Merge tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO fixes for the 5.19 cycle.

Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.

* testing
  - Fix a missing MODULE_LICENSE() warning by restricting possible build
    configs.
* Various drivers
  - Fix ordering of iio_get_trigger() being called before
    iio_trigger_register()
* adi,admv1014
  - Fix dubious x & !y warning.
* adi,axi-adc
  - Fix missing of_node_put() in error and normal paths.
* aspeed,adc
  - Add missing of_node_put()
* fsl,mma8452
  - Fix broken probing from device tree.
  - Drop check on return value of i2c write to device to cause reset as
    ACK will be missing (device reset before sending it).
* fsl,vf610
  - Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
  - Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
 - Disable regulators in error path.
* invensense,icm42600
  - Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
  - Add missing fwnode_handle_put() in error path.
* rescale
  - Fix a boolean logic bug for detection of raw + scale affecting an
    obscure corner case.
* semtech,sx9324
  - Check return value of read of pin_defs
* st,stm32-adc:
  - Fix interaction across ADC instances for some supported devices.
  - Drop false spurious IRQ messages.
  - Fix calibration value handling.  If we can't calibrate don't expose the
    vref_int channel.
  - Fix maximum clock rate for stm32pm15x
* ti,ads131e08
  - Add missing fwnode_handle_put() in error paths.
* xilinx,ams
  - Fix variable checked for error from platform_get_irq()
* x-powers,axp288
  - Overide TS_PIN bias current for boards where it is not correctly
    initialized.
* yamaha,yas530
  - Fix inverted check on calibration data being all zeros.

* tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
  iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
  iio: accel: mma8452: ignore the return value of reset operation
  iio: adc: stm32: fix maximum clock rate for stm32mp15x
  iio: adc: stm32: fix vrefint wrong calibration value handling
  iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
  iio: adc: vf610: fix conversion mode sysfs node name
  iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
  iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
  iio:humidity:hts221: rearrange iio trigger get and register
  iio:chemical:ccs811: rearrange iio trigger get and register
  iio:accel:mxc4005: rearrange iio trigger get and register
  iio:accel:kxcjk-1013: rearrange iio trigger get and register
  iio:accel:bma180: rearrange iio trigger get and register
  iio: afe: rescale: Fix boolean logic bug
  iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
  iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
  iio: adc: stm32: Fix ADCs iteration in irq handler
  iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
  iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
  iio: trigger: sysfs: fix use-after-free on remove
  ...

24 files changed, 91 insertions, 51 deletions

diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 4f73bc827eec..9c9e98578667 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -1006,11 +1006,12 @@ static int bma180_probe(struct i2c_client *client,
 
 		data->trig->ops = &bma180_trigger_ops;
 		iio_trigger_set_drvdata(data->trig, indio_dev);
-		indio_dev->trig = iio_trigger_get(data->trig);
 
 		ret = iio_trigger_register(data->trig);
 		if (ret)
 			goto err_trigger_free;
+
+		indio_dev->trig = iio_trigger_get(data->trig);
 	}
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index ac74cdcd2bc8..748b35c2f0c3 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1554,12 +1554,12 @@ static int kxcjk1013_probe(struct i2c_client *client,
 
 		data->dready_trig->ops = &kxcjk1013_trigger_ops;
 		iio_trigger_set_drvdata(data->dready_trig, indio_dev);
-		indio_dev->trig = data->dready_trig;
-		iio_trigger_get(indio_dev->trig);
 		ret = iio_trigger_register(data->dready_trig);
 		if (ret)
 			goto err_poweroff;
 
+		indio_dev->trig = iio_trigger_get(data->dready_trig);
+
 		data->motion_trig->ops = &kxcjk1013_trigger_ops;
 		iio_trigger_set_drvdata(data->motion_trig, indio_dev);
 		ret = iio_trigger_register(data->motion_trig);
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 912a447e6310..c7d9ca96dbaa 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1511,10 +1511,14 @@ static int mma8452_reset(struct i2c_client *client)
 	int i;
 	int ret;
 
