summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2018-12-21 08:36:54 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2018-12-21 08:36:54 +0100
commit1e12a521d6917004f8b95a3b5864b92edc2694c8 (patch)
treef46b3150795c72408d9d4fe931427dfbd1192a3c /drivers/usb
parenteafb27fa5283599ce6c5492ea18cf636a28222bb (diff)
parent8d503f206c336677954160ac62f0c7d9c219cd89 (diff)
downloadlinux-1e12a521d6917004f8b95a3b5864b92edc2694c8.tar.bz2
Merge tag 'usb-serial-4.21-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes: USB-serial updates for 4.21-rc1 Here are the USB-serial updates for 4.21-rc1, including: - support for mos7840 3-port devices - improved ftdi baud-rate divisor calculations - support for a new class of f81534 devices Included are also various clean ups and some new pl2303 device ids. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-4.21-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays USB: serial: mos7840: remove set but not used variables 'number, serial' USB: serial: mos7840: add a product ID for the new product USB: serial: mos7840: clean up register handling USB: serial: ftdi_sio: use rounding when calculating baud rate divisors USB: serial: f81534: fix reading old/new IC config USB: serial: mos7840: remove set but not used variables 'st, data1, iflag' USB: serial: quatech2: remove set but not used variable 'port_priv'
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/serial/f81534.c20
-rw-r--r--drivers/usb/serial/ftdi_sio.c6
-rw-r--r--drivers/usb/serial/mos7840.c71
-rw-r--r--drivers/usb/serial/pl2303.c5
-rw-r--r--drivers/usb/serial/pl2303.h5
-rw-r--r--drivers/usb/serial/quatech2.c3
6 files changed, 55 insertions, 55 deletions
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index 380933db34dd..2b39bda035c7 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -45,14 +45,17 @@
#define F81534_CONFIG1_REG (0x09 + F81534_UART_BASE_ADDRESS)
#define F81534_DEF_CONF_ADDRESS_START 0x3000
-#define F81534_DEF_CONF_SIZE 8
+#define F81534_DEF_CONF_SIZE 12
#define F81534_CUSTOM_ADDRESS_START 0x2f00
#define F81534_CUSTOM_DATA_SIZE 0x10
#define F81534_CUSTOM_NO_CUSTOM_DATA 0xff
#define F81534_CUSTOM_VALID_TOKEN 0xf0
#define F81534_CONF_OFFSET 1
-#define F81534_CONF_GPIO_OFFSET 4
+#define F81534_CONF_INIT_GPIO_OFFSET 4
+#define F81534_CONF_WORK_GPIO_OFFSET 8
+#define F81534_CONF_GPIO_SHUTDOWN 7
+#define F81534_CONF_GPIO_RS232 1
#define F81534_MAX_DATA_BLOCK 64
#define F81534_MAX_BUS_RETRY 20
@@ -1337,8 +1340,19 @@ static int f81534_set_port_output_pin(struct usb_serial_port *port)
serial_priv = usb_get_serial_data(serial);
port_priv = usb_get_serial_port_data(port);
- idx = F81534_CONF_GPIO_OFFSET + port_priv->phy_num;
+ idx = F81534_CONF_INIT_GPIO_OFFSET + port_priv->phy_num;
value = serial_priv->conf_data[idx];
+ if (value >= F81534_CONF_GPIO_SHUTDOWN) {
+ /*
+ * Newer IC configure will make transceiver in shutdown mode on
+ * initial power on. We need enable it before using UARTs.
