omapfb: copy omapdss & displays for omapfb

This patch makes a copy of the omapdss driver and the omap panel &
encoder drivers for omapfb. The purpose is to separate omapdrm and
omapfb drivers from each other.

Note that this patch only does a direct copy of the files without any
other modifications. The files are not yet used.

The original files are in:

drivers/video/fbdev/omap2/dss/
drivers/video/fbdev/omap2/displays-new/

Here's a more detailed explanation about this and the following patches,
from the introduction mail of the patch series:

A short background on the current status. We have the following
entities:

* omapdss, located in drivers/video/fbdev/omap2/dss/. This is a driver for the
  display subsystem IPs used on OMAP (and related) SoCs. It offers only a
  kernel internal API, and does not implement anything for fbdev or drm.

* omapdss panels and encoders, located in
  drivers/video/fbdev/omap2/displays-new/. These are panel and external encoder
  drivers, which use APIs offered by omapdss driver. These also don't implement
  anything for fbdev or drm.

* omapdrm, located in drivers/gpu/drm/omapdrm/. This is a drm driver, which
  uses omapdss and the panel/encoder drivers to operate the hardware.

* omapfb, located in drivers/video/fbdev/omap2/omapfb/. This is an fbdev
  driver, which uses omapdss and the panel/encoder drivers to operate the
  hardware.

* omap_vout, located in drivers/media/platform/omap/. This is a v4l2 driver,
  which uses omapdss and omapfb to implement a v4l2 API for the video overlays.

So, on the top level, we have either omapdrm, or omapfb+omap_vout. Both of
those use the same low level drivers. Without going to the historical details
why the architecture is like that, I think it's finally time to change that.

The situation with omapfb+omap_vout is that it still works, but no new features
have been added for a long time, and I want to keep it working as it's still
being used.  At some point in the future I'd like to remove omapfb and
omap_vout altogether.

Omapdrm, on the other hand, is being actively developed. Sharing the low level
parts with omapfb makes that development more difficult than it should be. It
also "hides" half of the development, as everything happening in the low level
parts resides under fbdev directory, not in the drm directory.

I've been wanting to clean this up for a long time, but I haven't figured out a
very good way to do it. I still haven't, but here's the best way I have come up
with.

This series makes a full copy of the low level parts, omapdss and panel/encoder
drivers. Both omapfb+omap_vout and omapdrm will have their own versions. The
copy omapfb+omap_vout get is a new copy, and the copy that omapdrm gets is just
the current files moved. This way git will associate the omapdrm version with
the old files.

The omapfb+omap_vout versions won't be touched unless there are some big issues
there.

The omapdrm versions can be refactored and cleaned up, as the omapfb support
code is no longer needed. We can perhaps also merge omapdss and omapdrm into
the same kernel module.

This series only does the copy, and the absolutely necessary parts. No further
cleanups are done yet.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>

