_on_duration == ATH_LED_ON_DURATION_IDLE) ||
+	    (sc->led_off_duration == ATH_LED_OFF_DURATION_IDLE))
+		ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0);
+	else
+		ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
+				  (sc->sc_flags & SC_OP_LED_ON) ? 1 : 0);
 
 	queue_delayed_work(sc->hw->workqueue, &sc->ath_led_blink_work,
 			   (sc->sc_flags & SC_OP_LED_ON) ?
 			   msecs_to_jiffies(sc->led_off_duration) :
 			   msecs_to_jiffies(sc->led_on_duration));
 
-	sc->led_on_duration =
-			max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25);
-	sc->led_off_duration =
-			max((ATH_LED_OFF_DURATION_IDLE - sc->led_off_cnt), 10);
+	sc->led_on_duration = sc->led_on_cnt ?
+			max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25) :
+			ATH_LED_ON_DURATION_IDLE;
+	sc->led_off_duration = sc->led_off_cnt ?
+			max((ATH_LED_OFF_DURATION_IDLE - sc->led_off_cnt), 10) :
+			ATH_LED_OFF_DURATION_IDLE;
 	sc->led_on_cnt = sc->led_off_cnt = 0;
 	if (sc->sc_flags & SC_OP_LED_ON)
 		sc->sc_flags &= ~SC_OP_LED_ON;
@@ -1592,7 +1599,8 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_AP) |
 		BIT(NL80211_IFTYPE_STATION) |
-		BIT(NL80211_IFTYPE_ADHOC);
+		BIT(NL80211_IFTYPE_ADHOC) |
+		BIT(NL80211_IFTYPE_MESH_POINT);
 
 	hw->wiphy->reg_notifier = ath9k_reg_notifier;
 	hw->wiphy->strict_regulatory = true;
@@ -2200,18 +2208,13 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 		ic_opmode = NL80211_IFTYPE_STATION;
 		break;
 	case NL80211_IFTYPE_ADHOC:
-		if (sc->nbcnvifs >= ATH_BCBUF) {
-			ret = -ENOBUFS;
-			goto out;
-		}
-		ic_opmode = NL80211_IFTYPE_ADHOC;
-		break;
 	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_MESH_POINT:
 		if (sc->nbcnvifs >= ATH_BCBUF) {
 			ret = -ENOBUFS;
 			goto out;
 		}
-		ic_opmode = NL80211_IFTYPE_AP;
+		ic_opmode = conf->type;
 		break;
 	default:
 		DPRINTF(sc, ATH_DBG_FATAL,
@@ -2247,7 +2250,8 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 	 * Note we only do this (at the moment) for station mode.
 	 */
 	if ((conf->type == NL80211_IFTYPE_STATION) ||
-	    (conf->type == NL80211_IFTYPE_ADHOC)) {
+	    (conf->type == NL80211_IFTYPE_ADHOC) ||
+	    (conf->type == NL80211_IFTYPE_MESH_POINT)) {
 		if (ath9k_hw_phycounters(sc->sc_ah))
 			sc->imask |= ATH9K_INT_MIB;
 		sc->imask |= ATH9K_INT_TSFOOR;
@@ -2294,8 +2298,9 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	del_timer_sync(&sc->ani.timer);
 
 	/* Reclaim beacon resources */
-	if (sc->sc_ah->opmode == NL80211_IFTYPE_AP ||
-	    sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) {
+	if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
+	    (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
+	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
 		ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
 		ath_beacon_return(sc, avp);
 	}
@@ -2428,6 +2433,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw,
 		switch (vif->type) {
 		case NL80211_IFTYPE_STATION:
 		case NL80211_IFTYPE_ADHOC:
+		case NL80211_IFTYPE_MESH_POINT:
 			/* Set BSSID */
 			memcpy(sc->curbssid, conf->bssid, ETH_ALEN);
 			memcpy(avp->bssid, conf->bssid, ETH_ALEN);
@@ -2451,7 +2457,8 @@ static int ath9k_config_interface(struct ieee80211_hw *hw,
 	}
 
 	if ((vif->type == NL80211_IFTYPE_ADHOC) ||
-	    (vif->type == NL80211_IFTYPE_AP)) {
+	    (vif->type == NL80211_IFTYPE_AP) ||
+	    (vif->type == NL80211_IFTYPE_MESH_POINT)) {
 		if ((conf->changed & IEEE80211_IFCC_BEACON) ||
 		    (conf->changed & IEEE80211_IFCC_BEACON_ENABLED &&
 		     conf->enable_beacon)) {
@@ -2723,7 +2730,7 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 
 		ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
 		break;
-	case IEEE80211_AMPDU_TX_RESUME:
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
 		ath_tx_aggr_resume(sc, sta, tid);
 		break;
 	default:
diff --git a/drivers/net/wireless/ath9k/pci.c b/drivers/net/wireless/ath9k/pci.c
index 9a58baabb9ca..6dbc58580abb 100644
--- a/drivers/net/wireless/ath9k/pci.c
+++ b/drivers/net/wireless/ath9k/pci.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -87,7 +87,6 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct ath_softc *sc;
 	struct ieee80211_hw *hw;
 	u8 csz;
-	u32 val;
 	int ret = 0;
 	struct ath_hw *ah;
 
@@ -134,14 +133,6 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	pci_set_master(pdev);
 
-	/*
-	 * Disable the RETRY_TIMEOUT register (0x41) to keep
-	 * PCI Tx retries from interfering with C3 CPU state.
-	 */
-	pci_read_config_dword(pdev, 0x40, &val);
-	if ((val & 0x0000ff00) != 0)
-		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
-
 	ret = pci_request_region(pdev, 0, "ath9k");
 	if (ret) {
 		dev_err(&pdev->dev, "PCI memory region reserve error\n");
@@ -253,21 +244,12 @@ static int ath_pci_resume(struct pci_dev *pdev)
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
-	u32 val;
 	int err;
 
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
 	pci_restore_state(pdev);
-	/*
-	 * Suspend/Resume resets the PCI configuration space, so we have to
-	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
-	 * PCI Tx retries from interfering with C3 CPU state
-	 */
-	pci_read_config_dword(pdev, 0x40, &val);
-	if ((val & 0x0000ff00) != 0)
-		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
 
 	/* Enable LED */
 	ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
diff --git a/drivers/net/wireless/ath9k/phy.c b/drivers/net/wireless/ath9k/phy.c
index e1494bae0f9f..8bcba906929a 100644
--- a/drivers/net/wireless/ath9k/phy.c
+++ b/drivers/net/wireless/ath9k/phy.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/phy.h b/drivers/net/wireless/ath9k/phy.h
index 1eac8c707342..0f7f8e0c9c95 100644
--- a/drivers/net/wireless/ath9k/phy.h
+++ b/drivers/net/wireless/ath9k/phy.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
index 832735677a46..824ccbb8b7b8 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2004 Video54 Technologies, Inc.
- * Copyright (c) 2004-2008 Atheros Communications, Inc.
+ * Copyright (c) 2004-2009 Atheros Communications, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -864,6 +864,8 @@ static void ath_rc_ratefind(struct ath_softc *sc,
 					  rate_table, nrix, 1, 0);
 		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
 				       try_per_rate, nrix, 0);
+
+		tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
 	} else {
 		try_per_rate = (ATH_11N_TXMAXTRY/4);
 		/* Set the choosen rate. No RTS for first series entry. */
@@ -1468,16 +1470,18 @@ static void ath_rc_init(struct ath_softc *sc,
 		ath_rc_priv->ht_cap);
 }
 
-static u8 ath_rc_build_ht_caps(struct ath_softc *sc, bool is_ht, bool is_cw40,
-			       bool is_sgi40)
+static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta,
+			       bool is_cw40, bool is_sgi40)
 {
 	u8 caps = 0;
 
-	if (is_ht) {
+	if (sta->ht_cap.ht_supported) {
 		caps = WLAN_RC_HT_FLAG;
 		if (sc->sc_ah->caps.tx_chainmask != 1 &&
-		    ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_DS, 0, NULL))
-			caps |= WLAN_RC_DS_FLAG;
+		    ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_DS, 0, NULL)) {
+			if (sta->ht_cap.mcs.rx_mask[1])
+				caps |= WLAN_RC_DS_FLAG;
+		}
 		if (is_cw40)
 			caps |= WLAN_RC_40_FLAG;
 		if (is_sgi40)
@@ -1615,6 +1619,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
 	/* Choose rate table first */
 
 	if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) ||
+	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT) ||
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)) {
 		rate_table = ath_choose_rate_table(sc, sband->band,
 						   sta->ht_cap.ht_supported,
@@ -1624,8 +1629,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
 		rate_table = sc->cur_rate_table;
 	}
 
-	ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta->ht_cap.ht_supported,
-						   is_cw40, is_sgi40);
+	ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta, is_cw40, is_sgi40);
 	ath_rc_init(sc, priv_sta, sband, sta, rate_table);
 }
 
