summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-11-07 12:17:06 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2013-11-07 12:17:06 +0900
commit56edff7529d0baa6d7b38b58f46631c7b9f4136e (patch)
tree37729cd0a56ad31601fb573ccf3f5a2d7bee52e8 /drivers/tty
parent0324e74534241f3f00910ec04ef67de1fe1542f4 (diff)
parent80d8611dd07603736d14e4a942546bdc84dd5477 (diff)
downloadlinux-56edff7529d0baa6d7b38b58f46631c7b9f4136e.tar.bz2
Merge tag 'tty-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH: "Here's the big tty/serial driver update for 3.13-rc1. There's some more minor n_tty work here, but nothing like previous kernel releases. Also some new driver ids, driver updates for new hardware, and other small things. All of this has been in linux-next for a while with no issues" * tag 'tty-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (84 commits) serial: omap: fix missing comma serial: sh-sci: Enable the driver on all ARM platforms serial: mfd: Staticize local symbols serial: omap: fix a few checkpatch warnings serial: omap: improve RS-485 performance mrst_max3110: fix unbalanced IRQ issue during resume serial: omap: Add support for optional wake-up serial: sirf: remove duplicate defines tty: xuartps: Fix build error when COMMON_CLK is not set tty: xuartps: Fix build error due to missing forward declaration tty: xuartps: Fix "may be used uninitialized" build warning serial: 8250_pci: add Pericom PCIe Serial board Support (12d8:7952/4/8) - Chip PI7C9X7952/4/8 tty: xuartps: Update copyright information tty: xuartps: Implement suspend/resume callbacks tty: xuartps: Dynamically adjust to input frequency changes tty: xuartps: Updating set_baud_rate() tty: xuartps: Force enable the UART in xuartps_console_write tty: xuartps: support 64 byte FIFO size tty: xuartps: Add polled mode support for xuartps tty: xuartps: Implement BREAK detection, add SYSRQ support ...
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/bfin_jtag_comm.c2
-rw-r--r--drivers/tty/hvc/hvc_dcc.c21
-rw-r--r--drivers/tty/hvc/hvc_vio.c5
-rw-r--r--drivers/tty/n_tty.c13
-rw-r--r--drivers/tty/nozomi.c6
-rw-r--r--drivers/tty/serial/8250/8250_core.c2
-rw-r--r--drivers/tty/serial/8250/8250_dw.c76
-rw-r--r--drivers/tty/serial/8250/8250_em.c6
-rw-r--r--drivers/tty/serial/8250/8250_pci.c347
-rw-r--r--drivers/tty/serial/Kconfig3
-rw-r--r--drivers/tty/serial/amba-pl010.c3
-rw-r--r--drivers/tty/serial/amba-pl011.c3
-rw-r--r--drivers/tty/serial/arc_uart.c2
-rw-r--r--drivers/tty/serial/atmel_serial.c19
-rw-r--r--drivers/tty/serial/bfin_sport_uart.c11
-rw-r--r--drivers/tty/serial/bfin_uart.c21
-rw-r--r--drivers/tty/serial/clps711x.c2
-rw-r--r--drivers/tty/serial/ifx6x60.c2
-rw-r--r--drivers/tty/serial/imx.c82
-rw-r--r--drivers/tty/serial/ip22zilog.c2
-rw-r--r--drivers/tty/serial/max310x.c2
-rw-r--r--drivers/tty/serial/mfd.c13
-rw-r--r--drivers/tty/serial/mpc52xx_uart.c5
-rw-r--r--drivers/tty/serial/mpsc.c2
-rw-r--r--drivers/tty/serial/mrst_max3110.c45
-rw-r--r--drivers/tty/serial/mxs-auart.c9
-rw-r--r--drivers/tty/serial/omap-serial.c141
-rw-r--r--drivers/tty/serial/pch_uart.c3
-rw-r--r--drivers/tty/serial/pmac_zilog.c2
-rw-r--r--drivers/tty/serial/sa1100.c5
-rw-r--r--drivers/tty/serial/samsung.c22
-rw-r--r--drivers/tty/serial/samsung.h2
-rw-r--r--drivers/tty/serial/sccnxp.c1
-rw-r--r--drivers/tty/serial/serial-tegra.c2
-rw-r--r--drivers/tty/serial/serial_txx9.c2
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c11
-rw-r--r--drivers/tty/serial/sirfsoc_uart.h12
-rw-r--r--drivers/tty/serial/sunsab.c2
-rw-r--r--drivers/tty/serial/sunsu.c2
-rw-r--r--drivers/tty/serial/sunzilog.c6
-rw-r--r--drivers/tty/serial/ucc_uart.c2
-rw-r--r--drivers/tty/serial/xilinx_uartps.c551
-rw-r--r--drivers/tty/sysrq.c2
-rw-r--r--drivers/tty/tty_port.c10
-rw-r--r--drivers/tty/vt/vt.c33
45 files changed, 1174 insertions, 341 deletions
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index a93a424873fa..8096fcbe2dc1 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -349,7 +349,7 @@ bfin_jc_early_write(struct console *co, const char *buf, unsigned int count)
bfin_jc_straight_buffer_write(buf, count);
}
-static struct __initdata console bfin_jc_early_console = {
+static struct console bfin_jc_early_console __initdata = {
.name = "early_BFJC",
.write = bfin_jc_early_write,
.flags = CON_ANYTIME | CON_PRINTBUFFER,
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 44fbebab5075..3502a7bbb69e 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -86,6 +86,21 @@ static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count)
return i;
}
+static bool hvc_dcc_check(void)
+{
+ unsigned long time = jiffies + (HZ / 10);
+
+ /* Write a test character to check if it is handled */
+ __dcc_putchar('\n');
+
+ while (time_is_after_jiffies(time)) {
+ if (!(__dcc_getstatus() & DCC_STATUS_TX))
+ return true;
+ }
+
+ return false;
+}
+
static const struct hv_ops hvc_dcc_get_put_ops = {
.get_chars = hvc_dcc_get_chars,
.put_chars = hvc_dcc_put_chars,
@@ -93,6 +108,9 @@ static const struct hv_ops hvc_dcc_get_put_ops = {
static int __init hvc_dcc_console_init(void)
{
+ if (!hvc_dcc_check())
+ return -ENODEV;
+
hvc_instantiate(0, 0, &hvc_dcc_get_put_ops);
return 0;
}
@@ -100,6 +118,9 @@ console_initcall(hvc_dcc_console_init);
static int __init hvc_dcc_init(void)
{
+ if (!hvc_dcc_check())
+ return -ENODEV;
+
hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128);
return 0;
}
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index c791b18cdd08..b594abfbf21e 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -48,6 +48,7 @@
#include <asm/prom.h>
#include <asm/hvsi.h>
#include <asm/udbg.h>
+#include <asm/machdep.h>
#include "hvc_console.h"
@@ -457,7 +458,9 @@ void __init hvc_vio_init_early(void)
if (hvterm_priv0.proto == HV_PROTOCOL_HVSI)
goto out;
#endif
- add_preferred_console("hvc", 0, NULL);
+ /* Check whether the user has requested a different console. */
+ if (!strstr(cmd_line, "console="))
+ add_preferred_console("hvc", 0, NULL);
hvc_instantiate(0, 0, ops);
out:
of_node_put(stdout_node);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 7a744b69c3d1..7cdd1eb9406c 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -767,7 +767,7 @@ static size_t __process_echoes(struct tty_struct *tty)
* of echo overrun before the next commit), then discard enough
* data at the tail to prevent a subsequent overrun */
while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) {
- if (echo_buf(ldata, tail == ECHO_OP_START)) {
+ if (echo_buf(ldata, tail) == ECHO_OP_START) {
if (echo_buf(ldata, tail) == ECHO_OP_ERASE_TAB)
tail += 3;
else
@@ -1752,20 +1752,14 @@ int is_ignored(int sig)
static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
struct n_tty_data *ldata = tty->disc_data;
- int canon_change = 1;
- if (old)
- canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
- if (canon_change) {
+ if (!old || (old->c_lflag ^ tty->termios.c_lflag) & ICANON) {
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
ldata->line_start = ldata->canon_head = ldata->read_tail;
ldata->erasing = 0;
ldata->lnext = 0;
}
- if (canon_change && !L_ICANON(tty) && read_cnt(ldata))
- wake_up_interruptible(&tty->read_wait);
-
ldata->icanon = (L_ICANON(tty) != 0);
if (I_ISTRIP(tty) || I_IUCLC(tty) || I_IGNCR(tty) ||
@@ -1820,9 +1814,8 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
* Fix tty hang when I_IXON(tty) is cleared, but the tty
* been stopped by STOP_CHAR(tty) before it.
*/
- if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) {
+ if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped)
start_tty(tty);
- }
/* The termios change make the tty ready for I/O */
wake_up_interruptible(&tty->write_wait);
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index d6080c3831ef..cd0429369557 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -959,7 +959,7 @@ static int receive_flow_control(struct nozomi *dc)
dev_err(&dc->pdev->dev,
"ERROR: flow control received for non-existing port\n");
return 0;
- };
+ }
DBG1("0x%04X->0x%04X", *((u16 *)&dc->port[port].ctrl_dl),
*((u16 *)&ctrl_dl));
@@ -1025,7 +1025,7 @@ static enum ctrl_port_type port2ctrl(enum port_type port,
dev_err(&dc->pdev->dev,
"ERROR: send flow control " \
"received for non-existing port\n");
- };
+ }
return CTRL_ERROR;
}
@@ -1805,7 +1805,7 @@ static int ntty_ioctl(struct tty_struct *tty,
default:
DBG1("ERR: 0x%08X, %d", cmd, cmd);
break;
- };
+ }
return rval;
}
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 570df9d2a5d2..e33d38cb170f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2322,7 +2322,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
fcr = uart_config[port->type].fcr;
- if (baud < 2400 || fifo_bug) {
+ if ((baud < 2400 && !up->dma) || fifo_bug) {
fcr &= ~UART_FCR_TRIGGER_MASK;
fcr |= UART_FCR_TRIGGER_1;
}
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index daf710f5c3fc..4658e3e0ec42 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -56,11 +56,11 @@
struct dw8250_data {
- int last_lcr;
- int last_mcr;
- int line;
- struct clk *clk;
- u8 usr_reg;
+ u8 usr_reg;
+ int last_mcr;
+ int line;
+ struct clk *clk;
+ struct uart_8250_dma dma;
};
static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
@@ -76,17 +76,33 @@ static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
return value;
}
+static void dw8250_force_idle(struct uart_port *p)
+{
+ serial8250_clear_and_reinit_fifos(container_of
+ (p, struct uart_8250_port, port));
+ (void)p->serial_in(p, UART_RX);
+}
+
static void dw8250_serial_out(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
- if (offset == UART_LCR)
- d->last_lcr = value;
-
if (offset == UART_MCR)
d->last_mcr = value;
writeb(value, p->membase + (offset << p->regshift));
+
+ /* Make sure LCR write wasn't ignored */
+ if (offset == UART_LCR) {
+ int tries = 1000;
+ while (tries--) {
+ if (value == p->serial_in(p, UART_LCR))
+ return;
+ dw8250_force_idle(p);
+ writeb(value, p->membase + (UART_LCR << p->regshift));