1 files changed, 667 insertions, 0 deletions

diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c b/drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c
new file mode 100644
index 000000000000..0918b3bfe82a
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c
@@ -0,0 +1,667 @@
+/*
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "APPLY"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+#include "dss_features.h"
+#include "dispc-compat.h"
+
+#define DISPC_IRQ_MASK_ERROR            (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \
+					 DISPC_IRQ_OCP_ERR | \
+					 DISPC_IRQ_VID1_FIFO_UNDERFLOW | \
+					 DISPC_IRQ_VID2_FIFO_UNDERFLOW | \
+					 DISPC_IRQ_SYNC_LOST | \
+					 DISPC_IRQ_SYNC_LOST_DIGIT)
+
+#define DISPC_MAX_NR_ISRS		8
+
+struct omap_dispc_isr_data {
+	omap_dispc_isr_t	isr;
+	void			*arg;
+	u32			mask;
+};
+
+struct dispc_irq_stats {
+	unsigned long last_reset;
+	unsigned irq_count;
+	unsigned irqs[32];
+};
+
+static struct {
+	spinlock_t irq_lock;
+	u32 irq_error_mask;
+	struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS];
+	u32 error_irqs;
+	struct work_struct error_work;
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+	spinlock_t irq_stats_lock;
+	struct dispc_irq_stats irq_stats;
+#endif
+} dispc_compat;
+
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+static void dispc_dump_irqs(struct seq_file *s)
+{
+	unsigned long flags;
+	struct dispc_irq_stats stats;
+
+	spin_lock_irqsave(&dispc_compat.irq_stats_lock, flags);
+
+	stats = dispc_compat.irq_stats;
+	memset(&dispc_compat.irq_stats, 0, sizeof(dispc_compat.irq_stats));
+	dispc_compat.irq_stats.last_reset = jiffies;
+
+	spin_unlock_irqrestore(&dispc_compat.irq_stats_lock, flags);
+
+	seq_printf(s, "period %u ms\n",
+			jiffies_to_msecs(jiffies - stats.last_reset));
+
+	seq_printf(s, "irqs %d\n", stats.irq_count);
+#define PIS(x) \
+	seq_printf(s, "%-20s %10d\n", #x, stats.irqs[ffs(DISPC_IRQ_##x)-1]);
+
+	PIS(FRAMEDONE);
+	PIS(VSYNC);
+	PIS(EVSYNC_EVEN);
+	PIS(EVSYNC_ODD);
+	PIS(ACBIAS_COUNT_STAT);
+	PIS(PROG_LINE_NUM);
+	PIS(GFX_FIFO_UNDERFLOW);
+	PIS(GFX_END_WIN);
+	PIS(PAL_GAMMA_MASK);
+	PIS(OCP_ERR);
+	PIS(VID1_FIFO_UNDERFLOW);
+	PIS(VID1_END_WIN);
+	PIS(VID2_FIFO_UNDERFLOW);
+	PIS(VID2_END_WIN);
+	if (dss_feat_get_num_ovls() > 3) {
+		PIS(VID3_FIFO_UNDERFLOW);
+		PIS(VID3_END_WIN);
+	}
+	PIS(SYNC_LOST);
+	PIS(SYNC_LOST_DIGIT);
+	PIS(WAKEUP);
+	if (dss_has_feature(FEAT_MGR_LCD2)) {
+		PIS(FRAMEDONE2);
+		PIS(VSYNC2);
+		PIS(ACBIAS_COUNT_STAT2);
+		PIS(SYNC_LOST2);
+	}
+	if (dss_has_feature(FEAT_MGR_LCD3)) {
+		PIS(FRAMEDONE3);
+		PIS(VSYNC3);
+		PIS(ACBIAS_COUNT_STAT3);
+		PIS(SYNC_LOST3);
+	}
+#undef PIS
+}
+#endif
+
+/* dispc.irq_lock has to be locked by the caller */
+static void _omap_dispc_set_irqs(void)
+{
+	u32 mask;
+	int i;
+	struct omap_dispc_isr_data *isr_data;
+
+	mask = dispc_compat.irq_error_mask;
+
+	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
+		isr_data = &dispc_compat.registered_isr[i];
+
+		if (isr_data->isr == NULL)
+			continue;
+
+		mask |= isr_data->mask;
+	}
+
+	dispc_write_irqenable(mask);
+}
+
+int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask)
