diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-31 11:28:31 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-31 11:28:31 -0800 |
commit | c5951e7c8ee5cb04b8b41c32bf567b90117a2124 (patch) | |
tree | fae1fde52d66ba050759d85272c62ddc57916061 /drivers/tty/serial/8250/8250_ioc3.c | |
parent | b7e573bb4a7a511741f8942b1fb03cfe602ee57f (diff) | |
parent | 2c4288719806ca0b3de1b742ada26b25a60d6a45 (diff) | |
download | linux-c5951e7c8ee5cb04b8b41c32bf567b90117a2124.tar.bz2 |
Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS changes from Paul Burton:
"Nothing too big or scary in here:
- Support mremap() for the VDSO, primarily to allow CRIU to restore
the VDSO to its checkpointed location.
- Restore the MIPS32 cBPF JIT, after having reverted the enablement
of the eBPF JIT for MIPS32 systems in the 5.5 cycle.
- Improve cop0 counter synchronization behaviour whilst onlining CPUs
by running with interrupts disabled.
- Better match FPU behaviour when emulating multiply-accumulate
instructions on pre-r6 systems that implement IEEE754-2008 style
MACs.
- Loongson64 kernels now build using the MIPS64r2 ISA, allowing them
to take advantage of instructions introduced by r2.
- Support for the Ingenic X1000 SoC & the really nice little CU Neo
development board that's using it.
- Support for WMAC on GARDENA Smart Gateway devices.
- Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in
preparation for introducing IP35 (Origin 3*) support.
- Various Kconfig & Makefile cleanups"
* tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits)
MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel
MIPS: Loongson64: Disable exec hazard
MIPS: Loongson64: Bump ISA level to MIPSR2
MIPS: Make DIEI support as a config option
MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too"
MIPS: asm: local: add barriers for Loongson
MIPS: Loongson64: Select mac2008 only feature
MIPS: Add MAC2008 Support
Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel"
MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again)
MIPS: make CPU_HAS_LOAD_STORE_LR opt-out
MIPS: generic: don't unconditionally select PINCTRL
MIPS: don't explicitly select LIBFDT in Kconfig
MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts
MIPS: SGI-IP30: Check for valid pointer before using it
MIPS: syscalls: fix indentation of the 'SYSNR' message
MIPS: boot: fix typo in 'vmlinux.lzma.its' target
MIPS: fix indentation of the 'RELOCS' message
dt-bindings: Document loongson vendor-prefix
MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi.
...
Diffstat (limited to 'drivers/tty/serial/8250/8250_ioc3.c')
-rw-r--r-- | drivers/tty/serial/8250/8250_ioc3.c | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250_ioc3.c b/drivers/tty/serial/8250/8250_ioc3.c new file mode 100644 index 000000000000..4c405f1b9c67 --- /dev/null +++ b/drivers/tty/serial/8250/8250_ioc3.c @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SGI IOC3 8250 UART driver + * + * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de> + * + * based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org> + * Copyright (C) 2014 Joshua Kinard <kumba@gentoo.org> + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/platform_device.h> + +#include "8250.h" + +#define IOC3_UARTCLK (22000000 / 3) + +struct ioc3_8250_data { + int line; +}; + +static unsigned int ioc3_serial_in(struct uart_port *p, int offset) +{ + return readb(p->membase + (offset ^ 3)); +} + +static void ioc3_serial_out(struct uart_port *p, int offset, int value) +{ + writeb(value, p->membase + (offset ^ 3)); +} + +static int serial8250_ioc3_probe(struct platform_device *pdev) +{ + struct ioc3_8250_data *data; + struct uart_8250_port up; + struct resource *r; + void __iomem *membase; + int irq, line; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -ENODEV; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + membase = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r)); + if (!membase) + return -ENOMEM; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + irq = 0; /* no interrupt -> use polling */ + + /* Register serial ports with 8250.c */ + memset(&up, 0, sizeof(struct uart_8250_port)); + up.port.iotype = UPIO_MEM; + up.port.uartclk = IOC3_UARTCLK; + up.port.type = PORT_16550A; + up.port.irq = irq; + up.port.flags = (UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ); + up.port.dev = &pdev->dev; + up.port.membase = membase; + up.port.mapbase = r->start; + up.port.serial_in = ioc3_serial_in; + up.port.serial_out = ioc3_serial_out; + line = serial8250_register_8250_port(&up); + if (line < 0) + return line; + + platform_set_drvdata(pdev, data); + return 0; +} + +static int serial8250_ioc3_remove(struct platform_device *pdev) +{ + struct ioc3_8250_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + return 0; +} + +static struct platform_driver serial8250_ioc3_driver = { + .probe = serial8250_ioc3_probe, + .remove = serial8250_ioc3_remove, + .driver = { + .name = "ioc3-serial8250", + } +}; + +module_platform_driver(serial8250_ioc3_driver); + +MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>"); +MODULE_DESCRIPTION("SGI IOC3 8250 UART driver"); +MODULE_LICENSE("GPL"); |