@@ -1659,8 +1663,7 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 			rate_table = ath_choose_rate_table(sc, sband->band,
 						   sta->ht_cap.ht_supported,
 						   oper_cw40);
-			ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc,
-						   sta->ht_cap.ht_supported,
+			ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta,
 						   oper_cw40, oper_sgi40);
 			ath_rc_init(sc, priv_sta, sband, sta, rate_table);
 
diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h
index db9b0b9a3431..199a3ce57d64 100644
--- a/drivers/net/wireless/ath9k/rc.h
+++ b/drivers/net/wireless/ath9k/rc.h
@@ -1,7 +1,7 @@
 /*
  * Copyright (c) 2004 Sam Leffler, Errno Consulting
  * Copyright (c) 2004 Video54 Technologies, Inc.
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c
index 0bba17662a1f..71cb18d6757d 100644
--- a/drivers/net/wireless/ath9k/recv.c
+++ b/drivers/net/wireless/ath9k/recv.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -344,8 +344,13 @@ void ath_rx_cleanup(struct ath_softc *sc)
 
 	list_for_each_entry(bf, &sc->rx.rxbuf, list) {
 		skb = bf->bf_mpdu;
-		if (skb)
+		if (skb) {
+			dma_unmap_single(sc->dev,
+					 bf->bf_buf_addr,
+					 sc->rx.bufsize,
+					 DMA_FROM_DEVICE);
 			dev_kfree_skb(skb);
+		}
 	}
 
 	if (sc->rx.rxdma.dd_desc_len != 0)
diff --git a/drivers/net/wireless/ath9k/reg.h b/drivers/net/wireless/ath9k/reg.h
index d86e90e38173..52605246679f 100644
--- a/drivers/net/wireless/ath9k/reg.h
+++ b/drivers/net/wireless/ath9k/reg.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/regd.c b/drivers/net/wireless/ath9k/regd.c
index b8f9b6d6bec4..4ca625102291 100644
--- a/drivers/net/wireless/ath9k/regd.c
+++ b/drivers/net/wireless/ath9k/regd.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/regd.h b/drivers/net/wireless/ath9k/regd.h
index 8f885f3bc8df..9f5fbd4eea7a 100644
--- a/drivers/net/wireless/ath9k/regd.h
+++ b/drivers/net/wireless/ath9k/regd.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath9k/regd_common.h
index b41d0002f3fe..4d0e298cd1c7 100644
--- a/drivers/net/wireless/ath9k/regd_common.h
+++ b/drivers/net/wireless/ath9k/regd_common.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index e3f376611f85..689bdbf78808 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -64,6 +64,10 @@ static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
 static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
 			     struct list_head *head);
 static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf);
+static int ath_tx_num_badfrms(struct ath_softc *sc, struct ath_buf *bf,
+			      int txok);
+static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds,
+			     int nbad, int txok, bool update_rc);
 
 /*********************/
 /* Aggregation logic */
@@ -274,9 +278,10 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 	struct ath_buf *bf_next, *bf_last = bf->bf_lastbf;
 	struct ath_desc *ds = bf_last->bf_desc;
 	struct list_head bf_head, bf_pending;
-	u16 seq_st = 0;
+	u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0;
 	u32 ba[WME_BA_BMP_SIZE >> 5];
-	int isaggr, txfail, txpending, sendbar = 0, needreset = 0;
+	int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0;
+	bool rc_update = true;
 
 	skb = (struct sk_buff *)bf->bf_mpdu;
 	hdr = (struct ieee80211_hdr *)skb->data;
@@ -316,6 +321,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 	INIT_LIST_HEAD(&bf_pending);
 	INIT_LIST_HEAD(&bf_head);
 
+	nbad = ath_tx_num_badfrms(sc, bf, txok);
 	while (bf) {
 		txfail = txpending = 0;
 		bf_next = bf->bf_next;
@@ -323,8 +329,10 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 		if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, bf->bf_seqno))) {
 			/* transmit completion, subframe is
 			 * acked by block ack */
+			acked_cnt++;
 		} else if (!isaggr && txok) {
 			/* transmit completion */
+			acked_cnt++;
 		} else {
 			if (!(tid->state & AGGR_CLEANUP) &&
 			    ds->ds_txstat.ts_flags != ATH9K_TX_SW_ABORTED) {
@@ -335,6 +343,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 					bf->bf_state.bf_type |= BUF_XRETRY;
 					txfail = 1;
 					sendbar = 1;
+					txfail_cnt++;
 				}
 			} else {
 				/*
@@ -361,6 +370,13 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 			ath_tx_update_baw(sc, tid, bf->bf_seqno);
 			spin_unlock_bh(&txq->axq_lock);
 
+			if (rc_update && (acked_cnt == 1 || txfail_cnt == 1)) {
+				ath_tx_rc_status(bf, ds, nbad, txok, true);
+				rc_update = false;
+			} else {
+				ath_tx_rc_status(bf, ds, nbad, txok, false);
+			}
+
 			ath_tx_complete_buf(sc, bf, &bf_head, !txfail, sendbar);
 		} else {
 			/* retry the un-acked ones */
@@ -1734,7 +1750,7 @@ exit:
 /*****************/
 
 static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
-			    struct ath_xmit_status *tx_status)
+			    int tx_flags)
 {
 	struct ieee80211_hw *hw = sc->hw;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
@@ -1755,18 +1771,14 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 		tx_info->rate_driver_data[0] = NULL;
 	}
 
-	if (tx_status->flags & ATH_TX_BAR) {
+	if (tx_flags & ATH_TX_BAR)
 		tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
-		tx_status->flags &= ~ATH_TX_BAR;
-	}
 
-	if (!(tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) {
+	if (!(tx_flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) {
 		/* Frame was ACKed */
 		tx_info->flags |= IEEE80211_TX_STAT_ACK;
 	}
 
-	tx_info->status.rates[0].count = tx_status->retries + 1;
-
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
 	padsize = hdrlen & 3;
 	if (padsize && hdrlen >= 24) {
@@ -1789,29 +1801,22 @@ static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
 				int txok, int sendbar)
 {
 	struct sk_buff *skb = bf->bf_mpdu;
-	struct ath_xmit_status tx_status;
 	unsigned long flags;
+	int tx_flags = 0;
 
-	/*
-	 * Set retry information.
-	 * NB: Don't use the information in the descriptor, because the frame
-	 * could be software retried.
-	 */
-	tx_status.retries = bf->bf_retries;
-	tx_status.flags = 0;
 
 	if (sendbar)
-		tx_status.flags = ATH_TX_BAR;
+		tx_flags = ATH_TX_BAR;
 
 	if (!txok) {
-		tx_status.flags |= ATH_TX_ERROR;
+		tx_flags |= ATH_TX_ERROR;
 
 		if (bf_isxretried(bf))
-			tx_status.flags |= ATH_TX_XRETRY;
+			tx_flags |= ATH_TX_XRETRY;
 	}
 
 	dma_unmap_single(sc->dev, bf->bf_dmacontext, skb->len, DMA_TO_DEVICE);
-	ath_tx_complete(sc, skb, &tx_status);
+	ath_tx_complete(sc, skb, tx_flags);
 
 	/*
 	 * Return the list of ath_buf of this mpdu to free queue
@@ -1852,27 +1857,40 @@ static int ath_tx_num_badfrms(struct ath_softc *sc, struct ath_buf *bf,
 	return nbad;
 }
 
-static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds, int nbad)
+static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds,
+			     int nbad, int txok, bool update_rc)
 {
 	struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
+	struct ieee80211_hw *hw = tx_info_priv->aphy->hw;
+	u8 i, tx_rateindex;
+
+	if (txok)
+		tx_info->status.ack_signal = ds->ds_txstat.ts_rssi;
 
-	tx_info_priv->update_rc = false;
+	tx_rateindex = ds->ds_txstat.ts_rateindex;
+	WARN_ON(tx_rateindex >= hw->max_rates);
+
+	tx_info_priv->update_rc = update_rc;
 	if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT)
 		tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
 
 	if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 &&
-	    (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) {
+	    (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0 && update_rc) {
 		if (ieee80211_is_data(hdr->frame_control)) {
 			memcpy(&tx_info_priv->tx, &ds->ds_txstat,
 			       sizeof(tx_info_priv->tx));
 			tx_info_priv->n_frames = bf->bf_nframes;
 			tx_info_priv->n_bad_frames = nbad;
-			tx_info_priv->update_rc = true;
 		}
 	}
+
+	for (i = tx_rateindex + 1; i < hw->max_rates; i++)
+		tx_info->status.rates[i].count = 0;
+
+	tx_info->status.rates[tx_rateindex].count = bf->bf_retries + 1;
 }
 
 static void ath_wake_mac80211_queue(struct ath_softc *sc, struct ath_txq *txq)
@@ -1897,7 +1915,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 	struct ath_buf *bf, *lastbf, *bf_held = NULL;
 	struct list_head bf_head;
 	struct ath_desc *ds;
-	int txok, nbad = 0;
+	int txok;
 	int status;
 