+{
+	int i;
+	int ret;
+	unsigned long flags;
+	struct omap_dispc_isr_data *isr_data;
+
+	if (isr == NULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dispc_compat.irq_lock, flags);
+
+	/* check for duplicate entry */
+	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
+		isr_data = &dispc_compat.registered_isr[i];
+		if (isr_data->isr == isr && isr_data->arg == arg &&
+				isr_data->mask == mask) {
+			ret = -EINVAL;
+			goto err;
+		}
+	}
+
+	isr_data = NULL;
+	ret = -EBUSY;
+
+	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
+		isr_data = &dispc_compat.registered_isr[i];
+
+		if (isr_data->isr != NULL)
+			continue;
+
+		isr_data->isr = isr;
+		isr_data->arg = arg;
+		isr_data->mask = mask;
+		ret = 0;
+
+		break;
+	}
+
+	if (ret)
+		goto err;
+
+	_omap_dispc_set_irqs();
+
+	spin_unlock_irqrestore(&dispc_compat.irq_lock, flags);
+
+	return 0;
+err:
+	spin_unlock_irqrestore(&dispc_compat.irq_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(omap_dispc_register_isr);
+
+int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask)
+{
+	int i;
+	unsigned long flags;
+	int ret = -EINVAL;
+	struct omap_dispc_isr_data *isr_data;
+
+	spin_lock_irqsave(&dispc_compat.irq_lock, flags);
+
+	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
+		isr_data = &dispc_compat.registered_isr[i];
+		if (isr_data->isr != isr || isr_data->arg != arg ||
+				isr_data->mask != mask)
+			continue;
+
+		/* found the correct isr */
+
+		isr_data->isr = NULL;
+		isr_data->arg = NULL;
+		isr_data->mask = 0;
+
+		ret = 0;
+		break;
+	}
+
+	if (ret == 0)
+		_omap_dispc_set_irqs();
+
+	spin_unlock_irqrestore(&dispc_compat.irq_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(omap_dispc_unregister_isr);
+
+static void print_irq_status(u32 status)
+{
+	if ((status & dispc_compat.irq_error_mask) == 0)
+		return;
+
+#define PIS(x) (status & DISPC_IRQ_##x) ? (#x " ") : ""
+
+	pr_debug("DISPC IRQ: 0x%x: %s%s%s%s%s%s%s%s%s\n",
+		status,
+		PIS(OCP_ERR),
+		PIS(GFX_FIFO_UNDERFLOW),
+		PIS(VID1_FIFO_UNDERFLOW),
+		PIS(VID2_FIFO_UNDERFLOW),
+		dss_feat_get_num_ovls() > 3 ? PIS(VID3_FIFO_UNDERFLOW) : "",
+		PIS(SYNC_LOST),
+		PIS(SYNC_LOST_DIGIT),
+		dss_has_feature(FEAT_MGR_LCD2) ? PIS(SYNC_LOST2) : "",
+		dss_has_feature(FEAT_MGR_LCD3) ? PIS(SYNC_LOST3) : "");
+#undef PIS
+}
+
+/* Called from dss.c. Note that we don't touch clocks here,
+ * but we presume they are on because we got an IRQ. However,
+ * an irq handler may turn the clocks off, so we may not have
+ * clock later in the function. */
+static irqreturn_t omap_dispc_irq_handler(int irq, void *arg)
+{
+	int i;
+	u32 irqstatus, irqenable;
+	u32 handledirqs = 0;
+	u32 unhandled_errors;
+	struct omap_dispc_isr_data *isr_data;
+	struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS];
+
+	spin_lock(&dispc_compat.irq_lock);
+
+	irqstatus = dispc_read_irqstatus();
+	irqenable = dispc_read_irqenable();
+
+	/* IRQ is not for us */
+	if (!(irqstatus & irqenable)) {
+		spin_unlock(&dispc_compat.irq_lock);
+		return IRQ_NONE;
+	}
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+	spin_lock(&dispc_compat.irq_stats_lock);
