Merge tag 'v3.4-rc5' into next

Linux 3.4-rc5

Merge to pull in prerequisite change for Smack:
86812bb0de1a3758dc6c7aa01a763158a7c0638a

Requested by Casey.

6 files changed, 65 insertions, 13 deletions

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index f8e2d6d52e5c..9a56635dc19c 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1189,8 +1189,13 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	if (status == 0) {
 		status = usb_suspend_device(udev, msg);
 
-		/* Again, ignore errors during system sleep transitions */
-		if (!PMSG_IS_AUTO(msg))
+		/*
+		 * Ignore errors from non-root-hub devices during
+		 * system sleep transitions.  For the most part,
+		 * these devices should go to low power anyway when
+		 * the entire bus is suspended.
+		 */
+		if (udev->parent && !PMSG_IS_AUTO(msg))
 			status = 0;
 	}
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 622b4a48e732..57ed9e400c06 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 
 	pci_save_state(pci_dev);
 
+	/*
+	 * Some systems crash if an EHCI controller is in D3 during
+	 * a sleep transition.  We have to leave such controllers in D0.
+	 */
+	if (hcd->broken_pci_sleep) {
+		dev_dbg(dev, "Staying in PCI D0\n");
+		return retval;
+	}
+
 	/* If the root hub is dead rather than suspended, disallow remote
 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 	 * dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 9d7fc9a39933..140d3e11f212 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1978,6 +1978,18 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
 	if (status == 0) {
 		usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
 		hcd->state = HC_STATE_SUSPENDED;
+
+		/* Did we race with a root-hub wakeup event? */
+		if (rhdev->do_remote_wakeup) {
+			char	buffer[6];
+
+			status = hcd->driver->hub_status_data(hcd, buffer);
+			if (status != 0) {
+				dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
+				hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
+				status = -EBUSY;
+			}
+		}
 	} else {
 		spin_lock_irq(&hcd_root_hub_lock);
 		if (!HCD_DEAD(hcd)) {
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 28664eb7f555..ec6c97dadbe4 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1667,7 +1667,6 @@ void usb_disconnect(struct usb_device **pdev)
 {
 	struct usb_device	*udev = *pdev;
 	int			i;
-	struct usb_hcd		*hcd = bus_to_hcd(udev->bus);
 
 	/* mark the device as inactive, so any further urb submissions for
 	 * this device (and any of its children) will fail immediately.
@@ -1690,9 +1689,7 @@ void usb_disconnect(struct usb_device **pdev)
 	 * so that the hardware is now fully quiesced.
 	 */
 	dev_dbg (&udev->dev, "unregistering device\n");
-	mutex_lock(hcd->bandwidth_mutex);
 	usb_disable_device(udev, 0);
-	mutex_unlock(hcd->bandwidth_mutex);
 	usb_hcd_synchronize_unlinks(udev);
 
 	usb_remove_ep_devs(&udev->ep0);
@@ -3163,6 +3160,22 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (retval)
 		goto fail;
 
+	/*
+	 * Some superspeed devices have finished the link training process
+	 * and attached to a superspeed hub port, but the device descriptor
+	 * got from those devices show they aren't superspeed devices. Warm
+	 * reset the port attached by the devices can fix them.
+	 */
+	if ((udev->speed == USB_SPEED_SUPER) &&
+			(le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
+		dev_err(&udev->dev, "got a wrong device descriptor, "
+				"warm reset device\n");
+		hub_port_reset(hub, port1, udev,
+				HUB_BH_RESET_TIME, true);
+		retval = -EINVAL;
+		goto fail;
+	}
+
 	if (udev->descriptor.bMaxPacketSize0 == 0xff ||
 			udev->speed == USB_SPEED_SUPER)
 		i = 512;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b3bdfede45e6..ca717da3be95 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -308,7 +308,8 @@ static void sg_complete(struct urb *urb)
 				retval = usb_unlink_urb(io->urbs [i]);
 				if (retval != -EINPROGRESS &&
 				    retval != -ENODEV &&
-				    retval != -EBUSY)
+				    retval != -EBUSY &&
+				    retval != -EIDRM)
 					dev_err(&io->dev->dev,
 						"%s, unlink --> %d\n",
 						__func__, retval);
@@ -317,7 +318,6 @@ static void sg_complete(struct urb *urb)
 		}
 		spin_lock(&io->lock);
 	}
-	urb->dev = NULL;
 
