diff options
author | Krzysztof Kozlowski <krzk@kernel.org> | 2019-09-23 17:49:56 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-10-04 14:09:41 +0200 |
commit | c2c1c66b5d4360debc9564d0aa11c873ed2e7aaa (patch) | |
tree | a1cc9deb3a668bd1c27bc1a34fb1e347dce111f4 /drivers/usb/gadget | |
parent | 8f9b6228b2fcc58508774cfdfdcc4e3ac35ff7c8 (diff) | |
download | linux-c2c1c66b5d4360debc9564d0aa11c873ed2e7aaa.tar.bz2 |
usb: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190923154956.6868-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r-- | drivers/usb/gadget/legacy/Kconfig | 20 | ||||
-rw-r--r-- | drivers/usb/gadget/udc/Kconfig | 2 |
2 files changed, 11 insertions, 11 deletions
diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index 69ff7f8c86f5..38eaa9417b38 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -154,16 +154,16 @@ config USB_ETH_EEM select USB_LIBCOMPOSITE select USB_F_EEM help - CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM - and therefore can be supported by more hardware. Technically ECM and - EEM are designed for different applications. The ECM model extends - the network interface to the target (e.g. a USB cable modem), and the - EEM model is for mobile devices to communicate with hosts using - ethernet over USB. For Linux gadgets, however, the interface with - the host is the same (a usbX device), so the differences are minimal. - - If you say "y" here, the Ethernet gadget driver will use the EEM - protocol rather than ECM. If unsure, say "n". + CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM + and therefore can be supported by more hardware. Technically ECM and + EEM are designed for different applications. The ECM model extends + the network interface to the target (e.g. a USB cable modem), and the + EEM model is for mobile devices to communicate with hosts using + ethernet over USB. For Linux gadgets, however, the interface with + the host is the same (a usbX device), so the differences are minimal. + + If you say "y" here, the Ethernet gadget driver will use the EEM + protocol rather than ECM. If unsure, say "n". config USB_G_NCM tristate "Network Control Model (NCM) support" diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index d7e611645533..485c92ef888a 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -123,7 +123,7 @@ config USB_GR_UDC tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver" depends on HAS_DMA help - Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB + Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB VHDL IP core library. config USB_OMAP |