diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2017-09-13 10:18:29 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-09-18 18:36:25 +0200 |
commit | dde18d53d72d06c30a925ca73986f711102b064e (patch) | |
tree | a441d4dac27e829b1f8e1012c4350953d98b564b /drivers/tty/serial/fsl_lpuart.c | |
parent | 79d9e95a05c13647ccc68c5115b0ff6d21e53ab4 (diff) | |
download | linux-dde18d53d72d06c30a925ca73986f711102b064e.tar.bz2 |
serial: fsl_lpuart: Use common rs485 device tree parsing function
We just got a common helper for parsing the rs485 specific
device tree properties. Use it and drop the open coded parser.
As a side effect this adds support for parsing rs485-rts-delay and
rs485-rx-during-tx. As the driver doesn't support this though, probing
fails if these are defined.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/fsl_lpuart.c')
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 24 |
1 files changed, 18 insertions, 6 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 63f99a0b533f..eac35d4aa4c7 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2222,6 +2222,24 @@ static int lpuart_probe(struct platform_device *pdev) return ret; } + of_get_rs485_mode(np, &sport->port.rs485); + + if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) { + dev_err(&pdev->dev, "driver doesn't support RX during TX\n"); + return -ENOSYS; + } + + if (sport->port.rs485.delay_rts_before_send || + sport->port.rs485.delay_rts_after_send) { + dev_err(&pdev->dev, "driver doesn't support RTS delays\n"); + return -ENOSYS; + } + + if (sport->port.rs485.flags & SER_RS485_ENABLED) { + sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND; + writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM); + } + sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx"); if (!sport->dma_tx_chan) dev_info(sport->port.dev, "DMA tx channel request failed, " @@ -2232,12 +2250,6 @@ static int lpuart_probe(struct platform_device *pdev) dev_info(sport->port.dev, "DMA rx channel request failed, " "operating without rx DMA\n"); - if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time")) { - sport->port.rs485.flags |= SER_RS485_ENABLED; - sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND; - writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM); - } - return 0; } |