+	dispc_compat.irq_stats.irq_count++;
+	dss_collect_irq_stats(irqstatus, dispc_compat.irq_stats.irqs);
+	spin_unlock(&dispc_compat.irq_stats_lock);
+#endif
+
+	print_irq_status(irqstatus);
+
+	/* Ack the interrupt. Do it here before clocks are possibly turned
+	 * off */
+	dispc_clear_irqstatus(irqstatus);
+	/* flush posted write */
+	dispc_read_irqstatus();
+
+	/* make a copy and unlock, so that isrs can unregister
+	 * themselves */
+	memcpy(registered_isr, dispc_compat.registered_isr,
+			sizeof(registered_isr));
+
+	spin_unlock(&dispc_compat.irq_lock);
+
+	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
+		isr_data = &registered_isr[i];
+
+		if (!isr_data->isr)
+			continue;
+
+		if (isr_data->mask & irqstatus) {
+			isr_data->isr(isr_data->arg, irqstatus);
+			handledirqs |= isr_data->mask;
+		}
+	}
+
+	spin_lock(&dispc_compat.irq_lock);
+
+	unhandled_errors = irqstatus & ~handledirqs & dispc_compat.irq_error_mask;
+
+	if (unhandled_errors) {
+		dispc_compat.error_irqs |= unhandled_errors;
+
+		dispc_compat.irq_error_mask &= ~unhandled_errors;
+		_omap_dispc_set_irqs();
+
+		schedule_work(&dispc_compat.error_work);
+	}
+
+	spin_unlock(&dispc_compat.irq_lock);
+
+	return IRQ_HANDLED;
+}
+
+static void dispc_error_worker(struct work_struct *work)
+{
+	int i;
+	u32 errors;
+	unsigned long flags;
+	static const unsigned fifo_underflow_bits[] = {
+		DISPC_IRQ_GFX_FIFO_UNDERFLOW,
+		DISPC_IRQ_VID1_FIFO_UNDERFLOW,
+		DISPC_IRQ_VID2_FIFO_UNDERFLOW,
+		DISPC_IRQ_VID3_FIFO_UNDERFLOW,
+	};
+
+	spin_lock_irqsave(&dispc_compat.irq_lock, flags);
+	errors = dispc_compat.error_irqs;
+	dispc_compat.error_irqs = 0;
+	spin_unlock_irqrestore(&dispc_compat.irq_lock, flags);
+
+	dispc_runtime_get();
+
+	for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
+		struct omap_overlay *ovl;
+		unsigned bit;
+
+		ovl = omap_dss_get_overlay(i);
+		bit = fifo_underflow_bits[i];
+
+		if (bit & errors) {
+			DSSERR("FIFO UNDERFLOW on %s, disabling the overlay\n",
+					ovl->name);
+			ovl->disable(ovl);
+			msleep(50);
+		}
+	}
+
+	for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+		struct omap_overlay_manager *mgr;
+		unsigned bit;
+
+		mgr = omap_dss_get_overlay_manager(i);
+		bit = dispc_mgr_get_sync_lost_irq(i);
+
+		if (bit & errors) {
+			int j;
+
+			DSSERR("SYNC_LOST on channel %s, restarting the output "
+					"with video overlays disabled\n",
+					mgr->name);
+
+			dss_mgr_disable(mgr);
+
+			for (j = 0; j < omap_dss_get_num_overlays(); ++j) {
+				struct omap_overlay *ovl;
+				ovl = omap_dss_get_overlay(j);
+
+				if (ovl->id != OMAP_DSS_GFX &&
+						ovl->manager == mgr)
+					ovl->disable(ovl);
+			}
+
+			dss_mgr_enable(mgr);
+		}
+	}
+
+	if (errors & DISPC_IRQ_OCP_ERR) {
+		DSSERR("OCP_ERR\n");
+		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+			struct omap_overlay_manager *mgr;
+
+			mgr = omap_dss_get_overlay_manager(i);
+			dss_mgr_disable(mgr);
+		}
+	}
+
+	spin_lock_irqsave(&dispc_compat.irq_lock, flags);
+	dispc_compat.irq_error_mask |= errors;
+	_omap_dispc_set_irqs();
+	spin_unlock_irqrestore(&dispc_compat.irq_lock, flags);
+
+	dispc_runtime_put();
+}
+