 	DPRINTF(sc, ATH_DBG_QUEUE, "tx queue %d (%x), link %p\n",
@@ -1991,13 +2009,9 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 			bf->bf_retries = ds->ds_txstat.ts_longretry;
 			if (ds->ds_txstat.ts_status & ATH9K_TXERR_XRETRY)
 				bf->bf_state.bf_type |= BUF_XRETRY;
-			nbad = 0;
-		} else {
-			nbad = ath_tx_num_badfrms(sc, bf, txok);
+			ath_tx_rc_status(bf, ds, 0, txok, true);
 		}
 
-		ath_tx_rc_status(bf, ds, nbad);
-
 		if (bf_isampdu(bf))
 			ath_tx_complete_aggr(sc, txq, bf, &bf_head, txok);
 		else
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index b72ef3fd315a..4896e0831114 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3993,6 +3993,8 @@ static void setup_struct_wldev_for_init(struct b43_wldev *dev)
 	dev->irq_reason = 0;
 	memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
 	dev->irq_savedstate = B43_IRQ_MASKTEMPLATE;
+	if (b43_modparam_verbose < B43_VERBOSITY_DEBUG)
+		dev->irq_savedstate &= ~B43_IRQ_PHY_TXERR;
 
 	dev->mac_suspended = 1;
 
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 0f53c7e5e01e..a63d88841df8 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -50,7 +50,7 @@ static int b43_plcp_get_bitrate_idx_cck(struct b43_plcp_hdr6 *plcp)
 }
 
 /* Extract the bitrate index out of an OFDM PLCP header. */
-static u8 b43_plcp_get_bitrate_idx_ofdm(struct b43_plcp_hdr6 *plcp, bool aphy)
+static int b43_plcp_get_bitrate_idx_ofdm(struct b43_plcp_hdr6 *plcp, bool aphy)
 {
 	int base = aphy ? 0 : 4;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
index 205603d082aa..73f93a0ff2df 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
@@ -233,7 +233,7 @@ struct iwl3945_eeprom {
 #define PCI_CFG_REV_ID_BIT_RTP                      (0x80)	/* bit 7    */
 
 #define TFD_QUEUE_MIN           0
-#define TFD_QUEUE_MAX           6
+#define TFD_QUEUE_MAX           5	/* 4 DATA + 1 CMD */
 
 #define IWL_NUM_SCAN_RATES         (2)
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index f65c308a6714..af6b9d444778 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -124,7 +124,7 @@ static struct iwl3945_tpt_entry iwl3945_tpt_table_g[] = {
 #define IWL39_RATE_HIGH_TH          11520
 #define IWL_SUCCESS_UP_TH	   8960
 #define IWL_SUCCESS_DOWN_TH	  10880
-#define IWL_RATE_MIN_FAILURE_TH       8
+#define IWL_RATE_MIN_FAILURE_TH       6
 #define IWL_RATE_MIN_SUCCESS_TH       8
 #define IWL_RATE_DECREASE_TH       1920
 #define IWL_RATE_RETRY_TH	     15
@@ -488,7 +488,7 @@ static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband
 
 	IWL_DEBUG_RATE(priv, "enter\n");
 
-	retries = info->status.rates[0].count - 1;
+	retries = info->status.rates[0].count;
 	/* Sanity Check for retries */
 	if (retries > IWL_RATE_RETRY_TH)
 		retries = IWL_RATE_RETRY_TH;
@@ -791,16 +791,15 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 	if ((window->success_ratio < IWL_RATE_DECREASE_TH) || !current_tpt) {
 		IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n");
 		scale_action = -1;
-
 	/* No throughput measured yet for adjacent rates,
 	 * try increase */
 	} else if ((low_tpt == IWL_INVALID_VALUE) &&
 		   (high_tpt == IWL_INVALID_VALUE)) {
 
-		if (high != IWL_RATE_INVALID && window->success_counter >= IWL_RATE_INCREASE_TH)
+		if (high != IWL_RATE_INVALID && window->success_ratio >= IWL_RATE_INCREASE_TH)
 			scale_action = 1;
 		else if (low != IWL_RATE_INVALID)
-			scale_action = -1;
+			scale_action = 0;
 
 	/* Both adjacent throughputs are measured, but neither one has
 	 * better throughput; we're using the best rate, don't change
@@ -826,14 +825,14 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 			else {
 				IWL_DEBUG_RATE(priv,
 				    "decrease rate because of high tpt\n");
-				scale_action = -1;
+				scale_action = 0;
 			}
 		} else if (low_tpt != IWL_INVALID_VALUE) {
 			if (low_tpt > current_tpt) {
 				IWL_DEBUG_RATE(priv,
 				    "decrease rate because of low tpt\n");
 				scale_action = -1;
-			} else if (window->success_counter >= IWL_RATE_INCREASE_TH) {
+			} else if (window->success_ratio >= IWL_RATE_INCREASE_TH) {
 				/* Lower rate has better
 				 * throughput,decrease rate */
 				scale_action = 1;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index ba7e720e73c1..2399328e8de7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -293,7 +293,7 @@ static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv,
 	if (iwl_queue_space(q) > q->low_mark && (txq_id >= 0) &&
 			(txq_id != IWL_CMD_QUEUE_NUM) &&
 			priv->mac80211_registered)
-		ieee80211_wake_queue(priv->hw, txq_id);
+		iwl_wake_queue(priv, txq_id);
 }
 
 /**
@@ -747,11 +747,6 @@ void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 	int i;
 	int counter;
 
-	/* classify bd */
-	if (txq->q.id == IWL_CMD_QUEUE_NUM)
-		/* nothing to cleanup after for host commands */
-		return;
-
 	/* sanity check */
 	counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
 	if (counter > NUM_TFD_CHUNKS) {
@@ -1046,7 +1041,7 @@ static int iwl3945_txq_ctx_reset(struct iwl_priv *priv)
 		goto error;
 
 	/* Tx queue(s) */
-	for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) {
+	for (txq_id = 0; txq_id <= priv->hw_params.max_txq_num; txq_id++) {
 		slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ?
 				TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
 		rc = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
@@ -1184,7 +1179,7 @@ int iwl3945_hw_nic_init(struct iwl_priv *priv)
 	IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
 
 	rc = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
-	if(rc)
+	if (rc)
 		return rc;
 
 	priv->cfg->ops->lib->apm_ops.config(priv);
@@ -1239,8 +1234,12 @@ void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv)
 	int txq_id;
 
 	/* Tx queues */
-	for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++)
-		iwl_tx_queue_free(priv, txq_id);
+	for (txq_id = 0; txq_id <= priv->hw_params.max_txq_num; txq_id++)
+		if (txq_id == IWL_CMD_QUEUE_NUM)
+			iwl_cmd_queue_free(priv);
+		else
+			iwl_tx_queue_free(priv, txq_id);
+
 }
 
 void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
@@ -1259,7 +1258,7 @@ void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
 	iwl_write_prph(priv, ALM_SCD_MODE_REG, 0);
 
 	/* reset TFD queues */
-	for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) {
+	for (txq_id = 0; txq_id <= priv->hw_params.max_txq_num; txq_id++) {
 		iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0);
 		iwl_poll_direct_bit(priv, FH39_TSSR_TX_STATUS,
 				FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
@@ -2488,6 +2487,9 @@ int iwl3945_hw_set_hw_params(struct iwl_priv *priv)
 		return -ENOMEM;
 	}
 
