staging: wlan-ng: use netdev_() instead of printk()

Replaced all uses of printk() in wlan-ng with netdev_err / _warn
where a netdev exists. If a few cases where a netdev does not yet
exist, dev_ or pr_ was used.

Checkpatch complains about lines over 80 chars or split string
constants - the messages are just too long, keeping it completely
happy would make the code less readable.

Signed-off-by: Vitaly Osipov <vitaly.osipov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 67 insertions, 56 deletions

diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c
index a9909f6b0001..d110b362c3bd 100644
--- a/drivers/staging/wlan-ng/prism2mgmt.c
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -129,8 +129,8 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 				     hw->ident_sta_fw.minor,
 				     hw->ident_sta_fw.variant) <
 	    HFA384x_FIRMWARE_VERSION(1, 3, 2)) {
-		printk(KERN_ERR
-		       "HostScan not supported with current firmware (<1.3.2).\n");
+		netdev_err(wlandev->netdev,
+			   "HostScan not supported with current firmware (<1.3.2).\n");
 		result = 1;
 		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
 		goto exit;
@@ -143,8 +143,8 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 					  HFA384x_RID_CNFROAMINGMODE,
 					  &roamingmode);
 	if (result) {
-		printk(KERN_ERR "getconfig(ROAMMODE) failed. result=%d\n",
-		       result);
+		netdev_err(wlandev->netdev,
+			   "getconfig(ROAMMODE) failed. result=%d\n", result);
 		msg->resultcode.data =
 		    P80211ENUM_resultcode_implementation_failure;
 		goto exit;
@@ -155,8 +155,8 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 					  HFA384x_RID_CNFROAMINGMODE,
 					  HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
 	if (result) {
-		printk(KERN_ERR "setconfig(ROAMINGMODE) failed. result=%d\n",
-		       result);
+		netdev_err(wlandev->netdev,
+			   "setconfig(ROAMINGMODE) failed. result=%d\n", result);
 		msg->resultcode.data =
 		    P80211ENUM_resultcode_implementation_failure;
 		goto exit;
@@ -176,8 +176,9 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 		    hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPASSIVESCANCTRL,
 					     word);
 		if (result) {
-			printk(KERN_WARNING "Passive scan not supported with "
-			       "current firmware.  (<1.5.1)\n");
+			netdev_warn(wlandev->netdev,
+				    "Passive scan not supported with "
+				    "current firmware.  (<1.5.1)\n");
 		}
 	}
 
