summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorAlexey Mednyy <swexru@gmail.com>2016-01-27 12:04:23 +0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-02-07 19:43:05 -0800
commit5795354f75132a891ff21a7d7681827dce9ff4bb (patch)
tree040edcfde2b7bc4231f51a3274af2305fe509871 /drivers
parentf6bfc25ee0f60aa6ada33b3948a9aa3aecc6ef6a (diff)
downloadlinux-5795354f75132a891ff21a7d7681827dce9ff4bb.tar.bz2
Staging: fbtft: add ssd1305 controller support
That patch adds support for SSD1305 controller. That is monochrome OLED display controller present in several displays eq: Winstar WEX012864 Signed-off-by: Alexey Mednyy <swexru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/staging/fbtft/Kconfig6
-rw-r--r--drivers/staging/fbtft/Makefile1
-rw-r--r--drivers/staging/fbtft/fb_ssd1305.c216
3 files changed, 223 insertions, 0 deletions
diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig
index 883ff5b8fdab..0bfc7764312e 100644
--- a/drivers/staging/fbtft/Kconfig
+++ b/drivers/staging/fbtft/Kconfig
@@ -117,6 +117,12 @@ config FB_TFT_SSD1289
help
Framebuffer support for SSD1289
+config FB_TFT_SSD1305
+ tristate "FB driver for the SSD1305 OLED Controller"
+ depends on FB_TFT
+ help
+ Framebuffer support for SSD1305
+
config FB_TFT_SSD1306
tristate "FB driver for the SSD1306 OLED Controller"
depends on FB_TFT
diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile
index 4f9071d96d01..1ddc764039a0 100644
--- a/drivers/staging/fbtft/Makefile
+++ b/drivers/staging/fbtft/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_FB_TFT_RA8875) += fb_ra8875.o
obj-$(CONFIG_FB_TFT_S6D02A1) += fb_s6d02a1.o
obj-$(CONFIG_FB_TFT_S6D1121) += fb_s6d1121.o
obj-$(CONFIG_FB_TFT_SSD1289) += fb_ssd1289.o
+obj-$(CONFIG_FB_TFT_SSD1305) += fb_ssd1305.o
obj-$(CONFIG_FB_TFT_SSD1306) += fb_ssd1306.o
obj-$(CONFIG_FB_TFT_SSD1331) += fb_ssd1331.o
obj-$(CONFIG_FB_TFT_SSD1351) += fb_ssd1351.o
diff --git a/drivers/staging/fbtft/fb_ssd1305.c b/drivers/staging/fbtft/fb_ssd1305.c
new file mode 100644
index 000000000000..4b38c3fadd60
--- /dev/null
+++ b/drivers/staging/fbtft/fb_ssd1305.c
@@ -0,0 +1,216 @@
+/*
+ * FB driver for the SSD1305 OLED Controller
+ *
+ * based on SSD1306 driver by Noralf Tronnes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include "fbtft.h"
+
+#define DRVNAME "fb_ssd1305"
+
+#define WIDTH 128
+#define HEIGHT 64
+
+/*
+ * write_reg() caveat:
+ *
+ * This doesn't work because D/C has to be LOW for both values:
+ * write_reg(par, val1, val2);
+ *
+ * Do it like this:
+ * write_reg(par, val1);
+ * write_reg(par, val2);
+ */
+
+/* Init sequence taken from the Adafruit SSD1306 Arduino library */
+static int init_display(struct fbtft_par *par)
+{
+ par->fbtftops.reset(par);
+
+ if (par->gamma.curves[0] == 0) {
+ mutex_lock(&par->gamma.lock);
+ if (par->info->var.yres == 64)
+ par->gamma.curves[0] = 0xCF;
+ else
+ par->gamma.curves[0] = 0x8F;
+ mutex_unlock(&par->gamma.lock);
+ }
+
+ /* Set Display OFF */
+ write_reg(par, 0xAE);
+
+ /* Set Display Clock Divide Ratio/ Oscillator Frequency */
+ write_reg(par, 0xD5);
+ write_reg(par, 0x80);
+
+ /* Set Multiplex Ratio */
+ write_reg(par, 0xA8);
+ if (par->info->var.yres == 64)
+ write_reg(par, 0x3F);
+ else
+ write_reg(par, 0x1F);
+
+ /* Set Display Offset */
+ write_reg(par, 0xD3);
+ write_reg(par, 0x0);
+
+ /* Set Display Start Line */