+	/* Assign number of Usable TX queues */
+	priv->hw_params.max_txq_num = TFD_QUEUE_MAX;
+
 	priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd);
 	priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_3K;
 	priv->hw_params.max_pkt_size = 2342;
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index bd0140be774e..847a6220c5e6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2178,10 +2178,9 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 			    (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
 			    (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) {
 				if (agg->state == IWL_AGG_OFF)
-					ieee80211_wake_queue(priv->hw, txq_id);
+					iwl_wake_queue(priv, txq_id);
 				else
-					ieee80211_wake_queue(priv->hw,
-							     txq->swq_id);
+					iwl_wake_queue(priv, txq->swq_id);
 			}
 		}
 	} else {
@@ -2205,7 +2204,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 
 		if (priv->mac80211_registered &&
 		    (iwl_queue_space(&txq->q) > txq->q.low_mark))
-			ieee80211_wake_queue(priv->hw, txq_id);
+			iwl_wake_queue(priv, txq_id);
 	}
 
 	if (qc && likely(sta_id != IWL_INVALID_STATION))
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 08c19bea71e3..e5ca2511a81a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1077,7 +1077,7 @@ static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 
 	if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
 	    (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) {
-		IWL_WARN(priv,
+		IWL_ERR(priv,
 			"queue number out of range: %d, must be %d to %d\n",
 			txq_id, IWL50_FIRST_AMPDU_QUEUE,
 			IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1);
@@ -1295,10 +1295,9 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
 			    (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
 			    (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) {
 				if (agg->state == IWL_AGG_OFF)
-					ieee80211_wake_queue(priv->hw, txq_id);
+					iwl_wake_queue(priv, txq_id);
 				else
-					ieee80211_wake_queue(priv->hw,
-							     txq->swq_id);
+					iwl_wake_queue(priv, txq->swq_id);
 			}
 		}
 	} else {
@@ -1324,7 +1323,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
 
 		if (priv->mac80211_registered &&
 		    (iwl_queue_space(&txq->q) > txq->q.low_mark))
-			ieee80211_wake_queue(priv->hw, txq_id);
+			iwl_wake_queue(priv, txq_id);
 	}
 
 	if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 0db3bc011ac2..663dc83be501 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1567,9 +1567,8 @@ static void iwl_alive_start(struct iwl_priv *priv)
 	if (iwl_is_associated(priv)) {
 		struct iwl_rxon_cmd *active_rxon =
 				(struct iwl_rxon_cmd *)&priv->active_rxon;
-
-		memcpy(&priv->staging_rxon, &priv->active_rxon,
-		       sizeof(priv->staging_rxon));
+		/* apply any changes in staging */
+		priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
 		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 	} else {
 		/* Initialize our rx_config data */
@@ -2184,110 +2183,112 @@ static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
 	struct iwl_priv *priv = hw->priv;
 	const struct iwl_channel_info *ch_info;
 	struct ieee80211_conf *conf = &hw->conf;
-	unsigned long flags;
+	unsigned long flags = 0;
 	int ret = 0;
-	u16 channel;
+	u16 ch;
+	int scan_active = 0;
 
 	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter to channel %d\n", conf->channel->hw_value);
+	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
+					conf->channel->hw_value, changed);
 
-	priv->current_ht_config.is_ht = conf_is_ht(conf);
-
-	if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - waiting for uCode\n");
-		goto out;
+	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
+			test_bit(STATUS_SCANNING, &priv->status))) {
+		scan_active = 1;
+		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
 	}
 
-	if (!conf->radio_enabled)
-		iwl_radio_kill_sw_disable_radio(priv);
 
-	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		ret = -EIO;
-		goto out;
-	}
+	/* during scanning mac80211 will delay channel setting until
+	 * scan finish with changed = 0
+	 */
+	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
+		if (scan_active)
+			goto set_ch_out;
+
+		ch = ieee80211_frequency_to_channel(conf->channel->center_freq);
+		ch_info = iwl_get_channel_info(priv, conf->channel->band, ch);
+		if (!is_channel_valid(ch_info)) {
+			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
 
-	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
-		     test_bit(STATUS_SCANNING, &priv->status))) {
-		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
-		mutex_unlock(&priv->mutex);
-		return 0;
-	}
+		if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+			!is_channel_ibss(ch_info)) {
+			IWL_ERR(priv, "channel %d in band %d not "
+				"IBSS channel\n",
+				conf->channel->hw_value, conf->channel->band);
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
 
-	channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
-	ch_info = iwl_get_channel_info(priv, conf->channel->band, channel);
-	if (!is_channel_valid(ch_info)) {
-		IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
-		ret = -EINVAL;
-		goto out;
-	}
+		priv->current_ht_config.is_ht = conf_is_ht(conf);
 
-	if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
-	    !is_channel_ibss(ch_info)) {
-		IWL_ERR(priv, "channel %d in band %d not IBSS channel\n",
-			conf->channel->hw_value, conf->channel->band);
-		ret = -EINVAL;
-		goto out;
-	}
+		spin_lock_irqsave(&priv->lock, flags);
 
-	spin_lock_irqsave(&priv->lock, flags);
 
+		/* if we are switching from ht to 2.4 clear flags
+		 * from any ht related info since 2.4 does not
+		 * support ht */
+		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
+			priv->staging_rxon.flags = 0;
 
-	/* if we are switching from ht to 2.4 clear flags
-	 * from any ht related info since 2.4 does not
-	 * support ht */
-	if ((le16_to_cpu(priv->staging_rxon.channel) != channel)
-#ifdef IEEE80211_CONF_CHANNEL_SWITCH
-	    && !(conf->flags & IEEE80211_CONF_CHANNEL_SWITCH)
-#endif
-	)
-		priv->staging_rxon.flags = 0;
+		iwl_set_rxon_channel(priv, conf->channel);
 
-	iwl_set_rxon_channel(priv, conf->channel);
+		iwl_set_flags_for_band(priv, conf->channel->band);
+		spin_unlock_irqrestore(&priv->lock, flags);
+ set_ch_out:
+		/* The list of supported rates and rate mask can be different
+		 * for each band; since the band may have changed, reset
+		 * the rate mask to what mac80211 lists */
+		iwl_set_rate(priv);
+	}
 
-	iwl_set_flags_for_band(priv, conf->channel->band);
+	if (changed & IEEE80211_CONF_CHANGE_PS) {
+		if (conf->flags & IEEE80211_CONF_PS)
+			ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
+		else
+			ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
+		if (ret)
+			IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
 
-	/* The list of supported rates and rate mask can be different
-	 * for each band; since the band may have changed, reset
-	 * the rate mask to what mac80211 lists */
-	iwl_set_rate(priv);
+	}
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
+			priv->tx_power_user_lmt, conf->power_level);
 
-#ifdef IEEE80211_CONF_CHANNEL_SWITCH
-	if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) {
-		iwl_hw_channel_switch(priv, conf->channel);
-		goto out;
+		iwl_set_tx_power(priv, conf->power_level, false);
+	}
+
+	/* call to ensure that 4965 rx_chain is set properly in monitor mode */
+	iwl_set_rxon_chain(priv);
+
+	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
+		if (conf->radio_enabled &&
+			iwl_radio_kill_sw_enable_radio(priv)) {
+			IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
+						"waiting for uCode\n");
+			goto out;
+		}
+
+		if (!conf->radio_enabled)
+			iwl_radio_kill_sw_disable_radio(priv);
 	}
-#endif
 
 	if (!conf->radio_enabled) {
 		IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
 		goto out;
 	}
 
-	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF kill\n");
-		ret = -EIO;
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
 		goto out;
 	}
 
-	if (conf->flags & IEEE80211_CONF_PS)
-		ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
-	else
-		ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
-	if (ret)
-		IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
-
-	IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
-			   priv->tx_power_user_lmt, conf->power_level);
-
-	iwl_set_tx_power(priv, conf->power_level, false);
-
-	iwl_set_rate(priv);
-
-	/* call to ensure that 4965 rx_chain is set properly in monitor mode */
-	iwl_set_rxon_chain(priv);
+	if (scan_active)
+		goto out;
 
 	if (memcmp(&priv->active_rxon,
 		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
@@ -2295,9 +2296,9 @@ static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
 	else
 		IWL_DEBUG_INFO(priv, "No re-sending same RXON configuration.\n");
 
-	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 out:
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 	mutex_unlock(&priv->mutex);
 	return ret;
 }
@@ -2682,6 +2683,7 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
 			     struct ieee80211_sta *sta, u16 tid, u16 *ssn)
 {
 	struct iwl_priv *priv = hw->priv;
+	int ret;
 
 	IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
 		     sta->addr, tid);
@@ -2695,13 +2697,21 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
 		return iwl_sta_rx_agg_start(priv, sta->addr, tid, *ssn);
 	case IEEE80211_AMPDU_RX_STOP:
 		IWL_DEBUG_HT(priv, "stop Rx\n");
-		return iwl_sta_rx_agg_stop(priv, sta->addr, tid);
+		ret = iwl_sta_rx_agg_stop(priv, sta->addr, tid);
+		if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+			return 0;
+		else
+			return ret;
 	case IEEE80211_AMPDU_TX_START:
 		IWL_DEBUG_HT(priv, "start Tx\n");
 		return iwl_tx_agg_start(priv, sta->addr, tid, ssn);
 	case IEEE80211_AMPDU_TX_STOP:
 		IWL_DEBUG_HT(priv, "stop Tx\n");
-		return iwl_tx_agg_stop(priv, sta->addr, tid);
+		ret = iwl_tx_agg_stop(priv, sta->addr, tid);
+		if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+			return 0;
+		else
+			return ret;
 	default:
 		IWL_DEBUG_HT(priv, "unknown\n");
 		return -EINVAL;
@@ -3083,11 +3093,6 @@ static ssize_t store_power_level(struct device *d,
 
 	mutex_lock(&priv->mutex);
 
