Merge tag 'v3.17-rc4' into next

Merge Linux 3.17-rc4 here so we have all the latest
fixes on next too. This also cleans up a few conflicts
when applying patches.

Signed-off-by: Felipe Balbi <balbi@ti.com>

Conflicts:
	drivers/usb/gadget/Makefile
	drivers/usb/gadget/function/Makefile
	drivers/usb/gadget/legacy/Makefile
	drivers/usb/phy/phy-samsung-usb.h

9 files changed, 36 insertions, 13 deletions

diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index d50adda913cf..6e6f87656e7b 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -1127,10 +1127,7 @@ void gether_disconnect(struct gether *link)
 
 	DBG(dev, "%s\n", __func__);
 
-	netif_tx_lock(dev->net);
 	netif_stop_queue(dev->net);
-	netif_tx_unlock(dev->net);
-
 	netif_carrier_off(dev->net);
 
 	/* disable endpoints, forcing (synchronous) completion
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index beba9168614a..1ff478a961a6 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -195,6 +195,7 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 		printk(KERN_INFO "Failed to queue request (%d).\n", ret);
 		usb_ep_set_halt(ep);
 		spin_unlock_irqrestore(&video->queue.irqlock, flags);
+		uvc_queue_cancel(queue, 0);
 		goto requeue;
 	}
 	spin_unlock_irqrestore(&video->queue.irqlock, flags);
@@ -281,6 +282,7 @@ error:
 static int
 uvc_video_pump(struct uvc_video *video)
 {
+	struct uvc_video_queue *queue = &video->queue;
 	struct usb_request *req;
 	struct uvc_buffer *buf;
 	unsigned long flags;
@@ -322,6 +324,7 @@ uvc_video_pump(struct uvc_video *video)
 			printk(KERN_INFO "Failed to queue request (%d)\n", ret);
 			usb_ep_set_halt(video->ep);
 			spin_unlock_irqrestore(&video->queue.irqlock, flags);
+			uvc_queue_cancel(queue, 0);
 			break;
 		}
 		spin_unlock_irqrestore(&video->queue.irqlock, flags);
diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c
index 986fc511a2ed..225e385a6160 100644
--- a/drivers/usb/gadget/legacy/dbgp.c
+++ b/drivers/usb/gadget/legacy/dbgp.c
@@ -222,10 +222,12 @@ static void dbgp_unbind(struct usb_gadget *gadget)
 {
 #ifdef CONFIG_USB_G_DBGP_SERIAL
 	kfree(dbgp.serial);
+	dbgp.serial = NULL;
 #endif
 	if (dbgp.req) {
 		kfree(dbgp.req->buf);
 		usb_ep_free_request(gadget->ep0, dbgp.req);
+		dbgp.req = NULL;
 	}
 
 	gadget->ep0->driver_data = NULL;
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index 2e4ce7704908..e96077b8bf79 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -440,7 +440,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 
 	value = -ENOMEM;
 	kbuf = memdup_user(buf, len);
-	if (!kbuf) {
+	if (IS_ERR(kbuf)) {
 		value = PTR_ERR(kbuf);
 		goto free1;
 	}
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 00171d436cf8..0c172809b53b 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -332,7 +332,7 @@ config USB_GOKU
 	   gadget drivers to also be dynamically linked.
 
 config USB_EG20T
-	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
+	tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 	depends on PCI
 	help
 	  This is a USB device driver for EG20T PCH.
@@ -353,6 +353,7 @@ config USB_EG20T
 	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
 	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 
+	  This driver can be used with Intel's Quark X1000 SOC platform
 #
 # LAST -- dummy/emulated controller
 #
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 906e65f0e4fa..c9fe67e29d35 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 	if (dma_status) {
 		int i;
 
-		for (i = 1; i < USBA_NR_DMAS; i++)
+		for (i = 1; i <= USBA_NR_DMAS; i++)
 			if (dma_status & (1 << i))
 				usba_dma_irq(udc, &udc->usba_ep[i]);
 	}
diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
index d40255f784df..5c5d1adda7eb 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.c
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -1398,13 +1398,17 @@ static int fusb300_probe(struct platform_device *pdev)
 
