diff options
| author | Anssi Hannula <anssi.hannula@bitwise.fi> | 2022-10-10 20:52:27 +0200 |
|---|---|---|
| committer | Marc Kleine-Budde <mkl@pengutronix.de> | 2022-10-27 09:00:39 +0200 |
| commit | 2871edb32f4622c3a25ce4b3977bad9050b91974 (patch) | |
| tree | 8f51d60ca1407fb026e87c447fa2a488c6fe682a /drivers | |
| parent | e2badb4bd33abe13ddc35975bd7f7f8693955a4b (diff) | |
| download | linux-2871edb32f4622c3a25ce4b3977bad9050b91974.tar.bz2 | |
can: kvaser_usb: Fix possible completions during init_completion
kvaser_usb uses completions to signal when a response event is received
for outgoing commands.
However, it uses init_completion() to reinitialize the start_comp and
stop_comp completions before sending the start/stop commands.
In case the device sends the corresponding response just before the
actual command is sent, complete() may be called concurrently with
init_completion() which is not safe.
This might be triggerable even with a properly functioning device by
stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which
also causes the driver to send CMD_STOP_CHIP when restart-ms is off),
but that was not tested.
Fix the issue by using reinit_completion() instead.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 4 | ||||
| -rw-r--r-- | drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 4 |
2 files changed, 4 insertions, 4 deletions
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c index 7b52fda73d82..66f672ea631b 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c @@ -1875,7 +1875,7 @@ static int kvaser_usb_hydra_start_chip(struct kvaser_usb_net_priv *priv) { int err; - init_completion(&priv->start_comp); + reinit_completion(&priv->start_comp); err = kvaser_usb_hydra_send_simple_cmd(priv->dev, CMD_START_CHIP_REQ, priv->channel); @@ -1893,7 +1893,7 @@ static int kvaser_usb_hydra_stop_chip(struct kvaser_usb_net_priv *priv) { int err; - init_completion(&priv->stop_comp); + reinit_completion(&priv->stop_comp); /* Make sure we do not report invalid BUS_OFF from CMD_CHIP_STATE_EVENT * see comment in kvaser_usb_hydra_update_state() diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index 50f2ac8319ff..19958037720f 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -1320,7 +1320,7 @@ static int kvaser_usb_leaf_start_chip(struct kvaser_usb_net_priv *priv) { int err; - init_completion(&priv->start_comp); + reinit_completion(&priv->start_comp); err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_START_CHIP, priv->channel); @@ -1338,7 +1338,7 @@ static int kvaser_usb_leaf_stop_chip(struct kvaser_usb_net_priv *priv) { int err; - init_completion(&priv->stop_comp); + reinit_completion(&priv->stop_comp); err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_STOP_CHIP, priv->channel); |