Merge drm/drm-next into drm-intel-gt-next

Maarten needs backmerge to account for header file renames/changes which
landed via drm-intel-next and are interfering with his pinning work.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

3 files changed, 24 insertions, 9 deletions

diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 16b1fd9dc60c..48bc8a4814ac 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -406,7 +406,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
 	 * the USB-2 spec requires such endpoints to have wMaxPacketSize = 0
 	 * (see the end of section 5.6.3), so don't warn about them.
 	 */
-	maxp = usb_endpoint_maxp(&endpoint->desc);
+	maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize);
 	if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) {
 		dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n",
 		    cfgno, inum, asnum, d->bEndpointAddress);
@@ -422,9 +422,9 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
 		maxpacket_maxes = full_speed_maxpacket_maxes;
 		break;
 	case USB_SPEED_HIGH:
-		/* Bits 12..11 are allowed only for HS periodic endpoints */
+		/* Multiple-transactions bits are allowed only for HS periodic endpoints */
 		if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) {
-			i = maxp & (BIT(12) | BIT(11));
+			i = maxp & USB_EP_MAXP_MULT_MASK;
 			maxp &= ~i;
 		}
 		fallthrough;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 86658a81d284..00070a8a6507 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4700,8 +4700,6 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (oldspeed == USB_SPEED_LOW)
 		delay = HUB_LONG_RESET_TIME;
 
-	mutex_lock(hcd->address0_mutex);
-
 	/* Reset the device; full speed may morph to high speed */
 	/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
 	retval = hub_port_reset(hub, port1, udev, delay, false);
@@ -5016,7 +5014,6 @@ fail:
 		hub_port_disable(hub, port1, 0);
 		update_devnum(udev, devnum);	/* for disconnect processing */
 	}
-	mutex_unlock(hcd->address0_mutex);
 	return retval;
 }
 
@@ -5191,6 +5188,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 	struct usb_port *port_dev = hub->ports[port1 - 1];
 	struct usb_device *udev = port_dev->child;
 	static int unreliable_port = -1;
+	bool retry_locked;
 
 	/* Disconnect any existing devices under this port */
 	if (udev) {
@@ -5246,8 +5244,11 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		unit_load = 100;
 
 	status = 0;
-	for (i = 0; i < PORT_INIT_TRIES; i++) {
 
+	for (i = 0; i < PORT_INIT_TRIES; i++) {
+		usb_lock_port(port_dev);
+		mutex_lock(hcd->address0_mutex);
+		retry_locked = true;
 		/* reallocate for each attempt, since references
 		 * to the previous one can escape in various ways
 		 */
@@ -5255,6 +5256,8 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		if (!udev) {
 			dev_err(&port_dev->dev,
 					"couldn't allocate usb_device\n");
+			mutex_unlock(hcd->address0_mutex);
+			usb_unlock_port(port_dev);
 			goto done;
 		}
 
@@ -5276,12 +5279,14 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		}
 
 		/* reset (non-USB 3.0 devices) and get descriptor */
-		usb_lock_port(port_dev);
 		status = hub_port_init(hub, udev, port1, i);
-		usb_unlock_port(port_dev);
 		if (status < 0)
 			goto loop;
 
+		mutex_unlock(hcd->address0_mutex);
+		usb_unlock_port(port_dev);
+		retry_locked = false;
+
 		if (udev->quirks & USB_QUIRK_DELAY_INIT)
 			msleep(2000);
 
@@ -5374,6 +5379,10 @@ loop:
 		usb_ep0_reinit(udev);
 		release_devnum(udev);
 		hub_free_dev(udev);
+		if (retry_locked) {
+			mutex_unlock(hcd->address0_mutex);
+			usb_unlock_port(port_dev);
+		}
 		usb_put_dev(udev);
 		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
 			break;
@@ -5915,6 +5924,8 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	bos = udev->bos;
 	udev->bos = NULL;
 
+	mutex_lock(hcd->address0_mutex);
+
 	for (i = 0; i < PORT_INIT_TRIES; ++i) {
 
 		/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5924,6 +5935,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 		if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
 			break;
 	}
+	mutex_unlock(hcd->address0_mutex);
 
 	if (ret < 0)
 		goto re_enumerate;
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 8239fe7129dd..019351c0b52c 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -434,6 +434,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x1532, 0x0116), .driver_info =
 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
 
+	/* Lenovo Powered USB-C Travel Hub (4X90S92381, RTL8153 GigE) */
+	{ USB_DEVICE(0x17ef, 0x721e), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* Lenovo ThinkCenter A630Z TI024Gen3 usb-audio */
 	{ USB_DEVICE(0x17ef, 0xa012), .driver_info =
 			USB_QUIRK_DISCONNECT_SUSPEND },