diff options
author | Takashi Iwai <tiwai@suse.de> | 2018-12-18 14:59:56 +0100 |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2018-12-18 14:59:56 +0100 |
commit | ed49e839199e73966b9ff5946c3e87759827b40e (patch) | |
tree | dd1e6c755b2f6e747b99af9123e045b513553623 /drivers/thermal/st/stm_thermal.c | |
parent | 40906ebe3af6a48457151b3c6726b480f6a6cb13 (diff) | |
parent | a7a850dba82498a1e050d8d153cae67ce0edb3b2 (diff) | |
download | linux-ed49e839199e73966b9ff5946c3e87759827b40e.tar.bz2 |
Merge tag 'asoc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v4.21
Not much work on the core this time around but we've seen quite a bit of
driver work, including on the generic DT drivers. There's also a large
part of the diff from a merge of the DaVinci and OMAP directories, along
with some active development there:
- Preparatory work from Morimoto-san for merging the audio-graph and
audio-graph-scu cards.
- A merge of the TI OMAP and DaVinci directories, the OMAP product line
has been merged into the DaVinci product line so there is now a lot
of IP sharing which meant that the split directories just got in the
way. This has pulled in a few architecture changes as well.
- A big cleanup of the Maxim MAX9867 driver from Ladislav Michl.
- Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S
controllers.
Diffstat (limited to 'drivers/thermal/st/stm_thermal.c')
-rw-r--r-- | drivers/thermal/st/stm_thermal.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c index 47623da0f91b..bbd73c5a4a4e 100644 --- a/drivers/thermal/st/stm_thermal.c +++ b/drivers/thermal/st/stm_thermal.c @@ -241,8 +241,8 @@ static int stm_thermal_read_factory_settings(struct stm_thermal_sensor *sensor) sensor->t0 = TS1_T0_VAL1; /* Retrieve fmt0 and put it on Hz */ - sensor->fmt0 = ADJUST * readl_relaxed(sensor->base + DTS_T0VALR1_OFFSET) - & TS1_FMT0_MASK; + sensor->fmt0 = ADJUST * (readl_relaxed(sensor->base + + DTS_T0VALR1_OFFSET) & TS1_FMT0_MASK); /* Retrieve ramp coefficient */ sensor->ramp_coeff = readl_relaxed(sensor->base + DTS_RAMPVALR_OFFSET) & @@ -532,6 +532,10 @@ static int stm_thermal_prepare(struct stm_thermal_sensor *sensor) if (ret) return ret; + ret = stm_thermal_read_factory_settings(sensor); + if (ret) + goto thermal_unprepare; + ret = stm_thermal_calibration(sensor); if (ret) goto thermal_unprepare; @@ -636,10 +640,6 @@ static int stm_thermal_probe(struct platform_device *pdev) /* Populate sensor */ sensor->base = base; - ret = stm_thermal_read_factory_settings(sensor); - if (ret) - return ret; - sensor->clk = devm_clk_get(&pdev->dev, "pclk"); if (IS_ERR(sensor->clk)) { dev_err(&pdev->dev, "%s: failed to fetch PCLK clock\n", |