-	if (!iwl_is_ready(priv)) {
-		ret = -EAGAIN;
-		goto out;
-	}
-
 	ret = strict_strtoul(buf, 10, &mode);
 	if (ret)
 		goto out;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 085e9cf1cac9..c54fb93e9d72 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1298,6 +1298,7 @@ int iwl_setup_mac(struct iwl_priv *priv)
 	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM |
 		    IEEE80211_HW_AMPDU_AGGREGATION |
+		    IEEE80211_HW_SPECTRUM_MGMT |
 		    IEEE80211_HW_SUPPORTS_PS;
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_STATION) |
@@ -1308,9 +1309,6 @@ int iwl_setup_mac(struct iwl_priv *priv)
 
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
-	/* queues to support 11n aggregation */
-	if (priv->cfg->sku & IWL_SKU_N)
-		hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues;
 
 	hw->conf.beacon_int = 100;
 	hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
@@ -1437,6 +1435,10 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
 
 	priv->tx_power_user_lmt = tx_power;
 
+	/* if nic is not up don't send command */
+	if (!iwl_is_ready_rf(priv))
+		return ret;
+
 	if (force && priv->cfg->ops->lib->send_tx_power)
 		ret = priv->cfg->ops->lib->send_tx_power(priv);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 27310fec2e43..a8eac8c3c1fa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -264,6 +264,7 @@ void iwl_rx_reply_error(struct iwl_priv *priv,
 * RX
 ******************************************************/
 void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
+void iwl_cmd_queue_free(struct iwl_priv *priv);
 int iwl_rx_queue_alloc(struct iwl_priv *priv);
 void iwl_rx_handle(struct iwl_priv *priv);
 int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 36cfeccfafbc..64eb585f1578 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -425,6 +425,56 @@ static ssize_t iwl_dbgfs_channels_read(struct file *file, char __user *user_buf,
 	return ret;
 }
 
+static ssize_t iwl_dbgfs_status_read(struct file *file,
+						char __user *user_buf,
+						size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	char buf[512];
+	int pos = 0;
+	const size_t bufsz = sizeof(buf);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_HCMD_ACTIVE:\t %d\n",
+		test_bit(STATUS_HCMD_ACTIVE, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_HCMD_SYNC_ACTIVE: %d\n",
+		test_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INT_ENABLED:\t %d\n",
+		test_bit(STATUS_INT_ENABLED, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n",
+		test_bit(STATUS_RF_KILL_HW, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_SW:\t %d\n",
+		test_bit(STATUS_RF_KILL_SW, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INIT:\t\t %d\n",
+		test_bit(STATUS_INIT, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_ALIVE:\t\t %d\n",
+		test_bit(STATUS_ALIVE, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_READY:\t\t %d\n",
+		test_bit(STATUS_READY, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_TEMPERATURE:\t %d\n",
+		test_bit(STATUS_TEMPERATURE, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_GEO_CONFIGURED:\t %d\n",
+		test_bit(STATUS_GEO_CONFIGURED, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_EXIT_PENDING:\t %d\n",
+		test_bit(STATUS_EXIT_PENDING, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_IN_SUSPEND:\t %d\n",
+		test_bit(STATUS_IN_SUSPEND, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_STATISTICS:\t %d\n",
+		test_bit(STATUS_STATISTICS, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCANNING:\t %d\n",
+		test_bit(STATUS_SCANNING, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_ABORTING:\t %d\n",
+		test_bit(STATUS_SCAN_ABORTING, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_HW:\t\t %d\n",
+		test_bit(STATUS_SCAN_HW, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_POWER_PMI:\t %d\n",
+		test_bit(STATUS_POWER_PMI, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_FW_ERROR:\t %d\n",
+		test_bit(STATUS_FW_ERROR, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_MODE_PENDING:\t %d\n",
+		test_bit(STATUS_MODE_PENDING, &priv->status));
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
 DEBUGFS_READ_WRITE_FILE_OPS(sram);
 DEBUGFS_WRITE_FILE_OPS(log_event);
 DEBUGFS_READ_FILE_OPS(eeprom);
@@ -432,6 +482,7 @@ DEBUGFS_READ_FILE_OPS(stations);
 DEBUGFS_READ_FILE_OPS(rx_statistics);
 DEBUGFS_READ_FILE_OPS(tx_statistics);
 DEBUGFS_READ_FILE_OPS(channels);
+DEBUGFS_READ_FILE_OPS(status);
 
 /*
  * Create the debugfs files and directories
@@ -466,7 +517,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_FILE(rx_statistics, data);
 	DEBUGFS_ADD_FILE(tx_statistics, data);
 	DEBUGFS_ADD_FILE(channels, data);
-	DEBUGFS_ADD_X32(status, data, (u32 *)&priv->status);
+	DEBUGFS_ADD_FILE(status, data);
 	DEBUGFS_ADD_BOOL(disable_sensitivity, rf, &priv->disable_sens_cal);
 	DEBUGFS_ADD_BOOL(disable_chain_noise, rf,
 			 &priv->disable_chain_noise_cal);
@@ -496,6 +547,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_log_event);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_stations);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_channels);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_status);
 	DEBUGFS_REMOVE(priv->dbgfs->dir_data);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_sensitivity);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_chain_noise);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 0baae8022824..ec9a13846edd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -996,6 +996,12 @@ struct iwl_priv {
 	u8 key_mapping_key;
 	unsigned long ucode_key_table;
 
+	/* queue refcounts */
+#define IWL_MAX_HW_QUEUES	32
+	unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
+	/* for each AC */
+	atomic_t queue_stop_count[4];
+
 	/* Indication if ieee80211_ops->open has been called */
 	u8 is_open;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-helpers.h b/drivers/net/wireless/iwlwifi/iwl-helpers.h
index fb64d297dd4e..a1328c3c81ae 100644
--- a/drivers/net/wireless/iwlwifi/iwl-helpers.h
+++ b/drivers/net/wireless/iwlwifi/iwl-helpers.h
@@ -93,4 +93,56 @@ static inline int iwl_alloc_fw_desc(struct pci_dev *pci_dev,
 	return (desc->v_addr != NULL) ? 0 : -ENOMEM;
 }
 
+/*
+ * we have 8 bits used like this:
+ *
+ * 7 6 5 4 3 2 1 0
+ * | | | | | | | |
+ * | | | | | | +-+-------- AC queue (0-3)
+ * | | | | | |
+ * | +-+-+-+-+------------ HW A-MPDU queue
+ * |
+ * +---------------------- indicates agg queue
+ */
+static inline u8 iwl_virtual_agg_queue_num(u8 ac, u8 hwq)
+{
+	BUG_ON(ac > 3);   /* only have 2 bits */
+	BUG_ON(hwq > 31); /* only have 5 bits */
+
+	return 0x80 | (hwq << 2) | ac;
+}
+
+static inline void iwl_wake_queue(struct iwl_priv *priv, u8 queue)
+{
+	u8 ac = queue;
+	u8 hwq = queue;
+
+	if (queue & 0x80) {
+		ac = queue & 3;
+		hwq = (queue >> 2) & 0x1f;
+	}
+
+	if (test_and_clear_bit(hwq, priv->queue_stopped))
+		if (atomic_dec_return(&priv->queue_stop_count[ac]) <= 0)
+			ieee80211_wake_queue(priv->hw, ac);
+}
+
+static inline void iwl_stop_queue(struct iwl_priv *priv, u8 queue)
+{
+	u8 ac = queue;
+	u8 hwq = queue;
+
+	if (queue & 0x80) {
+		ac = queue & 3;
+		hwq = (queue >> 2) & 0x1f;
+	}
+
+	if (!test_and_set_bit(hwq, priv->queue_stopped))
+		if (atomic_inc_return(&priv->queue_stop_count[ac]) > 0)
+			ieee80211_stop_queue(priv->hw, ac);
+}
+
+#define ieee80211_stop_queue DO_NOT_USE_ieee80211_stop_queue
+#define ieee80211_wake_queue DO_NOT_USE_ieee80211_wake_queue
+
 #endif				/* __iwl_helpers_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 18b7e4195ea1..47c894530eb5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -273,7 +273,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 	if (priv->iw_mode != NL80211_IFTYPE_STATION)
 		final_mode = IWL_POWER_MODE_CAM;
 
-	if (!iwl_is_rfkill(priv) && !setting->power_disabled &&
+	if (iwl_is_ready_rf(priv) && !setting->power_disabled &&
 	    ((setting->power_mode != final_mode) || force)) {
 		struct iwl_powertable_cmd cmd;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 1684490d93c0..5798fe49c771 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -1138,8 +1138,10 @@ int iwl_sta_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid)
 	int sta_id;
 
 	sta_id = iwl_find_station(priv, addr);
-	if (sta_id == IWL_INVALID_STATION)
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid);
 		return -ENXIO;
+	}
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
 	priv->stations[sta_id].sta.station_flags_msk = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index dff60fb70214..1f117a49c569 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -174,7 +174,7 @@ EXPORT_SYMBOL(iwl_tx_queue_free);
  * Free all buffers.
  * 0-fill, but do not free "txq" descriptor structure.
  */
-static void iwl_cmd_queue_free(struct iwl_priv *priv)
+void iwl_cmd_queue_free(struct iwl_priv *priv)
 {
 	struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
 	struct iwl_queue *q = &txq->q;
@@ -193,12 +193,14 @@ static void iwl_cmd_queue_free(struct iwl_priv *priv)
 
