summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-10-24 10:33:08 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2020-10-24 10:33:08 -0700
commite731f3146ff3bba5424b40140e1a7e6f92e94964 (patch)
treec926040385de8b020763f0d2338e0ccbf42bac45 /drivers/usb
parent1f70935f637dfba226bf77182c2629fde61ed06e (diff)
parentaccdab6d9e8f715068d91ee0ca0424a6999f0d19 (diff)
downloadlinux-e731f3146ff3bba5424b40140e1a7e6f92e94964.tar.bz2
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/gadget/udc/s3c-hsudc.c55
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc.c31
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc.h1
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc_regs.h146
4 files changed, 162 insertions, 71 deletions
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index aaca1b0a2f59..7bd5182ce3ef 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -30,8 +30,6 @@
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
-#include <mach/regs-s3c2443-clock.h>
-
#define S3C_HSUDC_REG(x) (x)
/* Non-Indexed Registers */
@@ -186,53 +184,6 @@ static inline void __orr32(void __iomem *ptr, u32 val)
writel(readl(ptr) | val, ptr);
}
-static void s3c_hsudc_init_phy(void)
-{
- u32 cfg;
-
- cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
- writel(cfg, S3C2443_PWRCFG);
-
- cfg = readl(S3C2443_URSTCON);
- cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
- writel(cfg, S3C2443_URSTCON);
- mdelay(1);
-
- cfg = readl(S3C2443_URSTCON);
- cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
- writel(cfg, S3C2443_URSTCON);
-
- cfg = readl(S3C2443_PHYCTRL);
- cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
- cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
- writel(cfg, S3C2443_PHYCTRL);
-
- cfg = readl(S3C2443_PHYPWR);
- cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
- S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
- S3C2443_PHYPWR_ANALOG_PD);
- cfg |= S3C2443_PHYPWR_COMMON_ON;
- writel(cfg, S3C2443_PHYPWR);
-
- cfg = readl(S3C2443_UCLKCON);
- cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
- S3C2443_UCLKCON_TCLKEN);
- writel(cfg, S3C2443_UCLKCON);
-}
-
-static void s3c_hsudc_uninit_phy(void)
-{
- u32 cfg;
-
- cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
- writel(cfg, S3C2443_PWRCFG);
-
- writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
-
- cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
- writel(cfg, S3C2443_UCLKCON);
-}
-
/**
* s3c_hsudc_complete_request - Complete a transfer request.
* @hsep: Endpoint to which the request belongs.
@@ -1188,7 +1139,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,
pm_runtime_get_sync(hsudc->dev);
- s3c_hsudc_init_phy();
+ if (hsudc->pd->phy_init)
+ hsudc->pd->phy_init();
if (hsudc->pd->gpio_init)
hsudc->pd->gpio_init();
@@ -1210,7 +1162,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget)
spin_lock_irqsave(&hsudc->lock, flags);
hsudc->gadget.speed = USB_SPEED_UNKNOWN;
- s3c_hsudc_uninit_phy();
+ if (hsudc->pd->phy_uninit)
+ hsudc->pd->phy_uninit();
pm_runtime_put(hsudc->dev);
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index e875a0b967c0..f1ea51476add 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -36,15 +36,11 @@
#include <asm/byteorder.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-udc.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
-
#include "s3c2410_udc.h"
+#include "s3c2410_udc_regs.h"
#define DRIVER_DESC "S3C2410 USB Device Controller Gadget"
#define DRIVER_AUTHOR "Herbert Pƶtzl <herbert@13thfloor.at>, " \
@@ -57,6 +53,7 @@ static struct s3c2410_udc *the_controller;
static struct clk *udc_clock;
static struct clk *usb_bus_clock;
static void __iomem *base_addr;
+static int irq_usbd;
static u64 rsrc_start;
static u64 rsrc_len;
static struct dentry *s3c2410_udc_debugfs_root;
@@ -835,8 +832,6 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
}
}
-#include <mach/regs-irq.h>
-
/*
* s3c2410_udc_irq - interrupt handler
*/
@@ -977,7 +972,7 @@ static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev)
}
}
- dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD);
+ dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", irq_usbd);