+ }
+ dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ }
}
static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
@@ -107,13 +123,22 @@ static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
- if (offset == UART_LCR)
- d->last_lcr = value;
-
if (offset == UART_MCR)
d->last_mcr = value;
writel(value, p->membase + (offset << p->regshift));
+
+ /* Make sure LCR write wasn't ignored */
+ if (offset == UART_LCR) {
+ int tries = 1000;
+ while (tries--) {
+ if (value == p->serial_in(p, UART_LCR))
+ return;
+ dw8250_force_idle(p);
+ writel(value, p->membase + (UART_LCR << p->regshift));
+ }
+ dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ }
}
static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
@@ -131,9 +156,8 @@ static int dw8250_handle_irq(struct uart_port *p)
if (serial8250_handle_irq(p, iir)) {
return 1;
} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
- /* Clear the USR and write the LCR again. */
+ /* Clear the USR */
(void)p->serial_in(p, d->usr_reg);
- p->serial_out(p, UART_LCR, d->last_lcr);
return 1;
}
@@ -153,6 +177,14 @@ dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
pm_runtime_put_sync_suspend(port->dev);
}
+static bool dw8250_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct dw8250_data *data = param;
+
+ return chan->chan_id == data->dma.tx_chan_id ||
+ chan->chan_id == data->dma.rx_chan_id;
+}
+
static void dw8250_setup_port(struct uart_8250_port *up)
{
struct uart_port *p = &up->port;
@@ -241,7 +273,8 @@ static int dw8250_probe_of(struct uart_port *p,
}
#ifdef CONFIG_ACPI
-static int dw8250_probe_acpi(struct uart_8250_port *up)
+static int dw8250_probe_acpi(struct uart_8250_port *up,
+ struct dw8250_data *data)
{
const struct acpi_device_id *id;
struct uart_port *p = &up->port;
@@ -260,9 +293,7 @@ static int dw8250_probe_acpi(struct uart_8250_port *up)
if (!p->uartclk)
p->uartclk = (unsigned int)id->driver_data;
- up->dma = devm_kzalloc(p->dev, sizeof(*up->dma), GFP_KERNEL);
- if (!up->dma)
- return -ENOMEM;
+ up->dma = &data->dma;
up->dma->rxconf.src_maxburst = p->fifosize / 4;
up->dma->txconf.dst_maxburst = p->fifosize / 4;
@@ -270,7 +301,8 @@ static int dw8250_probe_acpi(struct uart_8250_port *up)
return 0;
}
#else
-static inline int dw8250_probe_acpi(struct uart_8250_port *up)
+static inline int dw8250_probe_acpi(struct uart_8250_port *up,
+ struct dw8250_data *data)
{
return -ENODEV;
}
@@ -314,6 +346,12 @@ static int dw8250_probe(struct platform_device *pdev)
uart.port.uartclk = clk_get_rate(data->clk);
}
+ data->dma.rx_chan_id = -1;
+ data->dma.tx_chan_id = -1;
+ data->dma.rx_param = data;
+ data->dma.tx_param = data;
+ data->dma.fn = dw8250_dma_filter;
+
uart.port.iotype = UPIO_MEM;
uart.port.serial_in = dw8250_serial_in;
uart.port.serial_out = dw8250_serial_out;
@@ -324,7 +362,7 @@ static int dw8250_probe(struct platform_device *pdev)
if (err)
return err;
} else if (ACPI_HANDLE(&pdev->dev)) {
- err = dw8250_probe_acpi(&uart);
+ err = dw8250_probe_acpi(&uart, data);
if (err)
return err;
} else {
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index 5f3bba12c159..d1a9078003bd 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -122,7 +122,7 @@ static int serial8250_em_probe(struct platform_device *pdev)
up.port.dev = &pdev->dev;
up.port.private_data = priv;
- clk_enable(priv->sclk);
+ clk_prepare_enable(priv->sclk);
up.port.uartclk = clk_get_rate(priv->sclk);
up.port.iotype = UPIO_MEM32;
@@ -134,7 +134,7 @@ static int serial8250_em_probe(struct platform_device *pdev)
ret = serial8250_register_8250_port(&up);
if (ret < 0) {
dev_err(&pdev->dev, "unable to register 8250 port\n");
- clk_disable(priv->sclk);
+ clk_disable_unprepare(priv->sclk);
return ret;
}
@@ -148,7 +148,7 @@ static int serial8250_em_remove(struct platform_device *pdev)
struct serial8250_em_priv *priv = platform_get_drvdata(pdev);
serial8250_unregister_port(priv->line);
- clk_disable(priv->sclk);
+ clk_disable_unprepare(priv->sclk);
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c810da7c7a88..4697a514b80a 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -9,6 +9,7 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
+#undef DEBUG
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
@@ -27,8 +28,6 @@
#include "8250.h"
-#undef SERIAL_DEBUG_PCI
-
/*
* init function returns:
* > 0 - number of ports
@@ -63,7 +62,7 @@ static int pci_default_setup(struct serial_private*,
static void moan_device(const char *str, struct pci_dev *dev)
{
- printk(KERN_WARNING
+ dev_err(&dev->dev,
"%s: %s\n"
"Please send the output of lspci -vv, this\n"
"message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
@@ -233,7 +232,7 @@ static int pci_inteli960ni_init(struct pci_dev *dev)
/* is firmware started? */
pci_read_config_dword(dev, 0x44, (void *)&oldval);
if (oldval == 0x00001000L) { /* RESET value */
- printk(KERN_DEBUG "Local i960 firmware missing");
+ dev_dbg(&dev->dev, "Local i960 firmware missing\n");
return -ENODEV;
}
return 0;
@@ -827,7 +826,7 @@ static int pci_netmos_9900_numports(struct pci_dev *dev)
if (sub_serports > 0) {
return sub_serports;
} else {
- printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+ dev_err(&dev->dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
return 0;
}
}
@@ -931,7 +930,7 @@ static int pci_ite887x_init(struct pci_dev *dev)
}
if (!inta_addr[i]) {
- printk(KERN_ERR "ite887x: could not find iobase\n");
+ dev_err(&dev->dev, "ite887x: could not find iobase\n");
return -ENODEV;
}
@@ -1024,9 +1023,9 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev)
/* Tornado device */
if (deviceID == 0x07000200) {
number_uarts = ioread8(p + 4);
- printk(KERN_DEBUG
+ dev_dbg(&dev->dev,
"%d ports detected on Oxford PCI Express device\n",
- number_uarts);
+ number_uarts);
}
pci_iounmap(dev, p);
return number_uarts;
@@ -1308,6 +1307,29 @@ static int pci_default_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, board->reg_shift);
}
+static int pci_pericom_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset, maxnr;
+
+ bar = FL_GET_BASE(board->flags);
+ if (board->flags & FL_BASE_BARS)
+ bar += idx;
+ else
+ offset += idx * board->uart_offset;
+
+ maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
+ (board->reg_shift + 3);
+
+ if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
+ return 1;
+
+ port->port.uartclk = 14745600;
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
static int
ce4100_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -1324,6 +1346,120 @@ ce4100_serial_setup(struct serial_private *priv,
return ret;
}
+#define PCI_DEVICE_ID_INTEL_BYT_UART1 0x0f0a
+#define PCI_DEVICE_ID_INTEL_BYT_UART2 0x0f0c
+
+#define BYT_PRV_CLK 0x800
+#define BYT_PRV_CLK_EN (1 << 0)
+#define BYT_PRV_CLK_M_VAL_SHIFT 1
+#define BYT_PRV_CLK_N_VAL_SHIFT 16
+#define BYT_PRV_CLK_UPDATE (1 << 31)
+
+#define BYT_GENERAL_REG 0x808
+#define BYT_GENERAL_DIS_RTS_N_OVERRIDE (1 << 3)
+
+#define BYT_TX_OVF_INT 0x820
+#define BYT_TX_OVF_INT_MASK (1 << 1)
+
+static void
+byt_set_termios(struct uart_port *p, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int baud = tty_termios_baud_rate(termios);
+ unsigned int m = 6912;
+ unsigned int n = 15625;
+ u32 reg;
+
+ /* For baud rates 1M, 2M, 3M and 4M the dividers must be adjusted. */
+ if (baud == 1000000 || baud == 2000000 || baud == 4000000) {
+ m = 64;
+ n = 100;
+
+ p->uartclk = 64000000;
+ } else if (baud == 3000000) {
+ m = 48;
+ n = 100;
+
+ p->uartclk = 48000000;
+ } else {
+ p->uartclk = 44236800;
+ }
+
+ /* Reset the clock */
+ reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
+ writel(reg, p->membase + BYT_PRV_CLK);
+ reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
+ writel(reg, p->membase + BYT_PRV_CLK);
+
+ /*
+ * If auto-handshake mechanism is not enabled,
+ * disable rts_n override
+ */
+ reg = readl(p->membase + BYT_GENERAL_REG);
+ reg &= ~BYT_GENERAL_DIS_RTS_N_OVERRIDE;
+ if (termios->c_cflag & CRTSCTS)
+ reg |= BYT_GENERAL_DIS_RTS_N_OVERRIDE;
+ writel(reg, p->membase + BYT_GENERAL_REG);
+
+ serial8250_do_set_termios(p, termios, old);
+}
+
+static bool byt_dma_filter(struct dma_chan *chan, void *param)
+{
+ return chan->chan_id == *(int *)param;
+}
+
+static int
+byt_serial_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ struct uart_8250_dma *dma;
+ int ret;
+
+ dma = devm_kzalloc(port->port.dev, sizeof(*dma), GFP_KERNEL);
+ if (!dma)
+ return -ENOMEM;
+
+ switch (priv->dev->device) {
+ case PCI_DEVICE_ID_INTEL_BYT_UART1:
+ dma->rx_chan_id = 3;
+ dma->tx_chan_id = 2;
+ break;
+ case PCI_DEVICE_ID_INTEL_BYT_UART2:
+ dma->rx_chan_id = 5;
+ dma->tx_chan_id = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dma->rxconf.slave_id = dma->rx_chan_id;
+ dma->rxconf.src_maxburst = 16;
+
+ dma->txconf.slave_id = dma->tx_chan_id;
+ dma->txconf.dst_maxburst = 16;
+
+ dma->fn = byt_dma_filter;
+ dma->rx_param = &dma->rx_chan_id;
+ dma->tx_param = &dma->tx_chan_id;
+
+ ret = pci_default_setup(priv, board, port, idx);
+ port->port.iotype = UPIO_MEM;
+ port->port.type = PORT_16550A;
+ port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ port->port.set_termios = byt_set_termios;
+ port->port.fifosize = 64;
+ port->tx_loadsz = 64;
+ port->dma = dma;
+ port->capabilities = UART_CAP_FIFO | UART_CAP_AFE;
+
+ /* Disable Tx counter interrupts */
+ writel(BYT_TX_OVF_INT_MASK, port->port.membase + BYT_TX_OVF_INT);
+
+ return ret;
+}
+
static int
pci_omegapci_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -1344,17 +1480,80 @@ pci_brcm_trumanage_setup(struct serial_private *priv,
return ret;
}
+static int pci_fintek_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ struct pci_dev *pdev = priv->dev;
+ unsigned long base;
+ unsigned long iobase;
+ unsigned long ciobase = 0;
+ u8 config_base;
+
+ /*
+ * We are supposed to be able to read these from the PCI config space,
+ * but the values there don't seem to match what we need to use, so
+ * just use these hard-coded values for now, as they are correct.