 	/* De-alloc circular buffer of TFDs */
 	if (txq->q.n_bd)
-		pci_free_consistent(dev, sizeof(struct iwl_tfd) *
+		pci_free_consistent(dev, priv->hw_params.tfd_size *
 				    txq->q.n_bd, txq->tfds, txq->q.dma_addr);
 
 	/* 0-fill queue descriptor structure */
 	memset(txq, 0, sizeof(*txq));
 }
+EXPORT_SYMBOL(iwl_cmd_queue_free);
+
 /*************** DMA-QUEUE-GENERAL-FUNCTIONS  *****
  * DMA services
  *
@@ -761,8 +763,10 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 		hdr->seq_ctrl |= cpu_to_le16(seq_number);
 		seq_number += 0x10;
 		/* aggregation is on for this <sta,tid> */
-		if (info->flags & IEEE80211_TX_CTL_AMPDU)
+		if (info->flags & IEEE80211_TX_CTL_AMPDU) {
 			txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
+			swq_id = iwl_virtual_agg_queue_num(swq_id, txq_id);
+		}
 		priv->stations[sta_id].tid[tid].tfds_in_queue++;
 	}
 
@@ -893,7 +897,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 			iwl_txq_update_write_ptr(priv, txq);
 			spin_unlock_irqrestore(&priv->lock, flags);
 		} else {
-			ieee80211_stop_queue(priv->hw, txq->swq_id);
+			iwl_stop_queue(priv, txq->swq_id);
 		}
 	}
 
@@ -1221,8 +1225,10 @@ int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid)
 
 	sta_id = iwl_find_station(priv, ra);
 
-	if (sta_id == IWL_INVALID_STATION)
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid);
 		return -ENXIO;
+	}
 
 	if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON)
 		IWL_WARN(priv, "Stopping AGG while state not IWL_AGG_ON\n");
@@ -1429,7 +1435,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
 		if ((iwl_queue_space(&txq->q) > txq->q.low_mark) &&
 		    priv->mac80211_registered &&
 		    (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA))
-			ieee80211_wake_queue(priv->hw, txq->swq_id);
+			iwl_wake_queue(priv, txq->swq_id);
 
 		iwl_txq_check_empty(priv, sta_id, tid, scd_flow);
 	}
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4465320f2735..a71b08ca7c71 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -485,14 +485,14 @@ static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
 	memcpy(priv->stations_39[sta_id].sta.key.key, keyconf->key,
 	       keyconf->keylen);
 
-	if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
+	if ((priv->stations_39[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
 			== STA_KEY_FLG_NO_ENC)
-		priv->stations[sta_id].sta.key.key_offset =
+		priv->stations_39[sta_id].sta.key.key_offset =
 				 iwl_get_free_ucode_key_index(priv);
 	/* else, we are overriding an existing key => no need to allocated room
 	* in uCode. */
 
-	WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+	WARN(priv->stations_39[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
 		"no space for a new key");
 
 	priv->stations_39[sta_id].sta.key.key_flags = key_flags;
@@ -560,7 +560,7 @@ static int iwl3945_set_dynamic_key(struct iwl_priv *priv,
 		ret = iwl3945_set_wep_dynamic_key_info(priv, keyconf, sta_id);
 		break;
 	default:
-		IWL_ERR(priv,"Unknown alg: %s alg = %d\n", __func__, keyconf->alg);
+		IWL_ERR(priv, "Unknown alg: %s alg = %d\n", __func__, keyconf->alg);
 		ret = -EINVAL;
 	}
 
@@ -1168,7 +1168,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 			spin_unlock_irqrestore(&priv->lock, flags);
 		}
 
-		ieee80211_stop_queue(priv->hw, skb_get_queue_mapping(skb));
+		iwl_stop_queue(priv, skb_get_queue_mapping(skb));
 	}
 
 	return 0;
@@ -3773,15 +3773,19 @@ static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed)
 	}
 #endif
 
-	if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - waiting for uCode\n");
-		goto out;
-	}
+	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
+		if (conf->radio_enabled &&
+		    iwl_radio_kill_sw_enable_radio(priv)) {
+			IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
+						 "waiting for uCode\n");
+			goto out;
+		}
 
-	if (!conf->radio_enabled) {
-		iwl_radio_kill_sw_disable_radio(priv);
-		IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
-		goto out;
+		if (!conf->radio_enabled) {
+			iwl_radio_kill_sw_disable_radio(priv);
+			IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
+			goto out;
+		}
 	}
 
 	if (iwl_is_rfkill(priv)) {
@@ -4546,11 +4550,6 @@ static ssize_t store_power_level(struct device *d,
 
 	mutex_lock(&priv->mutex);
 
-	if (!iwl_is_ready(priv)) {
-		ret = -EAGAIN;
-		goto out;
-	}
-
 	ret = strict_strtoul(buf, 10, &mode);
 	if (ret)
 		goto out;
@@ -4905,7 +4904,8 @@ static int iwl3945_setup_mac(struct iwl_priv *priv)
 
 	/* Tell mac80211 our characteristics */
 	hw->flags = IEEE80211_HW_SIGNAL_DBM |
-		    IEEE80211_HW_NOISE_DBM;
+		    IEEE80211_HW_NOISE_DBM |
+		    IEEE80211_HW_SPECTRUM_MGMT;
 
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_STATION) |
diff --git a/drivers/net/wireless/libertas/radiotap.h b/drivers/net/wireless/libertas/radiotap.h
index f8eb9097ff0a..d16b26416e82 100644
--- a/drivers/net/wireless/libertas/radiotap.h
+++ b/drivers/net/wireless/libertas/radiotap.h
@@ -33,22 +33,12 @@ struct rx_radiotap_hdr {
 	struct ieee80211_radiotap_header hdr;
 	u8 flags;
 	u8 rate;
-	u16 chan_freq;
-	u16 chan_flags;
-	u8 antenna;
 	u8 antsignal;
-	u16 rx_flags;
-#if 0
-	u8 pad[IEEE80211_RADIOTAP_HDRLEN - 18];
-#endif
 } __attribute__ ((packed));
 
 #define RX_RADIOTAP_PRESENT (			\
 	(1 << IEEE80211_RADIOTAP_FLAGS) |	\
 	(1 << IEEE80211_RADIOTAP_RATE) |	\
-	(1 << IEEE80211_RADIOTAP_CHANNEL) |	\
-	(1 << IEEE80211_RADIOTAP_ANTENNA) |	\
 	(1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) |\
-	(1 << IEEE80211_RADIOTAP_RX_FLAGS) |	\
 	0)
 
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 4f60948dde9c..63d7e19ce9bd 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -351,19 +351,11 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
 	radiotap_hdr.hdr.it_pad = 0;
 	radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr));
 	radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT);
-	/* unknown values */
-	radiotap_hdr.flags = 0;
-	radiotap_hdr.chan_freq = 0;
-	radiotap_hdr.chan_flags = 0;
-	radiotap_hdr.antenna = 0;
-	/* known values */
+	if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
+		radiotap_hdr.flags |= IEEE80211_RADIOTAP_F_BADFCS;
 	radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate);
 	/* XXX must check no carryout */
 	radiotap_hdr.antsignal = prxpd->snr + prxpd->nf;
-	radiotap_hdr.rx_flags = 0;
-	if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
-		radiotap_hdr.rx_flags |= IEEE80211_RADIOTAP_F_RX_BADFCS;
-	//memset(radiotap_hdr.pad, 0x11, IEEE80211_RADIOTAP_HDRLEN - 18);
 
 	/* chop the rxpd */
 	skb_pull(skb, sizeof(struct rxpd));
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 2368b7f825a2..d4fdc8b7d7d8 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -933,7 +933,6 @@ static int __init init_mac80211_hwsim(void)
 			BIT(NL80211_IFTYPE_STATION) |
 			BIT(NL80211_IFTYPE_AP) |
 			BIT(NL80211_IFTYPE_MESH_POINT);
-		hw->ampdu_queues = 1;
 
 		hw->flags = IEEE80211_HW_MFP_CAPABLE;
 
@@ -1041,6 +1040,9 @@ static int __init init_mac80211_hwsim(void)
 			break;
 		}
 
+		/* give the regulatory workqueue a chance to run */
+		if (regtest)
+			schedule_timeout_interruptible(1);
 		err = ieee80211_register_hw(hw);
 		if (err < 0) {
 			printk(KERN_DEBUG "mac80211_hwsim: "
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index cfc5f41aa136..b45d6a4ed1e8 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -1,9 +1,10 @@
 config P54_COMMON
 	tristate "Softmac Prism54 support"
-	depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL
+	depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
+	select FW_LOADER
 	---help---
-	  This is common code for isl38xx based cards.
-	  This module does nothing by itself - the USB/PCI frontends
+	  This is common code for isl38xx/stlc45xx based modules.
+	  This module does nothing by itself - the USB/PCI/SPI front-ends
 	  also need to be enabled in order to support any devices.
 