+ */
+ idx = F81534_CONF_WORK_GPIO_OFFSET + port_priv->phy_num;
+ value = serial_priv->conf_data[idx];
+ if (value >= F81534_CONF_GPIO_SHUTDOWN)
+ value = F81534_CONF_GPIO_RS232;
+ }
+
pins = &f81534_port_out_pins[port_priv->phy_num];
for (i = 0; i < ARRAY_SIZE(pins->pin); ++i) {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 609198d9594c..1ab2a6191013 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1130,7 +1130,7 @@ static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
{
unsigned short int divisor;
/* divisor shifted 3 bits to the left */
- int divisor3 = base / 2 / baud;
+ int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud);
if ((divisor3 & 0x7) == 7)
divisor3++; /* round x.7/8 up to x+1 */
divisor = divisor3 >> 3;
@@ -1156,7 +1156,7 @@ static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
u32 divisor;
/* divisor shifted 3 bits to the left */
- int divisor3 = base / 2 / baud;
+ int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud);
divisor = divisor3 >> 3;
divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
/* Deal with special cases for highest baud rates. */
@@ -1179,7 +1179,7 @@ static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
int divisor3;
/* hi-speed baud rate is 10-bit sampling instead of 16-bit */
- divisor3 = base * 8 / (baud * 10);
+ divisor3 = DIV_ROUND_CLOSEST(8 * base, 10 * baud);
divisor = divisor3 >> 3;
divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 88828b4b8c44..a698d46ba773 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -94,6 +94,7 @@
/* The native mos7840/7820 component */
#define USB_VENDOR_ID_MOSCHIP 0x9710
#define MOSCHIP_DEVICE_ID_7840 0x7840
+#define MOSCHIP_DEVICE_ID_7843 0x7843
#define MOSCHIP_DEVICE_ID_7820 0x7820
#define MOSCHIP_DEVICE_ID_7810 0x7810
/* The native component can have its vendor/device id's overridden
@@ -176,6 +177,7 @@ enum mos7840_flag {
static const struct usb_device_id id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
+ {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7843)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
@@ -298,15 +300,10 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
val = val & 0x00ff;
/* For the UART control registers, the application number need
to be Or'ed */
- if (port->serial->num_ports == 4) {
+ if (port->serial->num_ports == 2 && port->port_number != 0)
+ val |= ((__u16)port->port_number + 2) << 8;
+ else
val |= ((__u16)port->port_number + 1) << 8;
- } else {
- if (port->port_number == 0) {
- val |= ((__u16)port->port_number + 1) << 8;
- } else {
- val |= ((__u16)port->port_number + 2) << 8;
- }
- }
dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
MCS_WR_RTYPE, val, reg, NULL, 0,
@@ -332,15 +329,10 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
return -ENOMEM;
/* Wval is same as application number */
- if (port->serial->num_ports == 4) {
+ if (port->serial->num_ports == 2 && port->port_number != 0)
+ Wval = ((__u16)port->port_number + 2) << 8;
+ else
Wval = ((__u16)port->port_number + 1) << 8;
- } else {
- if (port->port_number == 0) {
- Wval = ((__u16)port->port_number + 1) << 8;
- } else {
- Wval = ((__u16)port->port_number + 2) << 8;
- }
- }
dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
@@ -601,7 +593,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
struct usb_serial *serial;
__u16 Data;
unsigned char *data;
- __u8 sp[5], st;
+ __u8 sp[5];
int i, rv = 0;
__u16 wval, wreg = 0;
int status = urb->status;
@@ -644,7 +636,6 @@ static void mos7840_interrupt_callback(struct urb *urb)
sp[1] = (__u8) data[1];
sp[2] = (__u8) data[2];
sp[3] = (__u8) data[3];
- st = (__u8) data[4];
for (i = 0; i < serial->num_ports; i++) {
mos7840_port = mos7840_get_port_private(serial->port[i]);
@@ -1300,7 +1291,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
struct urb *urb;
/* __u16 Data; */
const unsigned char *current_position = data;
- unsigned char *data1;
if (mos7840_port_paranoia_check(port, __func__))
return -1;
@@ -1361,7 +1351,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
mos7840_bulk_out_data_callback, mos7840_port);
}
- data1 = urb->transfer_buffer;
dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);
if (mos7840_port->has_led)
@@ -1592,7 +1581,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
int divisor = 0;
int status;
__u16 Data;
- unsigned char number;
__u16 clk_sel_val;
struct usb_serial_port *port;