+ */
+ switch (idx) {
+ case 0: iobase = 0xe000; config_base = 0x40; break;
+ case 1: iobase = 0xe008; config_base = 0x48; break;
+ case 2: iobase = 0xe010; config_base = 0x50; break;
+ case 3: iobase = 0xe018; config_base = 0x58; break;
+ case 4: iobase = 0xe020; config_base = 0x60; break;
+ case 5: iobase = 0xe028; config_base = 0x68; break;
+ case 6: iobase = 0xe030; config_base = 0x70; break;
+ case 7: iobase = 0xe038; config_base = 0x78; break;
+ case 8: iobase = 0xe040; config_base = 0x80; break;
+ case 9: iobase = 0xe048; config_base = 0x88; break;
+ case 10: iobase = 0xe050; config_base = 0x90; break;
+ case 11: iobase = 0xe058; config_base = 0x98; break;
+ default:
+ /* Unknown number of ports, get out of here */
+ return -EINVAL;
+ }
+
+ if (idx < 4) {
+ base = pci_resource_start(priv->dev, 3);
+ ciobase = (int)(base + (0x8 * idx));
+ }
+
+ dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%lx ciobase=0x%lx config_base=0x%2x\n",
+ __func__, idx, iobase, ciobase, config_base);
+
+ /* Enable UART I/O port */
+ pci_write_config_byte(pdev, config_base + 0x00, 0x01);
+
+ /* Select 128-byte FIFO and 8x FIFO threshold */
+ pci_write_config_byte(pdev, config_base + 0x01, 0x33);
+
+ /* LSB UART */
+ pci_write_config_byte(pdev, config_base + 0x04, (u8)(iobase & 0xff));
+
+ /* MSB UART */
+ pci_write_config_byte(pdev, config_base + 0x05, (u8)((iobase & 0xff00) >> 8));
+
+ /* irq number, this usually fails, but the spec says to do it anyway. */
+ pci_write_config_byte(pdev, config_base + 0x06, pdev->irq);
+
+ port->port.iotype = UPIO_PORT;
+ port->port.iobase = iobase;
+ port->port.mapbase = 0;
+ port->port.membase = NULL;
+ port->port.regshift = 0;
+
+ return 0;
+}
+
static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_NO_TXEN_TEST;
- printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
- "[%04x:%04x] subsystem [%04x:%04x]\n",
- priv->dev->vendor,
- priv->dev->device,
- priv->dev->subsystem_vendor,
- priv->dev->subsystem_device);
+ dev_dbg(&priv->dev->dev,
+ "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n",
+ priv->dev->vendor, priv->dev->device,
+ priv->dev->subsystem_vendor, priv->dev->subsystem_device);
return pci_default_setup(priv, board, port, idx);
}
@@ -1662,6 +1861,20 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = kt_serial_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_BYT_UART1,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = byt_serial_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_BYT_UART2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = byt_serial_setup,
+ },
/*
* ITE
*/
@@ -1826,6 +2039,31 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.exit = pci_plx9050_exit,
},
/*
+ * Pericom
+ */
+ {
+ .vendor = 0x12d8,
+ .device = 0x7952,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = 0x12d8,
+ .device = 0x7954,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = 0x12d8,
+ .device = 0x7958,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+
+ /*
* PLX
*/
{
@@ -2255,6 +2493,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = pci_brcm_trumanage_setup,
},
+ {
+ .vendor = 0x1c29,
+ .device = 0x1104,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_fintek_setup,
+ },
+ {
+ .vendor = 0x1c29,
+ .device = 0x1108,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_fintek_setup,
+ },
+ {
+ .vendor = 0x1c29,
+ .device = 0x1112,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_fintek_setup,
+ },
/*
* Default "match everything" terminator entry
@@ -2449,9 +2708,13 @@ enum pci_board_num_t {
pbn_ADDIDATA_PCIe_4_3906250,
pbn_ADDIDATA_PCIe_8_3906250,
pbn_ce4100_1_115200,
+ pbn_byt,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
pbn_brcm_trumanage,
+ pbn_fintek_4,
+ pbn_fintek_8,
+ pbn_fintek_12,
};
/*
@@ -3185,6 +3448,13 @@ static struct pciserial_board pci_boards[] = {
.base_baud = 921600,
.reg_shift = 2,
},
+ [pbn_byt] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 2764800,
+ .uart_offset = 0x80,
+ .reg_shift = 2,
+ },
[pbn_omegapci] = {
.flags = FL_BASE0,
.num_ports = 8,
@@ -3202,6 +3472,24 @@ static struct pciserial_board pci_boards[] = {
.reg_shift = 2,
.base_baud = 115200,
},
+ [pbn_fintek_4] = {
+ .num_ports = 4,
+ .uart_offset = 8,
+ .base_baud = 115200,
+ .first_offset = 0x40,
+ },
+ [pbn_fintek_8] = {
+ .num_ports = 8,
+ .uart_offset = 8,
+ .base_baud = 115200,
+ .first_offset = 0x40,
+ },
+ [pbn_fintek_12] = {
+ .num_ports = 12,
+ .uart_offset = 8,
+ .base_baud = 115200,
+ .first_offset = 0x40,
+ },
};
static const struct pci_device_id blacklist[] = {
@@ -3362,14 +3650,15 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
if (quirk->setup(priv, board, &uart, i))
break;
-#ifdef SERIAL_DEBUG_PCI
- printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n",
- uart.port.iobase, uart.port.irq, uart.port.iotype);
-#endif
+ dev_dbg(&dev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
+ uart.port.iobase, uart.port.irq, uart.port.iotype);
priv->line[i] = serial8250_register_8250_port(&uart);
if (priv->line[i] < 0) {
- printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
+ dev_err(&dev->dev,
+ "Couldn't register serial port %lx, irq %d, type %d, error %d\n",
+ uart.port.iobase, uart.port.irq,
+ uart.port.iotype, priv->line[i]);
break;
}
}
@@ -3462,7 +3751,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
}
if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
- printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
+ dev_err(&dev->dev, "invalid driver_data: %ld\n",
ent->driver_data);
return -EINVAL;
}
@@ -3520,8 +3809,6 @@ static void pciserial_remove_one(struct pci_dev *dev)
{
struct serial_private *priv = pci_get_drvdata(dev);
- pci_set_drvdata(dev, NULL);
-
pciserial_remove_ports(priv);
pci_disable_device(dev);
@@ -3555,7 +3842,7 @@ static int pciserial_resume_one(struct pci_dev *dev)
err = pci_enable_device(dev);
/* FIXME: We cannot simply error out here */
if (err)
- printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n");
+ dev_err(&dev->dev, "Unable to re-enable ports, trying to continue.\n");
pciserial_resume_ports(priv);
}
return 0;
@@ -4848,6 +5135,15 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ce4100_1_115200 },
+ /* Intel BayTrail */
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART1,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+ pbn_byt },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART2,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+ pbn_byt },
/*
* Cronyx Omega PCI
@@ -4918,6 +5214,11 @@ static struct pci_device_id serial_pci_tbl[] = {
0,
0, pbn_exar_XR17V358 },
+ /* Fintek PCI serial cards */
+ { PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
+ { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
+ { PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 },
+
/*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index febd45cd5027..a3817ab8602f 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -709,7 +709,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on HAVE_CLK && (SUPERH || ARCH_SHMOBILE)
+ depends on HAVE_CLK && (SUPERH || ARM || COMPILE_TEST)
select SERIAL_CORE
config SERIAL_SH_SCI_NR_UARTS
@@ -1512,6 +1512,7 @@ config SERIAL_FSL_LPUART_CONSOLE
config SERIAL_ST_ASC
tristate "ST ASC serial port support"
select SERIAL_CORE
+ depends on ARM || COMPILE_TEST
help
This driver is for the on-chip Asychronous Serial Controller on
STMicroelectronics STi SoCs.
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 8b90f0b6dfdf..33bd8606be62 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -728,7 +728,6 @@ static int pl010_probe(struct amba_device *dev, const struct amba_id *id)
amba_set_drvdata(dev, uap);
ret = uart_add_one_port(&amba_reg, &uap->port);
if (ret) {
- amba_set_drvdata(dev, NULL);
amba_ports[i] = NULL;
clk_put(uap->clk);
unmap:
@@ -745,8 +744,6 @@ static int pl010_remove(struct amba_device *dev)
struct uart_amba_port *uap = amba_get_drvdata(dev);
int i;
- amba_set_drvdata(dev, NULL);
-
uart_remove_one_port(&amba_reg, &uap->port);
for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index aaa22867e656..7203864992a5 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2147,7 +2147,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
amba_set_drvdata(dev, uap);
ret = uart_add_one_port(&amba_reg, &uap->port);
if (ret) {
- amba_set_drvdata(dev, NULL);
amba_ports[i] = NULL;
pl011_dma_remove(uap);
}
@@ -2160,8 +2159,6 @@ static int pl011_remove(struct amba_device *dev)
struct uart_amba_port *uap = amba_get_drvdata(dev);
int i;
- amba_set_drvdata(dev, NULL);
-
uart_remove_one_port(&amba_reg, &uap->port);
for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 569872f4c9b8..c9f5c9dcc15c 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -533,7 +533,7 @@ arc_uart_init_one(struct platform_device *pdev, int dev_id)
unsigned long *plat_data;
struct arc_uart_port *uart = &arc_uart_ports[dev_id];
- plat_data = (unsigned long *)dev_get_platdata(&pdev->dev);
+ plat_data = dev_get_platdata(&pdev->dev);
if (!plat_data)
return -ENODEV;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 6b0f75eac8a2..c7d99af46a96 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -99,6 +99,7 @@ static void atmel_stop_rx(struct uart_port *port);
#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
#define UART_GET_IP_NAME(port) __raw_readl((port)->membase + ATMEL_US_NAME)
+#define UART_GET_IP_VERSION(port) __raw_readl((port)->membase + ATMEL_US_VERSION)
/* PDC registers */
#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
@@ -1503,6 +1504,7 @@ static void atmel_get_ip_name(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int name = UART_GET_IP_NAME(port);
+ u32 version;
int usart, uart;
/* usart and uart ascii */
usart = 0x55534152;
@@ -1517,7 +1519,22 @@ static void atmel_get_ip_name(struct uart_port *port)
dev_dbg(port->dev, "This is uart\n");
atmel_port->is_usart = false;
} else {
- dev_err(port->dev, "Not supported ip name, set to uart\n");
+ /* fallback for older SoCs: use version field */
+ version = UART_GET_IP_VERSION(port);
+ switch (version) {
+ case 0x302:
+ case 0x10213:
+ dev_dbg(port->dev, "This version is usart\n");
+ atmel_port->is_usart = true;
+ break;
+ case 0x203:
+ case 0x10202:
+ dev_dbg(port->dev, "This version is uart\n");
+ atmel_port->is_usart = false;
+ break;
+ default:
+ dev_err(port->dev, "Not supported ip name nor version, set to uart\n");
+ }
}
}
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index 87636cc61a21..4f229703328b 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -766,9 +766,8 @@ static int sport_uart_probe(struct platform_device *pdev)
return -ENOMEM;
}
- ret = peripheral_request_list(
- (unsigned short *)dev_get_platdata(&pdev->dev),
- DRV_NAME);
+ ret = peripheral_request_list(dev_get_platdata(&pdev->dev),
+ DRV_NAME);
if (ret) {
dev_err(&pdev->dev,
"Fail to request SPORT peripherals\n");
@@ -844,8 +843,7 @@ static int sport_uart_probe(struct platform_device *pdev)
out_error_unmap:
iounmap(sport->port.membase);
out_error_free_peripherals:
- peripheral_free_list(
- (unsigned short *)dev_get_platdata(&pdev->dev));
+ peripheral_free_list(dev_get_platdata(&pdev->dev));
out_error_free_mem:
kfree(sport);
bfin_sport_uart_ports[pdev->id] = NULL;
@@ -864,8 +862,7 @@ static int sport_uart_remove(struct platform_device *pdev)
if (sport) {
uart_remove_one_port(&sport_uart_reg, &sport->port);
iounmap(sport->port.membase);
- peripheral_free_list(
- (unsigned short *)dev_get_platdata(&pdev->dev));
+ peripheral_free_list(dev_get_platdata(&pdev->dev));
kfree(sport);
bfin_sport_uart_ports[pdev->id] = NULL;
}
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 3c75e8e04028..869ceba2ec57 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -680,7 +680,7 @@ static int bfin_serial_startup(struct uart_port *port)
default:
uart_dma_ch_rx = uart_dma_ch_tx = 0;
break;
- };
+ }
if (uart_dma_ch_rx &&
request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
@@ -726,7 +726,7 @@ static int bfin_serial_startup(struct uart_port *port)
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
if (uart->cts_pin >= 0) {
if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int,
- IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
+ 0, "BFIN_UART_MODEM_STATUS", uart)) {
uart->cts_pin = -1;
dev_info(port->dev, "Unable to attach BlackFin UART Modem Status interrupt.\n");
}
@@ -765,7 +765,7 @@ static void bfin_serial_shutdown(struct uart_port *port)
break;
default:
break;
- };
+ }
#endif
free_irq(uart->rx_irq, uart);
free_irq(uart->tx_irq, uart);
@@ -1240,7 +1240,7 @@ static int bfin_serial_probe(struct platform_device *pdev)
*/
#endif
ret = peripheral_request_list(
- (unsigned short *)dev_get_platdata(&pdev->dev),
+ dev_get_platdata(&pdev->dev),
DRIVER_NAME);
if (ret) {
dev_err(&pdev->dev,
@@ -1358,8 +1358,7 @@ static int bfin_serial_probe(struct platform_device *pdev)
out_error_unmap:
iounmap(uart->port.membase);
out_error_free_peripherals:
- peripheral_free_list(
- (unsigned short *)dev_get_platdata(&pdev->dev));
+ peripheral_free_list(dev_get_platdata(&pdev->dev));
out_error_free_mem:
kfree(uart);
bfin_serial_ports[pdev->id] = NULL;
@@ -1377,8 +1376,7 @@ static int bfin_serial_remove(struct platform_device *pdev)
if (uart) {
uart_remove_one_port(&bfin_serial_reg, &uart->port);
iounmap(uart->port.membase);
- peripheral_free_list(
- (unsigned short *)dev_get_platdata(&pdev->dev));
+ peripheral_free_list(dev_get_platdata(&pdev->dev));
kfree(uart);
bfin_serial_ports[pdev->id] = NULL;
}
@@ -1432,8 +1430,8 @@ static int bfin_earlyprintk_probe(struct platform_device *pdev)
return -ENOENT;
}
- ret = peripheral_request_list(
- (unsigned short *)dev_get_platdata(&pdev->dev), DRIVER_NAME);
+ ret = peripheral_request_list(dev_get_platdata(&pdev->dev),
+ DRIVER_NAME);
if (ret) {
dev_err(&pdev->dev,
"fail to request bfin serial peripherals\n");
@@ -1463,8 +1461,7 @@ static int bfin_earlyprintk_probe(struct platform_device *pdev)
return 0;
out_error_free_peripherals:
- peripheral_free_list(
- (unsigned short *)dev_get_platdata(&pdev->dev));
+ peripheral_free_list(dev_get_platdata(&pdev->dev));
return ret;
}
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 7e4e4088471c..8d0b994357c8 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -459,7 +459,6 @@ static int uart_clps711x_probe(struct platform_device *pdev)
ret = uart_register_driver(&s->uart);
if (ret) {
dev_err(&pdev->dev, "Registering UART driver failed\n");
- devm_clk_put(&pdev->dev, s->uart_clk);
return ret;
}
@@ -487,7 +486,6 @@ static int uart_clps711x_remove(struct platform_device *pdev)
for (i = 0; i < UART_CLPS711X_NR; i++)
uart_remove_one_port(&s->uart, &s->port[i]);
- devm_clk_put(&pdev->dev, s->uart_clk);
uart_unregister_driver(&s->uart);
return 0;
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index af286e6713eb..590390970996 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1008,7 +1008,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
return -ENODEV;
}
- pl_data = (struct ifx_modem_platform_data *)dev_get_platdata(&spi->dev);
+ pl_data = dev_get_platdata(&spi->dev);
if (!pl_data) {
dev_err(&spi->dev, "missing platform data!");
return -ENODEV;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 042aa077b5b3..b2cfdb661947 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -223,8 +223,7 @@ struct imx_port {
struct dma_chan *dma_chan_rx, *dma_chan_tx;
struct scatterlist rx_sgl, tx_sgl[2];
void *rx_buf;
- unsigned int rx_bytes, tx_bytes;
- struct work_struct tsk_dma_rx, tsk_dma_tx;
+ unsigned int tx_bytes;
unsigned int dma_tx_nents;
wait_queue_head_t dma_wait;
};
@@ -505,34 +504,25 @@ static void dma_tx_callback(void *data)
dev_dbg(sport->port.dev, "exit in %s.\n", __func__);
return;
}
-
- schedule_work(&sport->tsk_dma_tx);
}
-static void dma_tx_work(struct work_struct *w)
+static void imx_dma_tx(struct imx_port *sport)
{
- struct imx_port *sport = container_of(w, struct imx_port, tsk_dma_tx);
struct circ_buf *xmit = &sport->port.state->xmit;
struct scatterlist *sgl = sport->tx_sgl;
struct dma_async_tx_descriptor *desc;
struct dma_chan *chan = sport->dma_chan_tx;
struct device *dev = sport->port.dev;
enum dma_status status;
- unsigned long flags;
int ret;
- status = chan->device->device_tx_status(chan, (dma_cookie_t)0, NULL);
+ status = dmaengine_tx_status(chan, (dma_cookie_t)0, NULL);
if (DMA_IN_PROGRESS == status)
return;
- spin_lock_irqsave(&sport->port.lock, flags);
sport->tx_bytes = uart_circ_chars_pending(xmit);
- if (sport->tx_bytes == 0) {
- spin_unlock_irqrestore(&sport->port.lock, flags);
- return;
- }
- if (xmit->tail > xmit->head) {
+ if (xmit->tail > xmit->head && xmit->head > 0) {
sport->dma_tx_nents = 2;
sg_init_table(sgl, 2);
sg_set_buf(sgl, xmit->buf + xmit->tail,
@@ -542,7 +532,6 @@ static void dma_tx_work(struct work_struct *w)
sport->dma_tx_nents = 1;
sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes);
}
- spin_unlock_irqrestore(&sport->port.lock, flags);
ret = dma_map_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
if (ret == 0) {
@@ -609,11 +598,7 @@ static void imx_start_tx(struct uart_port *port)
}
if (sport->dma_is_enabled) {
- /*
- * We may in the interrupt context, so arise a work_struct to
- * do the real job.