 	  These devices require softmac firmware which can be found at
@@ -17,31 +18,6 @@ config P54_USB
 	select CRC32
 	---help---
 	  This driver is for USB isl38xx based wireless cards.
-	  These are USB based adapters found in devices such as:
-
-	  3COM 3CRWE254G72
-	  SMC 2862W-G
-	  Accton 802.11g WN4501 USB
-	  Siemens Gigaset USB
-	  Netgear WG121
-	  Netgear WG111
-	  Medion 40900, Roper Europe
-	  Shuttle PN15, Airvast WM168g, IOGear GWU513
-	  Linksys WUSB54G
-	  Linksys WUSB54G Portable
-	  DLink DWL-G120 Spinnaker
-	  DLink DWL-G122
-	  Belkin F5D7050 ver 1000
-	  Cohiba Proto board
-	  SMC 2862W-G version 2
-	  U.S. Robotics U5 802.11g Adapter
-	  FUJITSU E-5400 USB D1700
-	  Sagem XG703A
-	  DLink DWL-G120 Cohiba
-	  Spinnaker Proto board
-	  Linksys WUSB54AG
-	  Inventel UR054G
-	  Spinnaker DUT
 
 	  These devices require softmac firmware which can be found at
 	  http://prism54.org/
@@ -64,10 +40,15 @@ config P54_PCI
 
 config P54_SPI
 	tristate "Prism54 SPI (stlc45xx) support"
-	depends on P54_COMMON && SPI_MASTER
+	depends on P54_COMMON && SPI_MASTER && GENERIC_HARDIRQS
 	---help---
 	  This driver is for stlc4550 or stlc4560 based wireless chips.
 	  This driver is experimental, untested and will probably only work on
 	  Nokia's N800/N810 Portable Internet Tablet.
 
 	  If you choose to build a module, it'll be called p54spi.
+
+config P54_LEDS
+	bool
+	depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON)
+	default y
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 0a989834b70d..0c1b0577d4ee 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -21,9 +21,9 @@
 #include <linux/etherdevice.h>
 
 #include <net/mac80211.h>
-#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
 #include <linux/leds.h>
-#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
 
 #include "p54.h"
 #include "p54common.h"
@@ -2420,7 +2420,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
 	return 0;
 }
 
-#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
 static void p54_led_brightness_set(struct led_classdev *led_dev,
 				   enum led_brightness brightness)
 {
@@ -2508,7 +2508,7 @@ static void p54_unregister_leds(struct ieee80211_hw *dev)
 	if (priv->assoc_led.registered)
 		led_classdev_unregister(&priv->assoc_led.led_dev);
 }
-#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
 
 static const struct ieee80211_ops p54_ops = {
 	.tx			= p54_tx,
@@ -2592,11 +2592,11 @@ int p54_register_common(struct ieee80211_hw *dev, struct device *pdev)
 		return err;
 	}
 
-	#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
 	err = p54_init_leds(dev);
 	if (err)
 		return err;
-	#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
 
 	dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy));
 	return 0;
@@ -2610,9 +2610,9 @@ void p54_free_common(struct ieee80211_hw *dev)
 	kfree(priv->output_limit);
 	kfree(priv->curve_data);
 
-	#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
 	p54_unregister_leds(dev);
-	#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
 }
 EXPORT_SYMBOL_GPL(p54_free_common);
 
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 24fdfdfee3df..420fff42c0dd 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2425,6 +2425,8 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Surecom */
 	{ USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Tilgin */
+	{ USB_DEVICE(0x6933, 0x5001), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Philips */
 	{ USB_DEVICE(0x0471, 0x200a), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Planex */
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index b728541f2fb5..3ab3eb957189 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -735,9 +735,9 @@ if (lp->tx_n_in_use > 0)
 		if (tx_status & AC_SFLD_OK) {
 			int ncollisions;
 
-			lp->stats.tx_packets++;
+			dev->stats.tx_packets++;
 			ncollisions = tx_status & AC_SFLD_MAXCOL;
-			lp->stats.collisions += ncollisions;
+			dev->stats.collisions += ncollisions;
 #ifdef DEBUG_TX_INFO
 			if (ncollisions > 0)
 				printk(KERN_DEBUG
@@ -745,9 +745,9 @@ if (lp->tx_n_in_use > 0)
 				       dev->name, ncollisions);
 #endif
 		} else {
-			lp->stats.tx_errors++;
+			dev->stats.tx_errors++;
 			if (tx_status & AC_SFLD_S10) {
-				lp->stats.tx_carrier_errors++;
+				dev->stats.tx_carrier_errors++;
 #ifdef DEBUG_TX_FAIL
 				printk(KERN_DEBUG
 				       "%s: wv_complete(): tx error: no CS.\n",
@@ -755,7 +755,7 @@ if (lp->tx_n_in_use > 0)
 #endif
 			}
 			if (tx_status & AC_SFLD_S9) {
-				lp->stats.tx_carrier_errors++;
+				dev->stats.tx_carrier_errors++;
 #ifdef DEBUG_TX_FAIL
 				printk(KERN_DEBUG
 				       "%s: wv_complete(): tx error: lost CTS.\n",
@@ -763,7 +763,7 @@ if (lp->tx_n_in_use > 0)
 #endif
 			}
 			if (tx_status & AC_SFLD_S8) {
-				lp->stats.tx_fifo_errors++;
+				dev->stats.tx_fifo_errors++;
 #ifdef DEBUG_TX_FAIL
 				printk(KERN_DEBUG
 				       "%s: wv_complete(): tx error: slow DMA.\n",
@@ -771,7 +771,7 @@ if (lp->tx_n_in_use > 0)
 #endif
 			}
 			if (tx_status & AC_SFLD_S6) {
-				lp->stats.tx_heartbeat_errors++;
+				dev->stats.tx_heartbeat_errors++;
 #ifdef DEBUG_TX_FAIL
 				printk(KERN_DEBUG
 				       "%s: wv_complete(): tx error: heart beat.\n",
@@ -779,7 +779,7 @@ if (lp->tx_n_in_use > 0)
 #endif
 			}
 			if (tx_status & AC_SFLD_S5) {
-				lp->stats.tx_aborted_errors++;
+				dev->stats.tx_aborted_errors++;
 #ifdef DEBUG_TX_FAIL
 				printk(KERN_DEBUG
 				       "%s: wv_complete(): tx error: too many collisions.\n",
@@ -1346,20 +1346,6 @@ static void wv_init_info(struct net_device * dev)
  * or wireless extensions
  */
 
-/*------------------------------------------------------------------*/
-/*
- * Get the current Ethernet statistics. This may be called with the
- * card open or closed.
- * Used when the user read /proc/net/dev
- */
-static en_stats *wavelan_get_stats(struct net_device * dev)
-{
-#ifdef DEBUG_IOCTL_TRACE
-	printk(KERN_DEBUG "%s: <>wavelan_get_stats()\n", dev->name);
-#endif
-
-	return &((net_local *)netdev_priv(dev))->stats;
-}
 
 /*------------------------------------------------------------------*/
 /*
@@ -2466,7 +2452,7 @@ wv_packet_read(struct net_device * dev, u16 buf_off, int sksize)
 		       "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC).\n",
 		       dev->name, sksize);
 #endif
-		lp->stats.rx_dropped++;
+		dev->stats.rx_dropped++;
 		return;
 	}
 
@@ -2526,8 +2512,8 @@ wv_packet_read(struct net_device * dev, u16 buf_off, int sksize)
 	netif_rx(skb);
 
 	/* Keep statistics up to date */
-	lp->stats.rx_packets++;
-	lp->stats.rx_bytes += sksize;
+	dev->stats.rx_packets++;
+	dev->stats.rx_bytes += sksize;
 
 #ifdef DEBUG_RX_TRACE
 	printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name);
@@ -2608,7 +2594,7 @@ static void wv_receive(struct net_device * dev)
 #endif
 		} else {	/* If reception was no successful */
 
-			lp->stats.rx_errors++;
+			dev->stats.rx_errors++;
 
