Merge remote-tracking branch 'pfdo/drm-rcar-for-v3.12' into drm-next

Merge the rcar stable branch that is being shared with the arm-soc tree.

Signed-off-by: Dave Airlie <airlied@redhat.com>
* pfdo/drm-rcar-for-v3.12: (220 commits)
  drm/rcar-du: Add FBDEV emulation support
  drm/rcar-du: Add internal LVDS encoder support
  drm/rcar-du: Configure RGB output routing to DPAD0
  drm/rcar-du: Rework output routing support
  drm/rcar-du: Add support for DEFR8 register
  drm/rcar-du: Add support for multiple groups
  drm/rcar-du: Fix buffer pitch alignment for R8A7790 DU
  drm/rcar-du: Add support for the R8A7790 DU
  drm/rcar-du: Move output routing configuration to group
  drm/rcar-du: Remove register definitions for the second channel
  drm/rcar-du: Use dynamic number of CRTCs instead of CRTCs array size
  drm/rcar-du: Introduce CRTCs groups
  drm/rcar-du: Rename rcar_du_plane_(init|register) to rcar_du_planes_*
  drm/rcar-du: Create rcar_du_planes structure
  drm/rcar-du: Rename platform data fields to match what they describe
  drm/rcar-du: Merge LVDS and VGA encoder code
  drm/rcar-du: Split VGA encoder and connector
  drm/rcar-du: Split LVDS encoder and connector
  drm/rcar-du: Clarify comment regarding plane Y source coordinate
  drm/rcar-du: Support per-CRTC clock and IRQ
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/intel_pm.c
	drivers/gpu/drm/qxl/qxl_release.c

1 files changed, 17 insertions, 8 deletions

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 0a818b238508..603fb70dde80 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -905,20 +905,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Reading Spreg failed\n");
-		return -1;
+		goto err;
 	}
 	Data |= 0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Spreg failed\n");
-		return -1;
+		goto err;
 	}
 
 	Data &= ~0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Spreg failed\n");
-		return -1;
+		goto err;
 	}
 	/* End of block to be checked */
 
@@ -927,7 +927,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 									&Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Reading Controlreg failed\n");
-		return -1;
+		goto err;
 	}
 	Data |= 0x08;		/* Driver done bit */
 	Data |= 0x20;		/* rx_disable */
@@ -935,7 +935,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 				mos7840_port->ControlRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Controlreg failed\n");
-		return -1;
+		goto err;
 	}
 	/* do register settings here */
 	/* Set all regs to the device default values. */
@@ -946,21 +946,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "disabling interrupts failed\n");
-		return -1;
+		goto err;
 	}
 	/* Set FIFO_CONTROL_REGISTER to the default value */
 	Data = 0x00;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
-		return -1;
+		goto err;
 	}
 
 	Data = 0xcf;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
-		return -1;
+		goto err;
 	}
 
 	Data = 0x03;
@@ -1103,6 +1103,15 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	/* mos7840_change_port_settings(mos7840_port,old_termios); */
 
 	return 0;
+err:
+	for (j = 0; j < NUM_URBS; ++j) {
+		urb = mos7840_port->write_urb_pool[j];
+		if (!urb)
+			continue;
+		kfree(urb->transfer_buffer);
+		usb_free_urb(urb);
+	}
+	return status;
 }
 
 /*****************************************************************************