- */
- schedule_work(&sport->tsk_dma_tx);
+ imx_dma_tx(sport);
return;
}
@@ -732,6 +717,7 @@ out:
return IRQ_HANDLED;
}
+static int start_rx_dma(struct imx_port *sport);
/*
* If the RXFIFO is filled with some data, and then we
* arise a DMA operation to receive them.
@@ -750,7 +736,7 @@ static void imx_dma_rxint(struct imx_port *sport)
writel(temp, sport->port.membase + UCR1);
/* tell the DMA to receive the data. */
- schedule_work(&sport->tsk_dma_rx);
+ start_rx_dma(sport);
}
}
@@ -795,8 +781,15 @@ static irqreturn_t imx_int(int irq, void *dev_id)
static unsigned int imx_tx_empty(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
+ unsigned int ret;
+
+ ret = (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0;
- return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0;
+ /* If the TX DMA is working, return 0. */
+ if (sport->dma_is_enabled && sport->dma_is_txing)
+ ret = 0;
+
+ return ret;
}
/*
@@ -865,22 +858,6 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
}
#define RX_BUF_SIZE (PAGE_SIZE)
-static int start_rx_dma(struct imx_port *sport);
-static void dma_rx_work(struct work_struct *w)
-{
- struct imx_port *sport = container_of(w, struct imx_port, tsk_dma_rx);
- struct tty_port *port = &sport->port.state->port;
-
- if (sport->rx_bytes) {
- tty_insert_flip_string(port, sport->rx_buf, sport->rx_bytes);
- tty_flip_buffer_push(port);
- sport->rx_bytes = 0;
- }
-
- if (sport->dma_is_rxing)
- start_rx_dma(sport);
-}
-
static void imx_rx_dma_done(struct imx_port *sport)
{
unsigned long temp;
@@ -912,6 +889,7 @@ static void dma_rx_callback(void *data)
struct imx_port *sport = data;
struct dma_chan *chan = sport->dma_chan_rx;
struct scatterlist *sgl = &sport->rx_sgl;
+ struct tty_port *port = &sport->port.state->port;
struct dma_tx_state state;
enum dma_status status;
unsigned int count;
@@ -919,13 +897,15 @@ static void dma_rx_callback(void *data)
/* unmap it first */
dma_unmap_sg(sport->port.dev, sgl, 1, DMA_FROM_DEVICE);
- status = chan->device->device_tx_status(chan, (dma_cookie_t)0, &state);
+ status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
count = RX_BUF_SIZE - state.residue;
dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
if (count) {
- sport->rx_bytes = count;
- schedule_work(&sport->tsk_dma_rx);
+ tty_insert_flip_string(port, sport->rx_buf, count);
+ tty_flip_buffer_push(port);
+
+ start_rx_dma(sport);
} else
imx_rx_dma_done(sport);
}
@@ -1007,7 +987,6 @@ static int imx_uart_dma_init(struct imx_port *sport)
ret = -ENOMEM;
goto err;
}
- sport->rx_bytes = 0;
/* Prepare for TX : */
sport->dma_chan_tx = dma_request_slave_channel(dev, "tx");
@@ -1038,11 +1017,7 @@ err:
static void imx_enable_dma(struct imx_port *sport)
{
unsigned long temp;
- struct tty_port *port = &sport->port.state->port;
- port->low_latency = 1;
- INIT_WORK(&sport->tsk_dma_tx, dma_tx_work);
- INIT_WORK(&sport->tsk_dma_rx, dma_rx_work);
init_waitqueue_head(&sport->dma_wait);
/* set UCR1 */
@@ -1063,7 +1038,6 @@ static void imx_enable_dma(struct imx_port *sport)
static void imx_disable_dma(struct imx_port *sport)
{
unsigned long temp;
- struct tty_port *port = &sport->port.state->port;
/* clear UCR1 */
temp = readl(sport->port.membase + UCR1);
@@ -1081,7 +1055,6 @@ static void imx_disable_dma(struct imx_port *sport)
writel(temp, sport->port.membase + UCR4);
sport->dma_is_enabled = 0;
- port->low_latency = 0;
}
/* half the RX buffer size */
@@ -1303,6 +1276,16 @@ static void imx_shutdown(struct uart_port *port)
clk_disable_unprepare(sport->clk_ipg);
}
+static void imx_flush_buffer(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ if (sport->dma_is_enabled) {
+ sport->tx_bytes = 0;
+ dmaengine_terminate_all(sport->dma_chan_tx);
+ }
+}
+
static void
imx_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
@@ -1539,7 +1522,7 @@ imx_verify_port(struct uart_port *port, struct serial_struct *ser)
ret = -EINVAL;
if (sport->port.uartclk / 16 != ser->baud_base)
ret = -EINVAL;
- if ((void *)sport->port.mapbase != ser->iomem_base)
+ if (sport->port.mapbase != (unsigned long)ser->iomem_base)
ret = -EINVAL;
if (sport->port.iobase != ser->port)
ret = -EINVAL;
@@ -1623,6 +1606,7 @@ static struct uart_ops imx_pops = {
.break_ctl = imx_break_ctl,
.startup = imx_startup,
.shutdown = imx_shutdown,
+ .flush_buffer = imx_flush_buffer,
.set_termios = imx_set_termios,
.type = imx_type,
.release_port = imx_release_port,
diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c
index cb3c81eb0996..1d9420548e16 100644
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -832,7 +832,7 @@ ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag,
up->curregs[5] |= Tx8;
up->parity_mask = 0xff;
break;
- };
+ }
up->curregs[4] &= ~0x0c;
if (cflag & CSTOPB)
up->curregs[4] |= SB2;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index b2e707aa603a..8d71e4047bb3 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -690,7 +690,7 @@ static void max310x_handle_tx(struct uart_port *port)
max310x_port_write(port, MAX310X_THR_REG,
xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- };
+ }
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index d3db042f649e..52c930fac210 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -293,7 +293,7 @@ static void serial_hsu_enable_ms(struct uart_port *port)
serial_out(up, UART_IER, up->ier);
}
-void hsu_dma_tx(struct uart_hsu_port *up)
+static void hsu_dma_tx(struct uart_hsu_port *up)
{
struct circ_buf *xmit = &up->port.state->xmit;
struct hsu_dma_buffer *dbuf = &up->txbuf;
@@ -340,7 +340,8 @@ void hsu_dma_tx(struct uart_hsu_port *up)
}
/* The buffer is already cache coherent */
-void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf)
+static void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc,
+ struct hsu_dma_buffer *dbuf)
{
dbuf->ofs = 0;
@@ -386,7 +387,8 @@ static void serial_hsu_stop_tx(struct uart_port *port)
/* This is always called in spinlock protected mode, so
* modify timeout timer is safe here */
-void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts, unsigned long *flags)
+static void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts,
+ unsigned long *flags)
{
struct hsu_dma_buffer *dbuf = &up->rxbuf;
struct hsu_dma_chan *chan = up->rxc;
@@ -1183,7 +1185,7 @@ static struct console serial_hsu_console = {
#define SERIAL_HSU_CONSOLE NULL
#endif
-struct uart_ops serial_hsu_pops = {
+static struct uart_ops serial_hsu_pops = {
.tx_empty = serial_hsu_tx_empty,
.set_mctrl = serial_hsu_set_mctrl,
.get_mctrl = serial_hsu_get_mctrl,
@@ -1451,7 +1453,6 @@ static void serial_hsu_remove(struct pci_dev *pdev)
uart_remove_one_port(&serial_hsu_reg, &up->port);
}
- pci_set_drvdata(pdev, NULL);
free_irq(pdev->irq, priv);
pci_disable_device(pdev);
}
@@ -1504,4 +1505,4 @@ module_init(hsu_pci_init);
module_exit(hsu_pci_exit);
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:medfield-hsu");
+MODULE_DEVICE_TABLE(pci, pci_ids);
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 5be1df39f9f5..ec06505e3ae6 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1301,7 +1301,6 @@ static struct uart_ops mpc52xx_uart_ops = {
.shutdown = mpc52xx_uart_shutdown,
.set_termios = mpc52xx_uart_set_termios,
/* .pm = mpc52xx_uart_pm, Not supported yet */
-/* .set_wake = mpc52xx_uart_set_wake, Not supported yet */
.type = mpc52xx_uart_type,
.release_port = mpc52xx_uart_release_port,
.request_port = mpc52xx_uart_request_port,
@@ -1766,7 +1765,7 @@ mpc52xx_uart_of_remove(struct platform_device *op)
static int
mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state)
{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(op);
+ struct uart_port *port = platform_get_drvdata(op);
if (port)
uart_suspend_port(&mpc52xx_uart_driver, port);
@@ -1777,7 +1776,7 @@ mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state)
static int
mpc52xx_uart_of_resume(struct platform_device *op)
{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(op);
+ struct uart_port *port = platform_get_drvdata(op);
if (port)
uart_resume_port(&mpc52xx_uart_driver, port);
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
index 8d702677acc5..e30a3ca3cea3 100644
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -2030,7 +2030,7 @@ static void mpsc_drv_get_platform_data(struct mpsc_port_info *pi,
{
struct mpsc_pdata *pdata;
- pdata = (struct mpsc_pdata *)dev_get_platdata(&pd->dev);
+ pdata = dev_get_platdata(&pd->dev);
pi->port.uartclk = pdata->brg_clk_freq;
pi->port.iotype = UPIO_MEM;
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index a67e7081f001..db0448ae59dc 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -43,6 +43,7 @@
#include <linux/kthread.h>
#include <linux/spi/spi.h>
+#include <linux/pm.h>
#include "mrst_max3110.h"
@@ -61,6 +62,7 @@ struct uart_max3110 {
struct task_struct *main_thread;
struct task_struct *read_thread;
struct mutex thread_mutex;
+ struct mutex io_mutex;
u32 baud;
u16 cur_conf;
@@ -90,6 +92,7 @@ static int max3110_write_then_read(struct uart_max3110 *max,
struct spi_transfer x;
int ret;
+ mutex_lock(&max->io_mutex);
spi_message_init(&message);
memset(&x, 0, sizeof x);
x.len = len;
@@ -104,6 +107,7 @@ static int max3110_write_then_read(struct uart_max3110 *max,
/* Do the i/o */
ret = spi_sync(spi, &message);
+ mutex_unlock(&max->io_mutex);
return ret;
}
@@ -491,19 +495,9 @@ static int serial_m3110_startup(struct uart_port *port)
port->state->port.low_latency = 1;
if (max->irq) {
- max->read_thread = NULL;
- ret = request_irq(max->irq, serial_m3110_irq,
- IRQ_TYPE_EDGE_FALLING, "max3110", max);
- if (ret) {
- max->irq = 0;
- pr_err(PR_FMT "unable to allocate IRQ, polling\n");
- } else {
- /* Enable RX IRQ only */
- config |= WC_RXA_IRQ_ENABLE;
- }
- }
-
- if (max->irq == 0) {
+ /* Enable RX IRQ only */