-	ret = i2c_smbus_write_byte_data(client,	MMA8452_CTRL_REG2,
+	/*
+	 * Find on fxls8471, after config reset bit, it reset immediately,
+	 * and will not give ACK, so here do not check the return value.
+	 * The following code will read the reset register, and check whether
+	 * this reset works.
+	 */
+	i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2,
 					MMA8452_CTRL_REG2_RST);
-	if (ret < 0)
-		return ret;
 
 	for (i = 0; i < 10; i++) {
 		usleep_range(100, 200);
@@ -1557,11 +1561,13 @@ static int mma8452_probe(struct i2c_client *client,
 	mutex_init(&data->lock);
 
 	data->chip_info = device_get_match_data(&client->dev);
-	if (!data->chip_info && id) {
-		data->chip_info = &mma_chip_info_table[id->driver_data];
-	} else {
-		dev_err(&client->dev, "unknown device model\n");
-		return -ENODEV;
+	if (!data->chip_info) {
+		if (id) {
+			data->chip_info = &mma_chip_info_table[id->driver_data];
+		} else {
+			dev_err(&client->dev, "unknown device model\n");
+			return -ENODEV;
+		}
 	}
 
 	ret = iio_read_mount_matrix(&client->dev, &data->orientation);
diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c
index b3afbf064915..df600d2917c0 100644
--- a/drivers/iio/accel/mxc4005.c
+++ b/drivers/iio/accel/mxc4005.c
@@ -456,8 +456,6 @@ static int mxc4005_probe(struct i2c_client *client,
 
 		data->dready_trig->ops = &mxc4005_trigger_ops;
 		iio_trigger_set_drvdata(data->dready_trig, indio_dev);
-		indio_dev->trig = data->dready_trig;
-		iio_trigger_get(indio_dev->trig);
 		ret = devm_iio_trigger_register(&client->dev,
 						data->dready_trig);
 		if (ret) {
@@ -465,6 +463,8 @@ static int mxc4005_probe(struct i2c_client *client,
 				"failed to register trigger\n");
 			return ret;
 		}
+
+		indio_dev->trig = iio_trigger_get(data->dready_trig);
 	}
 
 	return devm_iio_device_register(&client->dev, indio_dev);
diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
index a73e3c2d212f..a9e655e69eaa 100644
--- a/drivers/iio/adc/adi-axi-adc.c
+++ b/drivers/iio/adc/adi-axi-adc.c
@@ -322,16 +322,19 @@ static struct adi_axi_adc_client *adi_axi_adc_attach_client(struct device *dev)
 
 		if (!try_module_get(cl->dev->driver->owner)) {
 			mutex_unlock(&registered_clients_lock);
+			of_node_put(cln);
 			return ERR_PTR(-ENODEV);
 		}
 
 		get_device(cl->dev);
 		cl->info = info;
 		mutex_unlock(&registered_clients_lock);
+		of_node_put(cln);
 		return cl;
 	}
 
 	mutex_unlock(&registered_clients_lock);
+	of_node_put(cln);
 
 	return ERR_PTR(-EPROBE_DEFER);
 }
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index 0793d2474cdc..9341e0e0eb55 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -186,6 +186,7 @@ static int aspeed_adc_set_trim_data(struct iio_dev *indio_dev)
 		return -EOPNOTSUPP;
 	}
 	scu = syscon_node_to_regmap(syscon);
+	of_node_put(syscon);
 	if (IS_ERR(scu)) {
 		dev_warn(data->dev, "Failed to get syscon regmap\n");
 		return -EOPNOTSUPP;
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index a4b8be5b8f88..580361bd9849 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -196,6 +196,14 @@ static const struct dmi_system_id axp288_adc_ts_bias_override[] = {
 		},
 		.driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA,
 	},
+	{
+		/* Nuvision Solo 10 Draw */
+		.matches = {
+		  DMI_MATCH(DMI_SYS_VENDOR, "TMAX"),
+		  DMI_MATCH(DMI_PRODUCT_NAME, "TM101W610L"),
+		},
+		.driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA,
+	},
 	{}
 };
 
diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c
index 7585144b9715..5b09a93fdf34 100644
--- a/drivers/iio/adc/rzg2l_adc.c
+++ b/drivers/iio/adc/rzg2l_adc.c
@@ -334,11 +334,15 @@ static int rzg2l_adc_parse_properties(struct platform_device *pdev, struct rzg2l
 	i = 0;
 	device_for_each_child_node(&pdev->dev, fwnode) {
 		ret = fwnode_property_read_u32(fwnode, "reg", &channel);
-		if (ret)
+		if (ret) {
+			fwnode_handle_put(fwnode);
 			return ret;
+		}
 