+ write_reg(par, 0x40 | 0x0);
+
+ /* Charge Pump Setting */
+ write_reg(par, 0x8D);
+ /* A[2] = 1b, Enable charge pump during display on */
+ write_reg(par, 0x14);
+
+ /* Set Memory Addressing Mode */
+ write_reg(par, 0x20);
+ /* Vertical addressing mode */
+ write_reg(par, 0x01);
+
+ /*
+ * Set Segment Re-map
+ * column address 127 is mapped to SEG0
+ */
+ write_reg(par, 0xA0 | ((par->info->var.rotate == 180) ? 0x0 : 0x1));
+
+ /*
+ * Set COM Output Scan Direction
+ * remapped mode. Scan from COM[N-1] to COM0
+ */
+ write_reg(par, ((par->info->var.rotate == 180) ? 0xC8 : 0xC0));
+
+ /* Set COM Pins Hardware Configuration */
+ write_reg(par, 0xDA);
+ if (par->info->var.yres == 64) {
+ /* A[4]=1b, Alternative COM pin configuration */
+ write_reg(par, 0x12);
+ } else {
+ /* A[4]=0b, Sequential COM pin configuration */
+ write_reg(par, 0x02);
+ }
+
+ /* Set Pre-charge Period */
+ write_reg(par, 0xD9);
+ write_reg(par, 0xF1);
+
+ /*
+ * Entire Display ON
+ * Resume to RAM content display. Output follows RAM content
+ */
+ write_reg(par, 0xA4);
+
+ /*
+ * Set Normal Display
+ * 0 in RAM: OFF in display panel
+ * 1 in RAM: ON in display panel
+ */
+ write_reg(par, 0xA6);
+
+ /* Set Display ON */
+ write_reg(par, 0xAF);
+
+ return 0;
+}
+
+static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
+{
+ /* Set Lower Column Start Address for Page Addressing Mode */
+ write_reg(par, 0x00 | ((par->info->var.rotate == 180) ? 0x0 : 0x4));
+ /* Set Higher Column Start Address for Page Addressing Mode */
+ write_reg(par, 0x10 | 0x0);
+ /* Set Display Start Line */
+ write_reg(par, 0x40 | 0x0);
+}
+
+static int blank(struct fbtft_par *par, bool on)
+{
+ if (on)
+ write_reg(par, 0xAE);
+ else
+ write_reg(par, 0xAF);
+ return 0;
+}
+
+/* Gamma is used to control Contrast */
+static int set_gamma(struct fbtft_par *par, unsigned long *curves)
+{
+ curves[0] &= 0xFF;
+ /* Set Contrast Control for BANK0 */
+ write_reg(par, 0x81);
+ write_reg(par, curves[0]);
+
+ return 0;
+}
+
+static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
+{
+ u16 *vmem16 = (u16 *)par->info->screen_buffer;
+ u8 *buf = par->txbuf.buf;
+ int x, y, i;
+ int ret;
+
+ for (x = 0; x < par->info->var.xres; x++) {
+ for (y = 0; y < par->info->var.yres / 8; y++) {
+ *buf = 0x00;
+ for (i = 0; i < 8; i++)
+ *buf |= (vmem16[(y * 8 + i) *
+ par->info->var.xres + x] ?
+ 1 : 0) << i;
+ buf++;
+ }
+ }
+
+ /* Write data */
+ gpio_set_value(par->gpio.dc, 1);
+ ret = par->fbtftops.write(par, par->txbuf.buf,
+ par->info->var.xres * par->info->var.yres /
+ 8);
+ if (ret < 0)
+ dev_err(par->info->device, "write failed and returned: %d\n",
+ ret);
+ return ret;
+}
+
+static struct fbtft_display display = {
+ .regwidth = 8,
+ .width = WIDTH,
+ .height = HEIGHT,
+ .txbuflen = WIDTH * HEIGHT / 8,
+ .gamma_num = 1,
+ .gamma_len = 1,
+ .gamma = "00",
+ .fbtftops = {
+ .write_vmem = write_vmem,
+ .init_display = init_display,
+ .set_addr_win = set_addr_win,
+ .blank = blank,
+ .set_gamma = set_gamma,
+ },
+};
+
+FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1305", &display);
+
+MODULE_ALIAS("spi:" DRVNAME);
+MODULE_ALIAS("platform:" DRVNAME);
+MODULE_ALIAS("spi:ssd1305");
+MODULE_ALIAS("platform:ssd1305");
+
+MODULE_DESCRIPTION("SSD1305 OLED Driver");
+MODULE_AUTHOR("Alexey Mednyy");
+MODULE_LICENSE("GPL");