diff options
author | Denis V. Lunev <den@openvz.org> | 2012-10-21 12:00:30 +0800 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-10-24 11:38:28 -0700 |
commit | e1a9c17969f0aa60cb00f1f777b33a07f4e84883 (patch) | |
tree | 9a9b9308c1fcf1d482ceed19a9ed5513980221fd /drivers/tty/serial/pxa.c | |
parent | c97399418a25b18943c9910fb28e0ee5ecc3c316 (diff) | |
download | linux-e1a9c17969f0aa60cb00f1f777b33a07f4e84883.tar.bz2 |
tty: serial: KGDB support for PXA
Actually, in order to support KGDB over serial console one must
implement two callbacks for character polling. Clone them from
8250 driver with a bit of tuning.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Marko Katic <dromede@gmail.com>
CC: Eric Miao <eric.y.miao@gmail.com>
CC: Russell King <linux@arm.linux.org.uk>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
drivers/tty/serial/pxa.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 55 insertions(+), 0 deletions(-)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/pxa.c')
-rw-r--r-- | drivers/tty/serial/pxa.c | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 9033fc6e0e4e..2764828251f5 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -705,6 +705,57 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count) clk_disable_unprepare(up->clk); } +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial_pxa_get_poll_char(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char lsr = serial_in(up, UART_LSR); + + while (!(lsr & UART_LSR_DR)) + lsr = serial_in(up, UART_LSR); + + return serial_in(up, UART_RX); +} + + +static void serial_pxa_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, UART_IER_UUE); + + wait_for_xmitr(up); + /* + * Send the character out. + * If a LF, also do CR... + */ + serial_out(up, UART_TX, c); + if (c == 10) { + wait_for_xmitr(up); + serial_out(up, UART_TX, 13); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + static int __init serial_pxa_console_setup(struct console *co, char *options) { @@ -759,6 +810,10 @@ struct uart_ops serial_pxa_pops = { .request_port = serial_pxa_request_port, .config_port = serial_pxa_config_port, .verify_port = serial_pxa_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial_pxa_get_poll_char, + .poll_put_char = serial_pxa_put_poll_char, +#endif }; static struct uart_driver serial_pxa_reg = { |