/* Restore old index */
udc_write(idx, S3C2410_UDC_INDEX_REG);
@@ -1777,13 +1772,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
spin_lock_init(&udc->lock);
udc_info = dev_get_platdata(&pdev->dev);
- rsrc_start = S3C2410_PA_USBDEV;
- rsrc_len = S3C24XX_SZ_USBDEV;
-
- if (!request_mem_region(rsrc_start, rsrc_len, gadget_name))
- return -EBUSY;
-
- base_addr = ioremap(rsrc_start, rsrc_len);
+ base_addr = devm_platform_ioremap_resource(pdev, 0);
if (!base_addr) {
retval = -ENOMEM;
goto err_mem;
@@ -1795,17 +1784,19 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
s3c2410_udc_disable(udc);
s3c2410_udc_reinit(udc);
+ irq_usbd = platform_get_irq(pdev, 0);
+
/* irq setup after old hardware state is cleaned up */
- retval = request_irq(IRQ_USBD, s3c2410_udc_irq,
+ retval = request_irq(irq_usbd, s3c2410_udc_irq,
0, gadget_name, udc);
if (retval != 0) {
- dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval);
+ dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval);
retval = -EBUSY;
goto err_map;
}
- dev_dbg(dev, "got irq %i\n", IRQ_USBD);
+ dev_dbg(dev, "got irq %i\n", irq_usbd);
if (udc_info && udc_info->vbus_pin > 0) {
retval = gpio_request(udc_info->vbus_pin, "udc vbus");
@@ -1872,7 +1863,7 @@ err_gpio_claim:
if (udc_info && udc_info->vbus_pin > 0)
gpio_free(udc_info->vbus_pin);
err_int:
- free_irq(IRQ_USBD, udc);
+ free_irq(irq_usbd, udc);
err_map:
iounmap(base_addr);
err_mem:
@@ -1906,7 +1897,7 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
free_irq(irq, udc);
}
- free_irq(IRQ_USBD, udc);
+ free_irq(irq_usbd, udc);
iounmap(base_addr);
release_mem_region(rsrc_start, rsrc_len);
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h
index bdcaa8dd300f..68bdf3e5aac2 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.h
+++ b/drivers/usb/gadget/udc/s3c2410_udc.h
@@ -90,6 +90,7 @@ struct s3c2410_udc {
unsigned req_pending : 1;
u8 vbus;
struct dentry *regs_info;
+ int irq;
};
#define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget))
diff --git a/drivers/usb/gadget/udc/s3c2410_udc_regs.h b/drivers/usb/gadget/udc/s3c2410_udc_regs.h
new file mode 100644
index 000000000000..d8d2eeaca088
--- /dev/null
+++ b/drivers/usb/gadget/udc/s3c2410_udc_regs.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
+ */
+
+#ifndef __ASM_ARCH_REGS_UDC_H
+#define __ASM_ARCH_REGS_UDC_H
+
+#define S3C2410_USBDREG(x) (x)
+
+#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140)
+#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144)
+#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148)
+
+#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158)
+#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c)
+
+#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c)
+
+#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170)
+#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174)
+
+#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0)
+#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4)
+#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8)
+#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc)
+#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0)
+
+#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200)
+#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204)
+#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208)
+#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c)
+#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210)
+#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214)
+
+#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218)
+#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c)
+#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220)
+#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224)
+#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228)
+#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c)
+
+#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240)
+#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244)
+#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248)
+#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c)
+#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250)