-		if (channel >= RZG2L_ADC_MAX_CHANNELS)
+		if (channel >= RZG2L_ADC_MAX_CHANNELS) {
+			fwnode_handle_put(fwnode);
 			return -EINVAL;
+		}
 
 		chan_array[i].type = IIO_VOLTAGE;
 		chan_array[i].indexed = 1;
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 142656232157..3efb8c404ccc 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -64,6 +64,7 @@ struct stm32_adc_priv;
  * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
  * @has_syscfg: SYSCFG capability flags
  * @num_irqs:	number of interrupt lines
+ * @num_adcs:   maximum number of ADC instances in the common registers
  */
 struct stm32_adc_priv_cfg {
 	const struct stm32_adc_common_regs *regs;
@@ -71,6 +72,7 @@ struct stm32_adc_priv_cfg {
 	u32 max_clk_rate_hz;
 	unsigned int has_syscfg;
 	unsigned int num_irqs;
+	unsigned int num_adcs;
 };
 
 /**
@@ -352,7 +354,7 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
 	 * before invoking the interrupt handler (e.g. call ISR only for
 	 * IRQ-enabled ADCs).
 	 */
-	for (i = 0; i < priv->cfg->num_irqs; i++) {
+	for (i = 0; i < priv->cfg->num_adcs; i++) {
 		if ((status & priv->cfg->regs->eoc_msk[i] &&
 		     stm32_adc_eoc_enabled(priv, i)) ||
 		     (status & priv->cfg->regs->ovr_msk[i]))
@@ -792,6 +794,7 @@ static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
 	.clk_sel = stm32f4_adc_clk_sel,
 	.max_clk_rate_hz = 36000000,
 	.num_irqs = 1,
+	.num_adcs = 3,
 };
 
 static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
@@ -800,14 +803,16 @@ static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
 	.max_clk_rate_hz = 36000000,
 	.has_syscfg = HAS_VBOOSTER,
 	.num_irqs = 1,
+	.num_adcs = 2,
 };
 
 static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
 	.regs = &stm32h7_adc_common_regs,
 	.clk_sel = stm32h7_adc_clk_sel,
-	.max_clk_rate_hz = 40000000,
+	.max_clk_rate_hz = 36000000,
 	.has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD,
 	.num_irqs = 2,
+	.num_adcs = 2,
 };
 
 static const struct of_device_id stm32_adc_of_match[] = {
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index a68ecbda6480..11ef873d6453 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1365,7 +1365,7 @@ static int stm32_adc_read_raw(struct iio_dev *indio_dev,
 		else
 			ret = -EINVAL;
 
-		if (mask == IIO_CHAN_INFO_PROCESSED && adc->vrefint.vrefint_cal)
+		if (mask == IIO_CHAN_INFO_PROCESSED)
 			*val = STM32_ADC_VREFINT_VOLTAGE * adc->vrefint.vrefint_cal / *val;
 
 		iio_device_release_direct_mode(indio_dev);
@@ -1407,7 +1407,6 @@ static irqreturn_t stm32_adc_threaded_isr(int irq, void *data)
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	const struct stm32_adc_regspec *regs = adc->cfg->regs;
 	u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
-	u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
 
 	/* Check ovr status right now, as ovr mask should be already disabled */
 	if (status & regs->isr_ovr.mask) {
@@ -1422,11 +1421,6 @@ static irqreturn_t stm32_adc_threaded_isr(int irq, void *data)
 		return IRQ_HANDLED;
 	}
 
-	if (!(status & mask))
-		dev_err_ratelimited(&indio_dev->dev,
-				    "Unexpected IRQ: IER=0x%08x, ISR=0x%08x\n",
-				    mask, status);
-
 	return IRQ_NONE;
 }
 
