Merge tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk updates from Petr Mladek:

 - Add NMI-safe SRCU reader API. It uses atomic_inc() instead of
   this_cpu_inc() on strong load-store architectures.

 - Introduce new console_list_lock to synchronize a manipulation of the
   list of registered consoles and their flags.

   This is a first step in removing the big-kernel-lock-like behavior of
   console_lock(). This semaphore still serializes console->write()
   calbacks against:

      - each other. It primary prevents potential races between early
        and proper console drivers using the same device.

      - suspend()/resume() callbacks and init() operations in some
        drivers.

      - various other operations in the tty/vt and framebufer
        susbsystems. It is likely that console_lock() serializes even
        operations that are not directly conflicting with the
        console->write() callbacks here. This is the most complicated
        big-kernel-lock aspect of the console_lock() that will be hard
        to untangle.

 - Introduce new console_srcu lock that is used to safely iterate and
   access the registered console drivers under SRCU read lock.

   This is a prerequisite for introducing atomic console drivers and
   console kthreads. It will reduce the complexity of serialization
   against normal consoles and console_lock(). Also it should remove the
   risk of deadlock during critical situations, like Oops or panic, when
   only atomic consoles are registered.

 - Check whether the console is registered instead of enabled on many
   locations. It was a historical leftover.

 - Cleanly force a preferred console in xenfb code instead of a dirty
   hack.

 - A lot of code and comment clean ups and improvements.

* tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (47 commits)
  printk: htmldocs: add missing description
  tty: serial: sh-sci: use setup() callback for early console
  printk: relieve console_lock of list synchronization duties
  tty: serial: kgdboc: use console_list_lock to trap exit
  tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()
  tty: serial: kgdboc: use console_list_lock for list traversal
  tty: serial: kgdboc: use srcu console list iterator
  proc: consoles: use console_list_lock for list iteration
  tty: tty_io: use console_list_lock for list synchronization
  printk, xen: fbfront: create/use safe function for forcing preferred
  netconsole: avoid CON_ENABLED misuse to track registration
  usb: early: xhci-dbc: use console_is_registered()
  tty: serial: xilinx_uartps: use console_is_registered()
  tty: serial: samsung_tty: use console_is_registered()
  tty: serial: pic32_uart: use console_is_registered()
  tty: serial: earlycon: use console_is_registered()
  tty: hvc: use console_is_registered()
  efi: earlycon: use console_is_registered()
  tty: nfcon: use console_is_registered()
  serial_core: replace uart_console_enabled() with uart_console_registered()
  ...

8 files changed, 71 insertions, 23 deletions

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 94fbf0add2ce..74568292186f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -565,7 +565,7 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 
 		up->port.dev = dev;
 
-		if (uart_console_enabled(&up->port))
+		if (uart_console_registered(&up->port))
 			pm_runtime_get_sync(up->port.dev);
 
 		serial8250_apply_quirks(up);
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index a5f380584cda..4f6e9bf57169 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -181,7 +181,7 @@ int __init setup_earlycon(char *buf)
 	if (!buf || !buf[0])
 		return -EINVAL;
 
-	if (early_con.flags & CON_ENABLED)
+	if (console_is_registered(&early_con))
 		return -EALREADY;
 
 again:
@@ -253,7 +253,7 @@ int __init of_setup_earlycon(const struct earlycon_id *match,
 	bool big_endian;
 	u64 addr;
 
-	if (early_con.flags & CON_ENABLED)
+	if (console_is_registered(&early_con))
 		return -EALREADY;
 
 	spin_lock_init(&port->lock);
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 7aa37be3216a..a3ed9b34e2ab 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -189,9 +189,27 @@ static int configure_kgdboc(void)
 	if (kgdboc_register_kbd(&cptr))
 		goto do_register;
 
