Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the "big" staging and IIO driver update for 4.15-rc1.

  Lots and lots of little changes, almost all minor code cleanups as the
  Outreachy application process happened during this development cycle.
  Also happened was a lot of IIO driver activity, and the typec USB code
  moving out of staging to drivers/usb (same commits are in the USB tree
  on a persistent branch to not cause merge issues.)

  Overall, it's a wash, I think we added a few hundred more lines than
  removed, but really only a few thousand were modified at all.

  All of these have been in linux-next for a while. There might be a
  merge issue with Al's vfs tree in the pi433 driver (take his changes,
  they are always better), and the media tree with some of the odd
  atomisp cleanups (take the media tree's version)"

* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...

1 files changed, 29 insertions, 17 deletions

diff --git a/drivers/staging/rtl8188eu/include/odm.h b/drivers/staging/rtl8188eu/include/odm.h
index 4fb3bb07ceaa..95426b7c6dbf 100644
--- a/drivers/staging/rtl8188eu/include/odm.h
+++ b/drivers/staging/rtl8188eu/include/odm.h
@@ -36,7 +36,8 @@
 /*  Mainly, it just retains last scan result and scan again. */
 /*  After that, it compares the scan result to see which one gets better
  *  RSSI. It selects antenna with better receiving power and returns better
- *  scan result. */
+ *  scan result.
+ */
 
 #define	TP_MODE			0
 #define	RSSI_MODE		1
@@ -173,10 +174,12 @@ struct rx_hpc {
 
 /*  This indicates two different steps. */
 /*  In SWAW_STEP_PEAK, driver needs to switch antenna and listen to
- *  the signal on the air. */
+ *  the signal on the air.
+ */
 /*  In SWAW_STEP_DETERMINE, driver just compares the signal captured in
  *  SWAW_STEP_PEAK with original RSSI to determine if it is necessary to
- *  switch antenna. */
+ *  switch antenna.
+ */
 
 #define SWAW_STEP_PEAK		0
 #define SWAW_STEP_DETERMINE	1
@@ -265,7 +268,8 @@ struct odm_phy_status_info {
 	s8	RxPower; /*  in dBm Translate from PWdB */
 	s8	RecvSignalPower;/*  Real power in dBm for this packet, no
 				 * beautification and aggregation. Keep this raw
-				 * info to be used for the other procedures. */
+				 * info to be used for the other procedures.
+				 */
 	u8	BTRxRSSIPercentage;
 	u8	SignalStrength; /*  in 0-100 index. */
 	u8	RxPwr[MAX_PATH_NUM_92CS];/* per-path's pwdb */
@@ -478,7 +482,7 @@ enum odm_operation_mode {
 
 /*  ODM_CMNINFO_WM_MODE */
 enum odm_wireless_mode {
-	ODM_WM_UNKNOW	= 0x0,
+	ODM_WM_UNKNOWN	= 0x0,
 	ODM_WM_B	= BIT(0),
 	ODM_WM_G	= BIT(1),
 	ODM_WM_A	= BIT(2),
@@ -509,7 +513,7 @@ enum odm_security {
 	ODM_SEC_RESERVE		= 3,
 	ODM_SEC_AESCCMP		= 4,
 	ODM_SEC_WEP104		= 5,
-	ODM_WEP_WPA_MIXED   	= 6, /*  WEP + WPA */
+	ODM_WEP_WPA_MIXED	= 6, /*  WEP + WPA */
 	ODM_SEC_SMS4		= 7,
 };
 
@@ -567,7 +571,8 @@ struct odm_ra_info {
 	u8 PTPreRssi;	/*  if RSSI change 5% do PT */
 	u8 PTModeSS;	/*  decide whitch rate should do PT */
 	u8 RAstage;	/*  StageRA, decide how many times RA will be done
-			 * between PT */
+			 * between PT
+			 */
 	u8 PTSmoothFactor;
 };
 
@@ -587,12 +592,14 @@ struct odm_rf_cal {
 	u8	TXPowercount;
 	bool	bTXPowerTracking;
 	u8	TxPowerTrackControl; /* for mp mode, turn off txpwrtracking
-				      * as default */
+				      * as default
+				      */
 	u8	TM_Trigger;
 	u8	InternalPA5G[2];	/* pathA / pathB */
 
 	u8	ThermalMeter[2];    /* ThermalMeter, index 0 for RFIC0,
-				     * and 1 for RFIC1 */
+				     * and 1 for RFIC1
+				     */
 	u8	ThermalValue;
 	u8	ThermalValue_LCK;
 	u8	ThermalValue_IQK;
@@ -688,7 +695,7 @@ enum ant_div_type {
 
 /* Copy from SD4 defined structure. We use to support PHY DM integration. */
 struct odm_dm_struct {
-	/* 	Add for different team use temporarily */
+	/*	Add for different team use temporarily */
 	struct adapter *Adapter;	/*  For CE/NIC team */
 	struct rtl8192cd_priv *priv;	/*  For AP/ADSL team */
 	/*  WHen you use above pointers, they must be initialized. */
@@ -714,7 +721,8 @@ struct odm_dm_struct {
 	/*  ODM PCIE/USB/SDIO/GSPI = 0/1/2/3 */
 	u8	SupportInterface;
 	/*  ODM composite or independent. Bit oriented/ 92C+92D+ .... or any
-	 *  other type = 1/2/3/... */
+	 *  other type = 1/2/3/...
+	 */
 	u32	SupportICType;
 	/*  Cut Version TestChip/A-cut/B-cut... = 0/1/2/3/... */
 	u8	CutVersion;
@@ -788,19 +796,21 @@ struct odm_dm_struct {
 	bool	bBtHsOperation;	/*  BT HS mode is under progress */
 	u8	btHsDigVal;	/*  use BT rssi to decide the DIG value */
 	bool	bBtDisableEdcaTurbo;/* Under some condition, don't enable the
-				     * EDCA Turbo */
+				     * EDCA Turbo
+				     */
 	bool	bBtBusy;			/*  BT is busy. */
 /* CALL BY VALUE------------- */
 
 	/* 2 Define STA info. */
 	/*  _ODM_STA_INFO */
-	/*  For MP, we need to reduce one array pointer for default port.?? */
+	/*  For MP, we need to reduce one array pointer for default port.??*/
 	struct sta_info *pODM_StaInfo[ODM_ASSOCIATE_ENTRY_NUM];
 
 	u16	CurrminRptTime;
 	struct odm_ra_info RAInfo[ODM_ASSOCIATE_ENTRY_NUM]; /* Use MacID as
-			* array index. STA MacID=0,
-			* VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} */
+							     * array index. STA MacID=0,
+							     * VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1}
+							     */
 	/*  */
 	/*  2012/02/14 MH Add to share 88E ra with other SW team. */
 	/*  We need to colelct all support abilit to a proper area. */
@@ -1029,9 +1039,11 @@ extern	u8 CCKSwingTable_Ch14[CCK_TABLE_SIZE][8];
 /*  20100514 Joseph: Add definition for antenna switching test after link. */
 /*  This indicates two different the steps. */
 /*  In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the
- *  signal on the air. */
+ *  signal on the air.
+ */
 /*  In SWAW_STEP_DETERMINE, driver just compares the signal captured in
- *  SWAW_STEP_PEAK */
+ *  SWAW_STEP_PEAK
+ */
 /*  with original RSSI to determine if it is necessary to switch antenna. */
 #define SWAW_STEP_PEAK		0
 #define SWAW_STEP_DETERMINE	1