@@ -1436,10 +1430,6 @@ static irqreturn_t stm32_adc_isr(int irq, void *data)
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	const struct stm32_adc_regspec *regs = adc->cfg->regs;
 	u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
-	u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
-
-	if (!(status & mask))
-		return IRQ_WAKE_THREAD;
 
 	if (status & regs->isr_ovr.mask) {
 		/*
@@ -1979,10 +1969,10 @@ static int stm32_adc_populate_int_ch(struct iio_dev *indio_dev, const char *ch_n
 
 	for (i = 0; i < STM32_ADC_INT_CH_NB; i++) {
 		if (!strncmp(stm32_adc_ic[i].name, ch_name, STM32_ADC_CH_SZ)) {
-			adc->int_ch[i] = chan;
-
-			if (stm32_adc_ic[i].idx != STM32_ADC_INT_CH_VREFINT)
-				continue;
+			if (stm32_adc_ic[i].idx != STM32_ADC_INT_CH_VREFINT) {
+				adc->int_ch[i] = chan;
+				break;
+			}
 
 			/* Get calibration data for vrefint channel */
 			ret = nvmem_cell_read_u16(&indio_dev->dev, "vrefint", &vrefint);
@@ -1990,10 +1980,15 @@ static int stm32_adc_populate_int_ch(struct iio_dev *indio_dev, const char *ch_n
 				return dev_err_probe(indio_dev->dev.parent, ret,
 						     "nvmem access error\n");
 			}
-			if (ret == -ENOENT)
-				dev_dbg(&indio_dev->dev, "vrefint calibration not found\n");
-			else
-				adc->vrefint.vrefint_cal = vrefint;
+			if (ret == -ENOENT) {
+				dev_dbg(&indio_dev->dev, "vrefint calibration not found. Skip vrefint channel\n");
+				return ret;
+			} else if (!vrefint) {
+				dev_dbg(&indio_dev->dev, "Null vrefint calibration value. Skip vrefint channel\n");
+				return -ENOENT;
+			}
+			adc->int_ch[i] = chan;
+			adc->vrefint.vrefint_cal = vrefint;
 		}
 	}
 
@@ -2030,7 +2025,9 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
 			}
 			strncpy(adc->chan_name[val], name, STM32_ADC_CH_SZ);
 			ret = stm32_adc_populate_int_ch(indio_dev, name, val);
-			if (ret)
+			if (ret == -ENOENT)
+				continue;
+			else if (ret)
 				goto err;
 		} else if (ret != -EINVAL) {
 			dev_err(&indio_dev->dev, "Invalid label %d\n", ret);
diff --git a/drivers/iio/adc/ti-ads131e08.c b/drivers/iio/adc/ti-ads131e08.c
index 0c2025a22575..80a09817c119 100644
--- a/drivers/iio/adc/ti-ads131e08.c
+++ b/drivers/iio/adc/ti-ads131e08.c
@@ -739,7 +739,7 @@ static int ads131e08_alloc_channels(struct iio_dev *indio_dev)
 	device_for_each_child_node(dev, node) {
 		ret = fwnode_property_read_u32(node, "reg", &channel);
 		if (ret)
-			return ret;
+			goto err_child_out;
 
 		ret = fwnode_property_read_u32(node, "ti,gain", &tmp);
 		if (ret) {
@@ -747,7 +747,7 @@ static int ads131e08_alloc_channels(struct iio_dev *indio_dev)
 		} else {
 			ret = ads131e08_pga_gain_to_field_value(st, tmp);
 			if (ret < 0)
-				return ret;
+				goto err_child_out;
 
 			channel_config[i].pga_gain = tmp;
 		}
@@ -758,7 +758,7 @@ static int ads131e08_alloc_channels(struct iio_dev *indio_dev)
 		} else {
 			ret = ads131e08_validate_channel_mux(st, tmp);
 			if (ret)
-				return ret;
+				goto err_child_out;
 
 			channel_config[i].mux = tmp;
 		}
@@ -784,6 +784,10 @@ static int ads131e08_alloc_channels(struct iio_dev *indio_dev)
 	st->channel_config = channel_config;
 
