vfio/pci: Move the unused device into low power state with runtime PM

Currently, there is very limited power management support
available in the upstream vfio_pci_core based drivers. If there
are no users of the device, then the PCI device will be moved into
D3hot state by writing directly into PCI PM registers. This D3hot
state help in saving power but we can achieve zero power consumption
if we go into the D3cold state. The D3cold state cannot be possible
with native PCI PM. It requires interaction with platform firmware
which is system-specific. To go into low power states (including D3cold),
the runtime PM framework can be used which internally interacts with PCI
and platform firmware and puts the device into the lowest possible
D-States.

This patch registers vfio_pci_core based drivers with the
runtime PM framework.

1. The PCI core framework takes care of most of the runtime PM
   related things. For enabling the runtime PM, the PCI driver needs to
   decrement the usage count and needs to provide 'struct dev_pm_ops'
   at least. The runtime suspend/resume callbacks are optional and needed
   only if we need to do any extra handling. Now there are multiple
   vfio_pci_core based drivers. Instead of assigning the
   'struct dev_pm_ops' in individual parent driver, the vfio_pci_core
   itself assigns the 'struct dev_pm_ops'. There are other drivers where
   the 'struct dev_pm_ops' is being assigned inside core layer
   (For example, wlcore_probe() and some sound based driver, etc.).

2. This patch provides the stub implementation of 'struct dev_pm_ops'.
   The subsequent patch will provide the runtime suspend/resume
   callbacks. All the config state saving, and PCI power management
   related things will be done by PCI core framework itself inside its
   runtime suspend/resume callbacks (pci_pm_runtime_suspend() and
   pci_pm_runtime_resume()).

3. Inside pci_reset_bus(), all the devices in dev_set needs to be
   runtime resumed. vfio_pci_dev_set_pm_runtime_get() will take
   care of the runtime resume and its error handling.

4. Inside vfio_pci_core_disable(), the device usage count always needs
   to be decremented which was incremented in vfio_pci_core_enable().

5. Since the runtime PM framework will provide the same functionality,
   so directly writing into PCI PM config register can be replaced with
   the use of runtime PM routines. Also, the use of runtime PM can help
   us in more power saving.

   In the systems which do not support D3cold,

   With the existing implementation:

   // PCI device
   # cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
   D3hot
   // upstream bridge
   # cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
   D0

   With runtime PM:

   // PCI device
   # cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
   D3hot
   // upstream bridge
   # cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
   D3hot

   So, with runtime PM, the upstream bridge or root port will also go
   into lower power state which is not possible with existing
   implementation.

   In the systems which support D3cold,

   // PCI device
   # cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
   D3hot
   // upstream bridge
   # cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
   D0

   With runtime PM:

   // PCI device
   # cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
   D3cold
   // upstream bridge
   # cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
   D3cold

   So, with runtime PM, both the PCI device and upstream bridge will
   go into D3cold state.

6. If 'disable_idle_d3' module parameter is set, then also the runtime
   PM will be enabled, but in this case, the usage count should not be
   decremented.

7. vfio_pci_dev_set_try_reset() return value is unused now, so this
   function return type can be changed to void.

8. Use the runtime PM API's in vfio_pci_core_sriov_configure().
   The device can be in low power state either with runtime
   power management (when there is no user) or PCI_PM_CTRL register
   write by the user. In both the cases, the PF should be moved to
   D0 state. For preventing any runtime usage mismatch, pci_num_vf()
   has been called explicitly during disable.

Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220518111612.16985-5-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

0 files changed, 0 insertions, 0 deletions