+int dss_dispc_initialize_irq(void)
+{
+	int r;
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+	spin_lock_init(&dispc_compat.irq_stats_lock);
+	dispc_compat.irq_stats.last_reset = jiffies;
+	dss_debugfs_create_file("dispc_irq", dispc_dump_irqs);
+#endif
+
+	spin_lock_init(&dispc_compat.irq_lock);
+
+	memset(dispc_compat.registered_isr, 0,
+			sizeof(dispc_compat.registered_isr));
+
+	dispc_compat.irq_error_mask = DISPC_IRQ_MASK_ERROR;
+	if (dss_has_feature(FEAT_MGR_LCD2))
+		dispc_compat.irq_error_mask |= DISPC_IRQ_SYNC_LOST2;
+	if (dss_has_feature(FEAT_MGR_LCD3))
+		dispc_compat.irq_error_mask |= DISPC_IRQ_SYNC_LOST3;
+	if (dss_feat_get_num_ovls() > 3)
+		dispc_compat.irq_error_mask |= DISPC_IRQ_VID3_FIFO_UNDERFLOW;
+
+	/*
+	 * there's SYNC_LOST_DIGIT waiting after enabling the DSS,
+	 * so clear it
+	 */
+	dispc_clear_irqstatus(dispc_read_irqstatus());
+
+	INIT_WORK(&dispc_compat.error_work, dispc_error_worker);
+
+	_omap_dispc_set_irqs();
+
+	r = dispc_request_irq(omap_dispc_irq_handler, &dispc_compat);
+	if (r) {
+		DSSERR("dispc_request_irq failed\n");
+		return r;
+	}
+
+	return 0;
+}
+
+void dss_dispc_uninitialize_irq(void)
+{
+	dispc_free_irq(&dispc_compat);
+}
+
+static void dispc_mgr_disable_isr(void *data, u32 mask)
+{
+	struct completion *compl = data;
+	complete(compl);
+}
+
+static void dispc_mgr_enable_lcd_out(enum omap_channel channel)
+{
+	dispc_mgr_enable(channel, true);
+}
+
+static void dispc_mgr_disable_lcd_out(enum omap_channel channel)
+{
+	DECLARE_COMPLETION_ONSTACK(framedone_compl);
+	int r;
+	u32 irq;
+
+	if (!dispc_mgr_is_enabled(channel))
+		return;
+
+	/*
+	 * When we disable LCD output, we need to wait for FRAMEDONE to know
+	 * that DISPC has finished with the LCD output.
+	 */
+
+	irq = dispc_mgr_get_framedone_irq(channel);
+
+	r = omap_dispc_register_isr(dispc_mgr_disable_isr, &framedone_compl,
+			irq);
+	if (r)
+		DSSERR("failed to register FRAMEDONE isr\n");
+
+	dispc_mgr_enable(channel, false);
+
+	/* if we couldn't register for framedone, just sleep and exit */
+	if (r) {
+		msleep(100);
+		return;
+	}
+
+	if (!wait_for_completion_timeout(&framedone_compl,
+				msecs_to_jiffies(100)))
+		DSSERR("timeout waiting for FRAME DONE\n");
+
+	r = omap_dispc_unregister_isr(dispc_mgr_disable_isr, &framedone_compl,
+			irq);
+	if (r)
+		DSSERR("failed to unregister FRAMEDONE isr\n");
+}
+
+static void dispc_digit_out_enable_isr(void *data, u32 mask)
+{
+	struct completion *compl = data;
+
+	/* ignore any sync lost interrupts */
+	if (mask & (DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD))
+		complete(compl);
+}
+
+static void dispc_mgr_enable_digit_out(void)
+{
+	DECLARE_COMPLETION_ONSTACK(vsync_compl);
+	int r;
+	u32 irq_mask;
+
+	if (dispc_mgr_is_enabled(OMAP_DSS_CHANNEL_DIGIT))
+		return;
+
+	/*
+	 * Digit output produces some sync lost interrupts during the first
+	 * frame when enabling. Those need to be ignored, so we register for the
+	 * sync lost irq to prevent the error handler from triggering.
+	 */
+
+	irq_mask = dispc_mgr_get_vsync_irq(OMAP_DSS_CHANNEL_DIGIT) |
+		dispc_mgr_get_sync_lost_irq(OMAP_DSS_CHANNEL_DIGIT);
+