 #ifdef DEBUG_RX_INFO
 			printk(KERN_DEBUG
@@ -2624,7 +2610,7 @@ static void wv_receive(struct net_device * dev)
 #endif
 
 			if ((fd.fd_status & FD_STATUS_S7) != 0) {
-				lp->stats.rx_length_errors++;
+				dev->stats.rx_length_errors++;
 #ifdef DEBUG_RX_FAIL
 				printk(KERN_DEBUG
 				       "%s: wv_receive(): frame too short.\n",
@@ -2633,7 +2619,7 @@ static void wv_receive(struct net_device * dev)
 			}
 
 			if ((fd.fd_status & FD_STATUS_S8) != 0) {
-				lp->stats.rx_over_errors++;
+				dev->stats.rx_over_errors++;
 #ifdef DEBUG_RX_FAIL
 				printk(KERN_DEBUG
 				       "%s: wv_receive(): rx DMA overrun.\n",
@@ -2642,7 +2628,7 @@ static void wv_receive(struct net_device * dev)
 			}
 
 			if ((fd.fd_status & FD_STATUS_S9) != 0) {
-				lp->stats.rx_fifo_errors++;
+				dev->stats.rx_fifo_errors++;
 #ifdef DEBUG_RX_FAIL
 				printk(KERN_DEBUG
 				       "%s: wv_receive(): ran out of resources.\n",
@@ -2651,7 +2637,7 @@ static void wv_receive(struct net_device * dev)
 			}
 
 			if ((fd.fd_status & FD_STATUS_S10) != 0) {
-				lp->stats.rx_frame_errors++;
+				dev->stats.rx_frame_errors++;
 #ifdef DEBUG_RX_FAIL
 				printk(KERN_DEBUG
 				       "%s: wv_receive(): alignment error.\n",
@@ -2660,7 +2646,7 @@ static void wv_receive(struct net_device * dev)
 			}
 
 			if ((fd.fd_status & FD_STATUS_S11) != 0) {
-				lp->stats.rx_crc_errors++;
+				dev->stats.rx_crc_errors++;
 #ifdef DEBUG_RX_FAIL
 				printk(KERN_DEBUG
 				       "%s: wv_receive(): CRC error.\n",
@@ -2826,7 +2812,7 @@ static int wv_packet_write(struct net_device * dev, void *buf, short length)
 	dev->trans_start = jiffies;
 
 	/* Keep stats up to date. */
-	lp->stats.tx_bytes += length;
+	dev->stats.tx_bytes += length;
 
 	if (lp->tx_first_in_use == I82586NULL)
 		lp->tx_first_in_use = txblock;
@@ -4038,6 +4024,22 @@ static int wavelan_close(struct net_device * dev)
 	return 0;
 }
 
+static const struct net_device_ops wavelan_netdev_ops = {
+	.ndo_open 		= wavelan_open,
+	.ndo_stop 		= wavelan_close,
+	.ndo_start_xmit		= wavelan_packet_xmit,
+	.ndo_set_multicast_list = wavelan_set_multicast_list,
+        .ndo_tx_timeout		= wavelan_watchdog,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef SET_MAC_ADDRESS
+	.ndo_set_mac_address	= wavelan_set_mac_address
+#else
+	.ndo_set_mac_address 	= eth_mac_addr,
+#endif
+};
+
+
 /*------------------------------------------------------------------*/
 /*
  * Probe an I/O address, and if the WaveLAN is there configure the
@@ -4130,17 +4132,8 @@ static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr)
 	/* Init spinlock */
 	spin_lock_init(&lp->spinlock);
 
-	dev->open = wavelan_open;
-	dev->stop = wavelan_close;
-	dev->hard_start_xmit = wavelan_packet_xmit;
-	dev->get_stats = wavelan_get_stats;
-	dev->set_multicast_list = &wavelan_set_multicast_list;
-        dev->tx_timeout		= &wavelan_watchdog;
-        dev->watchdog_timeo	= WATCHDOG_JIFFIES;
-#ifdef SET_MAC_ADDRESS
-	dev->set_mac_address = &wavelan_set_mac_address;
-#endif				/* SET_MAC_ADDRESS */
-
+	dev->netdev_ops = &wavelan_netdev_ops;
+	dev->watchdog_timeo = WATCHDOG_JIFFIES;
 	dev->wireless_handlers = &wavelan_handler_def;
 	lp->wireless_data.spy_data = &lp->spy_data;
 	dev->wireless_data = &lp->wireless_data;
diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h
index 44d31bbf39e4..2daa0210d789 100644
--- a/drivers/net/wireless/wavelan.p.h
+++ b/drivers/net/wireless/wavelan.p.h
@@ -459,11 +459,9 @@ static const char	*version	= "wavelan.c : v24 (SMP + wireless extensions) 11/12/
 /****************************** TYPES ******************************/
 
 /* Shortcuts */
-typedef struct net_device_stats	en_stats;
 typedef struct iw_statistics	iw_stats;
 typedef struct iw_quality	iw_qual;
-typedef struct iw_freq		iw_freq;
-typedef struct net_local	net_local;
+typedef struct iw_freq		iw_freq;typedef struct net_local	net_local;
 typedef struct timer_list	timer_list;
 
 /* Basic types */
@@ -475,15 +473,12 @@ typedef u_char		mac_addr[WAVELAN_ADDR_SIZE];	/* Hardware address */
  * For each network interface, Linux keeps data in two structures:  "device"
  * keeps the generic data (same format for everybody) and "net_local" keeps
  * additional specific data.
- * Note that some of this specific data is in fact generic (en_stats, for
- * example).
  */
 struct net_local
 {
   net_local *	next;		/* linked list of the devices */
   struct net_device *	dev;		/* reverse link */
   spinlock_t	spinlock;	/* Serialize access to the hardware (SMP) */
-  en_stats	stats;		/* Ethernet interface statistics */
   int		nresets;	/* number of hardware resets */
   u_char	reconfig_82586;	/* We need to reconfigure the controller. */
   u_char	promiscuous;	/* promiscuous mode */
@@ -601,8 +596,6 @@ static void
 static inline void
 	wv_init_info(struct net_device *);	/* display startup info */
 /* ------------------- IOCTL, STATS & RECONFIG ------------------- */
-static en_stats	*
-	wavelan_get_stats(struct net_device *);	/* Give stats /proc/net/dev */
 static iw_stats *
 	wavelan_get_wireless_stats(struct net_device *);
 static void
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index b1b947edcf01..540a2948596c 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -53,11 +53,11 @@ config SSB_B43_PCI_BRIDGE
 
 config SSB_PCMCIAHOST_POSSIBLE
 	bool
-	depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL
+	depends on SSB && (PCMCIA = y || PCMCIA = SSB)
 	default y
 
 config SSB_PCMCIAHOST
-	bool "Support for SSB on PCMCIA-bus host (EXPERIMENTAL)"
+	bool "Support for SSB on PCMCIA-bus host"
 	depends on SSB_PCMCIAHOST_POSSIBLE
 	select SSB_SPROM
 	help
@@ -107,14 +107,14 @@ config SSB_DRIVER_PCICORE
 	  If unsure, say Y
 
 config SSB_PCICORE_HOSTMODE
-	bool "Hostmode support for SSB PCI core (EXPERIMENTAL)"
-	depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS && EXPERIMENTAL
+	bool "Hostmode support for SSB PCI core"
+	depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS
 	help
 	  PCIcore hostmode operation (external PCI bus).
 
 config SSB_DRIVER_MIPS
-	bool "SSB Broadcom MIPS core driver (EXPERIMENTAL)"
-	depends on SSB && MIPS && EXPERIMENTAL
+	bool "SSB Broadcom MIPS core driver"
+	depends on SSB && MIPS
 	select SSB_SERIAL
 	help
 	  Driver for the Sonics Silicon Backplane attached
@@ -129,8 +129,8 @@ config SSB_EMBEDDED
 	default y
 
 config SSB_DRIVER_EXTIF
-	bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)"
-	depends on SSB_DRIVER_MIPS && EXPERIMENTAL
+	bool "SSB Broadcom EXTIF core driver"
+	depends on SSB_DRIVER_MIPS
 	help
 	  Driver for the Sonics Silicon Backplane attached
 	  Broadcom EXTIF core.
diff --git a/drivers/ssb/b43_pci_bridge.c b/drivers/ssb/b43_pci_bridge.c
index 27a677584a4c..ef9c6a04ad8f 100644
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -18,6 +18,7 @@
 
 static const struct pci_device_id b43_pci_bridge_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4301) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4306) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4307) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4311) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
author	Linus Torvalds <torvalds@linux-foundation.org>	2009-03-27 18:35:03 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2009-03-27 18:35:03 -0700
commit	5d80f8e5a9dc9c9a94d4aeaa567e219a808b8a4a (patch)
tree	357258d77e2153ef7409926773655c5f8775a1f3 /drivers
parent	7b616c8a2f5c8507b4aed6907336ec5b85803a39 (diff)
parent	0870352bc6e0dee485c86a0c99dd60e7089c8917 (diff)
download	linux-5d80f8e5a9dc9c9a94d4aeaa567e219a808b8a4a.tar.bz2