@@ -203,8 +204,8 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 	/* Enable the MAC port if it's not already enabled  */
 	result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_PORTSTATUS, &word);
 	if (result) {
-		printk(KERN_ERR "getconfig(PORTSTATUS) failed. "
-		       "result=%d\n", result);
+		netdev_err(wlandev->netdev,
+			   "getconfig(PORTSTATUS) failed. result=%d\n", result);
 		msg->resultcode.data =
 		    P80211ENUM_resultcode_implementation_failure;
 		goto exit;
@@ -216,9 +217,9 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 					HFA384x_RID_CNFROAMINGMODE,
 					HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
 		if (result) {
-			printk(KERN_ERR
-			       "setconfig(ROAMINGMODE) failed. result=%d\n",
-			       result);
+			netdev_err(wlandev->netdev,
+				   "setconfig(ROAMINGMODE) failed. result=%d\n",
+				   result);
 			msg->resultcode.data =
 			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
@@ -232,7 +233,7 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 						wordbuf,
 						HFA384x_RID_CNFOWNSSID_LEN);
 		if (result) {
-			printk(KERN_ERR "Failed to set OwnSSID.\n");
+			netdev_err(wlandev->netdev, "Failed to set OwnSSID.\n");
 			msg->resultcode.data =
 			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
@@ -241,7 +242,8 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 						wordbuf,
 						HFA384x_RID_CNFDESIREDSSID_LEN);
 		if (result) {
-			printk(KERN_ERR "Failed to set DesiredSSID.\n");
+			netdev_err(wlandev->netdev,
+				   "Failed to set DesiredSSID.\n");
 			msg->resultcode.data =
 			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
@@ -251,7 +253,8 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 						  HFA384x_RID_CNFPORTTYPE,
 						  HFA384x_PORTTYPE_IBSS);
 		if (result) {
-			printk(KERN_ERR "Failed to set CNFPORTTYPE.\n");
+			netdev_err(wlandev->netdev,
+				   "Failed to set CNFPORTTYPE.\n");
 			msg->resultcode.data =
 			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
@@ -261,15 +264,16 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 					HFA384x_RID_CREATEIBSS,
 					HFA384x_CREATEIBSS_JOINCREATEIBSS);
 		if (result) {
-			printk(KERN_ERR "Failed to set CREATEIBSS.\n");
+			netdev_err(wlandev->netdev,
+				   "Failed to set CREATEIBSS.\n");
 			msg->resultcode.data =
 			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
 		}
 		result = hfa384x_drvr_enable(hw, 0);
 		if (result) {
-			printk(KERN_ERR "drvr_enable(0) failed. "
-			       "result=%d\n", result);
+			netdev_err(wlandev->netdev,
+				   "drvr_enable(0) failed. result=%d\n", result);
 			msg->resultcode.data =
 			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
@@ -288,8 +292,8 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 					HFA384x_RID_HOSTSCAN, &scanreq,
 					sizeof(hfa384x_HostScanRequest_data_t));
 	if (result) {
-		printk(KERN_ERR "setconfig(SCANREQUEST) failed. result=%d\n",
-		       result);
+		netdev_err(wlandev->netdev,
+			   "setconfig(SCANREQUEST) failed. result=%d\n", result);
 		msg->resultcode.data =
 		    P80211ENUM_resultcode_implementation_failure;
 		goto exit;
@@ -310,8 +314,8 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 	if (istmpenable) {
 		result = hfa384x_drvr_disable(hw, 0);
 		if (result) {
-			printk(KERN_ERR "drvr_disable(0) failed. "
-			       "result=%d\n", result);
+			netdev_err(wlandev->netdev,
+				   "drvr_disable(0) failed. result=%d\n", result);
 			msg->resultcode.data =
 			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
@@ -322,8 +326,8 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE,
 					  roamingmode);
 	if (result) {
-		printk(KERN_ERR "setconfig(ROAMMODE) failed. result=%d\n",
-		       result);
+		netdev_err(wlandev->netdev,
+			   "setconfig(ROAMMODE) failed. result=%d\n", result);
 		msg->resultcode.data =
 		    P80211ENUM_resultcode_implementation_failure;
 		goto exit;
@@ -372,8 +376,9 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
 	req->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 
 	if (!hw->scanresults) {
-		printk(KERN_ERR
-		       "dot11req_scan_results can only be used after a successful dot11req_scan.\n");
+		netdev_err(wlandev->netdev,
+			   "dot11req_scan_results can only be used after "
+			   "a successful dot11req_scan.\n");
 		result = 2;
 		req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
 		goto exit;
@@ -555,14 +560,14 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
 					bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
 	if (result) {
-		printk(KERN_ERR "Failed to set CnfOwnSSID\n");
+		netdev_err(wlandev->netdev, "Failed to set CnfOwnSSID\n");
 		goto failed;
 	}
 	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
 					bytebuf,
 					HFA384x_RID_CNFDESIREDSSID_LEN);
 	if (result) {
-		printk(KERN_ERR "Failed to set CnfDesiredSSID\n");
+		netdev_err(wlandev->netdev, "Failed to set CnfDesiredSSID\n");
 		goto failed;
 	}
 
@@ -574,7 +579,8 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 	word = msg->beaconperiod.data;
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNint, word);
 	if (result) {
-		printk(KERN_ERR "Failed to set beacon period=%d.\n", word);
+		netdev_err(wlandev->netdev,
+			   "Failed to set beacon period=%d.\n", word);
 		goto failed;
 	}
 
@@ -582,7 +588,8 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 	word = msg->dschannel.data;
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
 	if (result) {
-		printk(KERN_ERR "Failed to set channel=%d.\n", word);
+		netdev_err(wlandev->netdev,
+			   "Failed to set channel=%d.\n", word);
 		goto failed;
 	}
 	/* Basic rates */
@@ -610,7 +617,8 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
 	if (result) {
-		printk(KERN_ERR "Failed to set basicrates=%d.\n", word);
+		netdev_err(wlandev->netdev,
+			   "Failed to set basicrates=%d.\n", word);
 		goto failed;
 	}
 
@@ -639,13 +647,14 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
 	if (result) {
-		printk(KERN_ERR "Failed to set supprates=%d.\n", word);
+		netdev_err(wlandev->netdev,
+			   "Failed to set supprates=%d.\n", word);
 		goto failed;
 	}
 
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
 	if (result) {
-		printk(KERN_ERR "Failed to set txrates=%d.\n", word);
+		netdev_err(wlandev->netdev, "Failed to set txrates=%d.\n", word);
 		goto failed;
 	}
 