+	/*
+	 * tty_find_polling_driver() can call uart_set_options()
+	 * (via poll_init) to configure the uart. Take the console_list_lock
+	 * in order to synchronize against register_console(), which can also
+	 * configure the uart via uart_set_options(). This also allows safe
+	 * traversal of the console list.
+	 */
+	console_list_lock();
+
 	p = tty_find_polling_driver(cptr, &tty_line);
-	if (!p)
+	if (!p) {
+		console_list_unlock();
 		goto noconfig;
+	}
+
+	/*
+	 * Take console_lock to serialize device() callback with
+	 * other console operations. For example, fg_console is
+	 * modified under console_lock when switching vt.
+	 */
+	console_lock();
 
 	for_each_console(cons) {
 		int idx;
@@ -202,6 +220,10 @@ static int configure_kgdboc(void)
 		}
 	}
 
+	console_unlock();
+
+	console_list_unlock();
+
 	kgdb_tty_driver = p;
 	kgdb_tty_line = tty_line;
 
@@ -449,6 +471,7 @@ static void kgdboc_earlycon_pre_exp_handler(void)
 {
 	struct console *con;
 	static bool already_warned;
+	int cookie;
 
 	if (already_warned)
 		return;
@@ -461,9 +484,14 @@ static void kgdboc_earlycon_pre_exp_handler(void)
 	 * serial drivers might be OK with this, print a warning once per
 	 * boot if we detect this case.
 	 */
-	for_each_console(con)
+	cookie = console_srcu_read_lock();
+	for_each_console_srcu(con) {
 		if (con == kgdboc_earlycon_io_ops.cons)
-			return;
+			break;
+	}
+	console_srcu_read_unlock(cookie);
+	if (con)
+		return;
 
 	already_warned = true;
 	pr_warn("kgdboc_earlycon is still using bootconsole\n");
@@ -528,7 +556,15 @@ static int __init kgdboc_earlycon_init(char *opt)
 	 * Look for a matching console, or if the name was left blank just
 	 * pick the first one we find.
 	 */
-	console_lock();
+
+	/*
+	 * Hold the console_list_lock to guarantee that no consoles are
+	 * unregistered until the kgdboc_earlycon setup is complete.
+	 * Trapping the exit() callback relies on exit() not being
+	 * called until the trap is setup. This also allows safe
+	 * traversal of the console list and race-free reading of @flags.
+	 */
+	console_list_lock();
 	for_each_console(con) {
 		if (con->write && con->read &&
 		    (con->flags & (CON_BOOT | CON_ENABLED)) &&
@@ -570,7 +606,7 @@ static int __init kgdboc_earlycon_init(char *opt)
 	}
 
 unlock:
-	console_unlock();
+	console_list_unlock();
 
 	/* Non-zero means malformed option so we always return zero */
 	return 0;
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index 2beada66c824..c38754d593ca 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -843,7 +843,7 @@ console_initcall(pic32_console_init);
  */
 static int __init pic32_late_console_init(void)
 {
-	if (!(pic32_console.flags & CON_ENABLED))
+	if (!console_is_registered(&pic32_console))
 		register_console(&pic32_console);
 
 	return 0;
@@ -919,7 +919,7 @@ static int pic32_uart_probe(struct platform_device *pdev)
 	}
 
 #ifdef CONFIG_SERIAL_PIC32_CONSOLE
-	if (uart_console_enabled(port)) {
+	if (uart_console_registered(port)) {
 		/* The peripheral clock has been enabled by console_setup,
 		 * so disable it till the port is used.
 		 */
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 77d1363029f5..9c252c9ca95a 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -1732,7 +1732,7 @@ static void __init s3c24xx_serial_register_console(void)
 