@@ -1606,8 +1594,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
if (mos7840_serial_paranoia_check(port->serial, __func__))
return -1;
- number = mos7840_port->port->port_number;
-
dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate);
/* reset clk_uart_sel in spregOffset */
if (baudRate > 115200) {
@@ -1697,14 +1683,12 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
{
int baud;
unsigned cflag;
- unsigned iflag;
__u8 lData;
__u8 lParity;
__u8 lStop;
int status;
__u16 Data;
struct usb_serial_port *port;
- struct usb_serial *serial;
if (mos7840_port == NULL)
return;
@@ -1717,8 +1701,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
if (mos7840_serial_paranoia_check(port->serial, __func__))
return;
- serial = port->serial;
-
if (!mos7840_port->open) {
dev_dbg(&port->dev, "%s - port not opened\n", __func__);
return;
@@ -1729,7 +1711,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
lParity = LCR_PAR_NONE;
cflag = tty->termios.c_cflag;
- iflag = tty->termios.c_iflag;
/* Change the number of bits */
switch (cflag & CSIZE) {
@@ -2043,7 +2024,8 @@ static int mos7840_probe(struct usb_serial *serial,
int device_type;
if (product == MOSCHIP_DEVICE_ID_7810 ||
- product == MOSCHIP_DEVICE_ID_7820) {
+ product == MOSCHIP_DEVICE_ID_7820 ||
+ product == MOSCHIP_DEVICE_ID_7843) {
device_type = product;
goto out;
}
@@ -2077,7 +2059,10 @@ static int mos7840_calc_num_ports(struct usb_serial *serial,
int device_type = (unsigned long)usb_get_serial_data(serial);
int num_ports;
- num_ports = (device_type >> 4) & 0x000F;
+ if (device_type == MOSCHIP_DEVICE_ID_7843)
+ num_ports = 3;
+ else
+ num_ports = (device_type >> 4) & 0x000F;
/*
* num_ports is currently never zero as device_type is one of
@@ -2132,22 +2117,16 @@ static int mos7840_port_probe(struct usb_serial_port *port)
mos7840_port->SpRegOffset = 0x0;
mos7840_port->ControlRegOffset = 0x1;
mos7840_port->DcrRegOffset = 0x4;
- } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0x8;
- mos7840_port->ControlRegOffset = 0x9;
- mos7840_port->DcrRegOffset = 0x16;
- } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xc;
- mos7840_port->ControlRegOffset = 0xd;
- mos7840_port->DcrRegOffset = 0x1c;
+ } else {
+ u8 phy_num = mos7840_port->port_num;
+
+ /* Port 2 in the 2-port case uses registers of port 3 */
+ if (serial->num_ports == 2)
+ phy_num = 3;
+
+ mos7840_port->SpRegOffset = 0x8 + 2 * (phy_num - 2);
+ mos7840_port->ControlRegOffset = 0x9 + 2 * (phy_num - 2);
+ mos7840_port->DcrRegOffset = 0x16 + 3 * (phy_num - 2);
}
mos7840_dump_serial_port(port, mos7840_port);
mos7840_set_port_private(port, mos7840_port);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index a4e0d13fc121..98e7a5df0f6d 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,9 +91,14 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) },
{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
{ USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 26965cc23c17..4e2554d55362 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -119,10 +119,15 @@
/* Hewlett-Packard POS Pole Displays */
#define HP_VENDOR_ID 0x03f0
+#define HP_LM920_PRODUCT_ID 0x026b
+#define HP_TD620_PRODUCT_ID 0x0956
#define HP_LD960_PRODUCT_ID 0x0b39
#define HP_LCM220_PRODUCT_ID 0x3139
#define HP_LCM960_PRODUCT_ID 0x3239
#define HP_LD220_PRODUCT_ID 0x3524
+#define HP_LD220TA_PRODUCT_ID 0x4349
+#define HP_LD960TA_PRODUCT_ID 0x4439
+#define HP_LM940_PRODUCT_ID 0x5039
/* Cressi Edy (diving computer) PC interface */
#define CRESSI_VENDOR_ID 0x04b8
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index f2fbe1ec9701..a62981ca7a73 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -500,7 +500,6 @@ static void qt2_process_read_urb(struct urb *urb)
struct usb_serial *serial;
struct qt2_serial_private *serial_priv;
struct usb_serial_port *port;
- struct qt2_port_private *port_priv;
bool escapeflag;
unsigned char *ch;
int i;
@@ -514,7 +513,6 @@ static void qt2_process_read_urb(struct urb *urb)
serial = urb->context;
serial_priv = usb_get_serial_data(serial);
port = serial->port[serial_priv->current_port];
- port_priv = usb_get_serial_port_data(port);
for (i = 0; i < urb->actual_length; i++) {
ch = (unsigned char *)urb->transfer_buffer + i;
@@ -566,7 +564,6 @@ static void qt2_process_read_urb(struct urb *urb)
serial_priv->current_port = newport;
port = serial->port[serial_priv->current_port];
- port_priv = usb_get_serial_port_data(port);
i += 3;
escapeflag = true;
break;