+#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254)
+
+#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258)
+#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c)
+#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260)
+#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264)
+#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268)
+#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c)
+
+#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178)
+
+/* indexed registers */
+
+#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180)
+
+#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184)
+
+#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184)
+#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188)
+
+#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190)
+#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194)
+#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198)
+#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c)
+
+#define S3C2410_UDC_FUNCADDR_UPDATE (1 << 7)
+
+#define S3C2410_UDC_PWR_ISOUP (1 << 7) /* R/W */
+#define S3C2410_UDC_PWR_RESET (1 << 3) /* R */
+#define S3C2410_UDC_PWR_RESUME (1 << 2) /* R/W */
+#define S3C2410_UDC_PWR_SUSPEND (1 << 1) /* R */
+#define S3C2410_UDC_PWR_ENSUSPEND (1 << 0) /* R/W */
+
+#define S3C2410_UDC_PWR_DEFAULT (0x00)
+
+#define S3C2410_UDC_INT_EP4 (1 << 4) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP3 (1 << 3) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP2 (1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP1 (1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP0 (1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_USBINT_RESET (1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_RESUME (1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_SUSPEND (1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_INTE_EP4 (1 << 4) /* R/W */
+#define S3C2410_UDC_INTE_EP3 (1 << 3) /* R/W */
+#define S3C2410_UDC_INTE_EP2 (1 << 2) /* R/W */
+#define S3C2410_UDC_INTE_EP1 (1 << 1) /* R/W */
+#define S3C2410_UDC_INTE_EP0 (1 << 0) /* R/W */
+
+#define S3C2410_UDC_USBINTE_RESET (1 << 2) /* R/W */
+#define S3C2410_UDC_USBINTE_SUSPEND (1 << 0) /* R/W */
+
+#define S3C2410_UDC_INDEX_EP0 (0x00)
+#define S3C2410_UDC_INDEX_EP1 (0x01)
+#define S3C2410_UDC_INDEX_EP2 (0x02)
+#define S3C2410_UDC_INDEX_EP3 (0x03)
+#define S3C2410_UDC_INDEX_EP4 (0x04)
+
+#define S3C2410_UDC_ICSR1_CLRDT (1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR1_SENTSTL (1 << 5) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_SENDSTL (1 << 4) /* R/W */
+#define S3C2410_UDC_ICSR1_FFLUSH (1 << 3) /* W (set only) */
+#define S3C2410_UDC_ICSR1_UNDRUN (1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_PKTRDY (1 << 0) /* R/W (set only) */
+
+#define S3C2410_UDC_ICSR2_AUTOSET (1 << 7) /* R/W */
+#define S3C2410_UDC_ICSR2_ISO (1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR2_MODEIN (1 << 5) /* R/W */
+#define S3C2410_UDC_ICSR2_DMAIEN (1 << 4) /* R/W */
+
+#define S3C2410_UDC_OCSR1_CLRDT (1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR1_SENTSTL (1 << 6) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_SENDSTL (1 << 5) /* R/W */
+#define S3C2410_UDC_OCSR1_FFLUSH (1 << 4) /* R/W */
+#define S3C2410_UDC_OCSR1_DERROR (1 << 3) /* R */
+#define S3C2410_UDC_OCSR1_OVRRUN (1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_PKTRDY (1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_OCSR2_AUTOCLR (1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR2_ISO (1 << 6) /* R/W */
+#define S3C2410_UDC_OCSR2_DMAIEN (1 << 5) /* R/W */
+
+#define S3C2410_UDC_EP0_CSR_OPKRDY (1 << 0)
+#define S3C2410_UDC_EP0_CSR_IPKRDY (1 << 1)
+#define S3C2410_UDC_EP0_CSR_SENTSTL (1 << 2)
+#define S3C2410_UDC_EP0_CSR_DE (1 << 3)
+#define S3C2410_UDC_EP0_CSR_SE (1 << 4)
+#define S3C2410_UDC_EP0_CSR_SENDSTL (1 << 5)
+#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1 << 6)
+#define S3C2410_UDC_EP0_CSR_SSE (1 << 7)
+
+#define S3C2410_UDC_MAXP_8 (1 << 0)
+#define S3C2410_UDC_MAXP_16 (1 << 1)
+#define S3C2410_UDC_MAXP_32 (1 << 2)
+#define S3C2410_UDC_MAXP_64 (1 << 3)
+
+#endif