 static void s3c24xx_serial_unregister_console(void)
 {
-	if (s3c24xx_serial_console.flags & CON_ENABLED)
+	if (console_is_registered(&s3c24xx_serial_console))
 		unregister_console(&s3c24xx_serial_console);
 }
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 179ee199df34..b9fbbee598b8 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2223,11 +2223,11 @@ uart_set_options(struct uart_port *port, struct console *co,
 	/*
 	 * Ensure that the serial-console lock is initialised early.
 	 *
-	 * Note that the console-enabled check is needed because of kgdboc,
-	 * which can end up calling uart_set_options() for an already enabled
+	 * Note that the console-registered check is needed because
+	 * kgdboc can call uart_set_options() for an already registered
 	 * console via tty_find_polling_driver() and uart_poll_init().
 	 */
-	if (!uart_console_enabled(port) && !port->console_reinit)
+	if (!uart_console_registered_locked(port) && !port->console_reinit)
 		uart_port_spin_lock_init(port);
 
 	memset(&termios, 0, sizeof(struct ktermios));
@@ -2573,7 +2573,7 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 		 * successfully registered yet, try to re-register it.
 		 * It may be that the port was not available.
 		 */
-		if (port->cons && !(port->cons->flags & CON_ENABLED))
+		if (port->cons && !console_is_registered(port->cons))
 			register_console(port->cons);
 
 		/*
@@ -2956,7 +2956,7 @@ static ssize_t console_show(struct device *dev,
 	mutex_lock(&port->mutex);
 	uport = uart_port_check(state);
 	if (uport)
-		console = uart_console_enabled(uport);
+		console = uart_console_registered(uport);
 	mutex_unlock(&port->mutex);
 
 	return sprintf(buf, "%c\n", console ? 'Y' : 'N');
@@ -2978,7 +2978,7 @@ static ssize_t console_store(struct device *dev,
 	mutex_lock(&port->mutex);
 	uport = uart_port_check(state);
 	if (uport) {
-		oldconsole = uart_console_enabled(uport);
+		oldconsole = uart_console_registered(uport);
 		if (oldconsole && !newconsole) {
 			ret = unregister_console(uport->cons);
 		} else if (!oldconsole && newconsole) {
@@ -3086,7 +3086,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 	 * If this port is in use as a console then the spinlock is already
 	 * initialised.
 	 */
-	if (!uart_console_enabled(uport))
+	if (!uart_console_registered(uport))
 		uart_port_spin_lock_init(uport);
 
 	if (uport->cons && uport->dev)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 62f773286d44..76452fe2af86 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -3054,15 +3054,29 @@ static struct console serial_console = {
 };
 
 #ifdef CONFIG_SUPERH
+static char early_serial_buf[32];
+
+static int early_serial_console_setup(struct console *co, char *options)
+{
+	/*
+	 * This early console is always registered using the earlyprintk=
+	 * parameter, which does not call add_preferred_console(). Thus
+	 * @options is always NULL and the options for this early console
+	 * are passed using a custom buffer.
+	 */
+	WARN_ON(options);
+
+	return serial_console_setup(co, early_serial_buf);
+}
+
 static struct console early_serial_console = {
 	.name           = "early_ttySC",
 	.write          = serial_console_write,
+	.setup		= early_serial_console_setup,
 	.flags          = CON_PRINTBUFFER,
 	.index		= -1,
 };
 
-static char early_serial_buf[32];
-
 static int sci_probe_earlyprintk(struct platform_device *pdev)
 {
 	const struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev);
@@ -3074,8 +3088,6 @@ static int sci_probe_earlyprintk(struct platform_device *pdev)
 
 	sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
 
-	serial_console_setup(&early_serial_console, early_serial_buf);
-
 	if (!strstr(early_serial_buf, "keep"))
 		early_serial_console.flags |= CON_BOOT;
 
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 2eff7cff57c4..0cbd1892c53b 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1631,7 +1631,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
 	/* This is not port which is used for console that's why clean it up */
 	if (console_port == port &&
-	    !(cdns_uart_uart_driver.cons->flags & CON_ENABLED)) {
+	    !console_is_registered(cdns_uart_uart_driver.cons)) {
 		console_port = NULL;
 		cdns_uart_console.index = -1;
 	}