+	r = omap_dispc_register_isr(dispc_digit_out_enable_isr, &vsync_compl,
+			irq_mask);
+	if (r) {
+		DSSERR("failed to register %x isr\n", irq_mask);
+		return;
+	}
+
+	dispc_mgr_enable(OMAP_DSS_CHANNEL_DIGIT, true);
+
+	/* wait for the first evsync */
+	if (!wait_for_completion_timeout(&vsync_compl, msecs_to_jiffies(100)))
+		DSSERR("timeout waiting for digit out to start\n");
+
+	r = omap_dispc_unregister_isr(dispc_digit_out_enable_isr, &vsync_compl,
+			irq_mask);
+	if (r)
+		DSSERR("failed to unregister %x isr\n", irq_mask);
+}
+
+static void dispc_mgr_disable_digit_out(void)
+{
+	DECLARE_COMPLETION_ONSTACK(framedone_compl);
+	int r, i;
+	u32 irq_mask;
+	int num_irqs;
+
+	if (!dispc_mgr_is_enabled(OMAP_DSS_CHANNEL_DIGIT))
+		return;
+
+	/*
+	 * When we disable the digit output, we need to wait for FRAMEDONE to
+	 * know that DISPC has finished with the output.
+	 */
+
+	irq_mask = dispc_mgr_get_framedone_irq(OMAP_DSS_CHANNEL_DIGIT);
+	num_irqs = 1;
+
+	if (!irq_mask) {
+		/*
+		 * omap 2/3 don't have framedone irq for TV, so we need to use
+		 * vsyncs for this.
+		 */
+
+		irq_mask = dispc_mgr_get_vsync_irq(OMAP_DSS_CHANNEL_DIGIT);
+		/*
+		 * We need to wait for both even and odd vsyncs. Note that this
+		 * is not totally reliable, as we could get a vsync interrupt
+		 * before we disable the output, which leads to timeout in the
+		 * wait_for_completion.
+		 */
+		num_irqs = 2;
+	}
+
+	r = omap_dispc_register_isr(dispc_mgr_disable_isr, &framedone_compl,
+			irq_mask);
+	if (r)
+		DSSERR("failed to register %x isr\n", irq_mask);
+
+	dispc_mgr_enable(OMAP_DSS_CHANNEL_DIGIT, false);
+
+	/* if we couldn't register the irq, just sleep and exit */
+	if (r) {
+		msleep(100);
+		return;
+	}
+
+	for (i = 0; i < num_irqs; ++i) {
+		if (!wait_for_completion_timeout(&framedone_compl,
+					msecs_to_jiffies(100)))
+			DSSERR("timeout waiting for digit out to stop\n");
+	}
+
+	r = omap_dispc_unregister_isr(dispc_mgr_disable_isr, &framedone_compl,
+			irq_mask);
+	if (r)
+		DSSERR("failed to unregister %x isr\n", irq_mask);
+}
+
+void dispc_mgr_enable_sync(enum omap_channel channel)
+{
+	if (dss_mgr_is_lcd(channel))
+		dispc_mgr_enable_lcd_out(channel);
+	else if (channel == OMAP_DSS_CHANNEL_DIGIT)
+		dispc_mgr_enable_digit_out();
+	else
+		WARN_ON(1);
+}
+
+void dispc_mgr_disable_sync(enum omap_channel channel)
+{
+	if (dss_mgr_is_lcd(channel))
+		dispc_mgr_disable_lcd_out(channel);
+	else if (channel == OMAP_DSS_CHANNEL_DIGIT)
+		dispc_mgr_disable_digit_out();
+	else
+		WARN_ON(1);
+}
+
+static inline void dispc_irq_wait_handler(void *data, u32 mask)
+{
+	complete((struct completion *)data);
+}
+
+int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
+		unsigned long timeout)
+{
+
+	int r;
+	DECLARE_COMPLETION_ONSTACK(completion);
+
+	r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion,
+			irqmask);
+
+	if (r)
+		return r;
+
+	timeout = wait_for_completion_interruptible_timeout(&completion,
+			timeout);
+
+	omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask);
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	if (timeout == -ERESTARTSYS)
+		return -ERESTARTSYS;
+
+	return 0;
+}