fsi: Add regmap and refactor sbefifo

Merge series from Eddie James <eajames@linux.ibm.com>:

The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.

This branch just has the regmap change so it can be shared with the FSI
code.

1 files changed, 28 insertions, 28 deletions

diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
index 9643b905e2d8..6164fc4c96a4 100644
--- a/drivers/usb/cdns3/host.c
+++ b/drivers/usb/cdns3/host.c
@@ -24,11 +24,37 @@
 #define CFG_RXDET_P3_EN		BIT(15)
 #define LPM_2_STB_SWITCH_EN	BIT(25)
 
-static int xhci_cdns3_suspend_quirk(struct usb_hcd *hcd);
+static void xhci_cdns3_plat_start(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	u32 value;
+
+	/* set usbcmd.EU3S */
+	value = readl(&xhci->op_regs->command);
+	value |= CMD_PM_INDEX;
+	writel(value, &xhci->op_regs->command);
+
+	if (hcd->regs) {
+		value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
+		value |= CFG_RXDET_P3_EN;
+		writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
+
+		value = readl(hcd->regs + XECP_PORT_CAP_REG);
+		value |= LPM_2_STB_SWITCH_EN;
+		writel(value, hcd->regs + XECP_PORT_CAP_REG);
+	}
+}
+
+static int xhci_cdns3_resume_quirk(struct usb_hcd *hcd)
+{
+	xhci_cdns3_plat_start(hcd);
+	return 0;
+}
 
 static const struct xhci_plat_priv xhci_plat_cdns3_xhci = {
 	.quirks = XHCI_SKIP_PHY_INIT | XHCI_AVOID_BEI,
-	.suspend_quirk = xhci_cdns3_suspend_quirk,
+	.plat_start = xhci_cdns3_plat_start,
+	.resume_quirk = xhci_cdns3_resume_quirk,
 };
 
 static int __cdns_host_init(struct cdns *cdns)
@@ -90,32 +116,6 @@ err1:
 	return ret;
 }
 
-static int xhci_cdns3_suspend_quirk(struct usb_hcd *hcd)
-{
-	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	u32 value;
-
-	if (pm_runtime_status_suspended(hcd->self.controller))
-		return 0;
-
-	/* set usbcmd.EU3S */
-	value = readl(&xhci->op_regs->command);
-	value |= CMD_PM_INDEX;
-	writel(value, &xhci->op_regs->command);
-
-	if (hcd->regs) {
-		value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
-		value |= CFG_RXDET_P3_EN;
-		writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
-
-		value = readl(hcd->regs + XECP_PORT_CAP_REG);
-		value |= LPM_2_STB_SWITCH_EN;
-		writel(value, hcd->regs + XECP_PORT_CAP_REG);
-	}
-
-	return 0;
-}
-
 static void cdns_host_exit(struct cdns *cdns)
 {
 	kfree(cdns->xhci_plat_data);