+ config |= WC_RXA_IRQ_ENABLE;
+ } else {
/* If IRQ is disabled, start a read thread for input data */
max->read_thread =
kthread_run(max3110_read_thread, max, "max3110_read");
@@ -517,8 +511,6 @@ static int serial_m3110_startup(struct uart_port *port)
ret = max3110_out(max, config);
if (ret) {
- if (max->irq)
- free_irq(max->irq, max);
if (max->read_thread)
kthread_stop(max->read_thread);
max->read_thread = NULL;
@@ -540,9 +532,6 @@ static void serial_m3110_shutdown(struct uart_port *port)
max->read_thread = NULL;
}
- if (max->irq)
- free_irq(max->irq, max);
-
/* Disable interrupts from this port */
config = WC_TAG | WC_SW_SHDI;
max3110_out(max, config);
@@ -749,7 +738,8 @@ static int serial_m3110_suspend(struct device *dev)
struct spi_device *spi = to_spi_device(dev);
struct uart_max3110 *max = spi_get_drvdata(spi);
- disable_irq(max->irq);
+ if (max->irq > 0)
+ disable_irq(max->irq);
uart_suspend_port(&serial_m3110_reg, &max->port);
max3110_out(max, max->cur_conf | WC_SW_SHDI);
return 0;
@@ -762,7 +752,8 @@ static int serial_m3110_resume(struct device *dev)
max3110_out(max, max->cur_conf);
uart_resume_port(&serial_m3110_reg, &max->port);
- enable_irq(max->irq);
+ if (max->irq > 0)
+ enable_irq(max->irq);
return 0;
}
@@ -803,6 +794,7 @@ static int serial_m3110_probe(struct spi_device *spi)
max->irq = (u16)spi->irq;
mutex_init(&max->thread_mutex);
+ mutex_init(&max->io_mutex);
max->word_7bits = 0;
max->parity = 0;
@@ -840,6 +832,16 @@ static int serial_m3110_probe(struct spi_device *spi)
goto err_kthread;
}
+ if (max->irq) {
+ ret = request_irq(max->irq, serial_m3110_irq,
+ IRQ_TYPE_EDGE_FALLING, "max3110", max);
+ if (ret) {
+ max->irq = 0;
+ dev_warn(&spi->dev,
+ "unable to allocate IRQ, will use polling method\n");
+ }
+ }
+
spi_set_drvdata(spi, max);
pmax = max;
@@ -867,6 +869,9 @@ static int serial_m3110_remove(struct spi_device *dev)
free_page((unsigned long)max->con_xmit.buf);
+ if (max->irq)
+ free_irq(max->irq, max);
+
if (max->main_thread)
kthread_stop(max->main_thread);
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 10e9d70b5c40..d8b6fee77a03 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -39,6 +39,7 @@
#include <asm/cacheflush.h>
#define MXS_AUART_PORTS 5
+#define MXS_AUART_FIFO_SIZE 16
#define AUART_CTRL0 0x00000000
#define AUART_CTRL0_SET 0x00000004
@@ -548,6 +549,9 @@ static int mxs_auart_dma_init(struct mxs_auart_port *s)
s->flags |= MXS_AUART_DMA_ENABLED;
dev_dbg(s->dev, "enabled the DMA support.");
+ /* The DMA buffer is now the FIFO the TTY subsystem can use */
+ s->port.fifosize = UART_XMIT_SIZE;
+
return 0;
err_out:
@@ -741,6 +745,9 @@ static int mxs_auart_startup(struct uart_port *u)
writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
u->membase + AUART_INTR);
+ /* Reset FIFO size (it could have changed if DMA was enabled) */
+ u->fifosize = MXS_AUART_FIFO_SIZE;
+
/*
* Enable fifo so all four bytes of a DMA word are written to
* output (otherwise, only the LSB is written, ie. 1 in 4 bytes)
@@ -1056,7 +1063,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
s->port.membase = ioremap(r->start, resource_size(r));
s->port.ops = &mxs_auart_ops;
s->port.iotype = UPIO_MEM;
- s->port.fifosize = 16;
+ s->port.fifosize = MXS_AUART_FIFO_SIZE;
s->port.uartclk = clk_get_rate(s->clk);
s->port.type = PORT_IMX;
s->port.dev = s->dev = &pdev->dev;
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 816d1a23f9d0..fa511ebab67c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -39,6 +39,7 @@
#include <linux/irq.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
+#include <linux/of_irq.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/platform_data/serial-omap.h>
@@ -134,6 +135,7 @@ struct uart_omap_port {
struct uart_port port;
struct uart_omap_dma uart_dma;
struct device *dev;
+ int wakeirq;
unsigned char ier;
unsigned char lcr;
@@ -175,7 +177,7 @@ struct uart_omap_port {
bool is_suspending;
};
-#define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port)))
+#define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port)))
static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
@@ -214,10 +216,23 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
return pdata->get_context_loss_count(up->dev);
}
+static inline void serial_omap_enable_wakeirq(struct uart_omap_port *up,
+ bool enable)
+{
+ if (!up->wakeirq)
+ return;
+
+ if (enable)
+ enable_irq(up->wakeirq);
+ else
+ disable_irq(up->wakeirq);
+}
+
static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
{
struct omap_uart_port_info *pdata = dev_get_platdata(up->dev);
+ serial_omap_enable_wakeirq(up, enable);
if (!pdata || !pdata->enable_wakeup)
return;
@@ -242,12 +257,12 @@ serial_omap_baud_is_mode16(struct uart_port *port, unsigned int baud)
unsigned int n16 = port->uartclk / (16 * baud);
int baudAbsDiff13 = baud - (port->uartclk / (13 * n13));
int baudAbsDiff16 = baud - (port->uartclk / (16 * n16));
- if(baudAbsDiff13 < 0)
+ if (baudAbsDiff13 < 0)
baudAbsDiff13 = -baudAbsDiff13;
- if(baudAbsDiff16 < 0)
+ if (baudAbsDiff16 < 0)
baudAbsDiff16 = -baudAbsDiff16;
- return (baudAbsDiff13 > baudAbsDiff16);
+ return (baudAbsDiff13 >= baudAbsDiff16);
}
/*
@@ -258,13 +273,13 @@ serial_omap_baud_is_mode16(struct uart_port *port, unsigned int baud)
static unsigned int
serial_omap_get_divisor(struct uart_port *port, unsigned int baud)
{
- unsigned int divisor;
+ unsigned int mode;
if (!serial_omap_baud_is_mode16(port, baud))
- divisor = 13;
+ mode = 13;
else
- divisor = 16;
- return port->uartclk/(baud * divisor);
+ mode = 16;
+ return port->uartclk/(mode * baud);
}
static void serial_omap_enable_ms(struct uart_port *port)
@@ -283,28 +298,40 @@ static void serial_omap_enable_ms(struct uart_port *port)
static void serial_omap_stop_tx(struct uart_port *port)
{
struct uart_omap_port *up = to_uart_omap_port(port);
- struct circ_buf *xmit = &up->port.state->xmit;
int res;
pm_runtime_get_sync(up->dev);
- /* handle rs485 */
+ /* Handle RS-485 */
if (up->rs485.flags & SER_RS485_ENABLED) {
- /* do nothing if current tx not yet completed */
- res = serial_in(up, UART_LSR) & UART_LSR_TEMT;
- if (!res)
- return;
-
- /* if there's no more data to send, turn off rts */
- if (uart_circ_empty(xmit)) {
- /* if rts not already disabled */
+ if (up->scr & OMAP_UART_SCR_TX_EMPTY) {
+ /* THR interrupt is fired when both TX FIFO and TX
+ * shift register are empty. This means there's nothing
+ * left to transmit now, so make sure the THR interrupt
+ * is fired when TX FIFO is below the trigger level,
+ * disable THR interrupts and toggle the RS-485 GPIO
+ * data direction pin if needed.
+ */
+ up->scr &= ~OMAP_UART_SCR_TX_EMPTY;
+ serial_out(up, UART_OMAP_SCR, up->scr);
res = (up->rs485.flags & SER_RS485_RTS_AFTER_SEND) ? 1 : 0;
if (gpio_get_value(up->rts_gpio) != res) {
- if (up->rs485.delay_rts_after_send > 0) {
+ if (up->rs485.delay_rts_after_send > 0)
mdelay(up->rs485.delay_rts_after_send);
- }
gpio_set_value(up->rts_gpio, res);
}
+ } else {
+ /* We're asked to stop, but there's still stuff in the
+ * UART FIFO, so make sure the THR interrupt is fired
+ * when both TX FIFO and TX shift register are empty.
+ * The next THR interrupt (if no transmission is started
+ * in the meantime) will indicate the end of a
+ * transmission. Therefore we _don't_ disable THR
+ * interrupts in this situation.
+ */
+ up->scr |= OMAP_UART_SCR_TX_EMPTY;
+ serial_out(up, UART_OMAP_SCR, up->scr);
+ return;
}
}
@@ -384,15 +411,18 @@ static void serial_omap_start_tx(struct uart_port *port)
pm_runtime_get_sync(up->dev);
- /* handle rs485 */
+ /* Handle RS-485 */
if (up->rs485.flags & SER_RS485_ENABLED) {
+ /* Fire THR interrupts when FIFO is below trigger level */
+ up->scr &= ~OMAP_UART_SCR_TX_EMPTY;
+ serial_out(up, UART_OMAP_SCR, up->scr);
+
/* if rts not already enabled */
res = (up->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0;
if (gpio_get_value(up->rts_gpio) != res) {
gpio_set_value(up->rts_gpio, res);
- if (up->rs485.delay_rts_before_send > 0) {
+ if (up->rs485.delay_rts_before_send > 0)
mdelay(up->rs485.delay_rts_before_send);
- }
}
}
@@ -699,6 +729,20 @@ static int serial_omap_startup(struct uart_port *port)
if (retval)
return retval;
+ /* Optional wake-up IRQ */
+ if (up->wakeirq) {
+ retval = request_irq(up->wakeirq, serial_omap_irq,
+ up->port.irqflags, up->name, up);
+ if (retval) {
+ free_irq(up->port.irq, up);
+ return retval;
+ }
+ disable_irq(up->wakeirq);
+ } else {
+ dev_info(up->port.dev, "no wakeirq for uart%d\n",
+ up->port.line);
+ }
+
dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
pm_runtime_get_sync(up->dev);
@@ -787,6 +831,8 @@ static void serial_omap_shutdown(struct uart_port *port)
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
free_irq(up->port.irq, up);
+ if (up->wakeirq)
+ free_irq(up->wakeirq, up);
}
static void serial_omap_uart_qos_work(struct work_struct *work)
@@ -938,7 +984,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
*/
/* Set receive FIFO threshold to 16 characters and
- * transmit FIFO threshold to 16 spaces
+ * transmit FIFO threshold to 32 spaces
*/
up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK;
up->fcr &= ~OMAP_UART_FCR_TX_FIFO_TRIG_MASK;
@@ -1060,15 +1106,6 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
}
-static int serial_omap_set_wake(struct uart_port *port, unsigned int state)
-{
- struct uart_omap_port *up = to_uart_omap_port(port);
-
- serial_omap_enable_wakeup(up, state);
-
- return 0;
-}
-
static void
serial_omap_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
@@ -1353,6 +1390,15 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
up->ier = mode;
serial_out(up, UART_IER, up->ier);
+ /* If RS-485 is disabled, make sure the THR interrupt is fired when
+ * TX FIFO is below the trigger level.