 	/* on the last completion, signal usb_sg_wait() */
 	io->bytes += urb->actual_length;
@@ -524,7 +524,6 @@ void usb_sg_wait(struct usb_sg_request *io)
 		case -ENXIO:	/* hc didn't queue this one */
 		case -EAGAIN:
 		case -ENOMEM:
-			io->urbs[i]->dev = NULL;
 			retval = 0;
 			yield();
 			break;
@@ -542,7 +541,6 @@ void usb_sg_wait(struct usb_sg_request *io)
 
 			/* fail any uncompleted urbs */
 		default:
-			io->urbs[i]->dev = NULL;
 			io->urbs[i]->status = retval;
 			dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
 				__func__, retval);
@@ -593,7 +591,10 @@ void usb_sg_cancel(struct usb_sg_request *io)
 			if (!io->urbs [i]->dev)
 				continue;
 			retval = usb_unlink_urb(io->urbs [i]);
-			if (retval != -EINPROGRESS && retval != -EBUSY)
+			if (retval != -EINPROGRESS
+					&& retval != -ENODEV
+					&& retval != -EBUSY
+					&& retval != -EIDRM)
 				dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
 					__func__, retval);
 		}
@@ -1135,8 +1136,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
  * Deallocates hcd/hardware state for the endpoints (nuking all or most
  * pending urbs) and usbcore state for the interfaces, so that usbcore
  * must usb_set_configuration() before any interfaces could be used.
- *
- * Must be called with hcd->bandwidth_mutex held.
  */
 void usb_disable_device(struct usb_device *dev, int skip_ep0)
 {
@@ -1189,7 +1188,9 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
 		}
 		/* Remove endpoints from the host controller internal state */
+		mutex_lock(hcd->bandwidth_mutex);
 		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		mutex_unlock(hcd->bandwidth_mutex);
 		/* Second pass: remove endpoint pointers */
 	}
 	for (i = skip_ep0; i < 16; ++i) {
@@ -1749,7 +1750,6 @@ free_interfaces:
 	/* if it's already configured, clear out old state first.
 	 * getting rid of old interfaces means unbinding their drivers.
 	 */
-	mutex_lock(hcd->bandwidth_mutex);
 	if (dev->state != USB_STATE_ADDRESS)
 		usb_disable_device(dev, 1);	/* Skip ep0 */
 
@@ -1762,6 +1762,7 @@ free_interfaces:
 	 * host controller will not allow submissions to dropped endpoints.  If
 	 * this call fails, the device state is unchanged.
 	 */
+	mutex_lock(hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
 	if (ret < 0) {
 		mutex_unlock(hcd->bandwidth_mutex);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 7239a73c1b8c..cd9b3a2cd8a7 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -539,6 +539,10 @@ EXPORT_SYMBOL_GPL(usb_submit_urb);
  * never submitted, or it was unlinked before, or the hardware is already
  * finished with it), even if the completion handler has not yet run.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * Unlinking and Endpoint Queues:
  *
  * [The behaviors and guarantees described below do not apply to virtual
@@ -603,6 +607,10 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb);
  * with error -EPERM.  Thus even if the URB's completion handler always
  * tries to resubmit, it will not succeed and the URB will become idle.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().
@@ -640,6 +648,10 @@ EXPORT_SYMBOL_GPL(usb_kill_urb);
  * with error -EPERM.  Thus even if the URB's completion handler always
  * tries to resubmit, it will not succeed and the URB will become idle.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().