 	/* initialize udc */
 	fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL);
-	if (fusb300 == NULL)
+	if (fusb300 == NULL) {
+		ret = -ENOMEM;
 		goto clean_up;
+	}
 
 	for (i = 0; i < FUSB300_MAX_NUM_EP; i++) {
 		_ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL);
-		if (_ep[i] == NULL)
+		if (_ep[i] == NULL) {
+			ret = -ENOMEM;
 			goto clean_up;
+		}
 		fusb300->ep[i] = _ep[i];
 	}
 
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index eb8c3bedb57a..460d953c91b6 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -343,6 +343,7 @@ struct pch_vbus_gpio_data {
  * @setup_data:		Received setup data
  * @phys_addr:		of device memory
  * @base_addr:		for mapped device memory
+ * @bar:		Indicates which PCI BAR for USB regs
  * @irq:		IRQ line for the device
  * @cfg_data:		current cfg, intf, and alt in use
  * @vbus_gpio:		GPIO informaton for detecting VBUS
@@ -370,14 +371,17 @@ struct pch_udc_dev {
 	struct usb_ctrlrequest		setup_data;
 	unsigned long			phys_addr;
 	void __iomem			*base_addr;
+	unsigned			bar;
 	unsigned			irq;
 	struct pch_udc_cfg_data		cfg_data;
 	struct pch_vbus_gpio_data	vbus_gpio;
 };
 #define to_pch_udc(g)	(container_of((g), struct pch_udc_dev, gadget))
 
+#define PCH_UDC_PCI_BAR_QUARK_X1000	0
 #define PCH_UDC_PCI_BAR			1
 #define PCI_DEVICE_ID_INTEL_EG20T_UDC	0x8808
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC	0x0939
 #define PCI_VENDOR_ID_ROHM		0x10DB
 #define PCI_DEVICE_ID_ML7213_IOH_UDC	0x801D
 #define PCI_DEVICE_ID_ML7831_IOH_UDC	0x8808
@@ -3076,7 +3080,7 @@ static void pch_udc_remove(struct pci_dev *pdev)
 		iounmap(dev->base_addr);
 	if (dev->mem_region)
 		release_mem_region(dev->phys_addr,
-				   pci_resource_len(pdev, PCH_UDC_PCI_BAR));
+				   pci_resource_len(pdev, dev->bar));
 	if (dev->active)
 		pci_disable_device(pdev);
 	kfree(dev);
@@ -3144,9 +3148,15 @@ static int pch_udc_probe(struct pci_dev *pdev,
 	dev->active = 1;
 	pci_set_drvdata(pdev, dev);
 
+	/* Determine BAR based on PCI ID */
+	if (id->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC)
+		dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000;
+	else
+		dev->bar = PCH_UDC_PCI_BAR;
+
 	/* PCI resource allocation */
-	resource = pci_resource_start(pdev, 1);
-	len = pci_resource_len(pdev, 1);
+	resource = pci_resource_start(pdev, dev->bar);
+	len = pci_resource_len(pdev, dev->bar);
 
 	if (!request_mem_region(resource, len, KBUILD_MODNAME)) {
 		dev_err(&pdev->dev, "%s: pci device used already\n", __func__);
@@ -3212,6 +3222,12 @@ finished:
 
 static const struct pci_device_id pch_udc_pcidev_id[] = {
 	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+			   PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC),
+		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+		.class_mask = 0xffffffff,
+	},
+	{
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
 		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
 		.class_mask = 0xffffffff,
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index 00f7345f6951..de9c400b9944 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1866,8 +1866,8 @@ static int r8a66597_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	reg = devm_ioremap_resource(&pdev->dev, res);
-	if (!reg)
-		return -ENODEV;
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
 
 	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	irq = ires->start;