+ */
+ if (!(up->rs485.flags & SER_RS485_ENABLED) &&
+ (up->scr & OMAP_UART_SCR_TX_EMPTY)) {
+ up->scr &= ~OMAP_UART_SCR_TX_EMPTY;
+ serial_out(up, UART_OMAP_SCR, up->scr);
+ }
+
spin_unlock_irqrestore(&up->port.lock, flags);
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
@@ -1401,7 +1447,6 @@ static struct uart_ops serial_omap_pops = {
.shutdown = serial_omap_shutdown,
.set_termios = serial_omap_set_termios,
.pm = serial_omap_pm,
- .set_wake = serial_omap_set_wake,
.type = serial_omap_type,
.release_port = serial_omap_release_port,
.request_port = serial_omap_request_port,
@@ -1582,11 +1627,23 @@ static int serial_omap_probe(struct platform_device *pdev)
struct uart_omap_port *up;
struct resource *mem, *irq;
struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev);
- int ret;
+ int ret, uartirq = 0, wakeirq = 0;
+ /* The optional wakeirq may be specified in the board dts file */
if (pdev->dev.of_node) {
+ uartirq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ if (!uartirq)
+ return -EPROBE_DEFER;
+ wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1);
omap_up_info = of_get_uart_port_info(&pdev->dev);
pdev->dev.platform_data = omap_up_info;
+ } else {
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return -ENODEV;
+ }
+ uartirq = irq->start;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1595,12 +1652,6 @@ static int serial_omap_probe(struct platform_device *pdev)
return -ENODEV;
}
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq) {
- dev_err(&pdev->dev, "no irq resource?\n");
- return -ENODEV;
- }
-
if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
pdev->dev.driver->name)) {
dev_err(&pdev->dev, "memory region already claimed\n");
@@ -1634,7 +1685,8 @@ static int serial_omap_probe(struct platform_device *pdev)
up->port.dev = &pdev->dev;
up->port.type = PORT_OMAP;
up->port.iotype = UPIO_MEM;
- up->port.irq = irq->start;
+ up->port.irq = uartirq;
+ up->wakeirq = wakeirq;
up->port.regshift = 2;
up->port.fifosize = 64;
@@ -1670,8 +1722,9 @@ static int serial_omap_probe(struct platform_device *pdev)
up->port.uartclk = omap_up_info->uartclk;
if (!up->port.uartclk) {
up->port.uartclk = DEFAULT_CLK_SPEED;
- dev_warn(&pdev->dev, "No clock speed specified: using default:"
- "%d\n", DEFAULT_CLK_SPEED);
+ dev_warn(&pdev->dev,
+ "No clock speed specified: using default: %d\n",
+ DEFAULT_CLK_SPEED);
}
up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 44077c0b7670..0aa2b528ef3d 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1614,7 +1614,6 @@ static struct uart_ops pch_uart_ops = {
.shutdown = pch_uart_shutdown,
.set_termios = pch_uart_set_termios,
/* .pm = pch_uart_pm, Not supported yet */
-/* .set_wake = pch_uart_set_wake, Not supported yet */
.type = pch_uart_type,
.release_port = pch_uart_release_port,
.request_port = pch_uart_request_port,
@@ -1996,6 +1995,8 @@ module_exit(pch_uart_module_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
+MODULE_DEVICE_TABLE(pci, pch_uart_pci_id);
+
module_param(default_baud, uint, S_IRUGO);
MODULE_PARM_DESC(default_baud,
"Default BAUD for initial driver state and console (default 9600)");
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index f87f1a0c8c6e..95917cefe14f 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1072,7 +1072,7 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
uap->curregs[5] |= Tx8;
uap->parity_mask = 0xff;
break;
- };
+ }
uap->curregs[4] &= ~(SB_MASK);
if (cflag & CSTOPB)
uap->curregs[4] |= SB2;
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index ba25722a7131..753d4525b367 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -647,7 +647,10 @@ void sa1100_register_uart_fns(struct sa1100_port_fns *fns)
sa1100_pops.set_mctrl = fns->set_mctrl;
sa1100_pops.pm = fns->pm;
- sa1100_pops.set_wake = fns->set_wake;
+ /*
+ * FIXME: fns->set_wake is unused - this should be called from
+ * the suspend() callback if device_may_wakeup(dev)) is set.
+ */
}
void __init sa1100_register_uart(int idx, int port)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index f3dfa19a1cb8..c1af04d46682 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -407,7 +407,14 @@ static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- /* todo - possibly remove AFC and do manual CTS */
+ unsigned int umcon = rd_regl(port, S3C2410_UMCON);
+
+ if (mctrl & TIOCM_RTS)
+ umcon |= S3C2410_UMCOM_RTS_LOW;
+ else
+ umcon &= ~S3C2410_UMCOM_RTS_LOW;
+
+ wr_regl(port, S3C2410_UMCON, umcon);
}
static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
@@ -774,8 +781,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
if (termios->c_cflag & CSTOPB)
ulcon |= S3C2410_LCON_STOPB;
- umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
-
if (termios->c_cflag & PARENB) {
if (termios->c_cflag & PARODD)
ulcon |= S3C2410_LCON_PODD;
@@ -792,6 +797,15 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
wr_regl(port, S3C2410_ULCON, ulcon);
wr_regl(port, S3C2410_UBRDIV, quot);
+
+ umcon = rd_regl(port, S3C2410_UMCON);
+ if (termios->c_cflag & CRTSCTS) {
+ umcon |= S3C2410_UMCOM_AFC;
+ /* Disable RTS when RX FIFO contains 63 bytes */
+ umcon &= ~S3C2412_UMCON_AFC_8;
+ } else {
+ umcon &= ~S3C2410_UMCOM_AFC;
+ }
wr_regl(port, S3C2410_UMCON, umcon);
if (ourport->info->has_divslot)
@@ -1254,7 +1268,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
ourport->baudclk = ERR_PTR(-EINVAL);
ourport->info = ourport->drv_data->info;
ourport->cfg = (dev_get_platdata(&pdev->dev)) ?
- (struct s3c2410_uartcfg *)dev_get_platdata(&pdev->dev) :
+ dev_get_platdata(&pdev->dev) :
ourport->drv_data->def_cfg;
ourport->port.fifosize = (ourport->info->fifosize) ?
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index aaa617a6c499..8827e5424cef 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -63,7 +63,7 @@ struct s3c24xx_uart_port {
/* conversion functions */
-#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
+#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
/* register access controls */
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index 49e9bbfe6cab..a447f71538ef 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -986,6 +986,7 @@ static int sccnxp_probe(struct platform_device *pdev)
return 0;
}
+ uart_unregister_driver(&s->uart);
err_out:
if (!IS_ERR(s->regulator))
return regulator_disable(s->regulator);
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 0489a2bdcdf9..dfe79ccc4fb3 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1018,7 +1018,7 @@ static int tegra_uart_startup(struct uart_port *u)
goto fail_hw_init;
}
- ret = request_irq(u->irq, tegra_uart_isr, IRQF_DISABLED,
+ ret = request_irq(u->irq, tegra_uart_isr, 0,
dev_name(u->dev), tup);
if (ret < 0) {
dev_err(u->dev, "Failed to register ISR for IRQ %d\n", u->irq);
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 440a962412da..90a080b1f9ee 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -1220,8 +1220,6 @@ static void pciserial_txx9_remove_one(struct pci_dev *dev)
{
struct uart_txx9_port *up = pci_get_drvdata(dev);
- pci_set_drvdata(dev, NULL);
-
if (up) {
serial_txx9_unregister_port(up->port.line);
pci_disable_device(dev);
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 61c1ad03db5b..f186a8fb8887 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -529,7 +529,7 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
while (sirfport->rx_completed != sirfport->rx_issued) {
sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
SIRFSOC_RX_DMA_BUF_SIZE);
- sirfsoc_rx_submit_one_dma_desc(port, sirfport->rx_completed++);
+ sirfport->rx_completed++;
sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
}
count = CIRC_CNT(sirfport->rx_dma_items[sirfport->rx_issued].xmit.head,
@@ -706,12 +706,19 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param)
{
struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
struct uart_port *port = &sirfport->port;
+ struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
+ struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
unsigned long flags;
spin_lock_irqsave(&sirfport->rx_lock, flags);
while (sirfport->rx_completed != sirfport->rx_issued) {
sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
SIRFSOC_RX_DMA_BUF_SIZE);
- sirfsoc_rx_submit_one_dma_desc(port, sirfport->rx_completed++);
+ if (rd_regl(port, ureg->sirfsoc_int_en_reg) &
+ uint_en->sirfsoc_rx_timeout_en)
+ sirfsoc_rx_submit_one_dma_desc(port,
+ sirfport->rx_completed++);
+ else
+ sirfport->rx_completed++;
sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
}
spin_unlock_irqrestore(&sirfport->rx_lock, flags);
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index fb8d0a002607..b7d679c0881b 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -368,15 +368,6 @@ struct sirfsoc_uart_register sirfsoc_uart = {
#define SIRFSOC_UART_NR 6
#define SIRFSOC_PORT_TYPE 0xa5
-/* Baud Rate Calculation */
-#define SIRF_MIN_SAMPLE_DIV 0xf
-#define SIRF_MAX_SAMPLE_DIV 0x3f
-#define SIRF_IOCLK_DIV_MAX 0xffff
-#define SIRF_SAMPLE_DIV_SHIFT 16
-#define SIRF_IOCLK_DIV_MASK 0xffff
-#define SIRF_SAMPLE_DIV_MASK 0x3f0000
-#define SIRF_BAUD_RATE_SUPPORT_NR 18
-
/* Uart Common Use Macro*/
#define SIRFSOC_RX_DMA_BUF_SIZE 256
#define BYTES_TO_ALIGN(dma_addr) ((unsigned long)(dma_addr) & 0x3)
@@ -453,9 +444,6 @@ struct sirfsoc_uart_port {
int rx_issued;
};
-/* Hardware Flow Control */
-#define SIRFUART_AFC_CTRL_RX_THD 0x70
-
/* Register Access Control */
#define portaddr(port, reg) ((port)->membase + (reg))
#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 5d6136b2a04a..380fb5355cb2 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -894,7 +894,7 @@ static int sunsab_console_setup(struct console *con, char *options)
case B115200: baud = 115200; break;
case B230400: baud = 230400; break;
case B460800: baud = 460800; break;
- };
+ }
/*
* Temporary fix.
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 699cc1b5f6aa..db79b76f5c8e 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -522,7 +522,7 @@ static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
serio_interrupt(&up->serio, ch, 0);
#endif
break;
- };
+ }
}
} while (serial_in(up, UART_LSR) & UART_LSR_DR);
}
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 135a15203532..45a8c6aa5837 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -319,7 +319,7 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
serio_interrupt(&up->serio, ch, 0);
#endif
break;
- };
+ }
}
}
@@ -897,7 +897,7 @@ sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
up->curregs[R5] |= Tx8;
up->parity_mask = 0xff;
break;
- };
+ }
up->curregs[R4] &= ~0x0c;
if (cflag & CSTOPB)
up->curregs[R4] |= SB2;
@@ -1239,7 +1239,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
default: case B9600: baud = 9600; break;
case B19200: baud = 19200; break;
case B38400: baud = 38400; break;
- };
+ }
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 88317482b81f..2fd1e1789811 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -269,7 +269,7 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port)
return 1;
bdp++;
- };
+ }
}
/*
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 7e4150aa69c6..e46e9f3f19b9 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1,7 +1,7 @@
/*
* Xilinx PS UART driver
*
- * 2011 (c) Xilinx Inc.
+ * 2011 - 2013 (C) Xilinx Inc.
*
* This program is free software; you can redistribute it
* and/or modify it under the terms of the GNU General Public
@@ -11,13 +11,17 @@
*
*/
+#if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
#include <linux/platform_device.h>
#include <linux/serial.h>
+#include <linux/console.h>
#include <linux/serial_core.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/console.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/io.h>
@@ -29,12 +33,22 @@
#define XUARTPS_MAJOR 0 /* use dynamic node allocation */
#define XUARTPS_MINOR 0 /* works best with devtmpfs */
#define XUARTPS_NR_PORTS 2
-#define XUARTPS_FIFO_SIZE 16 /* FIFO size */
+#define XUARTPS_FIFO_SIZE 64 /* FIFO size */
#define XUARTPS_REGISTER_SPACE 0xFFF
#define xuartps_readl(offset) ioread32(port->membase + offset)
#define xuartps_writel(val, offset) iowrite32(val, port->membase + offset)
+/* Rx Trigger level */
+static int rx_trigger_level = 56;
+module_param(rx_trigger_level, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
+
+/* Rx Timeout */
+static int rx_timeout = 10;
+module_param(rx_timeout, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
+
/********************************Register Map********************************/
/** UART
*
@@ -128,6 +142,9 @@
#define XUARTPS_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */
#define XUARTPS_IXR_MASK 0x00001FFF /* Valid bit mask */
+/* Goes in read_status_mask for break detection as the HW doesn't do it*/
+#define XUARTPS_IXR_BRK 0x80000000
+
/** Channel Status Register
*
* The channel status register (CSR) is provided to enable the control logic
@@ -139,15 +156,27 @@
#define XUARTPS_SR_TXFULL 0x00000010 /* TX FIFO full */
#define XUARTPS_SR_RXTRIG 0x00000001 /* Rx Trigger */
+/* baud dividers min/max values */
+#define XUARTPS_BDIV_MIN 4
+#define XUARTPS_BDIV_MAX 255
+#define XUARTPS_CD_MAX 65535
+
/**
* struct xuartps - device data
- * @refclk Reference clock
- * @aperclk APB clock
+ * @port Pointer to the UART port
+ * @refclk Reference clock
+ * @aperclk APB clock
+ * @baud Current baud rate
+ * @clk_rate_change_nb Notifier block for clock changes
*/
struct xuartps {
+ struct uart_port *port;
struct clk *refclk;
struct clk *aperclk;
+ unsigned int baud;
+ struct notifier_block clk_rate_change_nb;
};
+#define to_xuartps(_nb) container_of(_nb, struct xuartps, clk_rate_change_nb);
/**
* xuartps_isr - Interrupt handler
@@ -171,6 +200,23 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
*/
isrstatus = xuartps_readl(XUARTPS_ISR_OFFSET);
+ /*
+ * There is no hardware break detection, so we interpret framing
+ * error with all-zeros data as a break sequence. Most of the time,
+ * there's another non-zero byte at the end of the sequence.