@@ -659,7 +668,8 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 	/* Enable the Port */
 	result = hfa384x_drvr_enable(hw, 0);
 	if (result) {
-		printk(KERN_ERR "Enable macport failed, result=%d.\n", result);
+		netdev_err(wlandev->netdev,
+			   "Enable macport failed, result=%d.\n", result);
 		goto failed;
 	}
 
@@ -704,8 +714,8 @@ int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
 	 * state.
 	 */
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
-		printk(KERN_ERR
-		       "PDA may only be read " "in the fwload state.\n");
+		netdev_err(wlandev->netdev,
+			   "PDA may only be read in the fwload state.\n");
 		msg->resultcode.data =
 		    P80211ENUM_resultcode_implementation_failure;
 		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
@@ -717,9 +727,9 @@ int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
 					      msg->pda.data,
 					      HFA384x_PDA_LEN_MAX);
 		if (result) {
-			printk(KERN_ERR
-			       "hfa384x_drvr_readpda() failed, "
-			       "result=%d\n", result);
+			netdev_err(wlandev->netdev,
+				   "hfa384x_drvr_readpda() failed, "
+				   "result=%d\n", result);
 
 			msg->resultcode.data =
 			    P80211ENUM_resultcode_implementation_failure;
@@ -766,9 +776,9 @@ int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp)
 	struct p80211msg_p2req_ramdl_state *msg = msgp;
 
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
-		printk(KERN_ERR
-		       "ramdl_state(): may only be called "
-		       "in the fwload state.\n");
+		netdev_err(wlandev->netdev,
+			   "ramdl_state(): may only be called "
+			   "in the fwload state.\n");
 		msg->resultcode.data =
 		    P80211ENUM_resultcode_implementation_failure;
 		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
@@ -825,9 +835,9 @@ int prism2mgmt_ramdl_write(wlandevice_t *wlandev, void *msgp)
 	u8 *buf;
 
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
-		printk(KERN_ERR
-		       "ramdl_write(): may only be called "
-		       "in the fwload state.\n");
+		netdev_err(wlandev->netdev,
+			   "ramdl_write(): may only be called "
+			   "in the fwload state.\n");
 		msg->resultcode.data =
 		    P80211ENUM_resultcode_implementation_failure;
 		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
@@ -885,9 +895,9 @@ int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
 	struct p80211msg_p2req_flashdl_state *msg = msgp;
 
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
-		printk(KERN_ERR
-		       "flashdl_state(): may only be called "
-		       "in the fwload state.\n");
+		netdev_err(wlandev->netdev,
+			   "flashdl_state(): may only be called "
+			   "in the fwload state.\n");
 		msg->resultcode.data =
 		    P80211ENUM_resultcode_implementation_failure;
 		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
@@ -920,8 +930,9 @@ int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
 		wlandev->msdstate = WLAN_MSD_HWPRESENT;
 		result = prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
 		if (result != P80211ENUM_resultcode_success) {
-			printk(KERN_ERR "prism2sta_ifstate(fwload) failed,"
-			       "P80211ENUM_resultcode=%d\n", result);
+			netdev_err(wlandev->netdev,
+				   "prism2sta_ifstate(fwload) failed,"
+				   "P80211ENUM_resultcode=%d\n", result);
 			msg->resultcode.data =
 			    P80211ENUM_resultcode_implementation_failure;
 			result = -1;
@@ -958,9 +969,9 @@ int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp)
 	u8 *buf;
 
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
-		printk(KERN_ERR
-		       "flashdl_write(): may only be called "
-		       "in the fwload state.\n");
+		netdev_err(wlandev->netdev,
+			   "flashdl_write(): may only be called "
+			   "in the fwload state.\n");
 		msg->resultcode.data =
 		    P80211ENUM_resultcode_implementation_failure;
 		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
@@ -1153,7 +1164,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 
 		}
 
-		printk(KERN_INFO "monitor mode disabled\n");
+		netdev_info(wlandev->netdev, "monitor mode disabled\n");
 		msg->resultcode.data = P80211ENUM_resultcode_success;
 		result = 0;
 		goto exit;
@@ -1282,7 +1293,7 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 		}
 
 		if (wlandev->netdev->type == ARPHRD_ETHER)
-			printk(KERN_INFO "monitor mode enabled\n");
+			netdev_info(wlandev->netdev, "monitor mode enabled\n");
 
 		/* Set the driver state */
 		/* Do we want the prism2 header? */