 	return 0;
+
+err_child_out:
+	fwnode_handle_put(node);
+	return ret;
 }
 
 static void ads131e08_regulator_disable(void *data)
diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c
index a55396c1f8b2..a7687706012d 100644
--- a/drivers/iio/adc/xilinx-ams.c
+++ b/drivers/iio/adc/xilinx-ams.c
@@ -1409,7 +1409,7 @@ static int ams_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
-		return ret;
+		return irq;
 
 	ret = devm_request_irq(&pdev->dev, irq, &ams_irq, 0, "ams-irq",
 			       indio_dev);
diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index c6cf709f0f05..6949d2151025 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -277,7 +277,7 @@ static int rescale_configure_channel(struct device *dev,
 	chan->ext_info = rescale->ext_info;
 	chan->type = rescale->cfg->type;
 
-	if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) ||
+	if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) &&
 	    iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE)) {
 		dev_info(dev, "using raw+scale source channel\n");
 	} else if (iio_channel_has_info(schan, IIO_CHAN_INFO_PROCESSED)) {
diff --git a/drivers/iio/chemical/ccs811.c b/drivers/iio/chemical/ccs811.c
index 847194fa1e46..80ef1aa9aae3 100644
--- a/drivers/iio/chemical/ccs811.c
+++ b/drivers/iio/chemical/ccs811.c
@@ -499,11 +499,11 @@ static int ccs811_probe(struct i2c_client *client,
 
 		data->drdy_trig->ops = &ccs811_trigger_ops;
 		iio_trigger_set_drvdata(data->drdy_trig, indio_dev);
-		indio_dev->trig = data->drdy_trig;
-		iio_trigger_get(indio_dev->trig);
 		ret = iio_trigger_register(data->drdy_trig);
 		if (ret)
 			goto err_poweroff;
+
+		indio_dev->trig = iio_trigger_get(data->drdy_trig);
 	}
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
diff --git a/drivers/iio/frequency/admv1014.c b/drivers/iio/frequency/admv1014.c
index a7994f8e6b9b..1aac5665b5de 100644
--- a/drivers/iio/frequency/admv1014.c
+++ b/drivers/iio/frequency/admv1014.c
@@ -700,8 +700,10 @@ static int admv1014_init(struct admv1014_state *st)
 			 ADMV1014_DET_EN_MSK;
 
 	enable_reg = FIELD_PREP(ADMV1014_P1DB_COMPENSATION_MSK, st->p1db_comp ? 3 : 0) |
-		     FIELD_PREP(ADMV1014_IF_AMP_PD_MSK, !(st->input_mode)) |
-		     FIELD_PREP(ADMV1014_BB_AMP_PD_MSK, st->input_mode) |
+		     FIELD_PREP(ADMV1014_IF_AMP_PD_MSK,
+				(st->input_mode == ADMV1014_IF_MODE) ? 0 : 1) |
+		     FIELD_PREP(ADMV1014_BB_AMP_PD_MSK,
+				(st->input_mode == ADMV1014_IF_MODE) ? 1 : 0) |
 		     FIELD_PREP(ADMV1014_DET_EN_MSK, st->det_en);
 
 	return __admv1014_spi_update_bits(st, ADMV1014_REG_ENABLE, enable_reg_msk, enable_reg);
diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c
index 4f19dc7ffe57..5908a96ca8af 100644
--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -875,6 +875,7 @@ static int mpu3050_power_up(struct mpu3050 *mpu3050)
 	ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM,
 				 MPU3050_PWR_MGM_SLEEP, 0);
 	if (ret) {
+		regulator_bulk_disable(ARRAY_SIZE(mpu3050->regs), mpu3050->regs);
 		dev_err(mpu3050->dev, "error setting power mode\n");
 		return ret;
 	}
diff --git a/drivers/iio/humidity/hts221_buffer.c b/drivers/iio/humidity/hts221_buffer.c
index f29692b9d2db..66b32413cf5e 100644
--- a/drivers/iio/humidity/hts221_buffer.c
+++ b/drivers/iio/humidity/hts221_buffer.c
@@ -135,9 +135,12 @@ int hts221_allocate_trigger(struct iio_dev *iio_dev)
 
 	iio_trigger_set_drvdata(hw->trig, iio_dev);
 	hw->trig->ops = &hts221_trigger_ops;
+
+	err = devm_iio_trigger_register(hw->dev, hw->trig);
+
 	iio_dev->trig = iio_trigger_get(hw->trig);
 