+ */
+
+ if (isrstatus & XUARTPS_IXR_FRAMING) {
+ while (!(xuartps_readl(XUARTPS_SR_OFFSET) &
+ XUARTPS_SR_RXEMPTY)) {
+ if (!xuartps_readl(XUARTPS_FIFO_OFFSET)) {
+ port->read_status_mask |= XUARTPS_IXR_BRK;
+ isrstatus &= ~XUARTPS_IXR_FRAMING;
+ }
+ }
+ xuartps_writel(XUARTPS_IXR_FRAMING, XUARTPS_ISR_OFFSET);
+ }
+
/* drop byte with parity error if IGNPAR specified */
if (isrstatus & port->ignore_status_mask & XUARTPS_IXR_PARITY)
isrstatus &= ~(XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT);
@@ -184,6 +230,30 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
while ((xuartps_readl(XUARTPS_SR_OFFSET) &
XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) {
data = xuartps_readl(XUARTPS_FIFO_OFFSET);
+
+ /* Non-NULL byte after BREAK is garbage (99%) */
+ if (data && (port->read_status_mask &
+ XUARTPS_IXR_BRK)) {
+ port->read_status_mask &= ~XUARTPS_IXR_BRK;
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ }
+
+ /*
+ * uart_handle_sysrq_char() doesn't work if
+ * spinlocked, for some reason
+ */
+ if (port->sysrq) {
+ spin_unlock(&port->lock);
+ if (uart_handle_sysrq_char(port,
+ (unsigned char)data)) {
+ spin_lock(&port->lock);
+ continue;
+ }
+ spin_lock(&port->lock);
+ }
+
port->icount.rx++;
if (isrstatus & XUARTPS_IXR_PARITY) {
@@ -247,63 +317,196 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
}
/**
- * xuartps_set_baud_rate - Calculate and set the baud rate
- * @port: Handle to the uart port structure
- * @baud: Baud rate to set
- *
+ * xuartps_calc_baud_divs - Calculate baud rate divisors
+ * @clk: UART module input clock
+ * @baud: Desired baud rate
+ * @rbdiv: BDIV value (return value)
+ * @rcd: CD value (return value)
+ * @div8: Value for clk_sel bit in mod (return value)
* Returns baud rate, requested baud when possible, or actual baud when there
- * was too much error
- **/
-static unsigned int xuartps_set_baud_rate(struct uart_port *port,
- unsigned int baud)
+ * was too much error, zero if no valid divisors are found.
+ *
+ * Formula to obtain baud rate is
+ * baud_tx/rx rate = clk/CD * (BDIV + 1)
+ * input_clk = (Uart User Defined Clock or Apb Clock)
+ * depends on UCLKEN in MR Reg
+ * clk = input_clk or input_clk/8;
+ * depends on CLKS in MR reg
+ * CD and BDIV depends on values in
+ * baud rate generate register
+ * baud rate clock divisor register
+ */
+static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
+ u32 *rbdiv, u32 *rcd, int *div8)
{
- unsigned int sel_clk;
- unsigned int calc_baud = 0;
- unsigned int brgr_val, brdiv_val;
+ u32 cd, bdiv;
+ unsigned int calc_baud;
+ unsigned int bestbaud = 0;
unsigned int bauderror;
+ unsigned int besterror = ~0;
- /* Formula to obtain baud rate is
- * baud_tx/rx rate = sel_clk/CD * (BDIV + 1)
- * input_clk = (Uart User Defined Clock or Apb Clock)
- * depends on UCLKEN in MR Reg
- * sel_clk = input_clk or input_clk/8;
- * depends on CLKS in MR reg
- * CD and BDIV depends on values in
- * baud rate generate register
- * baud rate clock divisor register
- */
- sel_clk = port->uartclk;
- if (xuartps_readl(XUARTPS_MR_OFFSET) & XUARTPS_MR_CLKSEL)
- sel_clk = sel_clk / 8;
-
- /* Find the best values for baud generation */
- for (brdiv_val = 4; brdiv_val < 255; brdiv_val++) {
+ if (baud < clk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX)) {
+ *div8 = 1;
+ clk /= 8;
+ } else {
+ *div8 = 0;
+ }
- brgr_val = sel_clk / (baud * (brdiv_val + 1));
- if (brgr_val < 2 || brgr_val > 65535)
+ for (bdiv = XUARTPS_BDIV_MIN; bdiv <= XUARTPS_BDIV_MAX; bdiv++) {
+ cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
+ if (cd < 1 || cd > XUARTPS_CD_MAX)
continue;
- calc_baud = sel_clk / (brgr_val * (brdiv_val + 1));
+ calc_baud = clk / (cd * (bdiv + 1));
if (baud > calc_baud)
bauderror = baud - calc_baud;
else
bauderror = calc_baud - baud;
- /* use the values when percent error is acceptable */
- if (((bauderror * 100) / baud) < 3) {
- calc_baud = baud;
- break;
+ if (besterror > bauderror) {
+ *rbdiv = bdiv;
+ *rcd = cd;
+ bestbaud = calc_baud;
+ besterror = bauderror;
}
}
+ /* use the values when percent error is acceptable */
+ if (((besterror * 100) / baud) < 3)
+ bestbaud = baud;
+
+ return bestbaud;
+}
- /* Set the values for the new baud rate */
- xuartps_writel(brgr_val, XUARTPS_BAUDGEN_OFFSET);
- xuartps_writel(brdiv_val, XUARTPS_BAUDDIV_OFFSET);
+/**
+ * xuartps_set_baud_rate - Calculate and set the baud rate
+ * @port: Handle to the uart port structure
+ * @baud: Baud rate to set
+ * Returns baud rate, requested baud when possible, or actual baud when there
+ * was too much error, zero if no valid divisors are found.
+ */
+static unsigned int xuartps_set_baud_rate(struct uart_port *port,
+ unsigned int baud)
+{
+ unsigned int calc_baud;
+ u32 cd = 0, bdiv = 0;
+ u32 mreg;
+ int div8;
+ struct xuartps *xuartps = port->private_data;
+
+ calc_baud = xuartps_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
+ &div8);
+
+ /* Write new divisors to hardware */
+ mreg = xuartps_readl(XUARTPS_MR_OFFSET);
+ if (div8)
+ mreg |= XUARTPS_MR_CLKSEL;
+ else
+ mreg &= ~XUARTPS_MR_CLKSEL;
+ xuartps_writel(mreg, XUARTPS_MR_OFFSET);
+ xuartps_writel(cd, XUARTPS_BAUDGEN_OFFSET);
+ xuartps_writel(bdiv, XUARTPS_BAUDDIV_OFFSET);
+ xuartps->baud = baud;
return calc_baud;
}
+#ifdef CONFIG_COMMON_CLK
+/**
+ * xuartps_clk_notitifer_cb - Clock notifier callback
+ * @nb: Notifier block
+ * @event: Notify event
+ * @data: Notifier data
+ * Returns NOTIFY_OK on success, NOTIFY_BAD on error.
+ */
+static int xuartps_clk_notifier_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ u32 ctrl_reg;
+ struct uart_port *port;
+ int locked = 0;
+ struct clk_notifier_data *ndata = data;
+ unsigned long flags = 0;
+ struct xuartps *xuartps = to_xuartps(nb);
+
+ port = xuartps->port;
+ if (port->suspended)
+ return NOTIFY_OK;
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ {
+ u32 bdiv;
+ u32 cd;
+ int div8;
+
+ /*
+ * Find out if current baud-rate can be achieved with new clock
+ * frequency.
+ */
+ if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud,
+ &bdiv, &cd, &div8))
+ return NOTIFY_BAD;
+
+ spin_lock_irqsave(&xuartps->port->lock, flags);
+
+ /* Disable the TX and RX to set baud rate */
+ xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
+ (XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
+ XUARTPS_CR_OFFSET);
+
+ spin_unlock_irqrestore(&xuartps->port->lock, flags);
+
+ return NOTIFY_OK;
+ }
+ case POST_RATE_CHANGE:
+ /*
+ * Set clk dividers to generate correct baud with new clock
+ * frequency.
+ */
+
+ spin_lock_irqsave(&xuartps->port->lock, flags);
+
+ locked = 1;
+ port->uartclk = ndata->new_rate;
+
+ xuartps->baud = xuartps_set_baud_rate(xuartps->port,
+ xuartps->baud);
+ /* fall through */
+ case ABORT_RATE_CHANGE:
+ if (!locked)
+ spin_lock_irqsave(&xuartps->port->lock, flags);
+
+ /* Set TX/RX Reset */
+ xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
+ (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
+ XUARTPS_CR_OFFSET);
+
+ while (xuartps_readl(XUARTPS_CR_OFFSET) &
+ (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
+ cpu_relax();
+
+ /*
+ * Clear the RX disable and TX disable bits and then set the TX
+ * enable bit and RX enable bit to enable the transmitter and
+ * receiver.
+ */
+ xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+ ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
+ xuartps_writel(
+ (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
+ (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
+ XUARTPS_CR_OFFSET);
+
+ spin_unlock_irqrestore(&xuartps->port->lock, flags);
+
+ return NOTIFY_OK;
+ default:
+ return NOTIFY_DONE;
+ }
+}
+#endif
+
/*----------------------Uart Operations---------------------------*/
/**
@@ -346,7 +549,7 @@ static void xuartps_start_tx(struct uart_port *port)
port->state->xmit.tail = (port->state->xmit.tail + 1) &
(UART_XMIT_SIZE - 1);
}
-
+ xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_ISR_OFFSET);
/* Enable the TX Empty interrupt */
xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_IER_OFFSET);
@@ -437,7 +640,7 @@ static void xuartps_set_termios(struct uart_port *port,
struct ktermios *termios, struct ktermios *old)
{
unsigned int cval = 0;
- unsigned int baud;
+ unsigned int baud, minbaud, maxbaud;
unsigned long flags;
unsigned int ctrl_reg, mode_reg;
@@ -454,8 +657,14 @@ static void xuartps_set_termios(struct uart_port *port,
(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
XUARTPS_CR_OFFSET);
- /* Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk */
- baud = uart_get_baud_rate(port, termios, old, 0, 10000000);
+ /*
+ * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
+ * min and max baud should be calculated here based on port->uartclk.
+ * this way we get a valid baud and can safely call set_baud()
+ */
+ minbaud = port->uartclk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX * 8);
+ maxbaud = port->uartclk / (XUARTPS_BDIV_MIN + 1);
+ baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
baud = xuartps_set_baud_rate(port, baud);
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
@@ -480,7 +689,7 @@ static void xuartps_set_termios(struct uart_port *port,
| (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
XUARTPS_CR_OFFSET);
- xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
+ xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
port->read_status_mask = XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_RXTRIG |
XUARTPS_IXR_OVERRUN | XUARTPS_IXR_TOUT;
@@ -531,13 +740,17 @@ static void xuartps_set_termios(struct uart_port *port,
cval |= XUARTPS_MR_PARITY_MARK;
else
cval |= XUARTPS_MR_PARITY_SPACE;
- } else if (termios->c_cflag & PARODD)
+ } else {
+ if (termios->c_cflag & PARODD)
cval |= XUARTPS_MR_PARITY_ODD;
else
cval |= XUARTPS_MR_PARITY_EVEN;
- } else
+ }
+ } else {
cval |= XUARTPS_MR_PARITY_NONE;
- xuartps_writel(cval , XUARTPS_MR_OFFSET);
+ }
+ cval |= mode_reg & 1;
+ xuartps_writel(cval, XUARTPS_MR_OFFSET);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -583,11 +796,17 @@ static int xuartps_startup(struct uart_port *port)
| XUARTPS_MR_PARITY_NONE | XUARTPS_MR_CHARLEN_8_BIT,
XUARTPS_MR_OFFSET);
- /* Set the RX FIFO Trigger level to 14 assuming FIFO size as 16 */
- xuartps_writel(14, XUARTPS_RXWM_OFFSET);
+ /*
+ * Set the RX FIFO Trigger level to use most of the FIFO, but it
+ * can be tuned with a module parameter
+ */
+ xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
- /* Receive Timeout register is enabled with value of 10 */
- xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
+ /*
+ * Receive Timeout register is enabled but it
+ * can be tuned with a module parameter
+ */
+ xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
/* Clear out any pending interrupts before enabling them */
xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
@@ -727,6 +946,54 @@ static void xuartps_enable_ms(struct uart_port *port)
/* N/A */
}
+#ifdef CONFIG_CONSOLE_POLL
+static int xuartps_poll_get_char(struct uart_port *port)
+{
+ u32 imr;
+ int c;
+
+ /* Disable all interrupts */
+ imr = xuartps_readl(XUARTPS_IMR_OFFSET);
+ xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+
+ /* Check if FIFO is empty */
+ if (xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY)
+ c = NO_POLL_CHAR;
+ else /* Read a character */
+ c = (unsigned char) xuartps_readl(XUARTPS_FIFO_OFFSET);
+
+ /* Enable interrupts */
+ xuartps_writel(imr, XUARTPS_IER_OFFSET);
+
+ return c;
+}
+
+static void xuartps_poll_put_char(struct uart_port *port, unsigned char c)
+{
+ u32 imr;
+
+ /* Disable all interrupts */
+ imr = xuartps_readl(XUARTPS_IMR_OFFSET);
+ xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+
+ /* Wait until FIFO is empty */
+ while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
+ cpu_relax();
+
+ /* Write a character */
+ xuartps_writel(c, XUARTPS_FIFO_OFFSET);
+
+ /* Wait until FIFO is empty */
+ while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
+ cpu_relax();
+
+ /* Enable interrupts */
+ xuartps_writel(imr, XUARTPS_IER_OFFSET);
+
+ return;
+}
+#endif
+
/** The UART operations structure
*/
static struct uart_ops xuartps_ops = {
@@ -759,6 +1026,10 @@ static struct uart_ops xuartps_ops = {
.config_port = xuartps_config_port, /* Configure when driver
* adds a xuartps port
*/
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = xuartps_poll_get_char,
+ .poll_put_char = xuartps_poll_put_char,
+#endif
};
static struct uart_port xuartps_port[2];
@@ -837,7 +1108,7 @@ static void xuartps_console_write(struct console *co, const char *s,
{
struct uart_port *port = &xuartps_port[co->index];
unsigned long flags;
- unsigned int imr;
+ unsigned int imr, ctrl;
int locked = 1;
if (oops_in_progress)
@@ -849,9 +1120,19 @@ static void xuartps_console_write(struct console *co, const char *s,
imr = xuartps_readl(XUARTPS_IMR_OFFSET);
xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+ /*
+ * Make sure that the tx part is enabled. Set the TX enable bit and
+ * clear the TX disable bit to enable the transmitter.