-	return devm_iio_trigger_register(hw->dev, hw->trig);
+	return err;
 }
 
 static int hts221_buffer_preenable(struct iio_dev *iio_dev)
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600.h b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
index c0f5059b13b3..995a9dc06521 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600.h
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
@@ -17,6 +17,7 @@
 #include "inv_icm42600_buffer.h"
 
 enum inv_icm42600_chip {
+	INV_CHIP_INVALID,
 	INV_CHIP_ICM42600,
 	INV_CHIP_ICM42602,
 	INV_CHIP_ICM42605,
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index 86858da9cc38..ca85fccc9839 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -565,7 +565,7 @@ int inv_icm42600_core_probe(struct regmap *regmap, int chip, int irq,
 	bool open_drain;
 	int ret;
 
-	if (chip < 0 || chip >= INV_CHIP_NB) {
+	if (chip <= INV_CHIP_INVALID || chip >= INV_CHIP_NB) {
 		dev_err(dev, "invalid chip = %d\n", chip);
 		return -ENODEV;
 	}
diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
index 9ff7b0e56cf6..b2bc637150bf 100644
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -639,7 +639,7 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx)
 	dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data);
 
 	/* Sanity check, is this all zeroes? */
-	if (memchr_inv(data, 0x00, 13)) {
+	if (memchr_inv(data, 0x00, 13) == NULL) {
 		if (!(data[13] & BIT(7)))
 			dev_warn(yas5xx->dev, "calibration is blank!\n");
 	}
diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c
index 70c37f664f6d..63fbcaa4cac8 100644
--- a/drivers/iio/proximity/sx9324.c
+++ b/drivers/iio/proximity/sx9324.c
@@ -885,6 +885,9 @@ sx9324_get_default_reg(struct device *dev, int idx,
 			break;
 		ret = device_property_read_u32_array(dev, prop, pin_defs,
 						     ARRAY_SIZE(pin_defs));
+		if (ret)
+			break;
+
 		for (pin = 0; pin < SX9324_NUM_PINS; pin++)
 			raw |= (pin_defs[pin] << (2 * pin)) &
 			       SX9324_REG_AFE_PH0_PIN_MASK(pin);
diff --git a/drivers/iio/test/Kconfig b/drivers/iio/test/Kconfig
index 56ca0ad7e77a..4c66c3f18c34 100644
--- a/drivers/iio/test/Kconfig
+++ b/drivers/iio/test/Kconfig
@@ -6,7 +6,7 @@
 # Keep in alphabetical order
 config IIO_RESCALE_KUNIT_TEST
 	bool "Test IIO rescale conversion functions"
-	depends on KUNIT=y && !IIO_RESCALE
+	depends on KUNIT=y && IIO_RESCALE=y
 	default KUNIT_ALL_TESTS
 	help
 	  If you want to run tests on the iio-rescale code say Y here.
diff --git a/drivers/iio/test/Makefile b/drivers/iio/test/Makefile
index f15ae0a6394f..880360f8d02c 100644
--- a/drivers/iio/test/Makefile
+++ b/drivers/iio/test/Makefile
@@ -4,6 +4,6 @@
 #
 
 # Keep in alphabetical order
-obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o ../afe/iio-rescale.o
+obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o
 obj-$(CONFIG_IIO_TEST_FORMAT) += iio-test-format.o
 CFLAGS_iio-test-format.o += $(DISABLE_STRUCTLEAK_PLUGIN)
diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c
index f1a8704e6cc1..d6c5e9644738 100644
--- a/drivers/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/iio/trigger/iio-trig-sysfs.c
@@ -190,6 +190,7 @@ static int iio_sysfs_trigger_remove(int id)
 	}
 
 	iio_trigger_unregister(t->trig);
+	irq_work_sync(&t->work);
 	iio_trigger_free(t->trig);
 
 	list_del(&t->l);