+ */
+ ctrl = xuartps_readl(XUARTPS_CR_OFFSET);
+ xuartps_writel((ctrl & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN,
+ XUARTPS_CR_OFFSET);
+
uart_console_write(port, s, count, xuartps_console_putchar);
xuartps_console_wait_tx(port);
+ xuartps_writel(ctrl, XUARTPS_CR_OFFSET);
+
/* restore interrupt state, it seems like there may be a h/w bug
* in that the interrupt enable register should not need to be
* written based on the data sheet
@@ -933,6 +1214,119 @@ static struct uart_driver xuartps_uart_driver = {
#endif
};
+#ifdef CONFIG_PM_SLEEP
+/**
+ * xuartps_suspend - suspend event
+ * @device: Pointer to the device structure
+ *
+ * Returns 0
+ */
+static int xuartps_suspend(struct device *device)
+{
+ struct uart_port *port = dev_get_drvdata(device);
+ struct tty_struct *tty;
+ struct device *tty_dev;
+ int may_wake = 0;
+
+ /* Get the tty which could be NULL so don't assume it's valid */
+ tty = tty_port_tty_get(&port->state->port);
+ if (tty) {
+ tty_dev = tty->dev;
+ may_wake = device_may_wakeup(tty_dev);
+ tty_kref_put(tty);
+ }
+
+ /*
+ * Call the API provided in serial_core.c file which handles
+ * the suspend.
+ */
+ uart_suspend_port(&xuartps_uart_driver, port);
+ if (console_suspend_enabled && !may_wake) {
+ struct xuartps *xuartps = port->private_data;
+
+ clk_disable(xuartps->refclk);
+ clk_disable(xuartps->aperclk);
+ } else {
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+ /* Empty the receive FIFO 1st before making changes */
+ while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY))
+ xuartps_readl(XUARTPS_FIFO_OFFSET);
+ /* set RX trigger level to 1 */
+ xuartps_writel(1, XUARTPS_RXWM_OFFSET);
+ /* disable RX timeout interrups */
+ xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IDR_OFFSET);
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
+
+ return 0;
+}
+
+/**
+ * xuartps_resume - Resume after a previous suspend
+ * @device: Pointer to the device structure
+ *
+ * Returns 0
+ */
+static int xuartps_resume(struct device *device)
+{
+ struct uart_port *port = dev_get_drvdata(device);
+ unsigned long flags = 0;
+ u32 ctrl_reg;
+ struct tty_struct *tty;
+ struct device *tty_dev;
+ int may_wake = 0;
+
+ /* Get the tty which could be NULL so don't assume it's valid */
+ tty = tty_port_tty_get(&port->state->port);
+ if (tty) {
+ tty_dev = tty->dev;
+ may_wake = device_may_wakeup(tty_dev);
+ tty_kref_put(tty);
+ }
+
+ if (console_suspend_enabled && !may_wake) {
+ struct xuartps *xuartps = port->private_data;
+
+ clk_enable(xuartps->aperclk);
+ clk_enable(xuartps->refclk);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Set TX/RX Reset */
+ xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
+ (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
+ XUARTPS_CR_OFFSET);
+ while (xuartps_readl(XUARTPS_CR_OFFSET) &
+ (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
+ cpu_relax();
+
+ /* restore rx timeout value */
+ xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+ /* Enable Tx/Rx */
+ ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
+ xuartps_writel(
+ (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
+ (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
+ XUARTPS_CR_OFFSET);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ } else {
+ spin_lock_irqsave(&port->lock, flags);
+ /* restore original rx trigger level */
+ xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
+ /* enable RX timeout interrupt */
+ xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET);
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
+
+ return uart_resume_port(&xuartps_uart_driver, port);
+}
+#endif /* ! CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume);
+
/* ---------------------------------------------------------------------
* Platform bus binding
*/
@@ -949,27 +1343,26 @@ static int xuartps_probe(struct platform_device *pdev)
struct resource *res, *res2;
struct xuartps *xuartps_data;
- xuartps_data = kzalloc(sizeof(*xuartps_data), GFP_KERNEL);
+ xuartps_data = devm_kzalloc(&pdev->dev, sizeof(*xuartps_data),
+ GFP_KERNEL);
if (!xuartps_data)
return -ENOMEM;
- xuartps_data->aperclk = clk_get(&pdev->dev, "aper_clk");
+ xuartps_data->aperclk = devm_clk_get(&pdev->dev, "aper_clk");
if (IS_ERR(xuartps_data->aperclk)) {
dev_err(&pdev->dev, "aper_clk clock not found.\n");
- rc = PTR_ERR(xuartps_data->aperclk);
- goto err_out_free;
+ return PTR_ERR(xuartps_data->aperclk);
}
- xuartps_data->refclk = clk_get(&pdev->dev, "ref_clk");
+ xuartps_data->refclk = devm_clk_get(&pdev->dev, "ref_clk");
if (IS_ERR(xuartps_data->refclk)) {
dev_err(&pdev->dev, "ref_clk clock not found.\n");
- rc = PTR_ERR(xuartps_data->refclk);
- goto err_out_clk_put_aper;
+ return PTR_ERR(xuartps_data->refclk);
}
rc = clk_prepare_enable(xuartps_data->aperclk);
if (rc) {
dev_err(&pdev->dev, "Unable to enable APER clock.\n");
- goto err_out_clk_put;
+ return rc;
}
rc = clk_prepare_enable(xuartps_data->refclk);
if (rc) {
@@ -989,13 +1382,21 @@ static int xuartps_probe(struct platform_device *pdev)
goto err_out_clk_disable;
}
+#ifdef CONFIG_COMMON_CLK
+ xuartps_data->clk_rate_change_nb.notifier_call =
+ xuartps_clk_notifier_cb;
+ if (clk_notifier_register(xuartps_data->refclk,
+ &xuartps_data->clk_rate_change_nb))
+ dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
+#endif
+
/* Initialize the port structure */
port = xuartps_get_port();
if (!port) {
dev_err(&pdev->dev, "Cannot get uart_port structure\n");
rc = -ENODEV;
- goto err_out_clk_disable;
+ goto err_out_notif_unreg;
} else {
/* Register the port.
* This function also registers this device with the tty layer
@@ -1006,26 +1407,26 @@ static int xuartps_probe(struct platform_device *pdev)
port->dev = &pdev->dev;
port->uartclk = clk_get_rate(xuartps_data->refclk);
port->private_data = xuartps_data;
+ xuartps_data->port = port;
platform_set_drvdata(pdev, port);
rc = uart_add_one_port(&xuartps_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
"uart_add_one_port() failed; err=%i\n", rc);
- goto err_out_clk_disable;
+ goto err_out_notif_unreg;
}
return 0;
}
+err_out_notif_unreg:
+#ifdef CONFIG_COMMON_CLK
+ clk_notifier_unregister(xuartps_data->refclk,
+ &xuartps_data->clk_rate_change_nb);
+#endif
err_out_clk_disable:
clk_disable_unprepare(xuartps_data->refclk);
err_out_clk_dis_aper:
clk_disable_unprepare(xuartps_data->aperclk);
-err_out_clk_put:
- clk_put(xuartps_data->refclk);
-err_out_clk_put_aper:
- clk_put(xuartps_data->aperclk);
-err_out_free:
- kfree(xuartps_data);
return rc;
}
@@ -1043,13 +1444,14 @@ static int xuartps_remove(struct platform_device *pdev)
int rc;
/* Remove the xuartps port from the serial core */
+#ifdef CONFIG_COMMON_CLK
+ clk_notifier_unregister(xuartps_data->refclk,
+ &xuartps_data->clk_rate_change_nb);
+#endif
rc = uart_remove_one_port(&xuartps_uart_driver, port);
port->mapbase = 0;
clk_disable_unprepare(xuartps_data->refclk);
clk_disable_unprepare(xuartps_data->aperclk);
- clk_put(xuartps_data->refclk);
- clk_put(xuartps_data->aperclk);
- kfree(xuartps_data);
return rc;
}
@@ -1067,6 +1469,7 @@ static struct platform_driver xuartps_platform_driver = {
.owner = THIS_MODULE,
.name = XUARTPS_NAME, /* Driver name */
.of_match_table = xuartps_of_match,
+ .pm = &xuartps_dev_pm_ops,
},
};
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 40a9fe9d3b10..ce396ecdf412 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -51,7 +51,7 @@
#include <asm/irq_regs.h>
/* Whether we react on sysrq keys or just ignore them */
-static int __read_mostly sysrq_enabled = SYSRQ_DEFAULT_ENABLE;
+static int __read_mostly sysrq_enabled = CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE;
static bool __read_mostly sysrq_always_enabled;
unsigned short platform_sysrq_reset_seq[] __weak = { KEY_RESERVED };
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index f597e88a705d..c94d2349dd06 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -140,6 +140,10 @@ EXPORT_SYMBOL(tty_port_destroy);
static void tty_port_destructor(struct kref *kref)
{
struct tty_port *port = container_of(kref, struct tty_port, kref);
+
+ /* check if last port ref was dropped before tty release */
+ if (WARN_ON(port->itty))
+ return;
if (port->xmit_buf)
free_page((unsigned long)port->xmit_buf);
tty_port_destroy(port);
@@ -480,8 +484,6 @@ int tty_port_close_start(struct tty_port *port,
if (port->count) {
spin_unlock_irqrestore(&port->lock, flags);
- if (port->ops->drop)
- port->ops->drop(port);
return 0;
}
set_bit(ASYNCB_CLOSING, &port->flags);
@@ -500,9 +502,7 @@ int tty_port_close_start(struct tty_port *port,
/* Flush the ldisc buffering */
tty_ldisc_flush(tty);
- /* Don't call port->drop for the last reference. Callers will want
- to drop the last active reference in ->shutdown() or the tty
- shutdown path */
+ /* Report to caller this is the last port reference */
return 1;
}
EXPORT_SYMBOL(tty_port_close_start);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 9a8e8c5a0c73..61b1137d7e56 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1300,21 +1300,30 @@ static void csi_m(struct vc_data *vc)
case 27:
vc->vc_reverse = 0;
break;
- case 38: /* ANSI X3.64-1979 (SCO-ish?)
- * Enables underscore, white foreground
- * with white underscore (Linux - use
- * default foreground).
+ case 38:
+ case 48: /* ITU T.416
+ * Higher colour modes.
+ * They break the usual properties of SGR codes
+ * and thus need to be detected and ignored by
+ * hand. Strictly speaking, that standard also
+ * wants : rather than ; as separators, contrary
+ * to ECMA-48, but no one produces such codes
+ * and almost no one accepts them.
*/
- vc->vc_color = (vc->vc_def_color & 0x0f) | (vc->vc_color & 0xf0);
- vc->vc_underline = 1;
+ i++;
+ if (i > vc->vc_npar)
+ break;
+ if (vc->vc_par[i] == 5) /* 256 colours */
+ i++; /* ubiquitous */
+ else if (vc->vc_par[i] == 2) /* 24 bit colours */
+ i += 3; /* extremely rare */
+ /* Subcommands 3 (CMY) and 4 (CMYK) are so insane
+ * that detecting them is not worth the few extra
+ * bytes of kernel's size.
+ */
break;
- case 39: /* ANSI X3.64-1979 (SCO-ish?)
- * Disable underline option.
- * Reset colour to default? It did this
- * before...
- */
+ case 39:
vc->vc_color = (vc->vc_def_color & 0x0f) | (vc->vc_color & 0xf0);
- vc->vc_underline = 0;
break;
case 49:
vc->vc_color = (vc->vc_def_color & 0xf0) | (vc->vc_color & 0x0f);